Skip to contentSkip to conversation

utimensat01: Test all available FS and handle FS with no attributes

PATCH New Richard Palethorpe 4 participants 5 messages Sep 29, 2020 – Sep 30, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 utimensat01: Test all available FS and handle FS with no attributes

If tmpdir is mounted on tmpfs then the test will fail with ENOTTY as this FS apparently does not support file attributes (inode flags). Instead we can test with all the available filesystems, some of which may support file attributes.

Also if we now get ENOTTY then it is assumed the file system does not support attributes (or at least the attribute we want to test) and the test fails with TCONF. However the underlying FS could return some other errno, but it is not clear what else to expect, if anything.

---
 .../kernel/syscalls/utimensat/utimensat01.c      | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
testcases/kernel/syscalls/utimensat/utimensat01.c +12 -4
index fe490f441..5410c345a 100644
@@ -21,8 +21,9 @@
 #include "time64_variants.h"
 #include "tst_timer.h"
 
-#define TEST_FILE	"test_file"
-#define TEST_DIR	"test_dir"
+#define MNTPOINT 	"mntpoint"
+#define TEST_FILE	MNTPOINT"/test_file"
+#define TEST_DIR	MNTPOINT"/test_dir"
 
 static void *bad_addr;
 
@@ -182,7 +183,12 @@ static void change_attr(struct test_case *tc, int fd, int set)
 	if (!tc->attr)
 		return;
 
-	SAFE_IOCTL(fd, FS_IOC_GETFLAGS, &attr);
+	if (ioctl(fd, FS_IOC_GETFLAGS, &attr)) {
+		if (errno == ENOTTY)
+			tst_brk(TCONF | TERRNO, "Attributes not supported by FS");
+		else
+			tst_brk(TBROK | TERRNO, "ioctl(fd, FS_IOC_GETFLAGS, &attr) failed");
+	}
 
 	if (set)
 		attr |= tc->attr;
@@ -305,5 +311,7 @@ static struct tst_test test = {
 	.test_variants = ARRAY_SIZE(variants),
 	.setup = setup,
 	.needs_root = 1,
-	.needs_tmpdir = 1,
+	.mount_device = 1,
+	.mntpoint = MNTPOINT,
+	.all_filesystems = 1,
 };
Signature · 1 line
2.28.0
#1 lore raw

PATCH 1/1 utimensat01: Test all available FS and handle FS with no attributes

Hi Richie,

LGTM.

Although this fails on NTFS and exfat and FUSE.
I don't remember which flag removes these filesystems, there was some workaround. Cyril, Li, Jan, do you remember?

Kind regards,
Petr

tst_test.c:1248: TINFO: Timeout per run is 0h 05m 00s
utimensat01.c:298: TINFO: Testing variant: syscall with old kernel spec
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315525600: 315525600) utimensat01.c:282: TPASS: 0: utimensat() passed
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315525600: 315525600) utimensat01.c:282: TPASS: 1: utimensat() passed
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315525600: 315525600) utimensat01.c:274: TFAIL: 2: atime shouldn't have changed but did
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315525600: 315525600) utimensat01.c:278: TFAIL: 3: mtime shouldn't have changed but did
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315525600: 315525600) utimensat01.c:274: TFAIL: 4: atime shouldn't have changed but did
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315525600: 315525600) utimensat01.c:282: TPASS: 5: utimensat() passed
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315525600: 315525600) utimensat01.c:282: TPASS: 6: utimensat() passed
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315525600: 315525600) utimensat01.c:282: TPASS: 7: utimensat() passed
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315525600: 315525600) utimensat01.c:274: TFAIL: 8: atime shouldn't have changed but did
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315525600: 315525600) utimensat01.c:278: TFAIL: 9: mtime shouldn't have changed but did
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315525600: 315525600) utimensat01.c:274: TFAIL: 10: atime shouldn't have changed but did
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315525600: 315525600) utimensat01.c:282: TPASS: 11: utimensat() passed
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315525600: 315525600) utimensat01.c:188: TCONF: Attributes not supported by FS: ENOTTY (25)
tst_test.c:1316: TINFO: Testing on exfat
tst_mkfs.c:89: TINFO: Formatting /dev/loop1 with exfat opts='' extra opts=''
tst_test.c:1248: TINFO: Timeout per run is 0h 05m 00s
utimensat01.c:298: TINFO: Testing variant: syscall with old kernel spec
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315532800: 315532800) utimensat01.c:282: TPASS: 0: utimensat() passed
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315532800: 315532800) utimensat01.c:282: TPASS: 1: utimensat() passed
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315532800: 315532800) utimensat01.c:274: TFAIL: 2: atime shouldn't have changed but did
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315532800: 315532800) utimensat01.c:278: TFAIL: 3: mtime shouldn't have changed but did
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315532800: 315532800) utimensat01.c:274: TFAIL: 4: atime shouldn't have changed but did
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315532800: 315532800) utimensat01.c:282: TPASS: 5: utimensat() passed
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315532800: 315532800) utimensat01.c:282: TPASS: 6: utimensat() passed
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315532800: 315532800) utimensat01.c:282: TPASS: 7: utimensat() passed
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315532800: 315532800) utimensat01.c:274: TFAIL: 8: atime shouldn't have changed but did
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315532800: 315532800) utimensat01.c:278: TFAIL: 9: mtime shouldn't have changed but did
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315532800: 315532800) utimensat01.c:274: TFAIL: 10: atime shouldn't have changed but did
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315532800: 315532800) utimensat01.c:282: TPASS: 11: utimensat() passed
utimensat01.c:213: TFAIL: Failed to reset access and modification time (315532800: 315532800) utimensat01.c:188: TCONF: Attributes not supported by FS: ENOTTY (25)
tst_test.c:1316: TINFO: Testing on ntfs
tst_mkfs.c:89: TINFO: Formatting /dev/loop1 with ntfs opts='' extra opts=''
The partition start sector was not specified for /dev/loop1 and it could not be obtained automatically. It has been set to 0. The number of sectors per track was not specified for /dev/loop1 and it could not be obtained automatically. It has been set to 0. The number of heads was not specified for /dev/loop1 and it could not be obtained automatically. It has been set to 0. To boot from a device, Windows needs the 'partition start sector', the 'sectors per track' and the 'number of heads' to be set. Windows will not be able to boot from this device.
safe_macros.c:755: TINFO: Trying FUSE...
tst_test.c:1248: TINFO: Timeout per run is 0h 05m 00s
utimensat01.c:298: TINFO: Testing variant: syscall with old kernel spec

utimensat01.c:282: TPASS:  0: utimensat() passed
utimensat01.c:282: TPASS:  1: utimensat() passed
utimensat01.c:282: TPASS:  2: utimensat() passed
utimensat01.c:274: TFAIL:  3: atime should have changed but didn't
utimensat01.c:278: TFAIL:  4: mtime should have changed but didn't
utimensat01.c:282: TPASS:  5: utimensat() passed
utimensat01.c:282: TPASS:  6: utimensat() passed
utimensat01.c:282: TPASS:  7: utimensat() passed
utimensat01.c:282: TPASS:  8: utimensat() passed
utimensat01.c:274: TFAIL:  9: atime should have changed but didn't

utimensat01.c:278: TFAIL: 10: mtime should have changed but didn't utimensat01.c:282: TPASS: 11: utimensat() passed utimensat01.c:190: TBROK: ioctl(fd, FS_IOC_GETFLAGS, &attr) failed: EINVAL (22)

#2 lore raw

PATCH 1/1 utimensat01: Test all available FS and handle FS with no attributes

Hi!

Quoted 3 lines

Although this fails on NTFS and exfat and FUSE.
I don't remember which flag removes these filesystems, there was some workaround. Cyril, Li, Jan, do you remember?

That's the:

.dev_fs_flags = TST_FS_SKIP_FUSE,

Which should fix the failures here. Moreover I do wonder if this is a real bug in the fuse implementation or something that have been left out intentionally.

Signature · 2 lines
Cyril Hrubis
[email protected]
#3 lore raw

PATCH 1/1 utimensat01: Test all available FS and handle FS with no attributes

Hi Cyril,

Quoted 5 lines

Hi!

Quoted 3 lines

Although this fails on NTFS and exfat and FUSE.
I don't remember which flag removes these filesystems, there was some workaround. Cyril, Li, Jan, do you remember?

Quoted 7 lines

That's the:

.dev_fs_flags = TST_FS_SKIP_FUSE,

Which should fix the failures here. Moreover I do wonder if this is a real bug in the fuse implementation or something that have been left out intentionally.

Thanks for info. Also vfat needs to be filtered out (if it's not a bug, which needs to be implemented).
If we decide to filter out it, we'd need one more flag (something like TST_FS_SKIP_MICROSOFT, which would filter out vfat, ntfs and exfat).

Kind regards,
Petr

#4 lore raw

PATCH 1/1 utimensat01: Test all available FS and handle FS with no attributes

Hello,

Quoted 11 lines · Petr Vorel

Hi Cyril,

Quoted 8 lines

Hi!

Quoted 3 lines

Although this fails on NTFS and exfat and FUSE.
I don't remember which flag removes these filesystems, there was some workaround. Cyril, Li, Jan, do you remember?

That's the:

.dev_fs_flags = TST_FS_SKIP_FUSE,

Quoted 7 lines
Quoted 3 lines

Which should fix the failures here. Moreover I do wonder if this is a real bug in the fuse implementation or something that have been left out intentionally.

Thanks for info. Also vfat needs to be filtered out (if it's not a bug, which needs to be implemented).
If we decide to filter out it, we'd need one more flag (something like TST_FS_SKIP_MICROSOFT, which would filter out vfat, ntfs and exfat).

I sent in a patch which just uses ext4 as a temp solution. We should probably specify the filesystems we expect this test to work on and accept failure for others. This seems like a complex issue as it can be different for every FS.

Quoted 3 lines

Kind regards,
Petr

Signature · 2 lines
Thank you,
Richard.