net: pfe_eth: fix crash with secure boot on LS1012A
PATCH 1/1 net: pfe_eth: fix crash with secure boot on LS1012A
From: Biwen Li <[email protected]>
Fix crash with secure boot as follows,
Net: SF: Detected s25fs512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB "Synchronous Abort" handler, esr 0x96000210 elr: 000000008206db44 lr : 0000000082004ea0 (reloc) elr: 00000000b7ba6b44 lr : 00000000b7b3dea0 x0 : 00000000b79407e8 x1 : 0000000040640000 x2 : 0000000000000050 x3 : 0000000000000000 x4 : 000000000000000a x5 : 0000000000000050 x6 : 0000000000000366 x7 : 00000000b7942308 x8 : 00000000b76407c0 x9 : 0000000000000008 x10: 0000000000000044 x11: 00000000b7634d1c x12: 000000000000004f x13: 0000000000000044 x14: 00000000b7634d98 x15: 00000000b76407c0 x16: 0000000000000000 x17: 0000000000000000 x18: 00000000b7636dd8 x19: 0000000000000000 x20: 00000000b79407d0 x21: 00000000b79407e8 x22: 0000000040640000 x23: 00000000b7634e58 x24: 0000000000000000 x25: 0000000003800000 x26: 00000000b7bdd000 x27: 0000000000000000 x28: 0000000000000000 x29: 00000000b7634d10 Code: d2800003 eb03005f 54000101 d65f03c0 (f8636826) Resetting CPU ...
Signed-off-by Biwen Li <[email protected]>
--- board/freescale/ls1012afrdm/Kconfig | 11 +++++ board/freescale/ls1012aqds/Kconfig | 14 +++++-- board/freescale/ls1012ardb/Kconfig | 18 +++++++-- drivers/net/pfe_eth/pfe_firmware.c | 62 +++++++++++++++++++++++++---- 4 files changed, 92 insertions(+), 13 deletions(-)
board/freescale/ls1012afrdm/Kconfig +11 -0
@@ -16,6 +16,10 @@ config SYS_LS_PFE_FW_ADDR hex "Flash address of PFE firmware" default 0x40a00000 +config SYS_LS_PFE_FW_LENGTH + hex "length of PFE firmware" + default 0x40000 + config SYS_LS_PPA_FW_ADDR hex "PPA Firmware Addr" default 0x40400000
@@ -65,6 +69,10 @@ config SYS_LS_PFE_FW_ADDR hex "Flash address of PFE firmware" default 0x40020000 +config SYS_LS_PFE_FW_LENGTH + hex "length of PFE firmware" + default 0x40000 + config SYS_LS_PPA_FW_ADDR hex "PPA Firmware Addr" default 0x40060000
@@ -77,6 +85,9 @@ config SYS_LS_PFE_ESBC_ADDR hex "PFE Firmware HDR Addr" default 0x401f8000 +config SYS_LS_PFE_ESBC_LENGTH + hex "length of PFE Firmware HDR" + default 0xc00 endif if TARGET_LS1012AFRDM || TARGET_LS1012AFRWY
board/freescale/ls1012aqds/Kconfig +11 -3
@@ -20,6 +20,14 @@ if CHAIN_OF_TRUST config SYS_LS_PPA_ESBC_ADDR hex "PPA Firmware HDR Addr" default 0x40680000 + +config SYS_LS_PFE_ESBC_ADDR + hex "PFE Firmware HDR Addr" + default 0x40700000 + +config SYS_LS_PFE_ESBC_LENGTH + hex "length of PFE Firmware HDR" + default 0xc00 endif if FSL_PFE
@@ -39,9 +47,9 @@ config SYS_LS_PFE_FW_ADDR hex "Flash address of PFE firmware" default 0x40a00000 -config SYS_LS_PFE_ESBC_ADDR - hex "PFE Firmware HDR Addr" - default 0x40700000 +config SYS_LS_PFE_FW_LENGTH + hex "length of PFE firmware" + default 0x300000 config DDR_PFE_PHYS_BASEADDR hex "PFE DDR physical base address"
board/freescale/ls1012ardb/Kconfig +15 -3
@@ -20,6 +20,14 @@ if CHAIN_OF_TRUST config SYS_LS_PPA_ESBC_ADDR hex "PPA Firmware HDR Addr" default 0x40680000 + +config SYS_LS_PFE_ESBC_ADDR + hex "PFE Firmware HDR Addr" + default 0x40640000 + +config SYS_LS_PFE_ESBC_LENGTH + hex "length of PFE Firmware HDR" + default 0xc00 endif if FSL_PFE
@@ -33,9 +41,9 @@ config SYS_LS_PFE_FW_ADDR hex "Flash address of PFE firmware" default 0x40a00000 -config SYS_LS_PFE_ESBC_ADDR - hex "PFE Firmware HDR Addr" - default 0x40640000 +config SYS_LS_PFE_FW_LENGTH + hex "length of PFE firmware" + default 0x300000 config DDR_PFE_PHYS_BASEADDR hex "PFE DDR physical base address"
@@ -89,6 +97,10 @@ config SYS_LS_PFE_FW_ADDR hex "Flash address of PFE firmware" default 0x40a00000 +config SYS_LS_PFE_FW_LENGTH + hex "length of PFE firmware" + default 0x300000 + config DDR_PFE_PHYS_BASEADDR hex "PFE DDR physical base address" default 0x03800000
drivers/net/pfe_eth/pfe_firmware.c +55 -7
102 lines not on this page · raw message
Signature · 1 line
2.17.1