Skip to contentSkip to conversation

dt-bindings:iio:consumer yaml bindings

PATCH In review Jonathan Cameron 3 participants 5 messages Oct 11, 2020 – Oct 12, 2020

Subsystems (3)
lore
Share & tools
lore

Jonathan Cameron

author maintainer
#0 lore raw

cover dt-bindings:iio:consumer yaml bindings

From: Jonathan Cameron <[email protected]>

Hi Rob / All,

I've done this as a small independent series as it's something new to me and I'm far from sure I did it correctly.

This includes both pulling out the iio consumer binding to a separate yaml file and an example of using it.

Thanks,

Jonathan

Jonathan Cameron (2):
dt-bindings:iio:iio-consumer add yaml binding for IIO consumers dt-bindings:iio:dac:dpot-dac: yaml conversion.

 .../devicetree/bindings/iio/dac/dpot-dac.txt  | 41 ------------
 .../devicetree/bindings/iio/dac/dpot-dac.yaml | 67 +++++++++++++++++++
 .../devicetree/bindings/iio/iio-bindings.txt  | 53 ---------------
 .../devicetree/bindings/iio/iio-consumer.yaml | 59 ++++++++++++++++
 4 files changed, 126 insertions(+), 94 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/iio/dac/dpot-dac.txt
 create mode 100644 Documentation/devicetree/bindings/iio/dac/dpot-dac.yaml
 create mode 100644 Documentation/devicetree/bindings/iio/iio-consumer.yaml
Signature · 1 line
2.28.0
author maintainer
#1 lore raw

PATCH 1/2 dt-bindings:iio:iio-consumer add yaml binding for IIO consumers

From: Jonathan Cameron <[email protected]>

This can be used via $ref by bindings that are consumers of the channels provided by IIO devices.

---
 .../devicetree/bindings/iio/iio-bindings.txt  | 53 -----------------
 .../devicetree/bindings/iio/iio-consumer.yaml | 59 +++++++++++++++++++
 2 files changed, 59 insertions(+), 53 deletions(-)
Documentation/devicetree/bindings/iio/iio-bindings.txt +0 -53
index aa63cac7323e..cfaed2b54fa9 100644
@@ -47,56 +47,3 @@ Example for a configuration with trigger:
 		};
 	};
 
-==IIO consumers==
-
-Required properties:
-io-channels:	List of phandle and IIO specifier pairs, one pair
-		for each IIO input to the device. Note: if the
-		IIO provider specifies '0' for #io-channel-cells,
-		then only the phandle portion of the pair will appear.
-
-Optional properties:
-io-channel-names:
-		List of IIO input name strings sorted in the same
-		order as the io-channels property. Consumers drivers
-		will use io-channel-names to match IIO input names
-		with IIO specifiers.
-io-channel-ranges:
-		Empty property indicating that child nodes can inherit named
-		IIO channels from this node. Useful for bus nodes to provide
-		and IIO channel to their children.
-
-For example:
-
-	device {
-		io-channels = <&adc 1>, <&ref 0>;
-		io-channel-names = "vcc", "vdd";
-	};
-
-This represents a device with two IIO inputs, named "vcc" and "vdd".
-The vcc channel is connected to output 1 of the &adc device, and the
-vdd channel is connected to output 0 of the &ref device.
-
-==Example==
-
-	adc: max1139@35 {
-		compatible = "maxim,max1139";
-		reg = <0x35>;
-		#io-channel-cells = <1>;
-	};
-
-	...
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>,
-			<&adc 3>, <&adc 4>, <&adc 5>,
-			<&adc 6>, <&adc 7>, <&adc 8>,
-			<&adc 9>;
-	};
-
-	some_consumer {
-		compatible = "some-consumer";
-		io-channels = <&adc 10>, <&adc 11>;
-		io-channel-names = "adc1", "adc2";
-	};
Documentation/devicetree/bindings/iio/iio-consumer.yaml new file +59 -0

60 lines not on this page · raw message

Signature · 1 line
2.28.0
author maintainer
#3 lore raw

PATCH 2/2 dt-bindings:iio:dac:dpot-dac: yaml conversion.

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Txt to yaml format conversion. I dropped the example section describind the measurement ADC, as that isn't strictly part of this binding. Uses a reference to the new iio-consumers.yaml binding.

---
 .../devicetree/bindings/iio/dac/dpot-dac.txt  | 41 ------------
 .../devicetree/bindings/iio/dac/dpot-dac.yaml | 67 +++++++++++++++++++
 2 files changed, 67 insertions(+), 41 deletions(-)
Documentation/devicetree/bindings/iio/dac/dpot-dac.txt deleted +0 -41
deleted file mode 100644
index fdf47a01bfef..000000000000
@@ -1,41 +0,0 @@
-Bindings for DAC emulation using a digital potentiometer
-
-It is assumed that the dpot is used as a voltage divider between the
-current dpot wiper setting and the maximum resistance of the dpot. The
-divided voltage is provided by a vref regulator.
-
-                  .------.
-   .-----------.  |      |
-   | vref      |--'    .---.
-   | regulator |--.    |   |
-   '-----------'  |    | d |
-                  |    | p |
-                  |    | o |  wiper
-                  |    | t |<---------+
-                  |    |   |
-                  |    '---'       dac output voltage
-                  |      |
-                  '------+------------+
-
-Required properties:
-- compatible: Should be "dpot-dac"
-- vref-supply: The regulator supplying the voltage divider.
-- io-channels: Channel node of the dpot to be used for the voltage division.
-- io-channel-names: Should be "dpot".
-
-Example:
-
-	&i2c {
-		dpot: mcp4651-503@28 {
-			compatible = "microchip,mcp4651-503";
-			reg = <0x28>;
-			#io-channel-cells = <1>;
-		};
-	};
-
-	dac {
-		compatible = "dpot-dac";
-		vref-supply = <&reg_3v3>;
-		io-channels = <&dpot 0>;
-		io-channel-names = "dpot";
-	};
Documentation/devicetree/bindings/iio/dac/dpot-dac.yaml new file +67 -0

67 lines not on this page · raw message

Signature · 1 line
2.28.0
Acked-by on v1 2/2
#4 lore raw

Re: [PATCH 2/2] dt-bindings:iio:dac:dpot-dac: yaml conversion.

Hi!

Quoted 9 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Txt to yaml format conversion. I dropped the example section describind the measurement ADC, as that isn't strictly part of this binding. Uses a reference to the new iio-consumers.yaml binding.

While not being competent at checking the yaml thingies, I can at least ack the zap of the irrelevant part of the example and generally support the conversion to a more strict representation.

Quoted 58 lines
---
 .../devicetree/bindings/iio/dac/dpot-dac.txt  | 41 ------------
 .../devicetree/bindings/iio/dac/dpot-dac.yaml | 67 +++++++++++++++++++
 2 files changed, 67 insertions(+), 41 deletions(-)
Documentation/devicetree/bindings/iio/dac/dpot-dac.txt deleted +0 -41
deleted file mode 100644
index fdf47a01bfef..000000000000
@@ -1,41 +0,0 @@
-Bindings for DAC emulation using a digital potentiometer
-
-It is assumed that the dpot is used as a voltage divider between the
-current dpot wiper setting and the maximum resistance of the dpot. The
-divided voltage is provided by a vref regulator.
-
-                  .------.
-   .-----------.  |      |
-   | vref      |--'    .---.
-   | regulator |--.    |   |
-   '-----------'  |    | d |
-                  |    | p |
-                  |    | o |  wiper
-                  |    | t |<---------+
-                  |    |   |
-                  |    '---'       dac output voltage
-                  |      |
-                  '------+------------+
-
-Required properties:
-- compatible: Should be "dpot-dac"
-- vref-supply: The regulator supplying the voltage divider.
-- io-channels: Channel node of the dpot to be used for the voltage division.
-- io-channel-names: Should be "dpot".
-
-Example:
-
-	&i2c {
-		dpot: mcp4651-503@28 {
-			compatible = "microchip,mcp4651-503";
-			reg = <0x28>;
-			#io-channel-cells = <1>;
-		};
-	};
-
-	dac {
-		compatible = "dpot-dac";
-		vref-supply = <&reg_3v3>;
-		io-channels = <&dpot 0>;
-		io-channel-names = "dpot";
-	};
Documentation/devicetree/bindings/iio/dac/dpot-dac.yaml new file +0 -0
new file mode 100644
index 000000000000..b4a8073a3a3c

Documentation/devicetree/bindings/iio/dac/dpot-dac.yaml line 10

Quoted 10 lines
Documentation/devicetree/bindings/iio/dac/dpot-dac.yaml new file +10 -0
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/dpot-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DAC emulation using a digital potentiometer
+
+maintainers:
+  - Peter Rosin <[email protected]>

Heh, I don't know the first thing about yaml so I will probably need help with that. I still want to know about changes though.

Cheers,
Peter

*snip*

#2 lore raw

Re: [PATCH 1/2] dt-bindings:iio:iio-consumer add yaml binding for IIO consumers

In reply to Jonathan Cameron
Quoted 5 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This can be used via $ref by bindings that are consumers of the channels provided by IIO devices.

For consumers like this, I'd suggest instead doing 'select: true' and no $ref. The reason being is we always need additional constraints in the user bindings, and the 'select' means the properties are always at least type checked.

I'd also prefer if we move this to the dtschema repo.

Otherwise, looks fine.

Quoted 136 lines
---
 .../devicetree/bindings/iio/iio-bindings.txt  | 53 -----------------
 .../devicetree/bindings/iio/iio-consumer.yaml | 59 +++++++++++++++++++
 2 files changed, 59 insertions(+), 53 deletions(-)
Documentation/devicetree/bindings/iio/iio-bindings.txt +0 -53
index aa63cac7323e..cfaed2b54fa9 100644
@@ -47,56 +47,3 @@ Example for a configuration with trigger:
                };
        };
 
-==IIO consumers==
-
-Required properties:
-io-channels:   List of phandle and IIO specifier pairs, one pair
-               for each IIO input to the device. Note: if the
-               IIO provider specifies '0' for #io-channel-cells,
-               then only the phandle portion of the pair will appear.
-
-Optional properties:
-io-channel-names:
-               List of IIO input name strings sorted in the same
-               order as the io-channels property. Consumers drivers
-               will use io-channel-names to match IIO input names
-               with IIO specifiers.
-io-channel-ranges:
-               Empty property indicating that child nodes can inherit named
-               IIO channels from this node. Useful for bus nodes to provide
-               and IIO channel to their children.
-
-For example:
-
-       device {
-               io-channels = <&adc 1>, <&ref 0>;
-               io-channel-names = "vcc", "vdd";
-       };
-
-This represents a device with two IIO inputs, named "vcc" and "vdd".
-The vcc channel is connected to output 1 of the &adc device, and the
-vdd channel is connected to output 0 of the &ref device.
-
-==Example==
-
-       adc: max1139@35 {
-               compatible = "maxim,max1139";
-               reg = <0x35>;
-               #io-channel-cells = <1>;
-       };
-
-       ...
-
-       iio-hwmon {
-               compatible = "iio-hwmon";
-               io-channels = <&adc 0>, <&adc 1>, <&adc 2>,
-                       <&adc 3>, <&adc 4>, <&adc 5>,
-                       <&adc 6>, <&adc 7>, <&adc 8>,
-                       <&adc 9>;
-       };
-
-       some_consumer {
-               compatible = "some-consumer";
-               io-channels = <&adc 10>, <&adc 11>;
-               io-channel-names = "adc1", "adc2";
-       };
Documentation/devicetree/bindings/iio/iio-consumer.yaml new file +59 -1
new file mode 100644
index 000000000000..5f28cc29edce
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/iio-consumer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic IIO consumer-bindings
+
+maintainers:
+  - Jonathan Cameron <[email protected]>
+
+description:
+  This binding describes generic properties a consumer of the channels
+  provided by an IIO device may use.
+
+  As well, direct readings of channels on an IIO Device, an IIO device
+  can provide services to consumer devices. Thes are in the form of
+  channel readings and properties.  For example, an ADC might provide
+  3 channels to an analog accelerometer so that an accelerometer
+  driver can use them to read the voltages that correspond to the
+  accelerations on the 3 axis and apply appropriate calibration to
+  provide useful outputs.
+
+properties:
+  io-channels:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: >
+      List of phandle and IIO specifier pairs, one pair
+      for each IIO input to the device. Note: if the
+      IIO provider specifies '0' for #io-channel-cells,
+      then only the phandle portion of the pair will appear.
+
+  io-channel-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: >
+      List of names associated with a given IIO channel by the consumer
+      device.  An example for an analog accelerometer would be "accel_x".
+      Consumers drivers will use io-channel-names to locate the correct
+      phandle based reference in io-channels.
+
+  io-channel-ranges:
+    type: boolean
+    description: >
+      Empty property indicating that child nodes can inherit named
+      IIO channels from this node. Useful for bus nodes to provide
+      and IIO channel to their children.
+
+additionalProperties: true
+
+examples:
+ - |
+   iio-hwmon {
+       compatible = "iio-hwmon";
+       io-channels = <&adc 0>, <&adc 1>, <&adc 2>,
+                     <&adc 3>, <&adc 4>, <&adc 5>,
+                     <&adc 6>, <&adc 7>, <&adc 8>,
+                     <&adc 9>;
+   };
+...
\ No newline at end of file
--

2.28.0