board: amlogic: add Beelink GT-King/Pro support
Subsystems (2)
cover board: amlogic: add Beelink GT-King/Pro support
This patchset adds support for the Beelink GT-King and GT-King Pro boxes based on the Amlogic S922X (G12B/W400) SoC. Patches are based on the u-boot-amlogic-next branch in the custodians tree.
Christian Hewitt (5):
ARM: dts: import Beelink GT-King/Pro DTs from Linux 5.10
boards: amlogic: add Beelink S922X board family support
boards: amlogic: add Beelink GT-King defconfig
boards: amlogic: add Beelink GT-King Pro defconfig
boards: amlogic: update documentation for Beelink GT-King/Pro
arch/arm/dts/Makefile | 2 + arch/arm/dts/meson-g12b-gtking-pro.dts | 125 ++++++ arch/arm/dts/meson-g12b-gtking.dts | 145 +++++++ arch/arm/dts/meson-g12b-w400.dtsi | 425 ++++++++++++++++++++ board/amlogic/beelink-s922x/MAINTAINERS | 9 + board/amlogic/beelink-s922x/Makefile | 6 + board/amlogic/beelink-s922x/beelink-s922x.c | 54 +++ configs/beelink-gtking_defconfig | 71 ++++ configs/beelink-gtkingpro_defconfig | 71 ++++ doc/board/amlogic/beelink-gtking.rst | 115 ++++++ doc/board/amlogic/beelink-gtkingpro.rst | 116 ++++++ doc/board/amlogic/index.rst | 4 +- 12 files changed, 1142 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/meson-g12b-gtking-pro.dts create mode 100644 arch/arm/dts/meson-g12b-gtking.dts create mode 100644 arch/arm/dts/meson-g12b-w400.dtsi create mode 100644 board/amlogic/beelink-s922x/MAINTAINERS create mode 100644 board/amlogic/beelink-s922x/Makefile create mode 100644 board/amlogic/beelink-s922x/beelink-s922x.c create mode 100644 configs/beelink-gtking_defconfig create mode 100644 configs/beelink-gtkingpro_defconfig create mode 100644 doc/board/amlogic/beelink-gtking.rst create mode 100644 doc/board/amlogic/beelink-gtkingpro.rst
Signature · 1 line
2.17.1
PATCH 1/5 ARM: dts: import Beelink GT-King/Pro DTs from Linux 5.10
Import the Beelink GT-King/Pro and supporting meson-g12b-w400.dtsi file from Linux 5.10.
--- arch/arm/dts/Makefile | 2 + arch/arm/dts/meson-g12b-gtking-pro.dts | 125 ++++++++ arch/arm/dts/meson-g12b-gtking.dts | 145 +++++++++ arch/arm/dts/meson-g12b-w400.dtsi | 425 +++++++++++++++++++++++++ 4 files changed, 697 insertions(+) create mode 100644 arch/arm/dts/meson-g12b-gtking-pro.dts create mode 100644 arch/arm/dts/meson-g12b-gtking.dts create mode 100644 arch/arm/dts/meson-g12b-w400.dtsi
arch/arm/dts/Makefile +2 -0
@@ -170,6 +170,8 @@ dtb-$(CONFIG_ARCH_MESON) += \ meson-axg-s400.dtb \ meson-g12a-u200.dtb \ meson-g12a-sei510.dtb \ + meson-g12b-gtking.dtb \ + meson-g12b-gtking-pro.dtb \ meson-g12b-odroid-n2.dtb \ meson-g12b-odroid-n2-plus.dtb \ meson-g12b-a311d-khadas-vim3.dtb \
arch/arm/dts/meson-g12b-gtking-pro.dts new file +125 -0
125 lines not on this page · raw message
arch/arm/dts/meson-g12b-gtking.dts new file +145 -0
145 lines not on this page · raw message
arch/arm/dts/meson-g12b-w400.dtsi new file +425 -0
425 lines not on this page · raw message
Signature · 1 line
2.17.1
Re: [PATCH 1/5] ARM: dts: import Beelink GT-King/Pro DTs from Linux 5.10
Quoted 731 lines · Christian Hewitt
Import the Beelink GT-King/Pro and supporting
meson-g12b-w400.dtsifile from Linux 5.10.Signed-off-by Christian Hewitt <[email protected]>--- arch/arm/dts/Makefile | 2 + arch/arm/dts/meson-g12b-gtking-pro.dts | 125 ++++++++ arch/arm/dts/meson-g12b-gtking.dts | 145 +++++++++ arch/arm/dts/meson-g12b-w400.dtsi | 425 +++++++++++++++++++++++++ 4 files changed, 697 insertions(+) create mode 100644 arch/arm/dts/meson-g12b-gtking-pro.dts create mode 100644 arch/arm/dts/meson-g12b-gtking.dts create mode 100644 arch/arm/dts/meson-g12b-w400.dtsiarch/arm/dts/Makefile +2
-0@@ -170,6 +170,8 @@ dtb-$(CONFIG_ARCH_MESON) += \ meson-axg-s400.dtb \ meson-g12a-u200.dtb \ meson-g12a-sei510.dtb \ + meson-g12b-gtking.dtb \ + meson-g12b-gtking-pro.dtb \ meson-g12b-odroid-n2.dtb \ meson-g12b-odroid-n2-plus.dtb \ meson-g12b-a311d-khadas-vim3.dtb \arch/arm/dts/meson-g12b-gtking-pro.dts new file +125
-0@@ -0,0 +1,125 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <[email protected]> + * Copyright (c) 2019 Christian Hewitt <[email protected]> + */ + +/dts-v1/; + +#include "meson-g12b-w400.dtsi" +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "azw,gtking", "amlogic,g12b"; + model = "Beelink GT-King Pro"; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + power-button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + + white { + label = "power:white"; + gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12B-GTKING-PRO"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +};arch/arm/dts/meson-g12b-gtking.dts new file +145
-0@@ -0,0 +1,145 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <[email protected]> + * Copyright (c) 2019 Christian Hewitt <[email protected]> + */ + +/dts-v1/; + +#include "meson-g12b-w400.dtsi" +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "azw,gtking", "amlogic,g12b"; + model = "Beelink GT-King"; + + spdif_dit: audio-codec-1 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12B-GTKING"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "SPDIFOUT IN 0", "FRDDR_A OUT 3", + "SPDIFOUT IN 1", "FRDDR_B OUT 3", + "SPDIFOUT IN 2", "FRDDR_C OUT 3"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* spdif hdmi or toslink interface */ + dai-link-4 { + sound-dai = <&spdifout>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; + }; + }; + + /* spdif hdmi interface */ + dai-link-5 { + sound-dai = <&spdifout_b>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-6 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&spdifout { + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spdifout_b { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +};arch/arm/dts/meson-g12b-w400.dtsi new file +415
-0@@ -0,0 +1,425 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <[email protected]> + * Copyright (c) 2019 Christian Hewitt <[email protected]> + */ + +/dts-v1/; + +#include "meson-g12b.dtsi" +#include "meson-g12b-s922x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory at 0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddcpu_a: regulator-vddcpu-a { + /* + * MP1653 Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * MP1652 Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + usb1_pow: regulator-usb1-pow { + compatible = "regulator-fixed"; + regulator-name = "USB1_POW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* connected to SY6280A Power Switch */ + gpio = <&gpio GPIOA_8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_pwr_en: regulator-usb-pwr-en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to USB3 Type-A Port power enable */ + gpio = <&gpio GPIOAO_7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&ext_mdio { + external_phy: ethernet-phy at 0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi at 1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <100000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "host";
arch/arm/dts/meson-g12b-w400.dtsi line 425
Quoted 10 lines
arch/arm/dts/meson-g12b-w400.dtsi new file +10
-0+ vbus-supply = <&usb_pwr_en>; +}; + +&usb2_phy0 { + phy-supply = <&usb1_pow>; +}; + +&usb2_phy1 { + phy-supply = <&usb1_pow>; +};
PATCH 2/5 boards: amlogic: add Beelink S922X board family support
In reply to Christian HewittCopied from Odroid N2. Add myself as maintainer.
--- board/amlogic/beelink-s922x/MAINTAINERS | 9 ++++ board/amlogic/beelink-s922x/Makefile | 6 +++ board/amlogic/beelink-s922x/beelink-s922x.c | 54 +++++++++++++++++++++ 3 files changed, 69 insertions(+) create mode 100644 board/amlogic/beelink-s922x/MAINTAINERS create mode 100644 board/amlogic/beelink-s922x/Makefile create mode 100644 board/amlogic/beelink-s922x/beelink-s922x.c
board/amlogic/beelink-s922x/MAINTAINERS new file +9 -0
@@ -0,0 +1,9 @@ +BEELINK-S922X +M: Christian Hewitt <[email protected]> +S: Maintained +L: u-boot-amlogic at groups.io +F: board/amlogic/beelink-s922x/ +F: configs/beelink-gtking_defconfig +F: configs/beelink-gtkingpro_defconfig +F: doc/board/amlogic/beelink-gtking.rst +F: doc/board/amlogic/beelink-gtkingpro.rst
board/amlogic/beelink-s922x/Makefile new file +6 -0
@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2020 BayLibre, SAS +# Author: Neil Armstrong <[email protected]> + +obj-y := beelink-s922x.o
board/amlogic/beelink-s922x/beelink-s922x.c new file +54 -0
54 lines not on this page · raw message
Signature · 1 line
2.17.1
Re: [PATCH 2/5] boards: amlogic: add Beelink S922X board family support
Quoted 90 lines · Christian Hewitt
Copied from Odroid N2. Add myself as maintainer.
Signed-off-by Christian Hewitt <[email protected]>--- board/amlogic/beelink-s922x/MAINTAINERS | 9 ++++ board/amlogic/beelink-s922x/Makefile | 6 +++ board/amlogic/beelink-s922x/beelink-s922x.c | 54 +++++++++++++++++++++ 3 files changed, 69 insertions(+) create mode 100644 board/amlogic/beelink-s922x/MAINTAINERS create mode 100644 board/amlogic/beelink-s922x/Makefile create mode 100644 board/amlogic/beelink-s922x/beelink-s922x.cboard/amlogic/beelink-s922x/MAINTAINERS new file +9
-0@@ -0,0 +1,9 @@ +BEELINK-S922X +M: Christian Hewitt <[email protected]> +S: Maintained +L: u-boot-amlogic at groups.io +F: board/amlogic/beelink-s922x/ +F: configs/beelink-gtking_defconfig +F: configs/beelink-gtkingpro_defconfig +F: doc/board/amlogic/beelink-gtking.rst +F: doc/board/amlogic/beelink-gtkingpro.rstboard/amlogic/beelink-s922x/Makefile new file +6
-0@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2020 BayLibre, SAS +# Author: Neil Armstrong <[email protected]> + +obj-y := beelink-s922x.oboard/amlogic/beelink-s922x/beelink-s922x.c new file +44
-0@@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2020 BayLibre, SAS +* Author: Neil Armstrong <[email protected]> +*/ + +#include <common.h> +#include <dm.h> +#include <env.h> +#include <init.h> +#include <net.h> +#include <asm/io.h> +#include <asm/arch/sm.h> +#include <asm/arch/eth.h> +#include <asm/arch/boot.h> + +#define EFUSE_MAC_OFFSET 20 +#define EFUSE_MAC_SIZE 12 +#define MAC_ADDR_LEN 6 + +int misc_init_r (void ) +{ +u8 mac_addr[MAC_ADDR_LEN ]; +char efuse_mac_addr[EFUSE_MAC_SIZE ], tmp[3 ]; +ssize_t len; + +if (IS_ENABLED (CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG ) && +meson_get_soc_rev (tmp,sizeof (tmp)) >0 ) +env_set ("soc_rev" , tmp); + +meson_eth_init (PHY_INTERFACE_MODE_RGMII ,0 ); + +if (!eth_env_get_enetaddr ("ethaddr" , mac_addr)) { + len =meson_sm_read_efuse (EFUSE_MAC_OFFSET , + efuse_mac_addr,EFUSE_MAC_SIZE ); +if (len !=EFUSE_MAC_SIZE ) +return 0 ; + +/* MAC is stored in ASCII format, 1bytes = 2characters */ +for (int i =0 ; i <6 ; i++) { + tmp[0 ] = efuse_mac_addr[i *2 ]; + tmp[1 ] = efuse_mac_addr[i *2 +1 ]; + tmp[2 ] ='\0' ; + mac_addr[i] =simple_strtoul (tmp,NULL ,16 );
board/amlogic/beelink-s922x/beelink-s922x.c line 54
Quoted 10 lines
board/amlogic/beelink-s922x/beelink-s922x.c new file +10
-0+ } + +if (is_valid_ethaddr (mac_addr)) +eth_env_set_enetaddr ("ethaddr" , mac_addr); +else +meson_generate_serial_ethaddr (); + } + +return 0 ; +}
PATCH 3/5 boards: amlogic: add Beelink GT-King defconfig
In reply to Christian HewittAdd a defconfig for the Beelink GT-King Android STB, which is based on the Amlogic W400 reference design.
--- configs/beelink-gtking_defconfig | 71 ++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 configs/beelink-gtking_defconfig
configs/beelink-gtking_defconfig new file +71 -0
@@ -0,0 +1,71 @@ +CONFIG_ARM=y +CONFIG_SYS_BOARD="beelink-s922x" +CONFIG_ARCH_MESON=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x2000 +CONFIG_DM_GPIO=y +CONFIG_MESON_G12A=y +CONFIG_DEBUG_UART_BASE=0xff803000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_IDENT_STRING=" beelink" +CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-gtking" +CONFIG_DEBUG_UART=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_MMC=y +CONFIG_MMC_MESON_GX=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_MESON_G12A_USB_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_G12A=y +CONFIG_POWER_DOMAIN=y +CONFIG_MESON_EE_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_MESON_G12A=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_DM_VIDEO=y +# CONFIG_VIDEO_BPP8 is not set +# CONFIG_VIDEO_BPP16 is not set +CONFIG_SYS_WHITE_ON_BLACK=y +CONFIG_VIDEO_MESON=y +CONFIG_VIDEO_DT_SIMPLEFB=y +CONFIG_SPLASH_SCREEN=y +CONFIG_SPLASH_SCREEN_ALIGN=y +CONFIG_OF_LIBFDT_OVERLAY=y
Signature · 1 line
2.17.1
Re: [PATCH 3/5] boards: amlogic: add Beelink GT-King defconfig
Quoted 77 lines · Christian Hewitt
Add a defconfig for the Beelink GT-King Android STB, which is based on the Amlogic W400 reference design.
Signed-off-by Christian Hewitt <[email protected]>--- configs/beelink-gtking_defconfig | 71 ++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 configs/beelink-gtking_defconfigconfigs/beelink-gtking_defconfig new file +61
-0@@ -0,0 +1,71 @@ +CONFIG_ARM=y +CONFIG_SYS_BOARD="beelink-s922x" +CONFIG_ARCH_MESON=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x2000 +CONFIG_DM_GPIO=y +CONFIG_MESON_G12A=y +CONFIG_DEBUG_UART_BASE=0xff803000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_IDENT_STRING=" beelink" +CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-gtking" +CONFIG_DEBUG_UART=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_MMC=y +CONFIG_MMC_MESON_GX=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_MESON_G12A_USB_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_G12A=y +CONFIG_POWER_DOMAIN=y +CONFIG_MESON_EE_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_MESON_G12A=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
configs/beelink-gtking_defconfig line 71
Quoted 10 lines
configs/beelink-gtking_defconfig new file +10
-0+CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_DM_VIDEO=y +# CONFIG_VIDEO_BPP8 is not set +# CONFIG_VIDEO_BPP16 is not set +CONFIG_SYS_WHITE_ON_BLACK=y +CONFIG_VIDEO_MESON=y +CONFIG_VIDEO_DT_SIMPLEFB=y +CONFIG_SPLASH_SCREEN=y +CONFIG_SPLASH_SCREEN_ALIGN=y +CONFIG_OF_LIBFDT_OVERLAY=y
PATCH 4/5 boards: amlogic: add Beelink GT-King Pro defconfig
In reply to Christian HewittAdd a defconfig for the Beelink GT-King Pro Android STB, which is based on the Amlogic W400 reference design.
--- configs/beelink-gtkingpro_defconfig | 71 +++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 configs/beelink-gtkingpro_defconfig
configs/beelink-gtkingpro_defconfig new file +71 -0
@@ -0,0 +1,71 @@ +CONFIG_ARM=y +CONFIG_SYS_BOARD="beelink-s922x" +CONFIG_ARCH_MESON=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x2000 +CONFIG_DM_GPIO=y +CONFIG_MESON_G12A=y +CONFIG_DEBUG_UART_BASE=0xff803000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_IDENT_STRING=" beelink" +CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-gtking-pro" +CONFIG_DEBUG_UART=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_MMC=y +CONFIG_MMC_MESON_GX=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_MESON_G12A_USB_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_G12A=y +CONFIG_POWER_DOMAIN=y +CONFIG_MESON_EE_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_MESON_G12A=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_DM_VIDEO=y +# CONFIG_VIDEO_BPP8 is not set +# CONFIG_VIDEO_BPP16 is not set +CONFIG_SYS_WHITE_ON_BLACK=y +CONFIG_VIDEO_MESON=y +CONFIG_VIDEO_DT_SIMPLEFB=y +CONFIG_SPLASH_SCREEN=y +CONFIG_SPLASH_SCREEN_ALIGN=y +CONFIG_OF_LIBFDT_OVERLAY=y
Signature · 1 line
2.17.1
Re: [PATCH 4/5] boards: amlogic: add Beelink GT-King Pro defconfig
Quoted 77 lines · Christian Hewitt
Add a defconfig for the Beelink GT-King Pro Android STB, which is based on the Amlogic W400 reference design.
Signed-off-by Christian Hewitt <[email protected]>--- configs/beelink-gtkingpro_defconfig | 71 +++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 configs/beelink-gtkingpro_defconfigconfigs/beelink-gtkingpro_defconfig new file +61
-0@@ -0,0 +1,71 @@ +CONFIG_ARM=y +CONFIG_SYS_BOARD="beelink-s922x" +CONFIG_ARCH_MESON=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x2000 +CONFIG_DM_GPIO=y +CONFIG_MESON_G12A=y +CONFIG_DEBUG_UART_BASE=0xff803000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_IDENT_STRING=" beelink" +CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-gtking-pro" +CONFIG_DEBUG_UART=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_MMC=y +CONFIG_MMC_MESON_GX=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_MESON_G12A_USB_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_G12A=y +CONFIG_POWER_DOMAIN=y +CONFIG_MESON_EE_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_MESON_G12A=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
configs/beelink-gtkingpro_defconfig line 71
Quoted 10 lines
configs/beelink-gtkingpro_defconfig new file +10
-0+CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_DM_VIDEO=y +# CONFIG_VIDEO_BPP8 is not set +# CONFIG_VIDEO_BPP16 is not set +CONFIG_SYS_WHITE_ON_BLACK=y +CONFIG_VIDEO_MESON=y +CONFIG_VIDEO_DT_SIMPLEFB=y +CONFIG_SPLASH_SCREEN=y +CONFIG_SPLASH_SCREEN_ALIGN=y +CONFIG_OF_LIBFDT_OVERLAY=y
PATCH 5/5 boards: amlogic: update documentation for Beelink GT-King/Pro
In reply to Christian HewittUpdate the device matrix and add build instructions.
