Skip to contentSkip to conversation

arm64: dts: armada-3720-turris-mox: add 3W power capability to SFP cage

PATCH In review Marek Behún 2 participants 2 messages Nov 16, 2020 – Nov 30, 2020

Subsystems (2)
Device tree bindings Arm/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K, CN9130 SoC support
lore
Share & tools
lore

Marek Behún

author
#0 lore raw

PATCH 1/1 arm64: dts: armada-3720-turris-mox: add 3W power capability to SFP cage

Add maximum-power-milliwatt = 3000 to SFP node of Turris MOX.

Signed-off-by Marek Behún <[email protected]>
Fixes 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Cc Gregory CLEMENT <[email protected]>
Cc Andrew Lunn <[email protected]>
Cc Rob Herring <[email protected]>
Cc [email protected]
Cc [email protected]
---
 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +1 -0
index f3a678e0fd99..d032e290675f 100644
@@ -102,6 +102,7 @@ sfp: sfp {
 		mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
 		rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
 
 		/* enabled by U-Boot if SFP module is present */
 		status = "disabled";
Signature · 1 line
2.26.2
maintainer
#1 lore raw

Hi Marek,

Quoted 9 lines

Add maximum-power-milliwatt = 3000 to SFP node of Turris MOX.

Signed-off-by Marek Behún <[email protected]>
Fixes 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Cc Gregory CLEMENT <[email protected]>
Cc Andrew Lunn <[email protected]>
Cc Rob Herring <[email protected]>
Cc [email protected]
Cc [email protected]

Applied on mvebu/dt64

Thanks,

Gregory

Quoted 19 lines
---
 arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +1 -0
index f3a678e0fd99..d032e290675f 100644
@@ -102,6 +102,7 @@ sfp: sfp {
 		mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
 		rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
 
 		/* enabled by U-Boot if SFP module is present */
 		status = "disabled";
Signature · 1 line
2.26.2
Signature · 3 lines
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com