Skip to contentSkip to conversation

PSPLASH_FIFO_DIR: refactor

PATCH In review Trevor Woerner 3 participants 5 messages Dec 24, 2020 – Dec 31, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 PSPLASH_FIFO_DIR: refactor

Add an entry for the psplash fifo directory to /etc/default/rcS and have the pieces of code that need it source it from there rather than duplicating the definition in multiple places throughout the code.

---
 meta/recipes-core/psplash/files/psplash-init    | 4 +++-
 meta/recipes-core/sysvinit/sysvinit/rc          | 5 +++--
 meta/recipes-core/sysvinit/sysvinit/rcS-default | 2 ++
 3 files changed, 8 insertions(+), 3 deletions(-)
meta/recipes-core/psplash/files/psplash-init +3 -1
index f58e043733..e0f80bcdc0 100755
@@ -7,6 +7,9 @@
 # Default-Stop:
 ### END INIT INFO
 
+. /etc/default/rcS
+export PSPLASH_FIFO_DIR
+
 if [ ! -e /dev/fb0 ]; then
     echo "Framebuffer /dev/fb0 not detected"
     echo "Boot splashscreen disabled"
@@ -23,7 +26,6 @@ for x in $CMDLINE; do
         esac
 done
 
-export PSPLASH_FIFO_DIR=/mnt/.psplash
 [ -d $PSPLASH_FIFO_DIR ] || mkdir -p $PSPLASH_FIFO_DIR
 if ! mountpoint -q $PSPLASH_FIFO_DIR; then
 	mount tmpfs -t tmpfs $PSPLASH_FIFO_DIR -o,size=40k
meta/recipes-core/sysvinit/sysvinit/rc +3 -2
index d0d3149821..c9f6558115 100755
@@ -17,6 +17,7 @@
 
 . /etc/default/rcS
 export VERBOSE
+export PSPLASH_FIFO_DIR
 
 startup_progress() {
     step=$(($step + $step_change))
@@ -27,7 +28,7 @@ startup_progress() {
     fi
     #echo "PROGRESS is $progress $runlevel $first_step + ($step of $num_steps) $step_change $progress_size"
     if type psplash-write >/dev/null 2>&1; then
-        PSPLASH_FIFO_DIR=/mnt/.psplash psplash-write "PROGRESS $progress" || true
+        psplash-write "PROGRESS $progress" || true
     fi
 }
 
@@ -173,7 +174,7 @@ startup() {
 #Uncomment to cause psplash to exit manually, otherwise it exits when it sees a VC switch
 if [ "x$runlevel" != "xS" ] && [ ! -x /etc/rc${runlevel}.d/S??xserver-nodm ]; then
     if type psplash-write >/dev/null 2>&1; then
-        PSPLASH_FIFO_DIR=/mnt/.psplash psplash-write "QUIT" || true
+        psplash-write "QUIT" || true
     	umount -l /mnt/.psplash
     fi
 fi
meta/recipes-core/sysvinit/sysvinit/rcS-default +2 -0
index e608a77c75..c576ff0678 100644
@@ -30,3 +30,5 @@ ROOTFS_READ_ONLY=no
 # rcS is also used when using busybox init and shares initscripts, some initscripts
 # need to have specific behavior depending on init system
 INIT_SYSTEM=sysvinit
+# set the psplash fifo directory
+PSPLASH_FIFO_DIR=/mnt/.psplash
Signature · 1 line
2.30.0.rc0
#1 lore raw

PATCH 2/3 psplash: fix working on first boot (sysvinit)

The psplash program has a mechanism for showing updates graphically in the form of a progress bar. The program is told when and how much to fill the progress bar via text messages sent through a fifo. If the fifo doesn't exist when the psplash program starts, it tries to create it. If the fifo doesn't exist or can't be created, the psplash program will refuse to run.

In various circumstances when a system is booted for the very first time, the filesystem is mounted, initially, read-only. As a result the psplash program is not able to run. On systems where the root filesystem is not meant to be read-only, it will eventually be mounted read-write. Therefore the psplash program can run on shutdown, and all subsequent boots. Only the first boot is affected.

If a fifo is created and included in the filesystem as part of the recipe, then filesystems that are meant to be read-only will have psplash work, as well as the cases where (on first boot) a read-write filesystem is initially mounted read-only.

NOTE: this is only an issue with sysvinit, and non-qemu machines. systemd-based systems don't suffer from this first-boot issue, and neither do the qemu machines.

NOTE 2: when psplash is done, it removes the fifo. Therefore the fifo used for communicating with psplash doesn't hang around unnecessarily in the filesystem.

---
 meta/recipes-core/psplash/psplash_git.bb        | 8 +++++++-
 meta/recipes-core/sysvinit/sysvinit/rc          | 1 -
 meta/recipes-core/sysvinit/sysvinit/rcS-default | 2 +-
 3 files changed, 8 insertions(+), 3 deletions(-)
meta/recipes-core/psplash/psplash_git.bb +7 -1
index 44f0007daf..0a19a664c0 100644
@@ -4,7 +4,7 @@ HOMEPAGE = "http://git.yoctoproject.org/cgit/cgit.cgi/psplash"
 SECTION = "base"
 LICENSE = "GPLv2+"
 LIC_FILES_CHKSUM = "file://psplash.h;beginline=1;endline=8;md5=8f232c1e95929eacab37f00900580224"
-DEPENDS = "gdk-pixbuf-native"
+DEPENDS = "gdk-pixbuf-native coreutils-native"
 
 SRCREV = "0a902f7cd875ccf018456451be369f05fa55f962"
 PV = "0.1+git${SRCPV}"
@@ -102,6 +102,10 @@ do_install_append() {
 	if ${@bb.utils.contains('DISTRO_FEATURES', 'sysvinit', 'true', 'false', d)}; then
 		install -d ${D}${sysconfdir}/init.d/
 		install -m 0755 ${WORKDIR}/psplash-init ${D}${sysconfdir}/init.d/psplash.sh
+
+		# make fifo for psplash
+		install -d ${D}/mnt
+		mkfifo ${D}/mnt/psplash_fifo
 	fi
 
 	if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
@@ -122,3 +126,5 @@ SYSTEMD_SERVICE_${PN} += "${@bb.utils.contains('PACKAGECONFIG', 'systemd', 'pspl
 
 INITSCRIPT_NAME = "psplash.sh"
 INITSCRIPT_PARAMS = "start 0 S . stop 20 0 1 6 ."
+
+FILES_${PN} += "/mnt"
meta/recipes-core/sysvinit/sysvinit/rc +0 -1
index c9f6558115..8e76f987c1 100755
@@ -175,6 +175,5 @@ startup() {
 if [ "x$runlevel" != "xS" ] && [ ! -x /etc/rc${runlevel}.d/S??xserver-nodm ]; then
     if type psplash-write >/dev/null 2>&1; then
         psplash-write "QUIT" || true
-    	umount -l /mnt/.psplash
     fi
 fi
meta/recipes-core/sysvinit/sysvinit/rcS-default +1 -1
index c576ff0678..76af22b359 100644
@@ -31,4 +31,4 @@ ROOTFS_READ_ONLY=no
 # need to have specific behavior depending on init system
 INIT_SYSTEM=sysvinit
 # set the psplash fifo directory
-PSPLASH_FIFO_DIR=/mnt/.psplash
+PSPLASH_FIFO_DIR=/mnt
Signature · 1 line
2.30.0.rc0
#2 lore raw

PATCH 3/3 psplash (sysvinit): add textual updates

In reply to Trevor Woerner

The psplash program contains a hidden text box immediately above the progress bar. Any text sent via a "MSG" command through psplash's fifo will be displayed, centred, above the progress bar. Add the ability to show which startup script is currently running, in sync with updates to the progress bar. If a startup script takes a bit longer than others and the progress bar stops momentarily, this allows the user to know which script is responsible.

This feature is added with a knob, default off, for enabling or disabling this feature. The knob is in the form of a PACKAGECONFIG against the sysvinit recipe: psplash-text-updates

NOTE: this knob can be changed in the filesystem at runtime by editing /etc/default/rcS regardless of how it is set in the build.

---
 meta/recipes-core/sysvinit/sysvinit/rc          | 3 +++
 meta/recipes-core/sysvinit/sysvinit/rcS-default | 2 ++
 meta/recipes-core/sysvinit/sysvinit_2.97.bb     | 7 ++++++-
 3 files changed, 11 insertions(+), 1 deletion(-)
meta/recipes-core/sysvinit/sysvinit/rc +3 -0
index 8e76f987c1..41196ec90b 100755
@@ -160,6 +160,9 @@ startup() {
 			#
 			[ -f $previous_start ] && [ ! -f $stop ] && continue
 		fi
+		if [ x"${PSPLASH_TEXT_UPDATES}" = x"yes" ]; then
+			psplash-write "MSG $(basename $i .sh | cut -c 4-)" || true
+		fi
 		case "$runlevel" in
 			0|6)
 				startup $i stop
meta/recipes-core/sysvinit/sysvinit/rcS-default +2 -0
index 76af22b359..f7c4a2f841 100644
@@ -32,3 +32,5 @@ ROOTFS_READ_ONLY=no
 INIT_SYSTEM=sysvinit
 # set the psplash fifo directory
 PSPLASH_FIFO_DIR=/mnt
+# psplash textual updates knob
+PSPLASH_TEXT_UPDATES=#PSPLASH_TEXT#
meta/recipes-core/sysvinit/sysvinit_2.97.bb +6 -1
index 98916f7f19..03099bf157 100644
@@ -29,6 +29,8 @@ inherit update-alternatives features_check
 DEPENDS_append = " update-rc.d-native base-passwd virtual/crypt"
 do_package_setscene[depends] = "${MLPREFIX}base-passwd:do_populate_sysroot"
 
+PACKAGECONFIG[psplash-text-updates] = ",,"
+
 REQUIRED_DISTRO_FEATURES = "sysvinit"
 
 ALTERNATIVE_${PN} = "init mountpoint halt reboot runlevel shutdown poweroff last lastb mesg utmpdump wall"
@@ -91,7 +93,10 @@ do_install () {
 		install -d ${D}${sysconfdir}/rc$level.d
 	done
 
-	install -m 0644    ${WORKDIR}/rcS-default	${D}${sysconfdir}/default/rcS
+	sed -e \
+		's:#PSPLASH_TEXT#:${@bb.utils.contains("PACKAGECONFIG","psplash-text-updates","yes","no", d)}:g' \
+		${WORKDIR}/rcS-default > ${D}${sysconfdir}/default/rcS
+	chmod 0644 ${D}${sysconfdir}/default/rcS
 	install -m 0755    ${WORKDIR}/rc		${D}${sysconfdir}/init.d
 	install -m 0755    ${WORKDIR}/rcS		${D}${sysconfdir}/init.d
 	install -m 0755    ${WORKDIR}/bootlogd.init     ${D}${sysconfdir}/init.d/bootlogd
Signature · 1 line
2.30.0.rc0
#3 lore raw
In reply to Trevor Woerner
Quoted 6 lines · Trevor Woerner

Add an entry for the psplash fifo directory to /etc/default/rcS and have the
pieces of code that need it source it from there rather than duplicating the
definition in multiple places throughout the code.

Quoted 6 lines

---
 meta/recipes-core/psplash/files/psplash-init    | 4 +++- meta/recipes-core/sysvinit/sysvinit/rc          | 5 +++-- meta/recipes-core/sysvinit/sysvinit/rcS-default | 2 ++

 3 files changed, 8 insertions(+), 3 deletions(-)

Unfortunately this doesn't seem to build on arm hosts, something to do with the fifo I'd guess, e.g.:

https://autobuilder.yoctoproject.org/typhoon/#/builders/97/builds/2179

I've not looked any further due to holidays but this probably needs a bugzilla entry and further investigation. Series is on hold until we get to the bottom of this.

Cheers,

Richard

#4 lore raw
Quoted 26 lines

-----Original Message-----
From: [email protected] <openembedded- [email protected]> On Behalf Of Richard Purdie
Sent: Wednesday, December 30, 2020 10:10 PM
To: Trevor Woerner <[email protected]>; openembedded- [email protected]
Cc: Ross Burton <[email protected]>; Jon Mason <[email protected]>; Saini, Naveen Kumar <[email protected]>
Subject: Re: [OE-core] [master-next][PATCH 1/3] PSPLASH_FIFO_DIR:
refactor

Quoted 10 lines · Trevor Woerner

Add an entry for the psplash fifo directory to /etc/default/rcS and have the pieces of code that need it source it from there rather than duplicating the definition in multiple places throughout the code.

---
 meta/recipes-core/psplash/files/psplash-init    | 4 +++- meta/recipes-core/sysvinit/sysvinit/rc          | 5 +++-- meta/recipes-core/sysvinit/sysvinit/rcS-default | 2 ++

 3 files changed, 8 insertions(+), 3 deletions(-)
Quoted 8 lines

Unfortunately this doesn't seem to build on arm hosts, something to do with the fifo I'd guess, e.g.:

https://autobuilder.yoctoproject.org/typhoon/#/builders/97/builds/2179

I've not looked any further due to holidays but this probably needs a bugzilla entry and further investigation. Series is on hold until we get to the bottom of this.

[SWAT] https://bugzilla.yoctoproject.org/show_bug.cgi?id=14173

Quoted 6 lines

Cheers,

Richard