Skip to contentSkip to conversation

mwifiex: disable ps_mode by default for stability

PATCH In review Tsuchiya Yuto 6 participants 19 messages Oct 28, 2020 – Dec 20, 2020

Subsystems (3)
lore
Share & tools
lore
#8 lore raw

PATCH 2/3 mwifiex: add allow_ps_mode module parameter

In reply to Tsuchiya Yuto

To make the ps_mode (power_save) control easier, this commit adds a new module parameter allow_ps_mode and set it false (disallowed) by default.

When this parameter is set to false, changing the power_save mode will be disallowed like the following:

    $ sudo iw dev mlan0 set power_save on
    command failed: Operation not permitted (-1)
---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
drivers/net/wireless/marvell/mwifiex/cfg80211.c +16 -0
index a6b9dc6700b14..943bc1e8ceaee 100644
@@ -25,6 +25,11 @@
 static char *reg_alpha2;
 module_param(reg_alpha2, charp, 0);
 
+static bool allow_ps_mode;
+module_param(allow_ps_mode, bool, 0644);
+MODULE_PARM_DESC(allow_ps_mode,
+		 "allow WiFi power management to be enabled. (default: disallowed)");
+
 static const struct ieee80211_iface_limit mwifiex_ap_sta_limits[] = {
 	{
 		.max = MWIFIEX_MAX_BSS_NUM,
@@ -435,6 +440,17 @@ mwifiex_cfg80211_set_power_mgmt(struct wiphy *wiphy,
 
 	ps_mode = enabled;
 
+	/* Allow ps_mode to be enabled only when allow_ps_mode is true */
+	if (ps_mode && !allow_ps_mode) {
+		mwifiex_dbg(priv->adapter, MSG,
+			    "Enabling ps_mode disallowed by modparam\n");
+
+		/* Return -EPERM to inform userspace tools that setting
+		 * power_save to be enabled is not permitted.
+		 */
+		return -EPERM;
+	}
+
 	return mwifiex_drv_set_power(priv, &ps_mode);
 }
 
Signature · 1 line
2.29.1
maintainer
#9 lore raw

Re: [PATCH 2/3] mwifiex: add allow_ps_mode module parameter

Quoted 3 lines · Tsuchiya Yuto

To make the ps_mode (power_save) control easier, this commit adds a new module parameter allow_ps_mode and set it false (disallowed) by default.

This sounds like a bad idea, as it breaks all the existing users who expect this feature to be allowed. Seems like you should flip the defaults. Without some better justification, NACK.

Also, I can't find the other 2 patches in this alleged series. Maybe they're still making it through the mailing lists and archives.

Brian

Quoted 7 lines

When this parameter is set to false, changing the power_save mode will be disallowed like the following:

    $ sudo iw dev mlan0 set power_save on
    command failed: Operation not permitted (-1)
#15 lore raw

PATCH 3/3 mwifiex: print message when changing ps_mode

In reply to Tsuchiya Yuto

Users may want to know the ps_mode state change (e.g., diagnosing connection issues). This commit adds the print when changing ps_mode.

---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/net/wireless/marvell/mwifiex/cfg80211.c +7 -0
index 943bc1e8ceaee..a2eb8df8d3854 100644
@@ -451,6 +451,13 @@ mwifiex_cfg80211_set_power_mgmt(struct wiphy *wiphy,
 		return -EPERM;
 	}
 
+	if (ps_mode)
+		mwifiex_dbg(priv->adapter, MSG,
+			    "Enabling ps_mode, disable if unstable.\n");
+	else
+		mwifiex_dbg(priv->adapter, MSG,
+			    "Disabling ps_mode.\n");
+
 	return mwifiex_drv_set_power(priv, &ps_mode);
 }
 
Signature · 1 line
2.29.1
#1 lore raw

PATCH 1/3 mwifiex: disable ps_mode explicitly by default instead

In reply to Tsuchiya Yuto

On Microsoft Surface devices (PCIe-88W8897), the ps_mode causes connection unstable, especially with 5GHz APs. Then, it eventually causes fw crash.

