Skip to contentSkip to conversation

clk: Add hardware-enable column to clk summary

PATCH Applied Dmitry Osipenko 2 participants 2 messages Nov 15, 2020 – Dec 17, 2020 Common clk

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 clk: Add hardware-enable column to clk summary

Add "hardware enable" column to the clk summary in order to show actual hardware enable-state of all clocks. The possible states are "Y/N/?", where question mark means that state is unknown, i.e. clock isn't a mux and clk-driver doesn't support is_enabled() callback for this clock.

In conjunction with clk_ignore_unused, this tells us what unused clocks are left enabled after bootloader. This is also useful a useful aid for debugging interactions with firmware which changes clock states without notifying kernel.

---

Changelog:

v2: - Renamed "enable state" column to "hardware enable" and changed
reported values to Y/N/?

- Improved commit message.

 drivers/clk/clk.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/clk/clk.c +11 -4
index f83dac54ed85..c2cbf3618680 100644
@@ -2931,7 +2931,14 @@ static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
 	else
 		seq_puts(s, "-----");
 
-	seq_printf(s, " %6d\n", clk_core_get_scaled_duty_cycle(c, 100000));
+	seq_printf(s, " %6d", clk_core_get_scaled_duty_cycle(c, 100000));
+
+	if (c->ops->is_enabled)
+		seq_printf(s, " %9c\n", clk_core_is_enabled(c) ? 'Y' : 'N');
+	else if (!c->ops->enable)
+		seq_printf(s, " %9c\n", 'Y');
+	else
+		seq_printf(s, " %9c\n", '?');
 }
 
 static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c,
@@ -2950,9 +2957,9 @@ static int clk_summary_show(struct seq_file *s, void *data)
 	struct clk_core *c;
 	struct hlist_head **lists = (struct hlist_head **)s->private;
 
-	seq_puts(s, "                                 enable  prepare  protect                                duty\n");
-	seq_puts(s, "   clock                          count    count    count        rate   accuracy phase  cycle\n");
-	seq_puts(s, "---------------------------------------------------------------------------------------------\n");
+	seq_puts(s, "                                 enable  prepare  protect                                duty  hardware\n");
+	seq_puts(s, "   clock                          count    count    count        rate   accuracy phase  cycle    enable\n");
+	seq_puts(s, "-------------------------------------------------------------------------------------------------------\n");
 
 	clk_prepare_lock();
 
Signature · 1 line
2.29.2
maintainer Applied
#1 lore raw

Quoting Dmitry Osipenko (2020-11-15 12:34:32)

Quoted 5 lines

Add "hardware enable" column to the clk summary in order to show actual hardware enable-state of all clocks. The possible states are "Y/N/?", where question mark means that state is unknown, i.e. clock isn't a mux and clk-driver doesn't support is_enabled() callback for this clock.

Quoted 7 lines

In conjunction with clk_ignore_unused, this tells us what unused clocks are left enabled after bootloader. This is also useful a useful aid for debugging interactions with firmware which changes clock states without notifying kernel.

---

Applied to clk-next