Skip to contentSkip to conversation

ASoC: intel: sof_rt5682: Add support for tgl_rt1011_rt5682

PATCH In review Brent Lu 3 participants 3 messages Dec 3, 2020 – Dec 4, 2020

Subsystems (3)
lore
Share & tools
lore

Brent Lu

author
#0 lore raw

PATCH v2 1/1 ASoC: intel: sof_rt5682: Add support for tgl_rt1011_rt5682

This patch adds the driver data for two rt1011 speaker amplifiers on SSP1 and rt5682 on SSP0 for TGL platform. DAI format for rt1011 is leveraged from cml_rt1011_rt5682 which is 4-slot tdm with 100fs bclk.

---
 sound/soc/intel/boards/Kconfig                |   1 +
 sound/soc/intel/boards/Makefile               |   2 +-
 sound/soc/intel/boards/sof_realtek_common.c   | 138 ++++++++++++++++++
 sound/soc/intel/boards/sof_realtek_common.h   |  24 +++
 sound/soc/intel/boards/sof_rt5682.c           |  26 +++-
 .../intel/common/soc-acpi-intel-tgl-match.c   |  17 ++-
 6 files changed, 201 insertions(+), 7 deletions(-)
 create mode 100644 sound/soc/intel/boards/sof_realtek_common.c
 create mode 100644 sound/soc/intel/boards/sof_realtek_common.h
sound/soc/intel/boards/Kconfig +1 -0
index dddb672a6d55..b58b9b60d37e 100644
@@ -443,6 +443,7 @@ config SND_SOC_INTEL_SOF_RT5682_MACH
 		    (MFD_INTEL_LPSS || COMPILE_TEST)) ||\
 		   (SND_SOC_SOF_BAYTRAIL && (X86_INTEL_LPSS || COMPILE_TEST))
 	select SND_SOC_MAX98373_I2C
+	select SND_SOC_RT1011
 	select SND_SOC_RT1015
 	select SND_SOC_RT5682_I2C
 	select SND_SOC_DMIC
sound/soc/intel/boards/Makefile +1 -1
index a58e4d22e9c8..5f03e484b215 100644
@@ -18,7 +18,7 @@ snd-soc-sst-byt-cht-cx2072x-objs := bytcht_cx2072x.o
 snd-soc-sst-byt-cht-da7213-objs := bytcht_da7213.o
 snd-soc-sst-byt-cht-es8316-objs := bytcht_es8316.o
 snd-soc-sst-byt-cht-nocodec-objs := bytcht_nocodec.o
-snd-soc-sof_rt5682-objs := sof_rt5682.o hda_dsp_common.o sof_maxim_common.o
+snd-soc-sof_rt5682-objs := sof_rt5682.o hda_dsp_common.o sof_maxim_common.o sof_realtek_common.o
 snd-soc-cml_rt1011_rt5682-objs := cml_rt1011_rt5682.o hda_dsp_common.o
 snd-soc-kbl_da7219_max98357a-objs := kbl_da7219_max98357a.o
 snd-soc-kbl_da7219_max98927-objs := kbl_da7219_max98927.o
sound/soc/intel/boards/sof_realtek_common.c new file +138 -0

138 lines not on this page · raw message

sound/soc/intel/boards/sof_realtek_common.h new file +24 -0
new file mode 100644
index 000000000000..87cb3812b926
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2020 Intel Corporation.
+ */
+
+/*
+ * This file defines data structures used in Machine Driver for Intel
+ * platforms with Realtek Codecs.
+ */
+#ifndef __SOF_REALTEK_COMMON_H
+#define __SOF_REALTEK_COMMON_H
+
+#include <sound/soc.h>
+
+#define RT1011_CODEC_DAI	"rt1011-aif"
+#define RT1011_DEV0_NAME	"i2c-10EC1011:00"
+#define RT1011_DEV1_NAME	"i2c-10EC1011:01"
+#define RT1011_DEV2_NAME	"i2c-10EC1011:02"
+#define RT1011_DEV3_NAME	"i2c-10EC1011:03"
+
+void sof_rt1011_dai_link(struct snd_soc_dai_link *link);
+void sof_rt1011_codec_conf(struct snd_soc_card *card);
+
+#endif /* __SOF_REALTEK_COMMON_H */
sound/soc/intel/boards/sof_rt5682.c +22 -4
index 891f908659f5..8b1ca2da9bb9 100644
@@ -24,6 +24,7 @@
 #include "../common/soc-intel-quirks.h"
 #include "hda_dsp_common.h"
 #include "sof_maxim_common.h"
+#include "sof_realtek_common.h"
 
 #define NAME_SIZE 32
 
@@ -41,10 +42,11 @@
 #define SOF_RT5682_NUM_HDMIDEV_MASK		(GENMASK(12, 10))
 #define SOF_RT5682_NUM_HDMIDEV(quirk)	\
 	((quirk << SOF_RT5682_NUM_HDMIDEV_SHIFT) & SOF_RT5682_NUM_HDMIDEV_MASK)
-#define SOF_RT1015_SPEAKER_AMP_PRESENT		BIT(13)
-#define SOF_RT1015_SPEAKER_AMP_100FS		BIT(14)
-#define SOF_MAX98373_SPEAKER_AMP_PRESENT	BIT(15)
-#define SOF_MAX98360A_SPEAKER_AMP_PRESENT	BIT(16)
+#define SOF_RT1011_SPEAKER_AMP_PRESENT		BIT(13)
+#define SOF_RT1015_SPEAKER_AMP_PRESENT		BIT(14)
+#define SOF_RT1015_SPEAKER_AMP_100FS		BIT(15)
+#define SOF_MAX98373_SPEAKER_AMP_PRESENT	BIT(16)
+#define SOF_MAX98360A_SPEAKER_AMP_PRESENT	BIT(17)
 
 /* Default: MCLK on, MCLK 19.2M, SSP0  */
 static unsigned long sof_rt5682_quirk = SOF_RT5682_MCLK_EN |
@@ -741,6 +743,9 @@ static struct snd_soc_dai_link *sof_card_dai_links_create(struct device *dev,
 			links[id].codecs = max98360a_component;
 			links[id].num_codecs = ARRAY_SIZE(max98360a_component);
 			links[id].init = speaker_codec_init;
+		} else if (sof_rt5682_quirk &
+				SOF_RT1011_SPEAKER_AMP_PRESENT) {
+			sof_rt1011_dai_link(&links[id]);
 		} else {
 			links[id].codecs = max98357a_component;
 			links[id].num_codecs = ARRAY_SIZE(max98357a_component);
@@ -851,6 +856,8 @@ static int sof_audio_probe(struct platform_device *pdev)
 
 	if (sof_rt5682_quirk & SOF_MAX98373_SPEAKER_AMP_PRESENT)
 		sof_max98373_codec_conf(&sof_audio_card_rt5682);
+	else if (sof_rt5682_quirk & SOF_RT1011_SPEAKER_AMP_PRESENT)
+		sof_rt1011_codec_conf(&sof_audio_card_rt5682);
 
 	dai_links = sof_card_dai_links_create(&pdev->dev, ssp_codec, ssp_amp,
 					      dmic_be_num, hdmi_num);
@@ -931,6 +938,15 @@ static const struct platform_device_id board_ids[] = {
 					SOF_RT1015_SPEAKER_AMP_100FS |
 					SOF_RT5682_SSP_AMP(1)),
 	},
+	{
+		.name = "tgl_rt1011_rt5682",
+		.driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |
+					SOF_RT5682_SSP_CODEC(0) |
+					SOF_SPEAKER_AMP_PRESENT |
+					SOF_RT1011_SPEAKER_AMP_PRESENT |
+					SOF_RT5682_SSP_AMP(1) |
+					SOF_RT5682_NUM_HDMIDEV(4)),
+	},
 	{ }
 };
 
@@ -948,6 +964,7 @@ module_platform_driver(sof_audio)
 MODULE_DESCRIPTION("SOF Audio Machine driver");
 MODULE_AUTHOR("Bard Liao <[email protected]>");
 MODULE_AUTHOR("Sathya Prakash M R <[email protected]>");
+MODULE_AUTHOR("Brent Lu <[email protected]>");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:sof_rt5682");
 MODULE_ALIAS("platform:tgl_max98357a_rt5682");
@@ -955,3 +972,4 @@ MODULE_ALIAS("platform:jsl_rt5682_rt1015");
 MODULE_ALIAS("platform:tgl_max98373_rt5682");
 MODULE_ALIAS("platform:jsl_rt5682_max98360a");
 MODULE_ALIAS("platform:cml_rt1015_rt5682");
+MODULE_ALIAS("platform:tgl_rt1011_rt5682");
sound/soc/intel/common/soc-acpi-intel-tgl-match.c +15 -2
index 9f243e60b95c..98196e9fad62 100644
@@ -9,7 +9,7 @@
 #include <sound/soc-acpi.h>
 #include <sound/soc-acpi-intel-match.h>
 
-static struct snd_soc_acpi_codecs tgl_codecs = {
+static const struct snd_soc_acpi_codecs tgl_codecs = {
 	.num_codecs = 1,
 	.codecs = {"MX98357A"}
 };
@@ -305,11 +305,16 @@ static const struct snd_soc_acpi_link_adr tgl_3_in_1_sdca[] = {
 	{}
 };
 
-static struct snd_soc_acpi_codecs tgl_max98373_amp = {
+static const struct snd_soc_acpi_codecs tgl_max98373_amp = {
 	.num_codecs = 1,
 	.codecs = {"MX98373"}
 };
 
+static const struct snd_soc_acpi_codecs tgl_rt1011_amp = {
+	.num_codecs = 1,
+	.codecs = {"10EC1011"}
+};
+
 struct snd_soc_acpi_mach snd_soc_acpi_intel_tgl_machines[] = {
 	{
 		.id = "10EC1308",
@@ -335,6 +340,14 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_tgl_machines[] = {
 		.sof_fw_filename = "sof-tgl.ri",
 		.sof_tplg_filename = "sof-tgl-max98373-rt5682.tplg",
 	},
+	{
+		.id = "10EC5682",
+		.drv_name = "tgl_rt1011_rt5682",
+		.machine_quirk = snd_soc_acpi_codec_list,
+		.quirk_data = &tgl_rt1011_amp,
+		.sof_fw_filename = "sof-tgl.ri",
+		.sof_tplg_filename = "sof-tgl-rt1011-rt5682.tplg",
+	},
 	{},
 };
 EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_tgl_machines);
Signature · 1 line
2.17.1
maintainer
#2 lore raw
In reply to Brent Lu
Quoted 3 lines · Brent Lu

This patch adds the driver data for two rt1011 speaker amplifiers on SSP1 and rt5682 on SSP0 for TGL platform. DAI format for rt1011 is leveraged from cml_rt1011_rt5682 which is 4-slot tdm with 100fs bclk.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: intel: sof_rt5682: Add support for tgl_rt1011_rt5682

      commit: aa6cc97c0ac31c668afc7027bcf2bdb0fe4610fe

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark