Support for RollBall 10G copper SFP modules
Subsystems (4)
v5 cover Support for RollBall 10G copper SFP modules
Hello,
this is v5 of series adding support for RollBall/Hilink SFP modules.
Checked with:
checkpatch.pl --max-line-length=80
Changes from v4:
- added patch adding SFP_PASSWORD = 0x7b to sfp.h
- patch adding RollBall MDIO I2C protocol support
- removed forgotten comment that was no longer true
- we now try to restore the page if the I2C transfer failed
- unfortunately we cannot simply move the code to do paged I2C transfers to sfp.c, because sfp.c depends on code inmdio-i2c.c, and if we added dependency the other way, I don't know what would happen to module loader (since both SFP and MDIO_I2C can be compiled as modules).
This can be refactored later, when someone needs paged I2C accesses in sfp.c
- added Reviewed-by tags
Changes from v3:
- RollBall mdio-i2c driver now sets/restores SFP_PAGE for every MDIO access.
I first wanted to achieve this operation (setting SFP_PAGE/doing MDIO/restoring SFP_PAGE) via one call do i2c_transfer, by constructing msgs array in such a way, but it turned out that this doesn't work on RollBall SFPs, because changed SFP_PAGE takes into account only after i2c_transfer ends.
So instead I use i2c_lock_bus/serveral __i2c_transfers/i2c_unlock_bus.
- I have removed the patch which changes MACTYPE in the marvell10g driver, since Russell has in his net-queue a better solution. I still think that my patch would have sufficed temporarily (and would not cause regressions), but nobody wanted to review it. If you think that I should sent this series again with that patch, please let me know.
Changes from v2:
- added comment into the patch adding support for RollBall I2C MDIO protocol, saying that we expect the SFP_PAGE not to be changed by the SFP code, as requested by Russell. If, in the future, SFP code starts modifying SFP_PAGE, we will have to handle it in mdio-i2c somehow
- destruction of I2C MDIO bus in patch 3/5 now depends on whether the MDIO bus is not NULL, instead of whether PHY exists, as suggested by Russell
- changed waiting time for RollBall module to initialize from 30 seconds to 25 seconds. Testing shows that it is never longer than 21-22 seconds, so waiting 25 seconds instead of 30 is IMO safe enough
- added Russell's Reviewed-by tags where relevant
Changes from v1:
- wrapped to 80 columns as per Russell's request
- initialization of RollBall MDIO I2C protocol moved from sfp.c to mdio-i2c.c as per Russell's request
- second patch removes the 802.3z check also from phylink_sfp_config as suggested by Russell
- creation/destruction of mdiobus for SFP now occurs before probing for PHY/after releasing PHY (as suggested by Russell)
- the last patch became a little simpler after the above was done
Marek
Marek Behún (5):
net: sfp: add SFP_PASSWORD address
net: phy: mdio-i2c: support I2C MDIO protocol for RollBall SFP modules
net: phylink: allow attaching phy for SFP modules on 802.3z mode
net: sfp: create/destroy I2C mdiobus before PHY probe/after PHY
release
net: sfp: add support for multigig RollBall transceivers
drivers/net/mdio/mdio-i2c.c | 308 +++++++++++++++++++++++++++++++++- drivers/net/phy/phylink.c | 5 +- drivers/net/phy/sfp.c | 66 ++++++-- include/linux/mdio/mdio-i2c.h | 8 +- include/linux/sfp.h | 1 + 5 files changed, 368 insertions(+), 20 deletions(-)
base-commit: 0ae5b43d6dde6003070106e97cd0d41bace2eeb2
Signature · 1 line
2.26.2
PATCH v5 1/5 net: sfp: add SFP_PASSWORD address
Add SFP_PASSWORD = 0x7b to the diagnostics enumerator. This address is described in SFF-8436 and SFF-8636.
--- include/linux/sfp.h | 1 + 1 file changed, 1 insertion(+)
include/linux/sfp.h +1 -0
@@ -490,6 +490,7 @@ enum {SFP_EXT_STATUS =0x76 ,SFP_VSL =0x78 , +SFP_PASSWORD =0x7b , SFP_PAGE = 0x7f, };
Signature · 1 line
2.26.2
PATCH v5 2/5 net: phy: mdio-i2c: support I2C MDIO protocol for RollBall SFP modules
In reply to Marek BehúnSome multigig SFPs from RollBall and Hilink do not expose functional MDIO access to the internal PHY of the SFP via I2C address 0x56 (although there seems to be read-only clause 22 access on this address).
Instead these SFPs PHY can be accessed via I2C via the SFP Enhanced Digital Diagnostic Interface - I2C address 0x51. The SFP_PAGE has to be selected to 3 and the password must be filled with 0xff bytes for this PHY communication to work.
This extends the mdio-i2c driver to support this protocol by adding a special parameter to mdio_i2c_alloc function via which this RollBall protocol can be selected.
--- drivers/net/mdio/mdio-i2c.c | 308 +++++++++++++++++++++++++++++++++- drivers/net/phy/sfp.c | 2 +- include/linux/mdio/mdio-i2c.h | 8 +- 3 files changed, 311 insertions(+), 7 deletions(-)
drivers/net/mdio/mdio-i2c.c +303 -5
@@ -3,6 +3,7 @@* MDIO I2C bridge * * Copyright (C) 2015-2016 Russell King +* Copyright (C) 2021 Marek Behun * * Network PHYs can appear on I2C buses when they are part of SFP module. * This driver exposes these PHYs to the networking PHY code, allowing
@@ -12,6 +13,7 @@#include <linux/i2c.h> #include <linux/mdio/mdio-i2c.h> #include <linux/phy.h> +#include <linux/sfp.h> /* * I2C bus addresses 0x50 and 0x51 are normally an EEPROM, which is
@@ -28,7 +30,7 @@ static unsigned int i2c_mii_phy_addr(int phy_id)return phy_id +0x40 ; } -static int i2c_mii_read (struct mii_bus *bus,int phy_id,int reg) +static int i2c_mii_read_default (struct mii_bus *bus,int phy_id,int reg) {struct i2c_adapter *i2c = bus->priv;struct i2c_msg msgs[2 ];
@@ -62,7 +64,8 @@ static int i2c_mii_read(struct mii_bus *bus, int phy_id, int reg)return data[0 ] <<8 | data[1 ]; } -static int i2c_mii_write (struct mii_bus *bus,int phy_id,int reg,u16 val) +static int i2c_mii_write_default (struct mii_bus *bus,int phy_id,int reg, +u16 val) {struct i2c_adapter *i2c = bus->priv;struct i2c_msg msg;
@@ -91,9 +94,286 @@ static int i2c_mii_write(struct mii_bus *bus, int phy_id, int reg, u16 val)return ret <0 ? ret :0 ; } -struct mii_bus *mdio_i2c_alloc (struct device *parent,struct i2c_adapter *i2c) +/* RollBall SFPs do not access internal PHY via I2C address 0x56, but +* instead via address 0x51, when SFP page is set to 0x03 and password to +* 0xffffffff. +* +* address size contents description +* ------- ---- -------- ----------- +* 0x80 1 CMD 0x01/0x02/0x04 for write/read/done +* 0x81 1 DEV Clause 45 device +* 0x82 2 REG Clause 45 register +* 0x84 2 VAL Register value +*/ +#define ROLLBALL_PHY_I2C_ADDR 0x51 + +#define ROLLBALL_CMD_ADDR 0x80 +#define ROLLBALL_DATA_ADDR 0x81 + +#define ROLLBALL_CMD_WRITE 0x01 +#define ROLLBALL_CMD_READ 0x02 +#define ROLLBALL_CMD_DONE 0x04 + +#define SFP_PAGE_ROLLBALL_MDIO 3 + +static int __i2c_transfer_err (struct i2c_adapter *i2c,struct i2c_msg *msgs, +int num) +{ +int ret; + + ret =__i2c_transfer (i2c, msgs, num); +if (ret <0 ) +return ret; +else if (ret != num) +return -EIO ; +else +return 0 ; +} + +static int __i2c_rollball_get_page (struct i2c_adapter *i2c,int bus_addr, +u8 *page) +{ +struct i2c_msg msgs[2 ]; +u8 addr =SFP_PAGE ; + + msgs[0 ].addr = bus_addr; + msgs[0 ].flags =0 ; + msgs[0 ].len =1 ; + msgs[0 ].buf = &addr; + + msgs[1 ].addr = bus_addr; + msgs[1 ].flags =I2C_M_RD ; + msgs[1 ].len =1 ; + msgs[1 ].buf = page; + +return __i2c_transfer_err (i2c, msgs,2 ); +} + +static int __i2c_rollball_set_page (struct i2c_adapter *i2c,int bus_addr, +u8 page) +{ +struct i2c_msg msg; +u8 buf[2 ]; + + buf[0 ] =SFP_PAGE ; + buf[1 ] = page; + + msg.addr = bus_addr; + msg.flags =0 ; + msg.len =2 ; + msg.buf = buf; + +return __i2c_transfer_err (i2c, &msg,1 ); +} + +/* In order to not interfere with other SFP code (which possibly may manipulate +* SFP_PAGE), for every transfer we do this: +* 1. lock the bus +* 2. save content of SFP_PAGE +* 3. set SFP_PAGE to 3 +* 4. do the transfer +* 5. restore original SFP_PAGE +* 6. unlock the bus +* Note that one might think that steps 2 to 5 could be theoretically done all +* in one call to i2c_transfer (by constructing msgs array in such a way), but +* unfortunately tests show that this does not work :-( Changed SFP_PAGE does +* not take into account until i2c_transfer() is done. +*/ +static int i2c_transfer_rollball (struct i2c_adapter *i2c, +struct i2c_msg *msgs,int num) +{ +int ret, main_err =0 ; +u8 saved_page; + +i2c_lock_bus (i2c,I2C_LOCK_SEGMENT ); + +/* save original page */ + ret =__i2c_rollball_get_page (i2c, msgs->addr, &saved_page); +if (ret) + goto unlock; + +/* change to RollBall MDIO page */ + ret =__i2c_rollball_set_page (i2c, msgs->addr,SFP_PAGE_ROLLBALL_MDIO ); +if (ret) + goto unlock; + +/* do the transfer; we try to restore original page if this fails */ + ret =__i2c_transfer_err (i2c, msgs, num); +if (ret) + main_err = ret; + +/* restore original page */ + ret =__i2c_rollball_set_page (i2c, msgs->addr, saved_page); + +unlock: +i2c_unlock_bus (i2c,I2C_LOCK_SEGMENT ); + +return main_err ? : ret; +} + +static int i2c_rollball_mii_poll (struct mii_bus *bus,int bus_addr,u8 *buf, +size_t len) +{ +struct i2c_adapter *i2c = bus->priv; +struct i2c_msg msgs[2 ]; +u8 cmd_addr, tmp, *res; +int i, ret; + + cmd_addr =ROLLBALL_CMD_ADDR ; + + res = buf ? buf : &tmp; + len = buf ? len :1 ; + + msgs[0 ].addr = bus_addr; + msgs[0 ].flags =0 ; + msgs[0 ].len =1 ; + msgs[0 ].buf = &cmd_addr; + + msgs[1 ].addr = bus_addr; + msgs[1 ].flags =I2C_M_RD ; + msgs[1 ].len = len; + msgs[1 ].buf = res; + +/* By experiment it takes up to 70 ms to access a register for these +* SFPs. Sleep 20ms between iterations and try 10 times. +*/ + i =10 ; +do { +msleep (20 ); + + ret =i2c_transfer_rollball (i2c, msgs,ARRAY_SIZE (msgs)); +if (ret) +return ret; + +if (*res ==ROLLBALL_CMD_DONE ) +return 0 ; + }while (i-- >0 ); + +dev_dbg (&bus->dev,"poll timed out\n" ); + +return -ETIMEDOUT ; +} + +static int i2c_rollball_mii_cmd (struct mii_bus *bus,int bus_addr,u8 cmd, +u8 *data,size_t len) +{ +struct i2c_adapter *i2c = bus->priv; +struct i2c_msg msgs[2 ]; +u8 cmdbuf[2 ]; + + cmdbuf[0 ] =ROLLBALL_CMD_ADDR ; + cmdbuf[1 ] = cmd; + + msgs[0 ].addr = bus_addr; + msgs[0 ].flags =0 ; + msgs[0 ].len = len; + msgs[0 ].buf = data; + + msgs[1 ].addr = bus_addr; + msgs[1 ].flags =0 ; + msgs[1 ].len =sizeof (cmdbuf); + msgs[1 ].buf = cmdbuf; + +return i2c_transfer_rollball (i2c, msgs,ARRAY_SIZE (msgs)); +} + +static int i2c_mii_read_rollball (struct mii_bus *bus,int phy_id,int reg) +{ +u8 buf[4 ], res[6 ]; +int bus_addr, ret; +u16 val; + +if (!(reg &MII_ADDR_C45 )) +return -EOPNOTSUPP ; + + bus_addr =i2c_mii_phy_addr (phy_id); +if (bus_addr !=ROLLBALL_PHY_I2C_ADDR ) +return 0xffff ; + + buf[0 ] =ROLLBALL_DATA_ADDR ; + buf[1 ] = (reg >>16 ) &0x1f ; + buf[2 ] = (reg >>8 ) &0xff ; + buf[3 ] = reg &0xff ; + + ret =i2c_rollball_mii_cmd (bus, bus_addr,ROLLBALL_CMD_READ , buf, +sizeof (buf)); +if (ret <0 ) +return ret; + + ret =i2c_rollball_mii_poll (bus, bus_addr, res,sizeof (res)); +if (ret == -ETIMEDOUT ) +return 0xffff ; +else if (ret <0 ) +return ret; + + val = res[4 ] <<8 | res[5 ]; + +return val; +} + +static int i2c_mii_write_rollball (struct mii_bus *bus,int phy_id,int reg, +u16 val) +{ +int bus_addr, ret; +u8 buf[6 ]; + +if (!(reg &MII_ADDR_C45 )) +return -EOPNOTSUPP ; + + bus_addr =i2c_mii_phy_addr (phy_id); +if (bus_addr !=ROLLBALL_PHY_I2C_ADDR ) +return 0 ; + + buf[0 ] =ROLLBALL_DATA_ADDR ; + buf[1 ] = (reg >>16 ) &0x1f ; + buf[2 ] = (reg >>8 ) &0xff ; + buf[3 ] = reg &0xff ; + buf[4 ] = val >>8 ; + buf[5 ] = val &0xff ; + + ret =i2c_rollball_mii_cmd (bus, bus_addr,ROLLBALL_CMD_WRITE , buf, +sizeof (buf)); +if (ret <0 ) +return ret; + + ret =i2c_rollball_mii_poll (bus, bus_addr,NULL ,0 ); +if (ret <0 ) +return ret; + +return 0 ; +} + +static int i2c_mii_init_rollball (struct i2c_adapter *i2c) +{ +struct i2c_msg msg; +u8 pw[5 ]; +int ret; + + pw[0 ] =SFP_PASSWORD ; + pw[1 ] =0xff ; + pw[2 ] =0xff ; + pw[3 ] =0xff ; + pw[4 ] =0xff ; + + msg.addr =ROLLBALL_PHY_I2C_ADDR ; + msg.flags =0 ; + msg.len =sizeof (pw); + msg.buf = pw; + + ret =i2c_transfer (i2c, &msg,1 ); +if (ret <0 ) +return ret; +else if (ret !=1 ) +return -EIO ; +else +return 0 ; +} + +struct mii_bus *mdio_i2c_alloc (struct device *parent,struct i2c_adapter *i2c, +enum mdio_i2c_proto protocol) {struct mii_bus *mii; +int ret;if (!i2c_check_functionality (i2c,I2C_FUNC_I2C ))return ERR_PTR (-EINVAL );
@@ -104,10 +384,28 @@ struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c)snprintf (mii->id,MII_BUS_ID_SIZE ,"i2c:%s" ,dev_name (parent)); mii->parent = parent; - mii->read = i2c_mii_read; - mii->write = i2c_mii_write; mii->priv = i2c; +switch (protocol) { +case MDIO_I2C_ROLLBALL : + ret =i2c_mii_init_rollball (i2c); +if (ret <0 ) { +dev_err (parent, +"Cannot initialize RollBall MDIO I2C protocol: %d\n" , + ret); +mdiobus_free (mii); +return ERR_PTR (ret); + } + + mii->read = i2c_mii_read_rollball; + mii->write = i2c_mii_write_rollball; +break ; +default : + mii->read = i2c_mii_read_default; + mii->write = i2c_mii_write_default; +break ; + } +return mii; }EXPORT_SYMBOL_GPL (mdio_i2c_alloc);
drivers/net/phy/sfp.c +1 -1
@@ -423,7 +423,7 @@ static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c) sfp->read = sfp_i2c_read; sfp->write = sfp_i2c_write; - i2c_mii =mdio_i2c_alloc (sfp->dev, i2c); + i2c_mii =mdio_i2c_alloc (sfp->dev, i2c,MDIO_I2C_DEFAULT );if (IS_ERR (i2c_mii))return PTR_ERR (i2c_mii);
include/linux/mdio/mdio-i2c.h +7 -1
@@ -11,6 +11,12 @@ struct device;struct i2c_adapter ;struct mii_bus ; -struct mii_bus *mdio_i2c_alloc (struct device *parent,struct i2c_adapter *i2c); +enum mdio_i2c_proto { +MDIO_I2C_DEFAULT , +MDIO_I2C_ROLLBALL , +}; + +struct mii_bus *mdio_i2c_alloc (struct device *parent,struct i2c_adapter *i2c, +enum mdio_i2c_proto protocol);#endif
Signature · 1 line
2.26.2
PATCH v5 3/5 net: phylink: allow attaching phy for SFP modules on 802.3z mode
In reply to Marek BehúnSome SFPs may contain an internal PHY which may in some cases want to connect with the host interface in 1000base-x/2500base-x mode. Do not fail if such PHY is being attached in one of these PHY interface modes.
--- drivers/net/phy/phylink.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/net/phy/phylink.c +1 -4
@@ -1018,7 +1018,7 @@ static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy, {if (WARN_ON (pl->cfg_link_an_mode ==MLO_AN_FIXED || (pl->cfg_link_an_mode ==MLO_AN_INBAND && -phy_interface_mode_is_8023z (interface)))) +phy_interface_mode_is_8023z (interface) && !pl->sfp_bus)))return -EINVAL ;if (pl->phydev)
@@ -2069,9 +2069,6 @@ static int phylink_sfp_config(struct phylink *pl, u8 mode,phylink_an_mode_str (mode),phy_modes (config.interface), __ETHTOOL_LINK_MODE_MASK_NBITS, support); -if (phy_interface_mode_is_8023z (iface) && pl->phydev) -return -EINVAL ; - changed = !linkmode_equal (pl->supported, support);if (changed) {linkmode_copy (pl->supported, support);
Signature · 1 line
2.26.2
PATCH v5 4/5 net: sfp: create/destroy I2C mdiobus before PHY probe/after PHY release
In reply to Marek BehúnInstead of configuring the I2C mdiobus when SFP driver is probed, create/destroy the mdiobus before the PHY is probed for/after it is released.
This way we can tell the mdio-i2c code which protocol to use for each SFP transceiver.
--- drivers/net/phy/sfp.c | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-)
drivers/net/phy/sfp.c +26 -4
@@ -218,6 +218,7 @@ struct sfp {struct i2c_adapter *i2c;struct mii_bus *i2c_mii;struct sfp_bus *sfp_bus; +enum mdio_i2c_proto mdio_protocol;struct phy_device *mod_phy;const struct sff_data *type;size_t i2c_block_size;
@@ -413,9 +414,6 @@ static int sfp_i2c_write(struct sfp *sfp, bool a2, u8 dev_addr, void *buf,static int sfp_i2c_configure (struct sfp *sfp,struct i2c_adapter *i2c) { -struct mii_bus *i2c_mii; -int ret; -if (!i2c_check_functionality (i2c,I2C_FUNC_I2C ))return -EINVAL ;
@@ -423,7 +421,15 @@ static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c) sfp->read = sfp_i2c_read; sfp->write = sfp_i2c_write; - i2c_mii =mdio_i2c_alloc (sfp->dev, i2c,MDIO_I2C_DEFAULT ); +return 0 ; +} + +static int sfp_i2c_mdiobus_create (struct sfp *sfp) +{ +struct mii_bus *i2c_mii; +int ret; + + i2c_mii =mdio_i2c_alloc (sfp->dev, sfp->i2c, sfp->mdio_protocol);if (IS_ERR (i2c_mii))return PTR_ERR (i2c_mii);
@@ -441,6 +447,12 @@ static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)return 0 ; } +static void sfp_i2c_mdiobus_destroy (struct sfp *sfp) +{ +mdiobus_unregister (sfp->i2c_mii); + sfp->i2c_mii =NULL ; +} +/* Interface */ static int sfp_read (struct sfp *sfp,bool a2,u8 addr,void *buf,size_t len) {
@@ -1881,6 +1893,8 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)else sfp->module_t_start_up =T_START_UP ; + sfp->mdio_protocol =MDIO_I2C_DEFAULT ; +return 0 ; }
@@ -2051,6 +2065,8 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event)sfp_module_stop (sfp->sfp_bus);if (sfp->mod_phy)sfp_sm_phy_detach (sfp); +if (sfp->i2c_mii) +sfp_i2c_mdiobus_destroy (sfp);sfp_module_tx_disable (sfp);sfp_soft_stop_poll (sfp);sfp_sm_next (sfp,SFP_S_DOWN ,0 );
@@ -2113,6 +2129,12 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event) sfp->sm_fault_retries == N_FAULT_INIT); }else if (event ==SFP_E_TIMEOUT || event ==SFP_E_TX_CLEAR ) { init_done: +/* Create mdiobus and start trying for PHY */ + ret =sfp_i2c_mdiobus_create (sfp); +if (ret <0 ) { +sfp_sm_next (sfp,SFP_S_FAIL ,0 ); +break ; + } sfp->sm_phy_retries =R_PHY_RETRY ; goto phy_probe; }
Signature · 1 line
2.26.2
PATCH v5 5/5 net: sfp: add support for multigig RollBall transceivers
In reply to Marek BehúnThis adds support for multigig copper SFP modules from RollBall/Hilink. These modules have a specific way to access clause 45 registers of the internal PHY.
We also need to wait at least 22 seconds after deasserting TX disable before accessing the PHY. The code waits for 25 seconds just to be sure.
--- drivers/net/phy/sfp.c | 36 ++++++++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-)
drivers/net/phy/sfp.c +30 -6
@@ -166,6 +166,7 @@ static const enum gpiod_flags gpio_flags[] = {* on board (for a copper SFP) time to initialise. */ #define T_WAIT msecs_to_jiffies(50) +#define T_WAIT_ROLLBALL msecs_to_jiffies(25000)#define T_START_UP msecs_to_jiffies(300)#define T_START_UP_BAD_GPON msecs_to_jiffies(60000)
@@ -205,8 +206,11 @@ static const enum gpiod_flags gpio_flags[] = {/* SFP modules appear to always have their PHY configured for bus address * 0x56 (which with mdio-i2c, translates to a PHY address of 22). +* RollBall SFPs access phy via SFP Enhanced Digital Diagnostic Interface +* via address 0x51 (mdio-i2c will use RollBall protocol on this address). */ -#define SFP_PHY_ADDR 22 +#define SFP_PHY_ADDR 22 +#define SFP_PHY_ADDR_ROLLBALL 17struct sff_data {unsigned int gpios;
@@ -219,6 +223,7 @@ struct sfp {struct mii_bus *i2c_mii;struct sfp_bus *sfp_bus;enum mdio_i2c_proto mdio_protocol; +int phy_addr;struct phy_device *mod_phy;const struct sff_data *type;size_t i2c_block_size;
@@ -251,6 +256,7 @@ struct sfp {struct sfp_eeprom_id id;unsigned int module_power_mW;unsigned int module_t_start_up; +unsigned int module_t_wait;#if IS_ENABLED (CONFIG_HWMON )struct sfp_diag diag;
@@ -1505,7 +1511,7 @@ static int sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)struct phy_device *phy;int err; - phy =get_phy_device (sfp->i2c_mii,SFP_PHY_ADDR , is_c45); + phy =get_phy_device (sfp->i2c_mii, sfp->phy_addr, is_c45);if (phy ==ERR_PTR (-ENODEV ))return PTR_ERR (phy);if (IS_ERR (phy)) {
@@ -1895,6 +1901,23 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report) sfp->mdio_protocol =MDIO_I2C_DEFAULT ; + sfp->phy_addr =SFP_PHY_ADDR ; + sfp->module_t_wait =T_WAIT ; + +if (((!memcmp (id.base.vendor_name,"OEM " ,16 ) || + !memcmp (id.base.vendor_name,"Turris " ,16 )) && + (!memcmp (id.base.vendor_pn,"SFP-10G-T " ,16 ) || + !memcmp (id.base.vendor_pn,"RTSFP-10" ,8 )))) { + sfp->mdio_protocol =MDIO_I2C_ROLLBALL ; + sfp->phy_addr =SFP_PHY_ADDR_ROLLBALL ; + sfp->module_t_wait =T_WAIT_ROLLBALL ; + +/* RollBall SFPs may have wrong (zero) extended compliance code +* burned in EEPROM. For PHY probing we need the correct one. +*/ + id.base.extended_cc =SFF8024_ECC_10GBASE_T_SFI ; + } +return 0 ; }
@@ -2090,9 +2113,10 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event)/* We need to check the TX_FAULT state, which is not defined * while TX_DISABLE is asserted. The earliest we want to do -* anything (such as probe for a PHY) is 50ms. +* anything (such as probe for a PHY) is 50ms. (or more on +* specific modules). */ -sfp_sm_next (sfp,SFP_S_WAIT ,T_WAIT ); +sfp_sm_next (sfp,SFP_S_WAIT , sfp->module_t_wait);break ;case SFP_S_WAIT :
@@ -2106,8 +2130,8 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event)* deasserting. */ timeout = sfp->module_t_start_up; -if (timeout >T_WAIT ) - timeout -=T_WAIT ; +if (timeout > sfp->module_t_wait) + timeout -= sfp->module_t_wait;else timeout =1 ;
Signature · 1 line
2.26.2
Russell King - ARM Linux admin
maintainerRe: [PATCH net-next v5 1/5] net: sfp: add SFP_PASSWORD address
In reply to Marek BehúnQuoted 2 lines · Marek Behún
Add
SFP_PASSWORD=0x7bto the diagnostics enumerator. This address is described in SFF-8436 and SFF-8636.
However, as I mentioned previously, these are not relevant for SFPs, but are for QSFPs, and QSFPs have a totally different layout.
The data structure for this enum is described by SFF-8472, and it lists
Vendor Specific Locations [Address A2h, Bytes 120-126]
This is what the SFP_VSL definition covers.
SFF-8436 defines the layout for "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER":
Table 17 - Lower Memory Map (A0h)
Address Description Type Passive Copper, Optical
Active Copper, Module Active Optical
0 Identifier (1 Read-Only R R
Byte)
1-2 Status (2 Bytes) Read-Only See Table 18
3-21 Interrupt Flags Read-Only See Tables 19-21
(19 Bytes)
...
123-126 Password Entry Read/Write O O
Area (optional) 4
Bytes
127 Page Select Byte Read/Write R R
So, SFF-8436 is not relevant - not only is it for a different address but the whole format is different.
SFF-8636 is "Specification for Management Interface for Cabled Environments" and defines:
2-Wire Serial Address 1010000x
Lower Page 00h
0 Identifier
1- 2 Status
3- 21 Interrupt Flags
...
123-126 Password Entry Area (Optional)
127 Page Select Byte
So again, SFF-8636 is not relevant for the same reasons as SFF-8436.
We're left with SFF-8472, which mentions no password entry area, but leaves the area from 120-127 open as "vendor specific", so I don't think it is appropriate to start adding vendor specific definitions as if they were generic to sfp.h
I would instead suggest defining this inside mdio-i2c.c as
#define ROLLERBALL_PASSWORD (SFP_VSL + 3)
rather than trying to make this appear generic.
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Russell King - ARM Linux admin
maintainerRe: [PATCH net-next v5 4/5] net: sfp: create/destroy I2C mdiobus before PHY probe/after PHY release
In reply to Marek BehúnQuoted 6 lines · Marek Behún
Instead of configuring the I2C mdiobus when SFP driver is probed, create/destroy the mdiobus before the PHY is probed for/after it is released.
This way we can tell the mdio-i2c code which protocol to use for each SFP transceiver.
I've been thinking a bit more about this. It looks like it will allocate and free the MDIO bus each time any module is inserted or removed, even a fiber module that wouldn't ever have a PHY. This adds unnecessary noise to the kernel message log.
We only probe for a PHY if one of:
- id.base.extended_cc is SFF8024_ECC_10GBASE_T_SFI, SFF8024_ECC_10GBASE_T_SR, SFF8024_ECC_5GBASE_T, or SFF8024_ECC_2_5GBASE_T.
- id.base.e1000_base_t is set.
So, we only need the MDIO bus to be registered if one of those is true.
As you are introducing "enum mdio_i2c_proto", I'm wondering whether that should include "MDIO_I2C_NONE", and we should only register the bus and probe for a PHY if it is not MDIO_I2C_NONE.
Maybe we should have:
enum mdio_i2c_proto {
MDIO_I2C_NONE,
MDIO_I2C_MARVELL_C22,
MDIO_I2C_C45,
MDIO_I2C_ROLLBALL,
...
};with:
sfp->mdio_protocol = MDIO_I2C_NONE;
if (((!memcmp(id.base.vendor_name, "OEM ", 16) ||
!memcmp(id.base.vendor_name, "Turris ", 16)) &&
(!memcmp(id.base.vendor_pn, "SFP-10G-T ", 16) ||
!memcmp(id.base.vendor_pn, "RTSFP-10", 8)))) {
sfp->mdio_protocol = MDIO_I2C_ROLLBALL;
sfp->module_t_wait = T_WAIT_ROLLBALL;
} else {
switch (id.base.extended_cc) {
...
}
}static int sfp_sm_add_mdio_bus(struct sfp *sfp)
{
int err = 0;
if (sfp->mdio_protocol != MDIO_I2C_NONE)
err = sfp_i2c_mdiobus_create(sfp);
return err;
}called from the place you call sfp_i2c_mdiobus_create(), and sfp_sm_probe_for_phy() becomes:
static int sfp_sm_probe_for_phy(struct sfp *sfp)
{
int err = 0;
switch (sfp->mdio_protocol) {
case MDIO_I2C_NONE:
break;
case MDIO_I2C_MARVELL_C22:
err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR, false);
break;
case MDIO_I2C_C45:
err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR, true);
break;
case MDIO_I2C_ROLLBALL:
err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR_ROLLBALL, true);
break;
}
return err;
}This avoids having to add the PHY address, as well as fudge around with id.base.extended_cc to get the PHY probed.
Thoughts?
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Re: [PATCH net-next v5 4/5] net: sfp: create/destroy I2C mdiobus before PHY probe/after PHY release
Quoted 88 lines · On Thursday 14 January 2021 16:07:19 Russell King - ARM Linux admin wrote:
Quoted 6 lines · Marek Behún
Instead of configuring the I2C mdiobus when SFP driver is probed, create/destroy the mdiobus before the PHY is probed for/after it is released.
This way we can tell the mdio-i2c code which protocol to use for each SFP transceiver.
I've been thinking a bit more about this. It looks like it will allocate and free the MDIO bus each time any module is inserted or removed, even a fiber module that wouldn't ever have a PHY. This adds unnecessary noise to the kernel message log.
We only probe for a PHY if one of:
- id.base.extended_cc is
SFF8024_ECC_10GBASE_T_SFI,SFF8024_ECC_10GBASE_T_SR,SFF8024_ECC_5GBASE_T, orSFF8024_ECC_2_5GBASE_T.
- id.base.e1000_base_t is set.So, we only need the MDIO bus to be registered if one of those is true.
As you are introducing "enum
mdio_i2c_proto", I'm wondering whether that should include "MDIO_I2C_NONE", and we should only register the bus and probe for a PHY if it is notMDIO_I2C_NONE.Maybe we should have:
enum mdio_i2c_proto { MDIO_I2C_NONE, MDIO_I2C_MARVELL_C22, MDIO_I2C_C45, MDIO_I2C_ROLLBALL, ... };with:
sfp->mdio_protocol = MDIO_I2C_NONE; if (((!memcmp(id.base.vendor_name, "OEM ", 16) || !memcmp(id.base.vendor_name, "Turris ", 16)) && (!memcmp(id.base.vendor_pn, "SFP-10G-T ", 16) || !memcmp(id.base.vendor_pn, "RTSFP-10", 8)))) { sfp->mdio_protocol = MDIO_I2C_ROLLBALL; sfp->module_t_wait = T_WAIT_ROLLBALL; } else { switch (id.base.extended_cc) { ... } }static int
sfp_sm_add_mdio_bus(struct sfp *sfp){ int err = 0; if (sfp->mdio_protocol != MDIO_I2C_NONE) err = sfp_i2c_mdiobus_create(sfp); return err; }called from the place you call
sfp_i2c_mdiobus_create(), andsfp_sm_probe_for_phy()becomes:static int
sfp_sm_probe_for_phy(struct sfp *sfp){ int err = 0; switch (sfp->mdio_protocol) { case MDIO_I2C_NONE: break; case MDIO_I2C_MARVELL_C22: err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR, false); break; case MDIO_I2C_C45: err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR, true); break; case MDIO_I2C_ROLLBALL: err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR_ROLLBALL, true); break; } return err; }
Quoted 4 lines
This avoids having to add the PHY address, as well as fudge around with id.base.extended_cc to get the PHY probed.
Thoughts?
Hello Russell! For me this solution looks more cleaner. As all those MDIO access protocols are vendor dependent, kernel code should not detect them only from the standard (non-vendor) extended_cc property.
Re: [PATCH net-next v5 4/5] net: sfp: create/destroy I2C mdiobus before PHY probe/after PHY release
Quoted 91 lines · On Mon, 18 Jan 2021 10:38:32 +0100 Pali Rohár <[email protected]> wrote:
Quoted 89 lines · On Thursday 14 January 2021 16:07:19 Russell King - ARM Linux admin wrote:
Quoted 6 lines · Marek Behún
Instead of configuring the I2C mdiobus when SFP driver is probed, create/destroy the mdiobus before the PHY is probed for/after it is released.
This way we can tell the mdio-i2c code which protocol to use for each SFP transceiver.
I've been thinking a bit more about this. It looks like it will allocate and free the MDIO bus each time any module is inserted or removed, even a fiber module that wouldn't ever have a PHY. This adds unnecessary noise to the kernel message log.
We only probe for a PHY if one of:
- id.base.extended_cc is
SFF8024_ECC_10GBASE_T_SFI,SFF8024_ECC_10GBASE_T_SR,SFF8024_ECC_5GBASE_T, orSFF8024_ECC_2_5GBASE_T.
- id.base.e1000_base_t is set.So, we only need the MDIO bus to be registered if one of those is true.
As you are introducing "enum
mdio_i2c_proto", I'm wondering whether that should include "MDIO_I2C_NONE", and we should only register the bus and probe for a PHY if it is notMDIO_I2C_NONE.Maybe we should have:
enum mdio_i2c_proto { MDIO_I2C_NONE, MDIO_I2C_MARVELL_C22, MDIO_I2C_C45, MDIO_I2C_ROLLBALL, ... };with:
sfp->mdio_protocol = MDIO_I2C_NONE; if (((!memcmp(id.base.vendor_name, "OEM ", 16) || !memcmp(id.base.vendor_name, "Turris ", 16)) && (!memcmp(id.base.vendor_pn, "SFP-10G-T ", 16) || !memcmp(id.base.vendor_pn, "RTSFP-10", 8)))) { sfp->mdio_protocol = MDIO_I2C_ROLLBALL; sfp->module_t_wait = T_WAIT_ROLLBALL; } else { switch (id.base.extended_cc) { ... } }static int
sfp_sm_add_mdio_bus(struct sfp *sfp){ int err = 0; if (sfp->mdio_protocol != MDIO_I2C_NONE) err = sfp_i2c_mdiobus_create(sfp); return err; }called from the place you call
sfp_i2c_mdiobus_create(), andsfp_sm_probe_for_phy()becomes:static int
sfp_sm_probe_for_phy(struct sfp *sfp){ int err = 0; switch (sfp->mdio_protocol) { case MDIO_I2C_NONE: break; case MDIO_I2C_MARVELL_C22: err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR, false); break; case MDIO_I2C_C45: err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR, true); break; case MDIO_I2C_ROLLBALL: err = sfp_sm_probe_phy(sfp, SFP_PHY_ADDR_ROLLBALL, true); break; } return err; }
Quoted 8 lines
Quoted 4 lines
This avoids having to add the PHY address, as well as fudge around with id.base.extended_cc to get the PHY probed.
Thoughts?
Hello Russell! For me this solution looks more cleaner. As all those MDIO access protocols are vendor dependent, kernel code should not detect them only from the standard (non-vendor)
extended_ccproperty.
I shall respin this series with this modified, then.
Marek