arm64: dts: mcbin-singleshot: add heartbeat LED
Subsystems (2)
PATCH 1/1 arm64: dts: mcbin-singleshot: add heartbeat LED
With board revision 1.3, SolidRun moved the power LED to the middle of the board. In old place of power LED a GPIO controllable heartbeat LED was added. This commit only touches Single Shot variant, since only this variant is all revision 1.3.
Reported-by Alexandra Alth <[email protected]>
Signed-off-by Tomasz Maciej Nowak <[email protected]>
--- .../marvell/armada-8040-mcbin-singleshot.dts | 22 +++++++++++++++++++ 1 file changed, 22 insertions(+)
arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts +22 -0
@@ -5,6 +5,8 @@ * Device Tree file for MACCHIATOBin Armada 8040 community board platform */ +#include <dt-bindings/leds/common.h> + #include "armada-8040-mcbin.dtsi" / {
@@ -12,6 +14,19 @@ / { compatible = "marvell,armada8040-mcbin-singleshot", "marvell,armada8040-mcbin", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&cp0_led18_pins>; + pinctrl-names = "default"; + + led18 { + gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; + linux,default-trigger = "heartbeat"; + }; + }; }; &cp0_eth0 {
@@ -27,3 +42,10 @@ &cp1_eth0 { managed = "in-band-status"; sfp = <&sfp_eth1>; }; + +&cp0_pinctrl { + cp0_led18_pins: led18-pins { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; +};
Signature · 1 line
2.29.2
Gregory CLEMENT
maintainerHi,
Quoted 7 lines
With board revision 1.3, SolidRun moved the power LED to the middle of the board. In old place of power LED a GPIO controllable heartbeat LED was added. This commit only touches Single Shot variant, since only this variant is all revision 1.3.
Reported-by Alexandra Alth <[email protected]>Signed-off-by Tomasz Maciej Nowak <[email protected]>
Applied on mvebu/dt64
Thanks,
Gregory
Quoted 51 lines
--- .../marvell/armada-8040-mcbin-singleshot.dts | 22 +++++++++++++++++++ 1 file changed, 22 insertions(+)arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts +22
-0@@ -5,6 +5,8 @@ * Device Tree file for MACCHIATOBin Armada 8040 community board platform */ +#include <dt-bindings/leds/common.h> + #include "armada-8040-mcbin.dtsi" / {@@ -12,6 +14,19 @@ / { compatible = "marvell,armada8040-mcbin-singleshot", "marvell,armada8040-mcbin", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&cp0_led18_pins>; + pinctrl-names = "default"; + + led18 { + gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; + linux,default-trigger = "heartbeat"; + }; + }; }; &cp0_eth0 {@@ -27,3 +42,10 @@ &cp1_eth0 { managed = "in-band-status"; sfp = <&sfp_eth1>; }; + +&cp0_pinctrl { + cp0_led18_pins: led18-pins { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; +};Signature · 1 line
2.29.2
Signature · 3 lines
Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com