power/reset: remove zte zx driver

From: Arnd Bergmann <[email protected]>

The zte zx platform is getting removed, so this driver is no longer needed.

Cc Jun Nie <[email protected]>

Cc Shawn Guo <[email protected]>

Signed-off-by Arnd Bergmann <[email protected]>

---

 drivers/power/reset/Kconfig     |  7 ---
 drivers/power/reset/Makefile    |  1 -
 drivers/power/reset/zx-reboot.c | 86 ---------------------------------
 3 files changed, 94 deletions(-)
 delete mode 100644 drivers/power/reset/zx-reboot.c

drivers/power/reset/Kconfig +0 -7

index b22c4fdb2561..0376a90bec09 100644
@@ -251,13 +251,6 @@ config POWER_RESET_RMOBILE
 	help
 	  Reboot support for Renesas R-Mobile and SH-Mobile SoCs.
 
-config POWER_RESET_ZX
-	tristate "ZTE SoCs reset driver"
-	depends on ARCH_ZX || COMPILE_TEST
-	depends on HAS_IOMEM
-	help
-	  Reboot support for ZTE SoCs.
-
 config REBOOT_MODE
 	tristate
 

drivers/power/reset/Makefile +0 -1

index 9dc49d3a57ff..46331119c886 100644
@@ -29,7 +29,6 @@ obj-$(CONFIG_POWER_RESET_KEYSTONE) += keystone-reset.o
 obj-$(CONFIG_POWER_RESET_SYSCON) += syscon-reboot.o
 obj-$(CONFIG_POWER_RESET_SYSCON_POWEROFF) += syscon-poweroff.o
 obj-$(CONFIG_POWER_RESET_RMOBILE) += rmobile-reset.o
-obj-$(CONFIG_POWER_RESET_ZX) += zx-reboot.o
 obj-$(CONFIG_REBOOT_MODE) += reboot-mode.o
 obj-$(CONFIG_SYSCON_REBOOT_MODE) += syscon-reboot-mode.o
 obj-$(CONFIG_POWER_RESET_SC27XX) += sc27xx-poweroff.o

drivers/power/reset/zx-reboot.c deleted +0 -86

deleted file mode 100644
index 457950833dba..000000000000
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * ZTE zx296702 SoC reset code
- *
- * Copyright (c) 2015 Linaro Ltd.
- *
- * Author: Jun Nie <[email protected]>
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/notifier.h>
-#include <linux/of_address.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-
-static void __iomem *base;
-static void __iomem *pcu_base;
-
-static int zx_restart_handler(struct notifier_block *this,
-			      unsigned long mode, void *cmd)
-{
-	writel_relaxed(1, base + 0xb0);
-	writel_relaxed(1, pcu_base + 0x34);
-
-	mdelay(50);
-	pr_emerg("Unable to restart system\n");
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block zx_restart_nb = {
-	.notifier_call = zx_restart_handler,
-	.priority = 128,
-};
-
-static int zx_reboot_probe(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	int err;
-
-	base = of_iomap(np, 0);
-	if (!base) {
-		WARN(1, "failed to map base address");
-		return -ENODEV;
-	}
-
-	np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu");
-	pcu_base = of_iomap(np, 0);
-	of_node_put(np);
-	if (!pcu_base) {
-		iounmap(base);
-		WARN(1, "failed to map pcu_base address");
-		return -ENODEV;
-	}
-
-	err = register_restart_handler(&zx_restart_nb);
-	if (err) {
-		iounmap(base);
-		iounmap(pcu_base);
-		dev_err(&pdev->dev, "Register restart handler failed(err=%d)\n",
-			err);
-	}
-
-	return err;
-}
-
-static const struct of_device_id zx_reboot_of_match[] = {
-	{ .compatible = "zte,sysctrl" },
-	{}
-};
-MODULE_DEVICE_TABLE(of, zx_reboot_of_match);
-
-static struct platform_driver zx_reboot_driver = {
-	.probe = zx_reboot_probe,
-	.driver = {
-		.name = "zx-reboot",
-		.of_match_table = zx_reboot_of_match,
-	},
-};
-module_platform_driver(zx_reboot_driver);
-
-MODULE_DESCRIPTION("ZTE SoCs reset driver");
-MODULE_AUTHOR("Jun Nie <[email protected]>");
-MODULE_LICENSE("GPL v2");

Signature · 1 line

2.29.2