trace-cmd: Updates to the Makefile
cover trace-cmd: Updates to the Makefile
Steven Rostedt (VMware) (12):
trace-cmd: Move do_make_pkgconfig_file to utils.mk
trace-cmd: Have etcdir always be at the root directory
trace-cmd: Remove unused variable LD_SO_CONF_DIR
trace-cmd: Use the LIBTRACE{EVENT,FS}_LIBS for building libtracecmd.so
libtracecmd: Update ld.so.conf.d/trace.conf if needed
libtracecmd: Make installing show a nice INSTALL output
libtracecmd: Build libtracecmd.pc when building the library
libtracecmd: Show building of libtracecmd.pc
libtracecmd: Install libtracecmd.pc when installing libs
trace-cmd: Add make uninstall
trace-cmd: Update libtracecmd.pc if prefix is different
trace-cmd: Keep build_install files around
----
.gitignore | 4 ++++ Makefile | 62 ++++++++++++++++++++++++++++++++++---------------- lib/trace-cmd/Makefile | 39 +++++++++++++++++++++++++++---- lib/trace-cmd/test.c | 7 ++++++ scripts/utils.mk | 21 +++++++++++++++++ 5 files changed, 109 insertions(+), 24 deletions(-) create mode 100644 lib/trace-cmd/test.c
PATCH 1/12 trace-cmd: Move do_make_pkgconfig_file to utils.mk
From: "Steven Rostedt (VMware)" <[email protected]>
The macro do_make_pkgconfig_file should be in utils.mk and not in the top Makefile as utils.mk is where other similar macros are located.
--- Makefile | 8 -------- scripts/utils.mk | 8 ++++++++ 2 files changed, 8 insertions(+), 8 deletions(-)
Makefile +0 -8
@@ -208,14 +208,6 @@ obj := $(objtree) PKG_CONFIG_SOURCE_FILE = libtracecmd.pc PKG_CONFIG_FILE := $(addprefix $(BUILD_OUTPUT)/,$(PKG_CONFIG_SOURCE_FILE)) -define do_make_pkgconfig_file - cp -f $(srctree)/${PKG_CONFIG_SOURCE_FILE}.template ${PKG_CONFIG_FILE}; \ - sed -i "s|INSTALL_PREFIX|${1}|g" ${PKG_CONFIG_FILE}; \ - sed -i "s|LIB_VERSION|${LIBTRACECMD_VERSION}|g" ${PKG_CONFIG_FILE}; \ - sed -i "s|LIB_DIR|$(libdir)|g" ${PKG_CONFIG_FILE}; \ - sed -i "s|HEADER_DIR|$(includedir)/trace-cmd|g" ${PKG_CONFIG_FILE}; -endef - kshark-dir = $(src)/kernel-shark export prefix bindir src obj kshark-dir
scripts/utils.mk +8 -0
@@ -142,3 +142,11 @@ define do_install_pkgconfig_file (echo Failed to locate pkg-config directory) 1>&2; \ fi endef + +define do_make_pkgconfig_file + cp -f $(srctree)/${PKG_CONFIG_SOURCE_FILE}.template ${PKG_CONFIG_FILE}; \ + sed -i "s|INSTALL_PREFIX|${1}|g" ${PKG_CONFIG_FILE}; \ + sed -i "s|LIB_VERSION|${LIBTRACECMD_VERSION}|g" ${PKG_CONFIG_FILE}; \ + sed -i "s|LIB_DIR|$(libdir)|g" ${PKG_CONFIG_FILE}; \ + sed -i "s|HEADER_DIR|$(includedir)/trace-cmd|g" ${PKG_CONFIG_FILE}; +endef
Signature · 1 line
2.29.2
PATCH 2/12 trace-cmd: Have etcdir always be at the root directory
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
There's a test if prefix == /usr/local and if so, then etcdir is set to "/etc", otherwise it is set to $(prefix)/etc, which is not correct.
Always have etcdir = "/etc".
--- Makefile | 4 ---- 1 file changed, 4 deletions(-)
Makefile +0 -4
@@ -72,11 +72,7 @@ includedir_SQ = '$(subst ','\'',$(includedir))' pkgconfig_dir ?= $(word 1,$(shell $(PKG_CONFIG) \ --variable pc_path pkg-config | tr ":" " ")) -ifeq ($(prefix),/usr/local) etcdir ?= /etc -else -etcdir ?= $(prefix)/etc -endif etcdir_SQ = '$(subst ','\'',$(etcdir))' export man_dir man_dir_SQ html_install html_install_SQ INSTALL
Signature · 1 line
2.29.2
PATCH 3/12 trace-cmd: Remove unused variable LD_SO_CONF_DIR
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
The LD_SO_CONF_DIR variable in the Makefile is not used anywhere. Remove it.
--- Makefile | 1 - 1 file changed, 1 deletion(-)
Makefile +0 -1
@@ -114,7 +114,6 @@ HELP_DIR_SQ = '$(subst ','\'',$(HELP_DIR))' #' emacs highlighting gets confused by the above escaped quote. BASH_COMPLETE_DIR ?= $(etcdir)/bash_completion.d -LD_SO_CONF_DIR ?= $(etcdir)/ld.so.conf.d export PLUGIN_DIR_TRACEEVENT export PLUGIN_DIR_TRACECMD
Signature · 1 line
2.29.2
PATCH 4/12 trace-cmd: Use the LIBTRACE{EVENT,FS}_LIBS for building libtracecmd.so
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
Currently the path of the libtraceevent library is hardcoded when building libtracecmd.so, and libtracefs is not even specified. In order to use libtracecmd.so without needing to add -ltraceevent or -ltracefs, use the defined LIBTRACEVENT_LIBS and LIBTRACEFS_LIBS for the LIBS macro to build libtracecmd.so.
--- lib/trace-cmd/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
lib/trace-cmd/Makefile +1 -1
@@ -38,7 +38,7 @@ $(DEPS): | $(bdir) $(LIBTRACECMD_STATIC): $(OBJS) $(Q)$(call do_build_static_lib) -LIBS = -L$(obj)/lib/traceevent -ltraceevent +LIBS = $(LIBTRACEEVENT_LDLAGS) $(LIBTRACEFS_LDLAGS) $(LIBTRACECMD_SHARED_VERSION): $(LIBTRACECMD_SHARED) @ln -sf $(<F) $@
Signature · 1 line
2.29.2
PATCH 5/12 libtracecmd: Update ld.so.conf.d/trace.conf if needed
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
If DESTDIR is not defined (building for the current machine) check if after installing libtracecmd, if it is in the ld.so path by building a test program and running it, and making sure that the dynamic linker works, and if not, then update /etc/ld.so.conf.d/trace.conf to include the path to libtracecmd.so.
--- Makefile | 6 +++++- lib/trace-cmd/Makefile | 26 ++++++++++++++++++++++++++ lib/trace-cmd/test.c | 7 +++++++ 3 files changed, 38 insertions(+), 1 deletion(-) create mode 100644 lib/trace-cmd/test.c
Makefile +5 -1
@@ -37,6 +37,10 @@ endef $(call allow-override,CC,$(CROSS_COMPILE)gcc) $(call allow-override,AR,$(CROSS_COMPILE)ar) $(call allow-override,PKG_CONFIG,pkg-config) +$(call allow-override,LD_SO_CONF_PATH,/etc/ld.so.conf.d/) +$(call allow-override,LDCONFIG,ldconfig) + +export LD_SO_CONF_PATH LDCONFIG EXT = -std=gnu99 INSTALL = install
@@ -76,7 +80,7 @@ etcdir ?= /etc etcdir_SQ = '$(subst ','\'',$(etcdir))' export man_dir man_dir_SQ html_install html_install_SQ INSTALL -export img_install img_install_SQ libdir_SQ includedir_SQ +export img_install img_install_SQ libdir libdir_SQ includedir_SQ export DESTDIR DESTDIR_SQ ifeq ($(prefix),$(HOME))
lib/trace-cmd/Makefile +26 -0
@@ -3,6 +3,7 @@ include $(src)/scripts/utils.mk bdir:=$(obj)/lib/trace-cmd +ldir:=$(src)/lib/trace-cmd DEFAULT_TARGET = $(LIBTRACECMD_STATIC)
@@ -59,11 +60,36 @@ $(DEPS): $(bdir)/.%.d: %.c $(OBJS): $(bdir)/%.o : $(bdir)/.%.d +ifeq ("$(DESTDIR)", "") +# If DESTDIR is not defined, then test if after installing the library +# and running ldconfig, if the library is visible by ld.so. +# If not, add the path to /etc/ld.so.conf.d/trace.conf and run ldconfig again. +define install_ld_config + $(LDCONFIG); \ + if ! grep "^$(libdir)$$" $(LD_SO_CONF_PATH)/* &> /dev/null ; then \ + $(CC) -o $(bdir)/test $(ldir)/test.c -I $(includedir_SQ) \ + -L $(libdir_SQ) -ltracecmd > /dev/null; \ + if ! $(bdir)/test &> /dev/null; then \ + $(call print_install,trace.conf,$(LD_SO_CONF_PATH)) \ + echo $(libdir_SQ) >> $(LD_SO_CONF_PATH)/trace.conf; \ + $(LDCONFIG); \ + fi; \ + $(RM) $(bdir)/test; \ + fi +endef +else +# If installing to a location for another machine or package, do not bother +# with running ldconfig. +define install_ld_config +endef +endif # DESTDIR = "" + install_libs: $(Q)$(call do_install,$(LIBTRACECMD_SHARED),$(libdir_SQ)) cp -fpR $(LIBTRACECMD_SHARED_VERSION) $(DESTDIR)$(libdir_SQ) cp -fpR $(LIBTRACECMD_SHARED_SO) $(DESTDIR)$(libdir_SQ) $(Q)$(call do_install,$(src)/include/trace-cmd/trace-cmd.h,$(includedir_SQ)/trace-cmd) + $(Q)$(call install_ld_config) dep_includes := $(wildcard $(DEPS))
lib/trace-cmd/test.c new file +7 -0
@@ -0,0 +1,7 @@ +#include <trace-cmd/trace-cmd.h> + +int main () +{ +tracecmd_open_head ("trace.dat" ); +return 0 ; +}
Signature · 1 line
2.29.2
PATCH 6/12 libtracecmd: Make installing show a nice INSTALL output
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
Currently, when doing "make install_libs" the output looks like:
INSTALL /tmp/build/lib/trace-cmd/libtracecmd.so.0.0.1 to /usr/local/lib64
cp -fpR /tmp/build/lib/trace-cmd/libtracecmd.so.0 '/usr/local/lib64' cp -fpR /tmp/build/lib/trace-cmd/libtracecmd.so '/usr/local/lib64'
INSTALL /work/git/trace-cmd.git/include/trace-cmd/trace-cmd.h to /usr/local/include/trace-cmd
Have it look like:
INSTALL /tmp/build/lib/trace-cmd/libtracecmd.so.0.0.1 to /usr/local/lib64 INSTALL /tmp/build/lib/trace-cmd/libtracecmd.so.0 to /usr/local/lib64 INSTALL /tmp/build/lib/trace-cmd/libtracecmd.so to /usr/local/lib64 INSTALL /work/git/trace-cmd.git/include/trace-cmd/trace-cmd.h to /usr/local/include/trace-cmd
--- lib/trace-cmd/Makefile | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
lib/trace-cmd/Makefile +4 -2
@@ -86,8 +86,10 @@ endif # DESTDIR = "" install_libs: $(Q)$(call do_install,$(LIBTRACECMD_SHARED),$(libdir_SQ)) - cp -fpR $(LIBTRACECMD_SHARED_VERSION) $(DESTDIR)$(libdir_SQ) - cp -fpR $(LIBTRACECMD_SHARED_SO) $(DESTDIR)$(libdir_SQ) + $(Q)$(call print_install,$(LIBTRACECMD_SHARED_VERSION),$(DESTDIR)$(libdir_SQ)) + $(Q)cp -fpR $(LIBTRACECMD_SHARED_VERSION) $(DESTDIR)$(libdir_SQ) + $(Q)$(call print_install,$(LIBTRACECMD_SHARED_SO),$(DESTDIR)$(libdir_SQ)) + $(Q)cp -fpR $(LIBTRACECMD_SHARED_SO) $(DESTDIR)$(libdir_SQ) $(Q)$(call do_install,$(src)/include/trace-cmd/trace-cmd.h,$(includedir_SQ)/trace-cmd) $(Q)$(call install_ld_config)
Signature · 1 line
2.29.2
PATCH 7/12 libtracecmd: Build libtracecmd.pc when building the library
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
Instead of creating libtracecmd.pc when installing, which will likely leave the file owned by root, create it when building the library.
--- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Makefile +1 -1
@@ -376,7 +376,7 @@ libtracecmd.a: $(LIBTRACECMD_STATIC) libtracecmd.so: $(LIBTRACECMD_SHARED) libtracefs.a: $(LIBTRACEFS_STATIC) -libs: $(LIBTRACECMD_SHARED) $(LIBTRACEEVENT_STATIC_BUILD) $(LIBTRACEFS_STATIC_BUILD) +libs: $(LIBTRACECMD_SHARED) $(LIBTRACEEVENT_STATIC_BUILD) $(LIBTRACEFS_STATIC_BUILD) $(PKG_CONFIG_FILE) test: force $(LIBTRACEEVENT_STATIC_BUILD) $(LIBTRACEFS_STATIC_BUILD) $(LIBTRACECMD_STATIC) ifneq ($(CUNIT_INSTALLED),1)
Signature · 1 line
2.29.2
PATCH 8/12 libtracecmd: Show building of libtracecmd.pc
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
Add printing a nice message "BUILD libtracecmd.pc" when it is being created.
And also add it to the .gitignore file.
--- .gitignore | 1 + scripts/utils.mk | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-)
.gitignore +1 -0
@@ -23,3 +23,4 @@ cscope* traceevent_plugin_dir trace_python_dir tracecmd_plugin_dir +libtracecmd.pc
scripts/utils.mk +2 -1
@@ -144,7 +144,8 @@ define do_install_pkgconfig_file endef define do_make_pkgconfig_file - cp -f $(srctree)/${PKG_CONFIG_SOURCE_FILE}.template ${PKG_CONFIG_FILE}; \ + $(print_app_build) + $(Q)cp -f $(srctree)/${PKG_CONFIG_SOURCE_FILE}.template ${PKG_CONFIG_FILE}; \ sed -i "s|INSTALL_PREFIX|${1}|g" ${PKG_CONFIG_FILE}; \ sed -i "s|LIB_VERSION|${LIBTRACECMD_VERSION}|g" ${PKG_CONFIG_FILE}; \ sed -i "s|LIB_DIR|$(libdir)|g" ${PKG_CONFIG_FILE}; \
Signature · 1 line
2.29.2
PATCH 9/12 libtracecmd: Install libtracecmd.pc when installing libs
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
Instead of installing libtracecmd.pc when doing the install of the executable, install it durin "make install_libs". Also do some clean ups around the building and installin gof libtracecmd.pc.
--- Makefile | 8 +++----- lib/trace-cmd/Makefile | 5 ++++- 2 files changed, 7 insertions(+), 6 deletions(-)
Makefile +3 -5
@@ -207,6 +207,8 @@ obj := $(objtree) PKG_CONFIG_SOURCE_FILE = libtracecmd.pc PKG_CONFIG_FILE := $(addprefix $(BUILD_OUTPUT)/,$(PKG_CONFIG_SOURCE_FILE)) +export pkgconfig_dir PKG_CONFIG_FILE + kshark-dir = $(src)/kernel-shark export prefix bindir src obj kshark-dir
@@ -439,7 +441,7 @@ install_python: force install_bash_completion: force $(Q)$(call do_install_data,$(src)/tracecmd/trace-cmd.bash,$(BASH_COMPLETE_DIR)) -install_cmd: all_cmd install_plugins install_python install_bash_completion install_pkgconfig +install_cmd: all_cmd install_plugins install_python install_bash_completion $(Q)$(call do_install,$(obj)/tracecmd/trace-cmd,$(bindir_SQ)) install: install_cmd
@@ -468,10 +470,6 @@ install_doc: install_doc_gui: $(MAKE) -C $(kshark-dir)/Documentation install -install_pkgconfig: $(PKG_CONFIG_FILE) - $(Q)$(call , $(PKG_CONFIG_FILE)) \ - $(call do_install_pkgconfig_file,$(prefix)) - clean: $(RM) *.o *~ *.a *.so .*.d $(RM) tags TAGS cscope* $(PKG_CONFIG_SOURCE_FILE)
lib/trace-cmd/Makefile +4 -1
@@ -84,7 +84,10 @@ define install_ld_config endef endif # DESTDIR = "" -install_libs: +install_pkgconfig: $(PKG_CONFIG_FILE) + $(Q)$(call do_install_pkgconfig_file,$(prefix)) + +install_libs: install_pkgconfig $(Q)$(call do_install,$(LIBTRACECMD_SHARED),$(libdir_SQ)) $(Q)$(call print_install,$(LIBTRACECMD_SHARED_VERSION),$(DESTDIR)$(libdir_SQ)) $(Q)cp -fpR $(LIBTRACECMD_SHARED_VERSION) $(DESTDIR)$(libdir_SQ)
Signature · 1 line
2.29.2
PATCH 10/12 trace-cmd: Add make uninstall
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
Create the logic to remove the files that would normally be installed.
Note, this does take the DESTDIR and prefix variables into account. Where the uninstall may only work for an install with the same variables.
--- Makefile | 30 ++++++++++++++++++++++++++++++ scripts/utils.mk | 2 ++ 2 files changed, 32 insertions(+)
Makefile +30 -0
@@ -484,6 +484,36 @@ clean: if [ -f $(kshark-dir)/build/Makefile ]; then $(MAKE) -C $(kshark-dir)/build clean; fi cd $(kshark-dir)/build; ./cmake_clean.sh +define build_uninstall_script + $(Q)mkdir $(BUILD_OUTPUT)/tmp_build + $(Q)$(MAKE) -C $(src) DESTDIR=$(BUILD_OUTPUT)/tmp_build O=$(BUILD_OUTPUT) $1 > /dev/null + $(Q)find $(BUILD_OUTPUT)/tmp_build ! -type d -printf "%P\n" > $(BUILD_OUTPUT)/build_$2 + $(Q)$(RM) -rf $(BUILD_OUTPUT)/tmp_build +endef + +build_uninstall: + $(call build_uninstall_script,install,uninstall) + +$(BUILD_OUTPUT)/build_uninstall: build_uninstall + +build_libs_uninstall: + $(call build_uninstall_script,install_libs,libs_uninstall) + +$(BUILD_OUTPUT)/build_libs_uninstall: build_libs_uninstall + +define uninstall_file + if [ -f $(DESTDIR)/$1 -o -h $(DESTDIR)/$1 ]; then \ + $(call print_uninstall,$(DESTDIR)/$1)$(RM) $(DESTDIR)/$1; \ + fi; +endef + +uninstall: $(BUILD_OUTPUT)/build_uninstall + @$(foreach file,$(shell cat $(BUILD_OUTPUT)/build_uninstall),$(call uninstall_file,$(file))) + $(Q)$(RM) $< + +uninstall_libs: $(BUILD_OUTPUT)/build_libs_uninstall + @$(foreach file,$(shell cat $(BUILD_OUTPUT)/build_libs_uninstall),$(call uninstall_file,$(file))) + $(Q)$(RM) $< ##### PYTHON STUFF #####
scripts/utils.mk +2 -0
@@ -30,6 +30,7 @@ ifeq ($(findstring 1,$(SILENT)$(VERBOSE)),1) print_plugin_obj_compile = print_plugin_build = print_install = + print_uninstall = print_update = else print_compile = echo ' $(GUI)COMPILE '$(GOBJ);
@@ -41,6 +42,7 @@ else print_static_lib_build = echo ' $(GUI)BUILD STATIC LIB '$(GOBJ); print_install = echo ' $(GUI)INSTALL '$(GSPACE)$1' to $(DESTDIR_SQ)$2'; print_update = echo ' $(GUI)UPDATE '$(GOBJ); + print_uninstall = echo ' $(GUI)UNINSTALLING $(DESTDIR_SQ)$1'; endif do_fpic_compile = \
Signature · 1 line
2.29.2
PATCH 11/12 trace-cmd: Update libtracecmd.pc if prefix is different
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
If a build is done with different DESTDIR and the prefix is changed, the the libtracecmd.pc is not updated with the new prefix, and the one used may not work with the installation being performed.
Add a "build_prefix" dependency, that creates a file "build_prefix" that has the last prefix used to build the library. And if a new prefix is used, then that file gets updated and so does libtracecmd.pc.
--- .gitignore | 1 + Makefile | 7 ++++++- scripts/utils.mk | 10 ++++++++++ 3 files changed, 17 insertions(+), 1 deletion(-)
.gitignore +1 -0
@@ -24,3 +24,4 @@ traceevent_plugin_dir trace_python_dir tracecmd_plugin_dir libtracecmd.pc +build_prefix
Makefile +6 -1
@@ -343,7 +343,12 @@ CMAKE_COMMAND = /usr/bin/cmake # Build with "BUILD_TYPE=Release" to remove cmake debug info BUILD_TYPE ?= RelWithDebInfo -$(PKG_CONFIG_FILE) : ${PKG_CONFIG_SOURCE_FILE}.template +BUILD_PREFIX := $(BUILD_OUTPUT)/build_prefix + +$(BUILD_PREFIX): force + $(Q)$(call build_prefix,$(prefix)) + +$(PKG_CONFIG_FILE) : ${PKG_CONFIG_SOURCE_FILE}.template $(BUILD_PREFIX) $(Q) $(call do_make_pkgconfig_file,$(prefix)) $(kshark-dir)/build/Makefile: $(kshark-dir)/CMakeLists.txt
scripts/utils.mk +10 -0
@@ -121,6 +121,16 @@ define update_dir fi); endef +define build_prefix + (echo $1 > [email protected]; \ + if [ -r $@ ] && cmp -s $@ [email protected]; then \ + rm -f [email protected]; \ + else \ + $(print_update) \ + mv -f [email protected] $@; \ + fi); +endef + define do_install $(print_install) \ if [ ! -d '$(DESTDIR_SQ)$2' ]; then \
Signature · 1 line
2.29.2
PATCH 12/12 trace-cmd: Keep build_install files around
In reply to Steven RostedtFrom: "Steven Rostedt (VMware)" <[email protected]>
Instead of rebuilding the build_install and build_libs_install files every time the uninstall is created, make it depend on the prefix, as if the prefix is the same, then the uninstall should be the same.
--- .gitignore | 2 ++ Makefile | 6 ++---- 2 files changed, 4 insertions(+), 4 deletions(-)
.gitignore +2 -0
@@ -25,3 +25,5 @@ trace_python_dir tracecmd_plugin_dir libtracecmd.pc build_prefix +build_install +build_libs_install
Makefile +2 -4
@@ -496,12 +496,12 @@ define build_uninstall_script $(Q)$(RM) -rf $(BUILD_OUTPUT)/tmp_build endef -build_uninstall: +build_uninstall: $(BUILD_PREFIX) $(call build_uninstall_script,install,uninstall) $(BUILD_OUTPUT)/build_uninstall: build_uninstall -build_libs_uninstall: +build_libs_uninstall: $(BUILD_PREFIX) $(call build_uninstall_script,install_libs,libs_uninstall) $(BUILD_OUTPUT)/build_libs_uninstall: build_libs_uninstall
@@ -514,11 +514,9 @@ endef uninstall: $(BUILD_OUTPUT)/build_uninstall @$(foreach file,$(shell cat $(BUILD_OUTPUT)/build_uninstall),$(call uninstall_file,$(file))) - $(Q)$(RM) $< uninstall_libs: $(BUILD_OUTPUT)/build_libs_uninstall @$(foreach file,$(shell cat $(BUILD_OUTPUT)/build_libs_uninstall),$(call uninstall_file,$(file))) - $(Q)$(RM) $< ##### PYTHON STUFF #####
Signature · 1 line
2.29.2