This commit disables ps_mode by default instead of enabling it.

Required code is extracted from mwifiex_drv_set_power().

---
 drivers/net/wireless/marvell/mwifiex/sta_cmd.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/net/wireless/marvell/mwifiex/sta_cmd.c +8 -3
index d3a968ef21ef9..9b7b52fbc9c45 100644
@@ -2333,14 +2333,19 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta, bool init)
 			return -1;
 
 		if (priv->bss_type != MWIFIEX_BSS_TYPE_UAP) {
-			/* Enable IEEE PS by default */
-			priv->adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_PSP;
+			/* Disable IEEE PS by default */
+			priv->adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM;
 			ret = mwifiex_send_cmd(priv,
 					       HostCmd_CMD_802_11_PS_MODE_ENH,
-					       EN_AUTO_PS, BITMAP_STA_PS, NULL,
+					       DIS_AUTO_PS, BITMAP_STA_PS, NULL,
 					       true);
 			if (ret)
 				return -1;
+			ret = mwifiex_send_cmd(priv,
+					       HostCmd_CMD_802_11_PS_MODE_ENH,
+					       GET_PS, 0, NULL, false);
+			if (ret)
+				return -1;
 		}
 
 		if (drcs) {
Signature · 1 line
2.29.1
#0 lore raw

cover mwifiex: disable ps_mode by default for stability

Hello all,

On Microsoft Surface devices (PCIe-88W8897), we are observing stability issues when ps_mode (IEEE power_save) is enabled, then eventually causes firmware crash. Especially on 5GHz APs, the connection is completely unstable and almost unusable.

I think the most desirable change is to fix the ps_mode itself. But is seems to be hard work [1], I'm afraid we have to go this way.

Therefore, the first patch of this series disables the ps_mode by default instead of enabling it on driver init. I'm not sure if explicitly disabling it is really required or not. I don't have access to the details of this chip. Let me know if it's enough to just remove the code that enables ps_mode.

The Second patch adds a new module parameter named "allow_ps_mode". Since other wifi drivers just disable power_save by default by module parameter like this, I also added this.

The third patch adds a message when ps_mode will be changed. Useful when diagnosing connection issues.

Thanks,
Tsuchiya Yuto

[1] https://bugzilla.kernel.org/show_bug.cgi?id=109681

Tsuchiya Yuto (3):
mwifiex: disable ps_mode explicitly by default instead
mwifiex: add allow_ps_mode module parameter
mwifiex: print message when changing ps_mode

 .../net/wireless/marvell/mwifiex/cfg80211.c   | 23 +++++++++++++++++++
 .../net/wireless/marvell/mwifiex/sta_cmd.c    | 11 ++++++---
 2 files changed, 31 insertions(+), 3 deletions(-)
Signature · 1 line
2.29.1
#10 lore raw

Re: [PATCH 2/3] mwifiex: add allow_ps_mode module parameter

In reply to Brian Norris
Quoted 5 lines · Brian Norris
Quoted 3 lines · Tsuchiya Yuto

To make the ps_mode (power_save) control easier, this commit adds a new module parameter allow_ps_mode and set it false (disallowed) by default.

This sounds like some form of access control, not something that makes power control "easier"? What exactly is the use case.

Also, module params in networking devices are discouraged.

maintainer
#2 lore raw

Re: [PATCH 1/3] mwifiex: disable ps_mode explicitly by default instead

In reply to Tsuchiya Yuto
Quoted 10 lines · Tsuchiya Yuto

On Microsoft Surface devices (PCIe-88W8897), the ps_mode causes connection unstable, especially with 5GHz APs. Then, it eventually causes fw crash.

This commit disables ps_mode by default instead of enabling it.

Required code is extracted from mwifiex_drv_set_power().

You should read up on WIPHY_FLAG_PS_ON_BY_DEFAULT and CONFIG_CFG80211_DEFAULT_PS, and set/respect those appropriately (hint:
mwifiex sets WIPHY_FLAG_PS_ON_BY_DEFAULT, and your patch makes this a lie). Also, this seems like a quirk that you haven't properly worked out -- if you're working on a quirk framework in your other series, you should just key into that.

For the record, Chrome OS supports plenty of mwifiex systems with 8897 (SDIO only) and 8997 (PCIe), with PS enabled, and you're hurting those. Your problem sounds to be exclusively a problem with the PCIe 8897 firmware.

As-is, NAK.

Brian

#3 lore raw

Re: [PATCH 1/3] mwifiex: disable ps_mode explicitly by default instead

Quoted 1 line · Brian Norris

On Wed, Oct 28, 2020 at 7:04 PM Tsuchiya Yuto <[email protected]> wrote:

...

Quoted 4 lines

For the record, Chrome OS supports plenty of mwifiex systems with 8897 (SDIO only) and 8997 (PCIe), with PS enabled, and you're hurting those. Your problem sounds to be exclusively a problem with the PCIe 8897 firmware.

And this feeling (that it's a FW issue) what I have. But the problem here, that Marvell didn't fix and probably won't fix their FW...

Just wondering if Google (and MS in their turn) use different firmwares to what we have available in Linux.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
maintainer
#4 lore raw

Re: [PATCH 1/3] mwifiex: disable ps_mode explicitly by default instead

Quoted 2 lines · Andy Shevchenko

And this feeling (that it's a FW issue) what I have. But the problem here, that Marvell didn't fix and probably won't fix their FW...

Sure, I wouldn't hold your breath. So some of these tactics (disabling PS, etc.) may be valid, but you have to do them smartly, acknowledging that there are other (more stable) firmwares and chips in use for this same driver.

Quoted 2 lines

Just wondering if Google (and MS in their turn) use different firmwares to what we have available in Linux.

No clue about MS. But Chrom{e,ium} OS generally publishes all this stuff where possible. You can see what we use here:

https://chromium.googlesource.com/chromiumos/third_party/linux-firmware/+/HEAD/mrvl/
https://chromium.googlesource.com/chromiumos/third_party/marvell/+/HEAD/

We try to stay somewhat in sync / parallel with "upstream" linux-firmware, and strongly encourage vendors to send the same binaries upstream when they hand them to us, but there are exceptions and oversights (e.g., old products might have used a different firmware branch).

Notably, I'll repeat: we (Chrome OS) don't actually support the PCIe variant of 8897, so the report in question ("PCIe-88W8897") has no equivalent in a supported Chrome OS system (even if there are binaries in the links above, we don't use them). I would not be surprised if there are an enormous number of firmware bugs there, as there were initially for PCIe-88W8997 (which we do support).

Brian

#16 lore raw
In reply to Tsuchiya Yuto
Quoted 16 lines · Tsuchiya Yuto

Hello all,

On Microsoft Surface devices (PCIe-88W8897), we are observing stability issues when ps_mode (IEEE power_save) is enabled, then eventually causes firmware crash. Especially on 5GHz APs, the connection is completely unstable and almost unusable.

I think the most desirable change is to fix the ps_mode itself. But is seems to be hard work [1], I'm afraid we have to go this way.

Therefore, the first patch of this series disables the ps_mode by default instead of enabling it on driver init. I'm not sure if explicitly disabling it is really required or not. I don't have access to the details of this chip. Let me know if it's enough to just remove the code that enables ps_mode.

Quoted 8 lines

The Second patch adds a new module parameter named "allow_ps_mode". Since other wifi drivers just disable power_save by default by module parameter like this, I also added this.

The third patch adds a message when ps_mode will be changed. Useful when diagnosing connection issues.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=109681

Can you attach this to the actual patch as BugLink: tag?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#12 lore raw

Re: [PATCH 2/3] mwifiex: add allow_ps_mode module parameter

In reply to Brian Norris
Quoted 8 lines · Brian Norris
Quoted 3 lines · Tsuchiya Yuto

To make the ps_mode (power_save) control easier, this commit adds a new module parameter allow_ps_mode and set it false (disallowed) by default.

This sounds like a bad idea, as it breaks all the existing users who expect this feature to be allowed. Seems like you should flip the defaults. Without some better justification, NACK.

Thanks for the review! I wanted to open a discussion widely and wanted to ask from the upstream developers the direction of how this stability issue should be resolved.

I added the link to the Bugzilla in the cover-letter (that should have arrived on the mailing list now), but I should have added this to every commit as well:

This stability issue exists for a long time. I also submitted there the required kernel log and device_dump more than three months ago. However, unfortunately, it's not fixed yet. So, I have to send a series like this.

If we know that the power_save feature is broken (on some devices), I think it should be fixed in either firmware or driver for the affected devices. It makes no sense to keep enabling the broken features by default.

Because userspace tools sometimes try to enable power_save anyway regardless of default driver settings (expecting it's not broken, but in fact it's broken), the module parameter like this is required in addition to the first patch of this series. The commit 8298383c2cd5 ("ath9k: Do not support PowerSave by default") also does the same thing for this purpose.

On the other hand, I agree that I don't want to break the existing users. As you mentioned in the reply to the first patch, I can set the default value of this parameter depending on the chip id (88W8897) or DMI matching.

Quoted 2 lines

Also, I can't find the other 2 patches in this alleged series. Maybe they're still making it through the mailing lists and archives.

Yes, there seems to be a problem with the mailing list at the time. All the other patches I sent have arrived by now.

Quoted 9 lines

Brian

Quoted 7 lines

When this parameter is set to false, changing the power_save mode will be disallowed like the following:

    $ sudo iw dev mlan0 set power_save on
    command failed: Operation not permitted (-1)
#11 lore raw

Re: [PATCH 2/3] mwifiex: add allow_ps_mode module parameter

In reply to Willem de Bruijn
Quoted 9 lines · Willem de Bruijn
Quoted 5 lines · Brian Norris
Quoted 3 lines · Tsuchiya Yuto

To make the ps_mode (power_save) control easier, this commit adds a new module parameter allow_ps_mode and set it false (disallowed) by default.

This sounds like some form of access control, not something that makes power control "easier"? What exactly is the use case.

Thanks for the review!

As I replied to Brian, userspace tools sometimes try to enable power_save anyway regardless of default driver settings (expecting it's not broken, but in fact it's broken), the module parameter like this is required.

So, the commit message is misleading. What will be "easier" is letting userspace tools know power_save should be off, not the procedure of toggling ps_mode state in the driver.

Quoted 1 line

Also, module params in networking devices are discouraged.

Even though it should be avoided, some upstream drivers provide a module parameter like this to let users enable it if needed (since they disable power_save by default because of stability on some devices) likw this commit 0172b0292649 ("iwlagn: add power_save module parameter").

#5 lore raw

Re: [PATCH 1/3] mwifiex: disable ps_mode explicitly by default instead

In reply to Brian Norris
Quoted 10 lines · Brian Norris
Quoted 9 lines · Tsuchiya Yuto

On Microsoft Surface devices (PCIe-88W8897), the ps_mode causes connection unstable, especially with 5GHz APs. Then, it eventually causes fw crash.

This commit disables ps_mode by default instead of enabling it.

Required code is extracted from mwifiex_drv_set_power().

Quoted 8 lines
Quoted 1 line

You should read up on WIPHY_FLAG_PS_ON_BY_DEFAULT and CONFIG_CFG80211_DEFAULT_PS, and set/respect those appropriately (hint:
mwifiex sets WIPHY_FLAG_PS_ON_BY_DEFAULT, and your patch makes this a lie). Also, this seems like a quirk that you haven't properly worked out -- if you're working on a quirk framework in your other series, you should just key into that.

Thanks for the review! I didn't know about the flag, much appreciated. By setting the flag to false explicitly, indeed userspace doesn't try to enable power_save now at least for this short amount of time. I wonder if I can drop the second patch (adding module parameter) now. But I still want to make sure that power_save won't be enabled by userspace tools by default.

Regarding quirks, I also don't want to break existing users. So, of course I can try to use the quirk framework if we really can't fix the firmware.

Quoted 4 lines

For the record, Chrome OS supports plenty of mwifiex systems with 8897 (SDIO only) and 8997 (PCIe), with PS enabled, and you're hurting those. Your problem sounds to be exclusively a problem with the PCIe 8897 firmware.

Actually, I already know that some Chromebooks use these mwifiex cards (but not out PCIe-88W8897) because I personally like chromiumos. I'm always wondering what is the difference. If the difference is firmware, our PCIe-88W8897 firmware should really be fixed instead of this stupid series.

Yes, I'm sorry that I know this series is just a stupid one but I have to send this anyway because this stability issue has not been fixed for a long time. I should have added this buglink to every commit as well:

If the firmware can't be fixed, I'm afraid I have to go this way. It makes no sense to keep enabling power_save for the affected devices if we know it's broken.

Quoted 3 lines

As-is, NAK.

Brian

#17 lore raw
In reply to Andy Shevchenko
Quoted 21 lines · Andy Shevchenko
Quoted 20 lines · Tsuchiya Yuto

Hello all,

On Microsoft Surface devices (PCIe-88W8897), we are observing stability issues when ps_mode (IEEE power_save) is enabled, then eventually causes firmware crash. Especially on 5GHz APs, the connection is completely unstable and almost unusable.

I think the most desirable change is to fix the ps_mode itself. But is seems to be hard work [1], I'm afraid we have to go this way.

Therefore, the first patch of this series disables the ps_mode by default instead of enabling it on driver init. I'm not sure if explicitly disabling it is really required or not. I don't have access to the details of this chip. Let me know if it's enough to just remove the code that enables ps_mode.

The Second patch adds a new module parameter named "allow_ps_mode". Since other wifi drivers just disable power_save by default by module parameter like this, I also added this.

Quoted 7 lines
Quoted 4 lines

The third patch adds a message when ps_mode will be changed. Useful when diagnosing connection issues.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=109681

Can you attach this to the actual patch as BugLink: tag?

Thanks! Indeed I should have added this... I wrote it in the replies. If I send the v2 version of this series, I'll add it to them.

#13 lore raw

Re: [PATCH 2/3] mwifiex: add allow_ps_mode module parameter

In reply to Tsuchiya Yuto
Quoted 1 line · Tsuchiya Yuto

On Wed, 2020-10-28 at 15:04 -0700, Brian Norris wrote:

...

Quoted 3 lines

On the other hand, I agree that I don't want to break the existing users. As you mentioned in the reply to the first patch, I can set the default value of this parameter depending on the chip id (88W8897) or DMI matching.

Since it's a PCIe device you already have ID table where you may add a driver_data with what ever quirks are needed.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#14 lore raw

Re: [PATCH 2/3] mwifiex: add allow_ps_mode module parameter

Quoted 11 lines · Andy Shevchenko
Quoted 1 line · Tsuchiya Yuto

On Wed, 2020-10-28 at 15:04 -0700, Brian Norris wrote:

...

Quoted 3 lines

On the other hand, I agree that I don't want to break the existing users. As you mentioned in the reply to the first patch, I can set the default value of this parameter depending on the chip id (88W8897) or DMI matching.

Since it's a PCIe device you already have ID table where you may add a driver_data with what ever quirks are needed.

Sorry that my comment was misleading. I meant using the quirk framework (that is based on DMI matching) I sent in another series. This applies to the other replies from me.

However, thanks to your comment, I remembered that currently, the quirk framework can be used only within pcie.c file. For example, the quirk initialization is currently done in pcie.c file. The mwifiex driver is divided into interface-specific modules (PCIe, SDIO, USB) (e.g., mwifiex_pcie module for PCIe interface) + common module (mwifiex module).

So, I need to extend the quirk framework so that it can be used by the mwifiex module globally.

I'll make a v2 version of this series with using the updated quirk framework so that it won't change behaviors for existing users.

maintainer
#6 lore raw

Re: [PATCH 1/3] mwifiex: disable ps_mode explicitly by default instead

In reply to Tsuchiya Yuto
Quoted 11 lines · Tsuchiya Yuto
Quoted 4 lines · Brian Norris

For the record, Chrome OS supports plenty of mwifiex systems with 8897 (SDIO only) and 8997 (PCIe), with PS enabled, and you're hurting those. Your problem sounds to be exclusively a problem with the PCIe 8897 firmware.

Actually, I already know that some Chromebooks use these mwifiex cards (but not out PCIe-88W8897) because I personally like chromiumos. I'm always wondering what is the difference. If the difference is firmware, our PCIe-88W8897 firmware should really be fixed instead of this stupid series.

PCIe is a very different beast. (For one, it uses DMA and memory-mapped registers, where SDIO has neither.) It was a very difficult slog to get PCIe/8997 working reliably for the few Chromebooks that shipped it, and lots of that work is in firmware. I would not be surprised if the PCIe-related changes Marvell made for 8997 never fed back into their PCIe-8897 firmware. Or maybe they only ever launched PCIe-8897 for Windows, and the Windows driver included workarounds that were never published to their Linux driver. But now I'm just speculating.

Quoted 9 lines

Yes, I'm sorry that I know this series is just a stupid one but I have to send this anyway because this stability issue has not been fixed for a long time. I should have added this buglink to every commit as well:

If the firmware can't be fixed, I'm afraid I have to go this way. It makes no sense to keep enabling power_save for the affected devices if we know it's broken.

Condolences and sympathy, seriously. You likely have little chance of getting the firmware fixed, so without new information (e.g,. other workarounds?), this is the probably the right way to go.

Brian

#7 lore raw

Re: [PATCH 1/3] mwifiex: disable ps_mode explicitly by default instead

Quoted 13 lines · Brian Norris
Quoted 11 lines · Tsuchiya Yuto
Quoted 4 lines · Brian Norris

For the record, Chrome OS supports plenty of mwifiex systems with 8897 (SDIO only) and 8997 (PCIe), with PS enabled, and you're hurting those. Your problem sounds to be exclusively a problem with the PCIe 8897 firmware.

Actually, I already know that some Chromebooks use these mwifiex cards (but not out PCIe-88W8897) because I personally like chromiumos. I'm always wondering what is the difference. If the difference is firmware, our PCIe-88W8897 firmware should really be fixed instead of this stupid series.

Quoted 9 lines

PCIe is a very different beast. (For one, it uses DMA and memory-mapped registers, where SDIO has neither.) It was a very difficult slog to get PCIe/8997 working reliably for the few Chromebooks that shipped it, and lots of that work is in firmware. I would not be surprised if the PCIe-related changes Marvell made for 8997 never fed back into their PCIe-8897 firmware. Or maybe they only ever launched PCIe-8897 for Windows, and the Windows driver included workarounds that were never published to their Linux driver. But now I'm just speculating.

Thanks. Yeah, this is indeed hard work. Actually, I (and maybe also other users) am already thankful that there is wifi driver/firmware available on Linux :) and it'll be greater if we can fix ps_mode-related issues.

Quoted 6 lines
Quoted 6 lines

Yes, I'm sorry that I know this series is just a stupid one but I have to send this anyway because this stability issue has not been fixed for a long time. I should have added this buglink to every commit as well:

Quoted 7 lines
Quoted 3 lines

If the firmware can't be fixed, I'm afraid I have to go this way. It makes no sense to keep enabling power_save for the affected devices if we know it's broken.

Condolences and sympathy, seriously. You likely have little chance of getting the firmware fixed, so without new information (e.g,. other workarounds?), this is the probably the right way to go.

Thank you for the pointer!

There are two issues regarding ps_mode:
1) fw crashes with "Firmware wakeup failed"
(I haven't mentioned in this series, but ps_mode also causes fw crashes)
2) connection instability (like large ping delay or even ping not reaching)

If anyone is ever interested in dmesg log with debug_mask=0xffffffff and device_dump, I posted them to the Bugzilla [1] before.

Regarding the #2, although this is even not a workaround but I found scanning APs will fix this. So, when I encounter this issue, I keep scanning APs like "watch -n10 sudo iw dev ${dev_name} scan". So, it seems that scanning APs will somehow wake wifi up? In other words, wifi is sleeping when it shouldn't? or wifi somehow failed to wake up when it should?

Regarding #1, we don't have any ideas yet. There is a guess that memory leak will occur in the fw every time wifi goes into sleep, but don't know.

We even don't have the exact reproducers for both #1 and #2. What we know so far is that, enabling ps_mode causes these issues.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=109681#c130

Quoted 1 line

Brian

#18 lore raw
In reply to Tsuchiya Yuto

Hello!

Please CC me in future for mwifiex discussion :-)

Quoted 16 lines · On Wednesday 28 October 2020 23:24:30 Tsuchiya Yuto wrote:

Hello all,

On Microsoft Surface devices (PCIe-88W8897), we are observing stability issues when ps_mode (IEEE power_save) is enabled, then eventually causes firmware crash. Especially on 5GHz APs, the connection is completely unstable and almost unusable.

I think the most desirable change is to fix the ps_mode itself. But is seems to be hard work [1], I'm afraid we have to go this way.

Therefore, the first patch of this series disables the ps_mode by default instead of enabling it on driver init. I'm not sure if explicitly disabling it is really required or not. I don't have access to the details of this chip. Let me know if it's enough to just remove the code that enables ps_mode.

Quoted 6 lines

The Second patch adds a new module parameter named "allow_ps_mode". Since other wifi drivers just disable power_save by default by module parameter like this, I also added this.

The third patch adds a message when ps_mode will be changed. Useful when diagnosing connection issues.

There are more issues with power save API and implementation in mwifiex.

See my email for more details:
https://lore.kernel.org/linux-wireless/20200609111544.v7u5ort3yk4s7coy@pali/T/#u

These patches would just break power save API and reporting status to userspace even more due to WIPHY_FLAG_PS_ON_BY_DEFAULT and CONFIG_CFG80211_DEFAULT_PS options.

I would suggest to first fix issues mentioned in my email and then start providing a way how to blacklist or whitelist power save feature depending on firmware or card/chip version.

From my experience I know that e.g. 88W8997 cards have lot of bugs in their firmware and I'm not aware that bugs are going to be fixed... So we really need workarounds, like disabling power save mode to have cards usable.

Quoted 17 lines

Thanks,
Tsuchiya Yuto

[1] https://bugzilla.kernel.org/show_bug.cgi?id=109681

Tsuchiya Yuto (3):
mwifiex: disable ps_mode explicitly by default instead
mwifiex: add allow_ps_mode module parameter
mwifiex: print message when changing ps_mode

 .../net/wireless/marvell/mwifiex/cfg80211.c   | 23 +++++++++++++++++++
 .../net/wireless/marvell/mwifiex/sta_cmd.c    | 11 ++++++---
 2 files changed, 31 insertions(+), 3 deletions(-)
Signature · 1 line
2.29.1