iio: pressure: dps310: Use get_unaligned_beXX()
Subsystems (2)
PATCH 1/1 iio: pressure: dps310: Use get_unaligned_beXX()
This makes the driver code slightly easier to read.
--- drivers/iio/pressure/dps310.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/iio/pressure/dps310.c +9 -9
@@ -127,7 +127,7 @@ static int dps310_get_coefs(struct dps310_data *data) c0 = (coef[0 ] <<4 ) | (coef[1 ] >>4 ); data->c0 =sign_extend32 (c0,11 ); - c1 = ((coef[1 ] &GENMASK (3 ,0 )) <<8 ) | coef[2 ]; + c1 =get_unaligned_be16 (&coef[1 ]) &GENMASK (11 ,0 ); data->c1 =sign_extend32 (c1,11 );/*
@@ -138,22 +138,22 @@ static int dps310_get_coefs(struct dps310_data *data) c00 = (coef[3 ] <<12 ) | (coef[4 ] <<4 ) | (coef[5 ] >>4 ); data->c00 =sign_extend32 (c00,19 ); - c10 = ((coef[5 ] &GENMASK (3 ,0 )) <<16 ) | (coef[6 ] <<8 ) | coef[7 ]; + c10 =get_unaligned_be24 (&coef[5 ]) &GENMASK (19 ,0 ); data->c10 =sign_extend32 (c10,19 ); - c01 = (coef[8 ] <<8 ) | coef[9 ]; + c01 =get_unaligned_be16 (&coef[8 ]); data->c01 =sign_extend32 (c01,15 ); - c11 = (coef[10 ] <<8 ) | coef[11 ]; + c11 =get_unaligned_be16 (&coef[10 ]); data->c11 =sign_extend32 (c11,15 ); - c20 = (coef[12 ] <<8 ) | coef[13 ]; + c20 =get_unaligned_be16 (&coef[12 ]); data->c20 =sign_extend32 (c20,15 ); - c21 = (coef[14 ] <<8 ) | coef[15 ]; + c21 =get_unaligned_be16 (&coef[14 ]); data->c21 =sign_extend32 (c21,15 ); - c30 = (coef[16 ] <<8 ) | coef[17 ]; + c30 =get_unaligned_be16 (&coef[16 ]); data->c30 =sign_extend32 (c30,15 );return 0 ;
@@ -323,7 +323,7 @@ static int dps310_read_pres_raw(struct dps310_data *data)if (rc <0 ) goto done; - raw = (val[0 ] <<16 ) | (val[1 ] <<8 ) | val[2 ]; + raw =get_unaligned_be24 (&val[0 ]); data->pressure_raw =sign_extend32 (raw,23 ); done:
@@ -342,7 +342,7 @@ static int dps310_read_temp_ready(struct dps310_data *data)if (rc <0 )return rc; - raw = (val[0 ] <<16 ) | (val[1 ] <<8 ) | val[2 ]; + raw =get_unaligned_be24 (&val[0 ]); data->temp_raw =sign_extend32 (raw,23 );return 0 ;
Signature · 1 line
2.28.0
Jonathan Cameron
maintainerQuoted 4 lines · On Mon, 26 Oct 2020 20:05:15 +0200 Andy Shevchenko…
This makes the driver code slightly easier to read.
Cc Eddie James <[email protected]>Signed-off-by Andy Shevchenko <[email protected]>
Hi Andy,
I am a bit in 2 minds about this one.
I'm not 100% sure on the register arrangement here, but it 'looks' like a be64 followed by some smaller registers.
It isn't documented like that in the datasheet though, so representing it as such might confuse people...
So, we 'could' use a structure with a __be64 and some __be16s then all would be aligned, but it would be hard to align with the datasheet.
Unfortunately what you have here is also rather hard to align with the datasheet...
Jonathan
Quoted 64 lines
--- drivers/iio/pressure/dps310.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)drivers/iio/pressure/dps310.c +9
-9@@ -127,7 +127,7 @@ static int dps310_get_coefs(struct dps310_data *data) c0 = (coef[0 ] <<4 ) | (coef[1 ] >>4 ); data->c0 =sign_extend32 (c0,11 ); - c1 = ((coef[1 ] &GENMASK (3 ,0 )) <<8 ) | coef[2 ]; + c1 =get_unaligned_be16 (&coef[1 ]) &GENMASK (11 ,0 ); data->c1 =sign_extend32 (c1,11 );/* @@ -138,22 +138,22 @@ static int dps310_get_coefs(struct dps310_data *data) c00 = (coef[3 ] <<12 ) | (coef[4 ] <<4 ) | (coef[5 ] >>4 ); data->c00 =sign_extend32 (c00,19 ); - c10 = ((coef[5 ] &GENMASK (3 ,0 )) <<16 ) | (coef[6 ] <<8 ) | coef[7 ]; + c10 =get_unaligned_be24 (&coef[5 ]) &GENMASK (19 ,0 ); data->c10 =sign_extend32 (c10,19 ); - c01 = (coef[8 ] <<8 ) | coef[9 ]; + c01 =get_unaligned_be16 (&coef[8 ]); data->c01 =sign_extend32 (c01,15 ); - c11 = (coef[10 ] <<8 ) | coef[11 ]; + c11 =get_unaligned_be16 (&coef[10 ]); data->c11 =sign_extend32 (c11,15 ); - c20 = (coef[12 ] <<8 ) | coef[13 ]; + c20 =get_unaligned_be16 (&coef[12 ]); data->c20 =sign_extend32 (c20,15 ); - c21 = (coef[14 ] <<8 ) | coef[15 ]; + c21 =get_unaligned_be16 (&coef[14 ]); data->c21 =sign_extend32 (c21,15 ); - c30 = (coef[16 ] <<8 ) | coef[17 ]; + c30 =get_unaligned_be16 (&coef[16 ]); data->c30 =sign_extend32 (c30,15 );return 0 ;@@ -323,7 +323,7 @@ static int dps310_read_pres_raw(struct dps310_data *data)if (rc <0 ) goto done; - raw = (val[0 ] <<16 ) | (val[1 ] <<8 ) | val[2 ]; + raw =get_unaligned_be24 (&val[0 ]); data->pressure_raw =sign_extend32 (raw,23 ); done:@@ -342,7 +342,7 @@ static int dps310_read_temp_ready(struct dps310_data *data)if (rc <0 )return rc; - raw = (val[0 ] <<16 ) | (val[1 ] <<8 ) | val[2 ]; + raw =get_unaligned_be24 (&val[0 ]); data->temp_raw =sign_extend32 (raw,23 );return 0 ;
Quoted 18 lines · Jonathan Cameron
Quoted 4 lines · On Mon, 26 Oct 2020 20:05:15 +0200 Andy Shevchenko…
This makes the driver code slightly easier to read.
Cc Eddie James <[email protected]>Signed-off-by Andy Shevchenko <[email protected]>Hi Andy,
I am a bit in 2 minds about this one.
I'm not 100% sure on the register arrangement here, but it 'looks' like a be64 followed by some smaller registers.
It isn't documented like that in the datasheet though, so representing it as such might confuse people...
Quoted 5 lines
So, we 'could' use a structure with a
__be64and some__be16sthen all would be aligned, but it would be hard to align with the datasheet.Unfortunately what you have here is also rather hard to align with the datasheet...
Thanks for the review. I just got it right now that the proper one (and for previous similar patch) should be converting to the bitmap API.
Because it seems to me that there are fields from a bigger bitmap area. However, I might be mistaken.
I will drop this from my local branch.
Signature · 2 lines
With Best Regards, Andy Shevchenko