Skip to contentSkip to conversation

doc: use real example for APRanges

PATCH Applied James Prestwood 2 participants 2 messages Dec 2, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 doc: use real example for APRanges

The docs just specified what a IP prefix looks like, not an actual example. Though its not recommended to just copy paste blindly, its still useful to have some value in the man pages that actually works if someone just wants to get a DHCP server working.

---
 src/iwd.config.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
src/iwd.config.rst +1 -1
index 37438c6c..f74e31cf 100644
@@ -86,7 +86,7 @@ The group ``[General]`` contains general settings.
      - Values: <IP in prefix notation>
 
        Sets the range of IP's used for DHCP server (AP mode). The IP should be
-       in prefix notation e.g. aaa.bbb.ccc.ddd/xx. AP's which are started in a
+       in prefix notation e.g. 192.168.1.0/24. AP's which are started in a
        profile-less configuration will use this pool of IP's to set the AP's
        interface address as well as default DHCP server options. Each AP will
        get a new subnet from the range and clients will be addressed in that
Signature · 1 line
2.26.2
#1 lore raw

Hi James,

Quoted 9 lines · James Prestwood

The docs just specified what a IP prefix looks like, not an actual example. Though its not recommended to just copy paste blindly, its still useful to have some value in the man pages that actually works if someone just wants to get a DHCP server working.

---
  src/iwd.config.rst | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

Applied, thanks.

Regards,
-Denis