mfd: intel-m10-bmc: add sysfs files for mac_address
Subsystems (2)
v2 cover mfd: intel-m10-bmc: add sysfs files for mac_address
Add two sysfs nodes to the Intel MAX10 BMC driver: mac_address and mac_count. The mac_address provides the first of a series of sequential MAC addresses assigned to the FPGA card. The mac_count indicates how many MAC addresses are assigned to the card.
Changelog v1 -> v2:
- Updated the documentation for the mac_address and mac_count sysfs nodes to clearify their usage.
- Changed sysfs _show() functions to use sysfs_emit() instead of sprintf.
Russ Weight (1):
mfd: intel-m10-bmc: expose mac address and count
.../ABI/testing/sysfs-driver-intel-m10-bmc | 21 +++++++++ drivers/mfd/intel-m10-bmc.c | 43 +++++++++++++++++++ include/linux/mfd/intel-m10-bmc.h | 9 ++++ 3 files changed, 73 insertions(+)
Signature · 1 line
2.25.1
PATCH v2 1/1 mfd: intel-m10-bmc: expose mac address and count
Create two sysfs entries for exposing the MAC address and count from the MAX10 BMC register space. The MAC address is the first in a sequential block of MAC addresses reserved for the FPGA card. The MAC count is the number of MAC addresses in the reserved block.
---
v2:
- Updated the documentation for the mac_address and mac_count sysfs nodes to clearify their usage.
- Changed sysfs _show() functions to use sysfs_emit() instead of sprintf.
--- .../ABI/testing/sysfs-driver-intel-m10-bmc | 21 +++++++++ drivers/mfd/intel-m10-bmc.c | 43 +++++++++++++++++++ include/linux/mfd/intel-m10-bmc.h | 9 ++++ 3 files changed, 73 insertions(+)
Documentation/ABI/testing/sysfs-driver-intel-m10-bmc +21 -0
@@ -13,3 +13,24 @@ Contact: Xu Yilun <[email protected]> Description: Read only. Returns the firmware version of Intel MAX10 BMC chip. Format: "0x%x". + +What: /sys/bus/spi/devices/.../mac_address +Date: December 2020 +KernelVersion: 5.11 +Contact: Russ Weight <[email protected]> +Description: Read only. Returns the first MAC address in a block + of sequential MAC addresses assigned to the board + that is managed by the Intel MAX10 BMC. It is stored in + FLASH storage and is mirrored in the MAX10 BMC register + space. + Format: "%02x:%02x:%02x:%02x:%02x:%02x". + +What: /sys/bus/spi/devices/.../mac_count +Date: December 2020 +KernelVersion: 5.11 +Contact: Russ Weight <[email protected]> +Description: Read only. Returns the number of sequential MAC + addresses assigned to the board managed by the Intel + MAX10 BMC. This value is stored in FLASH and is mirrored + in the MAX10 BMC register space. + Format: "%u".
drivers/mfd/intel-m10-bmc.c +43 -0
52 lines not on this page · raw message
include/linux/mfd/intel-m10-bmc.h +9 -0
@@ -15,6 +15,15 @@/* Register offset of system registers */ #define NIOS2_FW_VERSION 0x0 +#define M10BMC_MACADDR1 0x10 +#define M10BMC_MAC_BYTE4 GENMASK(7, 0) +#define M10BMC_MAC_BYTE3 GENMASK(15, 8) +#define M10BMC_MAC_BYTE2 GENMASK(23, 16) +#define M10BMC_MAC_BYTE1 GENMASK(31, 24) +#define M10BMC_MACADDR2 0x14 +#define M10BMC_MAC_BYTE6 GENMASK(7, 0) +#define M10BMC_MAC_BYTE5 GENMASK(15, 8) +#define M10BMC_MAC_COUNT GENMASK(23, 16)#define M10BMC_TEST_REG 0x3c#define M10BMC_BUILD_VER 0x68#define M10BMC_VER_MAJOR_MSK GENMASK(23, 16)
Signature · 1 line
2.25.1