ARM: dts: sun8i: add FriendlyArm ZeroPi support
Subsystems (3)
PATCH 1/1 ARM: dts: sun8i: add FriendlyArm ZeroPi support
The ZeroPi is another fun board developed
by FriendlyELEC for makers,
hobbyists and fans.
ZeroPi key features
- Allwinner H3, Quad-core [email protected]
- 256MB/512MB DDR3 RAM
- microsd slot
- 10/100/1000Mbps Ethernet
- Debug Serial Port
- DC 5V/2A power-supply
--- .../devicetree/bindings/arm/sunxi.yaml | 5 ++ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-h3-zeropi.dts | 69 +++++++++++++++++++ 3 files changed, 75 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-h3-zeropi.dts
Documentation/devicetree/bindings/arm/sunxi.yaml +5 -0
@@ -246,6 +246,11 @@ properties: - const: friendlyarm,nanopi-neo-plus2 - const: allwinner,sun50i-h5 + - description: FriendlyARM ZeroPi + items: + - const: friendlyarm,zeropi + - const: allwinner,sun50i-h3 + - description: Gemei G9 Tablet items: - const: gemei,g9
arch/arm/boot/dts/Makefile +1 -0
@@ -1187,6 +1187,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-plus2e.dtb \ sun8i-h3-orangepi-zero-plus2.dtb \ sun8i-h3-rervision-dvk.dtb \ + sun8i-h3-zeropi.dtb \ sun8i-h3-emlid-neutis-n5h3-devboard.dtb \ sun8i-r16-bananapi-m2m.dtb \ sun8i-r16-nintendo-nes-classic.dtb \
arch/arm/boot/dts/sun8i-h3-zeropi.dts new file +69 -0
69 lines not on this page · raw message
Signature · 1 line
2.29.0
Hi,
Thanks for your patch
Quoted 86 lines · Yu-Tung Chang
The ZeroPi is another fun board developed
by FriendlyELEC for makers,
hobbyists and fans.ZeroPi key features
- Allwinner H3, Quad-core [email protected]
- 256MB/512MB DDR3 RAM
- microsd slot
- 10/100/1000Mbps Ethernet
- Debug Serial Port
- DC 5V/2A power-supplySigned-off-by Yu-Tung Chang <[email protected]>--- .../devicetree/bindings/arm/sunxi.yaml | 5 ++ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-h3-zeropi.dts | 69 +++++++++++++++++++ 3 files changed, 75 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-h3-zeropi.dtsDocumentation/devicetree/bindings/arm/sunxi.yaml +5
-0@@ -246,6 +246,11 @@ properties: - const: friendlyarm,nanopi-neo-plus2 - const: allwinner,sun50i-h5 + - description: FriendlyARM ZeroPi + items: + - const: friendlyarm,zeropi + - const: allwinner,sun50i-h3 + - description: Gemei G9 Tablet items: - const: gemei,g9arch/arm/boot/dts/Makefile +1
-0@@ -1187,6 +1187,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-h3-orangepi-plus2e.dtb \ sun8i-h3-orangepi-zero-plus2.dtb \ sun8i-h3-rervision-dvk.dtb \ + sun8i-h3-zeropi.dtb \ sun8i-h3-emlid-neutis-n5h3-devboard.dtb \ sun8i-r16-bananapi-m2m.dtb \ sun8i-r16-nintendo-nes-classic.dtb \arch/arm/boot/dts/sun8i-h3-zeropi.dts new file +32
-0@@ -0,0 +1,69 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2020 Yu-Tung Chang <[email protected]> + */ + +#include "sun8i-h3-nanopi.dtsi" + +/ { + model = "FriendlyARM ZeroPi"; + compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3"; + + aliases { + ethernet0 = &emac; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_nanopi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&ehci0 { + status = "okay"; +}; +
arch/arm/boot/dts/sun8i-h3-zeropi.dts line 42
Quoted 10 lines
arch/arm/boot/dts/sun8i-h3-zeropi.dts new file +10
-0+&ohci0 { + status = "okay"; +}; + +&pio { + gmac_power_pin_nanopi: gmac_power_pin@0 { + pins = "PD6"; + function = "gpio_out"; + }; +};
You don't need that node, it's going to be done automatically with the GPIO you defined earlier.
arch/arm/boot/dts/sun8i-h3-zeropi.dts line 47
Quoted 4 lines
arch/arm/boot/dts/sun8i-h3-zeropi.dts new file +4
-0+&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>;
That address doesn't match the unit-adress in the DT node name.
arch/arm/boot/dts/sun8i-h3-zeropi.dts line 56
Quoted 9 lines
arch/arm/boot/dts/sun8i-h3-zeropi.dts new file +9
-0+ }; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii";
Have you tested the network with the 5.9 kernel? There's been a lot of DT broken due to a change in the PHY setup.
Maxime