ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-750
PATCH 1/1 ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-750
Re-add the sample-rate quirk originally implemented by Dmitry Panchenko for the DJM-900NXS2 but for the DJM-750. This commit only adds it for the DJM-750 since I can only verify that it is absolutely required for this device. Other models may need this patch but I'm hesitant to add them as I cannot test.
The 'wIndex' is taken from fmt->sync_ep as different devices have a different sync endpoint which is specified in 'quirks-table.h'. Adding other devices should only require adding an additional case.
Signed-off-by Olivia Mackintosh <[email protected]>
--- sound/usb/quirks.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
sound/usb/quirks.c +19 -0
@@ -1470,6 +1470,22 @@ static void set_format_emu_quirk(struct snd_usb_substream *subs, subs->pkt_offset_adj = (emu_samplerate_id >=EMU_QUIRK_SR_176400HZ ) ?4 :0 ; } +static int pioneer_djm_set_format_quirk (struct snd_usb_substream *subs, +const struct audioformat *fmt) +{ +unsigned int cur_rate = subs->data_endpoint->cur_rate; +u8 sr[3 ]; +// Convert to little endian + sr[0 ] = cur_rate&0xff ; + sr[1 ] = (cur_rate>>8 )&0xff ; + sr[2 ] = (cur_rate>>16 )&0xff ; +usb_set_interface (subs->dev,0 ,1 ); +snd_usb_ctl_msg (subs->stream->chip->dev, +usb_rcvctrlpipe (subs->stream->chip->dev,0 ), +0x01 ,0x22 ,0x0100 , fmt->sync_ep, &sr,0x0003 ); +return 0 ; +} +void snd_usb_set_format_quirk (struct snd_usb_substream *subs,const struct audioformat *fmt) {
@@ -1483,6 +1499,9 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,case USB_ID (0x534d ,0x2109 ):/* MacroSilicon MS2109 */ subs->stream_offset_adj =2 ;break ; +case USB_ID (0x08e4 ,0x017f ):/* Pioneer DJM-750 */ +pioneer_djm_set_format_quirk (subs, fmt); +break ; } }
Signature · 1 line
2.30.0