Skip to contentSkip to conversation

Extra patches with NDR support

PATCH Applied Leon Romanovsky 2 participants 4 messages Oct 26, 2020 – Nov 2, 2020

Subsystems (2)
lore
Share & tools
lore
#1 lore raw

PATCH 1/2 IB/core: Add support for NDR link speed

From: Meir Lichtinger <[email protected]>

Add new IBTA speed NDR, supporting signaling rate of 100Gb.

---
 drivers/infiniband/core/sysfs.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/infiniband/core/sysfs.c +4 -0
index 914cddea525d..2f032e79f36f 100644
@@ -273,6 +273,10 @@ static ssize_t rate_show(struct ib_port *p, struct port_attribute *unused,
 		speed = " HDR";
 		rate = 500;
 		break;
+	case IB_SPEED_NDR:
+		speed = " NDR";
+		rate = 1000;
+		break;
 	case IB_SPEED_SDR:
 	default:		/* default to SDR for invalid rates */
 		speed = " SDR";
Signature · 1 line
2.26.2
#2 lore raw

PATCH 2/2 IB/mlx5: Add support for NDR link speed

In reply to Leon Romanovsky

From: Meir Lichtinger <[email protected]>

The IBTA specification has new speed - NDR. That speed supports signaling rate of 100Gb. mlx5 IB driver translates link modes reported by ConnectX device to IB speed and width. Added translation of new 100Gb, 200Gb and 400Gb link modes to NDR IB type and width of x1, x2 or x4 respectively.

---
 drivers/infiniband/hw/mlx5/main.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/infiniband/hw/mlx5/main.c +12 -0
index bcee10c9d9a8..2dbd879bf841 100644
@@ -419,10 +419,22 @@ static int translate_eth_ext_proto_oper(u32 eth_proto_oper, u16 *active_speed,
 		*active_width = IB_WIDTH_2X;
 		*active_speed = IB_SPEED_HDR;
 		break;
+	case MLX5E_PROT_MASK(MLX5E_100GAUI_1_100GBASE_CR_KR):
+		*active_width = IB_WIDTH_1X;
+		*active_speed = IB_SPEED_NDR;
+		break;
 	case MLX5E_PROT_MASK(MLX5E_200GAUI_4_200GBASE_CR4_KR4):
 		*active_width = IB_WIDTH_4X;
 		*active_speed = IB_SPEED_HDR;
 		break;
+	case MLX5E_PROT_MASK(MLX5E_200GAUI_2_200GBASE_CR2_KR2):
+		*active_width = IB_WIDTH_2X;
+		*active_speed = IB_SPEED_NDR;
+		break;
+	case MLX5E_PROT_MASK(MLX5E_400GAUI_4_400GBASE_CR4_KR4):
+		*active_width = IB_WIDTH_4X;
+		*active_speed = IB_SPEED_NDR;
+		break;
 	default:
 		return -EINVAL;
 	}
Signature · 1 line
2.26.2