Skip to contentSkip to conversation

ARM: imx8mq: reclock ARM PLL to 800MHz

PATCH Applied Lucas Stach 2 participants 2 messages Dec 29, 2020 – Jan 5, 2021

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: imx8mq: reclock ARM PLL to 800MHz

The BootROM sets up the ARM PLL to run at 1.6GHz and then uses the divider after the PLL the achieve a CPU clock rate of 800MHz. New Linux kernels (>= 5.8) switch to a clock path that bypasses the divider, as the divider should not be used for CPU clock frequencies >1GHz. If the BootROM setup is left unchanged this causes the CPU clock to jump to the full 1.6GHz until CPUfreq takes over and reprograms the PLL. This rate is outside of the chip specification and leads to crashes.

Fix this by reclocking the ARM PLL to 800MHz.

---
 arch/arm/dts/imx8mq.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
arch/arm/dts/imx8mq.dtsi +6 -2
index ec8347f38fa8..e56cdfe1308e 100644
@@ -17,7 +17,9 @@
 			  <&clk IMX8MQ_CLK_USDHC2>,
 			  <&clk IMX8MQ_CLK_ENET_AXI>,
 			  <&clk IMX8MQ_CLK_ENET_TIMER>,
-			  <&clk IMX8MQ_CLK_ENET_REF>;
+			  <&clk IMX8MQ_CLK_ENET_REF>,
+			  <&clk IMX8MQ_ARM_PLL>,
+			  <&clk IMX8MQ_CLK_A53_DIV>;
 
 	assigned-clock-parents =  <&clk IMX8MQ_SYS1_PLL_400M>,
 				  <&clk IMX8MQ_SYS1_PLL_400M>,
@@ -29,5 +31,7 @@
 			       <200000000>,
 			       <266000000>,
 			       <25000000>,
-			       <125000000>;
+			       <125000000>,
+			       <800000000>,
+			       <800000000>;
 };
Signature · 7 lines
2.29.2


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Applied
#1 lore raw
Quoted 8 lines · Lucas Stach

The BootROM sets up the ARM PLL to run at 1.6GHz and then uses the divider after the PLL the achieve a CPU clock rate of 800MHz. New Linux kernels (>= 5.8) switch to a clock path that bypasses the divider, as the divider should not be used for CPU clock frequencies >1GHz. If the BootROM setup is left unchanged this causes the CPU clock to jump to the full 1.6GHz until CPUfreq takes over and reprograms the PLL. This rate is outside of the chip specification and leads to crashes.

Quoted 6 lines

Fix this by reclocking the ARM PLL to 800MHz.

---
 arch/arm/dts/imx8mq.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

Applied, thanks

Sascha

Quoted 34 lines
arch/arm/dts/imx8mq.dtsi +6 -2
index ec8347f38fa8..e56cdfe1308e 100644
@@ -17,7 +17,9 @@
 			  <&clk IMX8MQ_CLK_USDHC2>,
 			  <&clk IMX8MQ_CLK_ENET_AXI>,
 			  <&clk IMX8MQ_CLK_ENET_TIMER>,
-			  <&clk IMX8MQ_CLK_ENET_REF>;
+			  <&clk IMX8MQ_CLK_ENET_REF>,
+			  <&clk IMX8MQ_ARM_PLL>,
+			  <&clk IMX8MQ_CLK_A53_DIV>;
 
 	assigned-clock-parents =  <&clk IMX8MQ_SYS1_PLL_400M>,
 				  <&clk IMX8MQ_SYS1_PLL_400M>,
@@ -29,5 +31,7 @@
 			       <200000000>,
 			       <266000000>,
 			       <25000000>,
-			       <125000000>;
+			       <125000000>,
+			       <800000000>,
+			       <800000000>;
 };
Signature · 7 lines
2.29.2


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Signature · 9 lines
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox