riscv: Set text_offset correctly for M-Mode
PATCH v2 1/1 riscv: Set text_offset correctly for M-Mode
M-Mode Linux is loaded at the start of RAM, not 2MB later. Perhaps this should be calculated based on PAGE_OFFSET somehow? Even better would be to deprecate text_offset and instead introduce something absolute.
---
Changes in v2:
- RISCV_S_MODE does not exist; use RISCV_M_MODE instead
arch/riscv/kernel/head.S | 5 +++++ 1 file changed, 5 insertions(+)
arch/riscv/kernel/head.S +5 -0
@@ -27,12 +27,17 @@ ENTRY(_start) /* reserved */ .word 0 .balign 8 +#ifdef CONFIG_RISCV_M_MODE + /* Image load offset (0MB) from start of RAM for M-mode */ + .dword 0 +#else #if __riscv_xlen == 64 /* Image load offset(2MB) from start of RAM */ .dword 0x200000 #else /* Image load offset(4MB) from start of RAM */ .dword 0x400000 #endif +#endif /* Effective size of kernel image */ .dword _end - _start
Signature · 7 lines
2.28.0 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Quoted 26 lines · Sean Anderson
M-Mode Linux is loaded at the start of RAM, not 2MB later. Perhaps this should be calculated based on
PAGE_OFFSETsomehow? Even better would be to deprecatetext_offsetand instead introduce something absolute.Signed-off-by Sean Anderson <[email protected]>---
Changes in v2:
-RISCV_S_MODEdoes not exist; useRISCV_M_MODEinsteadarch/riscv/kernel/head.S | 5 +++++ 1 file changed, 5 insertions(+)arch/riscv/kernel/head.S +4
-0@@ -27,12 +27,17 @@ ENTRY(_start) /* reserved */ .word 0 .balign 8 +#ifdef CONFIG_RISCV_M_MODE + /* Image load offset (0MB) from start of RAM for M-mode */ + .dword 0 +#else
arch/riscv/kernel/head.S ENTRY(_start) · line 43
Quoted 10 lines
arch/riscv/kernel/head.S +1
-0#if __riscv_xlen == 64 /* Image load offset(2MB) from start of RAM */ .dword 0x200000 #else /* Image load offset(4MB) from start of RAM */ .dword 0x400000 #endif +#endif /* Effective size of kernel image */ .dword _end - _start
Looks good to me. Added this to my upcoming pile of patches for Kendryte and tested. No problems.
Signature · 7 lines
Damien Le Moal Western Digital Research _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Palmer Dabbelt
maintainerQuoted 41 lines · Damien Le Moal
Quoted 27 lines · Sean Anderson
M-Mode Linux is loaded at the start of RAM, not 2MB later. Perhaps this should be calculated based on
PAGE_OFFSETsomehow? Even better would be to deprecatetext_offsetand instead introduce something absolute.Signed-off-by Sean Anderson <[email protected]>---
Changes in v2:
-RISCV_S_MODEdoes not exist; useRISCV_M_MODEinsteadarch/riscv/kernel/head.S | 5 +++++ 1 file changed, 5 insertions(+)arch/riscv/kernel/head.S +4
-0@@ -27,12 +27,17 @@ ENTRY(_start) /* reserved */ .word 0 .balign 8 +#ifdef CONFIG_RISCV_M_MODE + /* Image load offset (0MB) from start of RAM for M-mode */ + .dword 0 +#elsearch/riscv/kernel/head.S ENTRY(_start) · line 43
Quoted 10 lines
arch/riscv/kernel/head.S +1
-0#if __riscv_xlen == 64 /* Image load offset(2MB) from start of RAM */ .dword 0x200000 #else /* Image load offset(4MB) from start of RAM */ .dword 0x400000 #endif +#endif /* Effective size of kernel image */ .dword _end - _startLooks good to me. Added this to my upcoming pile of patches for Kendryte and tested. No problems.
Quoted 2 lines
Reviewed-by Damien Le Moal <[email protected]>Tested-by Damien Le Moal <[email protected]>
Thanks. This is on fixes.
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv