Skip to contentSkip to conversation

iommu/vt-d: Preset Access/Dirty bits for IOVA over FL

PATCH In review Lu Baolu 2 participants 2 messages Jan 15, 2021 – Jan 28, 2021

Subsystems (2)
lore
Share & tools
lore

Lu Baolu

author maintainer
#0 lore raw

PATCH 1/1 iommu/vt-d: Preset Access/Dirty bits for IOVA over FL

The Access/Dirty bits in the first level page table entry will be set whenever a page table entry was used for address translation or write permission was successfully translated. This is always true when using the first-level page table for kernel IOVA. Instead of wasting hardware cycles to update the certain bits, it's better to set them up at the beginning.

---
 drivers/iommu/intel/iommu.c | 14 ++++++++++++--
 include/linux/intel-iommu.h |  2 ++
 2 files changed, 14 insertions(+), 2 deletions(-)
drivers/iommu/intel/iommu.c +12 -2
index 0ea2e1440a9b..54b8d1bf2009 100644
@@ -1018,8 +1018,11 @@ static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
 
 			domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE);
 			pteval = ((uint64_t)virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE;
-			if (domain_use_first_level(domain))
+			if (domain_use_first_level(domain)) {
 				pteval |= DMA_FL_PTE_XD | DMA_FL_PTE_US;
+				if (domain->domain.type == IOMMU_DOMAIN_DMA)
+					pteval |= DMA_FL_PTE_ACCESS;
+			}
 			if (cmpxchg64(&pte->val, 0ULL, pteval))
 				/* Someone else set it while we were thinking; use theirs. */
 				free_pgtable_page(tmp_page);
@@ -2293,9 +2296,16 @@ __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
 		return -EINVAL;
 
 	attr = prot & (DMA_PTE_READ | DMA_PTE_WRITE | DMA_PTE_SNP);
-	if (domain_use_first_level(domain))
+	if (domain_use_first_level(domain)) {
 		attr |= DMA_FL_PTE_PRESENT | DMA_FL_PTE_XD | DMA_FL_PTE_US;
 
+		if (domain->domain.type == IOMMU_DOMAIN_DMA) {
+			attr |= DMA_FL_PTE_ACCESS;
+			if (prot & DMA_PTE_WRITE)
+				attr |= DMA_FL_PTE_DIRTY;
+		}
+	}
+
 	pteval = ((phys_addr_t)phys_pfn << VTD_PAGE_SHIFT) | attr;
 
 	while (nr_pages > 0) {
include/linux/intel-iommu.h +2 -0
index 65aa963cc115..832730549c52 100644
@@ -42,6 +42,8 @@
 
 #define DMA_FL_PTE_PRESENT	BIT_ULL(0)
 #define DMA_FL_PTE_US		BIT_ULL(2)
+#define DMA_FL_PTE_ACCESS	BIT_ULL(5)
+#define DMA_FL_PTE_DIRTY	BIT_ULL(6)
 #define DMA_FL_PTE_XD		BIT_ULL(63)
 
 #define ADDR_WIDTH_5LEVEL	(57)
Signature · 6 lines
2.25.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
maintainer
#1 lore raw
Quoted 7 lines · Lu Baolu

The Access/Dirty bits in the first level page table entry will be set whenever a page table entry was used for address translation or write permission was successfully translated. This is always true when using the first-level page table for kernel IOVA. Instead of wasting hardware cycles to update the certain bits, it's better to set them up at the beginning.

Quoted 6 lines
---
 drivers/iommu/intel/iommu.c | 14 ++++++++++++--
 include/linux/intel-iommu.h |  2 ++
 2 files changed, 14 insertions(+), 2 deletions(-)

Applied, thanks.
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu