Skip to contentSkip to conversation

dt-bindings: pinctrl: renesas,pfc: align example GPIO hog name with dtschema

PATCH In review Krzysztof Kozlowski 2 participants 2 messages Sep 28, 2020 – Sep 29, 2020

Subsystems (4)
Device tree bindings GPIO Pin control Pin controller - Renesas
lore
Share & tools
lore

Krzysztof Kozlowski

author
#0 lore raw

PATCH 1/1 dt-bindings: pinctrl: renesas,pfc: align example GPIO hog name with dtschema

The convention for node names is to use hyphens, not underscores. dtschema expects GPIO hogs to end with 'hog' suffix. Adjust the example DTS in the binding. No changes to binding itself.

Reported-by Rob Herring <[email protected]>
Signed-off-by Krzysztof Kozlowski <[email protected]>
---
 Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml +1 -1
index 4efe117550bd..5b5b1b9d2ec7 100644
@@ -148,7 +148,7 @@ examples:
                 <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
             power-domains = <&pd_c5>;
 
-            lcd0_mux {
+            lcd0-mux-hog {
                     /* DBGMD/LCDC0/FSIA MUX */
                     gpio-hog;
                     gpios = <176 0>;
Signature · 1 line
2.17.1