drm/vkms: update todo
Melissa Wen
reviewerPATCH v2 1/1 drm/vkms: update todo
Drop issues already resolved in vkms:
- CRC API Improvements to [1] add igt test to check extreme alpha values and [2] alpha blending;
- [3] prime buffer sharing;
- [4] writeback support;
On the other hand, we also found or thought about other improvements since the last update of this document:
- better support for IGT tests
- improvements to writeback support
- syzbot report
Finally, we reorder items by the assumed complexity.
[1] https://patchwork.freedesktop.org/series/55944/
[2] https://patchwork.freedesktop.org/series/80823/
[3] https://patchwork.freedesktop.org/series/63212/
[4] https://patchwork.freedesktop.org/series/81177/
v2:
- Link to syzbot dashboard
--- Documentation/gpu/vkms.rst | 99 ++++++++++++++++++++------------------ 1 file changed, 53 insertions(+), 46 deletions(-)
Documentation/gpu/vkms.rst +53 -46
@@ -10,36 +10,24 @@ TODO ==== -CRC API Improvements --------------------- - -- Optimize CRC computation ``compute_crc()`` and plane blending ``blend()`` - -- Use the alpha value to blend vaddr_src with vaddr_dst instead of - overwriting it in ``blend()``. - -- Add igt test to check cleared alpha value for XRGB plane format. - -- Add igt test to check extreme alpha values i.e. fully opaque and fully - transparent (intermediate values are affected by hw-specific rounding modes). - -Runtime Configuration ---------------------- - -We want to be able to reconfigure vkms instance without having to reload the -module. Use/Test-cases: - -- Hotplug/hotremove connectors on the fly (to be able to test DP MST handling of - compositors). +If you want to do any of the items listed below, please share your interest +with one of the VKMS maintainers. -- Configure planes/crtcs/connectors (we'd need some code to have more than 1 of - them first). +IGT better support +------------------ -- Change output configuration: Plug/unplug screens, change EDID, allow changing - the refresh rate. +- Investigate: (1) test cases on kms_plane that are failing due to timeout on + capturing CRC; (2) when running kms_flip test cases in sequence, some + successful individual test cases are failing randomly. -The currently proposed solution is to expose vkms configuration through -configfs. All existing module options should be supported through configfs too. +- VKMS already has support for vblanks simulated via hrtimers, which can be + tested with kms_flip test; in some way, we can say that VKMS already mimics + the real hardware vblank. However, we also have virtual hardware that does + not support vblank interrupt and completes page_flip events right away; in + this case, compositor developers may end up creating a busy loop on virtual + hardware. It would be useful to support Virtual Hardware behavior in VKMS + because this can help compositor developers to test their features in + multiple scenarios. Add Plane Features ------------------
@@ -55,34 +43,50 @@ There's lots of plane features we could add support for: - Additional buffer formats, especially YUV formats for video like NV12. Low/high bpp RGB formats would also be interesting. -- Async updates (currently only possible on cursor plane using the legacy cursor - api). +- Async updates (currently only possible on cursor plane using the legacy + cursor api). + +For all of these, we also want to review the igt test coverage and make sure +all relevant igt testcases work on vkms. + +Prime Buffer Sharing +-------------------- -For all of these, we also want to review the igt test coverage and make sure all -relevant igt testcases work on vkms. +- Syzbot report - WARNING in vkms_gem_free_object: + https://syzkaller.appspot.com/bug?extid=e7ad70d406e74d8fc9d0 + +Runtime Configuration +--------------------- + +We want to be able to reconfigure vkms instance without having to reload the +module. Use/Test-cases: + +- Hotplug/hotremove connectors on the fly (to be able to test DP MST handling + of compositors). + +- Configure planes/crtcs/connectors (we'd need some code to have more than 1 of + them first). + +- Change output configuration: Plug/unplug screens, change EDID, allow changing + the refresh rate. + +The currently proposed solution is to expose vkms configuration through +configfs. All existing module options should be supported through configfs +too. Writeback support ----------------- -Currently vkms only computes a CRC for each frame. Once we have additional plane -features, we could write back the entire composited frame, and expose it as: +- The writeback and CRC capture operations share the use of composer_enabled + boolean to ensure vblanks. Probably, when these operations work together, + composer_enabled needs to refcounting the composer state to proper work. -- Writeback connector. This is useful for testing compositors if you don't have - hardware with writeback support. +- Add support for cloned writeback outputs and related test cases using a + cloned output in the IGT kms_writeback. - As a v4l device. This is useful for debugging compositors on special vkms configurations, so that developers see what's really going on. -Prime Buffer Sharing --------------------- - -We already have vgem, which is a gem driver for testing rendering, similar to -how vkms is for testing the modeset side. Adding buffer sharing support to vkms -allows us to test them together, to test synchronization and lots of other -features. Also, this allows compositors to test whether they work correctly on -SoC chips, where the display and rendering is very often split between 2 -drivers. - Output Features ---------------
@@ -93,7 +97,10 @@ Output Features - Add support for link status, so that compositors can validate their runtime fallbacks when e.g. a Display Port link goes bad. -- All the hotplug handling describe under "Runtime Configuration". +CRC API Improvements +-------------------- + +- Optimize CRC computation ``compute_crc()`` and plane blending ``blend()`` Atomic Check using eBPF -----------------------
Signature · 6 lines
2.28.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 55 lines · Melissa Wen
Drop issues already resolved in vkms:
- CRC API Improvements to [1] add igt test to check extreme alpha values and [2] alpha blending;
- [3] prime buffer sharing;
- [4] writeback support;On the other hand, we also found or thought about other improvements since the last update of this document:
- better support for IGT tests
- improvements to writeback support
- syzbot reportFinally, we reorder items by the assumed complexity.
[1] https://patchwork.freedesktop.org/series/55944/
[2] https://patchwork.freedesktop.org/series/80823/
[3] https://patchwork.freedesktop.org/series/63212/
[4] https://patchwork.freedesktop.org/series/81177/v2:
- Link to syzbot dashboardCc Daniel Vetter <[email protected]>Cc Rodrigo Siqueira <[email protected]>Cc Haneen Mohammed <[email protected]>Signed-off-by Melissa Wen <[email protected]>Acked-by Daniel Vetter <[email protected]>--- Documentation/gpu/vkms.rst | 99 ++++++++++++++++++++------------------ 1 file changed, 53 insertions(+), 46 deletions(-)Documentation/gpu/vkms.rst +0
-13@@ -10,36 +10,24 @@ TODO ==== -CRC API Improvements --------------------- - -- Optimize CRC computation ``compute_crc()`` and plane blending ``blend()`` - -- Use the alpha value to blend vaddr_src with vaddr_dst instead of - overwriting it in ``blend()``. - -- Add igt test to check cleared alpha value for XRGB plane format. - -- Add igt test to check extreme alpha values i.e. fully opaque and fully - transparent (intermediate values are affected by hw-specific rounding modes). -
Documentation/gpu/vkms.rst line 14
Quoted 10 lines
Documentation/gpu/vkms.rst +2
-8-Runtime Configuration ---------------------- - -We want to be able to reconfigure vkms instance without having to reload the -module. Use/Test-cases: - -- Hotplug/hotremove connectors on the fly (to be able to test DP MST handling of - compositors). +If you want to do any of the items listed below, please share your interest +with one of the VKMS maintainers.
Hi Melissa,
How about change "one of the VKMS maintainers" to "with VKMS maintainers".
With the above change, everything else LGTM.
Quoted 108 lines
Documentation/gpu/vkms.rst +51
-25-- Configure planes/crtcs/connectors (we'd need some code to have more than 1 of - them first). +IGT better support +------------------ -- Change output configuration: Plug/unplug screens, change EDID, allow changing - the refresh rate. +- Investigate: (1) test cases on kms_plane that are failing due to timeout on + capturing CRC; (2) when running kms_flip test cases in sequence, some + successful individual test cases are failing randomly. -The currently proposed solution is to expose vkms configuration through -configfs. All existing module options should be supported through configfs too. +- VKMS already has support for vblanks simulated via hrtimers, which can be + tested with kms_flip test; in some way, we can say that VKMS already mimics + the real hardware vblank. However, we also have virtual hardware that does + not support vblank interrupt and completes page_flip events right away; in + this case, compositor developers may end up creating a busy loop on virtual + hardware. It would be useful to support Virtual Hardware behavior in VKMS + because this can help compositor developers to test their features in + multiple scenarios. Add Plane Features ------------------@@ -55,34 +43,50 @@ There's lots of plane features we could add support for: - Additional buffer formats, especially YUV formats for video like NV12. Low/high bpp RGB formats would also be interesting. -- Async updates (currently only possible on cursor plane using the legacy cursor - api). +- Async updates (currently only possible on cursor plane using the legacy + cursor api). + +For all of these, we also want to review the igt test coverage and make sure +all relevant igt testcases work on vkms. + +Prime Buffer Sharing +-------------------- -For all of these, we also want to review the igt test coverage and make sure all -relevant igt testcases work on vkms. +- Syzbot report - WARNING in vkms_gem_free_object: + https://syzkaller.appspot.com/bug?extid=e7ad70d406e74d8fc9d0 + +Runtime Configuration +--------------------- + +We want to be able to reconfigure vkms instance without having to reload the +module. Use/Test-cases: + +- Hotplug/hotremove connectors on the fly (to be able to test DP MST handling + of compositors). + +- Configure planes/crtcs/connectors (we'd need some code to have more than 1 of + them first). + +- Change output configuration: Plug/unplug screens, change EDID, allow changing + the refresh rate. + +The currently proposed solution is to expose vkms configuration through +configfs. All existing module options should be supported through configfs +too. Writeback support ----------------- -Currently vkms only computes a CRC for each frame. Once we have additional plane -features, we could write back the entire composited frame, and expose it as: +- The writeback and CRC capture operations share the use of composer_enabled + boolean to ensure vblanks. Probably, when these operations work together, + composer_enabled needs to refcounting the composer state to proper work. -- Writeback connector. This is useful for testing compositors if you don't have - hardware with writeback support. +- Add support for cloned writeback outputs and related test cases using a + cloned output in the IGT kms_writeback. - As a v4l device. This is useful for debugging compositors on special vkms configurations, so that developers see what's really going on. -Prime Buffer Sharing --------------------- - -We already have vgem, which is a gem driver for testing rendering, similar to -how vkms is for testing the modeset side. Adding buffer sharing support to vkms -allows us to test them together, to test synchronization and lots of other -features. Also, this allows compositors to test whether they work correctly on -SoC chips, where the display and rendering is very often split between 2 -drivers. - Output Features ---------------@@ -93,7 +97,10 @@ Output Features - Add support for link status, so that compositors can validate their runtime fallbacks when e.g. a Display Port link goes bad. -- All the hotplug handling describe under "Runtime Configuration". +CRC API Improvements +-------------------- + +- Optimize CRC computation ``compute_crc()`` and plane blending ``blend()`` Atomic Check using eBPF -----------------------Signature · 1 line
2.28.0
Signature · 2 lines
Rodrigo Siqueira https://siqueira.tech
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel