Skip to contentSkip to conversation

4.14.200-rc1 review

PATCH In review Greg Kroah-Hartman 5 participants 171 messages Sep 29, 2020 – Oct 1, 2020 Page 1 of 2

Subsystems (7)
lore
Share & tools
lore
author maintainer
#89 lore raw

PATCH 89/166 perf cpumap: Fix snprintf overflow check

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit d74b181a028bb5a468f0c609553eff6a8fdf4887 ]

'snprintf' returns the number of characters which would be generated for the given input.

If the returned value is *greater than* or equal to the buffer size, it means that the output has been truncated.

Fix the overflow test accordingly.

Fixes 7780c25bae59f ("perf tools: Allow ability to map cpus to nodes easily")
Fixes 92a7e1278005b ("perf cpumap: Add cpu__max_present_cpu()")
Cc Alexander Shishkin <[email protected]>
Cc Don Zickus <[email protected]>
Cc He Zhe <[email protected]>
Cc Jan Stancek <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Kan Liang <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 tools/perf/util/cpumap.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
tools/perf/util/cpumap.c +5 -5
index f93846edc1e0d..827d844f4efb1 100644
@@ -462,7 +462,7 @@ static void set_max_cpu_num(void)
 
 	/* get the highest possible cpu number for a sparse allocation */
 	ret = snprintf(path, PATH_MAX, "%s/devices/system/cpu/possible", mnt);
-	if (ret = PATH_MAX) {
+	if (ret >= PATH_MAX) {
 		pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX);
 		goto out;
 	}
@@ -473,7 +473,7 @@ static void set_max_cpu_num(void)
 
 	/* get the highest present cpu number for a sparse allocation */
 	ret = snprintf(path, PATH_MAX, "%s/devices/system/cpu/present", mnt);
-	if (ret = PATH_MAX) {
+	if (ret >= PATH_MAX) {
 		pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX);
 		goto out;
 	}
@@ -501,7 +501,7 @@ static void set_max_node_num(void)
 
 	/* get the highest possible cpu number for a sparse allocation */
 	ret = snprintf(path, PATH_MAX, "%s/devices/system/node/possible", mnt);
-	if (ret = PATH_MAX) {
+	if (ret >= PATH_MAX) {
 		pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX);
 		goto out;
 	}
@@ -586,7 +586,7 @@ int cpu__setup_cpunode_map(void)
 		return 0;
 
 	n = snprintf(path, PATH_MAX, "%s/devices/system/node", mnt);
-	if (n = PATH_MAX) {
+	if (n >= PATH_MAX) {
 		pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX);
 		return -1;
 	}
@@ -601,7 +601,7 @@ int cpu__setup_cpunode_map(void)
 			continue;
 
 		n = snprintf(buf, PATH_MAX, "%s/%s", path, dent1->d_name);
-		if (n = PATH_MAX) {
+		if (n >= PATH_MAX) {
 			pr_err("sysfs path crossed PATH_MAX(%d) size\n", PATH_MAX);
 			continue;
 		}
Signature · 1 line
2.25.1
author maintainer
#10 lore raw

PATCH 10/166 tipc: fix shutdown() of connection oriented socket

In reply to Greg Kroah-Hartman

From: Tetsuo Handa <[email protected]>

[ Upstream commit a4b5cc9e10803ecba64a7d54c0f47e4564b4a980 ]

I confirmed that the problem fixed by commit 2a63866c8b51a3f7 ("tipc: fix shutdown() of connectionless socket") also applies to stream socket.

----------
#include <sys/socket.h>
#include <unistd.h>
#include <sys/wait.h>

int main(int argc, char *argv[])

{
        int fds[2] = { -1, -1 };
        socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds);
        if (fork() == 0)
                _exit(read(fds[0], NULL, 1));
        shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */
        wait(NULL); /* To be woken up by _exit(). */
        return 0;
}

----------

Since shutdown(SHUT_RDWR) should affect all processes sharing that socket, unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right behavior.

---
 net/tipc/socket.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
net/tipc/socket.c +1 -4
@@ -2126,10 +2126,7 @@ static int tipc_shutdown(struct socket *
 	lock_sock(sk);
 
 	__tipc_shutdown(sock, TIPC_CONN_SHUTDOWN);
-	if (tipc_sk_type_connectionless(sk))
-		sk->sk_shutdown = SHUTDOWN_MASK;
-	else
-		sk->sk_shutdown = SEND_SHUTDOWN;
+	sk->sk_shutdown = SHUTDOWN_MASK;
 
 	if (sk->sk_state == TIPC_DISCONNECTING) {
 		/* Discard any unreceived messages */
author maintainer
#1 lore raw

PATCH 1/166 af_key: pfkey_dump needs parameter validation

In reply to Greg Kroah-Hartman

From: Mark Salyzyn <[email protected]>

commit 37bd22420f856fcd976989f1d4f1f7ad28e1fcac upstream.

In pfkey_dump() dplen and splen can both be specified to access the xfrm_address_t structure out of bounds in__xfrm_state_filter_match() when it calls addr_match() with the indexes. Return EINVAL if either are out of range.

Cc Steffen Klassert <[email protected]>
Cc Herbert Xu <[email protected]>
Cc "David S. Miller" <[email protected]>
Cc Jakub Kicinski <[email protected]>
Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/key/af_key.c |    7 +++++++
 1 file changed, 7 insertions(+)
net/key/af_key.c +7 -0
@@ -1855,6 +1855,13 @@ static int pfkey_dump(struct sock *sk, s
 	if (ext_hdrs[SADB_X_EXT_FILTER - 1]) {
 		struct sadb_x_filter *xfilter = ext_hdrs[SADB_X_EXT_FILTER - 1];
 
+		if ((xfilter->sadb_x_filter_splen >=
+			(sizeof(xfrm_address_t) << 3)) ||
+		    (xfilter->sadb_x_filter_dplen >=
+			(sizeof(xfrm_address_t) << 3))) {
+			mutex_unlock(&pfk->dump_lock);
+			return -EINVAL;
+		}
 		filter = kmalloc(sizeof(*filter), GFP_KERNEL);
 		if (filter == NULL) {
 			mutex_unlock(&pfk->dump_lock);
author maintainer
#15 lore raw

PATCH 15/166 ipv4: Update exception handling for multipath routes via same device

In reply to Greg Kroah-Hartman

From: David Ahern <[email protected]>

[ Upstream commit 2fbc6e89b2f1403189e624cabaf73e189c5e50c6 ]

Kfir reported that pmtu exceptions are not created properly for deployments where multipath routes use the same device.

After some digging I see 2 compounding problems:
1. ip_route_output_key_hash_rcu is updating the flowi4_oif *after* the route lookup. This is the second use case where this has been a problem (the first is related to use of vti devices with VRF). I can not find any reason for the oif to be changed after the lookup; the code goes back to the start of git. It does not seem logical so remove it.

2. fib_lookups for exceptions do not call fib_select_path to handle multipath route selection based on the hash.

The end result is that the fib_lookup used to add the exception always creates it based using the first leg of the route.

An example topology showing the problem:

                 |  host1
             +------+
             | eth0 |  .209
             +------+
                 |
             +------+
     switch  | br0  |
             +------+
                 |
       +---------+---------+
       | host2             |  host3
   +------+             +------+
   | eth0 | .250        | eth0 | 192.168.252.252
   +------+             +------+
   +-----+             +-----+
   | vti | .2          | vti | 192.168.247.3
   +-----+             +-----+
       \                  /
 =================================
 tunnels
         192.168.247.1/24

for h in host1 host2 host3; do

        ip netns add ${h}
        ip -netns ${h} link set lo up
        ip netns exec ${h} sysctl -wq net.ipv4.ip_forward=1

done

ip netns add switch
ip -netns switch li set lo up
ip -netns switch link add br0 type bridge stp 0
ip -netns switch link set br0 up

for n in 1 2 3; do

        ip -netns switch link add eth-sw type veth peer name eth-h${n}
        ip -netns switch li set eth-h${n} master br0 up
        ip -netns switch li set eth-sw netns host${n} name eth0

done

ip -netns host1 addr add 192.168.252.209/24 dev eth0 ip -netns host1 link set dev eth0 up

ip -netns host1 route add 192.168.247.0/24 \
        nexthop via 192.168.252.250 dev eth0 nexthop via 192.168.252.252 dev eth0

ip -netns host2 addr add 192.168.252.250/24 dev eth0 ip -netns host2 link set dev eth0 up

ip -netns host2 addr add 192.168.252.252/24 dev eth0 ip -netns host3 link set dev eth0 up

ip netns add tunnel
ip -netns tunnel li set lo up
ip -netns tunnel li add br0 type bridge
ip -netns tunnel li set br0 up
for n in $(seq 11 20); do

        ip -netns tunnel addr add dev br0 192.168.247.${n}/24

done

for n in 2 3
do

        ip -netns tunnel link add vti${n} type veth peer name eth${n}
        ip -netns tunnel link set eth${n} mtu 1360 master br0 up
        ip -netns tunnel link set vti${n} netns host${n} mtu 1360 up
        ip -netns host${n} addr add dev vti${n} 192.168.247.${n}/24

done
ip -netns tunnel ro add default nexthop via 192.168.247.2 nexthop via 192.168.247.3

ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.11 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.15 ip -netns host1 ro ls cache

Before this patch the cache always shows exceptions against the first leg in the multipath route; 192.168.252.250 per this example. Since the hash has an initial random seed, you may need to vary the final octet more than what is listed. In my tests, using addresses between 11 and 19 usually found 1 that used both legs.

With this patch, the cache will have exceptions for both legs.

Fixes 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions")
---
 net/ipv4/route.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
net/ipv4/route.c +7 -4
@@ -794,6 +794,8 @@ static void __ip_do_redirect(struct rtab
 			if (fib_lookup(net, fl4, &res, 0) == 0) {
 				struct fib_nh *nh = &FIB_RES_NH(res);
 
+				fib_select_path(net, &res, fl4, skb);
+				nh = &FIB_RES_NH(res);
 				update_or_create_fnhe(nh, fl4->daddr, new_gw,
 						0, false,
 						jiffies + ip_rt_gc_timeout);
@@ -1010,6 +1012,7 @@ out:	kfree_skb(skb);
 static void __ip_rt_update_pmtu(struct rtable *rt, struct flowi4 *fl4, u32 mtu)
 {
 	struct dst_entry *dst = &rt->dst;
+	struct net *net = dev_net(dst->dev);
 	u32 old_mtu = ipv4_mtu(dst);
 	struct fib_result res;
 	bool lock = false;
@@ -1030,9 +1033,11 @@ static void __ip_rt_update_pmtu(struct r
 		return;
 
 	rcu_read_lock();
-	if (fib_lookup(dev_net(dst->dev), fl4, &res, 0) == 0) {
-		struct fib_nh *nh = &FIB_RES_NH(res);
+	if (fib_lookup(net, fl4, &res, 0) == 0) {
+		struct fib_nh *nh;
 
+		fib_select_path(net, &res, fl4, NULL);
+		nh = &FIB_RES_NH(res);
 		update_or_create_fnhe(nh, fl4->daddr, 0, mtu, lock,
 				      jiffies + ip_rt_mtu_expires);
 	}
@@ -2505,8 +2510,6 @@ struct rtable *ip_route_output_key_hash_
 	fib_select_path(net, res, fl4, skb);
 
 	dev_out = FIB_RES_DEV(*res);
-	fl4->flowi4_oif = dev_out->ifindex;
-
 
 make_route:
 	rth = __mkroute_output(res, fl4, orig_oif, dev_out, flags);
author maintainer
#14 lore raw

PATCH 14/166 net: add __must_check to skb_put_padto()

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 4a009cb04aeca0de60b73f37b102573354214b52 ]

skb_put_padto() and __skb_put_padto() callers must check return values or risk use-after-free.

---
 include/linux/skbuff.h |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
include/linux/skbuff.h +4 -3
@@ -2999,8 +2999,9 @@ static inline int skb_padto(struct sk_bu
  *	is untouched. Otherwise it is extended. Returns zero on
  *	success. The skb is freed on error if @free_on_error is true.
  */
-static inline int __skb_put_padto(struct sk_buff *skb, unsigned int len,
-				  bool free_on_error)
+static inline int __must_check __skb_put_padto(struct sk_buff *skb,
+					       unsigned int len,
+					       bool free_on_error)
 {
 	unsigned int size = skb->len;
 
@@ -3023,7 +3024,7 @@ static inline int __skb_put_padto(struct
  *	is untouched. Otherwise it is extended. Returns zero on
  *	success. The skb is freed on error.
  */
-static inline int skb_put_padto(struct sk_buff *skb, unsigned int len)
+static inline int __must_check skb_put_padto(struct sk_buff *skb, unsigned int len)
 {
 	return __skb_put_padto(skb, len, true);
 }
author maintainer
#13 lore raw

PATCH 13/166 net: phy: Avoid NPD upon phy_detach() when driver is unbound

In reply to Greg Kroah-Hartman

From: Florian Fainelli <[email protected]>

[ Upstream commit c2b727df7caa33876e7066bde090f40001b6d643 ]

If we have unbound the PHY driver prior to calling phy_detach() (often via phy_disconnect()) then we can cause a NULL pointer de-reference accessing the driver owner member. The steps to reproduce are:

echo unimac-mdio-0:01 > /sys/class/net/eth0/phydev/driver/unbind ip link set eth0 down

Fixes cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver")
---
 drivers/net/phy/phy_device.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/phy/phy_device.c +2 -1
@@ -1121,7 +1121,8 @@ void phy_detach(struct phy_device *phyde
 
 	phy_led_triggers_unregister(phydev);
 
-	module_put(phydev->mdio.dev.driver->owner);
+	if (phydev->mdio.dev.driver)
+		module_put(phydev->mdio.dev.driver->owner);
 
 	/* If the device had no specific driver before (i.e. - it
 	 * was using the generic driver), we unbind the device
author maintainer
#2 lore raw

PATCH 2/166 phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init

In reply to Greg Kroah-Hartman

From: Sivaprakash Murugesan <[email protected]>

[ Upstream commit afd55e6d1bd35b4b36847869011447a83a81c8e0 ]

There were some problem in ipq8074 Gen2 PCIe phy init sequence.

1. Few register values were wrongly updated in the phy init sequence.
2. The register QSERDES_RX_SIGDET_CNTRL is a RX tuning parameter register which is added in serdes table causing the wrong register was getting updated.
3. Clocks and resets were not added in the phy init.

Fix these to make Gen2 PCIe port on ipq8074 devices to work.

---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)
drivers/phy/qualcomm/phy-qcom-qmp.c +11 -7
index 2526971f99299..3eeaf57e6d939 100644
@@ -102,6 +102,8 @@
 #define QSERDES_COM_CORECLK_DIV_MODE1			0x1bc
 
 /* QMP PHY TX registers */
+#define QSERDES_TX_EMP_POST1_LVL			0x018
+#define QSERDES_TX_SLEW_CNTL				0x040
 #define QSERDES_TX_RES_CODE_LANE_OFFSET			0x054
 #define QSERDES_TX_DEBUG_BUS_SEL			0x064
 #define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN	0x068
@@ -394,8 +396,8 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
 	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
 	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
-	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0x1f),
-	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
 	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
 	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
 	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
@@ -421,7 +423,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
 	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
 	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
-	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0xa),
 	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
 	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
 	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
@@ -430,7 +431,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
 	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
 	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
-	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x7),
 };
 
 static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
@@ -438,6 +438,8 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
 	QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
 	QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a),
 };
 
 static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
@@ -448,7 +450,6 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
 	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
 	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
-	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x4),
 };
 
 static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
@@ -665,6 +666,9 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
 	.mask_pcs_ready		= PHYSTATUS,
 };
 
+static const char * const ipq8074_pciephy_clk_l[] = {
+	"aux", "cfg_ahb",
+};
 /* list of resets */
 static const char * const ipq8074_pciephy_reset_l[] = {
 	"phy", "common",
@@ -682,8 +686,8 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
 	.rx_tbl_num		= ARRAY_SIZE(ipq8074_pcie_rx_tbl),
 	.pcs_tbl		= ipq8074_pcie_pcs_tbl,
 	.pcs_tbl_num		= ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
-	.clk_list		= NULL,
-	.num_clks		= 0,
+	.clk_list		= ipq8074_pciephy_clk_l,
+	.num_clks		= ARRAY_SIZE(ipq8074_pciephy_clk_l),
 	.reset_list		= ipq8074_pciephy_reset_l,
 	.num_resets		= ARRAY_SIZE(ipq8074_pciephy_reset_l),
 	.vreg_list		= NULL,
Signature · 1 line
2.25.1
author maintainer
#19 lore raw

PATCH 19/166 scsi: aacraid: fix illegal IO beyond last LBA

In reply to Greg Kroah-Hartman

From: Balsundar P <[email protected]>

[ Upstream commit c86fbe484c10b2cd1e770770db2d6b2c88801c1d ]

The driver fails to handle data when read or written beyond device reported LBA, which triggers kernel panic

---
 drivers/scsi/aacraid/aachba.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/scsi/aacraid/aachba.c +4 -4
index 7173ae53c5260..ba11313568810 100644
@@ -2322,13 +2322,13 @@ static int aac_read(struct scsi_cmnd * scsicmd)
 		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
 			SAM_STAT_CHECK_CONDITION;
 		set_sense(&dev->fsa_dev[cid].sense_data,
-			  HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
+			  ILLEGAL_REQUEST, SENCODE_LBA_OUT_OF_RANGE,
 			  ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
 		memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
 		       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
 			     SCSI_SENSE_BUFFERSIZE));
 		scsicmd->scsi_done(scsicmd);
-		return 1;
+		return 0;
 	}
 
 	dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %llu, t = %ld.\n",
@@ -2414,13 +2414,13 @@ static int aac_write(struct scsi_cmnd * scsicmd)
 		scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 |
 			SAM_STAT_CHECK_CONDITION;
 		set_sense(&dev->fsa_dev[cid].sense_data,
-			  HARDWARE_ERROR, SENCODE_INTERNAL_TARGET_FAILURE,
+			  ILLEGAL_REQUEST, SENCODE_LBA_OUT_OF_RANGE,
 			  ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0);
 		memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data,
 		       min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data),
 			     SCSI_SENSE_BUFFERSIZE));
 		scsicmd->scsi_done(scsicmd);
-		return 1;
+		return 0;
 	}
 
 	dprintk((KERN_DEBUG "aac_write[cpu %d]: lba = %llu, t = %ld.\n",
Signature · 1 line
2.25.1
author maintainer
#18 lore raw

PATCH 18/166 mm: fix double page fault on arm64 if PTE_AF is cleared

In reply to Greg Kroah-Hartman

From: Jia He <[email protected]>

[ Upstream commit 83d116c53058d505ddef051e90ab27f57015b025 ]

When we tested pmdk unit test [1] vmmalloc_fork TEST3 on arm64 guest, there will be a double page fault in __copy_from_user_inatomic of cow_user_page.

To reproduce the bug, the cmd is as follows after you deployed everything:
make -C src/test/vmmalloc_fork/ TEST_TIME=60m check

Below call trace is from arm64 do_page_fault for debugging purpose:

[  110.016195] Call trace:
[  110.016826]  do_page_fault+0x5a4/0x690
[  110.017812]  do_mem_abort+0x50/0xb0
[  110.018726]  el1_da+0x20/0xc4
[  110.019492]  __arch_copy_from_user+0x180/0x280
[  110.020646]  do_wp_page+0xb0/0x860
[  110.021517]  __handle_mm_fault+0x994/0x1338
[  110.022606]  handle_mm_fault+0xe8/0x180
[  110.023584]  do_page_fault+0x240/0x690
[  110.024535]  do_mem_abort+0x50/0xb0
[  110.025423]  el0_da+0x20/0x24

The pte info before __copy_from_user_inatomic is (PTE_AF is cleared):
[ffff9b007000] pgd=000000023d4f8003, pud=000000023da9b003,

               pmd=000000023d4b3003, pte=360000298607bd3

As told by Catalin: "On arm64 without hardware Access Flag, copying from user will fail because the pte is old and cannot be marked young. So we always end up with zeroed page after fork() + CoW for pfn mappings. we don't always have a hardware-managed access flag on arm64."

This patch fixes it by calling pte_mkyoung. Also, the parameter is changed because vmf should be passed to cow_user_page()

Add a WARN_ON_ONCE when __copy_from_user_inatomic() returns error in case there can be some obscure use-case (by Kirill).

[1] https://github.com/pmem/pmdk/tree/master/src/test/vmmalloc_fork

---
 mm/memory.c | 104 ++++++++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 89 insertions(+), 15 deletions(-)
mm/memory.c +89 -15
index e9bce27bc18c3..07188929a30a1 100644
@@ -117,6 +117,18 @@ int randomize_va_space __read_mostly =
 					2;
 #endif
 
+#ifndef arch_faults_on_old_pte
+static inline bool arch_faults_on_old_pte(void)
+{
+	/*
+	 * Those arches which don't have hw access flag feature need to
+	 * implement their own helper. By default, "true" means pagefault
+	 * will be hit on old pte.
+	 */
+	return true;
+}
+#endif
+
 static int __init disable_randmaps(char *s)
 {
 	randomize_va_space = 0;
@@ -2324,32 +2336,82 @@ static inline int pte_unmap_same(struct mm_struct *mm, pmd_t *pmd,
 	return same;
 }
 
-static inline void cow_user_page(struct page *dst, struct page *src, unsigned long va, struct vm_area_struct *vma)
+static inline bool cow_user_page(struct page *dst, struct page *src,
+				 struct vm_fault *vmf)
 {
+	bool ret;
+	void *kaddr;
+	void __user *uaddr;
+	bool force_mkyoung;
+	struct vm_area_struct *vma = vmf->vma;
+	struct mm_struct *mm = vma->vm_mm;
+	unsigned long addr = vmf->address;
+
 	debug_dma_assert_idle(src);
 
+	if (likely(src)) {
+		copy_user_highpage(dst, src, addr, vma);
+		return true;
+	}
+
 	/*
 	 * If the source page was a PFN mapping, we don't have
 	 * a "struct page" for it. We do a best-effort copy by
 	 * just copying from the original user address. If that
 	 * fails, we just zero-fill it. Live with it.
 	 */
-	if (unlikely(!src)) {
-		void *kaddr = kmap_atomic(dst);
-		void __user *uaddr = (void __user *)(va & PAGE_MASK);
+	kaddr = kmap_atomic(dst);
+	uaddr = (void __user *)(addr & PAGE_MASK);
+
+	/*
+	 * On architectures with software "accessed" bits, we would
+	 * take a double page fault, so mark it accessed here.
+	 */
+	force_mkyoung = arch_faults_on_old_pte() && !pte_young(vmf->orig_pte);
+	if (force_mkyoung) {
+		pte_t entry;
+
+		vmf->pte = pte_offset_map_lock(mm, vmf->pmd, addr, &vmf->ptl);
+		if (!likely(pte_same(*vmf->pte, vmf->orig_pte))) {
+			/*
+			 * Other thread has already handled the fault
+			 * and we don't need to do anything. If it's
+			 * not the case, the fault will be triggered
+			 * again on the same address.
+			 */
+			ret = false;
+			goto pte_unlock;
+		}
 
+		entry = pte_mkyoung(vmf->orig_pte);
+		if (ptep_set_access_flags(vma, addr, vmf->pte, entry, 0))
+			update_mmu_cache(vma, addr, vmf->pte);
+	}
+
+	/*
+	 * This really shouldn't fail, because the page is there
+	 * in the page tables. But it might just be unreadable,
+	 * in which case we just give up and fill the result with
+	 * zeroes.
+	 */
+	if (__copy_from_user_inatomic(kaddr, uaddr, PAGE_SIZE)) {
 		/*
-		 * This really shouldn't fail, because the page is there
-		 * in the page tables. But it might just be unreadable,
-		 * in which case we just give up and fill the result with
-		 * zeroes.
+		 * Give a warn in case there can be some obscure
+		 * use-case
 		 */
-		if (__copy_from_user_inatomic(kaddr, uaddr, PAGE_SIZE))
-			clear_page(kaddr);
-		kunmap_atomic(kaddr);
-		flush_dcache_page(dst);
-	} else
-		copy_user_highpage(dst, src, va, vma);
+		WARN_ON_ONCE(1);
+		clear_page(kaddr);
+	}
+
+	ret = true;
+
+pte_unlock:
+	if (force_mkyoung)
+		pte_unmap_unlock(vmf->pte, vmf->ptl);
+	kunmap_atomic(kaddr);
+	flush_dcache_page(dst);
+
+	return ret;
 }
 
 static gfp_t __get_fault_gfp_mask(struct vm_area_struct *vma)
@@ -2503,7 +2565,19 @@ static int wp_page_copy(struct vm_fault *vmf)
 				vmf->address);
 		if (!new_page)
 			goto oom;
-		cow_user_page(new_page, old_page, vmf->address, vma);
+
+		if (!cow_user_page(new_page, old_page, vmf)) {
+			/*
+			 * COW failed, if the fault was solved by other,
+			 * it's fine. If not, userspace would re-fault on
+			 * the same address and we will handle the fault
+			 * from the second attempt.
+			 */
+			put_page(new_page);
+			if (old_page)
+				put_page(old_page);
+			return 0;
+		}
 	}
 
 	if (mem_cgroup_try_charge(new_page, mm, GFP_KERNEL, &memcg, false))
Signature · 1 line
2.25.1
author maintainer
#16 lore raw

PATCH 16/166 geneve: add transport ports in route lookup for geneve

In reply to Greg Kroah-Hartman

From: Mark Gray <[email protected]>

[ Upstream commit 34beb21594519ce64a55a498c2fe7d567bc1ca20 ]

This patch adds transport ports information for route lookup so that IPsec can select Geneve tunnel traffic to do encryption. This is needed for OVS/OVN IPsec with encrypted Geneve tunnels.

This can be tested by configuring a host-host VPN using an IKE daemon and specifying port numbers. For example, for an Openswan-type configuration, the following parameters should be configured on both hosts and IPsec set up as-per normal:

$ cat /etc/ipsec.conf

conn in
...
left=$IP1
right=$IP2
...
leftprotoport=udp/6081
rightprotoport=udp
...
conn out
...
left=$IP1
right=$IP2
...
leftprotoport=udp
rightprotoport=udp/6081
...

The tunnel can then be setup using "ip" on both hosts (but changing the relevant IP addresses):

$ ip link add tun type geneve id 1000 remote $IP2
$ ip addr add 192.168.0.1/24 dev tun
$ ip link set tun up

This can then be tested by pinging from $IP1:

$ ping 192.168.0.2

Without this patch the traffic is unencrypted on the wire.

Fixes 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels")
---
 drivers/net/geneve.c |   37 +++++++++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 10 deletions(-)
drivers/net/geneve.c +27 -10
@@ -716,7 +716,8 @@ static struct rtable *geneve_get_v4_rt(s
 				       struct net_device *dev,
 				       struct geneve_sock *gs4,
 				       struct flowi4 *fl4,
-				       const struct ip_tunnel_info *info)
+				       const struct ip_tunnel_info *info,
+				       __be16 dport, __be16 sport)
 {
 	bool use_cache = ip_tunnel_dst_cache_usable(skb, info);
 	struct geneve_dev *geneve = netdev_priv(dev);
@@ -732,6 +733,8 @@ static struct rtable *geneve_get_v4_rt(s
 	fl4->flowi4_proto = IPPROTO_UDP;
 	fl4->daddr = info->key.u.ipv4.dst;
 	fl4->saddr = info->key.u.ipv4.src;
+	fl4->fl4_dport = dport;
+	fl4->fl4_sport = sport;
 
 	tos = info->key.tos;
 	if ((tos == 1) && !geneve->collect_md) {
@@ -766,7 +769,8 @@ static struct dst_entry *geneve_get_v6_d
 					   struct net_device *dev,
 					   struct geneve_sock *gs6,
 					   struct flowi6 *fl6,
-					   const struct ip_tunnel_info *info)
+					   const struct ip_tunnel_info *info,
+					   __be16 dport, __be16 sport)
 {
 	bool use_cache = ip_tunnel_dst_cache_usable(skb, info);
 	struct geneve_dev *geneve = netdev_priv(dev);
@@ -782,6 +786,9 @@ static struct dst_entry *geneve_get_v6_d
 	fl6->flowi6_proto = IPPROTO_UDP;
 	fl6->daddr = info->key.u.ipv6.dst;
 	fl6->saddr = info->key.u.ipv6.src;
+	fl6->fl6_dport = dport;
+	fl6->fl6_sport = sport;
+
 	prio = info->key.tos;
 	if ((prio == 1) && !geneve->collect_md) {
 		prio = ip_tunnel_get_dsfield(ip_hdr(skb), skb);
@@ -828,7 +835,9 @@ static int geneve_xmit_skb(struct sk_buf
 	__be16 df;
 	int err;
 
-	rt = geneve_get_v4_rt(skb, dev, gs4, &fl4, info);
+	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
+	rt = geneve_get_v4_rt(skb, dev, gs4, &fl4, info,
+			      geneve->info.key.tp_dst, sport);
 	if (IS_ERR(rt))
 		return PTR_ERR(rt);
 
@@ -839,7 +848,6 @@ static int geneve_xmit_skb(struct sk_buf
 		skb_dst_update_pmtu(skb, mtu);
 	}
 
-	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
 	if (geneve->collect_md) {
 		tos = ip_tunnel_ecn_encap(key->tos, ip_hdr(skb), skb);
 		ttl = key->ttl;
@@ -874,7 +882,9 @@ static int geneve6_xmit_skb(struct sk_bu
 	__be16 sport;
 	int err;
 
-	dst = geneve_get_v6_dst(skb, dev, gs6, &fl6, info);
+	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
+	dst = geneve_get_v6_dst(skb, dev, gs6, &fl6, info,
+				geneve->info.key.tp_dst, sport);
 	if (IS_ERR(dst))
 		return PTR_ERR(dst);
 
@@ -885,7 +895,6 @@ static int geneve6_xmit_skb(struct sk_bu
 		skb_dst_update_pmtu(skb, mtu);
 	}
 
-	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
 	if (geneve->collect_md) {
 		prio = ip_tunnel_ecn_encap(key->tos, ip_hdr(skb), skb);
 		ttl = key->ttl;
@@ -963,13 +972,18 @@ static int geneve_fill_metadata_dst(stru
 {
 	struct ip_tunnel_info *info = skb_tunnel_info(skb);
 	struct geneve_dev *geneve = netdev_priv(dev);
+	__be16 sport;
 
 	if (ip_tunnel_info_af(info) == AF_INET) {
 		struct rtable *rt;
 		struct flowi4 fl4;
+
 		struct geneve_sock *gs4 = rcu_dereference(geneve->sock4);
+		sport = udp_flow_src_port(geneve->net, skb,
+					  1, USHRT_MAX, true);
 
-		rt = geneve_get_v4_rt(skb, dev, gs4, &fl4, info);
+		rt = geneve_get_v4_rt(skb, dev, gs4, &fl4, info,
+				      geneve->info.key.tp_dst, sport);
 		if (IS_ERR(rt))
 			return PTR_ERR(rt);
 
@@ -979,9 +993,13 @@ static int geneve_fill_metadata_dst(stru
 	} else if (ip_tunnel_info_af(info) == AF_INET6) {
 		struct dst_entry *dst;
 		struct flowi6 fl6;
+
 		struct geneve_sock *gs6 = rcu_dereference(geneve->sock6);
+		sport = udp_flow_src_port(geneve->net, skb,
+					  1, USHRT_MAX, true);
 
-		dst = geneve_get_v6_dst(skb, dev, gs6, &fl6, info);
+		dst = geneve_get_v6_dst(skb, dev, gs6, &fl6, info,
+					geneve->info.key.tp_dst, sport);
 		if (IS_ERR(dst))
 			return PTR_ERR(dst);
 
@@ -992,8 +1010,7 @@ static int geneve_fill_metadata_dst(stru
 		return -EINVAL;
 	}
 
-	info->key.tp_src = udp_flow_src_port(geneve->net, skb,
-					     1, USHRT_MAX, true);
+	info->key.tp_src = sport;
 	info->key.tp_dst = geneve->info.key.tp_dst;
 	return 0;
 }
author maintainer
#17 lore raw

PATCH 17/166 serial: 8250: Avoid error message on reprobe

In reply to Greg Kroah-Hartman

From: Lukas Wunner <[email protected]>

commit e0a851fe6b9b619527bd928aa93caaddd003f70c upstream.

If the call to uart_add_one_port() in serial8250_register_8250_port() fails, a half-initialized entry in the serial_8250ports[] array is left behind.

A subsequent reprobe of the same serial port causes that entry to be reused. Because uart->port.dev is set, uart_remove_one_port() is called for the half-initialized entry and bails out with an error message:

bcm2835-aux-uart 3f215040.serial: Removing wrong port: (null) != (ptrval)

The same happens on failure of mctrl_gpio_init() since commit 4a96895f74c9 ("tty/serial/8250: use mctrl_gpio helpers").

Fix by zeroing the uart->port.dev pointer in the probe error path.

The bug was introduced in v2.6.10 by historical commit befff6f5bf5f ("[SERIAL] Add new port registration/unregistration functions."):
https://git.kernel.org/tglx/history/c/befff6f5bf5f

The commit added an unconditional call to uart_remove_one_port() in serial8250_register_port(). In v3.7, commit 835d844d1a28 ("8250_pnp:
do pnp probe before legacy probe") made that call conditional on uart->port.dev which allows me to fix the issue by zeroing that pointer in the error path. Thus, the present commit will fix the problem as far back as v3.7 whereas still older versions need to also cherry-pick 835d844d1a28.

Fixes 835d844d1a28 ("8250_pnp: do pnp probe before legacy probe")
Cc [email protected] # v2.6.10
Cc [email protected] # v2.6.10: 835d844d1a28: 8250_pnp: do pnp probe before legacy
[iwamatsu: Backported to 4.14, 4.19: adjust context]
---
 drivers/tty/serial/8250/8250_core.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/tty/serial/8250/8250_core.c +9 -2
@@ -1065,8 +1065,10 @@ int serial8250_register_8250_port(struct
 			serial8250_apply_quirks(uart);
 			ret = uart_add_one_port(&serial8250_reg,
 						&uart->port);
-			if (ret == 0)
-				ret = uart->port.line;
+			if (ret)
+				goto err;
+
+			ret = uart->port.line;
 		} else {
 			dev_info(uart->port.dev,
 				"skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
@@ -1091,6 +1093,11 @@ int serial8250_register_8250_port(struct
 	mutex_unlock(&serial_mutex);
 
 	return ret;
+
+err:
+	uart->port.dev = NULL;
+	mutex_unlock(&serial_mutex);
+	return ret;
 }
 EXPORT_SYMBOL(serial8250_register_8250_port);
 
author maintainer
#30 lore raw

PATCH 30/166 clk/ti/adpll: allocate room for terminating null

In reply to Greg Kroah-Hartman

From: Stephen Kitt <[email protected]>

[ Upstream commit 7f6ac72946b88b89ee44c1c527aa8591ac5ffcbe ]

The buffer allocated in ti_adpll_clk_get_name doesn't account for the terminating null. This patch switches to devm_kasprintf to avoid overflowing.

---
 drivers/clk/ti/adpll.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)
drivers/clk/ti/adpll.c +2 -9
index d6036c788fab8..2738ecb1511b1 100644
@@ -193,15 +193,8 @@ static const char *ti_adpll_clk_get_name(struct ti_adpll_data *d,
 		if (err)
 			return NULL;
 	} else {
-		const char *base_name = "adpll";
-		char *buf;
-
-		buf = devm_kzalloc(d->dev, 8 + 1 + strlen(base_name) + 1 +
-				    strlen(postfix), GFP_KERNEL);
-		if (!buf)
-			return NULL;
-		sprintf(buf, "%08lx.%s.%s", d->pa, base_name, postfix);
-		name = buf;
+		name = devm_kasprintf(d->dev, GFP_KERNEL, "%08lx.adpll.%s",
+				      d->pa, postfix);
 	}
 
 	return name;
Signature · 1 line
2.25.1
author maintainer
#31 lore raw

PATCH 31/166 mtd: cfi_cmdset_0002: dont free cfi->cfiq in error path of cfi_amdstd_setup()

In reply to Greg Kroah-Hartman

From: Hou Tao <[email protected]>

[ Upstream commit 03976af89e3bd9489d542582a325892e6a8cacc0 ]

Else there may be a double-free problem, because cfi->cfiq will be freed by mtd_do_chip_probe() if both the two invocations of check_cmd_set() return failure.

---
 drivers/mtd/chips/cfi_cmdset_0002.c | 1 -
 1 file changed, 1 deletion(-)
drivers/mtd/chips/cfi_cmdset_0002.c +0 -1
index 1f0d83086cb09..870d1f1331b18 100644
@@ -726,7 +726,6 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
 	kfree(mtd->eraseregions);
 	kfree(mtd);
 	kfree(cfi->cmdset_priv);
-	kfree(cfi->cfiq);
 	return NULL;
 }
 
Signature · 1 line
2.25.1

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.14.200-rc1 review

This is the start of the stable review cycle for the 4.14.200 release. There are 166 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 01 Oct 2020 10:59:03 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.200-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.14.200-rc1

Jiri Slaby <[email protected]>
ata: sata_mv, avoid trigerrable BUG_ON

Jiri Slaby <[email protected]>
ata: make qc_prep return ata_completion_errors

Jiri Slaby <[email protected]>
ata: define AC_ERR_OK

Nick Desaulniers <[email protected]>
lib/string.c: implement stpcpy

Gao Xiang <[email protected]>
mm, THP, swap: fix allocating cluster for swapfile by mistake

Masami Hiramatsu <[email protected]>
kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()

Jan Höppner <[email protected]>
s390/dasd: Fix zero write for FBA devices

Wei Li <[email protected]>

    MIPS: Add the missing 'CPU_1074K' into __get_cpu_type()

Tom Rix <[email protected]>
ALSA: asihpi: fix iounmap in error handler

Linus Lüssing <[email protected]>
batman-adv: mcast: fix duplicate mcast packets in BLA backbone from mesh

Sven Eckelmann <[email protected]>
batman-adv: Add missing include for in_interrupt()

Dmitry Bogdanov <[email protected]>
net: qed: RDMA personality shouldn't fail VF load

Marek Szyprowski <[email protected]>
drm/vc4/vc4_hdmi: fill ASoC card owner

Eric Dumazet <[email protected]>

    mac802154: tx: fix use-after-free

Linus Lüssing <[email protected]>
batman-adv: mcast/TT: fix wrongly dropped or rerouted packets

Jing Xiangfeng <[email protected]>
atm: eni: fix the missed pci_disable_device() for eni_init_one()

Linus Lüssing <[email protected]>
batman-adv: bla: fix type misuse for backbone_gw hash indexing

Maximilian Luz <[email protected]>
mwifiex: Increase AES key storage size to 256 bits

Tianjia Zhang <[email protected]>
clocksource/drivers/h8300_timer8: Fix wrong return value in h8300_8timer_init()

Tom Rix <[email protected]>

    ieee802154/adf7242: check status of adf7242_read_reg

Liu Jian <[email protected]>
ieee802154: fix one possible memleak in ca8210_dev_com_init

Josh Poimboeuf <[email protected]>
objtool: Fix noreturn detection for ignored functions

Hans de Goede <[email protected]>
i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()

Ilya Leoshkevich <[email protected]>
s390/init: add missing __init annotations

Qu Wenruo <[email protected]>
btrfs: qgroup: fix data leak caused by race between writeback and truncate

Zeng Tao <[email protected]>
vfio/pci: fix racy on error and request eventfd ctx

Andy Lutomirski <[email protected]>
selftests/x86/syscall_nt: Clear weird flags after each test

Javed Hasan <[email protected]>
scsi: libfc: Skip additional kref updating work event

Javed Hasan <[email protected]>
scsi: libfc: Handling of extra kref

Zhang Xiaoxu <[email protected]>
cifs: Fix double add page to memcg when cifs_readpages

Alex Williamson <[email protected]>
vfio/pci: Clear error and request eventfd ctx after releasing

Thomas Gleixner <[email protected]>
x86/speculation/mds: Mark mds_user_clear_cpu_buffers() __always_inline

Boris Brezillon <[email protected]>
mtd: parser: cmdline: Support MTD names containing one or more colons

Madhuparna Bhowmik <[email protected]>
rapidio: avoid data race between file operation callbacks and mport_cdev_add().

Qian Cai <[email protected]>
mm/swap_state: fix a data race in swapin_nr_pages

Jeff Layton <[email protected]>
ceph: fix potential race in ceph_check_caps

Dinghao Liu <[email protected]>
mtd: rawnand: omap_elm: Fix runtime PM imbalance on error

Adrian Hunter <[email protected]>
perf kcore_copy: Fix module map when there are no modules loaded

Xie XiuQi <[email protected]>
perf util: Fix memory leak of prefix_if_not_in

Qian Cai <[email protected]>
vfio/pci: fix memory leaks of eventfd ctx

David Sterba <[email protected]>
btrfs: don't force read-only after error in drop snapshot

Yu Chen <[email protected]>
usb: dwc3: Increase timeout for CmdAct cleared by device controller

Shreyas Joshi <[email protected]>
printk: handle blank console arguments passed in.

Dinghao Liu <[email protected]>
drm/nouveau/debugfs: fix runtime pm imbalance on error

Alexander Duyck <[email protected]>
e1000: Do not perform reset in reset_task if we are already down

Anshuman Khandual <[email protected]>
arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register

Colin Ian King <[email protected]>
USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned int

Miklos Szeredi <[email protected]>
fuse: don't check refcount after stealing page

Nicholas Piggin <[email protected]>
powerpc/traps: Make unrecoverable NMIs die instead of panic

Takashi Iwai <[email protected]>
ALSA: hda: Fix potential race in unsol event handler

Jonathan Bakker <[email protected]>
tty: serial: samsung: Correct clock selection logic

Tang Bin <[email protected]>
USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()

Sonny Sasaka <[email protected]>
Bluetooth: Handle Inquiry Cancel error after Inquiry Complete

Jonathan Bakker <[email protected]>
phy: samsung: s5pv210-usb2: Add delay after reset

Jonathan Bakker <[email protected]>
power: supply: max17040: Correct voltage reading

Cong Wang <[email protected]>

    atm: fix a memory leak of vcc->user_back

Krzysztof Kozlowski <[email protected]>
dt-bindings: sound: wm8994: Correct required supplies based on actual implementaion

Will Deacon <[email protected]>
arm64: cpufeature: Relax checks for AArch32 support at EL[0-2]

Wei Yongjun <[email protected]>
sparc64: vcc: Fix error return code in vcc_probe()

Ivan Safonov <[email protected]>
staging:r8188eu: avoid skb_clone for amsdu to msdu conversion

Madhuparna Bhowmik <[email protected]>
drivers: char: tlclk.c: Avoid data race between init and interrupt handler

Douglas Anderson <[email protected]>
bdev: Reduce time holding bd_mutex in sync in blkdev_close()

Steve Rutherford <[email protected]>
KVM: Remove CREATE_IRQCHIP/SET_PIT2 race

Raviteja Narayanam <[email protected]>
serial: uartps: Wait for tx_empty in console setup

Nilesh Javali <[email protected]>
scsi: qedi: Fix termination timeouts in session logout

Jaewon Kim <[email protected]>
mm/mmap.c: initialize align_offset explicitly for vm_unmapped_area

Qian Cai <[email protected]>
mm/vmscan.c: fix data races using kswapd_classzone_idx

Xianting Tian <[email protected]>
mm/filemap.c: clear page error before actual read

Nathan Chancellor <[email protected]>
mm/kmemleak.c: use address-of operator on section symbols

Trond Myklebust <[email protected]>
NFS: Fix races nfs_page_group_destroy() vs nfs_destroy_unlinked_subrequests()

Andreas Steinmetz <[email protected]>
ALSA: usb-audio: Fix case when USB MIDI interface has more than one extra endpoint descriptor

Liu Song <[email protected]>
ubifs: Fix out-of-bounds memory access caused by abnormal value of node_len

Chuck Lever <[email protected]>
svcrdma: Fix leak of transport addresses

Christophe JAILLET <[email protected]>
SUNRPC: Fix a potential buffer overflow in 'svc_print_xprts()'

Zhu Yanjun <[email protected]>
RDMA/rxe: Set sys_image_guid to be aligned with HW IB devices

Gabriel Ravier <[email protected]>
tools: gpio-hammer: Avoid potential overflow in main

Pratik Rajesh Sampat <[email protected]>
cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_work_fn

Christophe JAILLET <[email protected]>
perf cpumap: Fix snprintf overflow check

Vignesh Raghavendra <[email protected]>
serial: 8250: 8250_omap: Terminate DMA before pushing data on RX timeout

Peter Ujfalusi <[email protected]>
serial: 8250_omap: Fix sleeping function called from invalid context during probe

Vignesh Raghavendra <[email protected]>
serial: 8250_port: Don't service RX FIFO if throttled

Nathan Chancellor <[email protected]>
tracing: Use address-of operator on section symbols

Alexandre Belloni <[email protected]>
rtc: ds1374: fix possible race condition

Stefan Berger <[email protected]>
tpm: ibmvtpm: Wait for buffer to be set before proceeding

Darrick J. Wong <[email protected]>
xfs: don't ever return a stale pointer from __xfs_dir3_free_read

Colin Ian King <[email protected]>
media: tda10071: fix unsigned sign extension overflow

Howard Chung <[email protected]>
Bluetooth: L2CAP: handle l2cap config request during open state

Sagar Biradar <[email protected]>
scsi: aacraid: Disabling TM path and only processing IOP reset

Wen Gong <[email protected]>
ath10k: use kzalloc to read for ath10k_sdio_hif_diag_read

John Clements <[email protected]>
drm/amdgpu: increase atombios cmd timeout

Kirill A. Shutemov <[email protected]>
mm: avoid data corruption on CoW fault into PFN-mapped VMA

Qiujun Huang <[email protected]>

    ext4: fix a data race at inode->i_disksize

Wen Yang <[email protected]>
timekeeping: Prevent 32bit truncation in scale64_check_overflow()

Alain Michaud <[email protected]>
Bluetooth: guard against controllers sending zero'd events

Takashi Iwai <[email protected]>
media: go7007: Fix URB type for interrupt handling

Dmitry Osipenko <[email protected]>
dmaengine: tegra-apb: Prevent race conditions on channel's freeing

Thomas Gleixner <[email protected]>
bpf: Remove recursion prevention from rcu free callback

Dave Hansen <[email protected]>
x86/pkeys: Add check for pkey "overflow"

Dan Carpenter <[email protected]>
media: staging/imx: Missing assignment in imx_media_capture_device_register()

Paolo Bonzini <[email protected]>
KVM: x86: fix incorrect comparison in trace event

Bart Van Assche <[email protected]>
RDMA/rxe: Fix configuration of atomic queue pair attributes

Thomas Richter <[email protected]>
perf test: Fix test trace+probe_vfs_getname.sh on s390

Wen Yang <[email protected]>
drm/omap: fix possible object reference leak

James Smart <[email protected]>
scsi: lpfc: Fix coverity errors in fmdi attribute handling

James Smart <[email protected]>
scsi: lpfc: Fix RQ buffer leakage when no IOCBs available

Vasily Averin <[email protected]>
selinux: sel_avc_get_stat_idx should increase position index

Steve Grubb <[email protected]>
audit: CONFIG_CHANGE don't log internal bookkeeping as an event

Qian Cai <[email protected]>
skbuff: fix a data race in skb_queue_len()

Mohan Kumar <[email protected]>
ALSA: hda: Clear RIRB status before reading WP

Zhuang Yanying <[email protected]>
KVM: fix overflow of zero page refcount with ksm running

Hillf Danton <[email protected]>
Bluetooth: prefetch channel before killing sock

Steven Price <[email protected]>
mm: pagewalk: fix termination condition in walk_pte_range()

Manish Mandlik <[email protected]>
Bluetooth: Fix refcount use-after-free issue

Doug Smythies <[email protected]>
tools/power/x86/intel_pstate_tracer: changes for python 3 compatibility

Sven Schnelle <[email protected]>
selftests/ftrace: fix glob selftest

Mert Dirik <[email protected]>
ar5523: Add USB ID of SMCWUSBT-G2 wireless adapter

Josef Bacik <[email protected]>
tracing: Set kernel_stack's caller size properly

Oliver O'Halloran <[email protected]>
powerpc/eeh: Only dump stack once if an MMIO loop is detected

Matthias Fend <[email protected]>
dmaengine: zynqmp_dma: fix burst length configuration

Rafael J. Wysocki <[email protected]>
ACPI: EC: Reference count query handlers under lock

Nikhil Devshatwar <[email protected]>
media: ti-vpe: cal: Restrict DMA to avoid memory corruption

Marco Elver <[email protected]>
seqlock: Require WRITE_ONCE surrounding raw_seqcount_barrier

Vasily Averin <[email protected]>
rt_cpu_seq_next should increase position index

Vasily Averin <[email protected]>
neigh_stat_seq_next() should increase position index

Joe Perches <[email protected]>
kernel/sys.c: avoid copying possible padding bytes in copy_to_user

Pavel Shilovsky <[email protected]>
CIFS: Properly process SMB3 lease breaks

Kusanagi Kouichi <[email protected]>
debugfs: Fix !DEBUG_FS debugfs_create_automount

Bob Peterson <[email protected]>
gfs2: clean up iopen glock mess in gfs2_create_inode

Bradley Bolen <[email protected]>
mmc: core: Fix size overflow for mmc partitions

Christophe JAILLET <[email protected]>
RDMA/iw_cgxb4: Fix an error handling path in 'c4iw_connect()'

Brian Foster <[email protected]>
xfs: fix attr leaf header freemap.size underflow

Pan Bian <[email protected]>
RDMA/i40iw: Fix potential use after free

Guoju Fang <[email protected]>
bcache: fix a lost wake-up problem caused by mca_cannibalize_lock

Divya Indi <[email protected]>
tracing: Adding NULL checks for trace_array descriptor pointer

Lee Jones <[email protected]>
mfd: mfd-core: Protect against NULL call-back function pointer

Hou Tao <[email protected]>

    mtd: cfi_cmdset_0002: don't free cfi->cfiq in error path of cfi_amdstd_setup()

Stephen Kitt <[email protected]>
clk/ti/adpll: allocate room for terminating null

Pan Bian <[email protected]>
scsi: fnic: fix use after free

Dmitry Osipenko <[email protected]>
PM / devfreq: tegra30: Fix integer overflow on CPU's freq max out

Hui Wang <[email protected]>
ALSA: hda/realtek - Couldn't detect Mic if booting with headset plugged

Joakim Tjernlund <[email protected]>
ALSA: usb-audio: Add delay quirk for H570e USB headsets

Thomas Gleixner <[email protected]>
x86/ioapic: Unbreak check_timer()

Mikulas Patocka <[email protected]>
arch/x86/lib/usercopy_64.c: fix __copy_user_flushcache() cache writeback

Sakari Ailus <[email protected]>
media: smiapp: Fix error handling at NVM reading

Russell King <[email protected]>
ASoC: kirkwood: fix IRQ error handling

Kangjie Lu <[email protected]>
gma/gma500: fix a memory disclosure bug due to uninitialized bytes

Fuqian Huang <[email protected]>
m68k: q40: Fix info-leak in rtc_ioctl

Balsundar P <[email protected]>
scsi: aacraid: fix illegal IO beyond last LBA

Jia He <[email protected]>
mm: fix double page fault on arm64 if PTE_AF is cleared

Lukas Wunner <[email protected]>
serial: 8250: Avoid error message on reprobe

Mark Gray <[email protected]>
geneve: add transport ports in route lookup for geneve

David Ahern <[email protected]>
ipv4: Update exception handling for multipath routes via same device

Eric Dumazet <[email protected]>
net: add __must_check to skb_put_padto()

Florian Fainelli <[email protected]>
net: phy: Avoid NPD upon phy_detach() when driver is unbound

Michael Chan <[email protected]>
bnxt_en: Protect bnxt_set_eee() and bnxt_set_pauseparam() with mutex.

Xin Long <[email protected]>
tipc: use skb_unshare() instead in tipc_buf_append()

Tetsuo Handa <[email protected]>
tipc: fix shutdown() of connection oriented socket

Necip Fazil Yildiran <[email protected]>
net: ipv6: fix kconfig dependency warning for IPV6_SEG6_HMAC

Wei Wang <[email protected]>
ip: fix tos reflection in ack and reset packets

Dan Carpenter <[email protected]>
hdlc_ppp: add range checks in ppp_cp_parse_cr()

Shamir Rabinovitch <[email protected]>
RDMA/ucma: ucma_context reference leak in error path

Ralph Campbell <[email protected]>
mm/thp: fix __split_huge_pmd_locked() for migration PMD

Muchun Song <[email protected]>
kprobes: fix kill kprobe which has been marked as gone

Rustam Kovhaev <[email protected]>
KVM: fix memory leak in kvm_io_bus_unregister_dev()

Sivaprakash Murugesan <[email protected]>
phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init

Mark Salyzyn <[email protected]>
af_key: pfkey_dump needs parameter validation

-------------

Diffstat:

 Documentation/devicetree/bindings/sound/wm8994.txt |  18 ++-
 Documentation/driver-api/libata.rst                |   2 +-
 Makefile                                           |   4 +-
 arch/arm64/kernel/cpufeature.c                     |  12 +-
 arch/m68k/q40/config.c                             |   1 +
 arch/mips/include/asm/cpu-type.h                   |   1 +
 arch/powerpc/kernel/eeh.c                          |   2 +-
 arch/powerpc/kernel/traps.c                        |   6 +-
 arch/s390/kernel/setup.c                           |   6 +-
 arch/x86/include/asm/nospec-branch.h               |   4 +-
 arch/x86/include/asm/pkeys.h                       |   5 +
 arch/x86/kernel/apic/io_apic.c                     |   1 +
 arch/x86/kernel/fpu/xstate.c                       |   9 +-
 arch/x86/kvm/mmutrace.h                            |   2 +-
 arch/x86/kvm/x86.c                                 |  10 +-
 arch/x86/lib/usercopy_64.c                         |   2 +-
 drivers/acpi/ec.c                                  |  16 +--
 drivers/ata/acard-ahci.c                           |   6 +-
 drivers/ata/libahci.c                              |   6 +-
 drivers/ata/libata-core.c                          |   9 +-
 drivers/ata/libata-sff.c                           |  12 +-
 drivers/ata/pata_macio.c                           |   6 +-
 drivers/ata/pata_pxa.c                             |   8 +-
 drivers/ata/pdc_adma.c                             |   7 +-
 drivers/ata/sata_fsl.c                             |   4 +-
 drivers/ata/sata_inic162x.c                        |   4 +-
 drivers/ata/sata_mv.c                              |  34 ++---
 drivers/ata/sata_nv.c                              |  18 +--
 drivers/ata/sata_promise.c                         |   6 +-
 drivers/ata/sata_qstor.c                           |   8 +-
 drivers/ata/sata_rcar.c                            |   6 +-
 drivers/ata/sata_sil.c                             |   8 +-
 drivers/ata/sata_sil24.c                           |   6 +-
 drivers/ata/sata_sx4.c                             |   6 +-
 drivers/atm/eni.c                                  |   2 +-
 drivers/char/tlclk.c                               |  17 +--
 drivers/char/tpm/tpm_ibmvtpm.c                     |   9 ++
 drivers/char/tpm/tpm_ibmvtpm.h                     |   1 +
 drivers/clk/ti/adpll.c                             |  11 +-
 drivers/clocksource/h8300_timer8.c                 |   2 +-
 drivers/cpufreq/powernv-cpufreq.c                  |  13 +-
 drivers/devfreq/tegra-devfreq.c                    |   4 +-
 drivers/dma/tegra20-apb-dma.c                      |   3 +-
 drivers/dma/xilinx/zynqmp_dma.c                    |  24 ++--
 drivers/gpu/drm/amd/amdgpu/atom.c                  |   4 +-
 drivers/gpu/drm/gma500/cdv_intel_display.c         |   2 +
 drivers/gpu/drm/nouveau/nouveau_debugfs.c          |   5 +-
 drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c    |   4 +-
 drivers/gpu/drm/vc4/vc4_hdmi.c                     |   1 +
 drivers/i2c/i2c-core-base.c                        |   2 +-
 drivers/infiniband/core/ucma.c                     |   6 +-
 drivers/infiniband/hw/cxgb4/cm.c                   |   4 +-
 drivers/infiniband/hw/i40iw/i40iw_cm.c             |   2 +-
 drivers/infiniband/sw/rxe/rxe.c                    |   2 +
 drivers/infiniband/sw/rxe/rxe_qp.c                 |   7 +-
 drivers/md/bcache/bcache.h                         |   1 +
 drivers/md/bcache/btree.c                          |  12 +-
 drivers/md/bcache/super.c                          |   1 +
 drivers/media/dvb-frontends/tda10071.c             |   9 +-
 drivers/media/i2c/smiapp/smiapp-core.c             |   3 +-
 drivers/media/platform/ti-vpe/cal.c                |   6 +-
 drivers/media/usb/go7007/go7007-usb.c              |   4 +-
 drivers/mfd/mfd-core.c                             |  10 ++
 drivers/mmc/core/mmc.c                             |   9 +-
 drivers/mtd/chips/cfi_cmdset_0002.c                |   1 -
 drivers/mtd/cmdlinepart.c                          |  23 +++-
 drivers/mtd/nand/omap_elm.c                        |   1 +
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c  |  31 +++--
 drivers/net/ethernet/intel/e1000/e1000_main.c      |  18 ++-
 drivers/net/ethernet/qlogic/qed/qed_sriov.c        |   1 +
 drivers/net/geneve.c                               |  37 ++++--
 drivers/net/ieee802154/adf7242.c                   |   4 +-
 drivers/net/ieee802154/ca8210.c                    |   1 +
 drivers/net/phy/phy_device.c                       |   3 +-
 drivers/net/wan/hdlc_ppp.c                         |  16 ++-
 drivers/net/wireless/ath/ar5523/ar5523.c           |   2 +
 drivers/net/wireless/ath/ath10k/sdio.c             |  18 ++-
 drivers/net/wireless/marvell/mwifiex/fw.h          |   2 +-
 drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c |   4 +-
 drivers/phy/qualcomm/phy-qcom-qmp.c                |  18 +--
 drivers/phy/samsung/phy-s5pv210-usb2.c             |   4 +
 drivers/power/supply/max17040_battery.c            |   2 +-
 drivers/rapidio/devices/rio_mport_cdev.c           |  14 +--
 drivers/rtc/rtc-ds1374.c                           |  15 ++-
 drivers/s390/block/dasd_fba.c                      |   9 +-
 drivers/scsi/aacraid/aachba.c                      |   8 +-
 drivers/scsi/aacraid/commsup.c                     |   2 +-
 drivers/scsi/aacraid/linit.c                       |  34 +++--
 drivers/scsi/fnic/fnic_scsi.c                      |   3 +-
 drivers/scsi/libfc/fc_rport.c                      |  13 +-
 drivers/scsi/lpfc/lpfc_ct.c                        | 137 +++++++++++----------
 drivers/scsi/lpfc/lpfc_hw.h                        |  36 +++---
 drivers/scsi/lpfc/lpfc_sli.c                       |   4 +
 drivers/scsi/qedi/qedi_iscsi.c                     |   3 +
 drivers/staging/media/imx/imx-media-capture.c      |   2 +-
 drivers/staging/rtl8188eu/core/rtw_recv.c          |  19 +--
 drivers/tty/serial/8250/8250_core.c                |  11 +-
 drivers/tty/serial/8250/8250_omap.c                |   8 +-
 drivers/tty/serial/8250/8250_port.c                |  16 ++-
 drivers/tty/serial/samsung.c                       |   8 +-
 drivers/tty/serial/xilinx_uartps.c                 |   8 ++
 drivers/tty/vcc.c                                  |   1 +
 drivers/usb/dwc3/gadget.c                          |   2 +-
 drivers/usb/host/ehci-mv.c                         |   8 +-
 drivers/vfio/pci/vfio_pci.c                        |  13 ++
 fs/block_dev.c                                     |  10 ++
 fs/btrfs/extent-tree.c                             |   2 -
 fs/btrfs/inode.c                                   |  23 ++--
 fs/ceph/caps.c                                     |  14 ++-
 fs/cifs/cifsglob.h                                 |   9 +-
 fs/cifs/file.c                                     |  21 ++--
 fs/cifs/misc.c                                     |  17 +--
 fs/cifs/smb1ops.c                                  |   8 +-
 fs/cifs/smb2misc.c                                 |  32 ++---
 fs/cifs/smb2ops.c                                  |  44 ++++---
 fs/cifs/smb2pdu.h                                  |   2 +-
 fs/ext4/inode.c                                    |   2 +-
 fs/fuse/dev.c                                      |   1 -
 fs/gfs2/inode.c                                    |  13 +-
 fs/nfs/pagelist.c                                  |  67 ++++++----
 fs/nfs/write.c                                     |  10 +-
 fs/ubifs/io.c                                      |  16 ++-
 fs/xfs/libxfs/xfs_attr_leaf.c                      |   4 +-
 fs/xfs/libxfs/xfs_dir2_node.c                      |   1 +
 include/linux/debugfs.h                            |   5 +-
 include/linux/libata.h                             |  13 +-
 include/linux/mmc/card.h                           |   2 +-
 include/linux/nfs_page.h                           |   2 +
 include/linux/seqlock.h                            |  11 +-
 include/linux/skbuff.h                             |  21 +++-
 kernel/audit_watch.c                               |   2 -
 kernel/bpf/hashtab.c                               |   8 --
 kernel/kprobes.c                                   |  14 ++-
 kernel/printk/printk.c                             |   3 +
 kernel/sys.c                                       |   4 +-
 kernel/time/timekeeping.c                          |   3 +-
 kernel/trace/trace.c                               |   5 +-
 kernel/trace/trace_entries.h                       |   2 +-
 kernel/trace/trace_events.c                        |   2 +
 lib/string.c                                       |  24 ++++
 mm/filemap.c                                       |   8 ++
 mm/huge_memory.c                                   |  40 +++---
 mm/kmemleak.c                                      |   2 +-
 mm/memory.c                                        | 121 +++++++++++++++---
 mm/mmap.c                                          |   2 +
 mm/pagewalk.c                                      |   4 +-
 mm/swap_state.c                                    |   5 +-
 mm/swapfile.c                                      |   2 +-
 mm/vmscan.c                                        |  45 ++++---
 net/atm/lec.c                                      |   6 +
 net/batman-adv/bridge_loop_avoidance.c             |  42 +++++--
 net/batman-adv/bridge_loop_avoidance.h             |   4 +-
 net/batman-adv/routing.c                           |   4 +
 net/batman-adv/soft-interface.c                    |   6 +-
 net/bluetooth/hci_event.c                          |  25 +++-
 net/bluetooth/l2cap_core.c                         |  29 +++--
 net/bluetooth/l2cap_sock.c                         |  18 ++-
 net/core/neighbour.c                               |   1 +
 net/ipv4/ip_output.c                               |   3 +-
 net/ipv4/route.c                                   |  12 +-
 net/ipv6/Kconfig                                   |   1 +
 net/key/af_key.c                                   |   7 ++
 net/mac802154/tx.c                                 |   8 +-
 net/sunrpc/svc_xprt.c                              |  19 ++-
 net/sunrpc/xprtrdma/svc_rdma_backchannel.c         |   1 +
 net/tipc/msg.c                                     |   3 +-
 net/tipc/socket.c                                  |   5 +-
 net/unix/af_unix.c                                 |  11 +-
 security/selinux/selinuxfs.c                       |   1 +
 sound/hda/hdac_bus.c                               |   4 +
 sound/pci/asihpi/hpioctl.c                         |   4 +-
 sound/pci/hda/hda_controller.c                     |  11 +-
 sound/pci/hda/patch_realtek.c                      |   6 +-
 sound/soc/kirkwood/kirkwood-dma.c                  |   2 +-
 sound/usb/midi.c                                   |  29 ++++-
 sound/usb/quirks.c                                 |   7 +-
 tools/gpio/gpio-hammer.c                           |  17 ++-
 tools/objtool/check.c                              |   2 +-
 tools/perf/tests/shell/lib/probe_vfs_getname.sh    |   2 +-
 tools/perf/util/cpumap.c                           |  10 +-
 tools/perf/util/sort.c                             |   2 +-
 tools/perf/util/symbol-elf.c                       |   7 ++
 .../x86/intel_pstate_tracer/intel_pstate_tracer.py |  22 ++--
 .../ftrace/test.d/ftrace/func-filter-glob.tc       |   2 +-
 tools/testing/selftests/x86/syscall_nt.c           |   1 +
 virt/kvm/kvm_main.c                                |  22 ++--
 186 files changed, 1320 insertions(+), 677 deletions(-)
author maintainer
#21 lore raw

PATCH 21/166 gma/gma500: fix a memory disclosure bug due to uninitialized bytes

From: Kangjie Lu <[email protected]>

[ Upstream commit 57a25a5f754ce27da2cfa6f413cfd366f878db76 ]

best_clock is an object that may be sent out. Object clock contains uninitialized bytes that are copied to best_clock, which leads to memory disclosure and information leak.

---
 drivers/gpu/drm/gma500/cdv_intel_display.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/gma500/cdv_intel_display.c +2 -0
index 17db4b4749d5a..2e8479744ca4a 100644
@@ -415,6 +415,8 @@ static bool cdv_intel_find_dp_pll(const struct gma_limit_t *limit,
 	struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
 	struct gma_clock_t clock;
 
+	memset(&clock, 0, sizeof(clock));
+
 	switch (refclk) {
 	case 27000:
 		if (target < 200000) {
Signature · 1 line
2.25.1
author maintainer
#35 lore raw

PATCH 35/166 RDMA/i40iw: Fix potential use after free

In reply to Greg Kroah-Hartman

From: Pan Bian <[email protected]>

[ Upstream commit da046d5f895fca18d63b15ac8faebd5bf784e23a ]

Release variable dst after logging dst->error to avoid possible use after free.

---
 drivers/infiniband/hw/i40iw/i40iw_cm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/infiniband/hw/i40iw/i40iw_cm.c +1 -1
index 880c63579ba88..adec03412506d 100644
@@ -2052,9 +2052,9 @@ static int i40iw_addr_resolve_neigh_ipv6(struct i40iw_device *iwdev,
 	dst = i40iw_get_dst_ipv6(&src_addr, &dst_addr);
 	if (!dst || dst->error) {
 		if (dst) {
-			dst_release(dst);
 			i40iw_pr_err("ip6_route_output returned dst->error = %d\n",
 				     dst->error);
+			dst_release(dst);
 		}
 		return rc;
 	}
Signature · 1 line
2.25.1
author maintainer
#34 lore raw

PATCH 34/166 bcache: fix a lost wake-up problem caused by mca_cannibalize_lock

In reply to Greg Kroah-Hartman

From: Guoju Fang <[email protected]>

[ Upstream commit 34cf78bf34d48dddddfeeadb44f9841d7864997a ]

This patch fix a lost wake-up problem caused by the race between mca_cannibalize_lock and bch_cannibalize_unlock.

Consider two processes, A and B. Process A is executing mca_cannibalize_lock, while process B takes c->btree_cache_alloc_lock and is executing bch_cannibalize_unlock. The problem happens that after process A executes cmpxchg and will execute prepare_to_wait. In this timeslice process B executes wake_up, but after that process A executes prepare_to_wait and set the state to TASK_INTERRUPTIBLE. Then process A goes to sleep but no one will wake up it. This problem may cause bcache device to dead.

---
 drivers/md/bcache/bcache.h |  1 +
 drivers/md/bcache/btree.c  | 12 ++++++++----
 drivers/md/bcache/super.c  |  1 +
 3 files changed, 10 insertions(+), 4 deletions(-)
drivers/md/bcache/bcache.h +1 -0
index e4a3f692057b8..a3763d664a67a 100644
@@ -548,6 +548,7 @@ struct cache_set {
 	 */
 	wait_queue_head_t	btree_cache_wait;
 	struct task_struct	*btree_cache_alloc_lock;
+	spinlock_t		btree_cannibalize_lock;
 
 	/*
 	 * When we free a btree node, we increment the gen of the bucket the
drivers/md/bcache/btree.c +8 -4
index 9fca837d0b41e..fba0fff8040d6 100644
@@ -840,15 +840,17 @@ out:
 
 static int mca_cannibalize_lock(struct cache_set *c, struct btree_op *op)
 {
-	struct task_struct *old;
-
-	old = cmpxchg(&c->btree_cache_alloc_lock, NULL, current);
-	if (old && old != current) {
+	spin_lock(&c->btree_cannibalize_lock);
+	if (likely(c->btree_cache_alloc_lock == NULL)) {
+		c->btree_cache_alloc_lock = current;
+	} else if (c->btree_cache_alloc_lock != current) {
 		if (op)
 			prepare_to_wait(&c->btree_cache_wait, &op->wait,
 					TASK_UNINTERRUPTIBLE);
+		spin_unlock(&c->btree_cannibalize_lock);
 		return -EINTR;
 	}
+	spin_unlock(&c->btree_cannibalize_lock);
 
 	return 0;
 }
@@ -883,10 +885,12 @@ static struct btree *mca_cannibalize(struct cache_set *c, struct btree_op *op,
  */
 static void bch_cannibalize_unlock(struct cache_set *c)
 {
+	spin_lock(&c->btree_cannibalize_lock);
 	if (c->btree_cache_alloc_lock == current) {
 		c->btree_cache_alloc_lock = NULL;
 		wake_up(&c->btree_cache_wait);
 	}
+	spin_unlock(&c->btree_cannibalize_lock);
 }
 
 static struct btree *mca_alloc(struct cache_set *c, struct btree_op *op,
drivers/md/bcache/super.c +1 -0
index 7fcc1ba12bc01..6bf1559a1f0db 100644
@@ -1510,6 +1510,7 @@ struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
 	sema_init(&c->sb_write_mutex, 1);
 	mutex_init(&c->bucket_lock);
 	init_waitqueue_head(&c->btree_cache_wait);
+	spin_lock_init(&c->btree_cannibalize_lock);
 	init_waitqueue_head(&c->bucket_wait);
 	init_waitqueue_head(&c->gc_wait);
 	sema_init(&c->uuid_write_mutex, 1);
Signature · 1 line
2.25.1
author maintainer
#32 lore raw

PATCH 32/166 mfd: mfd-core: Protect against NULL call-back function pointer

In reply to Greg Kroah-Hartman

From: Lee Jones <[email protected]>

[ Upstream commit b195e101580db390f50b0d587b7f66f241d2bc88 ]

If a child device calls mfd_cell_{en,dis}able() without an appropriate call-back being set, we are likely to encounter a panic. Avoid this by adding suitable checking.

---
 drivers/mfd/mfd-core.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/mfd/mfd-core.c +10 -0
index 5c8ed2150c8bf..fb687368ac98c 100644
@@ -32,6 +32,11 @@ int mfd_cell_enable(struct platform_device *pdev)
 	const struct mfd_cell *cell = mfd_get_cell(pdev);
 	int err = 0;
 
+	if (!cell->enable) {
+		dev_dbg(&pdev->dev, "No .enable() call-back registered\n");
+		return 0;
+	}
+
 	/* only call enable hook if the cell wasn't previously enabled */
 	if (atomic_inc_return(cell->usage_count) == 1)
 		err = cell->enable(pdev);
@@ -49,6 +54,11 @@ int mfd_cell_disable(struct platform_device *pdev)
 	const struct mfd_cell *cell = mfd_get_cell(pdev);
 	int err = 0;
 
+	if (!cell->disable) {
+		dev_dbg(&pdev->dev, "No .disable() call-back registered\n");
+		return 0;
+	}
+
 	/* only disable if no other clients are using it */
 	if (atomic_dec_return(cell->usage_count) == 0)
 		err = cell->disable(pdev);
Signature · 1 line
2.25.1
author maintainer
#33 lore raw

PATCH 33/166 tracing: Adding NULL checks for trace_array descriptor pointer

In reply to Greg Kroah-Hartman

From: Divya Indi <[email protected]>

[ Upstream commit 953ae45a0c25e09428d4a03d7654f97ab8a36647 ]

As part of commit f45d1225adb0 ("tracing: Kernel access to Ftrace instances") we exported certain functions. Here, we are adding some additional NULL checks to ensure safe usage by users of these APIs.

---
 kernel/trace/trace.c        | 3 +++
 kernel/trace/trace_events.c | 2 ++
 2 files changed, 5 insertions(+)
kernel/trace/trace.c +3 -0
index 95ede1f7ffdf3..22759f5607192 100644
@@ -3035,6 +3035,9 @@ int trace_array_printk(struct trace_array *tr,
 	if (!(global_trace.trace_flags & TRACE_ITER_PRINTK))
 		return 0;
 
+	if (!tr)
+		return -ENOENT;
+
 	va_start(ap, fmt);
 	ret = trace_array_vprintk(tr, ip, fmt, ap);
 	va_end(ap);
kernel/trace/trace_events.c +2 -0
index e72a44ecb81da..d69c79ac97986 100644
@@ -799,6 +799,8 @@ static int ftrace_set_clr_event(struct trace_array *tr, char *buf, int set)
 	char *event = NULL, *sub = NULL, *match;
 	int ret;
 
+	if (!tr)
+		return -ENOENT;
 	/*
 	 * The buf format can be <subsystem>:<event-name>
 	 *  *:<event-name> means any event by that name.
Signature · 1 line
2.25.1
author maintainer
#9 lore raw

PATCH 9/166 net: ipv6: fix kconfig dependency warning for IPV6_SEG6_HMAC

In reply to Greg Kroah-Hartman

From: Necip Fazil Yildiran <[email protected]>

[ Upstream commit db7cd91a4be15e1485d6b58c6afc8761c59c4efb ]

When IPV6_SEG6_HMAC is enabled and CRYPTO is disabled, it results in the following Kbuild warning:

WARNING: unmet direct dependencies detected for CRYPTO_HMAC
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]

WARNING: unmet direct dependencies detected for CRYPTO_SHA1
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]

WARNING: unmet direct dependencies detected for CRYPTO_SHA256
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]

The reason is that IPV6_SEG6_HMAC selects CRYPTO_HMAC, CRYPTO_SHA1, and CRYPTO_SHA256 without depending on or selecting CRYPTO while those configs are subordinate to CRYPTO.

Honor the kconfig menu hierarchy to remove kconfig dependency warnings.

Fixes bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support")
---
 net/ipv6/Kconfig |    1 +
 1 file changed, 1 insertion(+)
net/ipv6/Kconfig +1 -0
@@ -321,6 +321,7 @@ config IPV6_SEG6_LWTUNNEL
 config IPV6_SEG6_HMAC
 	bool "IPv6: Segment Routing HMAC support"
 	depends on IPV6
+	select CRYPTO
 	select CRYPTO_HMAC
 	select CRYPTO_SHA1
 	select CRYPTO_SHA256
author maintainer
#7 lore raw

PATCH 7/166 hdlc_ppp: add range checks in ppp_cp_parse_cr()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 66d42ed8b25b64eb63111a2b8582c5afc8bf1105 ]

There are a couple bugs here:
1) If opt[1] is zero then this results in a forever loop. If the value is less than 2 then it is invalid.
2) It assumes that "len" is more than sizeof(valid_accm) or 6 which can result in memory corruption.

In the case of LCP_OPTION_ACCM, then we should check "opt[1]" instead of "len" because, if "opt[1]" is less than sizeof(valid_accm) then "nak_len" gets out of sync and it can lead to memory corruption in the next iterations through the loop. In case of LCP_OPTION_MAGIC, the only valid value for opt[1] is 6, but the code is trying to log invalid data so we should only discard the data when "len" is less than 6 because that leads to a read overflow.

---
 drivers/net/wan/hdlc_ppp.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)
drivers/net/wan/hdlc_ppp.c +11 -5
@@ -386,11 +386,8 @@ static void ppp_cp_parse_cr(struct net_d
 	}
 
 	for (opt = data; len; len -= opt[1], opt += opt[1]) {
-		if (len < 2 || len < opt[1]) {
-			dev->stats.rx_errors++;
-			kfree(out);
-			return; /* bad packet, drop silently */
-		}
+		if (len < 2 || opt[1] < 2 || len < opt[1])
+			goto err_out;
 
 		if (pid == PID_LCP)
 			switch (opt[0]) {
@@ -398,6 +395,8 @@ static void ppp_cp_parse_cr(struct net_d
 				continue; /* MRU always OK and > 1500 bytes? */
 
 			case LCP_OPTION_ACCM: /* async control character map */
+				if (opt[1] < sizeof(valid_accm))
+					goto err_out;
 				if (!memcmp(opt, valid_accm,
 					    sizeof(valid_accm)))
 					continue;
@@ -409,6 +408,8 @@ static void ppp_cp_parse_cr(struct net_d
 				}
 				break;
 			case LCP_OPTION_MAGIC:
+				if (len < 6)
+					goto err_out;
 				if (opt[1] != 6 || (!opt[2] && !opt[3] &&
 						    !opt[4] && !opt[5]))
 					break; /* reject invalid magic number */
@@ -427,6 +428,11 @@ static void ppp_cp_parse_cr(struct net_d
 		ppp_cp_event(dev, pid, RCR_GOOD, CP_CONF_ACK, id, req_len, data);
 
 	kfree(out);
+	return;
+
+err_out:
+	dev->stats.rx_errors++;
+	kfree(out);
 }
 
 static int ppp_rx(struct sk_buff *skb)
author maintainer
#43 lore raw

PATCH 43/166 neigh_stat_seq_next() should increase position index

In reply to Greg Kroah-Hartman

From: Vasily Averin <[email protected]>

[ Upstream commit 1e3f9f073c47bee7c23e77316b07bc12338c5bba ]

if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283

---
 net/core/neighbour.c | 1 +
 1 file changed, 1 insertion(+)
net/core/neighbour.c +1 -0
index 567e431813e59..20f6c634ad68a 100644
@@ -2836,6 +2836,7 @@ static void *neigh_stat_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 		*pos = cpu+1;
 		return per_cpu_ptr(tbl->stats, cpu);
 	}
+	(*pos)++;
 	return NULL;
 }
 
Signature · 1 line
2.25.1
author maintainer
#8 lore raw

PATCH 8/166 ip: fix tos reflection in ack and reset packets

In reply to Greg Kroah-Hartman

From: Wei Wang <[email protected]>

[ Upstream commit ba9e04a7ddf4f22a10e05bf9403db6b97743c7bf ]

Currently, in tcp_v4_reqsk_send_ack() and tcp_v4_send_reset(), we echo the TOS value of the received packets in the response. However, we do not want to echo the lower 2 ECN bits in accordance with RFC 3168 6.1.5 robustness principles.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 net/ipv4/ip_output.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/ipv4/ip_output.c +2 -1
@@ -73,6 +73,7 @@
 #include <net/icmp.h>
 #include <net/checksum.h>
 #include <net/inetpeer.h>
+#include <net/inet_ecn.h>
 #include <net/lwtunnel.h>
 #include <linux/bpf-cgroup.h>
 #include <linux/igmp.h>
@@ -1562,7 +1563,7 @@ void ip_send_unicast_reply(struct sock *
 	if (IS_ERR(rt))
 		return;
 
-	inet_sk(sk)->tos = arg->tos;
+	inet_sk(sk)->tos = arg->tos & ~INET_ECN_MASK;
 
 	sk->sk_priority = skb->priority;
 	sk->sk_protocol = ip_hdr(skb)->protocol;
author maintainer
#44 lore raw

PATCH 44/166 rt_cpu_seq_next should increase position index

In reply to Greg Kroah-Hartman

From: Vasily Averin <[email protected]>

[ Upstream commit a3ea86739f1bc7e121d921842f0f4a8ab1af94d9 ]

if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283

---
 net/ipv4/route.c | 1 +
 1 file changed, 1 insertion(+)
net/ipv4/route.c +1 -0
index ed835ca068798..6fcb12e083d99 100644
@@ -276,6 +276,7 @@ static void *rt_cpu_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 		*pos = cpu+1;
 		return &per_cpu(rt_cache_stat, cpu);
 	}
+	(*pos)++;
 	return NULL;
 
 }
Signature · 1 line
2.25.1
author maintainer
#48 lore raw

PATCH 48/166 dmaengine: zynqmp_dma: fix burst length configuration

In reply to Greg Kroah-Hartman

From: Matthias Fend <[email protected]>

[ Upstream commit cc88525ebffc757e00cc5a5d61da6271646c7f5f ]

Since the dma engine expects the burst length register content as power of 2 value, the burst length needs to be converted first. Additionally add a burst length range check to avoid corrupting unrelated register bits.

---
 drivers/dma/xilinx/zynqmp_dma.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)
drivers/dma/xilinx/zynqmp_dma.c +15 -9
index 6d86d05e53aa1..66d6640766ed8 100644
@@ -125,10 +125,12 @@
 /* Max transfer size per descriptor */
 #define ZYNQMP_DMA_MAX_TRANS_LEN	0x40000000
 
+/* Max burst lengths */
+#define ZYNQMP_DMA_MAX_DST_BURST_LEN    32768U
+#define ZYNQMP_DMA_MAX_SRC_BURST_LEN    32768U
+
 /* Reset values for data attributes */
 #define ZYNQMP_DMA_AXCACHE_VAL		0xF
-#define ZYNQMP_DMA_ARLEN_RST_VAL	0xF
-#define ZYNQMP_DMA_AWLEN_RST_VAL	0xF
 
 #define ZYNQMP_DMA_SRC_ISSUE_RST_VAL	0x1F
 
@@ -527,17 +529,19 @@ static void zynqmp_dma_handle_ovfl_int(struct zynqmp_dma_chan *chan, u32 status)
 
 static void zynqmp_dma_config(struct zynqmp_dma_chan *chan)
 {
-	u32 val;
+	u32 val, burst_val;
 
 	val = readl(chan->regs + ZYNQMP_DMA_CTRL0);
 	val |= ZYNQMP_DMA_POINT_TYPE_SG;
 	writel(val, chan->regs + ZYNQMP_DMA_CTRL0);
 
 	val = readl(chan->regs + ZYNQMP_DMA_DATA_ATTR);
+	burst_val = __ilog2_u32(chan->src_burst_len);
 	val = (val & ~ZYNQMP_DMA_ARLEN) |
-		(chan->src_burst_len << ZYNQMP_DMA_ARLEN_OFST);
+		((burst_val << ZYNQMP_DMA_ARLEN_OFST) & ZYNQMP_DMA_ARLEN);
+	burst_val = __ilog2_u32(chan->dst_burst_len);
 	val = (val & ~ZYNQMP_DMA_AWLEN) |
-		(chan->dst_burst_len << ZYNQMP_DMA_AWLEN_OFST);
+		((burst_val << ZYNQMP_DMA_AWLEN_OFST) & ZYNQMP_DMA_AWLEN);
 	writel(val, chan->regs + ZYNQMP_DMA_DATA_ATTR);
 }
 
@@ -551,8 +555,10 @@ static int zynqmp_dma_device_config(struct dma_chan *dchan,
 {
 	struct zynqmp_dma_chan *chan = to_chan(dchan);
 
-	chan->src_burst_len = config->src_maxburst;
-	chan->dst_burst_len = config->dst_maxburst;
+	chan->src_burst_len = clamp(config->src_maxburst, 1U,
+		ZYNQMP_DMA_MAX_SRC_BURST_LEN);
+	chan->dst_burst_len = clamp(config->dst_maxburst, 1U,
+		ZYNQMP_DMA_MAX_DST_BURST_LEN);
 
 	return 0;
 }
@@ -873,8 +879,8 @@ static int zynqmp_dma_chan_probe(struct zynqmp_dma_device *zdev,
 		return PTR_ERR(chan->regs);
 
 	chan->bus_width = ZYNQMP_DMA_BUS_WIDTH_64;
-	chan->dst_burst_len = ZYNQMP_DMA_AWLEN_RST_VAL;
-	chan->src_burst_len = ZYNQMP_DMA_ARLEN_RST_VAL;
+	chan->dst_burst_len = ZYNQMP_DMA_MAX_DST_BURST_LEN;
+	chan->src_burst_len = ZYNQMP_DMA_MAX_SRC_BURST_LEN;
 	err = of_property_read_u32(node, "xlnx,bus-width", &chan->bus_width);
 	if (err < 0) {
 		dev_err(&pdev->dev, "missing xlnx,bus-width property\n");
Signature · 1 line
2.25.1
author maintainer
#47 lore raw

PATCH 47/166 ACPI: EC: Reference count query handlers under lock

In reply to Greg Kroah-Hartman

From: Rafael J. Wysocki <[email protected]>

[ Upstream commit 3df663a147fe077a6ee8444ec626738946e65547 ]

There is a race condition in acpi_ec_get_query_handler() theoretically allowing query handlers to go away before refernce counting them.

In order to avoid it, call kref_get() on query handlers under ec->mutex.

Also simplify the code a bit while at it.

---
 drivers/acpi/ec.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)
drivers/acpi/ec.c +4 -12
index ebfc06f29f7b2..37aacb39e6922 100644
@@ -1062,29 +1062,21 @@ void acpi_ec_unblock_transactions(void)
 /* --------------------------------------------------------------------------
                                 Event Management
    -------------------------------------------------------------------------- */
-static struct acpi_ec_query_handler *
-acpi_ec_get_query_handler(struct acpi_ec_query_handler *handler)
-{
-	if (handler)
-		kref_get(&handler->kref);
-	return handler;
-}
-
 static struct acpi_ec_query_handler *
 acpi_ec_get_query_handler_by_value(struct acpi_ec *ec, u8 value)
 {
 	struct acpi_ec_query_handler *handler;
-	bool found = false;
 
 	mutex_lock(&ec->mutex);
 	list_for_each_entry(handler, &ec->list, node) {
 		if (value == handler->query_bit) {
-			found = true;
-			break;
+			kref_get(&handler->kref);
+			mutex_unlock(&ec->mutex);
+			return handler;
 		}
 	}
 	mutex_unlock(&ec->mutex);
-	return found ? acpi_ec_get_query_handler(handler) : NULL;
+	return NULL;
 }
 
 static void acpi_ec_query_handler_release(struct kref *kref)
Signature · 1 line
2.25.1
author maintainer
#50 lore raw

PATCH 50/166 tracing: Set kernel_stacks caller size properly

In reply to Greg Kroah-Hartman

From: Josef Bacik <[email protected]>

[ Upstream commit cbc3b92ce037f5e7536f6db157d185cd8b8f615c ]

I noticed when trying to use the trace-cmd python interface that reading the raw buffer wasn't working for kernel_stack events. This is because it uses a stubbed version of __dynamic_array that doesn't do the __data_loc trick and encode the length of the array into the field. Instead it just shows up as a size of 0. So change this to __array and set the len to FTRACE_STACK_ENTRIES since this is what we actually do in practice and matches how user_stack_trace works.

[ Pulled from the archeological digging of my INBOX ]
---
 kernel/trace/trace_entries.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/trace/trace_entries.h +1 -1
index e3a658bac10fe..ff91acff72946 100644
@@ -179,7 +179,7 @@ FTRACE_ENTRY(kernel_stack, stack_entry,
 
 	F_STRUCT(
 		__field(	int,		size	)
-		__dynamic_array(unsigned long,	caller	)
+		__array(	unsigned long,	caller,	FTRACE_STACK_ENTRIES	)
 	),
 
 	F_printk("\t=> (" IP_FMT ")\n\t=> (" IP_FMT ")\n\t=> (" IP_FMT ")\n"
Signature · 1 line
2.25.1
author maintainer
#49 lore raw

PATCH 49/166 powerpc/eeh: Only dump stack once if an MMIO loop is detected

In reply to Greg Kroah-Hartman

From: Oliver O'Halloran <[email protected]>

[ Upstream commit 4e0942c0302b5ad76b228b1a7b8c09f658a1d58a ]

Many drivers don't check for errors when they get a 0xFFs response from an MMIO load. As a result after an EEH event occurs a driver can get stuck in a polling loop unless it some kind of internal timeout logic.

Currently EEH tries to detect and report stuck drivers by dumping a stack trace after eeh_dev_check_failure() is called EEH_MAX_FAILS times on an already frozen PE. The value of EEH_MAX_FAILS was chosen so that a dump would occur every few seconds if the driver was spinning in a loop. This results in a lot of spurious stack traces in the kernel log.

Fix this by limiting it to printing one stack trace for each PE freeze. If the driver is truely stuck the kernel's hung task detector is better suited to reporting the probelm anyway.

---
 arch/powerpc/kernel/eeh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/kernel/eeh.c +1 -1
index d2ba7936d0d33..7b46576962bfd 100644
@@ -506,7 +506,7 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
 	rc = 1;
 	if (pe->state & EEH_PE_ISOLATED) {
 		pe->check_count++;
-		if (pe->check_count % EEH_MAX_FAILS == 0) {
+		if (pe->check_count == EEH_MAX_FAILS) {
 			dn = pci_device_to_OF_node(dev);
 			if (dn)
 				location = of_get_property(dn, "ibm,loc-code",
Signature · 1 line
2.25.1
author maintainer
#46 lore raw

PATCH 46/166 media: ti-vpe: cal: Restrict DMA to avoid memory corruption

In reply to Greg Kroah-Hartman

From: Nikhil Devshatwar <[email protected]>

[ Upstream commit 6e72eab2e7b7a157d554b8f9faed7676047be7c1 ]

When setting DMA for video capture from CSI channel, if the DMA size is not given, it ends up writing as much data as sent by the camera.

This may lead to overwriting the buffers causing memory corruption. Observed green lines on the default framebuffer.

Restrict the DMA to maximum height as specified in the S_FMT ioctl.

---
 drivers/media/platform/ti-vpe/cal.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/media/platform/ti-vpe/cal.c +4 -2
index b6dcae1ecc1be..ad344e642ddb7 100644
@@ -687,12 +687,13 @@ static void pix_proc_config(struct cal_ctx *ctx)
 }
 
 static void cal_wr_dma_config(struct cal_ctx *ctx,
-			      unsigned int width)
+			      unsigned int width, unsigned int height)
 {
 	u32 val;
 
 	val = reg_read(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port));
 	set_field(&val, ctx->csi2_port, CAL_WR_DMA_CTRL_CPORT_MASK);
+	set_field(&val, height, CAL_WR_DMA_CTRL_YSIZE_MASK);
 	set_field(&val, CAL_WR_DMA_CTRL_DTAG_PIX_DAT,
 		  CAL_WR_DMA_CTRL_DTAG_MASK);
 	set_field(&val, CAL_WR_DMA_CTRL_MODE_CONST,
@@ -1318,7 +1319,8 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
 	csi2_lane_config(ctx);
 	csi2_ctx_config(ctx);
 	pix_proc_config(ctx);
-	cal_wr_dma_config(ctx, ctx->v_fmt.fmt.pix.bytesperline);
+	cal_wr_dma_config(ctx, ctx->v_fmt.fmt.pix.bytesperline,
+			  ctx->v_fmt.fmt.pix.height);
 	cal_wr_dma_addr(ctx, addr);
 	csi2_ppi_enable(ctx);
 
Signature · 1 line
2.25.1
author maintainer
#23 lore raw

PATCH 23/166 media: smiapp: Fix error handling at NVM reading

In reply to Greg Kroah-Hartman

From: Sakari Ailus <[email protected]>

[ Upstream commit a5b1d5413534607b05fb34470ff62bf395f5c8d0 ]

If NVM reading failed, the device was left powered on. Fix that.

---
 drivers/media/i2c/smiapp/smiapp-core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/media/i2c/smiapp/smiapp-core.c +2 -1
index e4d7f2febf00c..05b3974bd9202 100644
@@ -2338,11 +2338,12 @@ smiapp_sysfs_nvm_read(struct device *dev, struct device_attribute *attr,
 		if (rval < 0) {
 			if (rval != -EBUSY && rval != -EAGAIN)
 				pm_runtime_set_active(&client->dev);
-			pm_runtime_put(&client->dev);
+			pm_runtime_put_noidle(&client->dev);
 			return -ENODEV;
 		}
 
 		if (smiapp_read_nvm(sensor, sensor->nvm)) {
+			pm_runtime_put(&client->dev);
 			dev_err(&client->dev, "nvm read failed\n");
 			return -ENODEV;
 		}
Signature · 1 line
2.25.1
author maintainer
#26 lore raw

PATCH 26/166 ALSA: usb-audio: Add delay quirk for H570e USB headsets

In reply to Greg Kroah-Hartman

From: Joakim Tjernlund <[email protected]>

commit 315c7ad7a701baba28c628c4c5426b3d9617ceed upstream.

Needs the same delay as H650e

---
 sound/usb/quirks.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
sound/usb/quirks.c +4 -3
@@ -1322,12 +1322,13 @@ void snd_usb_ctl_msg_quirk(struct usb_de
 	    && (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
 		mdelay(20);
 
-	/* Zoom R16/24, Logitech H650e, Jabra 550a, Kingston HyperX needs a tiny
-	 * delay here, otherwise requests like get/set frequency return as
-	 * failed despite actually succeeding.
+	/* Zoom R16/24, Logitech H650e/H570e, Jabra 550a, Kingston HyperX
+	 *  needs a tiny delay here, otherwise requests like get/set
+	 *  frequency return as failed despite actually succeeding.
 	 */
 	if ((chip->usb_id == USB_ID(0x1686, 0x00dd) ||
 	     chip->usb_id == USB_ID(0x046d, 0x0a46) ||
+	     chip->usb_id == USB_ID(0x046d, 0x0a56) ||
 	     chip->usb_id == USB_ID(0x0b0e, 0x0349) ||
 	     chip->usb_id == USB_ID(0x0951, 0x16ad)) &&
 	    (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
author maintainer
#24 lore raw

PATCH 24/166 arch/x86/lib/usercopy_64.c: fix __copy_user_flushcache() cache writeback

In reply to Greg Kroah-Hartman

From: Mikulas Patocka <[email protected]>

commit a1cd6c2ae47ee10ff21e62475685d5b399e2ed4a upstream.

If we copy less than 8 bytes and if the destination crosses a cache line, __copy_user_flushcache would invalidate only the first cache line.

This patch makes it invalidate the second cache line as well.

Fixes 0aed55af88345b ("x86, uaccess: introduce copy_from_iter_flushcache for pmem / cache-bypass operations")
Cc Jan Kara <[email protected]>
Cc Jeff Moyer <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Christoph Hellwig <[email protected]>
Cc Toshi Kani <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Al Viro <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Matthew Wilcox <[email protected]>
Cc Ross Zwisler <[email protected]>
Cc Ingo Molnar <[email protected]>
---
 arch/x86/lib/usercopy_64.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/lib/usercopy_64.c +1 -1
@@ -118,7 +118,7 @@ long __copy_user_flushcache(void *dst, c
 	 */
 	if (size < 8) {
 		if (!IS_ALIGNED(dest, 4) || size != 4)
-			clean_cache_range(dst, 1);
+			clean_cache_range(dst, size);
 	} else {
 		if (!IS_ALIGNED(dest, 8)) {
 			dest = ALIGN(dest, boot_cpu_data.x86_clflush_size);
author maintainer
#28 lore raw

PATCH 28/166 PM / devfreq: tegra30: Fix integer overflow on CPUs freq max out

In reply to Greg Kroah-Hartman

From: Dmitry Osipenko <[email protected]>

[ Upstream commit 53b4b2aeee26f42cde5ff2a16dd0d8590c51a55a ]

There is another kHz-conversion bug in the code, resulting in integer overflow. Although, this time the resulting value is 4294966296 and it's close to ULONG_MAX, which is okay in this case.

---
 drivers/devfreq/tegra-devfreq.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/devfreq/tegra-devfreq.c +3 -1
index 6627a7dce95c4..f6a2dd6b188fa 100644
@@ -79,6 +79,8 @@
 
 #define KHZ							1000
 
+#define KHZ_MAX						(ULONG_MAX / KHZ)
+
 /* Assume that the bus is saturated if the utilization is 25% */
 #define BUS_SATURATION_RATIO					25
 
@@ -179,7 +181,7 @@ struct tegra_actmon_emc_ratio {
 };
 
 static struct tegra_actmon_emc_ratio actmon_emc_ratios[] = {
-	{ 1400000, ULONG_MAX },
+	{ 1400000,    KHZ_MAX },
 	{ 1200000,    750000 },
 	{ 1100000,    600000 },
 	{ 1000000,    500000 },
Signature · 1 line
2.25.1
author maintainer
#29 lore raw

PATCH 29/166 scsi: fnic: fix use after free

In reply to Greg Kroah-Hartman

From: Pan Bian <[email protected]>

[ Upstream commit ec990306f77fd4c58c3b27cc3b3c53032d6e6670 ]

The memory chunk io_req is released by mempool_free. Accessing io_req->start_time will result in a use after free bug. The variable start_time is a backup of the timestamp. So, use start_time here to avoid use after free.

---
 drivers/scsi/fnic/fnic_scsi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/scsi/fnic/fnic_scsi.c +2 -1
index d79ac0b24f5af..04c25ca2be45f 100644
@@ -1034,7 +1034,8 @@ static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic,
 		atomic64_inc(&fnic_stats->io_stats.io_completions);
 
 
-	io_duration_time = jiffies_to_msecs(jiffies) - jiffies_to_msecs(io_req->start_time);
+	io_duration_time = jiffies_to_msecs(jiffies) -
+						jiffies_to_msecs(start_time);
 
 	if(io_duration_time <= 10)
 		atomic64_inc(&fnic_stats->io_stats.io_btw_0_to_10_msec);
Signature · 1 line
2.25.1
author maintainer
#54 lore raw

PATCH 54/166 Bluetooth: Fix refcount use-after-free issue

In reply to Greg Kroah-Hartman

From: Manish Mandlik <[email protected]>

[ Upstream commit 6c08fc896b60893c5d673764b0668015d76df462 ]

There is no lock preventing both l2cap_sock_release() and chan->ops->close() from running at the same time.

If we consider Thread A running l2cap_chan_timeout() and Thread B running l2cap_sock_release(), expected behavior is:
A::l2cap_chan_timeout()->l2cap_chan_close()->l2cap_sock_teardown_cb() A::l2cap_chan_timeout()->l2cap_sock_close_cb()->l2cap_sock_kill() B::l2cap_sock_release()->sock_orphan() B::l2cap_sock_release()->l2cap_sock_kill()

where,
sock_orphan() clears "sk->sk_socket" and l2cap_sock_teardown_cb() marks socket as SOCK_ZAPPED.

In l2cap_sock_kill(), there is an "if-statement" that checks if both sock_orphan() and sock_teardown() has been run i.e. sk->sk_socket is NULL and socket is marked as SOCK_ZAPPED. Socket is killed if the condition is satisfied.

In the race condition, following occurs:
A::l2cap_chan_timeout()->l2cap_chan_close()->l2cap_sock_teardown_cb() B::l2cap_sock_release()->sock_orphan() B::l2cap_sock_release()->l2cap_sock_kill() A::l2cap_chan_timeout()->l2cap_sock_close_cb()->l2cap_sock_kill()

In this scenario, "if-statement" is true in both B::l2cap_sock_kill() and A::l2cap_sock_kill() and we hit "refcount: underflow; use-after-free" bug.

Similar condition occurs at other places where teardown/sock_kill is happening:
l2cap_disconnect_rsp()->l2cap_chan_del()->l2cap_sock_teardown_cb() l2cap_disconnect_rsp()->l2cap_sock_close_cb()->l2cap_sock_kill()

l2cap_conn_del()->l2cap_chan_del()->l2cap_sock_teardown_cb() l2cap_conn_del()->l2cap_sock_close_cb()->l2cap_sock_kill()

l2cap_disconnect_req()->l2cap_chan_del()->l2cap_sock_teardown_cb() l2cap_disconnect_req()->l2cap_sock_close_cb()->l2cap_sock_kill()

l2cap_sock_cleanup_listen()->l2cap_chan_close()->l2cap_sock_teardown_cb() l2cap_sock_cleanup_listen()->l2cap_sock_kill()

Protect teardown/sock_kill and orphan/sock_kill by adding hold_lock on l2cap channel to ensure that the socket is killed only after marked as zapped and orphan.

---
 net/bluetooth/l2cap_core.c | 26 +++++++++++++++-----------
 net/bluetooth/l2cap_sock.c | 16 +++++++++++++---
 2 files changed, 28 insertions(+), 14 deletions(-)
net/bluetooth/l2cap_core.c +15 -11
index ebdf1b0e576a5..97175cddb1e04 100644
@@ -414,6 +414,9 @@ static void l2cap_chan_timeout(struct work_struct *work)
 	BT_DBG("chan %p state %s", chan, state_to_string(chan->state));
 
 	mutex_lock(&conn->chan_lock);
+	/* __set_chan_timer() calls l2cap_chan_hold(chan) while scheduling
+	 * this work. No need to call l2cap_chan_hold(chan) here again.
+	 */
 	l2cap_chan_lock(chan);
 
 	if (chan->state == BT_CONNECTED || chan->state == BT_CONFIG)
@@ -426,12 +429,12 @@ static void l2cap_chan_timeout(struct work_struct *work)
 
 	l2cap_chan_close(chan, reason);
 
-	l2cap_chan_unlock(chan);
-
 	chan->ops->close(chan);
-	mutex_unlock(&conn->chan_lock);
 
+	l2cap_chan_unlock(chan);
 	l2cap_chan_put(chan);
+
+	mutex_unlock(&conn->chan_lock);
 }
 
 struct l2cap_chan *l2cap_chan_create(void)
@@ -1725,9 +1728,9 @@ static void l2cap_conn_del(struct hci_conn *hcon, int err)
 
 		l2cap_chan_del(chan, err);
 
-		l2cap_chan_unlock(chan);
-
 		chan->ops->close(chan);
+
+		l2cap_chan_unlock(chan);
 		l2cap_chan_put(chan);
 	}
 
@@ -4337,6 +4340,7 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn,
 		return 0;
 	}
 
+	l2cap_chan_hold(chan);
 	l2cap_chan_lock(chan);
 
 	rsp.dcid = cpu_to_le16(chan->scid);
@@ -4345,12 +4349,11 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn,
 
 	chan->ops->set_shutdown(chan);
 
-	l2cap_chan_hold(chan);
 	l2cap_chan_del(chan, ECONNRESET);
 
-	l2cap_chan_unlock(chan);
-
 	chan->ops->close(chan);
+
+	l2cap_chan_unlock(chan);
 	l2cap_chan_put(chan);
 
 	mutex_unlock(&conn->chan_lock);
@@ -4382,20 +4385,21 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn,
 		return 0;
 	}
 
+	l2cap_chan_hold(chan);
 	l2cap_chan_lock(chan);
 
 	if (chan->state != BT_DISCONN) {
 		l2cap_chan_unlock(chan);
+		l2cap_chan_put(chan);
 		mutex_unlock(&conn->chan_lock);
 		return 0;
 	}
 
-	l2cap_chan_hold(chan);
 	l2cap_chan_del(chan, 0);
 
-	l2cap_chan_unlock(chan);
-
 	chan->ops->close(chan);
+
+	l2cap_chan_unlock(chan);
 	l2cap_chan_put(chan);
 
 	mutex_unlock(&conn->chan_lock);
net/bluetooth/l2cap_sock.c +13 -3
index 8c329c549ea60..a5e618add17f4 100644
@@ -1040,7 +1040,7 @@ done:
 }
 
 /* Kill socket (only if zapped and orphan)
- * Must be called on unlocked socket.
+ * Must be called on unlocked socket, with l2cap channel lock.
  */
 static void l2cap_sock_kill(struct sock *sk)
 {
@@ -1201,8 +1201,15 @@ static int l2cap_sock_release(struct socket *sock)
 
 	err = l2cap_sock_shutdown(sock, 2);
 
+	l2cap_chan_hold(l2cap_pi(sk)->chan);
+	l2cap_chan_lock(l2cap_pi(sk)->chan);
+
 	sock_orphan(sk);
 	l2cap_sock_kill(sk);
+
+	l2cap_chan_unlock(l2cap_pi(sk)->chan);
+	l2cap_chan_put(l2cap_pi(sk)->chan);
+
 	return err;
 }
 
@@ -1220,12 +1227,15 @@ static void l2cap_sock_cleanup_listen(struct sock *parent)
 		BT_DBG("child chan %p state %s", chan,
 		       state_to_string(chan->state));
 
+		l2cap_chan_hold(chan);
 		l2cap_chan_lock(chan);
+
 		__clear_chan_timer(chan);
 		l2cap_chan_close(chan, ECONNRESET);
-		l2cap_chan_unlock(chan);
-
 		l2cap_sock_kill(sk);
+
+		l2cap_chan_unlock(chan);
+		l2cap_chan_put(chan);
 	}
 }
 
Signature · 1 line
2.25.1
author maintainer
#20 lore raw

PATCH 20/166 m68k: q40: Fix info-leak in rtc_ioctl

In reply to Greg Kroah-Hartman

From: Fuqian Huang <[email protected]>

[ Upstream commit 7cf78b6b12fd5550545e4b73b35dca18bd46b44c ]

When the option is RTC_PLL_GET, pll will be copied to userland via copy_to_user. pll is initialized using mach_get_rtc_pll indirect call and mach_get_rtc_pll is only assigned with function q40_get_rtc_pll in arch/m68k/q40/config.c.
In function q40_get_rtc_pll, the field pll_ctrl is not initialized. This will leak uninitialized stack content to userland. Fix this by zeroing the uninitialized field.

---
 arch/m68k/q40/config.c | 1 +
 1 file changed, 1 insertion(+)
arch/m68k/q40/config.c +1 -0
index 71c0867ecf20f..7fdf4e7799bcd 100644
@@ -303,6 +303,7 @@ static int q40_get_rtc_pll(struct rtc_pll_info *pll)
 {
 	int tmp = Q40_RTC_CTRL;
 
+	pll->pll_ctrl = 0;
 	pll->pll_value = tmp & Q40_RTC_PLL_MASK;
 	if (tmp & Q40_RTC_PLL_SIGN)
 		pll->pll_value = -pll->pll_value;
Signature · 1 line
2.25.1
author maintainer
#64 lore raw

PATCH 64/166 drm/omap: fix possible object reference leak

In reply to Greg Kroah-Hartman

From: Wen Yang <[email protected]>

[ Upstream commit 47340e46f34a3b1d80e40b43ae3d7a8da34a3541 ]

The call to of_find_matching_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage.

Detected by coccinelle with the following warnings:
drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:212:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function. drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:237:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function.

---
 drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c +3 -1
index bf626acae2712..cd8e9b799b9a5 100644
@@ -193,7 +193,7 @@ static int __init omapdss_boot_init(void)
 	dss = of_find_matching_node(NULL, omapdss_of_match);
 
 	if (dss == NULL || !of_device_is_available(dss))
-		return 0;
+		goto put_node;
 
 	omapdss_walk_device(dss, true);
 
@@ -218,6 +218,8 @@ static int __init omapdss_boot_init(void)
 		kfree(n);
 	}
 
+put_node:
+	of_node_put(dss);
 	return 0;
 }
 
Signature · 8 lines
2.25.1



_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#63 lore raw

PATCH 63/166 scsi: lpfc: Fix coverity errors in fmdi attribute handling

In reply to Greg Kroah-Hartman

From: James Smart <[email protected]>

[ Upstream commit 4cb9e1ddaa145be9ed67b6a7de98ca705a43f998 ]

Coverity reported a memory corruption error for the fdmi attributes routines:

CID 15768 [Memory Corruption] Out-of-bounds access on FDMI

Sloppy coding of the fmdi structures. In both the lpfc_fdmi_attr_def and lpfc_fdmi_reg_port_list structures, a field was placed at the start of payload that may have variable content. The field was given an arbitrary type (uint32_t). The code then uses the field name to derive an address, which it used in things such as memset and memcpy. The memset sizes or memcpy lengths were larger than the arbitrary type, thus coverity reported an error.

Fix by replacing the arbitrary fields with the real field structures describing the payload.

---
 drivers/scsi/lpfc/lpfc_ct.c | 137 ++++++++++++++++++------------------
 drivers/scsi/lpfc/lpfc_hw.h |  36 +++++-----
 2 files changed, 85 insertions(+), 88 deletions(-)
drivers/scsi/lpfc/lpfc_ct.c +69 -68
index 601a4ee60de85..e193fa5963d82 100644
@@ -1714,8 +1714,8 @@ lpfc_fdmi_hba_attr_wwnn(struct lpfc_vport *vport, struct lpfc_fdmi_attr_def *ad)
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fc_sparam.nodeName,
 	       sizeof(struct lpfc_name));
@@ -1731,8 +1731,8 @@ lpfc_fdmi_hba_attr_manufacturer(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	/* This string MUST be consistent with other FC platforms
 	 * supported by Broadcom.
@@ -1756,8 +1756,8 @@ lpfc_fdmi_hba_attr_sn(struct lpfc_vport *vport, struct lpfc_fdmi_attr_def *ad)
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->SerialNumber,
 		sizeof(ae->un.AttrString));
@@ -1778,8 +1778,8 @@ lpfc_fdmi_hba_attr_model(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->ModelName,
 		sizeof(ae->un.AttrString));
@@ -1799,8 +1799,8 @@ lpfc_fdmi_hba_attr_description(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->ModelDesc,
 		sizeof(ae->un.AttrString));
@@ -1822,8 +1822,8 @@ lpfc_fdmi_hba_attr_hdw_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t i, j, incr, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	/* Convert JEDEC ID to ascii for hardware version */
 	incr = vp->rev.biuRev;
@@ -1852,8 +1852,8 @@ lpfc_fdmi_hba_attr_drvr_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, lpfc_release_version,
 		sizeof(ae->un.AttrString));
@@ -1874,8 +1874,8 @@ lpfc_fdmi_hba_attr_rom_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	if (phba->sli_rev == LPFC_SLI_REV4)
 		lpfc_decode_firmware_rev(phba, ae->un.AttrString, 1);
@@ -1899,8 +1899,8 @@ lpfc_fdmi_hba_attr_fmw_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	lpfc_decode_firmware_rev(phba, ae->un.AttrString, 1);
 	len = strnlen(ae->un.AttrString,
@@ -1919,8 +1919,8 @@ lpfc_fdmi_hba_attr_os_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	snprintf(ae->un.AttrString, sizeof(ae->un.AttrString), "%s %s %s",
 		 init_utsname()->sysname,
@@ -1942,7 +1942,7 @@ lpfc_fdmi_hba_attr_ct_len(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	ae->un.AttrInt =  cpu_to_be32(LPFC_MAX_CT_SIZE);
 	size = FOURBYTES + sizeof(uint32_t);
@@ -1958,8 +1958,8 @@ lpfc_fdmi_hba_attr_symbolic_name(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	len = lpfc_vport_symbolic_node_name(vport,
 				ae->un.AttrString, 256);
@@ -1977,7 +1977,7 @@ lpfc_fdmi_hba_attr_vendor_info(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* Nothing is defined for this currently */
 	ae->un.AttrInt =  cpu_to_be32(0);
@@ -1994,7 +1994,7 @@ lpfc_fdmi_hba_attr_num_ports(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* Each driver instance corresponds to a single port */
 	ae->un.AttrInt =  cpu_to_be32(1);
@@ -2011,8 +2011,8 @@ lpfc_fdmi_hba_attr_fabric_wwnn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fabric_nodename,
 	       sizeof(struct lpfc_name));
@@ -2030,8 +2030,8 @@ lpfc_fdmi_hba_attr_bios_ver(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	lpfc_decode_firmware_rev(phba, ae->un.AttrString, 1);
 	len = strnlen(ae->un.AttrString,
@@ -2050,7 +2050,7 @@ lpfc_fdmi_hba_attr_bios_state(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* Driver doesn't have access to this information */
 	ae->un.AttrInt =  cpu_to_be32(0);
@@ -2067,8 +2067,8 @@ lpfc_fdmi_hba_attr_vendor_id(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, "EMULEX",
 		sizeof(ae->un.AttrString));
@@ -2089,8 +2089,8 @@ lpfc_fdmi_port_attr_fc4type(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 32);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	ae->un.AttrTypes[3] = 0x02; /* Type 0x1 - ELS */
 	ae->un.AttrTypes[2] = 0x01; /* Type 0x8 - FCP */
@@ -2111,7 +2111,7 @@ lpfc_fdmi_port_attr_support_speed(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	ae->un.AttrInt = 0;
 	if (!(phba->hba_flag & HBA_FCOE_MODE)) {
@@ -2161,7 +2161,7 @@ lpfc_fdmi_port_attr_speed(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	if (!(phba->hba_flag & HBA_FCOE_MODE)) {
 		switch (phba->fc_linkspeed) {
@@ -2225,7 +2225,7 @@ lpfc_fdmi_port_attr_max_frame(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	hsp = (struct serv_parm *)&vport->fc_sparam;
 	ae->un.AttrInt = (((uint32_t) hsp->cmn.bbRcvSizeMsb) << 8) |
@@ -2245,8 +2245,8 @@ lpfc_fdmi_port_attr_os_devname(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	snprintf(ae->un.AttrString, sizeof(ae->un.AttrString),
 		 "/sys/class/scsi_host/host%d", shost->host_no);
@@ -2266,8 +2266,8 @@ lpfc_fdmi_port_attr_host_name(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	snprintf(ae->un.AttrString, sizeof(ae->un.AttrString), "%s",
 		 init_utsname()->nodename);
@@ -2287,8 +2287,8 @@ lpfc_fdmi_port_attr_wwnn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0,  sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fc_sparam.nodeName,
 	       sizeof(struct lpfc_name));
@@ -2305,8 +2305,8 @@ lpfc_fdmi_port_attr_wwpn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0,  sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fc_sparam.portName,
 	       sizeof(struct lpfc_name));
@@ -2323,8 +2323,8 @@ lpfc_fdmi_port_attr_symbolic_name(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	len = lpfc_vport_symbolic_port_name(vport, ae->un.AttrString, 256);
 	len += (len & 3) ? (4 - (len & 3)) : 4;
@@ -2342,7 +2342,7 @@ lpfc_fdmi_port_attr_port_type(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	if (phba->fc_topology == LPFC_TOPOLOGY_LOOP)
 		ae->un.AttrInt =  cpu_to_be32(LPFC_FDMI_PORTTYPE_NLPORT);
 	else
@@ -2360,7 +2360,7 @@ lpfc_fdmi_port_attr_class(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt = cpu_to_be32(FC_COS_CLASS2 | FC_COS_CLASS3);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -2375,8 +2375,8 @@ lpfc_fdmi_port_attr_fabric_wwpn(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0,  sizeof(struct lpfc_name));
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrWWN, &vport->fabric_portname,
 	       sizeof(struct lpfc_name));
@@ -2393,8 +2393,8 @@ lpfc_fdmi_port_attr_active_fc4type(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 32);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	ae->un.AttrTypes[3] = 0x02; /* Type 0x1 - ELS */
 	ae->un.AttrTypes[2] = 0x01; /* Type 0x8 - FCP */
@@ -2414,7 +2414,7 @@ lpfc_fdmi_port_attr_port_state(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	/* Link Up - operational */
 	ae->un.AttrInt =  cpu_to_be32(LPFC_FDMI_PORTSTATE_ONLINE);
 	size = FOURBYTES + sizeof(uint32_t);
@@ -2430,7 +2430,7 @@ lpfc_fdmi_port_attr_num_disc(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	vport->fdmi_num_disc = lpfc_find_map_node(vport);
 	ae->un.AttrInt = cpu_to_be32(vport->fdmi_num_disc);
 	size = FOURBYTES + sizeof(uint32_t);
@@ -2446,7 +2446,7 @@ lpfc_fdmi_port_attr_nportid(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt =  cpu_to_be32(vport->fc_myDID);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -2461,8 +2461,8 @@ lpfc_fdmi_smart_attr_service(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, "Smart SAN Initiator",
 		sizeof(ae->un.AttrString));
@@ -2482,8 +2482,8 @@ lpfc_fdmi_smart_attr_guid(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	memcpy(&ae->un.AttrString, &vport->fc_sparam.nodeName,
 	       sizeof(struct lpfc_name));
@@ -2503,8 +2503,8 @@ lpfc_fdmi_smart_attr_version(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, "Smart SAN Version 2.0",
 		sizeof(ae->un.AttrString));
@@ -2525,8 +2525,8 @@ lpfc_fdmi_smart_attr_model(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t len, size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
-	memset(ae, 0, 256);
+	ae = &ad->AttrValue;
+	memset(ae, 0, sizeof(*ae));
 
 	strncpy(ae->un.AttrString, phba->ModelName,
 		sizeof(ae->un.AttrString));
@@ -2545,7 +2545,7 @@ lpfc_fdmi_smart_attr_port_info(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 
 	/* SRIOV (type 3) is not supported */
 	if (vport->vpi)
@@ -2565,7 +2565,7 @@ lpfc_fdmi_smart_attr_qos(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt =  cpu_to_be32(0);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -2580,7 +2580,7 @@ lpfc_fdmi_smart_attr_security(struct lpfc_vport *vport,
 	struct lpfc_fdmi_attr_entry *ae;
 	uint32_t size;
 
-	ae = (struct lpfc_fdmi_attr_entry *)&ad->AttrValue;
+	ae = &ad->AttrValue;
 	ae->un.AttrInt =  cpu_to_be32(1);
 	size = FOURBYTES + sizeof(uint32_t);
 	ad->AttrLen = cpu_to_be16(size);
@@ -2728,7 +2728,8 @@ lpfc_fdmi_cmd(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 			/* Registered Port List */
 			/* One entry (port) per adapter */
 			rh->rpl.EntryCnt = cpu_to_be32(1);
-			memcpy(&rh->rpl.pe, &phba->pport->fc_sparam.portName,
+			memcpy(&rh->rpl.pe.PortName,
+			       &phba->pport->fc_sparam.portName,
 			       sizeof(struct lpfc_name));
 
 			/* point to the HBA attribute block */
drivers/scsi/lpfc/lpfc_hw.h +16 -20
index bdc1f184f67a3..12e033bbe607a 100644
@@ -1326,25 +1326,8 @@ struct fc_rdp_res_frame {
 /* lpfc_sli_ct_request defines the CT_IU preamble for FDMI commands */
 #define  SLI_CT_FDMI_Subtypes     0x10	/* Management Service Subtype */
 
-/*
- * Registered Port List Format
- */
-struct lpfc_fdmi_reg_port_list {
-	uint32_t EntryCnt;
-	uint32_t pe;		/* Variable-length array */
-};
-
-
 /* Definitions for HBA / Port attribute entries */
 
-struct lpfc_fdmi_attr_def { /* Defined in TLV format */
-	/* Structure is in Big Endian format */
-	uint32_t AttrType:16;
-	uint32_t AttrLen:16;
-	uint32_t AttrValue;  /* Marks start of Value (ATTRIBUTE_ENTRY) */
-};
-
-
 /* Attribute Entry */
 struct lpfc_fdmi_attr_entry {
 	union {
@@ -1355,7 +1338,13 @@ struct lpfc_fdmi_attr_entry {
 	} un;
 };
 
-#define LPFC_FDMI_MAX_AE_SIZE	sizeof(struct lpfc_fdmi_attr_entry)
+struct lpfc_fdmi_attr_def { /* Defined in TLV format */
+	/* Structure is in Big Endian format */
+	uint32_t AttrType:16;
+	uint32_t AttrLen:16;
+	/* Marks start of Value (ATTRIBUTE_ENTRY) */
+	struct lpfc_fdmi_attr_entry AttrValue;
+} __packed;
 
 /*
  * HBA Attribute Block
@@ -1379,13 +1368,20 @@ struct lpfc_fdmi_hba_ident {
 	struct lpfc_name PortName;
 };
 
+/*
+ * Registered Port List Format
+ */
+struct lpfc_fdmi_reg_port_list {
+	uint32_t EntryCnt;
+	struct lpfc_fdmi_port_entry pe;
+} __packed;
+
 /*
  * Register HBA(RHBA)
  */
 struct lpfc_fdmi_reg_hba {
 	struct lpfc_fdmi_hba_ident hi;
-	struct lpfc_fdmi_reg_port_list rpl;	/* variable-length array */
-/* struct lpfc_fdmi_attr_block   ab; */
+	struct lpfc_fdmi_reg_port_list rpl;
 };
 
 /*
Signature · 1 line
2.25.1
author maintainer
#66 lore raw

PATCH 66/166 RDMA/rxe: Fix configuration of atomic queue pair attributes

In reply to Greg Kroah-Hartman

From: Bart Van Assche <[email protected]>

[ Upstream commit fb3063d31995cc4cf1d47a406bb61d6fb1b1d58d ]

Quoted 1 line

From the comment above the definition of the roundup_pow_of_two() macro:

     The result is undefined when n == 0.

Hence only pass positive values to roundup_pow_of_two(). This patch fixes the following UBSAN complaint:

  UBSAN: Undefined behaviour in ./include/linux/log2.h:57:13
  shift exponent 64 is too large for 64-bit type 'long unsigned int'
  Call Trace:
   dump_stack+0xa5/0xe6
   ubsan_epilogue+0x9/0x26
   __ubsan_handle_shift_out_of_bounds.cold+0x4c/0xf9
   rxe_qp_from_attr.cold+0x37/0x5d [rdma_rxe]
   rxe_modify_qp+0x59/0x70 [rdma_rxe]
   _ib_modify_qp+0x5aa/0x7c0 [ib_core]
   ib_modify_qp+0x3b/0x50 [ib_core]
   cma_modify_qp_rtr+0x234/0x260 [rdma_cm]
   __rdma_accept+0x1a7/0x650 [rdma_cm]
   nvmet_rdma_cm_handler+0x1286/0x14cd [nvmet_rdma]
   cma_cm_event_handler+0x6b/0x330 [rdma_cm]
   cma_ib_req_handler+0xe60/0x22d0 [rdma_cm]
   cm_process_work+0x30/0x140 [ib_cm]
   cm_req_handler+0x11f4/0x1cd0 [ib_cm]
   cm_work_handler+0xb8/0x344e [ib_cm]
   process_one_work+0x569/0xb60
   worker_thread+0x7a/0x5d0
   kthread+0x1e6/0x210
   ret_from_fork+0x24/0x30
---
 drivers/infiniband/sw/rxe/rxe_qp.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/infiniband/sw/rxe/rxe_qp.c +4 -3
index 25055a68a2c07..ef7fd5dfad468 100644
@@ -593,15 +593,16 @@ int rxe_qp_from_attr(struct rxe_qp *qp, struct ib_qp_attr *attr, int mask,
 	struct ib_gid_attr sgid_attr;
 
 	if (mask & IB_QP_MAX_QP_RD_ATOMIC) {
-		int max_rd_atomic = __roundup_pow_of_two(attr->max_rd_atomic);
+		int max_rd_atomic = attr->max_rd_atomic ?
+			roundup_pow_of_two(attr->max_rd_atomic) : 0;
 
 		qp->attr.max_rd_atomic = max_rd_atomic;
 		atomic_set(&qp->req.rd_atomic, max_rd_atomic);
 	}
 
 	if (mask & IB_QP_MAX_DEST_RD_ATOMIC) {
-		int max_dest_rd_atomic =
-			__roundup_pow_of_two(attr->max_dest_rd_atomic);
+		int max_dest_rd_atomic = attr->max_dest_rd_atomic ?
+			roundup_pow_of_two(attr->max_dest_rd_atomic) : 0;
 
 		qp->attr.max_dest_rd_atomic = max_dest_rd_atomic;
 
Signature · 1 line
2.25.1
author maintainer
#67 lore raw

PATCH 67/166 KVM: x86: fix incorrect comparison in trace event

In reply to Greg Kroah-Hartman

From: Paolo Bonzini <[email protected]>

[ Upstream commit 147f1a1fe5d7e6b01b8df4d0cbd6f9eaf6b6c73b ]

The "u" field in the event has three states, -1/0/1. Using u8 however means that comparison with -1 will always fail, so change to signed char.

---
 arch/x86/kvm/mmutrace.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kvm/mmutrace.h +1 -1
index 918b0d5bf2724..1c1c2649829ba 100644
@@ -339,7 +339,7 @@ TRACE_EVENT(
 		/* These depend on page entry type, so compute them now.  */
 		__field(bool, r)
 		__field(bool, x)
-		__field(u8, u)
+		__field(signed char, u)
 	),
 
 	TP_fast_assign(
Signature · 1 line
2.25.1
author maintainer
#65 lore raw

PATCH 65/166 perf test: Fix test trace+probe_vfs_getname.sh on s390

In reply to Greg Kroah-Hartman

From: Thomas Richter <[email protected]>

[ Upstream commit 2bbc83537614517730e9f2811195004b712de207 ]

This test places a kprobe to function getname_flags() in the kernel which has the following prototype:

struct filename *getname_flags(const char __user *filename, int flags, int *empty)

The 'filename' argument points to a filename located in user space memory.

Looking at commit 88903c464321c ("tracing/probe: Add ustring type for user-space string") the kprobe should indicate that user space memory is accessed.

Output before:

[root@m35lp76 perf]# ./perf test 66 67
66: Use vfs_getname probe to get syscall args filenames : FAILED!
67: Check open filename arg using perf trace + vfs_getname: FAILED! [root@m35lp76 perf]#

Output after:

[root@m35lp76 perf]# ./perf test 66 67
66: Use vfs_getname probe to get syscall args filenames : Ok
67: Check open filename arg using perf trace + vfs_getname: Ok [root@m35lp76 perf]#

Comments from Masami Hiramatsu:

This bug doesn't happen on x86 or other archs on which user address space and kernel address space is the same. On some arches (ppc64 in this case?) user address space is partially or completely the same as kernel address space.

(Yes, they switch the world when running into the kernel) In this case, we need to use different data access functions for each space.

That is why I introduced the "ustring" type for kprobe events.

As far as I can see, Thomas's patch is sane. Thomas, could you show us your result on your test environment?

Comments from Thomas Richter:

Test results for s/390 included above.

---
 tools/perf/tests/shell/lib/probe_vfs_getname.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/tests/shell/lib/probe_vfs_getname.sh +1 -1
index 068d463e5cbfc..4b0922a209701 100644
@@ -14,7 +14,7 @@ add_probe_vfs_getname() {
 	if [ $had_vfs_getname -eq 1 ] ; then
 		line=$(perf probe -L getname_flags 2>&1 | egrep 'result.*=.*filename;' | sed -r 's/[[:space:]]+([[:digit:]]+)[[:space:]]+result->uptr.*/\1/')
 		perf probe -q       "vfs_getname=getname_flags:${line} pathname=result->name:string" || \
-		perf probe $verbose "vfs_getname=getname_flags:${line} pathname=filename:string"
+		perf probe $verbose "vfs_getname=getname_flags:${line} pathname=filename:ustring"
 	fi
 }
 
Signature · 1 line
2.25.1
author maintainer
#55 lore raw

PATCH 55/166 mm: pagewalk: fix termination condition in walk_pte_range()

In reply to Greg Kroah-Hartman

From: Steven Price <[email protected]>

[ Upstream commit c02a98753e0a36ba65a05818626fa6adeb4e7c97 ]

If walk_pte_range() is called with a 'end' argument that is beyond the last page of memory (e.g. ~0UL) then the comparison between 'addr' and 'end' will always fail and the loop will be infinite. Instead change the comparison to >= while accounting for overflow.

Cc Albert Ou <[email protected]>
Cc Alexandre Ghiti <[email protected]>
Cc Andy Lutomirski <[email protected]>
Cc Ard Biesheuvel <[email protected]>
Cc Arnd Bergmann <[email protected]>
Cc Benjamin Herrenschmidt <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Catalin Marinas <[email protected]>
Cc Christian Borntraeger <[email protected]>
Cc Dave Hansen <[email protected]>
Cc David S. Miller <[email protected]>
Cc Heiko Carstens <[email protected]>
Cc "H. Peter Anvin" <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc James Hogan <[email protected]>
Cc James Morse <[email protected]>
Cc Jerome Glisse <[email protected]>
Cc "Liang, Kan" <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Michael Ellerman <[email protected]>
Cc Paul Burton <[email protected]>
Cc Paul Mackerras <[email protected]>
Cc Paul Walmsley <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Ralf Baechle <[email protected]>
Cc Russell King <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Vasily Gorbik <[email protected]>
Cc Vineet Gupta <[email protected]>
Cc Will Deacon <[email protected]>
Cc Zong Li <[email protected]>
---
 mm/pagewalk.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
mm/pagewalk.c +2 -2
index 23a3e415ac2ce..84bdb2bac3dc6 100644
@@ -15,9 +15,9 @@ static int walk_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
 		err = walk->pte_entry(pte, addr, addr + PAGE_SIZE, walk);
 		if (err)
 		       break;
-		addr += PAGE_SIZE;
-		if (addr == end)
+		if (addr >= end - PAGE_SIZE)
 			break;
+		addr += PAGE_SIZE;
 		pte++;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#73 lore raw

PATCH 73/166 Bluetooth: guard against controllers sending zerod events

In reply to Greg Kroah-Hartman

From: Alain Michaud <[email protected]>

[ Upstream commit 08bb4da90150e2a225f35e0f642cdc463958d696 ]

Some controllers have been observed to send zero'd events under some conditions. This change guards against this condition as well as adding a trace to facilitate diagnosability of this condition.

---
 net/bluetooth/hci_event.c | 6 ++++++
 1 file changed, 6 insertions(+)
net/bluetooth/hci_event.c +6 -0
index 70b8e2de40cf4..1d2f439043669 100644
@@ -5257,6 +5257,11 @@ void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb)
 	u8 status = 0, event = hdr->evt, req_evt = 0;
 	u16 opcode = HCI_OP_NOP;
 
+	if (!event) {
+		bt_dev_warn(hdev, "Received unexpected HCI Event 00000000");
+		goto done;
+	}
+
 	if (hdev->sent_cmd && bt_cb(hdev->sent_cmd)->hci.req_event == event) {
 		struct hci_command_hdr *cmd_hdr = (void *) hdev->sent_cmd->data;
 		opcode = __le16_to_cpu(cmd_hdr->opcode);
@@ -5468,6 +5473,7 @@ void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb)
 		req_complete_skb(hdev, status, opcode, orig_skb);
 	}
 
+done:
 	kfree_skb(orig_skb);
 	kfree_skb(skb);
 	hdev->stat.evt_rx++;
Signature · 1 line
2.25.1
author maintainer
#75 lore raw

PATCH 75/166 ext4: fix a data race at inode->i_disksize

In reply to Greg Kroah-Hartman

From: Qiujun Huang <[email protected]>

[ Upstream commit dce8e237100f60c28cc66effb526ba65a01d8cb3 ]

KCSAN find inode->i_disksize could be accessed concurrently.

BUG: KCSAN: data-race in ext4_mark_iloc_dirty / ext4_write_end

write (marked) to 0xffff8b8932f40090 of 8 bytes by task 66792 on cpu 0:

 ext4_write_end+0x53f/0x5b0
 ext4_da_write_end+0x237/0x510
 generic_perform_write+0x1c4/0x2a0
 ext4_buffered_write_iter+0x13a/0x210
 ext4_file_write_iter+0xe2/0x9b0
 new_sync_write+0x29c/0x3a0
 __vfs_write+0x92/0xa0
 vfs_write+0xfc/0x2a0
 ksys_write+0xe8/0x140
 __x64_sys_write+0x4c/0x60
 do_syscall_64+0x8a/0x2a0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

read to 0xffff8b8932f40090 of 8 bytes by task 14414 on cpu 1:

 ext4_mark_iloc_dirty+0x716/0x1190
 ext4_mark_inode_dirty+0xc9/0x360
 ext4_convert_unwritten_extents+0x1bc/0x2a0
 ext4_convert_unwritten_io_end_vec+0xc5/0x150
 ext4_put_io_end+0x82/0x130
 ext4_writepages+0xae7/0x16f0
 do_writepages+0x64/0x120
 __writeback_single_inode+0x7d/0x650
 writeback_sb_inodes+0x3a4/0x860
 __writeback_inodes_wb+0xc4/0x150
 wb_writeback+0x43f/0x510
 wb_workfn+0x3b2/0x8a0
 process_one_work+0x39b/0x7e0
 worker_thread+0x88/0x650
 kthread+0x1d4/0x1f0
 ret_from_fork+0x35/0x40

The plain read is outside of inode->i_data_sem critical section which results in a data race. Fix it by adding READ_ONCE().

---
 fs/ext4/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/ext4/inode.c +1 -1
index 845b8620afcf6..34da8d341c0c4 100644
@@ -5179,7 +5179,7 @@ static int ext4_do_update_inode(handle_t *handle,
 		raw_inode->i_file_acl_high =
 			cpu_to_le16(ei->i_file_acl >> 32);
 	raw_inode->i_file_acl_lo = cpu_to_le32(ei->i_file_acl);
-	if (ei->i_disksize != ext4_isize(inode->i_sb, raw_inode)) {
+	if (READ_ONCE(ei->i_disksize) != ext4_isize(inode->i_sb, raw_inode)) {
 		ext4_isize_set(raw_inode, ei->i_disksize);
 		need_datasync = 1;
 	}
Signature · 1 line
2.25.1
author maintainer
#74 lore raw

PATCH 74/166 timekeeping: Prevent 32bit truncation in scale64_check_overflow()

In reply to Greg Kroah-Hartman

From: Wen Yang <[email protected]>

[ Upstream commit 4cbbc3a0eeed675449b1a4d080008927121f3da3 ]

While unlikely the divisor in scale64_check_overflow() could be >= 32bit in scale64_check_overflow(). do_div() truncates the divisor to 32bit at least on 32bit platforms.

Use div64_u64() instead to avoid the truncation to 32-bit.

[ tglx: Massaged changelog ]

---
 kernel/time/timekeeping.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
kernel/time/timekeeping.c +1 -2
index 1ce7c404d0b03..5b6f815a74ee3 100644
@@ -988,9 +988,8 @@ static int scale64_check_overflow(u64 mult, u64 div, u64 *base)
 	    ((int)sizeof(u64)*8 - fls64(mult) < fls64(rem)))
 		return -EOVERFLOW;
 	tmp *= mult;
-	rem *= mult;
 
-	do_div(rem, div);
+	rem = div64_u64(rem * mult, div);
 	*base = tmp + rem;
 	return 0;
 }
Signature · 1 line
2.25.1
author maintainer
#77 lore raw

PATCH 77/166 drm/amdgpu: increase atombios cmd timeout

In reply to Greg Kroah-Hartman

From: John Clements <[email protected]>

[ Upstream commit 1b3460a8b19688ad3033b75237d40fa580a5a953 ]

mitigates race condition on BACO reset between GPU bootcode and driver reload

---
 drivers/gpu/drm/amd/amdgpu/atom.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/amdgpu/atom.c +2 -2
index d69aa2e179bbe..e4874cc209ef4 100644
@@ -742,8 +742,8 @@ static void atom_op_jump(atom_exec_context *ctx, int *ptr, int arg)
 			cjiffies = jiffies;
 			if (time_after(cjiffies, ctx->last_jump_jiffies)) {
 				cjiffies -= ctx->last_jump_jiffies;
-				if ((jiffies_to_msecs(cjiffies) > 5000)) {
-					DRM_ERROR("atombios stuck in loop for more than 5secs aborting\n");
+				if ((jiffies_to_msecs(cjiffies) > 10000)) {
+					DRM_ERROR("atombios stuck in loop for more than 10secs aborting\n");
 					ctx->abort = true;
 				}
 			} else {
Signature · 1 line
2.25.1
author maintainer
#76 lore raw

PATCH 76/166 mm: avoid data corruption on CoW fault into PFN-mapped VMA

In reply to Greg Kroah-Hartman

From: Kirill A. Shutemov <[email protected]>

[ Upstream commit c3e5ea6ee574ae5e845a40ac8198de1fb63bb3ab ]

Jeff Moyer has reported that one of xfstests triggers a warning when run on DAX-enabled filesystem:

	WARNING: CPU: 76 PID: 51024 at mm/memory.c:2317 wp_page_copy+0xc40/0xd50
	...
	wp_page_copy+0x98c/0xd50 (unreliable)
	do_wp_page+0xd8/0xad0
	__handle_mm_fault+0x748/0x1b90
	handle_mm_fault+0x120/0x1f0
	__do_page_fault+0x240/0xd70
	do_page_fault+0x38/0xd0
	handle_page_fault+0x10/0x30

The warning happens on failed __copy_from_user_inatomic() which tries to copy data into a CoW page.

This happens because of race between MADV_DONTNEED and CoW page fault:

	CPU0					CPU1
 handle_mm_fault()
   do_wp_page()
     wp_page_copy()
       do_wp_page()
					madvise(MADV_DONTNEED)
					  zap_page_range()
					    zap_pte_range()
					      ptep_get_and_clear_full()
					      <TLB flush>
	 __copy_from_user_inatomic()
	 sees empty PTE and fails
	 WARN_ON_ONCE(1)
	 clear_page()

The solution is to re-try __copy_from_user_inatomic() under PTL after checking that PTE is matches the orig_pte.

The second copy attempt can still fail, like due to non-readable PTE, but there's nothing reasonable we can do about, except clearing the CoW page.

---
 mm/memory.c | 35 +++++++++++++++++++++++++++--------
 1 file changed, 27 insertions(+), 8 deletions(-)
mm/memory.c +27 -8
index 07188929a30a1..caefa5526b20c 100644
@@ -2342,7 +2342,7 @@ static inline bool cow_user_page(struct page *dst, struct page *src,
 	bool ret;
 	void *kaddr;
 	void __user *uaddr;
-	bool force_mkyoung;
+	bool locked = false;
 	struct vm_area_struct *vma = vmf->vma;
 	struct mm_struct *mm = vma->vm_mm;
 	unsigned long addr = vmf->address;
@@ -2367,11 +2367,11 @@ static inline bool cow_user_page(struct page *dst, struct page *src,
 	 * On architectures with software "accessed" bits, we would
 	 * take a double page fault, so mark it accessed here.
 	 */
-	force_mkyoung = arch_faults_on_old_pte() && !pte_young(vmf->orig_pte);
-	if (force_mkyoung) {
+	if (arch_faults_on_old_pte() && !pte_young(vmf->orig_pte)) {
 		pte_t entry;
 
 		vmf->pte = pte_offset_map_lock(mm, vmf->pmd, addr, &vmf->ptl);
+		locked = true;
 		if (!likely(pte_same(*vmf->pte, vmf->orig_pte))) {
 			/*
 			 * Other thread has already handled the fault
@@ -2395,18 +2395,37 @@ static inline bool cow_user_page(struct page *dst, struct page *src,
 	 * zeroes.
 	 */
 	if (__copy_from_user_inatomic(kaddr, uaddr, PAGE_SIZE)) {
+		if (locked)
+			goto warn;
+
+		/* Re-validate under PTL if the page is still mapped */
+		vmf->pte = pte_offset_map_lock(mm, vmf->pmd, addr, &vmf->ptl);
+		locked = true;
+		if (!likely(pte_same(*vmf->pte, vmf->orig_pte))) {
+			/* The PTE changed under us. Retry page fault. */
+			ret = false;
+			goto pte_unlock;
+		}
+
 		/*
-		 * Give a warn in case there can be some obscure
-		 * use-case
+		 * The same page can be mapped back since last copy attampt.
+		 * Try to copy again under PTL.
 		 */
-		WARN_ON_ONCE(1);
-		clear_page(kaddr);
+		if (__copy_from_user_inatomic(kaddr, uaddr, PAGE_SIZE)) {
+			/*
+			 * Give a warn in case there can be some obscure
+			 * use-case
+			 */
+warn:
+			WARN_ON_ONCE(1);
+			clear_page(kaddr);
+		}
 	}
 
 	ret = true;
 
 pte_unlock:
-	if (force_mkyoung)
+	if (locked)
 		pte_unmap_unlock(vmf->pte, vmf->ptl);
 	kunmap_atomic(kaddr);
 	flush_dcache_page(dst);
Signature · 1 line
2.25.1
author maintainer
#80 lore raw

PATCH 80/166 Bluetooth: L2CAP: handle l2cap config request during open state

In reply to Greg Kroah-Hartman

From: Howard Chung <[email protected]>

[ Upstream commit 96298f640104e4cd9a913a6e50b0b981829b94ff ]

According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state.

The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change.

=== Before ===
...

Quoted 1 line

ACL Data RX: Handle 256 flags 0x02 dlen 12 #22

      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16                #23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12                #24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5 #25

Num handles: 1
Handle: 256
Count: 1

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5 #26

Num handles: 1
Handle: 256
Count: 1

Quoted 1 line

ACL Data RX: Handle 256 flags 0x02 dlen 16 #27

      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18                #28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5 #29

Num handles: 1
Handle: 256
Count: 1

Quoted 1 line

ACL Data RX: Handle 256 flags 0x02 dlen 14 #30

      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
Quoted 1 line

ACL Data RX: Handle 256 flags 0x02 dlen 20 #31

      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                ......

< ACL Data TX: Handle 256 flags 0x00 dlen 14 #32
L2CAP: Command Reject (0x01) ident 3 len 6
Reason: Invalid CID in request (0x0002) Destination CID: 64
Source CID: 65

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5 #33

Num handles: 1
Handle: 256
Count: 1
...
=== After ===
...

Quoted 1 line

ACL Data RX: Handle 256 flags 0x02 dlen 12 #22

      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16               #23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12               #24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5 #25

Num handles: 1
Handle: 256
Count: 1

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5 #26

Num handles: 1
Handle: 256
Count: 1

Quoted 1 line

ACL Data RX: Handle 256 flags 0x02 dlen 16 #27

      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18               #28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5 #29

Num handles: 1
Handle: 256
Count: 1

Quoted 1 line

ACL Data RX: Handle 256 flags 0x02 dlen 14 #30

      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
Quoted 1 line

ACL Data RX: Handle 256 flags 0x02 dlen 20 #31

      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                .....
< ACL Data TX: Handle 256 flags 0x00 dlen 18               #32
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
< ACL Data TX: Handle 256 flags 0x00 dlen 12               #33
      L2CAP: Configure Request (0x04) ident 3 len 4
        Destination CID: 65
        Flags: 0x0000
Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5 #34

Num handles: 1
Handle: 256
Count: 1

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5 #35

Num handles: 1
Handle: 256
Count: 1
...

---
 net/bluetooth/l2cap_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/bluetooth/l2cap_core.c +2 -1
index 97175cddb1e04..c301b9debea7c 100644
@@ -4117,7 +4117,8 @@ static inline int l2cap_config_req(struct l2cap_conn *conn,
 		return 0;
 	}
 
-	if (chan->state != BT_CONFIG && chan->state != BT_CONNECT2) {
+	if (chan->state != BT_CONFIG && chan->state != BT_CONNECT2 &&
+	    chan->state != BT_CONNECTED) {
 		cmd_reject_invalid_cid(conn, cmd->ident, chan->scid,
 				       chan->dcid);
 		goto unlock;
Signature · 1 line
2.25.1
author maintainer
#79 lore raw

PATCH 79/166 scsi: aacraid: Disabling TM path and only processing IOP reset

In reply to Greg Kroah-Hartman

From: Sagar Biradar <[email protected]>

[ Upstream commit bef18d308a2215eff8c3411a23d7f34604ce56c3 ]

Fixes the occasional adapter panic when sg_reset is issued with -d, -t, -b and -H flags. Removal of command type HBA_IU_TYPE_SCSI_TM_REQ in aac_hba_send since iu_type, request_id and fib_flags are not populated. Device and target reset handlers are made to send TMF commands only when reset_state is 0.

---
 drivers/scsi/aacraid/commsup.c |  2 +-
 drivers/scsi/aacraid/linit.c   | 34 +++++++++++++++++++++++++---------
 2 files changed, 26 insertions(+), 10 deletions(-)
drivers/scsi/aacraid/commsup.c +1 -1
index a284527999c55..65a5cd6a5f961 100644
@@ -771,7 +771,7 @@ int aac_hba_send(u8 command, struct fib *fibptr, fib_callback callback,
 		hbacmd->request_id =
 			cpu_to_le32((((u32)(fibptr - dev->fibs)) << 2) + 1);
 		fibptr->flags |= FIB_CONTEXT_FLAG_SCSI_CMD;
-	} else if (command != HBA_IU_TYPE_SCSI_TM_REQ)
+	} else
 		return -EINVAL;
 
 
drivers/scsi/aacraid/linit.c +25 -9
index 053a31c5485f3..e0e728d0dd5e7 100644
@@ -736,7 +736,11 @@ static int aac_eh_abort(struct scsi_cmnd* cmd)
 		status = aac_hba_send(HBA_IU_TYPE_SCSI_TM_REQ, fib,
 				  (fib_callback) aac_hba_callback,
 				  (void *) cmd);
-
+		if (status != -EINPROGRESS) {
+			aac_fib_complete(fib);
+			aac_fib_free(fib);
+			return ret;
+		}
 		/* Wait up to 15 secs for completion */
 		for (count = 0; count < 15; ++count) {
 			if (cmd->SCp.sent_command) {
@@ -915,11 +919,11 @@ static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
 
 	info = &aac->hba_map[bus][cid];
 
-	if (info->devtype != AAC_DEVTYPE_NATIVE_RAW &&
-	    info->reset_state > 0)
+	if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW &&
+	 !(info->reset_state > 0)))
 		return FAILED;
 
-	pr_err("%s: Host adapter reset request. SCSI hang ?\n",
+	pr_err("%s: Host device reset request. SCSI hang ?\n",
 	       AAC_DRIVERNAME);
 
 	fib = aac_fib_alloc(aac);
@@ -934,7 +938,12 @@ static int aac_eh_dev_reset(struct scsi_cmnd *cmd)
 	status = aac_hba_send(command, fib,
 			      (fib_callback) aac_tmf_callback,
 			      (void *) info);
-
+	if (status != -EINPROGRESS) {
+		info->reset_state = 0;
+		aac_fib_complete(fib);
+		aac_fib_free(fib);
+		return ret;
+	}
 	/* Wait up to 15 seconds for completion */
 	for (count = 0; count < 15; ++count) {
 		if (info->reset_state == 0) {
@@ -973,11 +982,11 @@ static int aac_eh_target_reset(struct scsi_cmnd *cmd)
 
 	info = &aac->hba_map[bus][cid];
 
-	if (info->devtype != AAC_DEVTYPE_NATIVE_RAW &&
-	    info->reset_state > 0)
+	if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW &&
+	 !(info->reset_state > 0)))
 		return FAILED;
 
-	pr_err("%s: Host adapter reset request. SCSI hang ?\n",
+	pr_err("%s: Host target reset request. SCSI hang ?\n",
 	       AAC_DRIVERNAME);
 
 	fib = aac_fib_alloc(aac);
@@ -994,6 +1003,13 @@ static int aac_eh_target_reset(struct scsi_cmnd *cmd)
 			      (fib_callback) aac_tmf_callback,
 			      (void *) info);
 
+	if (status != -EINPROGRESS) {
+		info->reset_state = 0;
+		aac_fib_complete(fib);
+		aac_fib_free(fib);
+		return ret;
+	}
+
 	/* Wait up to 15 seconds for completion */
 	for (count = 0; count < 15; ++count) {
 		if (info->reset_state <= 0) {
@@ -1046,7 +1062,7 @@ static int aac_eh_bus_reset(struct scsi_cmnd* cmd)
 		}
 	}
 
-	pr_err("%s: Host adapter reset request. SCSI hang ?\n", AAC_DRIVERNAME);
+	pr_err("%s: Host bus reset request. SCSI hang ?\n", AAC_DRIVERNAME);
 
 	/*
 	 * Check the health of the controller
Signature · 1 line
2.25.1
author maintainer
#82 lore raw

PATCH 82/166 xfs: dont ever return a stale pointer from __xfs_dir3_free_read

In reply to Greg Kroah-Hartman

From: Darrick J. Wong <[email protected]>

[ Upstream commit 1cb5deb5bc095c070c09a4540c45f9c9ba24be43 ]

If we decide that a directory free block is corrupt, we must take care not to leak a buffer pointer to the caller. After xfs_trans_brelse returns, the buffer can be freed or reused, which means that we have to set *bpp back to NULL.

Callers are supposed to notice the nonzero return value and not use the buffer pointer, but we should code more defensively, even if all current callers handle this situation correctly.

Fixes de14c5f541e7 ("xfs: verify free block header fields")
---
 fs/xfs/libxfs/xfs_dir2_node.c | 1 +
 1 file changed, 1 insertion(+)
fs/xfs/libxfs/xfs_dir2_node.c +1 -0
index 682e2bf370c72..ee4ebc2dd7492 100644
@@ -212,6 +212,7 @@ __xfs_dir3_free_read(
 		xfs_buf_ioerror(*bpp, -EFSCORRUPTED);
 		xfs_verifier_error(*bpp);
 		xfs_trans_brelse(tp, *bpp);
+		*bpp = NULL;
 		return -EFSCORRUPTED;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#81 lore raw

PATCH 81/166 media: tda10071: fix unsigned sign extension overflow

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit a7463e2dc698075132de9905b89f495df888bb79 ]

The shifting of buf[3] by 24 bits to the left will be promoted to a 32 bit signed int and then sign-extended to an unsigned long. In the unlikely event that the the top bit of buf[3] is set then all then all the upper bits end up as also being set because of the sign-extension and this affect the ev->post_bit_error sum. Fix this by using the temporary u32 variable bit_error to avoid the sign-extension promotion. This also removes the need to do the computation twice.

Addresses-Coverity: ("Unintended sign extension")

Fixes 267897a4708f ("[media] tda10071: implement DVBv5 statistics")
---
 drivers/media/dvb-frontends/tda10071.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/media/dvb-frontends/tda10071.c +5 -4
index a59f4fd09df60..27466b0d0be86 100644
@@ -483,10 +483,11 @@ static int tda10071_read_status(struct dvb_frontend *fe, enum fe_status *status)
 			goto error;
 
 		if (dev->delivery_system == SYS_DVBS) {
-			dev->dvbv3_ber = buf[0] << 24 | buf[1] << 16 |
-					 buf[2] << 8 | buf[3] << 0;
-			dev->post_bit_error += buf[0] << 24 | buf[1] << 16 |
-					       buf[2] << 8 | buf[3] << 0;
+			u32 bit_error = buf[0] << 24 | buf[1] << 16 |
+					buf[2] << 8 | buf[3] << 0;
+
+			dev->dvbv3_ber = bit_error;
+			dev->post_bit_error += bit_error;
 			c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
 			c->post_bit_error.stat[0].uvalue = dev->post_bit_error;
 			dev->block_error += buf[4] << 8 | buf[5] << 0;
Signature · 1 line
2.25.1
author maintainer
#72 lore raw

PATCH 72/166 media: go7007: Fix URB type for interrupt handling

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit a3ea410cac41b19a5490aad7fe6d9a9a772e646e ]

Josef reported that his old-and-good Plextor ConvertX M402U video converter spews lots of WARNINGs on the recent kernels, and it turned out that the device uses a bulk endpoint for interrupt handling just like 2250 board.

For fixing it, generalize the check with the proper verification of the endpoint instead of hard-coded board type check.

Fixes 7e5219d18e93 ("[media] go7007: Fix 2250 urb type")
---
 drivers/media/usb/go7007/go7007-usb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/media/usb/go7007/go7007-usb.c +3 -1
index ed9bcaf08d5ec..ddfaabd4c0813 100644
@@ -1052,6 +1052,7 @@ static int go7007_usb_probe(struct usb_interface *intf,
 	struct go7007_usb *usb;
 	const struct go7007_usb_board *board;
 	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct usb_host_endpoint *ep;
 	unsigned num_i2c_devs;
 	char *name;
 	int video_pipe, i, v_urb_len;
@@ -1147,7 +1148,8 @@ static int go7007_usb_probe(struct usb_interface *intf,
 	if (usb->intr_urb->transfer_buffer == NULL)
 		goto allocfail;
 
-	if (go->board_id == GO7007_BOARDID_SENSORAY_2250)
+	ep = usb->usbdev->ep_in[4];
+	if (usb_endpoint_type(&ep->desc) == USB_ENDPOINT_XFER_BULK)
 		usb_fill_bulk_urb(usb->intr_urb, usb->usbdev,
 			usb_rcvbulkpipe(usb->usbdev, 4),
 			usb->intr_urb->transfer_buffer, 2*sizeof(u16),
Signature · 1 line
2.25.1
author maintainer
#78 lore raw

PATCH 78/166 ath10k: use kzalloc to read for ath10k_sdio_hif_diag_read

In reply to Greg Kroah-Hartman

From: Wen Gong <[email protected]>

[ Upstream commit 402f2992b4d62760cce7c689ff216ea3bf4d6e8a ]

When use command to read values, it crashed.

command:
dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value count=1 bs=4 skip=$((0x100233))

It will call to ath10k_sdio_hif_diag_read with address = 0x4008cc and buf_len = 4.

Then system crash:

[ 1786.013258] Unable to handle kernel paging request at virtual address ffffffc00bd45000
[ 1786.013273] Mem abort info:
[ 1786.013281]   ESR = 0x96000045
[ 1786.013291]   Exception class = DABT (current EL), IL = 32 bits
[ 1786.013299]   SET = 0, FnV = 0
[ 1786.013307]   EA = 0, S1PTW = 0
[ 1786.013314] Data abort info:
[ 1786.013322]   ISV = 0, ISS = 0x00000045
[ 1786.013330]   CM = 0, WnR = 1
[ 1786.013342] swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000008542a60e
[ 1786.013350] [ffffffc00bd45000] pgd=0000000000000000, pud=0000000000000000
[ 1786.013368] Internal error: Oops: 96000045 [#1] PREEMPT SMP
[ 1786.013609] Process swapper/0 (pid: 0, stack limit = 0x0000000084b153c6)
[ 1786.013623] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.86 #137
[ 1786.013631] Hardware name: MediaTek krane sku176 board (DT)
[ 1786.013643] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[ 1786.013662] pc : __memcpy+0x94/0x180
[ 1786.013678] lr : swiotlb_tbl_unmap_single+0x84/0x150
[ 1786.013686] sp : ffffff8008003c60
[ 1786.013694] x29: ffffff8008003c90 x28: ffffffae96411f80
[ 1786.013708] x27: ffffffae960d2018 x26: ffffff8019a4b9a8
[ 1786.013721] x25: 0000000000000000 x24: 0000000000000001
[ 1786.013734] x23: ffffffae96567000 x22: 00000000000051d4
[ 1786.013747] x21: 0000000000000000 x20: 00000000fe6e9000
[ 1786.013760] x19: 0000000000000004 x18: 0000000000000020
[ 1786.013773] x17: 0000000000000001 x16: 0000000000000000
[ 1786.013787] x15: 00000000ffffffff x14: 00000000000044c0
[ 1786.013800] x13: 0000000000365ba4 x12: 0000000000000000
[ 1786.013813] x11: 0000000000000001 x10: 00000037be6e9000
[ 1786.013826] x9 : ffffffc940000000 x8 : 000000000bd45000
[ 1786.013839] x7 : 0000000000000000 x6 : ffffffc00bd45000
[ 1786.013852] x5 : 0000000000000000 x4 : 0000000000000000
[ 1786.013865] x3 : 0000000000000c00 x2 : 0000000000000004
[ 1786.013878] x1 : fffffff7be6e9004 x0 : ffffffc00bd45000
[ 1786.013891] Call trace:
[ 1786.013903]  __memcpy+0x94/0x180
[ 1786.013914]  unmap_single+0x6c/0x84
[ 1786.013925]  swiotlb_unmap_sg_attrs+0x54/0x80
[ 1786.013938]  __swiotlb_unmap_sg_attrs+0x8c/0xa4
[ 1786.013952]  msdc_unprepare_data+0x6c/0x84
[ 1786.013963]  msdc_request_done+0x58/0x84
[ 1786.013974]  msdc_data_xfer_done+0x1a0/0x1c8
[ 1786.013985]  msdc_irq+0x12c/0x17c
[ 1786.013996]  __handle_irq_event_percpu+0xe4/0x250
[ 1786.014006]  handle_irq_event_percpu+0x28/0x68
[ 1786.014015]  handle_irq_event+0x48/0x78
[ 1786.014026]  handle_fasteoi_irq+0xd0/0x1a0
[ 1786.014039]  __handle_domain_irq+0x84/0xc4
[ 1786.014050]  gic_handle_irq+0x124/0x1a4
[ 1786.014059]  el1_irq+0xb0/0x128
[ 1786.014072]  cpuidle_enter_state+0x298/0x328
[ 1786.014082]  cpuidle_enter+0x30/0x40
[ 1786.014094]  do_idle+0x190/0x268
[ 1786.014104]  cpu_startup_entry+0x24/0x28
[ 1786.014116]  rest_init+0xd4/0xe0
[ 1786.014126]  start_kernel+0x30c/0x38c
[ 1786.014139] Code: f8408423 f80084c3 36100062 b8404423 (b80044c3)
[ 1786.014150] ---[ end trace 3b02ddb698ea69ee ]---
[ 1786.015415] Kernel panic - not syncing: Fatal exception in interrupt
[ 1786.015433] SMP: stopping secondary CPUs
[ 1786.015447] Kernel Offset: 0x2e8d200000 from 0xffffff8008000000
[ 1786.015458] CPU features: 0x0,2188200c
[ 1786.015466] Memory Limit: none

For sdio chip, it need the memory which is kmalloc, if it is vmalloc from ath10k_mem_value_read, then it have a memory error. kzalloc of ath10k_sdio_hif_diag_read32 is the correct type, so add kzalloc in ath10k_sdio_hif_diag_read to replace the buffer which is vmalloc from ath10k_mem_value_read.

This patch only effect sdio chip.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.

---
 drivers/net/wireless/ath/ath10k/sdio.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
drivers/net/wireless/ath/ath10k/sdio.c +14 -4
index f49b21b137c13..fef313099e08a 100644
@@ -1564,23 +1564,33 @@ static int ath10k_sdio_hif_diag_read(struct ath10k *ar, u32 address, void *buf,
 				     size_t buf_len)
 {
 	int ret;
+	void *mem;
+
+	mem = kzalloc(buf_len, GFP_KERNEL);
+	if (!mem)
+		return -ENOMEM;
 
 	/* set window register to start read cycle */
 	ret = ath10k_sdio_write32(ar, MBOX_WINDOW_READ_ADDR_ADDRESS, address);
 	if (ret) {
 		ath10k_warn(ar, "failed to set mbox window read address: %d", ret);
-		return ret;
+		goto out;
 	}
 
 	/* read the data */
-	ret = ath10k_sdio_read(ar, MBOX_WINDOW_DATA_ADDRESS, buf, buf_len);
+	ret = ath10k_sdio_read(ar, MBOX_WINDOW_DATA_ADDRESS, mem, buf_len);
 	if (ret) {
 		ath10k_warn(ar, "failed to read from mbox window data address: %d\n",
 			    ret);
-		return ret;
+		goto out;
 	}
 
-	return 0;
+	memcpy(buf, mem, buf_len);
+
+out:
+	kfree(mem);
+
+	return ret;
 }
 
 static int ath10k_sdio_hif_diag_read32(struct ath10k *ar, u32 address,
Signature · 1 line
2.25.1
author maintainer
#57 lore raw

PATCH 57/166 KVM: fix overflow of zero page refcount with ksm running

In reply to Greg Kroah-Hartman

From: Zhuang Yanying <[email protected]>

[ Upstream commit 7df003c85218b5f5b10a7f6418208f31e813f38f ]

We are testing Virtual Machine with KSM on v5.4-rc2 kernel, and found the zero_page refcount overflow.
The cause of refcount overflow is increased in try_async_pf (get_user_page) without being decreased in mmu_set_spte() while handling ept violation.
In kvm_release_pfn_clean(), only unreserved page will call put_page. However, zero page is reserved.
So, as well as creating and destroy vm, the refcount of zero page will continue to increase until it overflows.

step1:
echo 10000 > /sys/kernel/pages_to_scan/pages_to_scan echo 1 > /sys/kernel/pages_to_scan/run
echo 1 > /sys/kernel/pages_to_scan/use_zero_pages

step2:
just create several normal qemu kvm vms.
And destroy it after 10s.
Repeat this action all the time.

