arm64: dts: marvell: espressobin: Add ethernet switch aliases
Subsystems (3)
PATCH 1/1 arm64: dts: marvell: espressobin: Add ethernet switch aliases
commit b64d814257b027e29a474bcd660f6372490138c7 upstream.
Espressobin boards have 3 ethernet ports and some of them got assigned more then one MAC address. MAC addresses are stored in U-Boot environment.
Since commit a2c7023f7075c ("net: dsa: read mac address from DT for slave device") kernel can use MAC addresses from DT for particular DSA port.
Currently Espressobin DTS file contains alias just for ethernet0.
This patch defines additional ethernet aliases in Espressobin DTS files, so bootloader can fill correct MAC address for DSA switch ports if more MAC addresses were specified.
DT alias ethernet1 is used for wan port, DT aliases ethernet2 and ethernet3 are used for lan ports for both Espressobin revisions (V5 and V7).
---
This patch is backport for 5.4 and 4.19 stable releases. From original patch were removed changes for Espressobin revision V7 as these older kernel versions have DTS files only for Espressobin revision V5.
Note that this patch depends on commit a2c7023f7075c ("dsa: read mac address") as stated on Cc: line and for 4.19 release needs to be backported first.
--- .../boot/dts/marvell/armada-3720-espressobin.dts | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +8 -4
@@ -21,6 +21,10 @@ aliases { ethernet0 = ð0; + /* for dsa slave device */ + ethernet1 = &switch0port1; + ethernet2 = &switch0port2; + ethernet3 = &switch0port3; serial0 = &uart0; serial1 = &uart1; };
@@ -147,7 +151,7 @@ #address-cells = <1>; #size-cells = <0>; - port@0 { + switch0port0: port@0 { reg = <0>; label = "cpu"; ethernet = <ð0>;
@@ -158,19 +162,19 @@ }; }; - port@1 { + switch0port1: port@1 { reg = <1>; label = "wan"; phy-handle = <&switch0phy0>; }; - port@2 { + switch0port2: port@2 { reg = <2>; label = "lan0"; phy-handle = <&switch0phy1>; }; - port@3 { + switch0port3: port@3 { reg = <3>; label = "lan1"; phy-handle = <&switch0phy2>;
Signature · 1 line
2.20.1
Greg KH
maintainerQuoted 30 lines · Pali Rohár
commit
b64d814257b027e29a474bcd660f6372490138c7upstream.Espressobin boards have 3 ethernet ports and some of them got assigned more then one MAC address. MAC addresses are stored in U-Boot environment.
Since commit
a2c7023f7075c("net: dsa: read mac address from DT for slave device") kernel can use MAC addresses from DT for particular DSA port.Currently Espressobin DTS file contains alias just for ethernet0.
This patch defines additional ethernet aliases in Espressobin DTS files, so bootloader can fill correct MAC address for DSA switch ports if more MAC addresses were specified.
DT alias ethernet1 is used for wan port, DT aliases ethernet2 and ethernet3 are used for lan ports for both Espressobin revisions (V5 and V7).
Fixes 5253cb8c00a6f ("arm64: dts: marvell: espressobin: add ethernet alias")Cc <[email protected]> # a2c7023f7075c: dsa: read mac addressSigned-off-by Pali Rohár <[email protected]>Reviewed-by Andrew Lunn <[email protected]>Reviewed-by Andre Heider <[email protected]>Signed-off-by Gregory CLEMENT <[email protected]>[pali: Backported Espressobin rev V5 changes to 5.4 and 4.19 versions]---
This patch is backport for 5.4 and 4.19 stable releases. From original patch were removed changes for Espressobin revision V7 as these older kernel versions have DTS files only for Espressobin revision V5.
Quoted 6 lines
Note that this patch depends on commit
a2c7023f7075c("dsa: read mac address") as stated on Cc: line and for 4.19 release needs to be backported first.--- .../boot/dts/marvell/armada-3720-espressobin.dts | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
Now queued up, thanks.
greg k-h