Skip to contentSkip to conversation

brcmfmac: fix SDIO access for big-endian host

PATCH In review Remi Depommier 2 participants 4 messages Oct 20, 2020 – Nov 24, 2020 Broadcom BRCM80211 IEEE802.11 wireless drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 brcmfmac: fix SDIO access for big-endian host

These full-mac chips use little-endian byte ordering. This patch adds a few missing conversions to/from little-endian so that the driver may be used with a big-endian host.

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +4 -4
index 3c07d1bbe1c6..307f1d70224d 100644
@@ -1340,7 +1340,7 @@ static void brcmf_sdio_free_glom(struct brcmf_sdio *bus)
 static inline u8 brcmf_sdio_getdatoffset(u8 *swheader)
 {
 	u32 hdrvalue;
-	hdrvalue = *(u32 *)swheader;
+	hdrvalue = le32_to_cpu(*(__le32 *)swheader);
 	return (u8)((hdrvalue & SDPCM_DOFFSET_MASK) >> SDPCM_DOFFSET_SHIFT);
 }
 
@@ -1349,7 +1349,7 @@ static inline bool brcmf_sdio_fromevntchan(u8 *swheader)
 	u32 hdrvalue;
 	u8 ret;
 
-	hdrvalue = *(u32 *)swheader;
+	hdrvalue = le32_to_cpu(*(__le32 *)swheader);
 	ret = (u8)((hdrvalue & SDPCM_CHANNEL_MASK) >> SDPCM_CHANNEL_SHIFT);
 
 	return (ret == SDPCM_EVENT_CHANNEL);
@@ -3544,7 +3544,7 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
 		/* otherwise, set txglomalign */
 		value = sdiodev->settings->bus.sdio.sd_sgentry_align;
 		/* SDIO ADMA requires at least 32 bit alignment */
-		value = max_t(u32, value, ALIGNMENT);
+		value = cpu_to_le32(max_t(u32, value, ALIGNMENT));
 		err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value,
 					   sizeof(u32));
 	}
@@ -3555,7 +3555,7 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
 	bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN;
 	if (sdiodev->sg_support) {
 		bus->txglom = false;
-		value = 1;
+		value = cpu_to_le32(1);
 		err = brcmf_iovar_data_set(bus->sdiodev->dev, "bus:rxglom",
 					   &value, sizeof(u32));
 		if (err < 0) {
Signature · 1 line
2.17.1
#1 lore raw
Quoted 5 lines · Remi Depommier

These full-mac chips use little-endian byte ordering. This patch adds a few missing conversions to/from little-endian so that the driver may be used with a big-endian host.

Patch applied to wireless-drivers-next.git, thanks.

d56fd83cf99c brcmfmac: fix SDIO access for big-endian host

Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
#2 lore raw

PATCH 1/1 brcmfmac: Fix incorrect type in assignment

In reply to Remi Depommier

The left-hand side of the assignment from cpu_to_le32() should be of type __le32. This commit clears the warning reported by sparse when building with C=1 CF="-D__CHECK_ENDIAN__".

Fixes d56fd83cf99c ("brcmfmac: fix SDIO access for big-endian host")
---
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +9 -8
index f58a96fa4eb5..805e8d121d00 100644
@@ -3517,6 +3517,7 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
 	struct brcmf_sdio *bus = sdiodev->bus;
 	struct brcmf_core *core = bus->sdio_core;
 	u32 value;
+	__le32 iovar;
 	int err;
 
 	/* maxctl provided by common layer */
@@ -3537,16 +3538,16 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
 	 */
 	if (core->rev < 12) {
 		/* for sdio core rev < 12, disable txgloming */
-		value = 0;
-		err = brcmf_iovar_data_set(dev, "bus:txglom", &value,
-					   sizeof(u32));
+		iovar = 0;
+		err = brcmf_iovar_data_set(dev, "bus:txglom", &iovar,
+					   sizeof(iovar));
 	} else {
 		/* otherwise, set txglomalign */
 		value = sdiodev->settings->bus.sdio.sd_sgentry_align;
 		/* SDIO ADMA requires at least 32 bit alignment */
-		value = cpu_to_le32(max_t(u32, value, ALIGNMENT));
-		err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value,
-					   sizeof(u32));
+		iovar = cpu_to_le32(max_t(u32, value, ALIGNMENT));
+		err = brcmf_iovar_data_set(dev, "bus:txglomalign", &iovar,
+					   sizeof(iovar));
 	}
 
 	if (err < 0)
@@ -3555,9 +3556,9 @@ static int brcmf_sdio_bus_preinit(struct device *dev)
 	bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN;
 	if (sdiodev->sg_support) {
 		bus->txglom = false;
-		value = cpu_to_le32(1);
+		iovar = cpu_to_le32(1);
 		err = brcmf_iovar_data_set(bus->sdiodev->dev, "bus:rxglom",
-					   &value, sizeof(u32));
+					   &iovar, sizeof(iovar));
 		if (err < 0) {
 			/* bus:rxglom is allowed to fail */
 			err = 0;
Signature · 1 line
2.17.1
#3 lore raw

Re: [PATCH] brcmfmac: Fix incorrect type in assignment

Quoted 7 lines · Remi Depommier

The left-hand side of the assignment from cpu_to_le32() should be of type __le32. This commit clears the warning reported by sparse when building with C=1 CF="-D__CHECK_ENDIAN__".

Fixes d56fd83cf99c ("brcmfmac: fix SDIO access for big-endian host")

Patch applied to wireless-drivers-next.git, thanks.

fa3622bbea10 brcmfmac: Fix incorrect type in assignment

Signature · 3 lines
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches