arm64: dts: ti: J721E: PCIe/SERDES DT Fixes
Subsystems (2)
cover arm64: dts: ti: J721E: PCIe/SERDES DT Fixes
Series includes 2 DT fixes
1) Fix the maximum number of outbound regions
2) Re-name link name as "phy" as commented by Rob in a different patch
[1] and the YAML schema posted in lkml will check the subnode as "phy" [2]
[1] -> http://lore.kernel.org/r/20200909203631.GA3026331@bogus
[2] -> http://lore.kernel.org/r/[email protected]
Kishon Vijay Abraham I (2):
arm64: dts: ti: k3-j721e-main: Fix PCIe maximum outbound regions
arm64: dts: ti: k3-j721e-common-proc-board: Re-name link name as "phy"
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 8 ++++---- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-)
Signature · 1 line
2.17.1
PATCH 1/2 arm64: dts: ti: k3-j721e-main: Fix PCIe maximum outbound regions
PCIe controller in J721E supports a maximum of 32 outbound regions. commit 4e5833884f66 ("arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodes") incorrectly added maximum number of outbound regions to 16. Fix it here.
--- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +4 -4
@@ -652,7 +652,7 @@ power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 239 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; + cdns,max-outbound-regions = <32>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent;
@@ -701,7 +701,7 @@ power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 240 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; + cdns,max-outbound-regions = <32>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent;
@@ -750,7 +750,7 @@ power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 241 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; + cdns,max-outbound-regions = <32>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent;
@@ -799,7 +799,7 @@ power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 242 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; + cdns,max-outbound-regions = <32>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent;
Signature · 1 line
2.17.1
PATCH 2/2 arm64: dts: ti: k3-j721e-common-proc-board: Re-name "link" name as "phy"
In reply to Kishon Vijay Abraham ICommit 66db854b1f62d ("arm64: dts: ti: k3-j721e-common-proc-board:
Configure the PCIe instances") and
commit 02c35dca2b488 ("arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0") added PHY DT nodes with node name as "link" However nodes with #phy-cells should be named 'phy'. Re-name subnodes of serdes in J721E to 'phy'.
--- arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +4 -4
@@ -325,7 +325,7 @@ }; &serdes3 { - serdes3_usb_link: link@0 { + serdes3_usb_link: phy@0 { reg = <0>; cdns,num-lanes = <2>; #phy-cells = <0>;
@@ -561,7 +561,7 @@ }; &serdes0 { - serdes0_pcie_link: link@0 { + serdes0_pcie_link: phy@0 { reg = <0>; cdns,num-lanes = <1>; #phy-cells = <0>;
@@ -571,7 +571,7 @@ }; &serdes1 { - serdes1_pcie_link: link@0 { + serdes1_pcie_link: phy@0 { reg = <0>; cdns,num-lanes = <2>; #phy-cells = <0>;
@@ -581,7 +581,7 @@ }; &serdes2 { - serdes2_pcie_link: link@0 { + serdes2_pcie_link: phy@0 { reg = <0>; cdns,num-lanes = <2>; #phy-cells = <0>;
Signature · 1 line
2.17.1