--- doc/board/amlogic/beelink-gtking.rst | 115 +++++++++++++++++++++++ doc/board/amlogic/beelink-gtkingpro.rst | 116 ++++++++++++++++++++++++ doc/board/amlogic/index.rst | 4 +- 3 files changed, 234 insertions(+), 1 deletion(-) create mode 100644 doc/board/amlogic/beelink-gtking.rst create mode 100644 doc/board/amlogic/beelink-gtkingpro.rst
doc/board/amlogic/beelink-gtking.rst new file +115 -0
@@ -0,0 +1,115 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Beelink GT-King +========================== + +The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference +board with an S922X-H chip. + +- 4GB LPDDR4 RAM +- 64GB eMMC storage +- 10/100/1000 Base-T Ethernet +- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) +- HDMI 2.1 video +- S/PDIF optical output +- Analogue audio output +- 1x USB 2.0 port +- 2x USB 3.0 ports +- IR receiver +- 1x micro SD card slot + +Beelink do not provide public schematics, but have been willing +to share them with known distro developers on request. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make beelink-gtking_defconfig + $ make + +Image creation +-------------- + +Amlogic does not provide sources for the firmware and for tools needed +to create the bootloader image. Beelink have provided the Amlogic "SDK" +in their forums, but the u-boot sources included result in 2GB RAM being +detected. The following FIPs were generated with newer private sources +and give correct (4GB) RAM detection: + +https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x + +NB: Beelink use a common board config for GT-King, GT-King Pro and the +GS-King-X model, hence the "beelink-s922x" name. + +.. code-block:: bash + + $ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip + $ unzip master.zip + $ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x + +Go back to the mainline U-Boot source tree then: + +.. code-block:: bash + + $ mkdir fip + $ cp $FIPDIR/* fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + $ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ fip/aml_encrypt_g12b --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --level v3 + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
doc/board/amlogic/beelink-gtkingpro.rst new file +116 -0
116 lines not on this page · raw message
doc/board/amlogic/index.rst +3 -1
@@ -17,7 +17,7 @@ This matrix concerns the actual source code version. +===============================+===========+=================+==============+============+============+=============+==============+ | Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 | | | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L | -| | P200 | LibreTech-CC v1 | WeTek Core2 | | | | Odroid-C4 | +| | P200 | LibreTech-CC v1 | WeTek Core2 | | | GT-King/Pro | Odroid-C4 | | | P201 | LibreTech-AC v2 | | | | | | +-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+ | UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
@@ -77,6 +77,8 @@ Board Documentation .. toctree:: :maxdepth: 1 + beelink-gtking + beelink-gtkingpro khadas-vim2 khadas-vim3l khadas-vim3
Signature · 1 line
2.17.1
Re: [PATCH 5/5] boards: amlogic: update documentation for Beelink GT-King/Pro
Quoted 269 lines · Christian Hewitt
Update the device matrix and add build instructions.
Signed-off-by Christian Hewitt <[email protected]>--- doc/board/amlogic/beelink-gtking.rst | 115 +++++++++++++++++++++++ doc/board/amlogic/beelink-gtkingpro.rst | 116 ++++++++++++++++++++++++ doc/board/amlogic/index.rst | 4 +- 3 files changed, 234 insertions(+), 1 deletion(-) create mode 100644 doc/board/amlogic/beelink-gtking.rst create mode 100644 doc/board/amlogic/beelink-gtkingpro.rstdoc/board/amlogic/beelink-gtking.rst new file +115
-0@@ -0,0 +1,115 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Beelink GT-King +========================== + +The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference +board with an S922X-H chip. + +- 4GB LPDDR4 RAM +- 64GB eMMC storage +- 10/100/1000 Base-T Ethernet +- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) +- HDMI 2.1 video +- S/PDIF optical output +- Analogue audio output +- 1x USB 2.0 port +- 2x USB 3.0 ports +- IR receiver +- 1x micro SD card slot + +Beelink do not provide public schematics, but have been willing +to share them with known distro developers on request. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make beelink-gtking_defconfig + $ make + +Image creation +-------------- + +Amlogic does not provide sources for the firmware and for tools needed +to create the bootloader image. Beelink have provided the Amlogic "SDK" +in their forums, but the u-boot sources included result in 2GB RAM being +detected. The following FIPs were generated with newer private sources +and give correct (4GB) RAM detection: + +https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x + +NB: Beelink use a common board config for GT-King, GT-King Pro and the +GS-King-X model, hence the "beelink-s922x" name. + +.. code-block:: bash + + $ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip + $ unzip master.zip + $ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x + +Go back to the mainline U-Boot source tree then: + +.. code-block:: bash + + $ mkdir fip + $ cp $FIPDIR/* fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + $ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ fip/aml_encrypt_g12b --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --level v3 + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444doc/board/amlogic/beelink-gtkingpro.rst new file +116
-0@@ -0,0 +1,116 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for Beelink GT-King Pro +============================== + +The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference +board with an S922X-H chip. + +- 4GB LPDDR4 RAM +- 64GB eMMC storage +- 10/100/1000 Base-T Ethernet +- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) +- HDMI 2.1 video +- Analogue audio output +- 1x RS232 port +- 2x USB 2.0 port +- 2x USB 3.0 ports +- IR receiver +- 1x SD card slot +- 1x Power on/off button + +Beelink do not provide public schematics, but have been willing +to share them with known distro developers on request. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make beelink-gtkingpro_defconfig + $ make + +Image creation +-------------- + +Amlogic does not provide sources for the firmware and for tools needed +to create the bootloader image. Beelink have provided the Amlogic "SDK" +in their forums, but the u-boot sources included result in 2GB RAM being +detected. The following FIPs were generated with newer private sources +and give correct (4GB) RAM detection: + +https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x + +NB: Beelink use a common board config for GT-King, GT-King Pro and the +GS-King-X model, hence the "beelink-s922x" name. + +.. code-block:: bash + + $ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip + $ unzip master.zip + $ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x + +Go back to the mainline U-Boot source tree then: + +.. code-block:: bash + + $ mkdir fip + $ cp $FIPDIR/* fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + $ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ fip/aml_encrypt_g12b --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --level v3 + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444doc/board/amlogic/index.rst +1
-1@@ -17,7 +17,7 @@ This matrix concerns the actual source code version. +===============================+===========+=================+==============+============+============+=============+==============+ | Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 | | | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L | -| | P200 | LibreTech-CC v1 | WeTek Core2 | | | | Odroid-C4 | +| | P200 | LibreTech-CC v1 | WeTek Core2 | | | GT-King/Pro | Odroid-C4 | | | P201 | LibreTech-AC v2 | | | | | | +-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+ | UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** |
doc/board/amlogic/index.rst Board Documentation · line 84
Quoted 8 lines
doc/board/amlogic/index.rst +2
-0@@ -77,6 +77,8 @@ Board Documentation .. toctree:: :maxdepth: 1 + beelink-gtking + beelink-gtkingpro khadas-vim2 khadas-vim3l khadas-vim3
Quoted 26 lines · Christian Hewitt
This patchset adds support for the Beelink GT-King and GT-King Pro boxes based on the Amlogic S922X (G12B/W400) SoC. Patches are based on the u-boot-amlogic-next branch in the custodians tree.
Christian Hewitt (5):
ARM: dts: import Beelink GT-King/Pro DTs from Linux 5.10
boards: amlogic: add Beelink S922X board family support
boards: amlogic: add Beelink GT-King defconfig
boards: amlogic: add Beelink GT-King Pro defconfig
boards: amlogic: update documentation for Beelink GT-King/Proarch/arm/dts/Makefile | 2 + arch/arm/dts/meson-g12b-gtking-pro.dts | 125 ++++++ arch/arm/dts/meson-g12b-gtking.dts | 145 +++++++ arch/arm/dts/meson-g12b-w400.dtsi | 425 ++++++++++++++++++++ board/amlogic/beelink-s922x/MAINTAINERS | 9 + board/amlogic/beelink-s922x/Makefile | 6 + board/amlogic/beelink-s922x/beelink-s922x.c | 54 +++ configs/beelink-gtking_defconfig | 71 ++++ configs/beelink-gtkingpro_defconfig | 71 ++++ doc/board/amlogic/beelink-gtking.rst | 115 ++++++ doc/board/amlogic/beelink-gtkingpro.rst | 116 ++++++ doc/board/amlogic/index.rst | 4 +- 12 files changed, 1142 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/meson-g12b-gtking-pro.dts create mode 100644 arch/arm/dts/meson-g12b-gtking.dts
Quoted 9 lines
create mode 100644 arch/arm/dts/meson-g12b-w400.dtsi create mode 100644 board/amlogic/beelink-s922x/MAINTAINERS create mode 100644 board/amlogic/beelink-s922x/Makefile create mode 100644 board/amlogic/beelink-s922x/beelink-s922x.c create mode 100644 configs/beelink-gtking_defconfig create mode 100644 configs/beelink-gtkingpro_defconfig create mode 100644 doc/board/amlogic/beelink-gtking.rst create mode 100644 doc/board/amlogic/beelink-gtkingpro.rst
Applying to u-boot-amlogic-next