dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support
Subsystems (6)
PATCH 1/2 dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support
Add support for the PMX55 GPIO support to the Qualcomm PMIC GPIO binding.
--- Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 3 +++ 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +3 -0
@@ -29,6 +29,7 @@ PMIC's from Qualcomm. "qcom,pm8150b-gpio" "qcom,pm6150-gpio" "qcom,pm6150l-gpio" + "qcom,pmx55-gpio" And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" if the device is on an spmi bus or an ssbi bus respectively
@@ -110,6 +111,8 @@ to specify in a pin configuration subnode: gpio1-gpio12 for pm8150l (hole on gpio7) gpio1-gpio10 for pm6150 gpio1-gpio12 for pm6150l + gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 + and gpio11) - function: Usage: required
Signature · 1 line
2.26.2
PATCH 2/2 pinctrl: qcom-pmic-gpio: Add support for pmx55
PM55 pmic support gpio controller so add compatible and comment for gpio holes
--- drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +2 -0
@@ -1129,6 +1129,8 @@ static const struct of_device_id pmic_gpio_of_match[] = { { .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 }, { .compatible = "qcom,pm6150-gpio", .data = (void *) 10 }, { .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 }, + /* pmx55 has 11 GPIOs with holes on 3, 7, 10, 11 */ + { .compatible = "qcom,pmx55-gpio", .data = (void *) 11 }, { }, };
Signature · 1 line
2.26.2
Re: [PATCH 2/2] pinctrl: qcom-pmic-gpio: Add support for pmx55
Quoted 4 lines · Vinod Koul
PM55 pmic support gpio controller so add compatible and comment for gpio holes
Signed-off-by Vinod Koul <[email protected]>
Quoted 20 lines
--- drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++ 1 file changed, 2 insertions(+)drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +2
-0@@ -1129,6 +1129,8 @@ static const struct of_device_id pmic_gpio_of_match[] = { { .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 }, { .compatible = "qcom,pm6150-gpio", .data = (void *) 10 }, { .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 }, + /* pmx55 has 11 GPIOs with holes on 3, 7, 10, 11 */ + { .compatible = "qcom,pmx55-gpio", .data = (void *) 11 }, { }, };Signature · 1 line
2.26.2
Re: [PATCH 2/2] pinctrl: qcom-pmic-gpio: Add support for pmx55
In reply to Vinod KoulQuoted 4 lines · Vinod Koul
PM55 pmic support gpio controller so add compatible and comment for gpio holes
Signed-off-by Vinod Koul <[email protected]>
Patch applied!
Yours,
Linus Walleij
Quoted 4 lines · Vinod Koul
Add support for the PMX55 GPIO support to the Qualcomm PMIC GPIO binding.
Signed-off-by Vinod Koul <[email protected]>
Quoted 28 lines
--- Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 3 +++ 1 file changed, 3 insertions(+)Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +3
-0@@ -29,6 +29,7 @@ PMIC's from Qualcomm. "qcom,pm8150b-gpio" "qcom,pm6150-gpio" "qcom,pm6150l-gpio" + "qcom,pmx55-gpio" And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" if the device is on an spmi bus or an ssbi bus respectively@@ -110,6 +111,8 @@ to specify in a pin configuration subnode: gpio1-gpio12 for pm8150l (hole on gpio7) gpio1-gpio10 for pm6150 gpio1-gpio12 for pm6150l + gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 + and gpio11) - function: Usage: requiredSignature · 1 line
2.26.2
Quoted 4 lines · Vinod Koul
Add support for the PMX55 GPIO support to the Qualcomm PMIC GPIO binding.
Signed-off-by Vinod Koul <[email protected]>
Patch applied!
Yours,
Linus Walleij
This series was applied to qcom/linux.git (refs/heads/for-next):
Hello:
This series was applied to qcom/linux.git (refs/heads/for-next):
Quoted 7 lines · On Thu, 26 Nov 2020 14:51:50 +0530 you wrote:
Add support for the PMX55 GPIO support to the Qualcomm PMIC GPIO binding.
Signed-off-by Vinod Koul <[email protected]>--- Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 3 +++ 1 file changed, 3 insertions(+)
Here is the summary with links:
- [1/2] dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support
https://git.kernel.org/qcom/c/4247e3f56261 - [2/2] pinctrl: qcom-pmic-gpio: Add support for pmx55 https://git.kernel.org/qcom/c/ceb58de4365f
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html