Skip to contentSkip to conversation

arm64: dts: broadcom: bcm4908: use proper NAND binding

PATCH Applied Rafał Miłecki 2 participants 2 messages Dec 8, 2020 – Dec 11, 2020 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: broadcom: bcm4908: use proper NAND binding

From: Rafał Miłecki <[email protected]>

BCM4908 has controller that needs different IRQ handling just like the BCM63138. Describe it properly.

On Linux this change fixes:
brcmstb_nand ff801800.nand: timeout waiting for command 0x9 brcmstb_nand ff801800.nand: intfc status d0000000

---
 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +1 -1
index f873dc44ce9c..55d9b56ac749 100644
@@ -164,7 +164,7 @@ uart0: serial@640 {
 		nand@1800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
 			reg = <0x1800 0x600>, <0x2000 0x10>;
 			reg-names = "nand", "nand-int-base";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.26.2
#1 lore raw
Quoted 11 lines · Rafał Miłecki

From: Rafał Miłecki <[email protected]>

BCM4908 has controller that needs different IRQ handling just like the BCM63138. Describe it properly.

On Linux this change fixes:
brcmstb_nand ff801800.nand: timeout waiting for command 0x9 brcmstb_nand ff801800.nand: intfc status d0000000

---

Applied to devicetree-arm64/next, thanks!
--
Florian

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel