can: mcp251xfd: replace sizeof(u32) with val_bytes in regmap
PATCH v4 1/1 can: mcp251xfd: replace sizeof(u32) with val_bytes in regmap
The sizeof(u32) is hardcoded. It's better to use the config value in regmap.
It increases the size of target object, but it's flexible when new mcp chip need other val_bytes.
Signed-off-by Su Yanjun <[email protected]>
--- drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c +6 -3
@@ -1308,6 +1308,7 @@ mcp251xfd_tef_obj_read(const struct mcp251xfd_priv *priv, const u8 offset, const u8 len) {const struct mcp251xfd_tx_ring *tx_ring = priv->tx; +int val_bytes =regmap_get_val_bytes (priv->map_rx); if (IS_ENABLED(CONFIG_CAN_MCP251XFD_SANITY) && (offset > tx_ring->obj_num ||
@@ -1322,7 +1323,7 @@ mcp251xfd_tef_obj_read(const struct mcp251xfd_priv *priv,return regmap_bulk_read (priv->map_rx,mcp251xfd_get_tef_obj_addr (offset), hw_tef_obj, -sizeof (*hw_tef_obj) /sizeof (u32) * len); +sizeof (*hw_tef_obj) / val_bytes * len); }static int mcp251xfd_handle_tefif (struct mcp251xfd_priv *priv)
@@ -1511,11 +1512,12 @@ mcp251xfd_rx_obj_read(const struct mcp251xfd_priv *priv, const u8 offset, const u8 len) { int err; +int val_bytes =regmap_get_val_bytes (priv->map_rx); err =regmap_bulk_read (priv->map_rx,mcp251xfd_get_rx_obj_addr (ring, offset), hw_rx_obj, - len * ring->obj_size /sizeof (u32)); + len * ring->obj_size / val_bytes);return err; }
@@ -2139,6 +2141,7 @@ static irqreturn_t mcp251xfd_irq(int irq, void *dev_id)struct mcp251xfd_priv *priv = dev_id;irqreturn_t handled =IRQ_NONE ;int err; +int val_bytes =regmap_get_val_bytes (priv->map_reg); if (priv->rx_int) do {
@@ -2162,7 +2165,7 @@ static irqreturn_t mcp251xfd_irq(int irq, void *dev_id) err =regmap_bulk_read (priv->map_reg,MCP251XFD_REG_INT , &priv->regs_status,sizeof (priv->regs_status) / -sizeof (u32)); + val_bytes);if (err) goto out_fail;
Signature · 1 line
2.25.1
Marc Kleine-Budde
maintainerQuoted 7 lines · Su Yanjun
The sizeof(u32) is hardcoded. It's better to use the config value in regmap.
It increases the size of target object, but it's flexible when new mcp chip need other
val_bytes.Signed-off-by Su Yanjun <[email protected]>
Applied to linux-can-next/testing.
Thanks,
Marc
Signature · 4 lines
Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung West/Dortmund | Phone: +49-231-2826-924 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |