Skip to contentSkip to conversation

arch: x86: make video init optional (expert)

PATCH New Enrico Weigelt, metux IT consult 1 participant 1 message Dec 15, 2020 x86

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 arch: x86: make video init optional (expert)

As x86 is becoming more widespread in embedded devices, that don't have any video adapter at all, make it possible to opt out from video init on bootup (expert option). Also useful for minimized paravirtualized kernels.

Most users want to leave this enabled and shouldn't touch it, thus defaulting to y and hiding behind CONFIG_EXPERT.

---

changes v2: fixed spelling in commit message and kconfig help text

---
 arch/x86/Kconfig       |  7 +++++++
 arch/x86/boot/Makefile | 10 +++++-----
 arch/x86/boot/main.c   |  2 ++
 3 files changed, 14 insertions(+), 5 deletions(-)
arch/x86/Kconfig +7 -0
index eeb87fce9c6f..8eba95a6bc24 100644
@@ -916,6 +916,13 @@ config DMI
 	  affected by entries in the DMI blacklist. Required by PNP
 	  BIOS code.
 
+config X86_BOOT_VIDEO
+	default y
+	bool "Setup video on boot" if EXPERT
+	help
+	  Enable setting video mode on boot. Say Y here unless your machine
+	  doesn't have any video adapter. (e.g., embedded systems or VMs)
+
 config GART_IOMMU
 	bool "Old AMD GART IOMMU support"
 	select DMA_OPS
arch/x86/boot/Makefile +5 -5
index fe605205b4ce..7f67e1118a99 100644
@@ -34,17 +34,17 @@ subdir-		:= compressed
 
 setup-y		+= a20.o bioscall.o cmdline.o copy.o cpu.o cpuflags.o cpucheck.o
 setup-y		+= early_serial_console.o edd.o header.o main.o memory.o
-setup-y		+= pm.o pmjump.o printf.o regs.o string.o tty.o video.o
-setup-y		+= video-mode.o version.o
+setup-y		+= pm.o pmjump.o printf.o regs.o string.o tty.o version.o
 setup-$(CONFIG_X86_APM_BOOT) += apm.o
+setup-$(CONFIG_X86_BOOT_VIDEO) += video.o video-mode.o
 
 # The link order of the video-*.o modules can matter.  In particular,
 # video-vga.o *must* be listed first, followed by video-vesa.o.
 # Hardware-specific drivers should follow in the order they should be
 # probed, and video-bios.o should typically be last.
-setup-y		+= video-vga.o
-setup-y		+= video-vesa.o
-setup-y		+= video-bios.o
+setup-$(CONFIG_X86_BOOT_VIDEO)	+= video-vga.o
+setup-$(CONFIG_X86_BOOT_VIDEO)	+= video-vesa.o
+setup-$(CONFIG_X86_BOOT_VIDEO)	+= video-bios.o
 
 targets		+= $(setup-y)
 hostprogs	:= tools/build
arch/x86/boot/main.c +2 -0
index e3add857c2c9..61cab92f9a8e 100644
@@ -174,7 +174,9 @@ void main(void)
 #endif
 
 	/* Set the video mode */
+#if defined(CONFIG_X86_BOOT_VIDEO)
 	set_video();
+#endif
 
 	/* Do the last things and invoke protected mode */
 	go_to_protected_mode();
Signature · 1 line
2.11.0