dt-bindings: watchdog: fsl-imx: document NXP compatibles
PATCH v2 1/2 dt-bindings: watchdog: fsl-imx: document NXP compatibles
Document all ARMv5, ARMv6, ARMv7 and ARMv8 NXP (i.MX, Layerscape) compatibles used in DTSes (even though driver binds only to fsl,imx21-wdt) to fix dtbs_check warnings like:
arch/arm/boot/dts/imx53-qsb.dt.yaml: gpio@53fe0000: compatible:
['fsl,imx53-gpio', 'fsl,imx35-gpio'] is not valid under any of the given schemas
---
Changes since v1:
1. Add also Layerscape,
2. Add Rob's review tag.
--- .../bindings/watchdog/fsl-imx-wdt.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml +16 -0
@@ -18,10 +18,26 @@ properties: - const: fsl,imx21-wdt - items: - enum: + - fsl,imx25-wdt + - fsl,imx27-wdt + - fsl,imx31-wdt + - fsl,imx35-wdt + - fsl,imx50-wdt + - fsl,imx51-wdt + - fsl,imx53-wdt + - fsl,imx6q-wdt + - fsl,imx6sl-wdt + - fsl,imx6sll-wdt + - fsl,imx6sx-wdt + - fsl,imx6ul-wdt + - fsl,imx7d-wdt - fsl,imx8mm-wdt - fsl,imx8mn-wdt - fsl,imx8mp-wdt - fsl,imx8mq-wdt + - fsl,ls1012a-wdt + - fsl,ls1043a-wdt + - fsl,vf610-wdt - const: fsl,imx21-wdt reg:
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH v2 2/2 ARM: dts: freescale: align watchdog node name with dtschema
The dtschema expects watchdog device node name to be "watchdog":
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dt.yaml: wdog@2ad0000:
$nodename:0: 'wdog@2ad0000' does not match '^watchdog(@.*|-[0-9a-f])?$'
---
Changes since v1:
1. New patch
--- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +1 -1
@@ -401,7 +401,7 @@ gpio1: gpio@2310000 { #interrupt-cells = <2>; }; - wdog0: wdog@2ad0000 { + wdog0: watchdog@2ad0000 { compatible = "fsl,ls1012a-wdt", "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>;
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +1 -1
@@ -725,7 +725,7 @@ lpuart5: serial@29a0000 { status = "disabled"; }; - wdog0: wdog@2ad0000 { + wdog0: watchdog@2ad0000 { compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <0 83 0x4>;
Signature · 7 lines
2.25.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Shawn Guo
AppliedQuoted 9 lines · Krzysztof Kozlowski
Document all ARMv5, ARMv6, ARMv7 and ARMv8 NXP (i.MX, Layerscape) compatibles used in DTSes (even though driver binds only to fsl,imx21-wdt) to fix
dtbs_checkwarnings like:
arch/arm/boot/dts/imx53-qsb.dt.yaml: gpio@53fe0000: compatible:
['fsl,imx53-gpio', 'fsl,imx35-gpio'] is not valid under any of the given schemasSigned-off-by Krzysztof Kozlowski <[email protected]>Reviewed-by Rob Herring <[email protected]>
Applied, thanks.
Re: [PATCH v2 2/2] ARM: dts: freescale: align watchdog node name with dtschema
In reply to Krzysztof KozlowskiQuoted 6 lines · Krzysztof Kozlowski
The dtschema expects watchdog device node name to be "watchdog":
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dt.yaml: wdog@2ad0000:$nodename:0: 'wdog@2ad0000' does not match '^watchdog(@.*|-[0-9a-f])?$'Signed-off-by Krzysztof Kozlowski <[email protected]>
s/ARM/arm64 in subject.
I fixed it up and applied the patch.
Shawn
Quoted 9 lines
---
Changes since v1:
1. New patch--- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)