Skip to contentSkip to conversation

media: rc: select CONFIG_BITREVERSE where needed

PATCH In review Arnd Bergmann 2 participants 2 messages Dec 3, 2020 – Jan 19, 2021

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 media: rc: select CONFIG_BITREVERSE where needed

From: Arnd Bergmann <[email protected]>

A number of remote control drivers require the bitreverse helper, and run into a link error when it is disabled:

arm-linux-gnueabi-ld: drivers/media/rc/img-ir/img-ir-nec.o: in function `img_ir_nec_scancode':
img-ir-nec.c:(.text+0x10c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/rc/img-ir/img-ir-nec.o: in function `img_ir_nec_filter':
img-ir-nec.c:(.text+0x2dc): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/usb/cx231xx/cx231xx-input.o: in function `get_key_isdbt':
cx231xx-input.c:(.text+0x38c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/usb/em28xx/em28xx-input.o: in function `em28xx_get_key_em_haup':
em28xx-input.c:(.text+0x1704): undefined reference to `byte_rev_table'

---
 drivers/media/rc/Kconfig          | 2 ++
 drivers/media/rc/img-ir/Kconfig   | 1 +
 drivers/media/usb/cx231xx/Kconfig | 1 +
 drivers/media/usb/em28xx/Kconfig  | 1 +
 4 files changed, 5 insertions(+)
drivers/media/rc/Kconfig +2 -0
index 2c0ee2e5b446..8a4b4040be45 100644
@@ -92,6 +92,7 @@ config IR_SONY_DECODER
 config IR_SANYO_DECODER
 	tristate "Enable IR raw decoder for the Sanyo protocol"
 	depends on RC_CORE
+	select BITREVERSE
 
 	help
 	   Enable this option if you have an infrared remote control which
@@ -101,6 +102,7 @@ config IR_SANYO_DECODER
 config IR_SHARP_DECODER
 	tristate "Enable IR raw decoder for the Sharp protocol"
 	depends on RC_CORE
+	select BITREVERSE
 
 	help
 	   Enable this option if you have an infrared remote control which
drivers/media/rc/img-ir/Kconfig +1 -0
index 5c0508f2719f..a80cfcd87a95 100644
@@ -30,6 +30,7 @@ config IR_IMG_HW
 config IR_IMG_NEC
 	bool "NEC protocol support"
 	depends on IR_IMG_HW
+	select BITREVERSE
 	help
 	   Say Y here to enable support for the NEC, extended NEC, and 32-bit
 	   NEC protocols in the ImgTec infrared decoder block.
drivers/media/usb/cx231xx/Kconfig +1 -0
index 2fe2b2d335ba..b80661b8375f 100644
@@ -18,6 +18,7 @@ config VIDEO_CX231XX_RC
 	bool "Conexant cx231xx Remote Controller additional support"
 	depends on RC_CORE=y || RC_CORE=VIDEO_CX231XX
 	depends on VIDEO_CX231XX
+	select BITREVERSE
 	default y
 	help
 	  cx231xx hardware has a builtin RX/TX support. However, a few
drivers/media/usb/em28xx/Kconfig +1 -0
index f2031a933e54..8a24731b373a 100644
@@ -77,5 +77,6 @@ config VIDEO_EM28XX_RC
 	depends on VIDEO_EM28XX
 	depends on !(RC_CORE=m && VIDEO_EM28XX=y)
 	default VIDEO_EM28XX
+	select BITREVERSE
 	help
 	  Enables Remote Controller support on em28xx driver.
Signature · 1 line
2.27.0
maintainer Acked-by on v1 1/1
#1 lore raw
Quoted 5 lines · Arnd Bergmann

From: Arnd Bergmann <[email protected]>

A number of remote control drivers require the bitreverse helper, and run into a link error when it is disabled:

Quoted 9 lines

arm-linux-gnueabi-ld: drivers/media/rc/img-ir/img-ir-nec.o: in function `img_ir_nec_scancode':
img-ir-nec.c:(.text+0x10c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/rc/img-ir/img-ir-nec.o: in function `img_ir_nec_filter':
img-ir-nec.c:(.text+0x2dc): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/usb/cx231xx/cx231xx-input.o: in function `get_key_isdbt':
cx231xx-input.c:(.text+0x38c): undefined reference to `byte_rev_table'
arm-linux-gnueabi-ld: drivers/media/usb/em28xx/em28xx-input.o: in function `em28xx_get_key_em_haup':
em28xx-input.c:(.text+0x1704): undefined reference to `byte_rev_table'

Thanks

Sean

Quoted 65 lines
---
 drivers/media/rc/Kconfig          | 2 ++
 drivers/media/rc/img-ir/Kconfig   | 1 +
 drivers/media/usb/cx231xx/Kconfig | 1 +
 drivers/media/usb/em28xx/Kconfig  | 1 +
 4 files changed, 5 insertions(+)
drivers/media/rc/Kconfig +2 -0
index 2c0ee2e5b446..8a4b4040be45 100644
@@ -92,6 +92,7 @@ config IR_SONY_DECODER
 config IR_SANYO_DECODER
 	tristate "Enable IR raw decoder for the Sanyo protocol"
 	depends on RC_CORE
+	select BITREVERSE
 
 	help
 	   Enable this option if you have an infrared remote control which
@@ -101,6 +102,7 @@ config IR_SANYO_DECODER
 config IR_SHARP_DECODER
 	tristate "Enable IR raw decoder for the Sharp protocol"
 	depends on RC_CORE
+	select BITREVERSE
 
 	help
 	   Enable this option if you have an infrared remote control which
drivers/media/rc/img-ir/Kconfig +1 -0
index 5c0508f2719f..a80cfcd87a95 100644
@@ -30,6 +30,7 @@ config IR_IMG_HW
 config IR_IMG_NEC
 	bool "NEC protocol support"
 	depends on IR_IMG_HW
+	select BITREVERSE
 	help
 	   Say Y here to enable support for the NEC, extended NEC, and 32-bit
 	   NEC protocols in the ImgTec infrared decoder block.
drivers/media/usb/cx231xx/Kconfig +1 -0
index 2fe2b2d335ba..b80661b8375f 100644
@@ -18,6 +18,7 @@ config VIDEO_CX231XX_RC
 	bool "Conexant cx231xx Remote Controller additional support"
 	depends on RC_CORE=y || RC_CORE=VIDEO_CX231XX
 	depends on VIDEO_CX231XX
+	select BITREVERSE
 	default y
 	help
 	  cx231xx hardware has a builtin RX/TX support. However, a few
drivers/media/usb/em28xx/Kconfig +1 -0
index f2031a933e54..8a24731b373a 100644
@@ -77,5 +77,6 @@ config VIDEO_EM28XX_RC
 	depends on VIDEO_EM28XX
 	depends on !(RC_CORE=m && VIDEO_EM28XX=y)
 	default VIDEO_EM28XX
+	select BITREVERSE
 	help
 	  Enables Remote Controller support on em28xx driver.
Signature · 1 line
2.27.0