Enable eQEP counter driver on BeagleBone Blue
Subsystems (3)
cover Enable eQEP counter driver on BeagleBone Blue
This series adds device tree nodes for the eQEP portion of the PWMSS on AM33xx and enables it on BeagleBone Blue.
I actually submitted these a year ago, but it looks like these patches never got applied with the actual eQEP driver when it was merged.
For reference, there was some previous discussion about the clocks in "ARM: dts:
am33xx: Add nodes for eQEP". [1]
[1]: https://lore.kernel.org/linux-omap/[email protected]/
I have also included a new patch to enable the eQEP driver in the defconfig.
David Lechner (3):
ARM: dts: am33xx: Add nodes for eQEP
ARM: dts: am335x-boneblue: Enable eQEP
ARM: omap2plus_defconfig: Enable TI eQEP counter driver
arch/arm/boot/dts/am335x-boneblue.dts | 54 +++++++++++++++++++++++++++ arch/arm/boot/dts/am33xx-l4.dtsi | 27 ++++++++++++++ arch/arm/configs/omap2plus_defconfig | 2 + 3 files changed, 83 insertions(+)
Signature · 1 line
2.25.1
PATCH 1/3 ARM: dts: am33xx: Add nodes for eQEP
This adds new nodes for the Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP) module in the PWM subsystem on AM33XX.
--- arch/arm/boot/dts/am33xx-l4.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
arch/arm/boot/dts/am33xx-l4.dtsi +27 -0
@@ -1924,6 +1924,15 @@ ecap0: ecap@100 { status = "disabled"; }; + eqep0: counter@180 { + compatible = "ti,am3352-eqep"; + reg = <0x180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "sysclkout"; + interrupts = <79>; + status = "disabled"; + }; + ehrpwm0: pwm@200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
@@ -1976,6 +1985,15 @@ ecap1: ecap@100 { status = "disabled"; }; + eqep1: counter@180 { + compatible = "ti,am3352-eqep"; + reg = <0x180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "sysclkout"; + interrupts = <88>; + status = "disabled"; + }; + ehrpwm1: pwm@200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
@@ -2028,6 +2046,15 @@ ecap2: ecap@100 { status = "disabled"; }; + eqep2: counter@180 { + compatible = "ti,am3352-eqep"; + reg = <0x180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "sysclkout"; + interrupts = <89>; + status = "disabled"; + }; + ehrpwm2: pwm@200 { compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
Signature · 1 line
2.25.1
PATCH 3/3 ARM: omap2plus_defconfig: Enable TI eQEP counter driver
In reply to David LechnerThis enables the TI eQEP counter driver that is used by BeagleBone Blue.
--- arch/arm/configs/omap2plus_defconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/configs/omap2plus_defconfig +2 -0
@@ -524,6 +524,8 @@ CONFIG_PHY_DM816X_USB=m CONFIG_OMAP_USB2=m CONFIG_TI_PIPE3=y CONFIG_TWL4030_USB=m +CONFIG_COUNTER=m +CONFIG_TI_EQEP=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS_SECURITY=y
Signature · 1 line
2.25.1
PATCH 2/3 ARM: dts: am335x-boneblue: Enable eQEP
In reply to David LechnerThis enables the Enhanced Quadrature Encoder Pulse (eQEP) module for connectors E1, E2 and E3 on BeagleBone Blue.
--- arch/arm/boot/dts/am335x-boneblue.dts | 54 +++++++++++++++++++++++++++ 1 file changed, 54 insertions(+)
arch/arm/boot/dts/am335x-boneblue.dts +54 -0
@@ -241,6 +241,30 @@ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* (E18) uart0_cts AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ >; }; + + /* E1 */ + eqep0_pins: pinmux_eqep0_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT, MUX_MODE1) /* (B12) mcasp0_aclkr.eQEP0A_in */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT, MUX_MODE1) /* (C13) mcasp0_fsr.eQEP0B_in */ + >; + }; + + /* E2 */ + eqep1_pins: pinmux_eqep1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT, MUX_MODE2) /* (V2) lcd_data12.eQEP1A_in */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_INPUT, MUX_MODE2) /* (V3) lcd_data13.eQEP1B_in */ + >; + }; + + /* E3 */ + eqep2_pins: pinmux_eqep2_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE4) /* (T12) gpmc_ad12.eQEP2A_in */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE4) /* (R12) gpmc_ad13.eQEP2B_in */ + >; + }; }; &uart0 {
@@ -419,3 +443,33 @@ ls_buf_en { line-name = "LS_BUF_EN"; }; }; + +&epwmss0 { + status = "okay"; +}; + +&eqep0 { + pinctrl-names = "default"; + pinctrl-0 = <&eqep0_pins>; + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&eqep1 { + pinctrl-names = "default"; + pinctrl-0 = <&eqep1_pins>; + status = "okay"; +}; + +&epwmss2 { + status = "okay"; +}; + +&eqep2 { + pinctrl-names = "default"; + pinctrl-0 = <&eqep2_pins>; + status = "okay"; +};
Signature · 1 line
2.25.1
Tony Lindgren
maintainerQuoted 5 lines · David Lechner
This series adds device tree nodes for the eQEP portion of the PWMSS on AM33xx and enables it on BeagleBone Blue.
I actually submitted these a year ago, but it looks like these patches never got applied with the actual eQEP driver when it was merged.
Sorry if I dropped these earlier, I guess I though you're reposting the series and untagged them.
Quoted 6 lines
For reference, there was some previous discussion about the clocks in "ARM: dts:
am33xx: Add nodes for eQEP". [1][1]: https://lore.kernel.org/linux-omap/[email protected]/
I have also included a new patch to enable the eQEP driver in the defconfig.
Great, thanks applying these into omap-for-v5.11/dt and defconfig branches.
Regards,
Tony
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 9 lines · Tony Lindgren
Quoted 5 lines · David Lechner
This series adds device tree nodes for the eQEP portion of the PWMSS on AM33xx and enables it on BeagleBone Blue.
I actually submitted these a year ago, but it looks like these patches never got applied with the actual eQEP driver when it was merged.
Sorry if I dropped these earlier, I guess I though you're reposting the series and untagged them.
No worries, I forgot about them too. :-)
Quoted 14 lines
Quoted 7 lines
For reference, there was some previous discussion about the clocks in "ARM: dts:
am33xx: Add nodes for eQEP". [1][1]: https://lore.kernel.org/linux-omap/[email protected]/
I have also included a new patch to enable the eQEP driver in the defconfig.
Great, thanks applying these into omap-for-v5.11/dt and defconfig branches.
Regards,
Tony