After a long period of time, all domains hang because of the refcount of zero page overflow.

Qemu print error log as follow:
…
error: kvm run failed Bad address
EAX=00006cdc EBX=00000008 ECX=80202001 EDX=078bfbfd ESI=ffffffff EDI=00000000 EBP=00000008 ESP=00006cc4 EIP=000efd75 EFL=00010002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA]
CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA]

 SS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
 DS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
 FS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
 GS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]

LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT= 000f7070 00000037
IDT= 000f70ae 00000000
CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000000
Code=00 01 00 00 00 e9 e8 00 00 00 c7 05 4c 55 0f 00 01 00 00 00 <8b> 35 00 00 01 00 8b 3d 04 00 01 00 b8 d8 d3 00 00 c1 e0 08 0c ea a3 00 00 01 00 c7 05 04 …

Meanwhile, a kernel warning is departed.

 [40914.836375] WARNING: CPU: 3 PID: 82067 at ./include/linux/mm.h:987 try_get_page+0x1f/0x30
 [40914.836412] CPU: 3 PID: 82067 Comm: CPU 0/KVM Kdump: loaded Tainted: G           OE     5.2.0-rc2 #5
 [40914.836415] RIP: 0010:try_get_page+0x1f/0x30
 [40914.836417] Code: 40 00 c3 0f 1f 84 00 00 00 00 00 48 8b 47 08 a8 01 75 11 8b 47 34 85 c0 7e 10 f0 ff 47 34 b8 01 00 00 00 c3 48 8d 78 ff eb e9 <0f> 0b 31 c0 c3 66 90 66 2e 0f 1f 84 00 0
 0 00 00 00 48 8b 47 08 a8
 [40914.836418] RSP: 0018:ffffb4144e523988 EFLAGS: 00010286
 [40914.836419] RAX: 0000000080000000 RBX: 0000000000000326 RCX: 0000000000000000
 [40914.836420] RDX: 0000000000000000 RSI: 00004ffdeba10000 RDI: ffffdf07093f6440
 [40914.836421] RBP: ffffdf07093f6440 R08: 800000424fd91225 R09: 0000000000000000
 [40914.836421] R10: ffff9eb41bfeebb8 R11: 0000000000000000 R12: ffffdf06bbd1e8a8
 [40914.836422] R13: 0000000000000080 R14: 800000424fd91225 R15: ffffdf07093f6440
 [40914.836423] FS:  00007fb60ffff700(0000) GS:ffff9eb4802c0000(0000) knlGS:0000000000000000
 [40914.836425] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [40914.836426] CR2: 0000000000000000 CR3: 0000002f220e6002 CR4: 00000000003626e0
 [40914.836427] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [40914.836427] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [40914.836428] Call Trace:
 [40914.836433]  follow_page_pte+0x302/0x47b
 [40914.836437]  __get_user_pages+0xf1/0x7d0
 [40914.836441]  ? irq_work_queue+0x9/0x70
 [40914.836443]  get_user_pages_unlocked+0x13f/0x1e0
 [40914.836469]  __gfn_to_pfn_memslot+0x10e/0x400 [kvm]
 [40914.836486]  try_async_pf+0x87/0x240 [kvm]
 [40914.836503]  tdp_page_fault+0x139/0x270 [kvm]
 [40914.836523]  kvm_mmu_page_fault+0x76/0x5e0 [kvm]
 [40914.836588]  vcpu_enter_guest+0xb45/0x1570 [kvm]
 [40914.836632]  kvm_arch_vcpu_ioctl_run+0x35d/0x580 [kvm]
 [40914.836645]  kvm_vcpu_ioctl+0x26e/0x5d0 [kvm]
 [40914.836650]  do_vfs_ioctl+0xa9/0x620
 [40914.836653]  ksys_ioctl+0x60/0x90
 [40914.836654]  __x64_sys_ioctl+0x16/0x20
 [40914.836658]  do_syscall_64+0x5b/0x180
 [40914.836664]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 [40914.836666] RIP: 0033:0x7fb61cb6bfc7
---
 virt/kvm/kvm_main.c | 1 +
 1 file changed, 1 insertion(+)
virt/kvm/kvm_main.c +1 -0
index 1e30f8706349e..c1ca4d40157b1 100644
@@ -165,6 +165,7 @@ bool kvm_is_reserved_pfn(kvm_pfn_t pfn)
 	 */
 	if (pfn_valid(pfn))
 		return PageReserved(pfn_to_page(pfn)) &&
+		       !is_zero_pfn(pfn) &&
 		       !kvm_is_zone_device_pfn(pfn);
 
 	return true;
Signature · 1 line
2.25.1
author maintainer
#58 lore raw

PATCH 58/166 ALSA: hda: Clear RIRB status before reading WP

In reply to Greg Kroah-Hartman

From: Mohan Kumar <[email protected]>

[ Upstream commit 6d011d5057ff88ee556c000ac6fe0be23bdfcd72 ]

RIRB interrupt status getting cleared after the write pointer is read causes a race condition, where last response(s) into RIRB may remain unserviced by IRQ, eventually causing azx_rirb_get_response to fall back to polling mode. Clearing the RIRB interrupt status ahead of write pointer access ensures that this condition is avoided.

---
 sound/pci/hda/hda_controller.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
sound/pci/hda/hda_controller.c +9 -2
index fa261b27d8588..8198d2e53b7df 100644
@@ -1169,16 +1169,23 @@ irqreturn_t azx_interrupt(int irq, void *dev_id)
 		if (snd_hdac_bus_handle_stream_irq(bus, status, stream_update))
 			active = true;
 
-		/* clear rirb int */
 		status = azx_readb(chip, RIRBSTS);
 		if (status & RIRB_INT_MASK) {
+			/*
+			 * Clearing the interrupt status here ensures that no
+			 * interrupt gets masked after the RIRB wp is read in
+			 * snd_hdac_bus_update_rirb. This avoids a possible
+			 * race condition where codec response in RIRB may
+			 * remain unserviced by IRQ, eventually falling back
+			 * to polling mode in azx_rirb_get_response.
+			 */
+			azx_writeb(chip, RIRBSTS, RIRB_INT_MASK);
 			active = true;
 			if (status & RIRB_INT_RESPONSE) {
 				if (chip->driver_caps & AZX_DCAPS_CTX_WORKAROUND)
 					udelay(80);
 				snd_hdac_bus_update_rirb(bus);
 			}
-			azx_writeb(chip, RIRBSTS, RIRB_INT_MASK);
 		}
 	} while (active && ++repeat < 10);
 
Signature · 1 line
2.25.1
author maintainer
#59 lore raw

PATCH 59/166 skbuff: fix a data race in skb_queue_len()

In reply to Greg Kroah-Hartman

From: Qian Cai <[email protected]>

[ Upstream commit 86b18aaa2b5b5bb48e609cd591b3d2d0fdbe0442 ]

sk_buff.qlen can be accessed concurrently as noticed by KCSAN,

 BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_dgram_sendmsg

read to 0xffff8a1b1d8a81c0 of 4 bytes by task 5371 on cpu 96:

  unix_dgram_sendmsg+0x9a9/0xb70 include/linux/skbuff.h:1821
				 net/unix/af_unix.c:1761
  ____sys_sendmsg+0x33e/0x370
  ___sys_sendmsg+0xa6/0xf0
  __sys_sendmsg+0x69/0xf0
  __x64_sys_sendmsg+0x51/0x70
  do_syscall_64+0x91/0xb47
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

write to 0xffff8a1b1d8a81c0 of 4 bytes by task 1 on cpu 99:

  __skb_try_recv_from_queue+0x327/0x410 include/linux/skbuff.h:2029
  __skb_try_recv_datagram+0xbe/0x220
  unix_dgram_recvmsg+0xee/0x850
  ____sys_recvmsg+0x1fb/0x210
  ___sys_recvmsg+0xa2/0xf0
  __sys_recvmsg+0x66/0xf0
  __x64_sys_recvmsg+0x51/0x70
  do_syscall_64+0x91/0xb47
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Since only the read is operating as lockless, it could introduce a logic bug in unix_recvq_full() due to the load tearing. Fix it by adding a lockless variant of skb_queue_len() and unix_recvq_full() where READ_ONCE() is on the read while WRITE_ONCE() is on the write similar to the commit d7d16a89350a ("net: add skb_queue_empty_lockless()").

---
 include/linux/skbuff.h | 14 +++++++++++++-
 net/unix/af_unix.c     | 11 +++++++++--
 2 files changed, 22 insertions(+), 3 deletions(-)
include/linux/skbuff.h +13 -1
index 71c77463d3432..3690985e24a8a 100644
@@ -1674,6 +1674,18 @@ static inline __u32 skb_queue_len(const struct sk_buff_head *list_)
 	return list_->qlen;
 }
 
+/**
+ *	skb_queue_len_lockless	- get queue length
+ *	@list_: list to measure
+ *
+ *	Return the length of an &sk_buff queue.
+ *	This variant can be used in lockless contexts.
+ */
+static inline __u32 skb_queue_len_lockless(const struct sk_buff_head *list_)
+{
+	return READ_ONCE(list_->qlen);
+}
+
 /**
  *	__skb_queue_head_init - initialize non-spinlock portions of sk_buff_head
  *	@list: queue to initialize
@@ -1881,7 +1893,7 @@ static inline void __skb_unlink(struct sk_buff *skb, struct sk_buff_head *list)
 {
 	struct sk_buff *next, *prev;
 
-	list->qlen--;
+	WRITE_ONCE(list->qlen, list->qlen - 1);
 	next	   = skb->next;
 	prev	   = skb->prev;
 	skb->next  = skb->prev = NULL;
net/unix/af_unix.c +9 -2
index 091e93798eacc..44ff3f5c22dfd 100644
@@ -192,11 +192,17 @@ static inline int unix_may_send(struct sock *sk, struct sock *osk)
 	return unix_peer(osk) == NULL || unix_our_peer(sk, osk);
 }
 
-static inline int unix_recvq_full(struct sock const *sk)
+static inline int unix_recvq_full(const struct sock *sk)
 {
 	return skb_queue_len(&sk->sk_receive_queue) > sk->sk_max_ack_backlog;
 }
 
+static inline int unix_recvq_full_lockless(const struct sock *sk)
+{
+	return skb_queue_len_lockless(&sk->sk_receive_queue) >
+		READ_ONCE(sk->sk_max_ack_backlog);
+}
+
 struct sock *unix_peer_get(struct sock *s)
 {
 	struct sock *peer;
@@ -1792,7 +1798,8 @@ restart_locked:
 	 * - unix_peer(sk) == sk by time of get but disconnected before lock
 	 */
 	if (other != sk &&
-	    unlikely(unix_peer(other) != sk && unix_recvq_full(other))) {
+	    unlikely(unix_peer(other) != sk &&
+	    unix_recvq_full_lockless(other))) {
 		if (timeo) {
 			timeo = unix_wait_for_peer(other, timeo);
 
Signature · 1 line
2.25.1
author maintainer
#84 lore raw

PATCH 84/166 rtc: ds1374: fix possible race condition

In reply to Greg Kroah-Hartman

From: Alexandre Belloni <[email protected]>

[ Upstream commit c11af8131a4e7ba1960faed731ee7e84c2c13c94 ]

The RTC IRQ is requested before the struct rtc_device is allocated, this may lead to a NULL pointer dereference in the IRQ handler.

To fix this issue, allocating the rtc_device struct before requesting the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device to register the RTC device.

---
 drivers/rtc/rtc-ds1374.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
drivers/rtc/rtc-ds1374.c +9 -6
index 38a2e9e684df4..77a106e90124b 100644
@@ -620,6 +620,10 @@ static int ds1374_probe(struct i2c_client *client,
 	if (!ds1374)
 		return -ENOMEM;
 
+	ds1374->rtc = devm_rtc_allocate_device(&client->dev);
+	if (IS_ERR(ds1374->rtc))
+		return PTR_ERR(ds1374->rtc);
+
 	ds1374->client = client;
 	i2c_set_clientdata(client, ds1374);
 
@@ -641,12 +645,11 @@ static int ds1374_probe(struct i2c_client *client,
 		device_set_wakeup_capable(&client->dev, 1);
 	}
 
-	ds1374->rtc = devm_rtc_device_register(&client->dev, client->name,
-						&ds1374_rtc_ops, THIS_MODULE);
-	if (IS_ERR(ds1374->rtc)) {
-		dev_err(&client->dev, "unable to register the class device\n");
-		return PTR_ERR(ds1374->rtc);
-	}
+	ds1374->rtc->ops = &ds1374_rtc_ops;
+
+	ret = rtc_register_device(ds1374->rtc);
+	if (ret)
+		return ret;
 
 #ifdef CONFIG_RTC_DRV_DS1374_WDT
 	save_client = client;
Signature · 1 line
2.25.1
author maintainer
#56 lore raw

PATCH 56/166 Bluetooth: prefetch channel before killing sock

In reply to Greg Kroah-Hartman

From: Hillf Danton <[email protected]>

[ Upstream commit 2a154903cec20fb64ff4d7d617ca53c16f8fd53a ]

Prefetch channel before killing sock in order to fix UAF like

 BUG: KASAN: use-after-free in l2cap_sock_release+0x24c/0x290 net/bluetooth/l2cap_sock.c:1212
 Read of size 8 at addr ffff8880944904a0 by task syz-fuzzer/9751
Reported-by [email protected]
Fixes 6c08fc896b60 ("Bluetooth: Fix refcount use-after-free issue")
Cc Manish Mandlik <[email protected]>
---
 net/bluetooth/l2cap_sock.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
net/bluetooth/l2cap_sock.c +6 -4
index a5e618add17f4..511a1da6ca971 100644
@@ -1191,6 +1191,7 @@ static int l2cap_sock_release(struct socket *sock)
 {
 	struct sock *sk = sock->sk;
 	int err;
+	struct l2cap_chan *chan;
 
 	BT_DBG("sock %p, sk %p", sock, sk);
 
@@ -1200,15 +1201,16 @@ static int l2cap_sock_release(struct socket *sock)
 	bt_sock_unlink(&l2cap_sk_list, sk);
 
 	err = l2cap_sock_shutdown(sock, 2);
+	chan = l2cap_pi(sk)->chan;
 
-	l2cap_chan_hold(l2cap_pi(sk)->chan);
-	l2cap_chan_lock(l2cap_pi(sk)->chan);
+	l2cap_chan_hold(chan);
+	l2cap_chan_lock(chan);
 
 	sock_orphan(sk);
 	l2cap_sock_kill(sk);
 
-	l2cap_chan_unlock(l2cap_pi(sk)->chan);
-	l2cap_chan_put(l2cap_pi(sk)->chan);
+	l2cap_chan_unlock(chan);
+	l2cap_chan_put(chan);
 
 	return err;
 }
Signature · 1 line
2.25.1
author maintainer
#83 lore raw

PATCH 83/166 tpm: ibmvtpm: Wait for buffer to be set before proceeding

In reply to Greg Kroah-Hartman

From: Stefan Berger <[email protected]>

[ Upstream commit d8d74ea3c00214aee1e1826ca18e77944812b9b4 ]

Synchronize with the results from the CRQs before continuing with the initialization. This avoids trying to send TPM commands while the rtce buffer has not been allocated, yet.

This patch fixes an existing race condition that may occurr if the hypervisor does not quickly respond to the VTPM_GET_RTCE_BUFFER_SIZE request sent during initialization and therefore the ibmvtpm->rtce_buf has not been allocated at the time the first TPM command is sent.

Fixes 132f76294744 ("drivers/char/tpm: Add new device driver to support IBM vTPM")
---
 drivers/char/tpm/tpm_ibmvtpm.c | 9 +++++++++
 drivers/char/tpm/tpm_ibmvtpm.h | 1 +
 2 files changed, 10 insertions(+)
drivers/char/tpm/tpm_ibmvtpm.c +9 -0
index 569e93e1f06cc..3ba67bc6baba0 100644
@@ -588,6 +588,7 @@ static irqreturn_t ibmvtpm_interrupt(int irq, void *vtpm_instance)
 	 */
 	while ((crq = ibmvtpm_crq_get_next(ibmvtpm)) != NULL) {
 		ibmvtpm_crq_process(crq, ibmvtpm);
+		wake_up_interruptible(&ibmvtpm->crq_queue.wq);
 		crq->valid = 0;
 		smp_wmb();
 	}
@@ -635,6 +636,7 @@ static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev,
 	}
 
 	crq_q->num_entry = CRQ_RES_BUF_SIZE / sizeof(*crq_q->crq_addr);
+	init_waitqueue_head(&crq_q->wq);
 	ibmvtpm->crq_dma_handle = dma_map_single(dev, crq_q->crq_addr,
 						 CRQ_RES_BUF_SIZE,
 						 DMA_BIDIRECTIONAL);
@@ -687,6 +689,13 @@ static int tpm_ibmvtpm_probe(struct vio_dev *vio_dev,
 	if (rc)
 		goto init_irq_cleanup;
 
+	if (!wait_event_timeout(ibmvtpm->crq_queue.wq,
+				ibmvtpm->rtce_buf != NULL,
+				HZ)) {
+		dev_err(dev, "CRQ response timed out\n");
+		goto init_irq_cleanup;
+	}
+
 	return tpm_chip_register(chip);
 init_irq_cleanup:
 	do {
drivers/char/tpm/tpm_ibmvtpm.h +1 -0
index 91dfe766d0800..4f6a124601db4 100644
@@ -31,6 +31,7 @@ struct ibmvtpm_crq_queue {
 	struct ibmvtpm_crq *crq_addr;
 	u32 index;
 	u32 num_entry;
+	wait_queue_head_t wq;
 };
 
 struct ibmvtpm_dev {
Signature · 1 line
2.25.1
author maintainer
#99 lore raw

PATCH 99/166 mm/filemap.c: clear page error before actual read

In reply to Greg Kroah-Hartman

From: Xianting Tian <[email protected]>

[ Upstream commit faffdfa04fa11ccf048cebdde73db41ede0679e0 ]

Mount failure issue happens under the scenario: Application forked dozens of threads to mount the same number of cramfs images separately in docker, but several mounts failed with high probability. Mount failed due to the checking result of the page(read from the superblock of loop dev) is not uptodate after wait_on_page_locked(page) returned in function cramfs_read:

   wait_on_page_locked(page);
   if (!PageUptodate(page)) {
      ...
   }

The reason of the checking result of the page not uptodate: systemd-udevd read the loopX dev before mount, because the status of loopX is Lo_unbound at this time, so loop_make_request directly trigger the calling of io_end handler end_buffer_async_read, which called SetPageError(page). So It caused the page can't be set to uptodate in function end_buffer_async_read:

   if(page_uptodate && !PageError(page)) {
      SetPageUptodate(page);
   }

Then mount operation is performed, it used the same page which is just accessed by systemd-udevd above, Because this page is not uptodate, it will launch a actual read via submit_bh, then wait on this page by calling wait_on_page_locked(page). When the I/O of the page done, io_end handler end_buffer_async_read is called, because no one cleared the page error(during the whole read path of mount), which is caused by systemd-udevd reading, so this page is still in "PageError" status, which can't be set to uptodate in function end_buffer_async_read, then caused mount failure.

But sometimes mount succeed even through systemd-udeved read loopX dev just before, The reason is systemd-udevd launched other loopX read just between step 3.1 and 3.2, the steps as below:

1, loopX dev default status is Lo_unbound;
2, systemd-udved read loopX dev (page is set to PageError); 3, mount operation
1) set loopX status to Lo_bound; ==>systemd-udevd read loopX dev<==
2) read loopX dev(page has no error)
3) mount succeed

As the loopX dev status is set to Lo_bound after step 3.1, so the other loopX dev read by systemd-udevd will go through the whole I/O stack, part of the call trace as below:

   SYS_read
      vfs_read
          do_sync_read
              blkdev_aio_read
                 generic_file_aio_read
                     do_generic_file_read:
                        ClearPageError(page);
                        mapping->a_ops->readpage(filp, page);

here, mapping->a_ops->readpage() is blkdev_readpage. In latest kernel, some function name changed, the call trace as below:

blkdev_read_iter

      generic_file_read_iter
         generic_file_buffered_read:
            /*
             * A previous I/O error may have been due to temporary
             * failures, eg. mutipath errors.
             * Pg_error will be set again if readpage fails.
             */
            ClearPageError(page);
            /* Start the actual read. The read will unlock the page*/
            error=mapping->a_ops->readpage(flip, page);

We can see ClearPageError(page) is called before the actual read, then the read in step 3.2 succeed.

This patch is to add the calling of ClearPageError just before the actual read of read path of cramfs mount. Without the patch, the call trace as below when performing cramfs mount:

   do_mount
      cramfs_read
         cramfs_blkdev_read
            read_cache_page
               do_read_cache_page:
                  filler(data, page);
                  or
                  mapping->a_ops->readpage(data, page);

With the patch, the call trace as below when performing mount:

   do_mount
      cramfs_read
         cramfs_blkdev_read
            read_cache_page:
               do_read_cache_page:
                  ClearPageError(page); <== new add
                  filler(data, page);
                  or
                  mapping->a_ops->readpage(data, page);

With the patch, mount operation trigger the calling of ClearPageError(page) before the actual read, the page has no error if no additional page error happen when I/O done.

---
 mm/filemap.c | 8 ++++++++
 1 file changed, 8 insertions(+)
mm/filemap.c +8 -0
index a30dbf93de992..471f8091d782a 100644
@@ -2774,6 +2774,14 @@ filler:
 		unlock_page(page);
 		goto out;
 	}
+
+	/*
+	 * A previous I/O error may have been due to temporary
+	 * failures.
+	 * Clear page error before actual read, PG_error will be
+	 * set again if read page fails.
+	 */
+	ClearPageError(page);
 	goto filler;
 
 out:
Signature · 1 line
2.25.1
author maintainer
#98 lore raw

PATCH 98/166 mm/kmemleak.c: use address-of operator on section symbols

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

[ Upstream commit b0d14fc43d39203ae025f20ef4d5d25d9ccf4be1 ]

Clang warns:

mm/kmemleak.c:1955:28: warning: array comparison always evaluates to a constant [-Wtautological-compare]

        if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata)
                                  ^
  mm/kmemleak.c:1955:60: warning: array comparison always evaluates to a constant [-Wtautological-compare]
        if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata)

These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the resulting assembly with either clang/ld.lld or gcc/ld (tested with diff + objdump -Dr).

---
 mm/kmemleak.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
mm/kmemleak.c +1 -1
index d779181bed4d8..706f705c2e0a4 100644
@@ -2030,7 +2030,7 @@ void __init kmemleak_init(void)
 	create_object((unsigned long)__bss_start, __bss_stop - __bss_start,
 		      KMEMLEAK_GREY, GFP_ATOMIC);
 	/* only register .data..ro_after_init if not within .data */
-	if (__start_ro_after_init < _sdata || __end_ro_after_init > _edata)
+	if (&__start_ro_after_init < &_sdata || &__end_ro_after_init > &_edata)
 		create_object((unsigned long)__start_ro_after_init,
 			      __end_ro_after_init - __start_ro_after_init,
 			      KMEMLEAK_GREY, GFP_ATOMIC);
Signature · 1 line
2.25.1
author maintainer
#103 lore raw

PATCH 103/166 serial: uartps: Wait for tx_empty in console setup

In reply to Greg Kroah-Hartman

From: Raviteja Narayanam <[email protected]>

[ Upstream commit 42e11948ddf68b9f799cad8c0ddeab0a39da33e8 ]

On some platforms, the log is corrupted while console is being registered. It is observed that when set_termios is called, there are still some bytes in the FIFO to be transmitted.

So, wait for tx_empty inside cdns_uart_console_setup before calling set_termios.

---
 drivers/tty/serial/xilinx_uartps.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/tty/serial/xilinx_uartps.c +8 -0
index 81657f09761cd..00a740b8ad273 100644
@@ -1282,6 +1282,7 @@ static int cdns_uart_console_setup(struct console *co, char *options)
 	int bits = 8;
 	int parity = 'n';
 	int flow = 'n';
+	unsigned long time_out;
 
 	if (co->index < 0 || co->index >= CDNS_UART_NR_PORTS)
 		return -EINVAL;
@@ -1295,6 +1296,13 @@ static int cdns_uart_console_setup(struct console *co, char *options)
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 
+	/* Wait for tx_empty before setting up the console */
+	time_out = jiffies + usecs_to_jiffies(TX_TIMEOUT);
+
+	while (time_before(jiffies, time_out) &&
+	       cdns_uart_tx_empty(port) != TIOCSER_TEMT)
+		cpu_relax();
+
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
Signature · 1 line
2.25.1
author maintainer
#102 lore raw

PATCH 102/166 scsi: qedi: Fix termination timeouts in session logout

In reply to Greg Kroah-Hartman

From: Nilesh Javali <[email protected]>

[ Upstream commit b9b97e6903032ec56e6dcbe137a9819b74a17fea ]

The destroy connection ramrod timed out during session logout. Fix the wait delay for graceful vs abortive termination as per the FW requirements.

---
 drivers/scsi/qedi/qedi_iscsi.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/scsi/qedi/qedi_iscsi.c +3 -0
index fb6439bc1d9a9..4d7971c3f339b 100644
@@ -1072,6 +1072,9 @@ static void qedi_ep_disconnect(struct iscsi_endpoint *ep)
 		break;
 	}
 
+	if (!abrt_conn)
+		wait_delay += qedi->pf_params.iscsi_pf_params.two_msl_timer;
+
 	qedi_ep->state = EP_STATE_DISCONN_START;
 	ret = qedi_ops->destroy_conn(qedi->cdev, qedi_ep->handle, abrt_conn);
 	if (ret) {
Signature · 1 line
2.25.1
author maintainer
#96 lore raw

PATCH 96/166 ALSA: usb-audio: Fix case when USB MIDI interface has more than one extra endpoint descriptor

In reply to Greg Kroah-Hartman

From: Andreas Steinmetz <[email protected]>

[ Upstream commit 5c6cd7021a05a02fcf37f360592d7c18d4d807fb ]

The Miditech MIDIFACE 16x16 (USB ID 1290:1749) has more than one extra endpoint descriptor.

The first extra descriptor is: 0x06 0x30 0x00 0x00 0x00 0x00

As the code in snd_usbmidi_get_ms_info() looks only at the first extra descriptor to find USB_DT_CS_ENDPOINT the device as such is recognized but there is neither input nor output configured.

The patch iterates through the extra descriptors to find the proper one. With this patch the device is correctly configured.

---
 sound/usb/midi.c | 29 ++++++++++++++++++++++++-----
 1 file changed, 24 insertions(+), 5 deletions(-)
sound/usb/midi.c +24 -5
index 1bfae7a1c32f1..a3d1c0c1b4a67 100644
@@ -1805,6 +1805,28 @@ static int snd_usbmidi_create_endpoints(struct snd_usb_midi *umidi,
 	return 0;
 }
 
+static struct usb_ms_endpoint_descriptor *find_usb_ms_endpoint_descriptor(
+					struct usb_host_endpoint *hostep)
+{
+	unsigned char *extra = hostep->extra;
+	int extralen = hostep->extralen;
+
+	while (extralen > 3) {
+		struct usb_ms_endpoint_descriptor *ms_ep =
+				(struct usb_ms_endpoint_descriptor *)extra;
+
+		if (ms_ep->bLength > 3 &&
+		    ms_ep->bDescriptorType == USB_DT_CS_ENDPOINT &&
+		    ms_ep->bDescriptorSubtype == UAC_MS_GENERAL)
+			return ms_ep;
+		if (!extra[0])
+			break;
+		extralen -= extra[0];
+		extra += extra[0];
+	}
+	return NULL;
+}
+
 /*
  * Returns MIDIStreaming device capabilities.
  */
@@ -1842,11 +1864,8 @@ static int snd_usbmidi_get_ms_info(struct snd_usb_midi *umidi,
 		ep = get_ep_desc(hostep);
 		if (!usb_endpoint_xfer_bulk(ep) && !usb_endpoint_xfer_int(ep))
 			continue;
-		ms_ep = (struct usb_ms_endpoint_descriptor *)hostep->extra;
-		if (hostep->extralen < 4 ||
-		    ms_ep->bLength < 4 ||
-		    ms_ep->bDescriptorType != USB_DT_CS_ENDPOINT ||
-		    ms_ep->bDescriptorSubtype != UAC_MS_GENERAL)
+		ms_ep = find_usb_ms_endpoint_descriptor(hostep);
+		if (!ms_ep)
 			continue;
 		if (usb_endpoint_dir_out(ep)) {
 			if (endpoints[epidx].out_ep) {
Signature · 1 line
2.25.1
author maintainer
#97 lore raw

PATCH 97/166 NFS: Fix races nfs_page_group_destroy() vs nfs_destroy_unlinked_subrequests()

In reply to Greg Kroah-Hartman

From: Trond Myklebust <[email protected]>

[ Upstream commit 08ca8b21f760c0ed5034a5c122092eec22ccf8f4 ]

When a subrequest is being detached from the subgroup, we want to ensure that it is not holding the group lock, or in the process of waiting for the group lock.

Fixes 5b2b5187fa85 ("NFS: Fix nfs_page_group_destroy() and nfs_lock_and_join_requests() race cases")
---
 fs/nfs/pagelist.c        | 67 +++++++++++++++++++++++++++-------------
 fs/nfs/write.c           | 10 ++++--
 include/linux/nfs_page.h |  2 ++
 3 files changed, 55 insertions(+), 24 deletions(-)
fs/nfs/pagelist.c +45 -22
index 7c01936be7c70..37358dba3b033 100644
@@ -132,47 +132,70 @@ nfs_async_iocounter_wait(struct rpc_task *task, struct nfs_lock_context *l_ctx)
 EXPORT_SYMBOL_GPL(nfs_async_iocounter_wait);
 
 /*
- * nfs_page_group_lock - lock the head of the page group
- * @req - request in group that is to be locked
+ * nfs_page_set_headlock - set the request PG_HEADLOCK
+ * @req: request that is to be locked
  *
- * this lock must be held when traversing or modifying the page
- * group list
+ * this lock must be held when modifying req->wb_head
  *
  * return 0 on success, < 0 on error
  */
 int
-nfs_page_group_lock(struct nfs_page *req)
+nfs_page_set_headlock(struct nfs_page *req)
 {
-	struct nfs_page *head = req->wb_head;
-
-	WARN_ON_ONCE(head != head->wb_head);
-
-	if (!test_and_set_bit(PG_HEADLOCK, &head->wb_flags))
+	if (!test_and_set_bit(PG_HEADLOCK, &req->wb_flags))
 		return 0;
 
-	set_bit(PG_CONTENDED1, &head->wb_flags);
+	set_bit(PG_CONTENDED1, &req->wb_flags);
 	smp_mb__after_atomic();
-	return wait_on_bit_lock(&head->wb_flags, PG_HEADLOCK,
+	return wait_on_bit_lock(&req->wb_flags, PG_HEADLOCK,
 				TASK_UNINTERRUPTIBLE);
 }
 
 /*
- * nfs_page_group_unlock - unlock the head of the page group
- * @req - request in group that is to be unlocked
+ * nfs_page_clear_headlock - clear the request PG_HEADLOCK
+ * @req: request that is to be locked
  */
 void
-nfs_page_group_unlock(struct nfs_page *req)
+nfs_page_clear_headlock(struct nfs_page *req)
 {
-	struct nfs_page *head = req->wb_head;
-
-	WARN_ON_ONCE(head != head->wb_head);
-
 	smp_mb__before_atomic();
-	clear_bit(PG_HEADLOCK, &head->wb_flags);
+	clear_bit(PG_HEADLOCK, &req->wb_flags);
 	smp_mb__after_atomic();
-	if (!test_bit(PG_CONTENDED1, &head->wb_flags))
+	if (!test_bit(PG_CONTENDED1, &req->wb_flags))
 		return;
-	wake_up_bit(&head->wb_flags, PG_HEADLOCK);
+	wake_up_bit(&req->wb_flags, PG_HEADLOCK);
+}
+
+/*
+ * nfs_page_group_lock - lock the head of the page group
+ * @req: request in group that is to be locked
+ *
+ * this lock must be held when traversing or modifying the page
+ * group list
+ *
+ * return 0 on success, < 0 on error
+ */
+int
+nfs_page_group_lock(struct nfs_page *req)
+{
+	int ret;
+
+	ret = nfs_page_set_headlock(req);
+	if (ret || req->wb_head == req)
+		return ret;
+	return nfs_page_set_headlock(req->wb_head);
+}
+
+/*
+ * nfs_page_group_unlock - unlock the head of the page group
+ * @req: request in group that is to be unlocked
+ */
+void
+nfs_page_group_unlock(struct nfs_page *req)
+{
+	if (req != req->wb_head)
+		nfs_page_clear_headlock(req->wb_head);
+	nfs_page_clear_headlock(req);
 }
 
 /*
fs/nfs/write.c +8 -2
index 7b6bda68aa86a..767e46c09074b 100644
@@ -406,22 +406,28 @@ nfs_destroy_unlinked_subrequests(struct nfs_page *destroy_list,
 		destroy_list = (subreq->wb_this_page == old_head) ?
 				   NULL : subreq->wb_this_page;
 
+		/* Note: lock subreq in order to change subreq->wb_head */
+		nfs_page_set_headlock(subreq);
 		WARN_ON_ONCE(old_head != subreq->wb_head);
 
 		/* make sure old group is not used */
 		subreq->wb_this_page = subreq;
+		subreq->wb_head = subreq;
 
 		clear_bit(PG_REMOVE, &subreq->wb_flags);
 
 		/* Note: races with nfs_page_group_destroy() */
 		if (!kref_read(&subreq->wb_kref)) {
 			/* Check if we raced with nfs_page_group_destroy() */
-			if (test_and_clear_bit(PG_TEARDOWN, &subreq->wb_flags))
+			if (test_and_clear_bit(PG_TEARDOWN, &subreq->wb_flags)) {
+				nfs_page_clear_headlock(subreq);
 				nfs_free_request(subreq);
+			} else
+				nfs_page_clear_headlock(subreq);
 			continue;
 		}
+		nfs_page_clear_headlock(subreq);
 
-		subreq->wb_head = subreq;
 		nfs_release_request(old_head);
 
 		if (test_and_clear_bit(PG_INODE_REF, &subreq->wb_flags)) {
include/linux/nfs_page.h +2 -0
index ad69430fd0eb5..5162fc1533c2f 100644
@@ -142,6 +142,8 @@ extern	void nfs_unlock_and_release_request(struct nfs_page *);
 extern int nfs_page_group_lock(struct nfs_page *);
 extern void nfs_page_group_unlock(struct nfs_page *);
 extern bool nfs_page_group_sync_on_bit(struct nfs_page *, unsigned int);
+extern	int nfs_page_set_headlock(struct nfs_page *req);
+extern void nfs_page_clear_headlock(struct nfs_page *req);
 extern bool nfs_async_iocounter_wait(struct rpc_task *, struct nfs_lock_context *);
 
 /*
Signature · 1 line
2.25.1
author maintainer
#100 lore raw

PATCH 100/166 mm/vmscan.c: fix data races using kswapd_classzone_idx

In reply to Greg Kroah-Hartman

From: Qian Cai <[email protected]>

[ Upstream commit 5644e1fbbfe15ad06785502bbfe5751223e5841d ]

pgdat->kswapd_classzone_idx could be accessed concurrently in wakeup_kswapd(). Plain writes and reads without any lock protection result in data races. Fix them by adding a pair of READ|WRITE_ONCE() as well as saving a branch (compilers might well optimize the original code in an unintentional way anyway). While at it, also take care of pgdat->kswapd_order and non-kswapd threads in allow_direct_reclaim(). The data races were reported by KCSAN,

 BUG: KCSAN: data-race in wakeup_kswapd / wakeup_kswapd

write to 0xffff9f427ffff2dc of 4 bytes by task 7454 on cpu 13:

  wakeup_kswapd+0xf1/0x400
  wakeup_kswapd at mm/vmscan.c:3967
  wake_all_kswapds+0x59/0xc0
  wake_all_kswapds at mm/page_alloc.c:4241
  __alloc_pages_slowpath+0xdcc/0x1290
  __alloc_pages_slowpath at mm/page_alloc.c:4512
  __alloc_pages_nodemask+0x3bb/0x450
  alloc_pages_vma+0x8a/0x2c0
  do_anonymous_page+0x16e/0x6f0
  __handle_mm_fault+0xcd5/0xd40
  handle_mm_fault+0xfc/0x2f0
  do_page_fault+0x263/0x6f9
  page_fault+0x34/0x40

1 lock held by mtest01/7454:
#0: ffff9f425afe8808 (&mm->mmap_sem#2){++++}, at:

 do_page_fault+0x143/0x6f9
 do_user_addr_fault at arch/x86/mm/fault.c:1405
 (inlined by) do_page_fault at arch/x86/mm/fault.c:1539
 irq event stamp: 6944085
 count_memcg_event_mm+0x1a6/0x270
 count_memcg_event_mm+0x119/0x270
 __do_softirq+0x34c/0x57c
 irq_exit+0xa2/0xc0

read to 0xffff9f427ffff2dc of 4 bytes by task 7472 on cpu 38:

  wakeup_kswapd+0xc8/0x400
  wake_all_kswapds+0x59/0xc0
  __alloc_pages_slowpath+0xdcc/0x1290
  __alloc_pages_nodemask+0x3bb/0x450
  alloc_pages_vma+0x8a/0x2c0
  do_anonymous_page+0x16e/0x6f0
  __handle_mm_fault+0xcd5/0xd40
  handle_mm_fault+0xfc/0x2f0
  do_page_fault+0x263/0x6f9
  page_fault+0x34/0x40

1 lock held by mtest01/7472:
#0: ffff9f425a9ac148 (&mm->mmap_sem#2){++++}, at:

 do_page_fault+0x143/0x6f9
 irq event stamp: 6793561
 count_memcg_event_mm+0x1a6/0x270
 count_memcg_event_mm+0x119/0x270
 __do_softirq+0x34c/0x57c
 irq_exit+0xa2/0xc0

 BUG: KCSAN: data-race in kswapd / wakeup_kswapd

write to 0xffff90973ffff2dc of 4 bytes by task 820 on cpu 6:

  kswapd+0x27c/0x8d0
  kthread+0x1e0/0x200
  ret_from_fork+0x27/0x50

read to 0xffff90973ffff2dc of 4 bytes by task 6299 on cpu 0:

  wakeup_kswapd+0xf3/0x450
  wake_all_kswapds+0x59/0xc0
  __alloc_pages_slowpath+0xdcc/0x1290
  __alloc_pages_nodemask+0x3bb/0x450
  alloc_pages_vma+0x8a/0x2c0
  do_anonymous_page+0x170/0x700
  __handle_mm_fault+0xc9f/0xd00
  handle_mm_fault+0xfc/0x2f0
  do_page_fault+0x263/0x6f9
  page_fault+0x34/0x40
---
 mm/vmscan.c | 45 ++++++++++++++++++++++++++-------------------
 1 file changed, 26 insertions(+), 19 deletions(-)
mm/vmscan.c +26 -19
index c6962aa5ddb40..5ee6fbdec8a8d 100644
@@ -2950,8 +2950,9 @@ static bool allow_direct_reclaim(pg_data_t *pgdat)
 
 	/* kswapd must be awake if processes are being throttled */
 	if (!wmark_ok && waitqueue_active(&pgdat->kswapd_wait)) {
-		pgdat->kswapd_classzone_idx = min(pgdat->kswapd_classzone_idx,
-						(enum zone_type)ZONE_NORMAL);
+		if (READ_ONCE(pgdat->kswapd_classzone_idx) > ZONE_NORMAL)
+			WRITE_ONCE(pgdat->kswapd_classzone_idx, ZONE_NORMAL);
+
 		wake_up_interruptible(&pgdat->kswapd_wait);
 	}
 
@@ -3451,9 +3452,9 @@ out:
 static enum zone_type kswapd_classzone_idx(pg_data_t *pgdat,
 					   enum zone_type prev_classzone_idx)
 {
-	if (pgdat->kswapd_classzone_idx == MAX_NR_ZONES)
-		return prev_classzone_idx;
-	return pgdat->kswapd_classzone_idx;
+	enum zone_type curr_idx = READ_ONCE(pgdat->kswapd_classzone_idx);
+
+	return curr_idx == MAX_NR_ZONES ? prev_classzone_idx : curr_idx;
 }
 
 static void kswapd_try_to_sleep(pg_data_t *pgdat, int alloc_order, int reclaim_order,
@@ -3497,8 +3498,11 @@ static void kswapd_try_to_sleep(pg_data_t *pgdat, int alloc_order, int reclaim_o
 		 * the previous request that slept prematurely.
 		 */
 		if (remaining) {
-			pgdat->kswapd_classzone_idx = kswapd_classzone_idx(pgdat, classzone_idx);
-			pgdat->kswapd_order = max(pgdat->kswapd_order, reclaim_order);
+			WRITE_ONCE(pgdat->kswapd_classzone_idx,
+				   kswapd_classzone_idx(pgdat, classzone_idx));
+
+			if (READ_ONCE(pgdat->kswapd_order) < reclaim_order)
+				WRITE_ONCE(pgdat->kswapd_order, reclaim_order);
 		}
 
 		finish_wait(&pgdat->kswapd_wait, &wait);
@@ -3580,12 +3584,12 @@ static int kswapd(void *p)
 	tsk->flags |= PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD;
 	set_freezable();
 
-	pgdat->kswapd_order = 0;
-	pgdat->kswapd_classzone_idx = MAX_NR_ZONES;
+	WRITE_ONCE(pgdat->kswapd_order, 0);
+	WRITE_ONCE(pgdat->kswapd_classzone_idx, MAX_NR_ZONES);
 	for ( ; ; ) {
 		bool ret;
 
-		alloc_order = reclaim_order = pgdat->kswapd_order;
+		alloc_order = reclaim_order = READ_ONCE(pgdat->kswapd_order);
 		classzone_idx = kswapd_classzone_idx(pgdat, classzone_idx);
 
 kswapd_try_sleep:
@@ -3593,10 +3597,10 @@ kswapd_try_sleep:
 					classzone_idx);
 
 		/* Read the new order and classzone_idx */
-		alloc_order = reclaim_order = pgdat->kswapd_order;
+		alloc_order = reclaim_order = READ_ONCE(pgdat->kswapd_order);
 		classzone_idx = kswapd_classzone_idx(pgdat, classzone_idx);
-		pgdat->kswapd_order = 0;
-		pgdat->kswapd_classzone_idx = MAX_NR_ZONES;
+		WRITE_ONCE(pgdat->kswapd_order, 0);
+		WRITE_ONCE(pgdat->kswapd_classzone_idx, MAX_NR_ZONES);
 
 		ret = try_to_freeze();
 		if (kthread_should_stop())
@@ -3638,20 +3642,23 @@ kswapd_try_sleep:
 void wakeup_kswapd(struct zone *zone, int order, enum zone_type classzone_idx)
 {
 	pg_data_t *pgdat;
+	enum zone_type curr_idx;
 
 	if (!managed_zone(zone))
 		return;
 
 	if (!cpuset_zone_allowed(zone, GFP_KERNEL | __GFP_HARDWALL))
 		return;
+
 	pgdat = zone->zone_pgdat;
+	curr_idx = READ_ONCE(pgdat->kswapd_classzone_idx);
+
+	if (curr_idx == MAX_NR_ZONES || curr_idx < classzone_idx)
+		WRITE_ONCE(pgdat->kswapd_classzone_idx, classzone_idx);
+
+	if (READ_ONCE(pgdat->kswapd_order) < order)
+		WRITE_ONCE(pgdat->kswapd_order, order);
 
-	if (pgdat->kswapd_classzone_idx == MAX_NR_ZONES)
-		pgdat->kswapd_classzone_idx = classzone_idx;
-	else
-		pgdat->kswapd_classzone_idx = max(pgdat->kswapd_classzone_idx,
-						  classzone_idx);
-	pgdat->kswapd_order = max(pgdat->kswapd_order, order);
 	if (!waitqueue_active(&pgdat->kswapd_wait))
 		return;
 
Signature · 1 line
2.25.1
author maintainer
#101 lore raw

PATCH 101/166 mm/mmap.c: initialize align_offset explicitly for vm_unmapped_area

In reply to Greg Kroah-Hartman

From: Jaewon Kim <[email protected]>

[ Upstream commit 09ef5283fd96ac424ef0e569626f359bf9ab86c9 ]

On passing requirement to vm_unmapped_area, arch_get_unmapped_area and arch_get_unmapped_area_topdown did not set align_offset. Internally on both unmapped_area and unmapped_area_topdown, if info->align_mask is 0, then info->align_offset was meaningless.

But commit df529cabb7a2 ("mm: mmap: add trace point of vm_unmapped_area") always prints info->align_offset even though it is uninitialized.

Fix this uninitialized value issue by setting it to 0 explicitly.

Before:
vm_unmapped_area: addr=0x755b155000 err=0 total_vm=0x15aaf0 flags=0x1 len=0x109000 lo=0x8000 hi=0x75eed48000 mask=0x0 ofs=0x4022

After:
vm_unmapped_area: addr=0x74a4ca1000 err=0 total_vm=0x168ab1 flags=0x1 len=0x9000 lo=0x8000 hi=0x753d94b000 mask=0x0 ofs=0x0

---
 mm/mmap.c | 2 ++
 1 file changed, 2 insertions(+)
mm/mmap.c +2 -0
index 724b7c4f1a5b5..c389fd258384f 100644
@@ -2034,6 +2034,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	info.low_limit = mm->mmap_base;
 	info.high_limit = TASK_SIZE;
 	info.align_mask = 0;
+	info.align_offset = 0;
 	return vm_unmapped_area(&info);
 }
 #endif
@@ -2075,6 +2076,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 	info.low_limit = max(PAGE_SIZE, mmap_min_addr);
 	info.high_limit = mm->mmap_base;
 	info.align_mask = 0;
+	info.align_offset = 0;
 	addr = vm_unmapped_area(&info);
 
 	/*
Signature · 1 line
2.25.1
author maintainer
#107 lore raw

PATCH 107/166 staging:r8188eu: avoid skb_clone for amsdu to msdu conversion

In reply to Greg Kroah-Hartman

From: Ivan Safonov <[email protected]>

[ Upstream commit 628cbd971a927abe6388d44320e351c337b331e4 ]

skb clones use same data buffer,
so tail of one skb is corrupted by beginning of next skb.

---
 drivers/staging/rtl8188eu/core/rtw_recv.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)
drivers/staging/rtl8188eu/core/rtw_recv.c +6 -13
index afb9dadc1cfe9..77685bae21eda 100644
@@ -1541,21 +1541,14 @@ static int amsdu_to_msdu(struct adapter *padapter, struct recv_frame *prframe)
 
 		/* Allocate new skb for releasing to upper layer */
 		sub_skb = dev_alloc_skb(nSubframe_Length + 12);
-		if (sub_skb) {
-			skb_reserve(sub_skb, 12);
-			skb_put_data(sub_skb, pdata, nSubframe_Length);
-		} else {
-			sub_skb = skb_clone(prframe->pkt, GFP_ATOMIC);
-			if (sub_skb) {
-				sub_skb->data = pdata;
-				sub_skb->len = nSubframe_Length;
-				skb_set_tail_pointer(sub_skb, nSubframe_Length);
-			} else {
-				DBG_88E("skb_clone() Fail!!! , nr_subframes=%d\n", nr_subframes);
-				break;
-			}
+		if (!sub_skb) {
+			DBG_88E("dev_alloc_skb() Fail!!! , nr_subframes=%d\n", nr_subframes);
+			break;
 		}
 
+		skb_reserve(sub_skb, 12);
+		skb_put_data(sub_skb, pdata, nSubframe_Length);
+
 		subframes[nr_subframes++] = sub_skb;
 
 		if (nr_subframes >= MAX_SUBFRAME_COUNT) {
Signature · 1 line
2.25.1
author maintainer
#110 lore raw

PATCH 110/166 dt-bindings: sound: wm8994: Correct required supplies based on actual implementaion

In reply to Greg Kroah-Hartman

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 8c149b7d75e53be47648742f40fc90d9fc6fa63a ]

The required supplies in bindings were actually not matching implementation making the bindings incorrect and misleading. The Linux kernel driver requires all supplies to be present. Also for wlf,wm8994 uses just DBVDD-supply instead of DBVDDn-supply (n: <1,3>).

---
 .../devicetree/bindings/sound/wm8994.txt       | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)
Documentation/devicetree/bindings/sound/wm8994.txt +12 -6
index 68c4e8d96bed6..b309de00cd836 100644
@@ -14,9 +14,15 @@ Required properties:
   - #gpio-cells : Must be 2. The first cell is the pin number and the
     second cell is used to specify optional parameters (currently unused).
 
-  - AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply,
-    SPKVDD1-supply, SPKVDD2-supply : power supplies for the device, as covered
-    in Documentation/devicetree/bindings/regulator/regulator.txt
+  - power supplies for the device, as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt, depending
+    on compatible:
+    - for wlf,wm1811 and wlf,wm8958:
+      AVDD1-supply, AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply,
+      DCVDD-supply, CPVDD-supply, SPKVDD1-supply, SPKVDD2-supply
+    - for wlf,wm8994:
+      AVDD1-supply, AVDD2-supply, DBVDD-supply, DCVDD-supply, CPVDD-supply,
+      SPKVDD1-supply, SPKVDD2-supply
 
 Optional properties:
 
@@ -68,11 +74,11 @@ codec: wm8994@1a {
 
 	lineout1-se;
 
+	AVDD1-supply = <&regulator>;
 	AVDD2-supply = <&regulator>;
 	CPVDD-supply = <&regulator>;
-	DBVDD1-supply = <&regulator>;
-	DBVDD2-supply = <&regulator>;
-	DBVDD3-supply = <&regulator>;
+	DBVDD-supply = <&regulator>;
+	DCVDD-supply = <&regulator>;
 	SPKVDD1-supply = <&regulator>;
 	SPKVDD2-supply = <&regulator>;
 };
Signature · 1 line
2.25.1
author maintainer
#106 lore raw

PATCH 106/166 drivers: char: tlclk.c: Avoid data race between init and interrupt handler

In reply to Greg Kroah-Hartman

From: Madhuparna Bhowmik <[email protected]>

[ Upstream commit 44b8fb6eaa7c3fb770bf1e37619cdb3902cca1fc ]

After registering character device the file operation callbacks can be called. The open callback registers interrupt handler. Therefore interrupt handler can execute in parallel with rest of the init function. To avoid such data race initialize telclk_interrupt variable and struct alarm_events before registering character device.

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/char/tlclk.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)
drivers/char/tlclk.c +10 -7
index 6210bff46341e..52fadc46e7a97 100644
@@ -777,17 +777,21 @@ static int __init tlclk_init(void)
 {
 	int ret;
 
+	telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
+
+	alarm_events = kzalloc( sizeof(struct tlclk_alarms), GFP_KERNEL);
+	if (!alarm_events) {
+		ret = -ENOMEM;
+		goto out1;
+	}
+
 	ret = register_chrdev(tlclk_major, "telco_clock", &tlclk_fops);
 	if (ret < 0) {
 		printk(KERN_ERR "tlclk: can't get major %d.\n", tlclk_major);
+		kfree(alarm_events);
 		return ret;
 	}
 	tlclk_major = ret;
-	alarm_events = kzalloc( sizeof(struct tlclk_alarms), GFP_KERNEL);
-	if (!alarm_events) {
-		ret = -ENOMEM;
-		goto out1;
-	}
 
 	/* Read telecom clock IRQ number (Set by BIOS) */
 	if (!request_region(TLCLK_BASE, 8, "telco_clock")) {
@@ -796,7 +800,6 @@ static int __init tlclk_init(void)
 		ret = -EBUSY;
 		goto out2;
 	}
-	telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
 
 	if (0x0F == telclk_interrupt ) { /* not MCPBL0010 ? */
 		printk(KERN_ERR "telclk_interrupt = 0x%x non-mcpbl0010 hw.\n",
@@ -837,8 +840,8 @@ out3:
 	release_region(TLCLK_BASE, 8);
 out2:
 	kfree(alarm_events);
-out1:
 	unregister_chrdev(tlclk_major, "telco_clock");
+out1:
 	return ret;
 }
 
Signature · 1 line
2.25.1
author maintainer
#113 lore raw

PATCH 113/166 phy: samsung: s5pv210-usb2: Add delay after reset

In reply to Greg Kroah-Hartman

From: Jonathan Bakker <[email protected]>

[ Upstream commit 05942b8c36c7eb5d3fc5e375d4b0d0c49562e85d ]

The USB phy takes some time to reset, so make sure we give it to it. The delay length was taken from the 4x12 phy driver.

This manifested in issues with the DWC2 driver since commit fe369e1826b3 ("usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.") where the endianness check would read the DWC ID as 0 due to the phy still resetting, resulting in the wrong endian mode being chosen.

---
 drivers/phy/samsung/phy-s5pv210-usb2.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/phy/samsung/phy-s5pv210-usb2.c +4 -0
index f6f72339bbc32..bb7fdf491c1c2 100644
@@ -142,6 +142,10 @@ static void s5pv210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
 		udelay(10);
 		rst &= ~rstbits;
 		writel(rst, drv->reg_phy + S5PV210_UPHYRST);
+		/* The following delay is necessary for the reset sequence to be
+		 * completed
+		 */
+		udelay(80);
 	} else {
 		pwr = readl(drv->reg_phy + S5PV210_UPHYPWR);
 		pwr |= phypwr;
Signature · 1 line
2.25.1
author maintainer
#109 lore raw

PATCH 109/166 arm64: cpufeature: Relax checks for AArch32 support at EL[0-2]

In reply to Greg Kroah-Hartman

From: Will Deacon <[email protected]>

[ Upstream commit 98448cdfe7060dd5491bfbd3f7214ffe1395d58e ]

We don't need to be quite as strict about mismatched AArch32 support, which is good because the friendly hardware folks have been busy mismatching this to their hearts' content.

* We don't care about EL2 or EL3 (there are silly comments concerning the latter, so remove those)

* EL1 support is gated by the ARM64_HAS_32BIT_EL1 capability and handled gracefully when a mismatch occurs

* EL0 support is gated by the ARM64_HAS_32BIT_EL0 capability and handled gracefully when a mismatch occurs

Relax the AArch32 checks to FTR_NONSTRICT.

---
 arch/arm64/kernel/cpufeature.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
arch/arm64/kernel/cpufeature.c +3 -7
index 6b3bb67596ae8..b7d400a8921db 100644
@@ -136,11 +136,10 @@ static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_GIC_SHIFT, 4, 0),
 	S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_ASIMD_SHIFT, 4, ID_AA64PFR0_ASIMD_NI),
 	S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI),
-	/* Linux doesn't care about the EL3 */
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL3_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL2_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SHIFT, 4, ID_AA64PFR0_EL1_64BIT_ONLY),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL0_SHIFT, 4, ID_AA64PFR0_EL0_64BIT_ONLY),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SHIFT, 4, ID_AA64PFR0_EL1_64BIT_ONLY),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL0_SHIFT, 4, ID_AA64PFR0_EL0_64BIT_ONLY),
 	ARM64_FTR_END,
 };
 
@@ -627,9 +626,6 @@ void update_cpu_features(int cpu,
 	taint |= check_update_ftr_reg(SYS_ID_AA64MMFR2_EL1, cpu,
 				      info->reg_id_aa64mmfr2, boot->reg_id_aa64mmfr2);
 
-	/*
-	 * EL3 is not our concern.
-	 */
 	taint |= check_update_ftr_reg(SYS_ID_AA64PFR0_EL1, cpu,
 				      info->reg_id_aa64pfr0, boot->reg_id_aa64pfr0);
 	taint |= check_update_ftr_reg(SYS_ID_AA64PFR1_EL1, cpu,
Signature · 1 line
2.25.1
author maintainer
#121 lore raw

PATCH 121/166 arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register

In reply to Greg Kroah-Hartman

From: Anshuman Khandual <[email protected]>

[ Upstream commit 1ed1b90a0594c8c9d31e8bb8be25a2b37717dc9e ]

ID_DFR0 based TraceFilt feature should not be exposed to guests. Hence lets drop it.

Cc Catalin Marinas <[email protected]>
Cc Will Deacon <[email protected]>
Cc Marc Zyngier <[email protected]>
Cc Mark Rutland <[email protected]>
Cc James Morse <[email protected]>
Cc Suzuki K Poulose <[email protected]>
---
 arch/arm64/kernel/cpufeature.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/kernel/cpufeature.c +1 -1
index b7d400a8921db..174aa12fb8b1f 100644
@@ -272,7 +272,7 @@ static const struct arm64_ftr_bits ftr_id_pfr0[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_dfr0[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 28, 4, 0),
+	/* [31:28] TraceFilt */
 	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 24, 4, 0xf),	/* PerfMon */
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 0),
Signature · 9 lines
2.25.1




_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#88 lore raw

PATCH 88/166 serial: 8250: 8250_omap: Terminate DMA before pushing data on RX timeout

In reply to Greg Kroah-Hartman

From: Vignesh Raghavendra <[email protected]>

[ Upstream commit 7cf4df30a98175033e9849f7f16c46e96ba47f41 ]

Terminate and flush DMA internal buffers, before pushing RX data to higher layer. Otherwise, this will lead to data corruption, as driver would end up pushing stale buffer data to higher layer while actual data is still stuck inside DMA hardware and has yet not arrived at the memory.
While at that, replace deprecated dmaengine_terminate_all() with dmaengine_terminate_async().

---
 drivers/tty/serial/8250/8250_omap.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/tty/serial/8250/8250_omap.c +4 -2
index 33df33a9e646a..726852ebef855 100644
@@ -773,7 +773,10 @@ static void __dma_rx_do_complete(struct uart_8250_port *p)
 	dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
 
 	count = dma->rx_size - state.residue;
-
+	if (count < dma->rx_size)
+		dmaengine_terminate_async(dma->rxchan);
+	if (!count)
+		goto unlock;
 	ret = tty_insert_flip_string(tty_port, dma->rx_buf, count);
 
 	p->port.icount.rx += ret;
@@ -833,7 +836,6 @@ static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
 	spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
 
 	__dma_rx_do_complete(p);
-	dmaengine_terminate_all(dma->rxchan);
 }
 
 static int omap_8250_rx_dma(struct uart_8250_port *p)
Signature · 1 line
2.25.1
author maintainer
#119 lore raw

PATCH 119/166 fuse: dont check refcount after stealing page

In reply to Greg Kroah-Hartman

From: Miklos Szeredi <[email protected]>

[ Upstream commit 32f98877c57bee6bc27f443a96f49678a2cd6a50 ]

page_count() is unstable. Unless there has been an RCU grace period between when the page was removed from the page cache and now, a speculative reference may exist from the page cache.

---
 fs/fuse/dev.c | 1 -
 1 file changed, 1 deletion(-)
fs/fuse/dev.c +0 -1
index f580695b7bb9a..1b9c4c19bed29 100644
@@ -824,7 +824,6 @@ static int fuse_check_page(struct page *page)
 {
 	if (page_mapcount(page) ||
 	    page->mapping != NULL ||
-	    page_count(page) != 1 ||
 	    (page->flags & PAGE_FLAGS_CHECK_AT_PREP &
 	     ~(1 << PG_locked |
 	       1 << PG_referenced |
Signature · 1 line
2.25.1
author maintainer
#85 lore raw

PATCH 85/166 tracing: Use address-of operator on section symbols

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

[ Upstream commit bf2cbe044da275021b2de5917240411a19e5c50d ]

Clang warns:

../kernel/trace/trace.c:9335:33: warning: array comparison always evaluates to true [-Wtautological-compare]

        if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt)
                                       ^

1 warning generated.

These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the runtime result of the check (tested with some print statements compiled in with clang + ld.lld and gcc + ld.bfd in QEMU).

---
 kernel/trace/trace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/trace/trace.c +1 -1
index 22759f5607192..19526297a5b1c 100644
@@ -8346,7 +8346,7 @@ __init static int tracer_alloc_buffers(void)
 		goto out_free_buffer_mask;
 
 	/* Only allocate trace_printk buffers if a trace_printk exists */
-	if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt)
+	if (&__stop___trace_bprintk_fmt != &__start___trace_bprintk_fmt)
 		/* Must be called before global_trace.buffer is allocated */
 		trace_printk_init_buffers();
 
Signature · 1 line
2.25.1
author maintainer
#155 lore raw

PATCH 155/166 net: qed: RDMA personality shouldnt fail VF load

In reply to Greg Kroah-Hartman

From: Dmitry Bogdanov <[email protected]>

[ Upstream commit ce1cf9e5025f4e2d2198728391f1847b3e168bc6 ]

Fix the assert during VF driver installation when the personality is iWARP

Fixes 1fe614d10f45 ("qed: Relax VF firmware requirements")
---
 drivers/net/ethernet/qlogic/qed/qed_sriov.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/qlogic/qed/qed_sriov.c +1 -0
index 65a53d409e773..bc9eec1bcbf18 100644
@@ -96,6 +96,7 @@ static int qed_sp_vf_start(struct qed_hwfn *p_hwfn, struct qed_vf_info *p_vf)
 		p_ramrod->personality = PERSONALITY_ETH;
 		break;
 	case QED_PCI_ETH_ROCE:
+	case QED_PCI_ETH_IWARP:
 		p_ramrod->personality = PERSONALITY_RDMA_AND_ETH;
 		break;
 	default:
Signature · 1 line
2.25.1
author maintainer
#165 lore raw

PATCH 165/166 ata: make qc_prep return ata_completion_errors

In reply to Greg Kroah-Hartman

From: Jiri Slaby <[email protected]>

commit 95364f36701e62dd50eee91e1303187fd1a9f567 upstream.

In case a driver wants to return an error from qc_prep, return enum ata_completion_errors. sata_mv is one of those drivers -- see the next patch. Other drivers return the newly defined AC_ERR_OK.

[v2] use enum ata_completion_errors and AC_ERR_OK.

---
 Documentation/driver-api/libata.rst |    2 +-
 drivers/ata/acard-ahci.c            |    6 ++++--
 drivers/ata/libahci.c               |    6 ++++--
 drivers/ata/libata-core.c           |    9 +++++++--
 drivers/ata/libata-sff.c            |   12 ++++++++----
 drivers/ata/pata_macio.c            |    6 ++++--
 drivers/ata/pata_pxa.c              |    8 +++++---
 drivers/ata/pdc_adma.c              |    7 ++++---
 drivers/ata/sata_fsl.c              |    4 +++-
 drivers/ata/sata_inic162x.c         |    4 +++-
 drivers/ata/sata_mv.c               |   26 +++++++++++++++-----------
 drivers/ata/sata_nv.c               |   18 +++++++++++-------
 drivers/ata/sata_promise.c          |    6 ++++--
 drivers/ata/sata_qstor.c            |    8 +++++---
 drivers/ata/sata_rcar.c             |    6 ++++--
 drivers/ata/sata_sil.c              |    8 +++++---
 drivers/ata/sata_sil24.c            |    6 ++++--
 drivers/ata/sata_sx4.c              |    6 ++++--
 include/linux/libata.h              |   12 ++++++------
 19 files changed, 101 insertions(+), 59 deletions(-)
Documentation/driver-api/libata.rst +1 -1
@@ -251,7 +251,7 @@ High-level taskfile hooks
 
 ::
 
-    void (*qc_prep) (struct ata_queued_cmd *qc);
+    enum ata_completion_errors (*qc_prep) (struct ata_queued_cmd *qc);
     int (*qc_issue) (struct ata_queued_cmd *qc);
 
 
drivers/ata/acard-ahci.c +4 -2
@@ -72,7 +72,7 @@ struct acard_sg {
 	__le32			size;	 /* bit 31 (EOT) max==0x10000 (64k) */
 };
 
-static void acard_ahci_qc_prep(struct ata_queued_cmd *qc);
+static enum ata_completion_errors acard_ahci_qc_prep(struct ata_queued_cmd *qc);
 static bool acard_ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
 static int acard_ahci_port_start(struct ata_port *ap);
 static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
@@ -257,7 +257,7 @@ static unsigned int acard_ahci_fill_sg(s
 	return si;
 }
 
-static void acard_ahci_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors acard_ahci_qc_prep(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct ahci_port_priv *pp = ap->private_data;
@@ -295,6 +295,8 @@ static void acard_ahci_qc_prep(struct at
 		opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
 
 	ahci_fill_cmd_slot(pp, qc->tag, opts);
+
+	return AC_ERR_OK;
 }
 
 static bool acard_ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
drivers/ata/libahci.c +4 -2
@@ -73,7 +73,7 @@ static int ahci_scr_write(struct ata_lin
 static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
 static int ahci_port_start(struct ata_port *ap);
 static void ahci_port_stop(struct ata_port *ap);
-static void ahci_qc_prep(struct ata_queued_cmd *qc);
+static enum ata_completion_errors ahci_qc_prep(struct ata_queued_cmd *qc);
 static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc);
 static void ahci_freeze(struct ata_port *ap);
 static void ahci_thaw(struct ata_port *ap);
@@ -1626,7 +1626,7 @@ static int ahci_pmp_qc_defer(struct ata_
 		return sata_pmp_qc_defer_cmd_switch(qc);
 }
 
-static void ahci_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors ahci_qc_prep(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct ahci_port_priv *pp = ap->private_data;
@@ -1662,6 +1662,8 @@ static void ahci_qc_prep(struct ata_queu
 		opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
 
 	ahci_fill_cmd_slot(pp, qc->tag, opts);
+
+	return AC_ERR_OK;
 }
 
 static void ahci_fbs_dec_intr(struct ata_port *ap)
drivers/ata/libata-core.c +7 -2
@@ -4986,7 +4986,10 @@ int ata_std_qc_defer(struct ata_queued_c
 	return ATA_DEFER_LINK;
 }
 
-void ata_noop_qc_prep(struct ata_queued_cmd *qc) { }
+enum ata_completion_errors ata_noop_qc_prep(struct ata_queued_cmd *qc)
+{
+	return AC_ERR_OK;
+}
 
 /**
  *	ata_sg_init - Associate command with scatter-gather table.
@@ -5439,7 +5442,9 @@ void ata_qc_issue(struct ata_queued_cmd
 		return;
 	}
 
-	ap->ops->qc_prep(qc);
+	qc->err_mask |= ap->ops->qc_prep(qc);
+	if (unlikely(qc->err_mask))
+		goto err;
 	trace_ata_qc_issue(qc);
 	qc->err_mask |= ap->ops->qc_issue(qc);
 	if (unlikely(qc->err_mask))
drivers/ata/libata-sff.c +8 -4
@@ -2725,12 +2725,14 @@ static void ata_bmdma_fill_sg_dumb(struc
  *	LOCKING:
  *	spin_lock_irqsave(host lock)
  */
-void ata_bmdma_qc_prep(struct ata_queued_cmd *qc)
+enum ata_completion_errors ata_bmdma_qc_prep(struct ata_queued_cmd *qc)
 {
 	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
-		return;
+		return AC_ERR_OK;
 
 	ata_bmdma_fill_sg(qc);
+
+	return AC_ERR_OK;
 }
 EXPORT_SYMBOL_GPL(ata_bmdma_qc_prep);
 
@@ -2743,12 +2745,14 @@ EXPORT_SYMBOL_GPL(ata_bmdma_qc_prep);
  *	LOCKING:
  *	spin_lock_irqsave(host lock)
  */
-void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc)
+enum ata_completion_errors ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc)
 {
 	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
-		return;
+		return AC_ERR_OK;
 
 	ata_bmdma_fill_sg_dumb(qc);
+
+	return AC_ERR_OK;
 }
 EXPORT_SYMBOL_GPL(ata_bmdma_dumb_qc_prep);
 
drivers/ata/pata_macio.c +4 -2
@@ -507,7 +507,7 @@ static int pata_macio_cable_detect(struc
 	return ATA_CBL_PATA40;
 }
 
-static void pata_macio_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors pata_macio_qc_prep(struct ata_queued_cmd *qc)
 {
 	unsigned int write = (qc->tf.flags & ATA_TFLAG_WRITE);
 	struct ata_port *ap = qc->ap;
@@ -520,7 +520,7 @@ static void pata_macio_qc_prep(struct at
 		   __func__, qc, qc->flags, write, qc->dev->devno);
 
 	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
-		return;
+		return AC_ERR_OK;
 
 	table = (struct dbdma_cmd *) priv->dma_table_cpu;
 
@@ -565,6 +565,8 @@ static void pata_macio_qc_prep(struct at
 	table->command = cpu_to_le16(DBDMA_STOP);
 
 	dev_dbgdma(priv->dev, "%s: %d DMA list entries\n", __func__, pi);
+
+	return AC_ERR_OK;
 }
 
 
drivers/ata/pata_pxa.c +5 -3
@@ -59,25 +59,27 @@ static void pxa_ata_dma_irq(void *d)
 /*
  * Prepare taskfile for submission.
  */
-static void pxa_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors pxa_qc_prep(struct ata_queued_cmd *qc)
 {
 	struct pata_pxa_data *pd = qc->ap->private_data;
 	struct dma_async_tx_descriptor *tx;
 	enum dma_transfer_direction dir;
 
 	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
-		return;
+		return AC_ERR_OK;
 
 	dir = (qc->dma_dir == DMA_TO_DEVICE ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM);
 	tx = dmaengine_prep_slave_sg(pd->dma_chan, qc->sg, qc->n_elem, dir,
 				     DMA_PREP_INTERRUPT);
 	if (!tx) {
 		ata_dev_err(qc->dev, "prep_slave_sg() failed\n");
-		return;
+		return AC_ERR_OK;
 	}
 	tx->callback = pxa_ata_dma_irq;
 	tx->callback_param = pd;
 	pd->dma_cookie = dmaengine_submit(tx);
+
+	return AC_ERR_OK;
 }
 
 /*
drivers/ata/pdc_adma.c +4 -3
@@ -132,7 +132,7 @@ static int adma_ata_init_one(struct pci_
 				const struct pci_device_id *ent);
 static int adma_port_start(struct ata_port *ap);
 static void adma_port_stop(struct ata_port *ap);
-static void adma_qc_prep(struct ata_queued_cmd *qc);
+static enum ata_completion_errors adma_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int adma_qc_issue(struct ata_queued_cmd *qc);
 static int adma_check_atapi_dma(struct ata_queued_cmd *qc);
 static void adma_freeze(struct ata_port *ap);
@@ -311,7 +311,7 @@ static int adma_fill_sg(struct ata_queue
 	return i;
 }
 
-static void adma_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors adma_qc_prep(struct ata_queued_cmd *qc)
 {
 	struct adma_port_priv *pp = qc->ap->private_data;
 	u8  *buf = pp->pkt;
@@ -322,7 +322,7 @@ static void adma_qc_prep(struct ata_queu
 
 	adma_enter_reg_mode(qc->ap);
 	if (qc->tf.protocol != ATA_PROT_DMA)
-		return;
+		return AC_ERR_OK;
 
 	buf[i++] = 0;	/* Response flags */
 	buf[i++] = 0;	/* reserved */
@@ -387,6 +387,7 @@ static void adma_qc_prep(struct ata_queu
 			printk("%s\n", obuf);
 	}
 #endif
+	return AC_ERR_OK;
 }
 
 static inline void adma_packet_start(struct ata_queued_cmd *qc)
drivers/ata/sata_fsl.c +3 -1
@@ -513,7 +513,7 @@ static unsigned int sata_fsl_fill_sg(str
 	return num_prde;
 }
 
-static void sata_fsl_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors sata_fsl_qc_prep(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct sata_fsl_port_priv *pp = ap->private_data;
@@ -559,6 +559,8 @@ static void sata_fsl_qc_prep(struct ata_
 
 	VPRINTK("SATA FSL : xx_qc_prep, di = 0x%x, ttl = %d, num_prde = %d\n",
 		desc_info, ttl_dwords, num_prde);
+
+	return AC_ERR_OK;
 }
 
 static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc)
drivers/ata/sata_inic162x.c +3 -1
@@ -472,7 +472,7 @@ static void inic_fill_sg(struct inic_prd
 	prd[-1].flags |= PRD_END;
 }
 
-static void inic_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors inic_qc_prep(struct ata_queued_cmd *qc)
 {
 	struct inic_port_priv *pp = qc->ap->private_data;
 	struct inic_pkt *pkt = pp->pkt;
@@ -532,6 +532,8 @@ static void inic_qc_prep(struct ata_queu
 		inic_fill_sg(prd, qc);
 
 	pp->cpb_tbl[0] = pp->pkt_dma;
+
+	return AC_ERR_OK;
 }
 
 static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
drivers/ata/sata_mv.c +15 -11
@@ -605,8 +605,8 @@ static int mv5_scr_write(struct ata_link
 static int mv_port_start(struct ata_port *ap);
 static void mv_port_stop(struct ata_port *ap);
 static int mv_qc_defer(struct ata_queued_cmd *qc);
-static void mv_qc_prep(struct ata_queued_cmd *qc);
-static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
+static enum ata_completion_errors mv_qc_prep(struct ata_queued_cmd *qc);
+static enum ata_completion_errors mv_qc_prep_iie(struct ata_queued_cmd *qc);
 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
 static int mv_hardreset(struct ata_link *link, unsigned int *class,
 			unsigned long deadline);
@@ -2044,7 +2044,7 @@ static void mv_rw_multi_errata_sata24(st
  *      LOCKING:
  *      Inherited from caller.
  */
-static void mv_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors mv_qc_prep(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct mv_port_priv *pp = ap->private_data;
@@ -2056,15 +2056,15 @@ static void mv_qc_prep(struct ata_queued
 	switch (tf->protocol) {
 	case ATA_PROT_DMA:
 		if (tf->command == ATA_CMD_DSM)
-			return;
+			return AC_ERR_OK;
 		/* fall-thru */
 	case ATA_PROT_NCQ:
 		break;	/* continue below */
 	case ATA_PROT_PIO:
 		mv_rw_multi_errata_sata24(qc);
-		return;
+		return AC_ERR_OK;
 	default:
-		return;
+		return AC_ERR_OK;
 	}
 
 	/* Fill in command request block
@@ -2129,8 +2129,10 @@ static void mv_qc_prep(struct ata_queued
 	mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1);	/* last */
 
 	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
-		return;
+		return AC_ERR_OK;
 	mv_fill_sg(qc);
+
+	return AC_ERR_OK;
 }
 
 /**
@@ -2145,7 +2147,7 @@ static void mv_qc_prep(struct ata_queued
  *      LOCKING:
  *      Inherited from caller.
  */
-static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
+static enum ata_completion_errors mv_qc_prep_iie(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct mv_port_priv *pp = ap->private_data;
@@ -2156,9 +2158,9 @@ static void mv_qc_prep_iie(struct ata_qu
 
 	if ((tf->protocol != ATA_PROT_DMA) &&
 	    (tf->protocol != ATA_PROT_NCQ))
-		return;
+		return AC_ERR_OK;
 	if (tf->command == ATA_CMD_DSM)
-		return;  /* use bmdma for this */
+		return AC_ERR_OK;  /* use bmdma for this */
 
 	/* Fill in Gen IIE command request block */
 	if (!(tf->flags & ATA_TFLAG_WRITE))
@@ -2199,8 +2201,10 @@ static void mv_qc_prep_iie(struct ata_qu
 		);
 
 	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
-		return;
+		return AC_ERR_OK;
 	mv_fill_sg(qc);
+
+	return AC_ERR_OK;
 }
 
 /**
drivers/ata/sata_nv.c +11 -7
@@ -313,7 +313,7 @@ static void nv_ck804_freeze(struct ata_p
 static void nv_ck804_thaw(struct ata_port *ap);
 static int nv_adma_slave_config(struct scsi_device *sdev);
 static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
-static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
+static enum ata_completion_errors nv_adma_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc);
 static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance);
 static void nv_adma_irq_clear(struct ata_port *ap);
@@ -335,7 +335,7 @@ static void nv_mcp55_freeze(struct ata_p
 static void nv_swncq_error_handler(struct ata_port *ap);
 static int nv_swncq_slave_config(struct scsi_device *sdev);
 static int nv_swncq_port_start(struct ata_port *ap);
-static void nv_swncq_qc_prep(struct ata_queued_cmd *qc);
+static enum ata_completion_errors nv_swncq_qc_prep(struct ata_queued_cmd *qc);
 static void nv_swncq_fill_sg(struct ata_queued_cmd *qc);
 static unsigned int nv_swncq_qc_issue(struct ata_queued_cmd *qc);
 static void nv_swncq_irq_clear(struct ata_port *ap, u16 fis);
@@ -1382,7 +1382,7 @@ static int nv_adma_use_reg_mode(struct a
 	return 1;
 }
 
-static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors nv_adma_qc_prep(struct ata_queued_cmd *qc)
 {
 	struct nv_adma_port_priv *pp = qc->ap->private_data;
 	struct nv_adma_cpb *cpb = &pp->cpb[qc->tag];
@@ -1394,7 +1394,7 @@ static void nv_adma_qc_prep(struct ata_q
 			(qc->flags & ATA_QCFLAG_DMAMAP));
 		nv_adma_register_mode(qc->ap);
 		ata_bmdma_qc_prep(qc);
-		return;
+		return AC_ERR_OK;
 	}
 
 	cpb->resp_flags = NV_CPB_RESP_DONE;
@@ -1426,6 +1426,8 @@ static void nv_adma_qc_prep(struct ata_q
 	cpb->ctl_flags = ctl_flags;
 	wmb();
 	cpb->resp_flags = 0;
+
+	return AC_ERR_OK;
 }
 
 static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
@@ -1989,17 +1991,19 @@ static int nv_swncq_port_start(struct at
 	return 0;
 }
 
-static void nv_swncq_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors nv_swncq_qc_prep(struct ata_queued_cmd *qc)
 {
 	if (qc->tf.protocol != ATA_PROT_NCQ) {
 		ata_bmdma_qc_prep(qc);
-		return;
+		return AC_ERR_OK;
 	}
 
 	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
-		return;
+		return AC_ERR_OK;
 
 	nv_swncq_fill_sg(qc);
+
+	return AC_ERR_OK;
 }
 
 static void nv_swncq_fill_sg(struct ata_queued_cmd *qc)
drivers/ata/sata_promise.c +4 -2
@@ -155,7 +155,7 @@ static int pdc_sata_scr_write(struct ata
 static int pdc_ata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 static int pdc_common_port_start(struct ata_port *ap);
 static int pdc_sata_port_start(struct ata_port *ap);
-static void pdc_qc_prep(struct ata_queued_cmd *qc);
+static enum ata_completion_errors pdc_qc_prep(struct ata_queued_cmd *qc);
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
 static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
 static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
@@ -649,7 +649,7 @@ static void pdc_fill_sg(struct ata_queue
 	prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
 }
 
-static void pdc_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors pdc_qc_prep(struct ata_queued_cmd *qc)
 {
 	struct pdc_port_priv *pp = qc->ap->private_data;
 	unsigned int i;
@@ -681,6 +681,8 @@ static void pdc_qc_prep(struct ata_queue
 	default:
 		break;
 	}
+
+	return AC_ERR_OK;
 }
 
 static int pdc_is_sataii_tx4(unsigned long flags)
drivers/ata/sata_qstor.c +5 -3
@@ -116,7 +116,7 @@ static int qs_scr_write(struct ata_link
 static int qs_ata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 static int qs_port_start(struct ata_port *ap);
 static void qs_host_stop(struct ata_host *host);
-static void qs_qc_prep(struct ata_queued_cmd *qc);
+static enum ata_completion_errors qs_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int qs_qc_issue(struct ata_queued_cmd *qc);
 static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
 static void qs_freeze(struct ata_port *ap);
@@ -276,7 +276,7 @@ static unsigned int qs_fill_sg(struct at
 	return si;
 }
 
-static void qs_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors qs_qc_prep(struct ata_queued_cmd *qc)
 {
 	struct qs_port_priv *pp = qc->ap->private_data;
 	u8 dflags = QS_DF_PORD, *buf = pp->pkt;
@@ -288,7 +288,7 @@ static void qs_qc_prep(struct ata_queued
 
 	qs_enter_reg_mode(qc->ap);
 	if (qc->tf.protocol != ATA_PROT_DMA)
-		return;
+		return AC_ERR_OK;
 
 	nelem = qs_fill_sg(qc);
 
@@ -311,6 +311,8 @@ static void qs_qc_prep(struct ata_queued
 
 	/* frame information structure (FIS) */
 	ata_tf_to_fis(&qc->tf, 0, 1, &buf[32]);
+
+	return AC_ERR_OK;
 }
 
 static inline void qs_packet_start(struct ata_queued_cmd *qc)
drivers/ata/sata_rcar.c +4 -2
@@ -551,12 +551,14 @@ static void sata_rcar_bmdma_fill_sg(stru
 	prd[si - 1].addr |= cpu_to_le32(SATA_RCAR_DTEND);
 }
 
-static void sata_rcar_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors sata_rcar_qc_prep(struct ata_queued_cmd *qc)
 {
 	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
-		return;
+		return AC_ERR_OK;
 
 	sata_rcar_bmdma_fill_sg(qc);
+
+	return AC_ERR_OK;
 }
 
 static void sata_rcar_bmdma_setup(struct ata_queued_cmd *qc)
drivers/ata/sata_sil.c +5 -3
@@ -119,7 +119,7 @@ static void sil_dev_config(struct ata_de
 static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
 static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
 static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed);
-static void sil_qc_prep(struct ata_queued_cmd *qc);
+static enum ata_completion_errors sil_qc_prep(struct ata_queued_cmd *qc);
 static void sil_bmdma_setup(struct ata_queued_cmd *qc);
 static void sil_bmdma_start(struct ata_queued_cmd *qc);
 static void sil_bmdma_stop(struct ata_queued_cmd *qc);
@@ -333,12 +333,14 @@ static void sil_fill_sg(struct ata_queue
 		last_prd->flags_len |= cpu_to_le32(ATA_PRD_EOT);
 }
 
-static void sil_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors sil_qc_prep(struct ata_queued_cmd *qc)
 {
 	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
-		return;
+		return AC_ERR_OK;
 
 	sil_fill_sg(qc);
+
+	return AC_ERR_OK;
 }
 
 static unsigned char sil_get_device_cache_line(struct pci_dev *pdev)
drivers/ata/sata_sil24.c +4 -2
@@ -336,7 +336,7 @@ static void sil24_dev_config(struct ata_
 static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val);
 static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val);
 static int sil24_qc_defer(struct ata_queued_cmd *qc);
-static void sil24_qc_prep(struct ata_queued_cmd *qc);
+static enum ata_completion_errors sil24_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
 static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc);
 static void sil24_pmp_attach(struct ata_port *ap);
@@ -840,7 +840,7 @@ static int sil24_qc_defer(struct ata_que
 	return ata_std_qc_defer(qc);
 }
 
-static void sil24_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors sil24_qc_prep(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct sil24_port_priv *pp = ap->private_data;
@@ -884,6 +884,8 @@ static void sil24_qc_prep(struct ata_que
 
 	if (qc->flags & ATA_QCFLAG_DMAMAP)
 		sil24_fill_sg(qc, sge);
+
+	return AC_ERR_OK;
 }
 
 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
drivers/ata/sata_sx4.c +4 -2
@@ -218,7 +218,7 @@ static void pdc_error_handler(struct ata
 static void pdc_freeze(struct ata_port *ap);
 static void pdc_thaw(struct ata_port *ap);
 static int pdc_port_start(struct ata_port *ap);
-static void pdc20621_qc_prep(struct ata_queued_cmd *qc);
+static enum ata_completion_errors pdc20621_qc_prep(struct ata_queued_cmd *qc);
 static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
 static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
 static unsigned int pdc20621_dimm_init(struct ata_host *host);
@@ -546,7 +546,7 @@ static void pdc20621_nodata_prep(struct
 	VPRINTK("ata pkt buf ofs %u, mmio copied\n", i);
 }
 
-static void pdc20621_qc_prep(struct ata_queued_cmd *qc)
+static enum ata_completion_errors pdc20621_qc_prep(struct ata_queued_cmd *qc)
 {
 	switch (qc->tf.protocol) {
 	case ATA_PROT_DMA:
@@ -558,6 +558,8 @@ static void pdc20621_qc_prep(struct ata_
 	default:
 		break;
 	}
+
+	return AC_ERR_OK;
 }
 
 static void __pdc20621_push_hdma(struct ata_queued_cmd *qc,
include/linux/libata.h +6 -6
@@ -910,9 +910,9 @@ struct ata_port_operations {
 	/*
 	 * Command execution
 	 */
-	int  (*qc_defer)(struct ata_queued_cmd *qc);
-	int  (*check_atapi_dma)(struct ata_queued_cmd *qc);
-	void (*qc_prep)(struct ata_queued_cmd *qc);
+	int (*qc_defer)(struct ata_queued_cmd *qc);
+	int (*check_atapi_dma)(struct ata_queued_cmd *qc);
+	enum ata_completion_errors (*qc_prep)(struct ata_queued_cmd *qc);
 	unsigned int (*qc_issue)(struct ata_queued_cmd *qc);
 	bool (*qc_fill_rtf)(struct ata_queued_cmd *qc);
 
@@ -1176,7 +1176,7 @@ extern int ata_xfer_mode2shift(unsigned
 extern const char *ata_mode_string(unsigned long xfer_mask);
 extern unsigned long ata_id_xfermask(const u16 *id);
 extern int ata_std_qc_defer(struct ata_queued_cmd *qc);
-extern void ata_noop_qc_prep(struct ata_queued_cmd *qc);
+extern enum ata_completion_errors ata_noop_qc_prep(struct ata_queued_cmd *qc);
 extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
 		 unsigned int n_elem);
 extern unsigned int ata_dev_classify(const struct ata_taskfile *tf);
@@ -1890,9 +1890,9 @@ extern const struct ata_port_operations
 	.sg_tablesize		= LIBATA_MAX_PRD,		\
 	.dma_boundary		= ATA_DMA_BOUNDARY
 
-extern void ata_bmdma_qc_prep(struct ata_queued_cmd *qc);
+extern enum ata_completion_errors ata_bmdma_qc_prep(struct ata_queued_cmd *qc);
 extern unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc);
-extern void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc);
+extern enum ata_completion_errors ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc);
 extern unsigned int ata_bmdma_port_intr(struct ata_port *ap,
 				      struct ata_queued_cmd *qc);
 extern irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance);
author maintainer
#152 lore raw

PATCH 152/166 batman-adv: mcast/TT: fix wrongly dropped or rerouted packets

In reply to Greg Kroah-Hartman

From: Linus Lüssing <[email protected]>

[ Upstream commit 7dda5b3384121181c4e79f6eaeac2b94c0622c8d ]

The unicast packet rerouting code makes several assumptions. For instance it assumes that there is always exactly one destination in the TT. This breaks for multicast frames in a unicast packets in several ways:

For one thing if there is actually no TT entry and the destination node was selected due to the multicast tvlv flags it announced. Then an intermediate node will wrongly drop the packet.

For another thing if there is a TT entry but the TTVN of this entry is newer than the originally addressed destination node: Then the intermediate node will wrongly redirect the packet, leading to duplicated multicast packets at a multicast listener and missing packets at other multicast listeners or multicast routers.

Fixing this by not applying the unicast packet rerouting to batman-adv unicast packets with a multicast payload. We are not able to detect a roaming multicast listener at the moment and will just continue to send the multicast frame to both the new and old destination for a while in case of such a roaming multicast listener.

Fixes a73105b8d4c7 ("batman-adv: improved client announcement mechanism")
---
 net/batman-adv/routing.c | 4 ++++
 1 file changed, 4 insertions(+)
net/batman-adv/routing.c +4 -0
index f59aac06733e1..83f73f840ff91 100644
@@ -822,6 +822,10 @@ static bool batadv_check_unicast_ttvn(struct batadv_priv *bat_priv,
 	vid = batadv_get_vid(skb, hdr_len);
 	ethhdr = (struct ethhdr *)(skb->data + hdr_len);
 
+	/* do not reroute multicast frames in a unicast header */
+	if (is_multicast_ether_addr(ethhdr->h_dest))
+		return true;
+
 	/* check if the destination client was served by this node and it is now
 	 * roaming. In this case, it means that the node has got a ROAM_ADV
 	 * message and that it knows the new destination in the mesh to re-route
Signature · 1 line
2.25.1
author maintainer
#163 lore raw

PATCH 163/166 lib/string.c: implement stpcpy

In reply to Greg Kroah-Hartman

From: Nick Desaulniers <[email protected]>

commit 1e1b6d63d6340764e00356873e5794225a2a03ea upstream.

LLVM implemented a recent "libcall optimization" that lowers calls to sprintf(dest, "%s", str) where the return value is used to stpcpy(dest, str) - dest.

This generally avoids the machinery involved in parsing format strings. stpcpy is just like strcpy except it returns the pointer to the new tail of dest. This optimization was introduced into clang-12.

Implement this so that we don't observe linkage failures due to missing symbol definitions for stpcpy.

Similar to last year's fire drill with: commit 5f074f3e192f ("lib/string.c: implement a basic bcmp")

The kernel is somewhere between a "freestanding" environment (no full libc) and "hosted" environment (many symbols from libc exist with the same type, function signature, and semantics).

As Peter Anvin notes, there's not really a great way to inform the compiler that you're targeting a freestanding environment but would like to opt-in to some libcall optimizations (see pr/47280 below), rather than opt-out.

Arvind notes, -fno-builtin-* behaves slightly differently between GCC and Clang, and Clang is missing many __builtin_* definitions, which I consider a bug in Clang and am working on fixing.

Masahiro summarizes the subtle distinction between compilers justly:
To prevent transformation from foo() into bar(), there are two ways in Clang to do that; -fno-builtin-foo, and -fno-builtin-bar. There is only one in GCC; -fno-buitin-foo.

(Any difference in that behavior in Clang is likely a bug from a missing __builtin_* definition.)

Masahiro also notes:
We want to disable optimization from foo() to bar(),
but we may still benefit from the optimization from foo() into something else. If GCC implements the same transform, we would run into a problem because it is not -fno-builtin-bar, but -fno-builtin-foo that disables that optimization.

In this regard, -fno-builtin-foo would be more future-proof than -fno-built-bar, but -fno-builtin-foo is still potentially overkill. We may want to prevent calls from foo() being optimized into calls to bar(), but we still may want other optimization on calls to foo().

It seems that compilers today don't quite provide the fine grain control over which libcall optimizations pseudo-freestanding environments would prefer.

Finally, Kees notes that this interface is unsafe, so we should not encourage its use. As such, I've removed the declaration from any header, but it still needs to be exported to avoid linkage errors in modules.

---
 lib/string.c |   24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
lib/string.c +24 -0
@@ -236,6 +236,30 @@ ssize_t strscpy(char *dest, const char *
 EXPORT_SYMBOL(strscpy);
 #endif
 
+/**
+ * stpcpy - copy a string from src to dest returning a pointer to the new end
+ *          of dest, including src's %NUL-terminator. May overrun dest.
+ * @dest: pointer to end of string being copied into. Must be large enough
+ *        to receive copy.
+ * @src: pointer to the beginning of string being copied from. Must not overlap
+ *       dest.
+ *
+ * stpcpy differs from strcpy in a key way: the return value is a pointer
+ * to the new %NUL-terminating character in @dest. (For strcpy, the return
+ * value is a pointer to the start of @dest). This interface is considered
+ * unsafe as it doesn't perform bounds checking of the inputs. As such it's
+ * not recommended for usage. Instead, its definition is provided in case
+ * the compiler lowers other libcalls to stpcpy.
+ */
+char *stpcpy(char *__restrict__ dest, const char *__restrict__ src);
+char *stpcpy(char *__restrict__ dest, const char *__restrict__ src)
+{
+	while ((*dest++ = *src++) != '\0')
+		/* nothing */;
+	return --dest;
+}
+EXPORT_SYMBOL(stpcpy);
+
 #ifndef __HAVE_ARCH_STRCAT
 /**
  * strcat - Append one %NUL-terminated string to another
author maintainer
#166 lore raw

PATCH 166/166 ata: sata_mv, avoid trigerrable BUG_ON

In reply to Greg Kroah-Hartman

From: Jiri Slaby <[email protected]>

commit e9f691d899188679746eeb96e6cb520459eda9b4 upstream.

There are several reports that the BUG_ON on unsupported command in mv_qc_prep can be triggered under some circumstances:
https://bugzilla.suse.com/show_bug.cgi?id=1110252
https://serverfault.com/questions/888897/raid-problems-after-power-outage
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1652185
https://bugs.centos.org/view.php?id=14998

Let sata_mv handle the failure gracefully: warn about that incl. the failed command number and return an AC_ERR_INVALID error. We can do that now thanks to the previous patch.

Remove also the long-standing FIXME.

[v2] use %.2x as commands are defined as hexa.

---
 drivers/ata/sata_mv.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/ata/sata_mv.c +3 -5
@@ -2111,12 +2111,10 @@ static enum ata_completion_errors mv_qc_
 		 * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none
 		 * of which are defined/used by Linux.  If we get here, this
 		 * driver needs work.
-		 *
-		 * FIXME: modify libata to give qc_prep a return value and
-		 * return error here.
 		 */
-		BUG_ON(tf->command);
-		break;
+		ata_port_err(ap, "%s: unsupported command: %.2x\n", __func__,
+				tf->command);
+		return AC_ERR_INVALID;
 	}
 	mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0);
 	mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0);
author maintainer
#150 lore raw

PATCH 150/166 batman-adv: bla: fix type misuse for backbone_gw hash indexing

In reply to Greg Kroah-Hartman

From: Linus Lüssing <[email protected]>

[ Upstream commit 097930e85f90f252c44dc0d084598265dd44ca48 ]

It seems that due to a copy & paste error the void pointer in batadv_choose_backbone_gw() is cast to the wrong type.

Fixing this by using "struct batadv_bla_backbone_gw" instead of "struct batadv_bla_claim" which better matches the caller's side.

For now it seems that we were lucky because the two structs both have their orig/vid and addr/vid in the beginning. However I stumbled over this issue when I was trying to add some debug variables in front of "orig" in batadv_backbone_gw, which caused hash lookups to fail.

Fixes 07568d0369f9 ("batman-adv: don't rely on positions in struct for hashing")
---
 net/batman-adv/bridge_loop_avoidance.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
net/batman-adv/bridge_loop_avoidance.c +4 -3
index ae647fa69ce85..0f1a77d6aa932 100644
@@ -95,11 +95,12 @@ static inline u32 batadv_choose_claim(const void *data, u32 size)
  */
 static inline u32 batadv_choose_backbone_gw(const void *data, u32 size)
 {
-	const struct batadv_bla_claim *claim = (struct batadv_bla_claim *)data;
+	const struct batadv_bla_backbone_gw *gw;
 	u32 hash = 0;
 
-	hash = jhash(&claim->addr, sizeof(claim->addr), hash);
-	hash = jhash(&claim->vid, sizeof(claim->vid), hash);
+	gw = (struct batadv_bla_backbone_gw *)data;
+	hash = jhash(&gw->orig, sizeof(gw->orig), hash);
+	hash = jhash(&gw->vid, sizeof(gw->vid), hash);
 
 	return hash % size;
 }
Signature · 1 line
2.25.1
author maintainer
#154 lore raw

PATCH 154/166 drm/vc4/vc4_hdmi: fill ASoC card owner

In reply to Greg Kroah-Hartman

From: Marek Szyprowski <[email protected]>

[ Upstream commit ec653df2a0cbc306a4bfcb0e3484d318fa779002 ]

card->owner is a required property and since commit 81033c6b584b ("ALSA:
core: Warn on empty module") a warning is issued if it is empty. Fix lack of it. This fixes following warning observed on RaspberryPi 3B board with ARM 32bit kernel and multi_v7_defconfig:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 210 at sound/core/init.c:207 snd_card_new+0x378/0x398 [snd]
Modules linked in: vc4(+) snd_soc_core ac97_bus snd_pcm_dmaengine bluetooth snd_pcm snd_timer crc32_arm_ce raspberrypi_hwmon snd soundcore ecdh_generic ecc bcm2835_thermal phy_generic
CPU: 1 PID: 210 Comm: systemd-udevd Not tainted 5.8.0-rc1-00027-g81033c6b584b #1087
Hardware name: BCM2835
[<c03113c0>] (unwind_backtrace) from [<c030bcb4>] (show_stack+0x10/0x14)
[<c030bcb4>] (show_stack) from [<c071cef8>] (dump_stack+0xd4/0xe8)
[<c071cef8>] (dump_stack) from [<c0345bfc>] (__warn+0xdc/0xf4)
[<c0345bfc>] (__warn) from [<c0345cc4>] (warn_slowpath_fmt+0xb0/0xb8)
[<c0345cc4>] (warn_slowpath_fmt) from [<bf02ff74>] (snd_card_new+0x378/0x398 [snd])
[<bf02ff74>] (snd_card_new [snd]) from [<bf11f0b4>] (snd_soc_bind_card+0x280/0x99c [snd_soc_core])
[<bf11f0b4>] (snd_soc_bind_card [snd_soc_core]) from [<bf12f000>] (devm_snd_soc_register_card+0x34/0x6c [snd_soc_core])
[<bf12f000>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf165654>] (vc4_hdmi_bind+0x43c/0x5f4 [vc4])
[<bf165654>] (vc4_hdmi_bind [vc4]) from [<c09d660c>] (component_bind_all+0xec/0x24c)
[<c09d660c>] (component_bind_all) from [<bf15c44c>] (vc4_drm_bind+0xd4/0x174 [vc4])
[<bf15c44c>] (vc4_drm_bind [vc4]) from [<c09d6ac0>] (try_to_bring_up_master+0x160/0x1b0)
[<c09d6ac0>] (try_to_bring_up_master) from [<c09d6f38>] (component_master_add_with_match+0xd0/0x104)
[<c09d6f38>] (component_master_add_with_match) from [<bf15c588>] (vc4_platform_drm_probe+0x9c/0xbc [vc4])
[<bf15c588>] (vc4_platform_drm_probe [vc4]) from [<c09df740>] (platform_drv_probe+0x6c/0xa4)
[<c09df740>] (platform_drv_probe) from [<c09dd6f0>] (really_probe+0x210/0x350)
[<c09dd6f0>] (really_probe) from [<c09dd940>] (driver_probe_device+0x5c/0xb4)
[<c09dd940>] (driver_probe_device) from [<c09ddb38>] (device_driver_attach+0x58/0x60)
[<c09ddb38>] (device_driver_attach) from [<c09ddbc0>] (__driver_attach+0x80/0xbc)
[<c09ddbc0>] (__driver_attach) from [<c09db820>] (bus_for_each_dev+0x68/0xb4)
[<c09db820>] (bus_for_each_dev) from [<c09dc9f8>] (bus_add_driver+0x130/0x1e8)
[<c09dc9f8>] (bus_add_driver) from [<c09de648>] (driver_register+0x78/0x110)
[<c09de648>] (driver_register) from [<c0302038>] (do_one_initcall+0x50/0x220)
[<c0302038>] (do_one_initcall) from [<c03db544>] (do_init_module+0x60/0x210)
[<c03db544>] (do_init_module) from [<c03da4f8>] (load_module+0x1e34/0x2338)
[<c03da4f8>] (load_module) from [<c03dac00>] (sys_finit_module+0xac/0xbc)
[<c03dac00>] (sys_finit_module) from [<c03000c0>] (ret_fast_syscall+0x0/0x54)
Exception stack(0xeded9fa8 to 0xeded9ff0)
...
---[ end trace 6414689569c2bc08 ]---
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/vc4/vc4_hdmi.c +1 -0
index 8f71157a2b063..3020ae7a8f6b1 100644
@@ -1115,6 +1115,7 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *hdmi)
 	card->num_links = 1;
 	card->name = "vc4-hdmi";
 	card->dev = dev;
+	card->owner = THIS_MODULE;
 
 	/*
 	 * Be careful, snd_soc_register_card() calls dev_set_drvdata() and
Signature · 1 line
2.25.1
author maintainer
#157 lore raw

PATCH 157/166 batman-adv: mcast: fix duplicate mcast packets in BLA backbone from mesh

In reply to Greg Kroah-Hartman

From: Linus Lüssing <[email protected]>

[ Upstream commit 74c09b7275126da1b642b90c9cdc3ae8b729ad4b ]

Scenario:
* Multicast frame send from mesh to a BLA backbone (multiple nodes with their bat0 bridged together, with BLA enabled)

Issue:
* BLA backbone nodes receive the frame multiple times on bat0, once from mesh->bat0 and once from each backbone_gw from LAN

For unicast, a node will send only to the best backbone gateway according to the TQ. However for multicast we currently cannot determine if multiple destination nodes share the same backbone if they don't share the same backbone with us. So we need to keep sending the unicasts to all backbone gateways and let the backbone gateways decide which one will forward the frame. We can use the CLAIM mechanism to make this decision.

One catch: The batman-adv gateway feature for DHCP packets potentially sends multicast packets in the same batman-adv unicast header as the multicast optimizations code. And we are not allowed to drop those even if we did not claim the source address of the sender, as for such packets there is only this one multicast-in-unicast packet.

How can we distinguish the two cases?

The gateway feature uses a batman-adv unicast 4 address header. While the multicast-to-unicasts feature uses a simple, 3 address batman-adv unicast header. So let's use this to distinguish.

Fixes fe2da6ff27c7 ("batman-adv: check incoming packet type for bla")
---
 net/batman-adv/bridge_loop_avoidance.c | 34 +++++++++++++++++++-------
 net/batman-adv/bridge_loop_avoidance.h |  4 +--
 net/batman-adv/soft-interface.c        |  6 ++---
 3 files changed, 30 insertions(+), 14 deletions(-)
net/batman-adv/bridge_loop_avoidance.c +25 -9
index 5b6c2e87e3356..ae1147b8710f3 100644
@@ -1827,7 +1827,7 @@ batadv_bla_loopdetect_check(struct batadv_priv *bat_priv, struct sk_buff *skb,
  * @bat_priv: the bat priv with all the soft interface information
  * @skb: the frame to be checked
  * @vid: the VLAN ID of the frame
- * @is_bcast: the packet came in a broadcast packet type.
+ * @packet_type: the batman packet type this frame came in
  *
  * batadv_bla_rx avoidance checks if:
  *  * we have to race for a claim
@@ -1839,7 +1839,7 @@ batadv_bla_loopdetect_check(struct batadv_priv *bat_priv, struct sk_buff *skb,
  * further process the skb.
  */
 bool batadv_bla_rx(struct batadv_priv *bat_priv, struct sk_buff *skb,
-		   unsigned short vid, bool is_bcast)
+		   unsigned short vid, int packet_type)
 {
 	struct batadv_bla_backbone_gw *backbone_gw;
 	struct ethhdr *ethhdr;
@@ -1861,9 +1861,24 @@ bool batadv_bla_rx(struct batadv_priv *bat_priv, struct sk_buff *skb,
 		goto handled;
 
 	if (unlikely(atomic_read(&bat_priv->bla.num_requests)))
-		/* don't allow broadcasts while requests are in flight */
-		if (is_multicast_ether_addr(ethhdr->h_dest) && is_bcast)
-			goto handled;
+		/* don't allow multicast packets while requests are in flight */
+		if (is_multicast_ether_addr(ethhdr->h_dest))
+			/* Both broadcast flooding or multicast-via-unicasts
+			 * delivery might send to multiple backbone gateways
+			 * sharing the same LAN and therefore need to coordinate
+			 * which backbone gateway forwards into the LAN,
+			 * by claiming the payload source address.
+			 *
+			 * Broadcast flooding and multicast-via-unicasts
+			 * delivery use the following two batman packet types.
+			 * Note: explicitly exclude BATADV_UNICAST_4ADDR,
+			 * as the DHCP gateway feature will send explicitly
+			 * to only one BLA gateway, so the claiming process
+			 * should be avoided there.
+			 */
+			if (packet_type == BATADV_BCAST ||
+			    packet_type == BATADV_UNICAST)
+				goto handled;
 
 	ether_addr_copy(search_claim.addr, ethhdr->h_source);
 	search_claim.vid = vid;
@@ -1898,13 +1913,14 @@ bool batadv_bla_rx(struct batadv_priv *bat_priv, struct sk_buff *skb,
 		goto allow;
 	}
 
-	/* if it is a broadcast ... */
-	if (is_multicast_ether_addr(ethhdr->h_dest) && is_bcast) {
+	/* if it is a multicast ... */
+	if (is_multicast_ether_addr(ethhdr->h_dest) &&
+	    (packet_type == BATADV_BCAST || packet_type == BATADV_UNICAST)) {
 		/* ... drop it. the responsible gateway is in charge.
 		 *
-		 * We need to check is_bcast because with the gateway
+		 * We need to check packet type because with the gateway
 		 * feature, broadcasts (like DHCP requests) may be sent
-		 * using a unicast packet type.
+		 * using a unicast 4 address packet type. See comment above.
 		 */
 		goto handled;
 	} else {
net/batman-adv/bridge_loop_avoidance.h +2 -2
index 234775748b8ea..e05809abf79cd 100644
@@ -47,7 +47,7 @@ static inline bool batadv_bla_is_loopdetect_mac(const uint8_t *mac)
 
 #ifdef CONFIG_BATMAN_ADV_BLA
 bool batadv_bla_rx(struct batadv_priv *bat_priv, struct sk_buff *skb,
-		   unsigned short vid, bool is_bcast);
+		   unsigned short vid, int packet_type);
 bool batadv_bla_tx(struct batadv_priv *bat_priv, struct sk_buff *skb,
 		   unsigned short vid);
 bool batadv_bla_is_backbone_gw(struct sk_buff *skb,
@@ -78,7 +78,7 @@ bool batadv_bla_check_claim(struct batadv_priv *bat_priv, u8 *addr,
 
 static inline bool batadv_bla_rx(struct batadv_priv *bat_priv,
 				 struct sk_buff *skb, unsigned short vid,
-				 bool is_bcast)
+				 int packet_type)
 {
 	return false;
 }
net/batman-adv/soft-interface.c +3 -3
index 7c883420485b8..ba9dce04343a3 100644
@@ -418,10 +418,10 @@ void batadv_interface_rx(struct net_device *soft_iface,
 	struct vlan_ethhdr *vhdr;
 	struct ethhdr *ethhdr;
 	unsigned short vid;
-	bool is_bcast;
+	int packet_type;
 
 	batadv_bcast_packet = (struct batadv_bcast_packet *)skb->data;
-	is_bcast = (batadv_bcast_packet->packet_type == BATADV_BCAST);
+	packet_type = batadv_bcast_packet->packet_type;
 
 	skb_pull_rcsum(skb, hdr_size);
 	skb_reset_mac_header(skb);
@@ -464,7 +464,7 @@ void batadv_interface_rx(struct net_device *soft_iface,
 	/* Let the bridge loop avoidance check the packet. If will
 	 * not handle it, we can safely push it up.
 	 */
-	if (batadv_bla_rx(bat_priv, skb, vid, is_bcast))
+	if (batadv_bla_rx(bat_priv, skb, vid, packet_type))
 		goto out;
 
 	if (orig_node)
Signature · 1 line
2.25.1
author maintainer
#162 lore raw

PATCH 162/166 mm, THP, swap: fix allocating cluster for swapfile by mistake

In reply to Greg Kroah-Hartman

From: Gao Xiang <[email protected]>

commit 41663430588c737dd735bad5a0d1ba325dcabd59 upstream.

SWP_FS is used to make swap_{read,write}page() go through the filesystem, and it's only used for swap files over NFS. So, !SWP_FS means non NFS for now, it could be either file backed or device backed. Something similar goes with legacy SWP_FILE.

So in order to achieve the goal of the original patch, SWP_BLKDEV should be used instead.

FS corruption can be observed with SSD device + XFS + fragmented swapfile due to CONFIG_THP_SWAP=y.

I reproduced the issue with the following details:

Environment:

QEMU + upstream kernel + buildroot + NVMe (2 GB)

Kernel config:

CONFIG_BLK_DEV_NVME=y
CONFIG_THP_SWAP=y

Some reproducible steps:

mkfs.xfs -f /dev/nvme0n1
mkdir /tmp/mnt
mount /dev/nvme0n1 /tmp/mnt
bs="32k"
sz="1024m" # doesn't matter too much, I also tried 16m
xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -F -S 0 -b $bs 0 $sz" -c "fdatasync" /tmp/mnt/sw xfs_io -f -c "pwrite -R -b $bs 0 $sz" -c "fsync" /tmp/mnt/sw

mkswap /tmp/mnt/sw
swapon /tmp/mnt/sw

  stress --vm 2 --vm-bytes 600M   # doesn't matter too much as well

Symptoms:
- FS corruption (e.g. checksum failure)
- memory corruption at: 0xd2808010
- segfault

Fixes f0eea189e8e9 ("mm, THP, swap: Don't allocate huge cluster for file backed swap device")
Fixes 38d8b4e6bdc8 ("mm, THP, swap: delay splitting THP during swap out")
Cc Matthew Wilcox <[email protected]>
Cc Carlos Maiolino <[email protected]>
Cc Eric Sandeen <[email protected]>
Cc Dave Chinner <[email protected]>
---
 mm/swapfile.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
mm/swapfile.c +1 -1
@@ -973,7 +973,7 @@ start_over:
 			goto nextsi;
 		}
 		if (cluster) {
-			if (!(si->flags & SWP_FILE))
+			if (si->flags & SWP_BLKDEV)
 				n_ret = swap_alloc_cluster(si, swp_entries);
 		} else
 			n_ret = scan_swap_map_slots(si, SWAP_HAS_CACHE,
author maintainer
#153 lore raw

PATCH 153/166 mac802154: tx: fix use-after-free

In reply to Greg Kroah-Hartman

From: Eric Dumazet <[email protected]>

[ Upstream commit 0ff4628f4c6c1ab87eef9f16b25355cadc426d64 ]

syzbot reported a bug in ieee802154_tx() [1]

A similar issue in ieee802154_xmit_worker() is also fixed in this patch.

[1]

BUG: KASAN: use-after-free in ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88
Read of size 4 at addr ffff8880251a8c70 by task syz-executor.3/928

CPU: 0 PID: 928 Comm: syz-executor.3 Not tainted 5.9.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x198/0x1fd lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383
 __kasan_report mm/kasan/report.c:513 [inline]
 kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
 ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88
 ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130
 __netdev_start_xmit include/linux/netdevice.h:4634 [inline]
 netdev_start_xmit include/linux/netdevice.h:4648 [inline]
 dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203
 packet_snd net/packet/af_packet.c:2989 [inline]
 packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:671
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45d5b9
Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fc98e749c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000000002ccc0 RCX: 000000000045d5b9
RDX: 0000000000000000 RSI: 0000000020007780 RDI: 000000000000000b
RBP: 000000000118d020 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cfec
R13: 00007fff690c720f R14: 00007fc98e74a9c0 R15: 000000000118cfec

Allocated by task 928:
 kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
 kasan_set_track mm/kasan/common.c:56 [inline]
 __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461
 slab_post_alloc_hook mm/slab.h:518 [inline]
 slab_alloc_node mm/slab.c:3254 [inline]
 kmem_cache_alloc_node+0x136/0x3e0 mm/slab.c:3574
 __alloc_skb+0x71/0x550 net/core/skbuff.c:198
 alloc_skb include/linux/skbuff.h:1094 [inline]
 alloc_skb_with_frags+0x92/0x570 net/core/skbuff.c:5771
 sock_alloc_send_pskb+0x72a/0x880 net/core/sock.c:2348
 packet_alloc_skb net/packet/af_packet.c:2837 [inline]
 packet_snd net/packet/af_packet.c:2932 [inline]
 packet_sendmsg+0x19fb/0x5290 net/packet/af_packet.c:3014
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:671
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 928:
 kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56
 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355
 __kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422
 __cache_free mm/slab.c:3418 [inline]
 kmem_cache_free.part.0+0x74/0x1e0 mm/slab.c:3693
 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:622
 __kfree_skb net/core/skbuff.c:679 [inline]
 consume_skb net/core/skbuff.c:838 [inline]
 consume_skb+0xcf/0x160 net/core/skbuff.c:832
 __dev_kfree_skb_any+0x9c/0xc0 net/core/dev.c:3107
 fakelb_hw_xmit+0x20e/0x2a0 drivers/net/ieee802154/fakelb.c:81
 drv_xmit_async net/mac802154/driver-ops.h:16 [inline]
 ieee802154_tx+0x282/0x480 net/mac802154/tx.c:81
 ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130
 __netdev_start_xmit include/linux/netdevice.h:4634 [inline]
 netdev_start_xmit include/linux/netdevice.h:4648 [inline]
 dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203
 packet_snd net/packet/af_packet.c:2989 [inline]
 packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:671
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The buggy address belongs to the object at ffff8880251a8c00
 which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 112 bytes inside of
 224-byte region [ffff8880251a8c00, ffff8880251a8ce0)
The buggy address belongs to the page:
page:0000000062b6a4f1 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x251a8
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0000435c88 ffffea00028b6c08 ffff8880a9055d00
raw: 0000000000000000 ffff8880251a80c0 000000010000000c 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880251a8b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880251a8b80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8880251a8c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                             ^
 ffff8880251a8c80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff8880251a8d00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
Fixes 409c3b0c5f03 ("mac802154: tx: move stats tx increment")
Cc Alexander Aring <[email protected]>
Cc Stefan Schmidt <[email protected]>
---
 net/mac802154/tx.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
net/mac802154/tx.c +5 -3
index bcd1a5e6ebf42..2f873a0dc5836 100644
@@ -42,11 +42,11 @@ void ieee802154_xmit_worker(struct work_struct *work)
 	if (res)
 		goto err_tx;
 
-	ieee802154_xmit_complete(&local->hw, skb, false);
-
 	dev->stats.tx_packets++;
 	dev->stats.tx_bytes += skb->len;
 
+	ieee802154_xmit_complete(&local->hw, skb, false);
+
 	return;
 
 err_tx:
@@ -86,6 +86,8 @@ ieee802154_tx(struct ieee802154_local *local, struct sk_buff *skb)
 
 	/* async is priority, otherwise sync is fallback */
 	if (local->ops->xmit_async) {
+		unsigned int len = skb->len;
+
 		ret = drv_xmit_async(local, skb);
 		if (ret) {
 			ieee802154_wake_queue(&local->hw);
@@ -93,7 +95,7 @@ ieee802154_tx(struct ieee802154_local *local, struct sk_buff *skb)
 		}
 
 		dev->stats.tx_packets++;
-		dev->stats.tx_bytes += skb->len;
+		dev->stats.tx_bytes += len;
 	} else {
 		local->tx_skb = skb;
 		queue_work(local->workqueue, &local->tx_work);
Signature · 1 line
2.25.1
author maintainer
#164 lore raw

PATCH 164/166 ata: define AC_ERR_OK

In reply to Greg Kroah-Hartman

From: Jiri Slaby <[email protected]>

commit 25937580a5065d6fbd92d9c8ebd47145ad80052e upstream.

Since we will return enum ata_completion_errors from qc_prep in the next patch, let's define AC_ERR_OK to mark the OK status.

---
 include/linux/libata.h |    1 +
 1 file changed, 1 insertion(+)
include/linux/libata.h +1 -0
@@ -504,6 +504,7 @@ enum hsm_task_states {
 };
 
 enum ata_completion_errors {
+	AC_ERR_OK		= 0,	    /* no error */
 	AC_ERR_DEV		= (1 << 0), /* device reported error */
 	AC_ERR_HSM		= (1 << 1), /* host state machine violation */
 	AC_ERR_TIMEOUT		= (1 << 2), /* timeout */
author maintainer
#158 lore raw

PATCH 158/166 ALSA: asihpi: fix iounmap in error handler

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

[ Upstream commit 472eb39103e885f302fd8fd6eff104fcf5503f1b ]

clang static analysis flags this problem hpioctl.c:513:7: warning: Branch condition evaluates to
a garbage value

                if (pci.ap_mem_base[idx]) {
                    ^~~~~~~~~~~~~~~~~~~~

If there is a failure in the middle of the memory space loop, only some of the memory spaces need to be cleaned up.

At the error handler, idx holds the number of successful memory spaces mapped. So rework the handler loop to use the old idx.

There is a second problem, the memory space loop conditionally iomaps()/sets the mem_base so it is necessay to initize pci.

Fixes 719f82d3987a ("ALSA: Add support of AudioScience ASI boards")
---
 sound/pci/asihpi/hpioctl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/pci/asihpi/hpioctl.c +2 -2
index b1a2a7ea41723..b4ccd9f92400e 100644
@@ -350,7 +350,7 @@ int asihpi_adapter_probe(struct pci_dev *pci_dev,
 	struct hpi_message hm;
 	struct hpi_response hr;
 	struct hpi_adapter adapter;
-	struct hpi_pci pci;
+	struct hpi_pci pci = { 0 };
 
 	memset(&adapter, 0, sizeof(adapter));
 
@@ -506,7 +506,7 @@ int asihpi_adapter_probe(struct pci_dev *pci_dev,
 	return 0;
 
 err:
-	for (idx = 0; idx < HPI_MAX_ADAPTER_MEM_SPACES; idx++) {
+	while (--idx >= 0) {
 		if (pci.ap_mem_base[idx]) {
 			iounmap(pci.ap_mem_base[idx]);
 			pci.ap_mem_base[idx] = NULL;
Signature · 1 line
2.25.1
author maintainer
#159 lore raw

PATCH 159/166 MIPS: Add the missing CPU_1074K into __get_cpu_type()

In reply to Greg Kroah-Hartman

From: Wei Li <[email protected]>

[ Upstream commit e393fbe6fa27af23f78df6e16a8fd2963578a8c4 ]

Commit 442e14a2c55e ("MIPS: Add 1074K CPU support explicitly.") split 1074K from the 74K as an unique CPU type, while it missed to add the 'CPU_1074K' in __get_cpu_type(). So let's add it back.

Fixes 442e14a2c55e ("MIPS: Add 1074K CPU support explicitly.")
---
 arch/mips/include/asm/cpu-type.h | 1 +
 1 file changed, 1 insertion(+)
arch/mips/include/asm/cpu-type.h +1 -0
index a45af3de075d9..d43e4ab20b238 100644
@@ -47,6 +47,7 @@ static inline int __pure __get_cpu_type(const int cpu_type)
 	case CPU_34K:
 	case CPU_1004K:
 	case CPU_74K:
+	case CPU_1074K:
 	case CPU_M14KC:
 	case CPU_M14KEC:
 	case CPU_INTERAPTIV:
Signature · 1 line
2.25.1
author maintainer
#156 lore raw

PATCH 156/166 batman-adv: Add missing include for in_interrupt()

In reply to Greg Kroah-Hartman

From: Sven Eckelmann <[email protected]>

[ Upstream commit 4bba9dab86b6ac15ca560ef1f2b5aa4529cbf784 ]

The fix for receiving (internally generated) bla packets outside the interrupt context introduced the usage of in_interrupt(). But this functionality is only defined in linux/preempt.h which was not included with the same patch.

Fixes 279e89b2281a ("batman-adv: bla: use netif_rx_ni when not in interrupt context")
---
 net/batman-adv/bridge_loop_avoidance.c | 1 +
 1 file changed, 1 insertion(+)
net/batman-adv/bridge_loop_avoidance.c +1 -0
index 0f1a77d6aa932..5b6c2e87e3356 100644
@@ -36,6 +36,7 @@
 #include <linux/lockdep.h>
 #include <linux/netdevice.h>
 #include <linux/netlink.h>
+#include <linux/preempt.h>
 #include <linux/rculist.h>
 #include <linux/rcupdate.h>
 #include <linux/seq_file.h>
Signature · 1 line
2.25.1
author maintainer
#115 lore raw

PATCH 115/166 USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()

In reply to Greg Kroah-Hartman

From: Tang Bin <[email protected]>

[ Upstream commit c856b4b0fdb5044bca4c0acf9a66f3b5cc01a37a ]

If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in mv_ehci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here.

---
 drivers/usb/host/ehci-mv.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/usb/host/ehci-mv.c +2 -3
index 849806a75f1ce..273736e1d33fa 100644
@@ -197,9 +197,8 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	hcd->regs = ehci_mv->op_regs;
 
 	hcd->irq = platform_get_irq(pdev, 0);
-	if (!hcd->irq) {
-		dev_err(&pdev->dev, "Cannot get irq.");
-		retval = -ENODEV;
+	if (hcd->irq < 0) {
+		retval = hcd->irq;
 		goto err_disable_clk;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#151 lore raw

PATCH 151/166 atm: eni: fix the missed pci_disable_device() for eni_init_one()

In reply to Greg Kroah-Hartman

From: Jing Xiangfeng <[email protected]>

[ Upstream commit c2b947879ca320ac5505c6c29a731ff17da5e805 ]

eni_init_one() misses to call pci_disable_device() in an error path. Jump to err_disable to fix it.

Fixes ede58ef28e10 ("atm: remove deprecated use of pci api")
---
 drivers/atm/eni.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/atm/eni.c +1 -1
index a106d15f6def0..ba549d9454799 100644
@@ -2243,7 +2243,7 @@ static int eni_init_one(struct pci_dev *pci_dev,
 
 	rc = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32));
 	if (rc < 0)
-		goto out;
+		goto err_disable;
 
 	rc = -ENOMEM;
 	eni_dev = kmalloc(sizeof(struct eni_dev), GFP_KERNEL);
Signature · 1 line
2.25.1
author maintainer
#118 lore raw

PATCH 118/166 powerpc/traps: Make unrecoverable NMIs die instead of panic

In reply to Greg Kroah-Hartman

From: Nicholas Piggin <[email protected]>

[ Upstream commit 265d6e588d87194c2fe2d6c240247f0264e0c19b ]

System Reset and Machine Check interrupts that are not recoverable due to being nested or interrupting when RI=0 currently panic. This is not necessary, and can often just kill the current context and recover.

---
 arch/powerpc/kernel/traps.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/powerpc/kernel/traps.c +3 -3
index 3c9457420aee8..0f1a888c04a84 100644
@@ -357,11 +357,11 @@ out:
 #ifdef CONFIG_PPC_BOOK3S_64
 	BUG_ON(get_paca()->in_nmi == 0);
 	if (get_paca()->in_nmi > 1)
-		nmi_panic(regs, "Unrecoverable nested System Reset");
+		die("Unrecoverable nested System Reset", regs, SIGABRT);
 #endif
 	/* Must die if the interrupt is not recoverable */
 	if (!(regs->msr & MSR_RI))
-		nmi_panic(regs, "Unrecoverable System Reset");
+		die("Unrecoverable System Reset", regs, SIGABRT);
 
 	if (!nested)
 		nmi_exit();
@@ -701,7 +701,7 @@ void machine_check_exception(struct pt_regs *regs)
 
 	/* Must die if the interrupt is not recoverable */
 	if (!(regs->msr & MSR_RI))
-		nmi_panic(regs, "Unrecoverable Machine check");
+		die("Unrecoverable Machine check", regs, SIGBUS);
 
 	return;
 
Signature · 1 line
2.25.1
author maintainer
#127 lore raw

PATCH 127/166 vfio/pci: fix memory leaks of eventfd ctx

In reply to Greg Kroah-Hartman

From: Qian Cai <[email protected]>

[ Upstream commit 1518ac272e789cae8c555d69951b032a275b7602 ]

Finished a qemu-kvm (-device vfio-pci,host=0001:01:00.0) triggers a few memory leaks after a while because vfio_pci_set_ctx_trigger_single() calls eventfd_ctx_fdget() without the matching eventfd_ctx_put() later. Fix it by calling eventfd_ctx_put() for those memory in vfio_pci_release() before vfio_device_release().

unreferenced object 0xebff008981cc2b00 (size 128):
comm "qemu-kvm", pid 4043, jiffies 4294994816 (age 9796.310s) hex dump (first 32 bytes):
01 00 00 00 6b 6b 6b 6b 00 00 00 00 ad 4e ad de ....kkkk.....N.. ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........
backtrace:

    [<00000000917e8f8d>] slab_post_alloc_hook+0x74/0x9c
    [<00000000df0f2aa2>] kmem_cache_alloc_trace+0x2b4/0x3d4
    [<000000005fcec025>] do_eventfd+0x54/0x1ac
    [<0000000082791a69>] __arm64_sys_eventfd2+0x34/0x44
    [<00000000b819758c>] do_el0_svc+0x128/0x1dc
    [<00000000b244e810>] el0_sync_handler+0xd0/0x268
    [<00000000d495ef94>] el0_sync+0x164/0x180

unreferenced object 0x29ff008981cc4180 (size 128):
comm "qemu-kvm", pid 4043, jiffies 4294994818 (age 9796.290s) hex dump (first 32 bytes):
01 00 00 00 6b 6b 6b 6b 00 00 00 00 ad 4e ad de ....kkkk.....N.. ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........
backtrace:

    [<00000000917e8f8d>] slab_post_alloc_hook+0x74/0x9c
    [<00000000df0f2aa2>] kmem_cache_alloc_trace+0x2b4/0x3d4
    [<000000005fcec025>] do_eventfd+0x54/0x1ac
    [<0000000082791a69>] __arm64_sys_eventfd2+0x34/0x44
    [<00000000b819758c>] do_el0_svc+0x128/0x1dc
    [<00000000b244e810>] el0_sync_handler+0xd0/0x268
    [<00000000d495ef94>] el0_sync+0x164/0x180
---
 drivers/vfio/pci/vfio_pci.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/vfio/pci/vfio_pci.c +4 -0
index 794dc90aa5c95..902854a013521 100644
@@ -399,6 +399,10 @@ static void vfio_pci_release(void *device_data)
 	if (!(--vdev->refcnt)) {
 		vfio_spapr_pci_eeh_release(vdev->pdev);
 		vfio_pci_disable(vdev);
+		if (vdev->err_trigger)
+			eventfd_ctx_put(vdev->err_trigger);
+		if (vdev->req_trigger)
+			eventfd_ctx_put(vdev->req_trigger);
 	}
 
 	mutex_unlock(&driver_lock);
Signature · 1 line
2.25.1
author maintainer
#124 lore raw

PATCH 124/166 printk: handle blank console arguments passed in.

In reply to Greg Kroah-Hartman

From: Shreyas Joshi <[email protected]>

[ Upstream commit 48021f98130880dd74286459a1ef48b5e9bc374f ]

If uboot passes a blank string to console_setup then it results in a trashed memory. Ultimately, the kernel crashes during freeing up the memory.

This fix checks if there is a blank parameter being passed to console_setup from uboot. In case it detects that the console parameter is blank then it doesn't setup the serial device and it gracefully exits.

---
 kernel/printk/printk.c | 3 +++
 1 file changed, 3 insertions(+)
kernel/printk/printk.c +3 -0
index 4e50beb162c00..f96b22db5fe70 100644
@@ -2092,6 +2092,9 @@ static int __init console_setup(char *str)
 	char *s, *options, *brl_options = NULL;
 	int idx;
 
+	if (str[0] == 0)
+		return 1;
+
 	if (_braille_console_setup(&str, &brl_options))
 		return 1;
 
Signature · 1 line
2.25.1
author maintainer
#160 lore raw

PATCH 160/166 s390/dasd: Fix zero write for FBA devices

In reply to Greg Kroah-Hartman

From: Jan Höppner <[email protected]>

commit 709192d531e5b0a91f20aa14abfe2fc27ddd47af upstream.

A discard request that writes zeros using the global kernel internal ZERO_PAGE will fail for machines with more than 2GB of memory due to the location of the ZERO_PAGE.

Fix this by using a driver owned global zero page allocated with GFP_DMA flag set.

Fixes 28b841b3a7cb ("s390/dasd: Add discard support for FBA devices")
Cc <[email protected]> # 4.14+
---
 drivers/s390/block/dasd_fba.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/s390/block/dasd_fba.c +8 -1
@@ -39,6 +39,7 @@
 MODULE_LICENSE("GPL");
 
 static struct dasd_discipline dasd_fba_discipline;
+static void *dasd_fba_zero_page;
 
 struct dasd_fba_private {
 	struct dasd_fba_characteristics rdc_data;
@@ -269,7 +270,7 @@ static void ccw_write_zero(struct ccw1 *
 	ccw->cmd_code = DASD_FBA_CCW_WRITE;
 	ccw->flags |= CCW_FLAG_SLI;
 	ccw->count = count;
-	ccw->cda = (__u32) (addr_t) page_to_phys(ZERO_PAGE(0));
+	ccw->cda = (__u32) (addr_t) dasd_fba_zero_page;
 }
 
 /*
@@ -808,6 +809,11 @@ dasd_fba_init(void)
 	int ret;
 
 	ASCEBC(dasd_fba_discipline.ebcname, 4);
+
+	dasd_fba_zero_page = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
+	if (!dasd_fba_zero_page)
+		return -ENOMEM;
+
 	ret = ccw_driver_register(&dasd_fba_driver);
 	if (!ret)
 		wait_for_device_probe();
@@ -819,6 +825,7 @@ static void __exit
 dasd_fba_cleanup(void)
 {
 	ccw_driver_unregister(&dasd_fba_driver);
+	free_page((unsigned long)dasd_fba_zero_page);
 }
 
 module_init(dasd_fba_init);
author maintainer
#125 lore raw

PATCH 125/166 usb: dwc3: Increase timeout for CmdAct cleared by device controller

In reply to Greg Kroah-Hartman

From: Yu Chen <[email protected]>

[ Upstream commit 1c0e69ae1b9f9004fd72978612ae3463791edc56 ]

If the SS PHY is in P3, there is no pipe_clk, HW may use suspend_clk for function, as suspend_clk is slow so EP command need more time to complete, e.g, imx8M suspend_clk is 32K, set ep configuration will take about 380us per below trace time stamp(44.286278 - 44.285897 = 0.000381):

configfs_acm.sh-822 [000] d..1 44.285896: dwc3_writel: addr
000000006d59aae1 value 00000401
configfs_acm.sh-822 [000] d..1 44.285897: dwc3_readl: addr
000000006d59aae1 value 00000401
... ...
configfs_acm.sh-822 [000] d..1 44.286278: dwc3_readl: addr
000000006d59aae1 value 00000001
configfs_acm.sh-822 [000] d..1 44.286279: dwc3_gadget_ep_cmd:
ep0out: cmd 'Set Endpoint Configuration' [401] params 00001000 00000500 00000000 --> status: Successful

This was originally found on Hisilicon Kirin Soc that need more time for the device controller to clear the CmdAct of DEPCMD.

---
 drivers/usb/dwc3/gadget.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/dwc3/gadget.c +1 -1
index 4149d751719e3..4a42368734644 100644
@@ -276,7 +276,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
 {
 	const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
 	struct dwc3		*dwc = dep->dwc;
-	u32			timeout = 1000;
+	u32			timeout = 5000;
 	u32			saved_config = 0;
 	u32			reg;
 
Signature · 1 line
2.25.1
author maintainer
#126 lore raw

PATCH 126/166 btrfs: dont force read-only after error in drop snapshot

In reply to Greg Kroah-Hartman

From: David Sterba <[email protected]>

[ Upstream commit 7c09c03091ac562ddca2b393e5d65c1d37da79f1 ]

Deleting a subvolume on a full filesystem leads to ENOSPC followed by a forced read-only. This is not a transaction abort and the filesystem is otherwise ok, so the error should be just propagated to the callers.

This is caused by unnecessary call to btrfs_handle_fs_error for all errors, except EAGAIN. This does not make sense as the standard transaction abort mechanism is in btrfs_drop_snapshot so all relevant failures are handled.

Originally in commit cb1b69f4508a ("Btrfs: forced readonly when btrfs_drop_snapshot() fails") there was no return value at all, so the btrfs_std_error made some sense but once the error handling and propagation has been implemented we don't need it anymore.

---
 fs/btrfs/extent-tree.c | 2 --
 1 file changed, 2 deletions(-)
fs/btrfs/extent-tree.c +0 -2
index cb46ad4b2b0d1..00481cfe6cfce 100644
@@ -9364,8 +9364,6 @@ out:
 	 */
 	if (!for_reloc && root_dropped == false)
 		btrfs_add_dead_root(root);
-	if (err && err != -EAGAIN)
-		btrfs_handle_fs_error(fs_info, err, NULL);
 	return err;
 }
 
Signature · 1 line
2.25.1
author maintainer
#161 lore raw

PATCH 161/166 kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()

In reply to Greg Kroah-Hartman

From: Masami Hiramatsu <[email protected]>

commit 3031313eb3d549b7ad6f9fbcc52ba04412e3eb9e upstream.

Commit 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler") fixed one bug but not completely fixed yet. If we run a kprobe_module.tc of ftracetest, kernel showed a warning as below.

# ./ftracetest test.d/kprobe/kprobe_module.tc
=== Ftrace unit tests ===
[1] Kprobe dynamic event - probing module
...
[   22.400215] ------------[ cut here ]------------
[   22.400962] Failed to disarm kprobe-ftrace at trace_printk_irq_work+0x0/0x7e [trace_printk] (-2)
[   22.402139] WARNING: CPU: 7 PID: 200 at kernel/kprobes.c:1091 __disarm_kprobe_ftrace.isra.0+0x7e/0xa0
[   22.403358] Modules linked in: trace_printk(-)
[   22.404028] CPU: 7 PID: 200 Comm: rmmod Not tainted 5.9.0-rc2+ #66
[   22.404870] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
[   22.406139] RIP: 0010:__disarm_kprobe_ftrace.isra.0+0x7e/0xa0
[   22.406947] Code: 30 8b 03 eb c9 80 3d e5 09 1f 01 00 75 dc 49 8b 34 24 89 c2 48 c7 c7 a0 c2 05 82 89 45 e4 c6 05 cc 09 1f 01 01 e8 a9 c7 f0 ff <0f> 0b 8b 45 e4 eb b9 89 c6 48 c7 c7 70 c2 05 82 89 45 e4 e8 91 c7
[   22.409544] RSP: 0018:ffffc90000237df0 EFLAGS: 00010286
[   22.410385] RAX: 0000000000000000 RBX: ffffffff83066024 RCX: 0000000000000000
[   22.411434] RDX: 0000000000000001 RSI: ffffffff810de8d3 RDI: ffffffff810de8d3
[   22.412687] RBP: ffffc90000237e10 R08: 0000000000000001 R09: 0000000000000001
[   22.413762] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88807c478640
[   22.414852] R13: ffffffff8235ebc0 R14: ffffffffa00060c0 R15: 0000000000000000
[   22.415941] FS:  00000000019d48c0(0000) GS:ffff88807d7c0000(0000) knlGS:0000000000000000
[   22.417264] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   22.418176] CR2: 00000000005bb7e3 CR3: 0000000078f7a000 CR4: 00000000000006a0
[   22.419309] Call Trace:
[   22.419990]  kill_kprobe+0x94/0x160
[   22.420652]  kprobes_module_callback+0x64/0x230
[   22.421470]  notifier_call_chain+0x4f/0x70
[   22.422184]  blocking_notifier_call_chain+0x49/0x70
[   22.422979]  __x64_sys_delete_module+0x1ac/0x240
[   22.423733]  do_syscall_64+0x38/0x50
[   22.424366]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   22.425176] RIP: 0033:0x4bb81d
[   22.425741] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e0 ff ff ff f7 d8 64 89 01 48
[   22.428726] RSP: 002b:00007ffc70fef008 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
[   22.430169] RAX: ffffffffffffffda RBX: 00000000019d48a0 RCX: 00000000004bb81d
[   22.431375] RDX: 0000000000000000 RSI: 0000000000000880 RDI: 00007ffc70fef028
[   22.432543] RBP: 0000000000000880 R08: 00000000ffffffff R09: 00007ffc70fef320
[   22.433692] R10: 0000000000656300 R11: 0000000000000246 R12: 00007ffc70fef028
[   22.434635] R13: 0000000000000000 R14: 0000000000000002 R15: 0000000000000000
[   22.435682] irq event stamp: 1169
[   22.436240] hardirqs last  enabled at (1179): [<ffffffff810df542>] console_unlock+0x422/0x580
[   22.437466] hardirqs last disabled at (1188): [<ffffffff810df19b>] console_unlock+0x7b/0x580
[   22.438608] softirqs last  enabled at (866): [<ffffffff81c0038e>] __do_softirq+0x38e/0x490
[   22.439637] softirqs last disabled at (859): [<ffffffff81a00f42>] asm_call_on_stack+0x12/0x20
[   22.440690] ---[ end trace 1e7ce7e1e4567276 ]---
[   22.472832] trace_kprobe: This probe might be able to register after target module is loaded. Continue.

This is because the kill_kprobe() calls disarm_kprobe_ftrace() even if the given probe is not enabled. In that case, ftrace_set_filter_ip() fails because the given probe point is not registered to ftrace.

Fix to check the given (going) probe is enabled before invoking disarm_kprobe_ftrace().

Fixes 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler")
Cc Ingo Molnar <[email protected]>
Cc "Naveen N . Rao" <[email protected]>
Cc Anil S Keshavamurthy <[email protected]>
Cc David Miller <[email protected]>
Cc Muchun Song <[email protected]>
Cc Chengming Zhou <[email protected]>
---
 kernel/kprobes.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
kernel/kprobes.c +3 -2
@@ -2140,9 +2140,10 @@ static void kill_kprobe(struct kprobe *p
 
 	/*
 	 * The module is going away. We should disarm the kprobe which
-	 * is using ftrace.
+	 * is using ftrace, because ftrace framework is still available at
+	 * MODULE_STATE_GOING notification.
 	 */
-	if (kprobe_ftrace(p))
+	if (kprobe_ftrace(p) && !kprobe_disabled(p) && !kprobes_all_disarmed)
 		disarm_kprobe_ftrace(p);
 }
 
author maintainer
#148 lore raw

PATCH 148/166 clocksource/drivers/h8300_timer8: Fix wrong return value in h8300_8timer_init()

In reply to Greg Kroah-Hartman

From: Tianjia Zhang <[email protected]>

[ Upstream commit 400d033f5a599120089b5f0c54d14d198499af5a ]

In the init function, if the call to of_iomap() fails, the return value is ENXIO instead of -ENXIO.

Change to the right negative errno.

Fixes 691f8f878290f ("clocksource/drivers/h8300_timer8: Convert init function to return error")
Cc Daniel Lezcano <[email protected]>
---
 drivers/clocksource/h8300_timer8.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clocksource/h8300_timer8.c +1 -1
index 1d740a8c42ab3..47114c2a7cb54 100644
@@ -169,7 +169,7 @@ static int __init h8300_8timer_init(struct device_node *node)
 		return PTR_ERR(clk);
 	}
 
-	ret = ENXIO;
+	ret = -ENXIO;
 	base = of_iomap(node, 0);
 	if (!base) {
 		pr_err("failed to map registers for clockevent\n");
Signature · 1 line
2.25.1
author maintainer
#145 lore raw

PATCH 145/166 objtool: Fix noreturn detection for ignored functions

In reply to Greg Kroah-Hartman

From: Josh Poimboeuf <[email protected]>

[ Upstream commit db6c6a0df840e3f52c84cc302cc1a08ba11a4416 ]

When a function is annotated with STACK_FRAME_NON_STANDARD, objtool doesn't validate its code paths. It also skips sibling call detection within the function.

But sibling call detection is actually needed for the case where the ignored function doesn't have any return instructions. Otherwise objtool naively marks the function as implicit static noreturn, which affects the reachability of its callers, resulting in "unreachable instruction" warnings.

Fix it by just enabling sibling call detection for ignored functions. The 'insn->ignore' check in add_jump_destinations() is no longer needed after

e6da9567959e ("objtool: Don't use ignore flag for fake jumps").

Fixes the following warning:

arch/x86/kvm/vmx/vmx.o: warning: objtool: vmx_handle_exit_irqoff()+0x142: unreachable instruction

which triggers on an allmodconfig with CONFIG_GCOV_KERNEL unset.

---
 tools/objtool/check.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/objtool/check.c +1 -1
index 247fbb5f6a389..2c8e2dae17016 100644
@@ -502,7 +502,7 @@ static int add_jump_destinations(struct objtool_file *file)
 		    insn->type != INSN_JUMP_UNCONDITIONAL)
 			continue;
 
-		if (insn->ignore || insn->offset == FAKE_JUMP_OFFSET)
+		if (insn->offset == FAKE_JUMP_OFFSET)
 			continue;
 
 		rela = find_rela_by_dest_range(insn->sec, insn->offset,
Signature · 1 line
2.25.1
author maintainer
#146 lore raw

PATCH 146/166 ieee802154: fix one possible memleak in ca8210_dev_com_init

In reply to Greg Kroah-Hartman

From: Liu Jian <[email protected]>

[ Upstream commit 88f46b3fe2ac41c381770ebad9f2ee49346b57a2 ]

We should call destroy_workqueue to destroy mlme_workqueue in error branch.

Fixes ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
---
 drivers/net/ieee802154/ca8210.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ieee802154/ca8210.c +1 -0
index 3a58962babd41..368369469e321 100644
@@ -2924,6 +2924,7 @@ static int ca8210_dev_com_init(struct ca8210_priv *priv)
 	);
 	if (!priv->irq_workqueue) {
 		dev_crit(&priv->spi->dev, "alloc of irq_workqueue failed!\n");
+		destroy_workqueue(priv->mlme_workqueue);
 		return -ENOMEM;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#122 lore raw

PATCH 122/166 e1000: Do not perform reset in reset_task if we are already down

In reply to Greg Kroah-Hartman

From: Alexander Duyck <[email protected]>

[ Upstream commit 49ee3c2ab5234757bfb56a0b3a3cb422f427e3a3 ]

We are seeing a deadlock in e1000 down when NAPI is being disabled. Looking over the kernel function trace of the system it appears that the interface is being closed and then a reset is hitting which deadlocks the interface as the NAPI interface is already disabled.

To prevent this from happening I am disabling the reset task when __E1000_DOWN is already set. In addition code has been added so that we set the __E1000_DOWN while holding the __E1000_RESET flag in e1000_close in order to guarantee that the reset task will not run after we have started the close call.

---
 drivers/net/ethernet/intel/e1000/e1000_main.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
drivers/net/ethernet/intel/e1000/e1000_main.c +14 -4
index 175681aa52607..8cc0e48738152 100644
@@ -567,8 +567,13 @@ void e1000_reinit_locked(struct e1000_adapter *adapter)
 	WARN_ON(in_interrupt());
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
 		msleep(1);
-	e1000_down(adapter);
-	e1000_up(adapter);
+
+	/* only run the task if not already down */
+	if (!test_bit(__E1000_DOWN, &adapter->flags)) {
+		e1000_down(adapter);
+		e1000_up(adapter);
+	}
+
 	clear_bit(__E1000_RESETTING, &adapter->flags);
 }
 
@@ -1458,10 +1463,15 @@ int e1000_close(struct net_device *netdev)
 	struct e1000_hw *hw = &adapter->hw;
 	int count = E1000_CHECK_RESET_COUNT;
 
-	while (test_bit(__E1000_RESETTING, &adapter->flags) && count--)
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->flags) && count--)
 		usleep_range(10000, 20000);
 
-	WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+	WARN_ON(count < 0);
+
+	/* signal that we're down so that the reset task will no longer run */
+	set_bit(__E1000_DOWN, &adapter->flags);
+	clear_bit(__E1000_RESETTING, &adapter->flags);
+
 	e1000_down(adapter);
 	e1000_power_down_phy(adapter);
 	e1000_free_irq(adapter);
Signature · 1 line
2.25.1
author maintainer
#149 lore raw

PATCH 149/166 mwifiex: Increase AES key storage size to 256 bits

In reply to Greg Kroah-Hartman

From: Maximilian Luz <[email protected]>

[ Upstream commit 4afc850e2e9e781976fb2c7852ce7bac374af938 ]

Following commit e18696786548 ("mwifiex: Prevent memory corruption handling keys") the mwifiex driver fails to authenticate with certain networks, specifically networks with 256 bit keys, and repeatedly asks for the password. The kernel log repeats the following lines (id and bssid redacted):

mwifiex_pcie 0000:01:00.0: info: trying to associate to '<id>' bssid <bssid> mwifiex_pcie 0000:01:00.0: info: associated to bssid <bssid> successfully mwifiex_pcie 0000:01:00.0: crypto keys added
mwifiex_pcie 0000:01:00.0: info: successfully disconnected from <bssid>: reason code 3

Tracking down this problem lead to the overflow check introduced by the aforementioned commit into mwifiex_ret_802_11_key_material_v2(). This check fails on networks with 256 bit keys due to the current storage size for AES keys in struct mwifiex_aes_param being only 128 bit.

To fix this issue, increase the storage size for AES keys to 256 bit.

---
 drivers/net/wireless/marvell/mwifiex/fw.h          | 2 +-
 drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/net/wireless/marvell/mwifiex/fw.h +1 -1
index 342555ebafd79..1d86d29b64ccc 100644
@@ -938,7 +938,7 @@ struct mwifiex_tkip_param {
 struct mwifiex_aes_param {
 	u8 pn[WPA_PN_SIZE];
 	__le16 key_len;
-	u8 key[WLAN_KEY_LEN_CCMP];
+	u8 key[WLAN_KEY_LEN_CCMP_256];
 } __packed;
 
 struct mwifiex_wapi_param {
drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c +2 -2
index 19ce279df24d9..1aeb8cf6dff97 100644
@@ -624,7 +624,7 @@ static int mwifiex_ret_802_11_key_material_v2(struct mwifiex_private *priv,
 	key_v2 = &resp->params.key_material_v2;
 
 	len = le16_to_cpu(key_v2->key_param_set.key_params.aes.key_len);
-	if (len > WLAN_KEY_LEN_CCMP)
+	if (len > sizeof(key_v2->key_param_set.key_params.aes.key))
 		return -EINVAL;
 
 	if (le16_to_cpu(key_v2->action) == HostCmd_ACT_GEN_SET) {
@@ -640,7 +640,7 @@ static int mwifiex_ret_802_11_key_material_v2(struct mwifiex_private *priv,
 		return 0;
 
 	memset(priv->aes_key_v2.key_param_set.key_params.aes.key, 0,
-	       WLAN_KEY_LEN_CCMP);
+	       sizeof(key_v2->key_param_set.key_params.aes.key));
 	priv->aes_key_v2.key_param_set.key_params.aes.key_len =
 				cpu_to_le16(len);
 	memcpy(priv->aes_key_v2.key_param_set.key_params.aes.key,
Signature · 1 line
2.25.1
author maintainer
#123 lore raw

PATCH 123/166 drm/nouveau/debugfs: fix runtime pm imbalance on error

In reply to Greg Kroah-Hartman

From: Dinghao Liu <[email protected]>

[ Upstream commit 00583fbe8031f69bba8b0a9a861efb75fb7131af ]

pm_runtime_get_sync() increments the runtime PM usage counter even the call returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

---
 drivers/gpu/drm/nouveau/nouveau_debugfs.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/gpu/drm/nouveau/nouveau_debugfs.c +4 -1
index 9635704a1d864..4561a786fab07 100644
@@ -161,8 +161,11 @@ nouveau_debugfs_pstate_set(struct file *file, const char __user *ubuf,
 	}
 
 	ret = pm_runtime_get_sync(drm->dev);
-	if (ret < 0 && ret != -EACCES)
+	if (ret < 0 && ret != -EACCES) {
+		pm_runtime_put_autosuspend(drm->dev);
 		return ret;
+	}
+
 	ret = nvif_mthd(ctrl, NVIF_CONTROL_PSTATE_USER, &args, sizeof(args));
 	pm_runtime_put_autosuspend(drm->dev);
 	if (ret < 0)
Signature · 1 line
2.25.1
author maintainer
#144 lore raw

PATCH 144/166 i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

[ Upstream commit 21653a4181ff292480599dad996a2b759ccf050f ]

Some ACPI i2c-devices _STA method (which is used to detect if the device is present) use autodetection code which probes which device is present over i2c. This requires the I2C ACPI OpRegion handler to be registered before we enumerate i2c-clients under the i2c-adapter.

This fixes the i2c touchpad on the Lenovo ThinkBook 14-IIL and ThinkBook 15 IIL not getting an i2c-client instantiated and thus not working.

---
 drivers/i2c/i2c-core-base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/i2c-core-base.c +1 -1
index 7b961c9c62eff..9f2aa45560e62 100644
@@ -1280,8 +1280,8 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 
 	/* create pre-declared device nodes */
 	of_i2c_register_devices(adap);
-	i2c_acpi_register_devices(adap);
 	i2c_acpi_install_space_handler(adap);
+	i2c_acpi_register_devices(adap);
 
 	if (adap->nr < __i2c_first_dynamic_bus_num)
 		i2c_scan_static_board_info(adap);
Signature · 1 line
2.25.1
author maintainer
#147 lore raw

PATCH 147/166 ieee802154/adf7242: check status of adf7242_read_reg

In reply to Greg Kroah-Hartman

From: Tom Rix <[email protected]>

[ Upstream commit e3914ed6cf44bfe1f169e26241f8314556fd1ac1 ]

Clang static analysis reports this error

adf7242.c:887:6: warning: Assigned value is garbage or undefined

        len = len_u8;
            ^ ~~~~~~

len_u8 is set in

       adf7242_read_reg(lp, 0, &len_u8);

When this call fails, len_u8 is not set.

So check the return code.

Fixes 7302b9d90117 ("ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154")
---
 drivers/net/ieee802154/adf7242.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/ieee802154/adf7242.c +3 -1
index 46b42de13d76f..3510eb26ccd55 100644
@@ -834,7 +834,9 @@ static int adf7242_rx(struct adf7242_local *lp)
 	int ret;
 	u8 lqi, len_u8, *data;
 
-	adf7242_read_reg(lp, 0, &len_u8);
+	ret = adf7242_read_reg(lp, 0, &len_u8);
+	if (ret)
+		return ret;
 
 	len = len_u8;
 
Signature · 1 line
2.25.1
author maintainer
#143 lore raw

PATCH 143/166 s390/init: add missing __init annotations

In reply to Greg Kroah-Hartman

From: Ilya Leoshkevich <[email protected]>

[ Upstream commit fcb2b70cdb194157678fb1a75f9ff499aeba3d2a ]

Add __init to reserve_memory_end, reserve_oldmem and remove_oldmem. Sometimes these functions are not inlined, and then the build complains about section mismatch.

---
 arch/s390/kernel/setup.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/s390/kernel/setup.c +3 -3
index 5c2558cc6977a..42025e33a4e07 100644
@@ -540,7 +540,7 @@ static struct notifier_block kdump_mem_nb = {
 /*
  * Make sure that the area behind memory_end is protected
  */
-static void reserve_memory_end(void)
+static void __init reserve_memory_end(void)
 {
 #ifdef CONFIG_CRASH_DUMP
 	if (ipl_info.type == IPL_TYPE_FCP_DUMP &&
@@ -558,7 +558,7 @@ static void reserve_memory_end(void)
 /*
  * Make sure that oldmem, where the dump is stored, is protected
  */
-static void reserve_oldmem(void)
+static void __init reserve_oldmem(void)
 {
 #ifdef CONFIG_CRASH_DUMP
 	if (OLDMEM_BASE)
@@ -570,7 +570,7 @@ static void reserve_oldmem(void)
 /*
  * Make sure that oldmem, where the dump is stored, is protected
  */
-static void remove_oldmem(void)
+static void __init remove_oldmem(void)
 {
 #ifdef CONFIG_CRASH_DUMP
 	if (OLDMEM_BASE)
Signature · 1 line
2.25.1
author maintainer
#133 lore raw

PATCH 133/166 rapidio: avoid data race between file operation callbacks and mport_cdev_add().

In reply to Greg Kroah-Hartman

From: Madhuparna Bhowmik <[email protected]>

[ Upstream commit e1c3cdb26ab881b77486dc50370356a349077c74 ]

Fields of md(mport_dev) are set after cdev_device_add(). However, the file operation callbacks can be called after cdev_device_add() and therefore accesses to fields of md in the callbacks can race with the rest of the mport_cdev_add() function.

One such example is INIT_LIST_HEAD(&md->portwrites) in mport_cdev_add(), the list is initialised after cdev_device_add(). This can race with list_add_tail(&pw_filter->md_node,&md->portwrites) in rio_mport_add_pw_filter() which is called by unlocked_ioctl.

To avoid such data races use cdev_device_add() after initializing md.

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/rapidio/devices/rio_mport_cdev.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/rapidio/devices/rio_mport_cdev.c +7 -7
index f15f6d1e1070a..f207f8725993c 100644
@@ -2464,13 +2464,6 @@ static struct mport_dev *mport_cdev_add(struct rio_mport *mport)
 	cdev_init(&md->cdev, &mport_fops);
 	md->cdev.owner = THIS_MODULE;
 
-	ret = cdev_device_add(&md->cdev, &md->dev);
-	if (ret) {
-		rmcd_error("Failed to register mport %d (err=%d)",
-		       mport->id, ret);
-		goto err_cdev;
-	}
-
 	INIT_LIST_HEAD(&md->doorbells);
 	spin_lock_init(&md->db_lock);
 	INIT_LIST_HEAD(&md->portwrites);
@@ -2490,6 +2483,13 @@ static struct mport_dev *mport_cdev_add(struct rio_mport *mport)
 #else
 	md->properties.transfer_mode |= RIO_TRANSFER_MODE_TRANSFER;
 #endif
+
+	ret = cdev_device_add(&md->cdev, &md->dev);
+	if (ret) {
+		rmcd_error("Failed to register mport %d (err=%d)",
+		       mport->id, ret);
+		goto err_cdev;
+	}
 	ret = rio_query_mport(mport, &attr);
 	if (!ret) {
 		md->properties.flags = attr.flags;
Signature · 1 line
2.25.1
author maintainer
#139 lore raw

PATCH 139/166 scsi: libfc: Skip additional kref updating work event

In reply to Greg Kroah-Hartman

From: Javed Hasan <[email protected]>

[ Upstream commit 823a65409c8990f64c5693af98ce0e7819975cba ]

When an rport event (RPORT_EV_READY) is updated without work being queued, avoid taking an additional reference.

This issue was leading to memory leak. Trace from KMEMLEAK tool:

unreferenced object 0xffff8888259e8780 (size 512):
comm "kworker/2:1", jiffies 4433237386 (age 113021.971s)

    hex dump (first 32 bytes):
	58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00
	01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10
  backtrace:
  [<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc]
  [<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc]
  [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
  [<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
  [<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf]
  [<00000000e0eb6893>] process_one_work+0x382/0x6c0
  [<000000002dfd9e21>] worker_thread+0x57/0x5c0
  [<00000000b648204f>] kthread+0x1a0/0x1c0
  [<0000000072f5ab20>] ret_from_fork+0x35/0x40
  [<000000001d5c05d8>] 0xffffffffffffffff

Below is the log sequence which leads to memory leak. Here we get the RPORT_EV_READY and RPORT_EV_STOP back to back, which lead to overwrite the event RPORT_EV_READY by event RPORT_EV_STOP. Because of this, kref_count gets incremented by 1.

kernel: host0: rport fffce5: Received PLOGI request
kernel: host0: rport fffce5: Received PLOGI in INIT state
kernel: host0: rport fffce5: Port is Ready
kernel: host0: rport fffce5: Received PRLI request while in state Ready
kernel: host0: rport fffce5: PRLI rspp type 8 active 1 passive 0
kernel: host0: rport fffce5: Received LOGO request while in state Ready
kernel: host0: rport fffce5: Delete port
kernel: host0: rport fffce5: Received PLOGI request
kernel: host0: rport fffce5: Received PLOGI in state Delete - send busy
kernel: host0: rport fffce5: work event 3
kernel: host0: rport fffce5: lld callback ev 3
kernel: host0: rport fffce5: work delete

---
 drivers/scsi/libfc/fc_rport.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/scsi/libfc/fc_rport.c +5 -4
index a9137f64befa0..669cf3553a77d 100644
@@ -495,10 +495,11 @@ static void fc_rport_enter_delete(struct fc_rport_priv *rdata,
 
 	fc_rport_state_enter(rdata, RPORT_ST_DELETE);
 
-	kref_get(&rdata->kref);
-	if (rdata->event == RPORT_EV_NONE &&
-	    !queue_work(rport_event_queue, &rdata->event_work))
-		kref_put(&rdata->kref, fc_rport_destroy);
+	if (rdata->event == RPORT_EV_NONE) {
+		kref_get(&rdata->kref);
+		if (!queue_work(rport_event_queue, &rdata->event_work))
+			kref_put(&rdata->kref, fc_rport_destroy);
+	}
 
 	rdata->event = event;
 }
Signature · 1 line
2.25.1
author maintainer
#132 lore raw

PATCH 132/166 mm/swap_state: fix a data race in swapin_nr_pages

In reply to Greg Kroah-Hartman

From: Qian Cai <[email protected]>

[ Upstream commit d6c1f098f2a7ba62627c9bc17cda28f534ef9e4a ]

"prev_offset" is a static variable in swapin_nr_pages() that can be accessed concurrently with only mmap_sem held in read mode as noticed by KCSAN,

 BUG: KCSAN: data-race in swap_cluster_readahead / swap_cluster_readahead

write to 0xffffffff92763830 of 8 bytes by task 14795 on cpu 17:

  swap_cluster_readahead+0x2a6/0x5e0
  swapin_readahead+0x92/0x8dc
  do_swap_page+0x49b/0xf20
  __handle_mm_fault+0xcfb/0xd70
  handle_mm_fault+0xfc/0x2f0
  do_page_fault+0x263/0x715
  page_fault+0x34/0x40

1 lock held by (dnf)/14795:
#0: ffff897bd2e98858 (&mm->mmap_sem#2){++++}-{3:3}, at: do_page_fault+0x143/0x715 do_user_addr_fault at arch/x86/mm/fault.c:1405
(inlined by) do_page_fault at arch/x86/mm/fault.c:1535

 irq event stamp: 83493
 count_memcg_event_mm+0x1a6/0x270
 count_memcg_event_mm+0x119/0x270
 __do_softirq+0x365/0x589
 irq_exit+0xa2/0xc0

read to 0xffffffff92763830 of 8 bytes by task 1 on cpu 22:

  swap_cluster_readahead+0xfd/0x5e0
  swapin_readahead+0x92/0x8dc
  do_swap_page+0x49b/0xf20
  __handle_mm_fault+0xcfb/0xd70
  handle_mm_fault+0xfc/0x2f0
  do_page_fault+0x263/0x715
  page_fault+0x34/0x40

1 lock held by systemd/1:
#0: ffff897c38f14858 (&mm->mmap_sem#2){++++}-{3:3}, at: do_page_fault+0x143/0x715

 irq event stamp: 43530289
 count_memcg_event_mm+0x1a6/0x270
 count_memcg_event_mm+0x119/0x270
 __do_softirq+0x365/0x589
 irq_exit+0xa2/0xc0
---
 mm/swap_state.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
mm/swap_state.c +3 -2
index 755be95d52f9c..3ceea86818bd4 100644
@@ -524,10 +524,11 @@ static unsigned long swapin_nr_pages(unsigned long offset)
 		return 1;
 
 	hits = atomic_xchg(&swapin_readahead_hits, 0);
-	pages = __swapin_nr_pages(prev_offset, offset, hits, max_pages,
+	pages = __swapin_nr_pages(READ_ONCE(prev_offset), offset, hits,
+				  max_pages,
 				  atomic_read(&last_readahead_pages));
 	if (!hits)
-		prev_offset = offset;
+		WRITE_ONCE(prev_offset, offset);
 	atomic_set(&last_readahead_pages, pages);
 
 	return pages;
Signature · 1 line
2.25.1
author maintainer
#129 lore raw

PATCH 129/166 perf kcore_copy: Fix module map when there are no modules loaded

In reply to Greg Kroah-Hartman

From: Adrian Hunter <[email protected]>

[ Upstream commit 61f82e3fb697a8e85f22fdec786528af73dc36d1 ]

In the absence of any modules, no "modules" map is created, but there are other executable pages to map, due to eBPF JIT, kprobe or ftrace. Map them by recognizing that the first "module" symbol is not necessarily from a module, and adjust the map accordingly.

Cc Alexander Shishkin <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Leo Yan <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Masami Hiramatsu <[email protected]>
Cc Mathieu Poirier <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Steven Rostedt (VMware) <[email protected]>
---
 tools/perf/util/symbol-elf.c | 7 +++++++
 1 file changed, 7 insertions(+)
tools/perf/util/symbol-elf.c +7 -0
index 3d39332b3a06a..a0a4afa7e6781 100644
@@ -1420,6 +1420,7 @@ struct kcore_copy_info {
 	u64 first_symbol;
 	u64 last_symbol;
 	u64 first_module;
+	u64 first_module_symbol;
 	u64 last_module_symbol;
 	struct phdr_data kernel_map;
 	struct phdr_data modules_map;
@@ -1434,6 +1435,8 @@ static int kcore_copy__process_kallsyms(void *arg, const char *name, char type,
 		return 0;
 
 	if (strchr(name, '[')) {
+		if (!kci->first_module_symbol || start < kci->first_module_symbol)
+			kci->first_module_symbol = start;
 		if (start > kci->last_module_symbol)
 			kci->last_module_symbol = start;
 		return 0;
@@ -1558,6 +1561,10 @@ static int kcore_copy__calc_maps(struct kcore_copy_info *kci, const char *dir,
 		kci->etext += page_size;
 	}
 
+	if (kci->first_module_symbol &&
+	    (!kci->first_module || kci->first_module_symbol < kci->first_module))
+		kci->first_module = kci->first_module_symbol;
+
 	kci->first_module = round_down(kci->first_module, page_size);
 
 	if (kci->last_module_symbol) {
Signature · 1 line
2.25.1
author maintainer
#137 lore raw

PATCH 137/166 cifs: Fix double add page to memcg when cifs_readpages

In reply to Greg Kroah-Hartman

From: Zhang Xiaoxu <[email protected]>

[ Upstream commit 95a3d8f3af9b0d63b43f221b630beaab9739d13a ]

When xfstests generic/451, there is an BUG at mm/memcontrol.c:
page:ffffea000560f2c0 refcount:2 mapcount:0 mapping:000000008544e0ea

       index:0xf
  mapping->aops:cifs_addr_ops dentry name:"tst-aio-dio-cycle-write.451"
  flags: 0x2fffff80000001(locked)
  raw: 002fffff80000001 ffffc90002023c50 ffffea0005280088 ffff88815cda0210
  raw: 000000000000000f 0000000000000000 00000002ffffffff ffff88817287d000
  page dumped because: VM_BUG_ON_PAGE(page->mem_cgroup)
  page->mem_cgroup:ffff88817287d000
  ------------[ cut here ]------------
  kernel BUG at mm/memcontrol.c:2659!
  invalid opcode: 0000 [#1] SMP
  CPU: 2 PID: 2038 Comm: xfs_io Not tainted 5.8.0-rc1 #44
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_
    073836-buildvm-ppc64le-16.ppc.4
  RIP: 0010:commit_charge+0x35/0x50
  Code: 0d 48 83 05 54 b2 02 05 01 48 89 77 38 c3 48 c7
        c6 78 4a ea ba 48 83 05 38 b2 02 05 01 e8 63 0d9
  RSP: 0018:ffffc90002023a50 EFLAGS: 00010202
  RAX: 0000000000000000 RBX: ffff88817287d000 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: ffff88817ac97ea0 RDI: ffff88817ac97ea0
  RBP: ffffea000560f2c0 R08: 0000000000000203 R09: 0000000000000005
  R10: 0000000000000030 R11: ffffc900020237a8 R12: 0000000000000000
  R13: 0000000000000001 R14: 0000000000000001 R15: ffff88815a1272c0
  FS:  00007f5071ab0800(0000) GS:ffff88817ac80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 000055efcd5ca000 CR3: 000000015d312000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   mem_cgroup_charge+0x166/0x4f0
   __add_to_page_cache_locked+0x4a9/0x710
   add_to_page_cache_locked+0x15/0x20
   cifs_readpages+0x217/0x1270
   read_pages+0x29a/0x670
   page_cache_readahead_unbounded+0x24f/0x390
   __do_page_cache_readahead+0x3f/0x60
   ondemand_readahead+0x1f1/0x470
   page_cache_async_readahead+0x14c/0x170
   generic_file_buffered_read+0x5df/0x1100
   generic_file_read_iter+0x10c/0x1d0
   cifs_strict_readv+0x139/0x170
   new_sync_read+0x164/0x250
   __vfs_read+0x39/0x60
   vfs_read+0xb5/0x1e0
   ksys_pread64+0x85/0xf0
   __x64_sys_pread64+0x22/0x30
   do_syscall_64+0x69/0x150
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f5071fcb1af
  Code: Bad RIP value.
  RSP: 002b:00007ffde2cdb8e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000011
  RAX: ffffffffffffffda RBX: 00007ffde2cdb990 RCX: 00007f5071fcb1af
  RDX: 0000000000001000 RSI: 000055efcd5ca000 RDI: 0000000000000003
  RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000001000 R11: 0000000000000293 R12: 0000000000000001
  R13: 000000000009f000 R14: 0000000000000000 R15: 0000000000001000
  Modules linked in:
  ---[ end trace 725fa14a3e1af65c ]---

Since commit 3fea5a499d57 ("mm: memcontrol: convert page cache to a new mem_cgroup_charge() API") not cancel the page charge, the pages maybe double add to pagecache:
thread1 | thread2
cifs_readpages
readpages_get_pages
add_to_page_cache_locked(head,index=n)=0

                              | readpages_get_pages
                              | add_to_page_cache_locked(head,index=n+1)=0

add_to_page_cache_locked(head, index=n+1)=-EEXIST then, will next loop with list head page's index=n+1 and the page->mapping not NULL
readpages_get_pages add_to_page_cache_locked(head, index=n+1)
commit_charge
VM_BUG_ON_PAGE

So, we should not do the next loop when any page add to page cache failed.

---
 fs/cifs/file.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
fs/cifs/file.c +7 -4
index 0981731132ec0..6c77a96437e61 100644
@@ -3753,7 +3753,8 @@ readpages_get_pages(struct address_space *mapping, struct list_head *page_list,
 			break;
 
 		__SetPageLocked(page);
-		if (add_to_page_cache_locked(page, mapping, page->index, gfp)) {
+		rc = add_to_page_cache_locked(page, mapping, page->index, gfp);
+		if (rc) {
 			__ClearPageLocked(page);
 			break;
 		}
@@ -3769,6 +3770,7 @@ static int cifs_readpages(struct file *file, struct address_space *mapping,
 	struct list_head *page_list, unsigned num_pages)
 {
 	int rc;
+	int err = 0;
 	struct list_head tmplist;
 	struct cifsFileInfo *open_file = file->private_data;
 	struct cifs_sb_info *cifs_sb = CIFS_FILE_SB(file);
@@ -3809,7 +3811,7 @@ static int cifs_readpages(struct file *file, struct address_space *mapping,
 	 * the order of declining indexes. When we put the pages in
 	 * the rdata->pages, then we want them in increasing order.
 	 */
-	while (!list_empty(page_list)) {
+	while (!list_empty(page_list) && !err) {
 		unsigned int i, nr_pages, bytes, rsize;
 		loff_t offset;
 		struct page *page, *tpage;
@@ -3832,9 +3834,10 @@ static int cifs_readpages(struct file *file, struct address_space *mapping,
 			return 0;
 		}
 
-		rc = readpages_get_pages(mapping, page_list, rsize, &tmplist,
+		nr_pages = 0;
+		err = readpages_get_pages(mapping, page_list, rsize, &tmplist,
 					 &nr_pages, &offset, &bytes);
-		if (rc) {
+		if (!nr_pages) {
 			add_credits_and_wake_if(server, credits, 0);
 			break;
 		}
Signature · 1 line
2.25.1
author maintainer
#134 lore raw

PATCH 134/166 mtd: parser: cmdline: Support MTD names containing one or more colons

In reply to Greg Kroah-Hartman

From: Boris Brezillon <[email protected]>

[ Upstream commit eb13fa0227417e84aecc3bd9c029d376e33474d3 ]

Looks like some drivers define MTD names with a colon in it, thus making mtdpart= parsing impossible. Let's fix the parser to gracefully handle that case: the last ':' in a partition definition sequence is considered instead of the first one.

---
 drivers/mtd/cmdlinepart.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)
drivers/mtd/cmdlinepart.c +20 -3
index fbd5affc0acfe..04fd845de05fb 100644
@@ -228,12 +228,29 @@ static int mtdpart_setup_real(char *s)
 		struct cmdline_mtd_partition *this_mtd;
 		struct mtd_partition *parts;
 		int mtd_id_len, num_parts;
-		char *p, *mtd_id;
+		char *p, *mtd_id, *semicol;
+
+		/*
+		 * Replace the first ';' by a NULL char so strrchr can work
+		 * properly.
+		 */
+		semicol = strchr(s, ';');
+		if (semicol)
+			*semicol = '\0';
 
 		mtd_id = s;
 
-		/* fetch <mtd-id> */
-		p = strchr(s, ':');
+		/*
+		 * fetch <mtd-id>. We use strrchr to ignore all ':' that could
+		 * be present in the MTD name, only the last one is interpreted
+		 * as an <mtd-id>/<part-definition> separator.
+		 */
+		p = strrchr(s, ':');
+
+		/* Restore the ';' now. */
+		if (semicol)
+			*semicol = ';';
+
 		if (!p) {
 			pr_err("no mtd-id\n");
 			return -EINVAL;
Signature · 1 line
2.25.1
author maintainer
#120 lore raw

PATCH 120/166 USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned int

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

[ Upstream commit a7f40c233a6b0540d28743267560df9cfb571ca9 ]

The comparison of hcd->irq to less than zero for an error check will never be true because hcd->irq is an unsigned int. Fix this by assigning the int retval to the return of platform_get_irq and checking this for the -ve error condition and assigning hcd->irq to retval.

Addresses-Coverity: ("Unsigned compared against 0")

Fixes c856b4b0fdb5 ("USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()")
---
 drivers/usb/host/ehci-mv.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/usb/host/ehci-mv.c +3 -4
index 273736e1d33fa..b29610899c9f6 100644
@@ -196,11 +196,10 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	hcd->rsrc_len = resource_size(r);
 	hcd->regs = ehci_mv->op_regs;
 
-	hcd->irq = platform_get_irq(pdev, 0);
-	if (hcd->irq < 0) {
-		retval = hcd->irq;
+	retval = platform_get_irq(pdev, 0);
+	if (retval < 0)
 		goto err_disable_clk;
-	}
+	hcd->irq = retval;
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = (struct ehci_caps *) ehci_mv->cap_regs;
Signature · 1 line
2.25.1
author maintainer
#135 lore raw

PATCH 135/166 x86/speculation/mds: Mark mds_user_clear_cpu_buffers() __always_inline

In reply to Greg Kroah-Hartman

From: Thomas Gleixner <[email protected]>

[ Upstream commit a7ef9ba986b5fae9d80f8a7b31db0423687efe4e ]

Prevent the compiler from uninlining and creating traceable/probable functions as this is invoked _after_ context tracking switched to CONTEXT_USER and rcu idle.

---
 arch/x86/include/asm/nospec-branch.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/include/asm/nospec-branch.h +2 -2
index 041d2a04be1d8..270448b178a7a 100644
@@ -330,7 +330,7 @@ DECLARE_STATIC_KEY_FALSE(mds_idle_clear);
  * combination with microcode which triggers a CPU buffer flush when the
  * instruction is executed.
  */
-static inline void mds_clear_cpu_buffers(void)
+static __always_inline void mds_clear_cpu_buffers(void)
 {
 	static const u16 ds = __KERNEL_DS;
 
@@ -351,7 +351,7 @@ static inline void mds_clear_cpu_buffers(void)
  *
  * Clear CPU buffers if the corresponding static key is enabled
  */
-static inline void mds_user_clear_cpu_buffers(void)
+static __always_inline void mds_user_clear_cpu_buffers(void)
 {
 	if (static_branch_likely(&mds_user_clear))
 		mds_clear_cpu_buffers();
Signature · 1 line
2.25.1
author maintainer
#131 lore raw

PATCH 131/166 ceph: fix potential race in ceph_check_caps

In reply to Greg Kroah-Hartman

From: Jeff Layton <[email protected]>

[ Upstream commit dc3da0461cc4b76f2d0c5b12247fcb3b520edbbf ]

Nothing ensures that session will still be valid by the time we dereference the pointer. Take and put a reference.

In principle, we should always be able to get a reference here, but throw a warning if that's ever not the case.

---
 fs/ceph/caps.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
fs/ceph/caps.c +13 -1
index 589cfe3ed873b..ce94d09f6abf9 100644
@@ -1906,12 +1906,24 @@ ack:
 			if (mutex_trylock(&session->s_mutex) == 0) {
 				dout("inverting session/ino locks on %p\n",
 				     session);
+				session = ceph_get_mds_session(session);
 				spin_unlock(&ci->i_ceph_lock);
 				if (took_snap_rwsem) {
 					up_read(&mdsc->snap_rwsem);
 					took_snap_rwsem = 0;
 				}
-				mutex_lock(&session->s_mutex);
+				if (session) {
+					mutex_lock(&session->s_mutex);
+					ceph_put_mds_session(session);
+				} else {
+					/*
+					 * Because we take the reference while
+					 * holding the i_ceph_lock, it should
+					 * never be NULL. Throw a warning if it
+					 * ever is.
+					 */
+					WARN_ON_ONCE(true);
+				}
 				goto retry;
 			}
 		}
Signature · 1 line
2.25.1
author maintainer
#138 lore raw

PATCH 138/166 scsi: libfc: Handling of extra kref

In reply to Greg Kroah-Hartman

From: Javed Hasan <[email protected]>

[ Upstream commit 71f2bf85e90d938d4a9ef9dd9bfa8d9b0b6a03f7 ]

Handling of extra kref which is done by lookup table in case rdata is already present in list.

This issue was leading to memory leak. Trace from KMEMLEAK tool:

unreferenced object 0xffff8888259e8780 (size 512):

    comm "kworker/2:1", pid 182614, jiffies 4433237386 (age 113021.971s)
    hex dump (first 32 bytes):
    58 0a ec cf 83 88 ff ff 00 00 00 00 00 00 00 00
    01 00 00 00 08 00 00 00 13 7d f0 1e 0e 00 00 10
  backtrace:
	[<000000006b25760f>] fc_rport_recv_req+0x3c6/0x18f0 [libfc]
	[<00000000f208d994>] fc_lport_recv_els_req+0x120/0x8a0 [libfc]
	[<00000000a9c437b8>] fc_lport_recv+0xb9/0x130 [libfc]
	[<00000000ad5be37b>] qedf_ll2_process_skb+0x73d/0xad0 [qedf]
	[<00000000e0eb6893>] process_one_work+0x382/0x6c0
	[<000000002dfd9e21>] worker_thread+0x57/0x5c0
	[<00000000b648204f>] kthread+0x1a0/0x1c0
	[<0000000072f5ab20>] ret_from_fork+0x35/0x40
	[<000000001d5c05d8>] 0xffffffffffffffff

Below is the log sequence which leads to memory leak. Here we get the nested "Received PLOGI request" for same port and this request leads to call the fc_rport_create() twice for the same rport.

kernel: host1: rport fffce5: Received PLOGI request
kernel: host1: rport fffce5: Received PLOGI in INIT state
kernel: host1: rport fffce5: Port is Ready
kernel: host1: rport fffce5: Received PRLI request while in state Ready
kernel: host1: rport fffce5: PRLI rspp type 8 active 1 passive 0
kernel: host1: rport fffce5: Received LOGO request while in state Ready
kernel: host1: rport fffce5: Delete port
kernel: host1: rport fffce5: Received PLOGI request
kernel: host1: rport fffce5: Received PLOGI in state Delete - send busy

---
 drivers/scsi/libfc/fc_rport.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/libfc/fc_rport.c +3 -1
index 0e964ce75406b..a9137f64befa0 100644
@@ -145,8 +145,10 @@ struct fc_rport_priv *fc_rport_create(struct fc_lport *lport, u32 port_id)
 	size_t rport_priv_size = sizeof(*rdata);
 
 	rdata = fc_rport_lookup(lport, port_id);
-	if (rdata)
+	if (rdata) {
+		kref_put(&rdata->kref, fc_rport_destroy);
 		return rdata;
+	}
 
 	if (lport->rport_priv_size > 0)
 		rport_priv_size = lport->rport_priv_size;
Signature · 1 line
2.25.1
author maintainer
#128 lore raw

PATCH 128/166 perf util: Fix memory leak of prefix_if_not_in

In reply to Greg Kroah-Hartman

From: Xie XiuQi <[email protected]>

[ Upstream commit 07e9a6f538cbeecaf5c55b6f2991416f873cdcbd ]

Need to free "str" before return when asprintf() failed to avoid memory leak.

---
 tools/perf/util/sort.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/util/sort.c +1 -1
index 84a33f1e9ec92..cd870129131e1 100644
@@ -2667,7 +2667,7 @@ static char *prefix_if_not_in(const char *pre, char *str)
 		return str;
 
 	if (asprintf(&n, "%s,%s", pre, str) < 0)
-		return NULL;
+		n = NULL;
 
 	free(str);
 	return n;
Signature · 1 line
2.25.1
author maintainer
#136 lore raw

PATCH 136/166 vfio/pci: Clear error and request eventfd ctx after releasing

In reply to Greg Kroah-Hartman

From: Alex Williamson <[email protected]>

[ Upstream commit 5c5866c593bbd444d0339ede6a8fb5f14ff66d72 ]

The next use of the device will generate an underflow from the stale reference.

Cc Qian Cai <[email protected]>
Fixes 1518ac272e78 ("vfio/pci: fix memory leaks of eventfd ctx")
---
 drivers/vfio/pci/vfio_pci.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/vfio/pci/vfio_pci.c +6 -2
index 902854a013521..4fbc38b955ad8 100644
@@ -399,10 +399,14 @@ static void vfio_pci_release(void *device_data)
 	if (!(--vdev->refcnt)) {
 		vfio_spapr_pci_eeh_release(vdev->pdev);
 		vfio_pci_disable(vdev);
-		if (vdev->err_trigger)
+		if (vdev->err_trigger) {
 			eventfd_ctx_put(vdev->err_trigger);
-		if (vdev->req_trigger)
+			vdev->err_trigger = NULL;
+		}
+		if (vdev->req_trigger) {
 			eventfd_ctx_put(vdev->req_trigger);
+			vdev->req_trigger = NULL;
+		}
 	}
 
 	mutex_unlock(&driver_lock);
Signature · 1 line
2.25.1
author maintainer
#140 lore raw

PATCH 140/166 selftests/x86/syscall_nt: Clear weird flags after each test

In reply to Greg Kroah-Hartman

From: Andy Lutomirski <[email protected]>

[ Upstream commit a61fa2799ef9bf6c4f54cf7295036577cececc72 ]

Clear the weird flags before logging to improve strace output -- logging results while, say, TF is set does no one any favors.

---
 tools/testing/selftests/x86/syscall_nt.c | 1 +
 1 file changed, 1 insertion(+)
tools/testing/selftests/x86/syscall_nt.c +1 -0
index 43fcab367fb0a..74e6b3fc2d09e 100644
@@ -67,6 +67,7 @@ static void do_it(unsigned long extraflags)
 	set_eflags(get_eflags() | extraflags);
 	syscall(SYS_getpid);
 	flags = get_eflags();
+	set_eflags(X86_EFLAGS_IF | X86_EFLAGS_FIXED);
 	if ((flags & extraflags) == extraflags) {
 		printf("[OK]\tThe syscall worked and flags are still set\n");
 	} else {
Signature · 1 line
2.25.1
author maintainer
#141 lore raw

PATCH 141/166 vfio/pci: fix racy on error and request eventfd ctx

In reply to Greg Kroah-Hartman

From: Zeng Tao <[email protected]>

[ Upstream commit b872d0640840018669032b20b6375a478ed1f923 ]

The vfio_pci_release call will free and clear the error and request eventfd ctx while these ctx could be in use at the same time in the function like vfio_pci_request, and it's expected to protect them under the vdev->igate mutex, which is missing in vfio_pci_release.

This issue is introduced since commit 1518ac272e78 ("vfio/pci: fix memory leaks of eventfd ctx"),and since commit 5c5866c593bb ("vfio/pci: Clear error and request eventfd ctx after releasing"), it's very easily to trigger the kernel panic like this:

[ 9513.904346] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 9513.913091] Mem abort info:
[ 9513.915871]   ESR = 0x96000006
[ 9513.918912]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 9513.924198]   SET = 0, FnV = 0
[ 9513.927238]   EA = 0, S1PTW = 0
[ 9513.930364] Data abort info:
[ 9513.933231]   ISV = 0, ISS = 0x00000006
[ 9513.937048]   CM = 0, WnR = 0
[ 9513.940003] user pgtable: 4k pages, 48-bit VAs, pgdp=0000007ec7d12000
[ 9513.946414] [0000000000000008] pgd=0000007ec7d13003, p4d=0000007ec7d13003, pud=0000007ec728c003, pmd=0000000000000000
[ 9513.956975] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 9513.962521] Modules linked in: vfio_pci vfio_virqfd vfio_iommu_type1 vfio hclge hns3 hnae3 [last unloaded: vfio_pci]
[ 9513.972998] CPU: 4 PID: 1327 Comm: bash Tainted: G        W         5.8.0-rc4+ #3
[ 9513.980443] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B270.01 05/08/2020
[ 9513.989274] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--)
[ 9513.994827] pc : _raw_spin_lock_irqsave+0x48/0x88
[ 9513.999515] lr : eventfd_signal+0x6c/0x1b0
[ 9514.003591] sp : ffff800038a0b960
[ 9514.006889] x29: ffff800038a0b960 x28: ffff007ef7f4da10
[ 9514.012175] x27: ffff207eefbbfc80 x26: ffffbb7903457000
[ 9514.017462] x25: ffffbb7912191000 x24: ffff007ef7f4d400
[ 9514.022747] x23: ffff20be6e0e4c00 x22: 0000000000000008
[ 9514.028033] x21: 0000000000000000 x20: 0000000000000000
[ 9514.033321] x19: 0000000000000008 x18: 0000000000000000
[ 9514.038606] x17: 0000000000000000 x16: ffffbb7910029328
[ 9514.043893] x15: 0000000000000000 x14: 0000000000000001
[ 9514.049179] x13: 0000000000000000 x12: 0000000000000002
[ 9514.054466] x11: 0000000000000000 x10: 0000000000000a00
[ 9514.059752] x9 : ffff800038a0b840 x8 : ffff007ef7f4de60
[ 9514.065038] x7 : ffff007fffc96690 x6 : fffffe01faffb748
[ 9514.070324] x5 : 0000000000000000 x4 : 0000000000000000
[ 9514.075609] x3 : 0000000000000000 x2 : 0000000000000001
[ 9514.080895] x1 : ffff007ef7f4d400 x0 : 0000000000000000
[ 9514.086181] Call trace:
[ 9514.088618]  _raw_spin_lock_irqsave+0x48/0x88
[ 9514.092954]  eventfd_signal+0x6c/0x1b0
[ 9514.096691]  vfio_pci_request+0x84/0xd0 [vfio_pci]
[ 9514.101464]  vfio_del_group_dev+0x150/0x290 [vfio]
[ 9514.106234]  vfio_pci_remove+0x30/0x128 [vfio_pci]
[ 9514.111007]  pci_device_remove+0x48/0x108
[ 9514.115001]  device_release_driver_internal+0x100/0x1b8
[ 9514.120200]  device_release_driver+0x28/0x38
[ 9514.124452]  pci_stop_bus_device+0x68/0xa8
[ 9514.128528]  pci_stop_and_remove_bus_device+0x20/0x38
[ 9514.133557]  pci_iov_remove_virtfn+0xb4/0x128
[ 9514.137893]  sriov_disable+0x3c/0x108
[ 9514.141538]  pci_disable_sriov+0x28/0x38
[ 9514.145445]  hns3_pci_sriov_configure+0x48/0xb8 [hns3]
[ 9514.150558]  sriov_numvfs_store+0x110/0x198
[ 9514.154724]  dev_attr_store+0x44/0x60
[ 9514.158373]  sysfs_kf_write+0x5c/0x78
[ 9514.162018]  kernfs_fop_write+0x104/0x210
[ 9514.166010]  __vfs_write+0x48/0x90
[ 9514.169395]  vfs_write+0xbc/0x1c0
[ 9514.172694]  ksys_write+0x74/0x100
[ 9514.176079]  __arm64_sys_write+0x24/0x30
[ 9514.179987]  el0_svc_common.constprop.4+0x110/0x200
[ 9514.184842]  do_el0_svc+0x34/0x98
[ 9514.188144]  el0_svc+0x14/0x40
[ 9514.191185]  el0_sync_handler+0xb0/0x2d0
[ 9514.195088]  el0_sync+0x140/0x180
[ 9514.198389] Code: b9001020 d2800000 52800022 f9800271 (885ffe61)
[ 9514.204455] ---[ end trace 648de00c8406465f ]---
[ 9514.212308] note: bash[1327] exited with preempt_count 1
Cc Qian Cai <[email protected]>
Cc Alex Williamson <[email protected]>
Fixes 1518ac272e78 ("vfio/pci: fix memory leaks of eventfd ctx")
---
 drivers/vfio/pci/vfio_pci.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/vfio/pci/vfio_pci.c +5 -0
index 4fbc38b955ad8..ac1c54bcfe8fb 100644
@@ -399,14 +399,19 @@ static void vfio_pci_release(void *device_data)
 	if (!(--vdev->refcnt)) {
 		vfio_spapr_pci_eeh_release(vdev->pdev);
 		vfio_pci_disable(vdev);
+		mutex_lock(&vdev->igate);
 		if (vdev->err_trigger) {
 			eventfd_ctx_put(vdev->err_trigger);
 			vdev->err_trigger = NULL;
 		}
+		mutex_unlock(&vdev->igate);
+
+		mutex_lock(&vdev->igate);
 		if (vdev->req_trigger) {
 			eventfd_ctx_put(vdev->req_trigger);
 			vdev->req_trigger = NULL;
 		}
+		mutex_unlock(&vdev->igate);
 	}
 
 	mutex_unlock(&driver_lock);
Signature · 1 line
2.25.1
author maintainer
#142 lore raw

PATCH 142/166 btrfs: qgroup: fix data leak caused by race between writeback and truncate

In reply to Greg Kroah-Hartman

From: Qu Wenruo <[email protected]>

[ Upstream commit fa91e4aa1716004ea8096d5185ec0451e206aea0 ]

[BUG]
When running tests like generic/013 on test device with btrfs quota enabled, it can normally lead to data leak, detected at unmount time:

BTRFS warning (device dm-3): qgroup 0/5 has unreleased space, type 0 rsv 4096

  ------------[ cut here ]------------
  WARNING: CPU: 11 PID: 16386 at fs/btrfs/disk-io.c:4142 close_ctree+0x1dc/0x323 [btrfs]
  RIP: 0010:close_ctree+0x1dc/0x323 [btrfs]
  Call Trace:
   btrfs_put_super+0x15/0x17 [btrfs]
   generic_shutdown_super+0x72/0x110
   kill_anon_super+0x18/0x30
   btrfs_kill_super+0x17/0x30 [btrfs]
   deactivate_locked_super+0x3b/0xa0
   deactivate_super+0x40/0x50
   cleanup_mnt+0x135/0x190
   __cleanup_mnt+0x12/0x20
   task_work_run+0x64/0xb0
   __prepare_exit_to_usermode+0x1bc/0x1c0
   __syscall_return_slowpath+0x47/0x230
   do_syscall_64+0x64/0xb0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ---[ end trace caf08beafeca2392 ]---
  BTRFS error (device dm-3): qgroup reserved space leaked

[CAUSE]
In the offending case, the offending operations are:
2/6: writev f2X[269 1 0 0 0 0] [1006997,67,288] 0 2/7: truncate f2X[269 1 0 0 48 1026293] 18388 0

The following sequence of events could happen after the writev():

	CPU1 (writeback)		|		CPU2 (truncate)
-----------------------------------------------------------------
btrfs_writepages()			|
|- extent_write_cache_pages()		|
   |- Got page for 1003520		|
   |  1003520 is Dirty, no writeback	|
   |  So (!clear_page_dirty_for_io())   |
   |  gets called for it		|
   |- Now page 1003520 is Clean.	|
   |					| btrfs_setattr()
   |					| |- btrfs_setsize()
   |					|    |- truncate_setsize()
   |					|       New i_size is 18388
   |- __extent_writepage()		|
   |  |- page_offset() > i_size		|
      |- btrfs_invalidatepage()		|
	 |- Page is clean, so no qgroup |

callback executed

This means, the qgroup reserved data space is not properly released in btrfs_invalidatepage() as the page is Clean.

[FIX]
Instead of checking the dirty bit of a page, call btrfs_qgroup_free_data() unconditionally in btrfs_invalidatepage().

As qgroup rsv are completely bound to the QGROUP_RESERVED bit of io_tree, not bound to page status, thus we won't cause double freeing anyway.

Fixes 0b34c261e235 ("btrfs: qgroup: Prevent qgroup->reserved from going subzero")
---
 fs/btrfs/inode.c | 23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)
fs/btrfs/inode.c +10 -13
index 17856e92b93d1..c9e7b92d0f212 100644
@@ -9204,20 +9204,17 @@ again:
 	/*
 	 * Qgroup reserved space handler
 	 * Page here will be either
-	 * 1) Already written to disk
-	 *    In this case, its reserved space is released from data rsv map
-	 *    and will be freed by delayed_ref handler finally.
-	 *    So even we call qgroup_free_data(), it won't decrease reserved
-	 *    space.
-	 * 2) Not written to disk
-	 *    This means the reserved space should be freed here. However,
-	 *    if a truncate invalidates the page (by clearing PageDirty)
-	 *    and the page is accounted for while allocating extent
-	 *    in btrfs_check_data_free_space() we let delayed_ref to
-	 *    free the entire extent.
+	 * 1) Already written to disk or ordered extent already submitted
+	 *    Then its QGROUP_RESERVED bit in io_tree is already cleaned.
+	 *    Qgroup will be handled by its qgroup_record then.
+	 *    btrfs_qgroup_free_data() call will do nothing here.
+	 *
+	 * 2) Not written to disk yet
+	 *    Then btrfs_qgroup_free_data() call will clear the QGROUP_RESERVED
+	 *    bit of its io_tree, and free the qgroup reserved data space.
+	 *    Since the IO will never happen for this page.
 	 */
-	if (PageDirty(page))
-		btrfs_qgroup_free_data(inode, NULL, page_start, PAGE_SIZE);
+	btrfs_qgroup_free_data(inode, NULL, page_start, PAGE_SIZE);
 	if (!inode_evicting) {
 		clear_extent_bit(tree, page_start, page_end,
 				 EXTENT_LOCKED | EXTENT_DIRTY |
Signature · 1 line
2.25.1
author maintainer
#130 lore raw

PATCH 130/166 mtd: rawnand: omap_elm: Fix runtime PM imbalance on error

In reply to Greg Kroah-Hartman

From: Dinghao Liu <[email protected]>

[ Upstream commit 37f7212148cf1d796135cdf8d0c7fee13067674b ]

pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

---
 drivers/mtd/nand/omap_elm.c | 1 +
 1 file changed, 1 insertion(+)
drivers/mtd/nand/omap_elm.c +1 -0
index a3f32f939cc17..6736777a41567 100644
@@ -421,6 +421,7 @@ static int elm_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	if (pm_runtime_get_sync(&pdev->dev) < 0) {
 		ret = -EINVAL;
+		pm_runtime_put_sync(&pdev->dev);
 		pm_runtime_disable(&pdev->dev);
 		dev_err(&pdev->dev, "can't enable clock\n");
 		return ret;
Signature · 1 line
2.25.1
author maintainer
#94 lore raw

PATCH 94/166 svcrdma: Fix leak of transport addresses

In reply to Greg Kroah-Hartman

From: Chuck Lever <[email protected]>

[ Upstream commit 1a33d8a284b1e85e03b8c7b1ea8fb985fccd1d71 ]

Kernel memory leak detected:

unreferenced object 0xffff888849cdf480 (size 8):
comm "kworker/u8:3", pid 2086, jiffies 4297898756 (age 4269.856s) hex dump (first 8 bytes):

    30 00 cd 49 88 88 ff ff                          0..I....
  backtrace:
    [<00000000acfc370b>] __kmalloc_track_caller+0x137/0x183
    [<00000000a2724354>] kstrdup+0x2b/0x43
    [<0000000082964f84>] xprt_rdma_format_addresses+0x114/0x17d [rpcrdma]
    [<00000000dfa6ed00>] xprt_setup_rdma_bc+0xc0/0x10c [rpcrdma]
    [<0000000073051a83>] xprt_create_transport+0x3f/0x1a0 [sunrpc]
    [<0000000053531a8e>] rpc_create+0x118/0x1cd [sunrpc]
    [<000000003a51b5f8>] setup_callback_client+0x1a5/0x27d [nfsd]
    [<000000001bd410af>] nfsd4_process_cb_update.isra.7+0x16c/0x1ac [nfsd]
    [<000000007f4bbd56>] nfsd4_run_cb_work+0x4c/0xbd [nfsd]
    [<0000000055c5586b>] process_one_work+0x1b2/0x2fe
    [<00000000b1e3e8ef>] worker_thread+0x1a6/0x25a
    [<000000005205fb78>] kthread+0xf6/0xfb
    [<000000006d2dc057>] ret_from_fork+0x3a/0x50

Introduce a call to xprt_rdma_free_addresses() similar to the way that the TCP backchannel releases a transport's peer address strings.

Fixes 5d252f90a800 ("svcrdma: Add class for RDMA backwards direction transport")
---
 net/sunrpc/xprtrdma/svc_rdma_backchannel.c | 1 +
 1 file changed, 1 insertion(+)
net/sunrpc/xprtrdma/svc_rdma_backchannel.c +1 -0
index af7893501e40a..4b9aaf487327c 100644
@@ -270,6 +270,7 @@ xprt_rdma_bc_put(struct rpc_xprt *xprt)
 {
 	dprintk("svcrdma: %s: xprt %p\n", __func__, xprt);
 
+	xprt_rdma_free_addresses(xprt);
 	xprt_free(xprt);
 	module_put(THIS_MODULE);
 }
Signature · 1 line
2.25.1
author maintainer
#90 lore raw

PATCH 90/166 cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_work_fn

In reply to Greg Kroah-Hartman

From: Pratik Rajesh Sampat <[email protected]>

[ Upstream commit d95fe371ecd28901f11256c610b988ed44e36ee2 ]

The patch avoids allocating cpufreq_policy on stack hence fixing frame size overflow in 'powernv_cpufreq_work_fn'

Fixes 227942809b52 ("cpufreq: powernv: Restore cpu frequency to policy->cur on unthrottling")
---
 drivers/cpufreq/powernv-cpufreq.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
drivers/cpufreq/powernv-cpufreq.c +8 -5
index 25c9a6cdd8614..dc81fc2bf8015 100644
@@ -864,6 +864,7 @@ static struct notifier_block powernv_cpufreq_reboot_nb = {
 void powernv_cpufreq_work_fn(struct work_struct *work)
 {
 	struct chip *chip = container_of(work, struct chip, throttle);
+	struct cpufreq_policy *policy;
 	unsigned int cpu;
 	cpumask_t mask;
 
@@ -878,12 +879,14 @@ void powernv_cpufreq_work_fn(struct work_struct *work)
 	chip->restore = false;
 	for_each_cpu(cpu, &mask) {
 		int index;
-		struct cpufreq_policy policy;
 
-		cpufreq_get_policy(&policy, cpu);
-		index = cpufreq_table_find_index_c(&policy, policy.cur);
-		powernv_cpufreq_target_index(&policy, index);
-		cpumask_andnot(&mask, &mask, policy.cpus);
+		policy = cpufreq_cpu_get(cpu);
+		if (!policy)
+			continue;
+		index = cpufreq_table_find_index_c(policy, policy->cur);
+		powernv_cpufreq_target_index(policy, index);
+		cpumask_andnot(&mask, &mask, policy->cpus);
+		cpufreq_cpu_put(policy);
 	}
 out:
 	put_online_cpus();
Signature · 1 line
2.25.1
author maintainer
#91 lore raw

PATCH 91/166 tools: gpio-hammer: Avoid potential overflow in main

In reply to Greg Kroah-Hartman

From: Gabriel Ravier <[email protected]>

[ Upstream commit d1ee7e1f5c9191afb69ce46cc7752e4257340a31 ]

If '-o' was used more than 64 times in a single invocation of gpio-hammer, this could lead to an overflow of the 'lines' array. This commit fixes this by avoiding the overflow and giving a proper diagnostic back to the user

---
 tools/gpio/gpio-hammer.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)
tools/gpio/gpio-hammer.c +16 -1
index 4bcb234c0fcab..3da5462a0c7d3 100644
@@ -138,7 +138,14 @@ int main(int argc, char **argv)
 			device_name = optarg;
 			break;
 		case 'o':
-			lines[i] = strtoul(optarg, NULL, 10);
+			/*
+			 * Avoid overflow. Do not immediately error, we want to
+			 * be able to accurately report on the amount of times
+			 * '-o' was given to give an accurate error message
+			 */
+			if (i < GPIOHANDLES_MAX)
+				lines[i] = strtoul(optarg, NULL, 10);
+
 			i++;
 			break;
 		case '?':
@@ -146,6 +153,14 @@ int main(int argc, char **argv)
 			return -1;
 		}
 	}
+
+	if (i >= GPIOHANDLES_MAX) {
+		fprintf(stderr,
+			"Only %d occurences of '-o' are allowed, %d were found\n",
+			GPIOHANDLES_MAX, i + 1);
+		return -1;
+	}
+
 	nlines = i;
 
 	if (!device_name || !nlines) {
Signature · 1 line
2.25.1
author maintainer
#93 lore raw

PATCH 93/166 SUNRPC: Fix a potential buffer overflow in svc_print_xprts()

In reply to Greg Kroah-Hartman

From: Christophe JAILLET <[email protected]>

[ Upstream commit b25b60d7bfb02a74bc3c2d998e09aab159df8059 ]

'maxlen' is the total size of the destination buffer. There is only one caller and this value is 256.

When we compute the size already used and what we would like to add in the buffer, the trailling NULL character is not taken into account. However, this trailling character will be added by the 'strcat' once we have checked that we have enough place.

So, there is a off-by-one issue and 1 byte of the stack could be erroneously overwridden.

Take into account the trailling NULL, when checking if there is enough place in the destination buffer.

While at it, also replace a 'sprintf' by a safer 'snprintf', check for output truncation and avoid a superfluous 'strlen'.

Fixes dc9a16e49dbba ("svc: Add /proc/sys/sunrpc/transport files")

[ cel: very minor fix to documenting comment

---
 net/sunrpc/svc_xprt.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)
net/sunrpc/svc_xprt.c +14 -5
index 7e5f849b44cdb..b293827b2a583 100644
@@ -103,8 +103,17 @@ void svc_unreg_xprt_class(struct svc_xprt_class *xcl)
 }
 EXPORT_SYMBOL_GPL(svc_unreg_xprt_class);
 
-/*
- * Format the transport list for printing
+/**
+ * svc_print_xprts - Format the transport list for printing
+ * @buf: target buffer for formatted address
+ * @maxlen: length of target buffer
+ *
+ * Fills in @buf with a string containing a list of transport names, each name
+ * terminated with '\n'. If the buffer is too small, some entries may be
+ * missing, but it is guaranteed that all lines in the output buffer are
+ * complete.
+ *
+ * Returns positive length of the filled-in string.
  */
 int svc_print_xprts(char *buf, int maxlen)
 {
@@ -117,9 +126,9 @@ int svc_print_xprts(char *buf, int maxlen)
 	list_for_each_entry(xcl, &svc_xprt_class_list, xcl_list) {
 		int slen;
 
-		sprintf(tmpstr, "%s %d\n", xcl->xcl_name, xcl->xcl_max_payload);
-		slen = strlen(tmpstr);
-		if (len + slen > maxlen)
+		slen = snprintf(tmpstr, sizeof(tmpstr), "%s %d\n",
+				xcl->xcl_name, xcl->xcl_max_payload);
+		if (slen >= sizeof(tmpstr) || len + slen >= maxlen)
 			break;
 		len += slen;
 		strcat(buf, tmpstr);
Signature · 1 line
2.25.1
author maintainer
#92 lore raw

PATCH 92/166 RDMA/rxe: Set sys_image_guid to be aligned with HW IB devices

In reply to Greg Kroah-Hartman

From: Zhu Yanjun <[email protected]>

[ Upstream commit d0ca2c35dd15a3d989955caec02beea02f735ee6 ]

The RXE driver doesn't set sys_image_guid and user space applications see zeros. This causes to pyverbs tests to fail with the following traceback, because the IBTA spec requires to have valid sys_image_guid.

Traceback (most recent call last):
File "./tests/test_device.py", line 51, in test_query_device
self.verify_device_attr(attr)
File "./tests/test_device.py", line 74, in verify_device_attr

     assert attr.sys_image_guid != 0

In order to fix it, set sys_image_guid to be equal to node_guid.

Before:
5: rxe0: ... node_guid 5054:00ff:feaa:5363 sys_image_guid 0000:0000:0000:0000

After:
5: rxe0: ... node_guid 5054:00ff:feaa:5363 sys_image_guid 5054:00ff:feaa:5363

---
 drivers/infiniband/sw/rxe/rxe.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/infiniband/sw/rxe/rxe.c +2 -0
index 25267a620e0b5..e6770e5c1432c 100644
@@ -126,6 +126,8 @@ static int rxe_init_device_param(struct rxe_dev *rxe)
 	rxe->attr.max_fast_reg_page_list_len	= RXE_MAX_FMR_PAGE_LIST_LEN;
 	rxe->attr.max_pkeys			= RXE_MAX_PKEYS;
 	rxe->attr.local_ca_ack_delay		= RXE_LOCAL_CA_ACK_DELAY;
+	addrconf_addr_eui48((unsigned char *)&rxe->attr.sys_image_guid,
+			rxe->ndev->dev_addr);
 
 	rxe->max_ucontext			= RXE_MAX_UCONTEXT;
 
Signature · 1 line
2.25.1
author maintainer
#112 lore raw

PATCH 112/166 power: supply: max17040: Correct voltage reading

In reply to Greg Kroah-Hartman

From: Jonathan Bakker <[email protected]>

[ Upstream commit 0383024f811aa469df258039807810fc3793a105 ]

According to the datasheet available at (1), the bottom four bits are always zero and the actual voltage is 1.25x this value in mV. Since the kernel API specifies that voltages should be in uV, it should report 1250x the shifted value.

1) https://datasheets.maximintegrated.com/en/ds/MAX17040-MAX17041.pdf

---
 drivers/power/supply/max17040_battery.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/power/supply/max17040_battery.c +1 -1
index 33c40f79d23d5..2c35c13ad546f 100644
@@ -109,7 +109,7 @@ static void max17040_get_vcell(struct i2c_client *client)
 
 	vcell = max17040_read_reg(client, MAX17040_VCELL);
 
-	chip->vcell = vcell;
+	chip->vcell = (vcell >> 4) * 1250;
 }
 
 static void max17040_get_soc(struct i2c_client *client)
Signature · 1 line
2.25.1
author maintainer
#114 lore raw

PATCH 114/166 Bluetooth: Handle Inquiry Cancel error after Inquiry Complete

In reply to Greg Kroah-Hartman

From: Sonny Sasaka <[email protected]>

[ Upstream commit adf1d6926444029396861413aba8a0f2a805742a ]

After sending Inquiry Cancel command to the controller, it is possible that Inquiry Complete event comes before Inquiry Cancel command complete event. In this case the Inquiry Cancel command will have status of Command Disallowed since there is no Inquiry session to be cancelled. This case should not be treated as error, otherwise we can reach an inconsistent state.

Example of a btmon trace when this happened:

< HCI Command: Inquiry Cancel (0x01|0x0002) plen 0

Quoted 1 line

HCI Event: Inquiry Complete (0x01) plen 1

        Status: Success (0x00)
Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4

      Inquiry Cancel (0x01|0x0002) ncmd 1
        Status: Command Disallowed (0x0c)
---
 net/bluetooth/hci_event.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)
net/bluetooth/hci_event.c +17 -2
index 1d2f439043669..587b674bbcd64 100644
@@ -41,12 +41,27 @@
 
 /* Handle HCI Event packets */
 
-static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb)
+static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb,
+				  u8 *new_status)
 {
 	__u8 status = *((__u8 *) skb->data);
 
 	BT_DBG("%s status 0x%2.2x", hdev->name, status);
 
+	/* It is possible that we receive Inquiry Complete event right
+	 * before we receive Inquiry Cancel Command Complete event, in
+	 * which case the latter event should have status of Command
+	 * Disallowed (0x0c). This should not be treated as error, since
+	 * we actually achieve what Inquiry Cancel wants to achieve,
+	 * which is to end the last Inquiry session.
+	 */
+	if (status == 0x0c && !test_bit(HCI_INQUIRY, &hdev->flags)) {
+		bt_dev_warn(hdev, "Ignoring error of Inquiry Cancel command");
+		status = 0x00;
+	}
+
+	*new_status = status;
+
 	if (status)
 		return;
 
@@ -2772,7 +2787,7 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb,
 
 	switch (*opcode) {
 	case HCI_OP_INQUIRY_CANCEL:
-		hci_cc_inquiry_cancel(hdev, skb);
+		hci_cc_inquiry_cancel(hdev, skb, status);
 		break;
 
 	case HCI_OP_PERIODIC_INQ:
Signature · 1 line
2.25.1
author maintainer
#117 lore raw

PATCH 117/166 ALSA: hda: Fix potential race in unsol event handler

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

[ Upstream commit c637fa151259c0f74665fde7cba5b7eac1417ae5 ]

The unsol event handling code has a loop retrieving the read/write indices and the arrays without locking while the append to the array may happen concurrently. This may lead to some inconsistency. Although there hasn't been any proof of this bad results, it's still safer to protect the racy accesses.

This patch adds the spinlock protection around the unsol handling loop for addressing it. Here we take bus->reg_lock as the writer side snd_hdac_bus_queue_event() is also protected by that lock.

---
 sound/hda/hdac_bus.c | 4 ++++
 1 file changed, 4 insertions(+)
sound/hda/hdac_bus.c +4 -0
index 714a51721a313..ab9236e4c157e 100644
@@ -155,6 +155,7 @@ static void process_unsol_events(struct work_struct *work)
 	struct hdac_driver *drv;
 	unsigned int rp, caddr, res;
 
+	spin_lock_irq(&bus->reg_lock);
 	while (bus->unsol_rp != bus->unsol_wp) {
 		rp = (bus->unsol_rp + 1) % HDA_UNSOL_QUEUE_SIZE;
 		bus->unsol_rp = rp;
@@ -166,10 +167,13 @@ static void process_unsol_events(struct work_struct *work)
 		codec = bus->caddr_tbl[caddr & 0x0f];
 		if (!codec || !codec->dev.driver)
 			continue;
+		spin_unlock_irq(&bus->reg_lock);
 		drv = drv_to_hdac_driver(codec->dev.driver);
 		if (drv->unsol_event)
 			drv->unsol_event(codec, res);
+		spin_lock_irq(&bus->reg_lock);
 	}
+	spin_unlock_irq(&bus->reg_lock);
 }
 
 /**
Signature · 1 line
2.25.1
author maintainer
#111 lore raw

PATCH 111/166 atm: fix a memory leak of vcc->user_back

In reply to Greg Kroah-Hartman

From: Cong Wang <[email protected]>

[ Upstream commit 8d9f73c0ad2f20e9fed5380de0a3097825859d03 ]

In lec_arp_clear_vccs() only entry->vcc is freed, but vcc could be installed on entry->recv_vcc too in lec_vcc_added().

This fixes the following memory leak:

unreferenced object 0xffff8880d9266b90 (size 16):
comm "atm2", pid 425, jiffies 4294907980 (age 23.488s) hex dump (first 16 bytes):

    00 00 00 00 00 00 00 00 00 00 00 00 6b 6b 6b a5  ............kkk.
  backtrace:
    [<(____ptrval____)>] kmem_cache_alloc_trace+0x10e/0x151
    [<(____ptrval____)>] lane_ioctl+0x4b3/0x569
    [<(____ptrval____)>] do_vcc_ioctl+0x1ea/0x236
    [<(____ptrval____)>] svc_ioctl+0x17d/0x198
    [<(____ptrval____)>] sock_do_ioctl+0x47/0x12f
    [<(____ptrval____)>] sock_ioctl+0x2f9/0x322
    [<(____ptrval____)>] vfs_ioctl+0x1e/0x2b
    [<(____ptrval____)>] ksys_ioctl+0x61/0x80
    [<(____ptrval____)>] __x64_sys_ioctl+0x16/0x19
    [<(____ptrval____)>] do_syscall_64+0x57/0x65
    [<(____ptrval____)>] entry_SYSCALL_64_after_hwframe+0x49/0xb3
---
 net/atm/lec.c | 6 ++++++
 1 file changed, 6 insertions(+)
net/atm/lec.c +6 -0
index 85ce89c8a35c9..0b0794b6a8149 100644
@@ -1282,6 +1282,12 @@ static void lec_arp_clear_vccs(struct lec_arp_table *entry)
 		entry->vcc = NULL;
 	}
 	if (entry->recv_vcc) {
+		struct atm_vcc *vcc = entry->recv_vcc;
+		struct lec_vcc_priv *vpriv = LEC_VCC_PRIV(vcc);
+
+		kfree(vpriv);
+		vcc->user_back = NULL;
+
 		entry->recv_vcc->push = entry->old_recv_push;
 		vcc_release_async(entry->recv_vcc, -EPIPE);
 		entry->recv_vcc = NULL;
Signature · 1 line
2.25.1
author maintainer
#116 lore raw

PATCH 116/166 tty: serial: samsung: Correct clock selection logic

In reply to Greg Kroah-Hartman

From: Jonathan Bakker <[email protected]>

[ Upstream commit 7d31676a8d91dd18e08853efd1cb26961a38c6a6 ]

Some variants of the samsung tty driver can pick which clock to use for their baud rate generation. In the DT conversion, a default clock was selected to be used if a specific one wasn't assigned and then a comparison of which clock rate worked better was done. Unfortunately, the comparison was implemented in such a way that only the default clock was ever actually compared. Fix this by iterating through all possible clocks, except when a specific clock has already been picked via clk_sel (which is only possible via board files).

---
 drivers/tty/serial/samsung.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/tty/serial/samsung.c +4 -4
index c67d39fea74ca..70d29b697e822 100644
@@ -1165,14 +1165,14 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
 	struct s3c24xx_uart_info *info = ourport->info;
 	struct clk *clk;
 	unsigned long rate;
-	unsigned int cnt, baud, quot, clk_sel, best_quot = 0;
+	unsigned int cnt, baud, quot, best_quot = 0;
 	char clkname[MAX_CLK_NAME_LENGTH];
 	int calc_deviation, deviation = (1 << 30) - 1;
 
-	clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
-			ourport->info->def_clk_sel;
 	for (cnt = 0; cnt < info->num_clks; cnt++) {
-		if (!(clk_sel & (1 << cnt)))
+		/* Keep selected clock if provided */
+		if (ourport->cfg->clk_sel &&
+			!(ourport->cfg->clk_sel & (1 << cnt)))
 			continue;
 
 		sprintf(clkname, "clk_uart_baud%d", cnt);
Signature · 1 line
2.25.1
author maintainer
#108 lore raw

PATCH 108/166 sparc64: vcc: Fix error return code in vcc_probe()

In reply to Greg Kroah-Hartman

From: Wei Yongjun <[email protected]>

[ Upstream commit ff62255a2a5c1228a28f2bb063646f948115a309 ]

Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function.

---
 drivers/tty/vcc.c | 1 +
 1 file changed, 1 insertion(+)
drivers/tty/vcc.c +1 -0
index ef01d24858cd6..4e795353192bc 100644
@@ -612,6 +612,7 @@ static int vcc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	port->index = vcc_table_add(port);
 	if (port->index == -1) {
 		pr_err("VCC: no more TTY indices left for allocation\n");
+		rv = -ENOMEM;
 		goto free_ldc;
 	}
 
Signature · 1 line
2.25.1
author maintainer
#105 lore raw

PATCH 105/166 bdev: Reduce time holding bd_mutex in sync in blkdev_close()

In reply to Greg Kroah-Hartman

From: Douglas Anderson <[email protected]>

[ Upstream commit b849dd84b6ccfe32622988b79b7b073861fcf9f7 ]

While trying to "dd" to the block device for a USB stick, I encountered a hung task warning (blocked for > 120 seconds). I managed to come up with an easy way to reproduce this on my system (where /dev/sdb is the block device for my USB stick) with:

while true; do dd if=/dev/zero of=/dev/sdb bs=4M; done

With my reproduction here are the relevant bits from the hung task detector:

 INFO: task udevd:294 blocked for more than 122 seconds.
 ...
 udevd           D    0   294      1 0x00400008
 Call trace:
  ...
  mutex_lock_nested+0x40/0x50
  __blkdev_get+0x7c/0x3d4
  blkdev_get+0x118/0x138
  blkdev_open+0x94/0xa8
  do_dentry_open+0x268/0x3a0
  vfs_open+0x34/0x40
  path_openat+0x39c/0xdf4
  do_filp_open+0x90/0x10c
  do_sys_open+0x150/0x3c8
  ...

...

 Showing all locks held in the system:
 ...
 1 lock held by dd/2798:
  #0: ffffff814ac1a3b8 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x50/0x204
 ...
 dd              D    0  2798   2764 0x00400208
 Call trace:
  ...
  schedule+0x8c/0xbc
  io_schedule+0x1c/0x40
  wait_on_page_bit_common+0x238/0x338
  __lock_page+0x5c/0x68
  write_cache_pages+0x194/0x500
  generic_writepages+0x64/0xa4
  blkdev_writepages+0x24/0x30
  do_writepages+0x48/0xa8
  __filemap_fdatawrite_range+0xac/0xd8
  filemap_write_and_wait+0x30/0x84
  __blkdev_put+0x88/0x204
  blkdev_put+0xc4/0xe4
  blkdev_close+0x28/0x38
  __fput+0xe0/0x238
  ____fput+0x1c/0x28
  task_work_run+0xb0/0xe4
  do_notify_resume+0xfc0/0x14bc
  work_pending+0x8/0x14

The problem appears related to the fact that my USB disk is terribly slow and that I have a lot of RAM in my system to cache things. Specifically my writes seem to be happening at ~15 MB/s and I've got ~4 GB of RAM in my system that can be used for buffering. To write 4 GB of buffer to disk thus takes ~4000 MB / ~15 MB/s = ~267 seconds.

The 267 second number is a problem because in __blkdev_put() we call sync_blockdev() while holding the bd_mutex. Any other callers who want the bd_mutex will be blocked for the whole time.

The problem is made worse because I believe blkdev_put() specifically tells other tasks (namely udev) to go try to access the device at right around the same time we're going to hold the mutex for a long time.

Putting some traces around this (after disabling the hung task detector), I could confirm:
dd: 437.608600: __blkdev_put() right before sync_blockdev() for sdb
udevd: 437.623901: blkdev_open() right before blkdev_get() for sdb
dd: 661.468451: __blkdev_put() right after sync_blockdev() for sdb
udevd: 663.820426: blkdev_open() right after blkdev_get() for sdb

A simple fix for this is to realize that sync_blockdev() works fine if you're not holding the mutex. Also, it's not the end of the world if you sync a little early (though it can have performance impacts). Thus we can make a guess that we're going to need to do the sync and then do it without holding the mutex. We still do one last sync with the mutex but it should be much, much faster.

With this, my hung task warnings for my test case are gone.

---
 fs/block_dev.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
fs/block_dev.c +10 -0
index 77ce77a283247..23fb999b49e15 100644
@@ -1777,6 +1777,16 @@ static void __blkdev_put(struct block_device *bdev, fmode_t mode, int for_part)
 	struct gendisk *disk = bdev->bd_disk;
 	struct block_device *victim = NULL;
 
+	/*
+	 * Sync early if it looks like we're the last one.  If someone else
+	 * opens the block device between now and the decrement of bd_openers
+	 * then we did a sync that we didn't need to, but that's not the end
+	 * of the world and we want to avoid long (could be several minute)
+	 * syncs while holding the mutex.
+	 */
+	if (bdev->bd_openers == 1)
+		sync_blockdev(bdev);
+
 	mutex_lock_nested(&bdev->bd_mutex, for_part);
 	if (for_part)
 		bdev->bd_part_count--;
Signature · 1 line
2.25.1
author maintainer
#87 lore raw

PATCH 87/166 serial: 8250_omap: Fix sleeping function called from invalid context during probe

In reply to Greg Kroah-Hartman

From: Peter Ujfalusi <[email protected]>

[ Upstream commit 4ce35a3617c0ac758c61122b2218b6c8c9ac9398 ]

When booting j721e the following bug is printed:

[    1.154821] BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
[    1.154827] in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 12, name: kworker/0:1
[    1.154832] 3 locks held by kworker/0:1/12:
[    1.154836]  #0: ffff000840030728 ((wq_completion)events){+.+.}, at: process_one_work+0x1d4/0x6e8
[    1.154852]  #1: ffff80001214fdd8 (deferred_probe_work){+.+.}, at: process_one_work+0x1d4/0x6e8
[    1.154860]  #2: ffff00084060b170 (&dev->mutex){....}, at: __device_attach+0x38/0x138
[    1.154872] irq event stamp: 63096
[    1.154881] hardirqs last  enabled at (63095): [<ffff800010b74318>] _raw_spin_unlock_irqrestore+0x70/0x78
[    1.154887] hardirqs last disabled at (63096): [<ffff800010b740d8>] _raw_spin_lock_irqsave+0x28/0x80
[    1.154893] softirqs last  enabled at (62254): [<ffff800010080c88>] _stext+0x488/0x564
[    1.154899] softirqs last disabled at (62247): [<ffff8000100fdb3c>] irq_exit+0x114/0x140
[    1.154906] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.6.0-rc6-next-20200318-00094-g45e4089b0bd3 #221
[    1.154911] Hardware name: Texas Instruments K3 J721E SoC (DT)
[    1.154917] Workqueue: events deferred_probe_work_func
[    1.154923] Call trace:
[    1.154928]  dump_backtrace+0x0/0x190
[    1.154933]  show_stack+0x14/0x20
[    1.154940]  dump_stack+0xe0/0x148
[    1.154946]  ___might_sleep+0x150/0x1f0
[    1.154952]  __might_sleep+0x4c/0x80
[    1.154957]  wait_for_completion_timeout+0x40/0x140
[    1.154964]  ti_sci_set_device_state+0xa0/0x158
[    1.154969]  ti_sci_cmd_get_device_exclusive+0x14/0x20
[    1.154977]  ti_sci_dev_start+0x34/0x50
[    1.154984]  genpd_runtime_resume+0x78/0x1f8
[    1.154991]  __rpm_callback+0x3c/0x140
[    1.154996]  rpm_callback+0x20/0x80
[    1.155001]  rpm_resume+0x568/0x758
[    1.155007]  __pm_runtime_resume+0x44/0xb0
[    1.155013]  omap8250_probe+0x2b4/0x508
[    1.155019]  platform_drv_probe+0x50/0xa0
[    1.155023]  really_probe+0xd4/0x318
[    1.155028]  driver_probe_device+0x54/0xe8
[    1.155033]  __device_attach_driver+0x80/0xb8
[    1.155039]  bus_for_each_drv+0x74/0xc0
[    1.155044]  __device_attach+0xdc/0x138
[    1.155049]  device_initial_probe+0x10/0x18
[    1.155053]  bus_probe_device+0x98/0xa0
[    1.155058]  deferred_probe_work_func+0x74/0xb0
[    1.155063]  process_one_work+0x280/0x6e8
[    1.155068]  worker_thread+0x48/0x430
[    1.155073]  kthread+0x108/0x138
[    1.155079]  ret_from_fork+0x10/0x18

To fix the bug we need to first call pm_runtime_enable() prior to any pm_runtime calls.

---
 drivers/tty/serial/8250/8250_omap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/serial/8250/8250_omap.c +1 -1
index da04ba1ecf68a..33df33a9e646a 100644
@@ -1216,11 +1216,11 @@ static int omap8250_probe(struct platform_device *pdev)
 	spin_lock_init(&priv->rx_dma_lock);
 
 	device_init_wakeup(&pdev->dev, true);
+	pm_runtime_enable(&pdev->dev);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, -1);
 
 	pm_runtime_irq_safe(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
 
 	pm_runtime_get_sync(&pdev->dev);
 
Signature · 1 line
2.25.1
author maintainer
#104 lore raw

PATCH 104/166 KVM: Remove CREATE_IRQCHIP/SET_PIT2 race

In reply to Greg Kroah-Hartman

From: Steve Rutherford <[email protected]>

[ Upstream commit 7289fdb5dcdbc5155b5531529c44105868a762f2 ]

Fixes a NULL pointer dereference, caused by the PIT firing an interrupt before the interrupt table has been initialized.

SET_PIT2 can race with the creation of the IRQchip. In particular, if SET_PIT2 is called with a low PIT timer period (after the creation of the IOAPIC, but before the instantiation of the irq routes), the PIT can fire an interrupt at an uninitialized table.

Message-Id: <[email protected]>

---
 arch/x86/kvm/x86.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
arch/x86/kvm/x86.c +8 -2
index 3aed03942d7d4..79fa55de635cc 100644
@@ -4370,10 +4370,13 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		r = -EFAULT;
 		if (copy_from_user(&u.ps, argp, sizeof u.ps))
 			goto out;
+		mutex_lock(&kvm->lock);
 		r = -ENXIO;
 		if (!kvm->arch.vpit)
-			goto out;
+			goto set_pit_out;
 		r = kvm_vm_ioctl_set_pit(kvm, &u.ps);
+set_pit_out:
+		mutex_unlock(&kvm->lock);
 		break;
 	}
 	case KVM_GET_PIT2: {
@@ -4393,10 +4396,13 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		r = -EFAULT;
 		if (copy_from_user(&u.ps2, argp, sizeof(u.ps2)))
 			goto out;
+		mutex_lock(&kvm->lock);
 		r = -ENXIO;
 		if (!kvm->arch.vpit)
-			goto out;
+			goto set_pit2_out;
 		r = kvm_vm_ioctl_set_pit2(kvm, &u.ps2);
+set_pit2_out:
+		mutex_unlock(&kvm->lock);
 		break;
 	}
 	case KVM_REINJECT_CONTROL: {
Signature · 1 line
2.25.1
author maintainer
#95 lore raw

PATCH 95/166 ubifs: Fix out-of-bounds memory access caused by abnormal value of node_len

In reply to Greg Kroah-Hartman

From: Liu Song <[email protected]>

[ Upstream commit acc5af3efa303d5f36cc8c0f61716161f6ca1384 ]

In “ubifs_check_node”, when the value of "node_len" is abnormal, the code will goto label of "out_len" for execution. Then, in the following "ubifs_dump_node", if inode type is "UBIFS_DATA_NODE", in "print_hex_dump", an out-of-bounds access may occur due to the wrong "ch->len".

Therefore, when the value of "node_len" is abnormal, data length should to be adjusted to a reasonable safe range. At this time, structured data is not credible, so dump the corrupted data directly for analysis.

---
 fs/ubifs/io.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
fs/ubifs/io.c +14 -2
index 3be28900bf375..135e95950f513 100644
@@ -237,7 +237,7 @@ int ubifs_is_mapped(const struct ubifs_info *c, int lnum)
 int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum,
 		     int offs, int quiet, int must_chk_crc)
 {
-	int err = -EINVAL, type, node_len;
+	int err = -EINVAL, type, node_len, dump_node = 1;
 	uint32_t crc, node_crc, magic;
 	const struct ubifs_ch *ch = buf;
 
@@ -290,10 +290,22 @@ int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum,
 out_len:
 	if (!quiet)
 		ubifs_err(c, "bad node length %d", node_len);
+	if (type == UBIFS_DATA_NODE && node_len > UBIFS_DATA_NODE_SZ)
+		dump_node = 0;
 out:
 	if (!quiet) {
 		ubifs_err(c, "bad node at LEB %d:%d", lnum, offs);
-		ubifs_dump_node(c, buf);
+		if (dump_node) {
+			ubifs_dump_node(c, buf);
+		} else {
+			int safe_len = min3(node_len, c->leb_size - offs,
+				(int)UBIFS_MAX_DATA_NODE_SZ);
+			pr_err("\tprevent out-of-bounds memory access\n");
+			pr_err("\ttruncated data node length      %d\n", safe_len);
+			pr_err("\tcorrupted data node:\n");
+			print_hex_dump(KERN_ERR, "\t", DUMP_PREFIX_OFFSET, 32, 1,
+					buf, safe_len, 0);
+		}
 		dump_stack();
 	}
 	return err;
Signature · 1 line
2.25.1
author maintainer
#53 lore raw

PATCH 53/166 tools/power/x86/intel_pstate_tracer: changes for python 3 compatibility

In reply to Greg Kroah-Hartman

From: Doug Smythies <[email protected]>

[ Upstream commit e749e09db30c38f1a275945814b0109e530a07b0 ]

Some syntax needs to be more rigorous for python 3. Backwards compatibility tested with python 2.7

---
 .../intel_pstate_tracer.py                    | 22 +++++++++----------
 1 file changed, 11 insertions(+), 11 deletions(-)
tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py +11 -11
index 0b24dd9d01ff2..98c9f2df8aa71 100755
@@ -10,11 +10,11 @@ then this utility enables and collects trace data for a user specified interval
 and generates performance plots.
 
 Prerequisites:
-    Python version 2.7.x
+    Python version 2.7.x or higher
     gnuplot 5.0 or higher
-    gnuplot-py 1.8
+    gnuplot-py 1.8 or higher
     (Most of the distributions have these required packages. They may be called
-     gnuplot-py, phython-gnuplot. )
+     gnuplot-py, phython-gnuplot or phython3-gnuplot, gnuplot-nox, ... )
 
     HWP (Hardware P-States are disabled)
     Kernel config for Linux trace is enabled
@@ -178,7 +178,7 @@ def plot_pstate_cpu_with_sample():
         g_plot('set xlabel "Samples"')
         g_plot('set ylabel "P-State"')
         g_plot('set title "{} : cpu pstate vs. sample : {:%F %H:%M}"'.format(testname, datetime.now()))
-        title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+        title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ')
         plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_SAMPLE, C_TO)
         g_plot('title_list = "{}"'.format(title_list))
         g_plot(plot_str)
@@ -195,7 +195,7 @@ def plot_pstate_cpu():
 #    the following command is really cool, but doesn't work with the CPU masking option because it aborts on the first missing file.
 #    plot_str = 'plot for [i=0:*] file=sprintf("cpu%03d.csv",i) title_s=sprintf("cpu%03d",i) file using 16:7 pt 7 ps 1 title title_s'
 #
-    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ')
     plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_TO)
     g_plot('title_list = "{}"'.format(title_list))
     g_plot(plot_str)
@@ -209,7 +209,7 @@ def plot_load_cpu():
     g_plot('set ylabel "CPU load (percent)"')
     g_plot('set title "{} : cpu loads : {:%F %H:%M}"'.format(testname, datetime.now()))
 
-    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ')
     plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_LOAD)
     g_plot('title_list = "{}"'.format(title_list))
     g_plot(plot_str)
@@ -223,7 +223,7 @@ def plot_frequency_cpu():
     g_plot('set ylabel "CPU Frequency (GHz)"')
     g_plot('set title "{} : cpu frequencies : {:%F %H:%M}"'.format(testname, datetime.now()))
 
-    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ')
     plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_FREQ)
     g_plot('title_list = "{}"'.format(title_list))
     g_plot(plot_str)
@@ -238,7 +238,7 @@ def plot_duration_cpu():
     g_plot('set ylabel "Timer Duration (MilliSeconds)"')
     g_plot('set title "{} : cpu durations : {:%F %H:%M}"'.format(testname, datetime.now()))
 
-    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ')
     plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_DURATION)
     g_plot('title_list = "{}"'.format(title_list))
     g_plot(plot_str)
@@ -252,7 +252,7 @@ def plot_scaled_cpu():
     g_plot('set ylabel "Scaled Busy (Unitless)"')
     g_plot('set title "{} : cpu scaled busy : {:%F %H:%M}"'.format(testname, datetime.now()))
 
-    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ')
     plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_SCALED)
     g_plot('title_list = "{}"'.format(title_list))
     g_plot(plot_str)
@@ -266,7 +266,7 @@ def plot_boost_cpu():
     g_plot('set ylabel "CPU IO Boost (percent)"')
     g_plot('set title "{} : cpu io boost : {:%F %H:%M}"'.format(testname, datetime.now()))
 
-    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ')
     plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_BOOST)
     g_plot('title_list = "{}"'.format(title_list))
     g_plot(plot_str)
@@ -280,7 +280,7 @@ def plot_ghz_cpu():
     g_plot('set ylabel "TSC Frequency (GHz)"')
     g_plot('set title "{} : cpu TSC Frequencies (Sanity check calculation) : {:%F %H:%M}"'.format(testname, datetime.now()))
 
-    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).replace('\n', ' ')
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ')
     plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_GHZ)
     g_plot('title_list = "{}"'.format(title_list))
     g_plot(plot_str)
Signature · 1 line
2.25.1
author maintainer
#86 lore raw

PATCH 86/166 serial: 8250_port: Dont service RX FIFO if throttled

In reply to Greg Kroah-Hartman

From: Vignesh Raghavendra <[email protected]>

[ Upstream commit f19c3f6c8109b8bab000afd35580929958e087a9 ]

When port's throttle callback is called, it should stop pushing any more data into TTY buffer to avoid buffer overflow. This means driver has to stop HW from receiving more data and assert the HW flow control. For UARTs with auto HW flow control (such as 8250_omap) manual assertion of flow control line is not possible and only way is to allow RX FIFO to fill up, thus trigger auto HW flow control logic.

Therefore make sure that 8250 generic IRQ handler does not drain data when port is stopped (i.e UART_LSR_DR is unset in read_status_mask). Not servicing, RX FIFO would trigger auto HW flow control when FIFO occupancy reaches preset threshold, thus halting RX.
Since, error conditions in UART_LSR register are cleared just by reading the register, data has to be drained in case there are FIFO errors, else error information will lost.

---
 drivers/tty/serial/8250/8250_port.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)
drivers/tty/serial/8250/8250_port.c +15 -1
index 07d5925791e1c..9880a50d664fc 100644
@@ -1865,6 +1865,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 	unsigned char status;
 	unsigned long flags;
 	struct uart_8250_port *up = up_to_u8250p(port);
+	bool skip_rx = false;
 
 	if (iir & UART_IIR_NO_INT)
 		return 0;
@@ -1873,7 +1874,20 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 
 	status = serial_port_in(port, UART_LSR);
 
-	if (status & (UART_LSR_DR | UART_LSR_BI)) {
+	/*
+	 * If port is stopped and there are no error conditions in the
+	 * FIFO, then don't drain the FIFO, as this may lead to TTY buffer
+	 * overflow. Not servicing, RX FIFO would trigger auto HW flow
+	 * control when FIFO occupancy reaches preset threshold, thus
+	 * halting RX. This only works when auto HW flow control is
+	 * available.
+	 */
+	if (!(status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS)) &&
+	    (port->status & (UPSTAT_AUTOCTS | UPSTAT_AUTORTS)) &&
+	    !(port->read_status_mask & UART_LSR_DR))
+		skip_rx = true;
+
+	if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) {
 		if (!up->dma || handle_rx_dma(up, iir))
 			status = serial8250_rx_chars(up, status);
 	}
Signature · 1 line
2.25.1
author maintainer
#61 lore raw

PATCH 61/166 selinux: sel_avc_get_stat_idx should increase position index

In reply to Greg Kroah-Hartman

From: Vasily Averin <[email protected]>

[ Upstream commit 8d269a8e2a8f0bca89022f4ec98de460acb90365 ]

If seq_file .next function does not change position index, read after some lseek can generate unexpected output.

$ dd if=/sys/fs/selinux/avc/cache_stats # usual output
lookups hits misses allocations reclaims frees
817223 810034 7189 7189 6992 7037
1934894 1926896 7998 7998 7632 7683
1322812 1317176 5636 5636 5456 5507
1560571 1551548 9023 9023 9056 9115
0+1 records in
0+1 records out
189 bytes copied, 5,1564e-05 s, 3,7 MB/s

$# read after lseek to midle of last line

$ dd if=/sys/fs/selinux/avc/cache_stats bs=180 skip=1
dd: /sys/fs/selinux/avc/cache_stats: cannot skip to specified offset
056 9115   <<<< end of last line
1560571 1551548 9023 9023 9056 9115  <<< whole last line once again
0+1 records in
0+1 records out
45 bytes copied, 8,7221e-05 s, 516 kB/s

$# read after lseek beyond end of of file

$ dd if=/sys/fs/selinux/avc/cache_stats bs=1000 skip=1
dd: /sys/fs/selinux/avc/cache_stats: cannot skip to specified offset
1560571 1551548 9023 9023 9056 9115  <<<< generates whole last line
0+1 records in
0+1 records out
36 bytes copied, 9,0934e-05 s, 396 kB/s

https://bugzilla.kernel.org/show_bug.cgi?id=206283

---
 security/selinux/selinuxfs.c | 1 +
 1 file changed, 1 insertion(+)
security/selinux/selinuxfs.c +1 -0
index 00eed842c491c..bf50fead9f8c0 100644
@@ -1425,6 +1425,7 @@ static struct avc_cache_stats *sel_avc_get_stat_idx(loff_t *idx)
 		*idx = cpu + 1;
 		return &per_cpu(avc_cache_stats, cpu);
 	}
+	(*idx)++;
 	return NULL;
 }
 
Signature · 1 line
2.25.1
author maintainer
#62 lore raw

PATCH 62/166 scsi: lpfc: Fix RQ buffer leakage when no IOCBs available

In reply to Greg Kroah-Hartman

From: James Smart <[email protected]>

[ Upstream commit 39c4f1a965a9244c3ba60695e8ff8da065ec6ac4 ]

The driver is occasionally seeing the following SLI Port error, requiring reset and reinit:

Port Status Event: ... error 1=0x52004a01, error 2=0x218

The failure means an RQ timeout. That is, the adapter had received asynchronous receive frames, ran out of buffer slots to place the frames, and the driver did not replenish the buffer slots before a timeout occurred. The driver should not be so slow in replenishing buffers that a timeout can occur.

When the driver received all the frames of a sequence, it allocates an IOCB to put the frames in. In a situation where there was no IOCB available for the frame of a sequence, the RQ buffer corresponding to the first frame of the sequence was not returned to the FW. Eventually, with enough traffic encountering the situation, the timeout occurred.

Fix by releasing the buffer back to firmware whenever there is no IOCB for the first frame.

[mkp: typo]

---
 drivers/scsi/lpfc/lpfc_sli.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/scsi/lpfc/lpfc_sli.c +4 -0
index 480d2d467f7a6..45445dafc80cf 100644
@@ -17038,6 +17038,10 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
 			list_add_tail(&iocbq->list, &first_iocbq->list);
 		}
 	}
+	/* Free the sequence's header buffer */
+	if (!first_iocbq)
+		lpfc_in_buf_free(vport->phba, &seq_dmabuf->dbuf);
+
 	return first_iocbq;
 }
 
Signature · 1 line
2.25.1
author maintainer
#60 lore raw

PATCH 60/166 audit: CONFIG_CHANGE dont log internal bookkeeping as an event

In reply to Greg Kroah-Hartman

From: Steve Grubb <[email protected]>

[ Upstream commit 70b3eeed49e8190d97139806f6fbaf8964306cdb ]

Common Criteria calls out for any action that modifies the audit trail to be recorded. That usually is interpreted to mean insertion or removal of rules. It is not required to log modification of the inode information since the watch is still in effect. Additionally, if the rule is a never rule and the underlying file is one they do not want events for, they get an event for this bookkeeping update against their wishes.

Since no device/inode info is logged at insertion and no device/inode information is logged on update, there is nothing meaningful being communicated to the admin by the CONFIG_CHANGE updated_rules event. One can assume that the rule was not "modified" because it is still watching the intended target. If the device or inode cannot be resolved, then audit_panic is called which is sufficient.

The correct resolution is to drop logging config_update events since the watch is still in effect but just on another unknown inode.

---
 kernel/audit_watch.c | 2 --
 1 file changed, 2 deletions(-)
kernel/audit_watch.c +0 -2
index 35f1d706bd5b4..ac87820cc0825 100644
@@ -316,8 +316,6 @@ static void audit_update_watch(struct audit_parent *parent,
 			if (oentry->rule.exe)
 				audit_remove_mark(oentry->rule.exe);
 
-			audit_watch_log_rule_change(r, owatch, "updated_rules");
-
 			call_rcu(&oentry->rcu, audit_free_rule_rcu);
 		}
 
Signature · 1 line
2.25.1
author maintainer
#70 lore raw

PATCH 70/166 bpf: Remove recursion prevention from rcu free callback

In reply to Greg Kroah-Hartman

From: Thomas Gleixner <[email protected]>

[ Upstream commit 8a37963c7ac9ecb7f86f8ebda020e3f8d6d7b8a0 ]

If an element is freed via RCU then recursion into BPF instrumentation functions is not a concern. The element is already detached from the map and the RCU callback does not hold any locks on which a kprobe, perf event or tracepoint attached BPF program could deadlock.

---
 kernel/bpf/hashtab.c | 8 --------
 1 file changed, 8 deletions(-)
kernel/bpf/hashtab.c +0 -8
index 6cc090d015f66..ecc58137525bc 100644
@@ -645,15 +645,7 @@ static void htab_elem_free_rcu(struct rcu_head *head)
 	struct htab_elem *l = container_of(head, struct htab_elem, rcu);
 	struct bpf_htab *htab = l->htab;
 
-	/* must increment bpf_prog_active to avoid kprobe+bpf triggering while
-	 * we're calling kfree, otherwise deadlock is possible if kprobes
-	 * are placed somewhere inside of slub
-	 */
-	preempt_disable();
-	__this_cpu_inc(bpf_prog_active);
 	htab_elem_free(htab, l);
-	__this_cpu_dec(bpf_prog_active);
-	preempt_enable();
 }
 
 static void htab_put_fd_value(struct bpf_htab *htab, struct htab_elem *l)
Signature · 1 line
2.25.1
author maintainer
#69 lore raw

PATCH 69/166 x86/pkeys: Add check for pkey "overflow"

In reply to Greg Kroah-Hartman

From: Dave Hansen <[email protected]>

[ Upstream commit 16171bffc829272d5e6014bad48f680cb50943d9 ]

Alex Shi reported the pkey macros above arch_set_user_pkey_access() to be unused. They are unused, and even refer to a nonexistent CONFIG option.

But, they might have served a good use, which was to ensure that the code does not try to set values that would not fit in the PKRU register. As it stands, a too-large 'pkey' value would be likely to silently overflow the u32 new_pkru_bits.

Add a check to look for overflows. Also add a comment to remind any future developer to closely examine the types used to store pkey values if arch_max_pkey() ever changes.

This boots and passes the x86 pkey selftests.

---
 arch/x86/include/asm/pkeys.h | 5 +++++
 arch/x86/kernel/fpu/xstate.c | 9 +++++++--
 2 files changed, 12 insertions(+), 2 deletions(-)
arch/x86/include/asm/pkeys.h +5 -0
index 851c04b7a0922..1572a436bc087 100644
@@ -4,6 +4,11 @@
 
 #define ARCH_DEFAULT_PKEY	0
 
+/*
+ * If more than 16 keys are ever supported, a thorough audit
+ * will be necessary to ensure that the types that store key
+ * numbers and masks have sufficient capacity.
+ */
 #define arch_max_pkey() (boot_cpu_has(X86_FEATURE_OSPKE) ? 16 : 1)
 
 extern int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
arch/x86/kernel/fpu/xstate.c +7 -2
index 4b900035f2202..601a5da1d196a 100644
@@ -907,8 +907,6 @@ const void *get_xsave_field_ptr(int xsave_state)
 
 #ifdef CONFIG_ARCH_HAS_PKEYS
 
-#define NR_VALID_PKRU_BITS (CONFIG_NR_PROTECTION_KEYS * 2)
-#define PKRU_VALID_MASK (NR_VALID_PKRU_BITS - 1)
 /*
  * This will go out and modify PKRU register to set the access
  * rights for @pkey to @init_val.
@@ -927,6 +925,13 @@ int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
 	if (!boot_cpu_has(X86_FEATURE_OSPKE))
 		return -EINVAL;
 
+	/*
+	 * This code should only be called with valid 'pkey'
+	 * values originating from in-kernel users.  Complain
+	 * if a bad value is observed.
+	 */
+	WARN_ON_ONCE(pkey >= arch_max_pkey());
+
 	/* Set the bits we need in PKRU:  */
 	if (init_val & PKEY_DISABLE_ACCESS)
 		new_pkru_bits |= PKRU_AD_BIT;
Signature · 1 line
2.25.1
author maintainer
#71 lore raw

PATCH 71/166 dmaengine: tegra-apb: Prevent race conditions on channels freeing

In reply to Greg Kroah-Hartman

From: Dmitry Osipenko <[email protected]>

[ Upstream commit 8e84172e372bdca20c305d92d51d33640d2da431 ]

It's incorrect to check the channel's "busy" state without taking a lock. That shouldn't cause any real troubles, nevertheless it's always better not to have any race conditions in the code.

---
 drivers/dma/tegra20-apb-dma.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/dma/tegra20-apb-dma.c +1 -2
index 3402494cadf99..78e098b4bd89e 100644
@@ -1208,8 +1208,7 @@ static void tegra_dma_free_chan_resources(struct dma_chan *dc)
 
 	dev_dbg(tdc2dev(tdc), "Freeing channel %d\n", tdc->id);
 
-	if (tdc->busy)
-		tegra_dma_terminate_all(dc);
+	tegra_dma_terminate_all(dc);
 
 	spin_lock_irqsave(&tdc->lock, flags);
 	list_splice_init(&tdc->pending_sg_req, &sg_req_list);
Signature · 1 line
2.25.1
author maintainer
#68 lore raw

PATCH 68/166 media: staging/imx: Missing assignment in imx_media_capture_device_register()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit ef0ed05dcef8a74178a8b480cce23a377b1de2b8 ]

There was supposed to be a "ret = " assignment here, otherwise the error handling on the next line won't work.

Fixes 64b5a49df486 ("[media] media: imx: Add Capture Device Interface")
---
 drivers/staging/media/imx/imx-media-capture.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/media/imx/imx-media-capture.c +1 -1
index ea145bafb880a..8ff8843df5141 100644
@@ -685,7 +685,7 @@ int imx_media_capture_device_register(struct imx_media_video_dev *vdev)
 	/* setup default format */
 	fmt_src.pad = priv->src_sd_pad;
 	fmt_src.which = V4L2_SUBDEV_FORMAT_ACTIVE;
-	v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt_src);
+	ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt_src);
 	if (ret) {
 		v4l2_err(sd, "failed to get src_sd format\n");
 		goto unreg;
Signature · 1 line
2.25.1
author maintainer
#27 lore raw

PATCH 27/166 ALSA: hda/realtek - Couldnt detect Mic if booting with headset plugged

In reply to Greg Kroah-Hartman

From: Hui Wang <[email protected]>

commit 3f74249057827c5f6676c41c18f6be12ce1469ce upstream.

We found a Mic detection issue on many Lenovo laptops, those laptops belong to differnt models and they have different audio design like internal mic connects to the codec or PCH, they all have this problem, the problem is if plugging a headset before powerup/reboot the machine, after booting up, the headphone could be detected but Mic couldn't. If we plug out and plug in the headset, both headphone and Mic could be detected then.

Through debugging we found the codec on those laptops are same, it is alc257, and if we don't disable the 3k pulldown in alc256_shutup(), the issue will be fixed. So far there is no pop noise or power consumption regression on those laptops after this change.

---
 sound/pci/hda/patch_realtek.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
sound/pci/hda/patch_realtek.c +5 -1
@@ -3154,7 +3154,11 @@ static void alc256_shutup(struct hda_cod
 
 	/* 3k pull low control for Headset jack. */
 	/* NOTE: call this before clearing the pin, otherwise codec stalls */
-	alc_update_coef_idx(codec, 0x46, 0, 3 << 12);
+	/* If disable 3k pulldown control for alc257, the Mic detection will not work correctly
+	 * when booting with headset plugged. So skip setting it for the codec alc257
+	 */
+	if (codec->core.vendor_id != 0x10ec0257)
+		alc_update_coef_idx(codec, 0x46, 0, 3 << 12);
 
 	snd_hda_codec_write(codec, hp_pin, 0,
 			    AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0);
author maintainer
#25 lore raw

PATCH 25/166 x86/ioapic: Unbreak check_timer()

In reply to Greg Kroah-Hartman

From: Thomas Gleixner <[email protected]>

commit 86a82ae0b5095ea24c55898a3f025791e7958b21 upstream.

Several people reported in the kernel bugzilla that between v4.12 and v4.13 the magic which works around broken hardware and BIOSes to find the proper timer interrupt delivery mode stopped working for some older affected platforms which need to fall back to ExtINT delivery mode.

The reason is that the core code changed to keep track of the masked and disabled state of an interrupt line more accurately to avoid the expensive hardware operations.

That broke an assumption in i8259_make_irq() which invokes

     disable_irq_nosync();
     irq_set_chip_and_handler();
     enable_irq();

Up to v4.12 this worked because enable_irq() unconditionally unmasked the interrupt line, but after the state tracking improvements this is not longer the case because the IO/APIC uses lazy disabling. So the line state is unmasked which means that enable_irq() does not call into the new irq chip to unmask it.

In principle this is a shortcoming of the core code, but it's more than unclear whether the core code should try to reset state. At least this cannot be done unconditionally as that would break other existing use cases where the chip type is changed, e.g. when changing the trigger type, but the callers expect the state to be preserved.

As the way how check_timer() is switching the delivery modes is truly unique, the obvious fix is to simply unmask the i8259 manually after changing the mode to ExtINT delivery and switching the irq chip to the legacy PIC.

Note, that the fixes tag is not really precise, but identifies the commit which broke the assumptions in the IO/APIC and i8259 code and that's the kernel version to which this needs to be backported.

Fixes bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls")
Reported-by [email protected]
Reported-by [email protected]
Reported-by [email protected]
Reported-by [email protected]
Reported-by [email protected]
---
 arch/x86/kernel/apic/io_apic.c |    1 +
 1 file changed, 1 insertion(+)
arch/x86/kernel/apic/io_apic.c +1 -0
@@ -2160,6 +2160,7 @@ static inline void __init check_timer(vo
 	legacy_pic->init(0);
 	legacy_pic->make_irq(0);
 	apic_write(APIC_LVT0, APIC_DM_EXTINT);
+	legacy_pic->unmask(0);
 
 	unlock_ExtINT_logic();
 
author maintainer
#51 lore raw

PATCH 51/166 ar5523: Add USB ID of SMCWUSBT-G2 wireless adapter

In reply to Greg Kroah-Hartman

From: Mert Dirik <[email protected]>

[ Upstream commit 5b362498a79631f283578b64bf6f4d15ed4cc19a ]

Add the required USB ID for running SMCWUSBT-G2 wireless adapter (SMC "EZ Connect g").

This device uses ar5523 chipset and requires firmware to be loaded. Even though pid of the device is 4507, this patch adds it as 4506 so that AR5523_DEVICE_UG macro can set the AR5523_FLAG_PRE_FIRMWARE flag for pid 4507.

---
 drivers/net/wireless/ath/ar5523/ar5523.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/wireless/ath/ar5523/ar5523.c +2 -0
index ad4a1efc57c97..e1a1d27427cc9 100644
@@ -1771,6 +1771,8 @@ static const struct usb_device_id ar5523_id_table[] = {
 	AR5523_DEVICE_UX(0x0846, 0x4300),	/* Netgear / WG111U */
 	AR5523_DEVICE_UG(0x0846, 0x4250),	/* Netgear / WG111T */
 	AR5523_DEVICE_UG(0x0846, 0x5f00),	/* Netgear / WPN111 */
+	AR5523_DEVICE_UG(0x083a, 0x4506),	/* SMC / EZ Connect
+						   SMCWUSBT-G2 */
 	AR5523_DEVICE_UG(0x157e, 0x3006),	/* Umedia / AR5523_1 */
 	AR5523_DEVICE_UX(0x157e, 0x3205),	/* Umedia / AR5523_2 */
 	AR5523_DEVICE_UG(0x157e, 0x3006),	/* Umedia / TEW444UBEU */
Signature · 1 line
2.25.1
author maintainer
#52 lore raw

PATCH 52/166 selftests/ftrace: fix glob selftest

In reply to Greg Kroah-Hartman

From: Sven Schnelle <[email protected]>

[ Upstream commit af4ddd607dff7aabd466a4a878e01b9f592a75ab ]

test.d/ftrace/func-filter-glob.tc is failing on s390 because it has ARCH_INLINE_SPIN_LOCK and friends set to 'y'. So the usual __raw_spin_lock symbol isn't in the ftrace function list. Change '*aw*lock' to '*spin*lock' which would hopefully match some of the locking functions on all platforms.

---
 .../testing/selftests/ftrace/test.d/ftrace/func-filter-glob.tc  | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/ftrace/test.d/ftrace/func-filter-glob.tc +1 -1
index 27a54a17da65d..f4e92afab14b2 100644
@@ -30,7 +30,7 @@ ftrace_filter_check '*schedule*' '^.*schedule.*$'
 ftrace_filter_check 'schedule*' '^schedule.*$'
 
 # filter by *mid*end
-ftrace_filter_check '*aw*lock' '.*aw.*lock$'
+ftrace_filter_check '*pin*lock' '.*pin.*lock$'
 
 # filter by start*mid*
 ftrace_filter_check 'mutex*try*' '^mutex.*try.*'
Signature · 1 line
2.25.1
author maintainer
#40 lore raw

PATCH 40/166 debugfs: Fix !DEBUG_FS debugfs_create_automount

In reply to Greg Kroah-Hartman

From: Kusanagi Kouichi <[email protected]>

[ Upstream commit 4250b047039d324e0ff65267c8beb5bad5052a86 ]

If DEBUG_FS=n, compile fails with the following error:

kernel/trace/trace.c: In function 'tracing_init_dentry':
kernel/trace/trace.c:8658:9: error: passing argument 3 of 'debugfs_create_automount' from incompatible pointer type [-Werror=incompatible-pointer-types]

 8658 |         trace_automount, NULL);
      |         ^~~~~~~~~~~~~~~
      |         |
      |         struct vfsmount * (*)(struct dentry *, void *)
In file included from kernel/trace/trace.c:24:
./include/linux/debugfs.h:206:25: note: expected 'struct vfsmount * (*)(void *)' but argument is of type 'struct vfsmount * (*)(struct dentry *, void *)'
  206 |      struct vfsmount *(*f)(void *),
      |      ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~
---
 include/linux/debugfs.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
include/linux/debugfs.h +3 -2
index b93efc8feecd1..755033acd2b0d 100644
@@ -77,6 +77,8 @@ static const struct file_operations __fops = {				\
 	.llseek  = no_llseek,						\
 }
 
+typedef struct vfsmount *(*debugfs_automount_t)(struct dentry *, void *);
+
 #if defined(CONFIG_DEBUG_FS)
 
 struct dentry *debugfs_lookup(const char *name, struct dentry *parent);
@@ -98,7 +100,6 @@ struct dentry *debugfs_create_dir(const char *name, struct dentry *parent);
 struct dentry *debugfs_create_symlink(const char *name, struct dentry *parent,
 				      const char *dest);
 
-typedef struct vfsmount *(*debugfs_automount_t)(struct dentry *, void *);
 struct dentry *debugfs_create_automount(const char *name,
 					struct dentry *parent,
 					debugfs_automount_t f,
@@ -227,7 +228,7 @@ static inline struct dentry *debugfs_create_symlink(const char *name,
 
 static inline struct dentry *debugfs_create_automount(const char *name,
 					struct dentry *parent,
-					struct vfsmount *(*f)(void *),
+					debugfs_automount_t f,
 					void *data)
 {
 	return ERR_PTR(-ENODEV);
Signature · 1 line
2.25.1
author maintainer
#41 lore raw

PATCH 41/166 CIFS: Properly process SMB3 lease breaks

In reply to Greg Kroah-Hartman

From: Pavel Shilovsky <[email protected]>

[ Upstream commit 9bd4540836684013aaad6070a65d6fcdd9006625 ]

Currenly we doesn't assume that a server may break a lease from RWH to RW which causes us setting a wrong lease state on a file and thus mistakenly flushing data and byte-range locks and purging cached data on the client. This leads to performance degradation because subsequent IOs go directly to the server.

Fix this by propagating new lease state and epoch values to the oplock break handler through cifsFileInfo structure and removing the use of cifsInodeInfo flags for that. It allows to avoid some races of several lease/oplock breaks using those flags in parallel.

---
 fs/cifs/cifsglob.h |  9 ++++++---
 fs/cifs/file.c     | 10 +++++++---
 fs/cifs/misc.c     | 17 +++--------------
 fs/cifs/smb1ops.c  |  8 +++-----
 fs/cifs/smb2misc.c | 32 +++++++-------------------------
 fs/cifs/smb2ops.c  | 44 ++++++++++++++++++++++++++++++--------------
 fs/cifs/smb2pdu.h  |  2 +-
 7 files changed, 57 insertions(+), 65 deletions(-)
fs/cifs/cifsglob.h +6 -3
index 600bb838c15b8..f166fcb48ac0e 100644
@@ -246,8 +246,9 @@ struct smb_version_operations {
 	int (*check_message)(char *, unsigned int, struct TCP_Server_Info *);
 	bool (*is_oplock_break)(char *, struct TCP_Server_Info *);
 	int (*handle_cancelled_mid)(char *, struct TCP_Server_Info *);
-	void (*downgrade_oplock)(struct TCP_Server_Info *,
-					struct cifsInodeInfo *, bool);
+	void (*downgrade_oplock)(struct TCP_Server_Info *server,
+				 struct cifsInodeInfo *cinode, __u32 oplock,
+				 unsigned int epoch, bool *purge_cache);
 	/* process transaction2 response */
 	bool (*check_trans2)(struct mid_q_entry *, struct TCP_Server_Info *,
 			     char *, int);
@@ -1092,6 +1093,8 @@ struct cifsFileInfo {
 	unsigned int f_flags;
 	bool invalidHandle:1;	/* file closed via session abend */
 	bool oplock_break_cancelled:1;
+	unsigned int oplock_epoch; /* epoch from the lease break */
+	__u32 oplock_level; /* oplock/lease level from the lease break */
 	int count;
 	spinlock_t file_info_lock; /* protects four flag/count fields above */
 	struct mutex fh_mutex; /* prevents reopen race after dead ses*/
@@ -1223,7 +1226,7 @@ struct cifsInodeInfo {
 	unsigned int epoch;		/* used to track lease state changes */
 #define CIFS_INODE_PENDING_OPLOCK_BREAK   (0) /* oplock break in progress */
 #define CIFS_INODE_PENDING_WRITERS	  (1) /* Writes in progress */
-#define CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2 (2) /* Downgrade oplock to L2 */
+#define CIFS_INODE_FLAG_UNUSED		  (2) /* Unused flag */
 #define CIFS_INO_DELETE_PENDING		  (3) /* delete pending on server */
 #define CIFS_INO_INVALID_MAPPING	  (4) /* pagecache is invalid */
 #define CIFS_INO_LOCK			  (5) /* lock bit for synchronization */
fs/cifs/file.c +7 -3
index 72e7cbfb325a6..0981731132ec0 100644
@@ -4135,12 +4135,13 @@ void cifs_oplock_break(struct work_struct *work)
 	struct cifs_tcon *tcon = tlink_tcon(cfile->tlink);
 	struct TCP_Server_Info *server = tcon->ses->server;
 	int rc = 0;
+	bool purge_cache = false;
 
 	wait_on_bit(&cinode->flags, CIFS_INODE_PENDING_WRITERS,
 			TASK_UNINTERRUPTIBLE);
 
-	server->ops->downgrade_oplock(server, cinode,
-		test_bit(CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2, &cinode->flags));
+	server->ops->downgrade_oplock(server, cinode, cfile->oplock_level,
+				      cfile->oplock_epoch, &purge_cache);
 
 	if (!CIFS_CACHE_WRITE(cinode) && CIFS_CACHE_READ(cinode) &&
 						cifs_has_mand_locks(cinode)) {
@@ -4155,18 +4156,21 @@ void cifs_oplock_break(struct work_struct *work)
 		else
 			break_lease(inode, O_WRONLY);
 		rc = filemap_fdatawrite(inode->i_mapping);
-		if (!CIFS_CACHE_READ(cinode)) {
+		if (!CIFS_CACHE_READ(cinode) || purge_cache) {
 			rc = filemap_fdatawait(inode->i_mapping);
 			mapping_set_error(inode->i_mapping, rc);
 			cifs_zap_mapping(inode);
 		}
 		cifs_dbg(FYI, "Oplock flush inode %p rc %d\n", inode, rc);
+		if (CIFS_CACHE_WRITE(cinode))
+			goto oplock_break_ack;
 	}
 
 	rc = cifs_push_locks(cfile);
 	if (rc)
 		cifs_dbg(VFS, "Push locks rc = %d\n", rc);
 
+oplock_break_ack:
 	/*
 	 * releasing stale oplock after recent reconnect of smb session using
 	 * a now incorrect file handle is not a data integrity issue but do
fs/cifs/misc.c +3 -14
index 76f1649ab444f..d0e024856c0d4 100644
@@ -473,21 +473,10 @@ is_valid_oplock_break(char *buffer, struct TCP_Server_Info *srv)
 				set_bit(CIFS_INODE_PENDING_OPLOCK_BREAK,
 					&pCifsInode->flags);
 
-				/*
-				 * Set flag if the server downgrades the oplock
-				 * to L2 else clear.
-				 */
-				if (pSMB->OplockLevel)
-					set_bit(
-					   CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
-					   &pCifsInode->flags);
-				else
-					clear_bit(
-					   CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
-					   &pCifsInode->flags);
-
-				cifs_queue_oplock_break(netfile);
+				netfile->oplock_epoch = 0;
+				netfile->oplock_level = pSMB->OplockLevel;
 				netfile->oplock_break_cancelled = false;
+				cifs_queue_oplock_break(netfile);
 
 				spin_unlock(&tcon->open_file_lock);
 				spin_unlock(&cifs_tcp_ses_lock);
fs/cifs/smb1ops.c +3 -5
index 483458340b10c..9b271ae641c19 100644
@@ -379,12 +379,10 @@ coalesce_t2(char *second_buf, struct smb_hdr *target_hdr)
 
 static void
 cifs_downgrade_oplock(struct TCP_Server_Info *server,
-			struct cifsInodeInfo *cinode, bool set_level2)
+		      struct cifsInodeInfo *cinode, __u32 oplock,
+		      unsigned int epoch, bool *purge_cache)
 {
-	if (set_level2)
-		cifs_set_oplock_level(cinode, OPLOCK_READ);
-	else
-		cifs_set_oplock_level(cinode, 0);
+	cifs_set_oplock_level(cinode, oplock);
 }
 
 static bool
fs/cifs/smb2misc.c +7 -25
index ff2ad15f67d63..0c6e5450ff765 100644
@@ -496,7 +496,7 @@ smb2_tcon_has_lease(struct cifs_tcon *tcon, struct smb2_lease_break *rsp,
 
 		cifs_dbg(FYI, "found in the open list\n");
 		cifs_dbg(FYI, "lease key match, lease break 0x%x\n",
-			 le32_to_cpu(rsp->NewLeaseState));
+			 lease_state);
 
 		if (ack_req)
 			cfile->oplock_break_cancelled = false;
@@ -505,17 +505,8 @@ smb2_tcon_has_lease(struct cifs_tcon *tcon, struct smb2_lease_break *rsp,
 
 		set_bit(CIFS_INODE_PENDING_OPLOCK_BREAK, &cinode->flags);
 
-		/*
-		 * Set or clear flags depending on the lease state being READ.
-		 * HANDLE caching flag should be added when the client starts
-		 * to defer closing remote file handles with HANDLE leases.
-		 */
-		if (lease_state & SMB2_LEASE_READ_CACHING_HE)
-			set_bit(CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
-				&cinode->flags);
-		else
-			clear_bit(CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
-				  &cinode->flags);
+		cfile->oplock_epoch = le16_to_cpu(rsp->Epoch);
+		cfile->oplock_level = lease_state;
 
 		cifs_queue_oplock_break(cfile);
 		kfree(lw);
@@ -538,7 +529,7 @@ smb2_tcon_has_lease(struct cifs_tcon *tcon, struct smb2_lease_break *rsp,
 
 		cifs_dbg(FYI, "found in the pending open list\n");
 		cifs_dbg(FYI, "lease key match, lease break 0x%x\n",
-			 le32_to_cpu(rsp->NewLeaseState));
+			 lease_state);
 
 		open->oplock = lease_state;
 	}
@@ -650,18 +641,9 @@ smb2_is_valid_oplock_break(char *buffer, struct TCP_Server_Info *server)
 				set_bit(CIFS_INODE_PENDING_OPLOCK_BREAK,
 					&cinode->flags);
 
-				/*
-				 * Set flag if the server downgrades the oplock
-				 * to L2 else clear.
-				 */
-				if (rsp->OplockLevel)
-					set_bit(
-					   CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
-					   &cinode->flags);
-				else
-					clear_bit(
-					   CIFS_INODE_DOWNGRADE_OPLOCK_TO_L2,
-					   &cinode->flags);
+				cfile->oplock_epoch = 0;
+				cfile->oplock_level = rsp->OplockLevel;
+
 				spin_unlock(&cfile->file_info_lock);
 
 				cifs_queue_oplock_break(cfile);
fs/cifs/smb2ops.c +30 -14

73 lines not on this page · raw message

fs/cifs/smb2pdu.h +1 -1
index bad458a2b579e..f8baa54c83008 100644
@@ -1046,7 +1046,7 @@ struct smb2_oplock_break {
 struct smb2_lease_break {
 	struct smb2_hdr hdr;
 	__le16 StructureSize; /* Must be 44 */
-	__le16 Reserved;
+	__le16 Epoch;
 	__le32 Flags;
 	__u8   LeaseKey[16];
 	__le32 CurrentLeaseState;
Signature · 1 line
2.25.1
author maintainer
#45 lore raw

PATCH 45/166 seqlock: Require WRITE_ONCE surrounding raw_seqcount_barrier

In reply to Greg Kroah-Hartman

From: Marco Elver <[email protected]>

[ Upstream commit bf07132f96d426bcbf2098227fb680915cf44498 ]

This patch proposes to require marked atomic accesses surrounding raw_write_seqcount_barrier. We reason that otherwise there is no way to guarantee propagation nor atomicity of writes before/after the barrier [1]. For example, consider the compiler tears stores either before or after the barrier; in this case, readers may observe a partial value, and because readers are unaware that writes are going on (writes are not in a seq-writer critical section), will complete the seq-reader critical section while having observed some partial state.
[1] https://lwn.net/Articles/793253/

This came up when designing and implementing KCSAN, because KCSAN would flag these accesses as data-races. After careful analysis, our reasoning as above led us to conclude that the best thing to do is to propose an amendment to the raw_seqcount_barrier usage.

---
 include/linux/seqlock.h | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
include/linux/seqlock.h +9 -2
index f189a8a3bbb88..7b3b5d05ab0de 100644
@@ -243,6 +243,13 @@ static inline void raw_write_seqcount_end(seqcount_t *s)
  * usual consistency guarantee. It is one wmb cheaper, because we can
  * collapse the two back-to-back wmb()s.
  *
+ * Note that, writes surrounding the barrier should be declared atomic (e.g.
+ * via WRITE_ONCE): a) to ensure the writes become visible to other threads
+ * atomically, avoiding compiler optimizations; b) to document which writes are
+ * meant to propagate to the reader critical section. This is necessary because
+ * neither writes before and after the barrier are enclosed in a seq-writer
+ * critical section that would ensure readers are aware of ongoing writes.
+ *
  *      seqcount_t seq;
  *      bool X = true, Y = false;
  *
@@ -262,11 +269,11 @@ static inline void raw_write_seqcount_end(seqcount_t *s)
  *
  *      void write(void)
  *      {
- *              Y = true;
+ *              WRITE_ONCE(Y, true);
  *
  *              raw_write_seqcount_barrier(seq);
  *
- *              X = false;
+ *              WRITE_ONCE(X, false);
  *      }
  */
 static inline void raw_write_seqcount_barrier(seqcount_t *s)
Signature · 1 line
2.25.1
author maintainer
#42 lore raw

PATCH 42/166 kernel/sys.c: avoid copying possible padding bytes in copy_to_user

In reply to Greg Kroah-Hartman

From: Joe Perches <[email protected]>

[ Upstream commit 5e1aada08cd19ea652b2d32a250501d09b02ff2e ]

Initialization is not guaranteed to zero padding bytes so use an explicit memset instead to avoid leaking any kernel content in any possible padding bytes.

---
 kernel/sys.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
kernel/sys.c +3 -1
index ab96b98823473..2e4f017f7c5aa 100644
@@ -1217,11 +1217,13 @@ SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
 
 SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
 {
-	struct oldold_utsname tmp = {};
+	struct oldold_utsname tmp;
 
 	if (!name)
 		return -EFAULT;
 
+	memset(&tmp, 0, sizeof(tmp));
+
 	down_read(&uts_sem);
 	memcpy(&tmp.sysname, &utsname()->sysname, __OLD_UTS_LEN);
 	memcpy(&tmp.nodename, &utsname()->nodename, __OLD_UTS_LEN);
Signature · 1 line
2.25.1
author maintainer
#22 lore raw

PATCH 22/166 ASoC: kirkwood: fix IRQ error handling

In reply to Greg Kroah-Hartman

From: Russell King <[email protected]>

[ Upstream commit 175fc928198236037174e5c5c066fe3c4691903e ]

Propagate the error code from request_irq(), rather than returning -EBUSY.

---
 sound/soc/kirkwood/kirkwood-dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/kirkwood/kirkwood-dma.c +1 -1
index cf23af159acf4..35ca8e8bb5e52 100644
@@ -136,7 +136,7 @@ static int kirkwood_dma_open(struct snd_pcm_substream *substream)
 		err = request_irq(priv->irq, kirkwood_dma_irq, IRQF_SHARED,
 				  "kirkwood-i2s", priv);
 		if (err)
-			return -EBUSY;
+			return err;
 
 		/*
 		 * Enable Error interrupts. We're only ack'ing them but
Signature · 1 line
2.25.1