Skip to contentSkip to conversation

Ask: How speed up read nand flash on lpc3250

U-Boot xbl1986 2 participants 2 messages Jul 22, 2009 – Jul 28, 2009

lore
Share & tools
lore

xbl1986

author
#0 lore raw

CPU:LPC3250.
Nand:K9F2G8U0A 256M
the u-boot boot time now about 8s.
the step to read linux kernel less 2M cost more or less 4s!! I want to make it faster~,but don't know how to.
I try to change the memcpy function.but it's works not very well. so i want to via the maillist to find some help.
thank you~~.
--wizard

#1 lore raw
Quoted 1 line · On Wed, Jul 22, 2009 at 10:47:22PM +0800, xbl1986 wrote:

CPU:LPC3250.

I don't see that string anywhere in the U-Boot tree -- what NAND driver are you using?

Quoted 4 lines

Nand:K9F2G8U0A 256M
the u-boot boot time now about 8s.
the step to read linux kernel less 2M cost more or less 4s!! I want to make it faster~,but don't know how to.

Make sure you are creating an on-chip bad block table (NAND_USE_FLASH_BBT). You'll still have to scan for bad blocks on first boot, but it should be much faster after that.

-Scott