netdev: move netdev_station_info to diagnostic.h
PATCH v3 1/7 netdev: move netdev_station_info to diagnostic.h
With AP now getting its own diagnostic interface it made sense to move the netdev_station_info struct definition into its own header which eventually can be accompanied by utilities in diagnostic.c. These utilities can then be shared with AP and station as needed.
--- src/diagnostic.h | 49 ++++++++++++++++++++++++++++++++++++++++++++++++ src/netdev.c | 23 ++++++++++++----------- src/netdev.h | 34 ++++----------------------------- src/station.c | 6 ++++-- 4 files changed, 69 insertions(+), 43 deletions(-) create mode 100644 src/diagnostic.h
src/diagnostic.h new file +49 -0
@@ -0,0 +1,49 @@ +/* +* +* Wireless daemon for Linux +* +* Copyright (C) 2020 Intel Corporation. All rights reserved. +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, write to the Free Software +* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +* +*/ + +enum diagnostic_mcs_type { +DIAGNOSTIC_MCS_TYPE_NONE , +DIAGNOSTIC_MCS_TYPE_HT , +DIAGNOSTIC_MCS_TYPE_VHT , +DIAGNOSTIC_MCS_TYPE_HE , +}; + +struct diagnostic_station_info { +uint8_t addr[6 ]; +int8_t cur_rssi; + +enum diagnostic_mcs_type rx_mcs_type; +uint32_t rx_bitrate; +uint8_t rx_mcs; +enum diagnostic_mcs_type tx_mcs_type; +uint32_t tx_bitrate; +uint8_t tx_mcs; + +uint32_t expected_throughput; + +bool have_cur_rssi :1 ; +bool have_rx_mcs :1 ; +bool have_tx_mcs :1 ; +bool have_rx_bitrate :1 ; +bool have_tx_bitrate :1 ; +bool have_expected_throughput :1 ; +};
src/netdev.c +12 -11
@@ -61,6 +61,7 @@#include "src/fils.h" #include "src/auth-proto.h" #include "src/frame-xchg.h" +#include "src/diagnostic.h" #ifndef ENOTSUPP #define ENOTSUPP 524
@@ -369,7 +370,7 @@ int netdev_set_powered(struct netdev *netdev, bool powered, }static bool netdev_parse_bitrate (struct l_genl_attr *attr, -enum netdev_mcs_type *type_out, +enum diagnostic_mcs_type *type_out,uint32_t *rate_out,uint8_t *mcs_out) {
@@ -377,7 +378,7 @@ static bool netdev_parse_bitrate(struct l_genl_attr *attr,const void *data;uint32_t rate =0 ;uint8_t mcs =0 ; -enum netdev_mcs_type mcs_type =NETDEV_MCS_TYPE_NONE ; +enum diagnostic_mcs_type mcs_type =DIAGNOSTIC_MCS_TYPE_NONE ;while (l_genl_attr_next (attr, &type, &len, &data)) {switch (type) {
@@ -394,7 +395,7 @@ static bool netdev_parse_bitrate(struct l_genl_attr *attr,return false; mcs =l_get_u8 (data); - mcs_type =NETDEV_MCS_TYPE_HT ; + mcs_type =DIAGNOSTIC_MCS_TYPE_HT ;break ;
@@ -403,7 +404,7 @@ static bool netdev_parse_bitrate(struct l_genl_attr *attr,return false; mcs =l_get_u8 (data); - mcs_type =NETDEV_MCS_TYPE_VHT ; + mcs_type =DIAGNOSTIC_MCS_TYPE_VHT ;break ;
@@ -412,7 +413,7 @@ static bool netdev_parse_bitrate(struct l_genl_attr *attr,return false; mcs =l_get_u8 (data); - mcs_type =NETDEV_MCS_TYPE_HE ; + mcs_type =DIAGNOSTIC_MCS_TYPE_HE ;break ; }
@@ -424,14 +425,14 @@ static bool netdev_parse_bitrate(struct l_genl_attr *attr, *type_out = mcs_type; *rate_out = rate; -if (mcs_type !=NETDEV_MCS_TYPE_NONE ) +if (mcs_type !=DIAGNOSTIC_MCS_TYPE_NONE ) *mcs_out = mcs;return true; }static bool netdev_parse_sta_info (struct l_genl_attr *attr, -struct netdev_station_info *info) +struct diagnostic_station_info *info) {uint16_t type, len;const void *data;
@@ -458,7 +459,7 @@ static bool netdev_parse_sta_info(struct l_genl_attr *attr, info->have_rx_bitrate = true; -if (info->rx_mcs_type !=NETDEV_MCS_TYPE_NONE ) +if (info->rx_mcs_type !=DIAGNOSTIC_MCS_TYPE_NONE ) info->have_rx_mcs = true;break ;
@@ -474,7 +475,7 @@ static bool netdev_parse_sta_info(struct l_genl_attr *attr, info->have_tx_bitrate = true; -if (info->tx_mcs_type !=NETDEV_MCS_TYPE_NONE ) +if (info->tx_mcs_type !=DIAGNOSTIC_MCS_TYPE_NONE ) info->have_tx_mcs = true;break ;
@@ -511,7 +512,7 @@ static void netdev_rssi_poll_cb(struct l_genl_msg *msg, void *user_data)uint16_t type, len;const void *data;bool found; -struct netdev_station_info info; +struct diagnostic_station_info info;uint8_t prev_rssi_level_idx = netdev->cur_rssi_level_idx; netdev->rssi_poll_cmd_id =0 ;
@@ -4156,7 +4157,7 @@ static void netdev_get_station_cb(struct l_genl_msg *msg, void *user_data)struct l_genl_attr attr, nested;uint16_t type, len;const void *data; -struct netdev_station_info info; +struct diagnostic_station_info info; netdev->get_station_cmd_id =0 ;
src/netdev.h +4 -30
@@ -27,6 +27,7 @@ struct scan_bss;struct handshake_state ;struct eapol_sm ;struct mmpdu_header ; +struct diagnostic_station_info ;enum netdev_result {NETDEV_RESULT_OK ,
@@ -114,36 +115,9 @@ typedef void (*netdev_station_watch_func_t)(struct netdev *netdev, const uint8_t *mac, bool added, void *user_data); -enum netdev_mcs_type { -NETDEV_MCS_TYPE_NONE , -NETDEV_MCS_TYPE_HT , -NETDEV_MCS_TYPE_VHT , -NETDEV_MCS_TYPE_HE , -}; - -struct netdev_station_info { -uint8_t addr[6 ]; -int8_t cur_rssi; - -enum netdev_mcs_type rx_mcs_type; -uint32_t rx_bitrate; -uint8_t rx_mcs; -enum netdev_mcs_type tx_mcs_type; -uint32_t tx_bitrate; -uint8_t tx_mcs; - -uint32_t expected_throughput; - -bool have_cur_rssi :1 ; -bool have_rx_mcs :1 ; -bool have_tx_mcs :1 ; -bool have_rx_bitrate :1 ; -bool have_tx_bitrate :1 ; -bool have_expected_throughput :1 ; -}; - -typedef void (*netdev_get_station_cb_t )(const struct netdev_station_info *info, -void *user_data); +typedef void (*netdev_get_station_cb_t )( +const struct diagnostic_station_info *info, +void *user_data);struct wiphy *netdev_get_wiphy (struct netdev *netdev);const uint8_t *netdev_get_address (struct netdev *netdev);
src/station.c +4 -2
@@ -53,6 +53,7 @@#include "src/netconfig.h" #include "src/anqp.h" #include "src/anqputil.h" +#include "src/diagnostic.h" static struct l_queue *station_list;static uint32_t netdev_watch;
@@ -3455,8 +3456,9 @@ static void station_destroy_interface(void *user_data)station_free (station); } -static void station_get_diagnostic_cb (const struct netdev_station_info *info, -void *user_data) +static void station_get_diagnostic_cb ( +const struct diagnostic_station_info *info, +void *user_data) {struct station *station = user_data;struct l_dbus_message *reply;
Signature · 1 line
2.26.2
PATCH v3 2/7 diagnostic: commonize the building of diagnostic dict
AP mode will use the same structure for its diagnostic interface and mostly the same dictionary keys. Apart from ConnectedBss and Address being different, the remainder are the same so the diagnostic_station_info to DBus dictionary conversion has been made common so both station and AP can use it to build its diagnostic dictionaries.
--- Makefile.am | 1 + src/diagnostic.c | 109 +++++++++++++++++++++++++++++++++++++++++++++++ src/diagnostic.h | 3 ++ 3 files changed, 113 insertions(+) create mode 100644 src/diagnostic.c
v3:
* Moved this into its own file/module
Makefile.am +1 -0
@@ -239,6 +239,7 @@ src_iwd_SOURCES = src/main.c linux/nl80211.h src/iwd.h src/missing.h \ src/frame-xchg.h src/frame-xchg.c \ src/eap-wsc.c src/eap-wsc.h \ src/wscutil.h src/wscutil.c \ + src/diagnostic.h src/diagnostic.c \ $(eap_sources) \ $(builtin_sources)
src/diagnostic.c new file +109 -0
109 lines not on this page · raw message
src/diagnostic.h +3 -0
@@ -47,3 +47,6 @@ struct diagnostic_station_info { bool have_tx_bitrate : 1; bool have_expected_throughput : 1; }; + +bool diagnostic_info_to_dict (const struct diagnostic_station_info *info, +struct l_dbus_message_builder *builder);
Signature · 1 line
2.26.2
PATCH v3 3/7 station: refactor to use diagnostic_info_to_dict
In reply to James Prestwood--- src/station.c | 68 +-------------------------------------------------- 1 file changed, 1 insertion(+), 67 deletions(-)
src/station.c +1 -67
@@ -3463,7 +3463,6 @@ static void station_get_diagnostic_cb(struct station *station = user_data;struct l_dbus_message *reply;struct l_dbus_message_builder *builder; -int16_t rssi;if (!info) { reply =dbus_error_aborted (station->get_station_pending);
@@ -3472,8 +3471,6 @@ static void station_get_diagnostic_cb( reply =l_dbus_message_new_method_return (station->get_station_pending); - rssi = (int16_t )info->cur_rssi; - builder =l_dbus_message_builder_new (reply);l_dbus_message_builder_enter_array (builder,"{sv}" );
@@ -3481,70 +3478,7 @@ static void station_get_diagnostic_cb(dbus_append_dict_basic (builder,"ConnectedBss" ,'s' ,util_address_to_string (info->addr)); -if (info->have_cur_rssi) -dbus_append_dict_basic (builder,"RSSI" ,'n' , &rssi); - -if (info->have_rx_mcs) { -switch (info->rx_mcs_type) { -case NETDEV_MCS_TYPE_HT : -dbus_append_dict_basic (builder,"RxMode" ,'s' , -"802.11n" ); -dbus_append_dict_basic (builder,"RxMCS" ,'y' , - &info->rx_mcs); -break ; -case NETDEV_MCS_TYPE_VHT : -dbus_append_dict_basic (builder,"RxMode" ,'s' , -"802.11ac" ); -dbus_append_dict_basic (builder,"RxMCS" ,'y' , - &info->rx_mcs); -break ; -case NETDEV_MCS_TYPE_HE : -dbus_append_dict_basic (builder,"RxMode" ,'s' , -"802.11ax" ); -dbus_append_dict_basic (builder,"RxMCS" ,'y' , - &info->rx_mcs); -break ; -default : -break ; - } - } - -if (info->have_tx_mcs) { -switch (info->tx_mcs_type) { -case NETDEV_MCS_TYPE_HT : -dbus_append_dict_basic (builder,"TxMode" ,'s' , -"802.11n" ); -dbus_append_dict_basic (builder,"TxMCS" ,'y' , - &info->tx_mcs); -break ; -case NETDEV_MCS_TYPE_VHT : -dbus_append_dict_basic (builder,"TxMode" ,'s' , -"802.11ac" ); -dbus_append_dict_basic (builder,"TxMCS" ,'y' , - &info->tx_mcs); -break ; -case NETDEV_MCS_TYPE_HE : -dbus_append_dict_basic (builder,"TxMode" ,'s' , -"802.11ax" ); -dbus_append_dict_basic (builder,"TxMCS" ,'y' , - &info->tx_mcs); -break ; -default : -break ; - } - } - -if (info->have_tx_bitrate) -dbus_append_dict_basic (builder,"TxBitrate" ,'u' , - &info->tx_bitrate); - -if (info->have_rx_bitrate) -dbus_append_dict_basic (builder,"RxBitrate" ,'u' , - &info->rx_bitrate); - -if (info->have_expected_throughput) -dbus_append_dict_basic (builder,"ExpectedThroughput" ,'u' , - &info->expected_throughput); +diagnostic_info_to_dict (info, builder);l_dbus_message_builder_leave_array (builder);l_dbus_message_builder_finalize (builder);
Signature · 1 line
2.26.2
PATCH v3 4/7 ap: add AP diagnostic interface
In reply to James PrestwoodThis adds a new AccessPointDiagnostic interface. This interface provides similar low level functionality as StationDiagnostic, but for when IWD is in AP mode. This uses netdev_get_all_stations which will dump all stations, parse, and return each station in an individual callback. Once the dump is complete the destroy is called and all data is packaged as an array of dictionaries.
--- src/ap.c | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 91 insertions(+)
src/ap.c +91 -0
@@ -52,6 +52,7 @@#include "src/eap-wsc.h" #include "src/ap.h" #include "src/storage.h" +#include "src/diagnostic.h" struct ap_state {struct netdev *netdev;
@@ -2963,6 +2964,89 @@ static void ap_destroy_interface(void *user_data)l_free (ap_if); } +struct diagnostic_data { +struct l_dbus_message *pending; +struct l_dbus_message_builder *builder; +}; + +static void ap_get_station_cb (const struct diagnostic_station_info *info, +void *user_data) +{ +struct diagnostic_data *data = user_data; + +/* First station info */ +if (!data->builder) { +struct l_dbus_message *reply = +l_dbus_message_new_method_return (data->pending); + + data->builder =l_dbus_message_builder_new (reply); + +l_dbus_message_builder_enter_array (data->builder,"a{sv}" ); + } + +l_dbus_message_builder_enter_array (data->builder,"{sv}" ); +dbus_append_dict_basic (data->builder,"Address" ,'s' , +util_address_to_string (info->addr)); + +diagnostic_info_to_dict (info, data->builder); + +l_dbus_message_builder_leave_array (data->builder); +} + +static void ap_get_station_destroy (void *user_data) +{ +struct diagnostic_data *data = user_data; +struct l_dbus_message *reply; + +if (!data->builder) { + reply =l_dbus_message_new_method_return (data->pending); + + data->builder =l_dbus_message_builder_new (reply); + +l_dbus_message_builder_enter_array (data->builder,"a{sv}" ); + } + +l_dbus_message_builder_leave_array (data->builder); + reply =l_dbus_message_builder_finalize (data->builder); +l_dbus_message_builder_destroy (data->builder); + +dbus_pending_reply (&data->pending, reply); + +l_free (data); +} + +static struct l_dbus_message *ap_dbus_get_diagnostics (struct l_dbus *dbus, +struct l_dbus_message *message,void *user_data) +{ +struct ap_if_data *ap_if = user_data; +struct diagnostic_data *data; +int ret; + + data = l_new(struct diagnostic_data, 1); + data->pending =l_dbus_message_ref (message); + + ret =netdev_get_all_stations (ap_if->ap->netdev, ap_get_station_cb, + data, ap_get_station_destroy); + +if (ret <0 ) { +l_dbus_message_unref (data->pending); +l_free (data); +return dbus_error_from_errno (ret, message); + } + +return NULL ; +} + +static void ap_setup_diagnostic_interface (struct l_dbus_interface *interface) +{ +l_dbus_interface_method (interface,"GetDiagnostics" ,0 , + ap_dbus_get_diagnostics,"aa{sv}" ,"" ,"diagnostic" ); +} + +static void ap_diagnostic_interface_destroy (void *user_data) +{ +} +static void ap_add_interface (struct netdev *netdev) {struct ap_if_data *ap_if;
@@ -2978,12 +3062,16 @@ static void ap_add_interface(struct netdev *netdev)/* setup ap dbus interface */ l_dbus_object_add_interface (dbus_get_bus (),netdev_get_path (netdev),IWD_AP_INTERFACE , ap_if); +l_dbus_object_add_interface (dbus_get_bus (),netdev_get_path (netdev), +IWD_AP_DIAGNOSTIC_INTERFACE , ap_if); }static void ap_remove_interface (struct netdev *netdev) {l_dbus_object_remove_interface (dbus_get_bus (),netdev_get_path (netdev),IWD_AP_INTERFACE ); +l_dbus_object_remove_interface (dbus_get_bus (),netdev_get_path (netdev), +IWD_AP_DIAGNOSTIC_INTERFACE ); } static void ap_netdev_watch(struct netdev *netdev,
@@ -3014,6 +3102,9 @@ static int ap_init(void)l_dbus_register_interface (dbus_get_bus (),IWD_AP_INTERFACE , ap_setup_interface, ap_destroy_interface, false); +l_dbus_register_interface (dbus_get_bus (),IWD_AP_DIAGNOSTIC_INTERFACE , + ap_setup_diagnostic_interface, + ap_diagnostic_interface_destroy, false);/* * Reusing [General].EnableNetworkConfiguration as a switch to enable
Signature · 1 line
2.26.2
PATCH v3 5/7 client: implement diagnostic module
In reply to James PrestwoodFor now this module serves as a helper for printing diagnostic dictionary values. The new API (diagnostic_display) takes a Dbus iterator which has been entered into a dictionary and prints out each key and value. A mapping struct was defined which maps keys to types and units. For simple cases the mapping will consist of a dbus type character and a units string, e.g. dBm, Kbit/s etc. For more complex printing which requires processing the value the 'units' void* cant be set to a function which can be custom written to handle the value.
--- Makefile.am | 3 +- client/diagnostic.c | 166 ++++++++++++++++++++++++++++++++++++++++++++ client/diagnostic.h | 26 +++++++ 3 files changed, 194 insertions(+), 1 deletion(-) create mode 100644 client/diagnostic.c create mode 100644 client/diagnostic.h
v3:
* Moved this into its own file/module
Makefile.am +2 -1
@@ -286,7 +286,8 @@ client_iwctl_SOURCES = client/main.c \ client/known-networks.c \ client/network.h client/network.c \ client/properties.h client/properties.c \ - client/wsc.c client/station.c + client/wsc.c client/station.c \ + client/diagnostic.c client/diagnostic.h client_iwctl_LDADD = $(ell_ldadd) $(READLINE_LIBS) if MANUAL_PAGES
client/diagnostic.c new file +166 -0
166 lines not on this page · raw message
client/diagnostic.h new file +26 -0
@@ -0,0 +1,26 @@ +/* +* +* Wireless daemon for Linux +* +* Copyright (C) 2020 Intel Corporation. All rights reserved. +* +* This library is free software; you can redistribute it and/or +* modify it under the terms of the GNU Lesser General Public +* License as published by the Free Software Foundation; either +* version 2.1 of the License, or (at your option) any later version. +* +* This library is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* Lesser General Public License for more details. +* +* You should have received a copy of the GNU Lesser General Public +* License along with this library; if not, write to the Free Software +* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +* +*/ + +struct l_dbus_message_iter ; + +void diagnostic_display (struct l_dbus_message_iter *dict,const char *margin, +int name_column_width,int value_column_width);
Signature · 1 line
2.26.2
PATCH v3 6/7 client: implement "ap <wlan> show"
In reply to James PrestwoodThis command uses GetDiagnostics to show a list of connected clients and some information about them. The information contained for each connected station nearly maps 1:1 with the station diagnostics information shown in "station <wlan> show" apart from "ConnectedBss" which is now "Address".
--- client/ap.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+)
client/ap.c +49 -0
@@ -30,6 +30,7 @@#include "client/dbus-proxy.h" #include "client/device.h" #include "client/display.h" +#include "client/diagnostic.h" struct ap {bool started;
@@ -189,6 +190,51 @@ static enum cmd_status cmd_stop(const char *device_name, char **argv, int argc)return CMD_STATUS_TRIGGERED ; } +static struct proxy_interface_type ap_diagnostic_interface_type = { + .interface =IWD_AP_DIAGNOSTIC_INTERFACE , +}; + +static void ap_get_diagnostics_callback (struct l_dbus_message *message, +void *user_data) +{ +struct l_dbus_message_iter array; +struct l_dbus_message_iter iter; +uint16_t idx =0 ; +char client_num[15 ]; + +if (dbus_message_has_error (message)) +return ; + +if (!l_dbus_message_get_arguments (message,"aa{sv}" , &array)) { +display ("Failed to parse GetDiagnostics message" ); +return ; + } + +while (l_dbus_message_iter_next_entry (&array, &iter)) { +sprintf (client_num,"Client %u" , idx++); +display_table_header (client_num,"%-*s%-*s" , +20 ,"Property" ,20 ,"Value" ); +diagnostic_display (&iter,"" ,20 ,20 ); +display_table_footer (); + } +} + +static enum cmd_status cmd_show (const char *device_name,char **argv,int argc) +{ +const struct proxy_interface *ap_diagnostic = +device_proxy_find (device_name,IWD_AP_DIAGNOSTIC_INTERFACE ); + +if (!ap_diagnostic) { +display ("No ap on device: '%s'\n" , device_name); +return CMD_STATUS_INVALID_VALUE ; + } + +proxy_interface_method_call (ap_diagnostic,"GetDiagnostics" ,"" , + ap_get_diagnostics_callback); + +return CMD_STATUS_TRIGGERED ; +} +static const struct command ap_commands[] = { {NULL ,"list" ,NULL , cmd_list,"List devices in AP mode" , true }, {"<wlan>" ,"start" ,"<\"network name\"> <passphrase>" , cmd_start,
@@ -196,6 +242,7 @@ static const struct command ap_commands[] = { "name\" with\n\t\t\t\t\t\t a passphrase" }, {"<wlan>" ,"stop" ,NULL , cmd_stop,"Stop a started access\n" "\t\t\t\t\t\t point" }, + { "<wlan", "show", NULL, cmd_show, "Show AP info", false }, { } };
@@ -236,6 +283,7 @@ COMMAND_FAMILY(ap_command_family, ap_command_family_init,static int ap_interface_init (void ) {proxy_interface_type_register (&ap_interface_type); +proxy_interface_type_register (&ap_diagnostic_interface_type);return 0 ; }
@@ -243,6 +291,7 @@ static int ap_interface_init(void)static void ap_interface_exit (void ) {proxy_interface_type_unregister (&ap_interface_type); +proxy_interface_type_unregister (&ap_diagnostic_interface_type); }INTERFACE_TYPE (ap_interface_type, ap_interface_init, ap_interface_exit)
Signature · 1 line
2.26.2
PATCH v3 7/7 client: update station to use diagnostic_display
In reply to James Prestwood--- client/station.c | 50 ++---------------------------------------------- 1 file changed, 2 insertions(+), 48 deletions(-)
client/station.c +2 -48
@@ -31,6 +31,7 @@#include "client/device.h" #include "client/network.h" #include "client/display.h" +#include "client/diagnostic.h" struct station {bool scanning;
@@ -597,8 +598,6 @@ static void get_diagnostics_callback(struct l_dbus_message *message, void *user_data) {struct l_dbus_message_iter iter; -struct l_dbus_message_iter variant; -const char *key;if (dbus_message_has_error (message))return ;
@@ -608,52 +607,7 @@ static void get_diagnostics_callback(struct l_dbus_message *message, goto done; } -while (l_dbus_message_iter_next_entry (&iter, &key, &variant)) { -const char *s_value; -uint32_t u_value; -int16_t i_value; -uint8_t y_value; - -if (!strcmp (key,"ConnectedBss" ) || !strcmp (key,"RxMode" ) || - !strcmp (key,"TxMode" )) { -/* String variants with no special handling */ - -l_dbus_message_iter_get_variant (&variant,"s" , - &s_value); - -display ("%s%*s %-*s%-*s\n" ,MARGIN ,8 ,"" ,20 , - key,47 , s_value); - }else if (!strcmp (key,"RxBitrate" ) || - !strcmp (key,"TxBitrate" )) { -/* Bitrates expressed in 100Kbit/s */ - -l_dbus_message_iter_get_variant (&variant,"u" , - &u_value); -display ("%s%*s %-*s%u Kbit/s\n" ,MARGIN ,8 ,"" ,20 , - key, u_value *100 ); - }else if (!strcmp (key,"ExpectedThroughput" )) { -/* ExpectedThroughput expressed in Kbit/s */ - -l_dbus_message_iter_get_variant (&variant,"u" , - &u_value); -display ("%s%*s %-*s%u Kbit/s\n" ,MARGIN ,8 ,"" ,20 , - key, u_value); - }else if (!strcmp (key,"RSSI" )) { -/* RSSI expressed in dBm */ - -l_dbus_message_iter_get_variant (&variant,"n" , - &i_value); -display ("%s%*s %-*s%i dBm\n" ,MARGIN ,8 ,"" ,20 , - key, i_value); - }else if (!strcmp (key,"RxMCS" ) || !strcmp (key,"TxMCS" )) { -/* MCS index's are single byte integers */ - -l_dbus_message_iter_get_variant (&variant,"y" , - &y_value); -display ("%s%*s %-*s%u\n" ,MARGIN ,8 ,"" ,20 , - key, y_value); - } - } +diagnostic_display (&iter," " ,20 ,20 ); done:/* Finish the table started by cmd_show */
Signature · 1 line
2.26.2