Revert "dmaengine: dw: Enable runtime PM"
Subsystems (2)
PATCH 1/1 Revert "dmaengine: dw: Enable runtime PM"
This reverts commit 842067940a3e3fc008a60fee388e000219b32632. For some solutions e.g. sound/soc/intel/catpt, DW DMA is part of a compound device (in that very example, domains: ADSP, SSP0, SSP1, DMA0 and DMA1 are part of a single entity) rather than being a standalone one. Driver for said device may enlist DMA to transfer data during suspend or resume sequences.
Manipulating RPM explicitly in dw's DMA request and release channel functions causes suspend() to also invoke resume() for the exact same device. Similar situation occurs for resume() sequence. Effectively renders device dysfunctional after first suspend() attempt. Revert the change to address the problem.
--- drivers/dma/dw/core.c | 6 ------ 1 file changed, 6 deletions(-)
drivers/dma/dw/core.c +0 -6
@@ -982,11 +982,8 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan)dev_vdbg (chan2dev (chan),"%s\n" , __func__); -pm_runtime_get_sync (dw->dma.dev); -/* ASSERT: channel is idle */ if (dma_readl (dw,CH_EN ) & dwc->mask) { -pm_runtime_put_sync_suspend (dw->dma.dev);dev_dbg (chan2dev (chan),"DMA channel not idle?\n" );return -EIO ; }
@@ -1003,7 +1000,6 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan)* We need controller-specific data to set up slave transfers. */ if (chan->private && !dw_dma_filter (chan, chan->private)) { -pm_runtime_put_sync_suspend (dw->dma.dev);dev_warn (chan2dev (chan),"Wrong controller-specific data\n" );return -EINVAL ; }
@@ -1047,8 +1043,6 @@ static void dwc_free_chan_resources(struct dma_chan *chan)if (!dw->in_use)do_dw_dma_off (dw); -pm_runtime_put_sync_suspend (dw->dma.dev); -dev_vdbg (chan2dev (chan),"%s: done\n" , __func__); }
Signature · 1 line
2.17.1
Quoted 8 lines · Cezary Rojewski
This reverts commit
842067940a3e3fc008a60fee388e000219b32632. For some solutions e.g.sound/soc/intel/catpt, DW DMA is part of a compound device (in that very example, domains: ADSP, SSP0, SSP1, DMA0 and DMA1 are part of a single entity) rather than being a standalone one. Driver for said device may enlist DMA to transfer data during suspend or resume sequences.
Quoted 5 lines
Manipulating RPM explicitly in dw's DMA request and release channel functions causes
suspend()to also invokeresume()for the exact same device. Similar situation occurs forresume()sequence. Effectively renders device dysfunctional after firstsuspend()attempt. Revert the change to address the problem.
I kinda had the mixed feelings about this, thanks for the report.
Fixes tag?
Quoted 42 lines
Cc Andy Shevchenko <[email protected]>Signed-off-by Cezary Rojewski <[email protected]>--- drivers/dma/dw/core.c | 6 ------ 1 file changed, 6 deletions(-)drivers/dma/dw/core.c +0
-7@@ -982,11 +982,8 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan)dev_vdbg (chan2dev (chan),"%s\n" , __func__); -pm_runtime_get_sync (dw->dma.dev); -/* ASSERT: channel is idle */ if (dma_readl (dw,CH_EN ) & dwc->mask) { -pm_runtime_put_sync_suspend (dw->dma.dev);dev_dbg (chan2dev (chan),"DMA channel not idle?\n" );return -EIO ; }@@ -1003,7 +1000,6 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan)* We need controller-specific data to set up slave transfers. */ if (chan->private && !dw_dma_filter (chan, chan->private)) { -pm_runtime_put_sync_suspend (dw->dma.dev);dev_warn (chan2dev (chan),"Wrong controller-specific data\n" );return -EINVAL ; }@@ -1047,8 +1043,6 @@ static void dwc_free_chan_resources(struct dma_chan *chan)if (!dw->in_use)do_dw_dma_off (dw); -pm_runtime_put_sync_suspend (dw->dma.dev); -dev_vdbg (chan2dev (chan),"%s: done\n" , __func__); } --2.17.1
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 11 lines · Andy Shevchenko
Quoted 8 lines · Cezary Rojewski
This reverts commit
842067940a3e3fc008a60fee388e000219b32632. For some solutions e.g.sound/soc/intel/catpt, DW DMA is part of a compound device (in that very example, domains: ADSP, SSP0, SSP1, DMA0 and DMA1 are part of a single entity) rather than being a standalone one. Driver for said device may enlist DMA to transfer data during suspend or resume sequences.
Quoted 7 lines
Quoted 5 lines
Manipulating RPM explicitly in dw's DMA request and release channel functions causes
suspend()to also invokeresume()for the exact same device. Similar situation occurs forresume()sequence. Effectively renders device dysfunctional after firstsuspend()attempt. Revert the change to address the problem.I kinda had the mixed feelings about this, thanks for the report.
Side note: the better solution in general seems to have a specific power domain for the ASoC multi-function devices (if ever you move to use auxiliary bus, it may be done easier I think).
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 19 lines · Andy Shevchenko
Quoted 17 lines · Andy Shevchenko
Quoted 13 lines · Cezary Rojewski
This reverts commit
842067940a3e3fc008a60fee388e000219b32632. For some solutions e.g.sound/soc/intel/catpt, DW DMA is part of a compound device (in that very example, domains: ADSP, SSP0, SSP1, DMA0 and DMA1 are part of a single entity) rather than being a standalone one. Driver for said device may enlist DMA to transfer data during suspend or resume sequences.Manipulating RPM explicitly in dw's DMA request and release channel functions causes
suspend()to also invokeresume()for the exact same device. Similar situation occurs forresume()sequence. Effectively renders device dysfunctional after firstsuspend()attempt. Revert the change to address the problem.
Quoted 5 lines
Quoted 1 line
I kinda had the mixed feelings about this, thanks for the report.
Side note: the better solution in general seems to have a specific power domain for the ASoC multi-function devices (if ever you move to use auxiliary bus, it may be done easier I think).
This is an area I haven't touched yet. Will definitely check it out.
Thanks for the recommendations, Andy. Much appreciated.
Regards,
Czarek
Quoted 16 lines · Andy Shevchenko
Quoted 8 lines · Cezary Rojewski
This reverts commit
842067940a3e3fc008a60fee388e000219b32632. For some solutions e.g.sound/soc/intel/catpt, DW DMA is part of a compound device (in that very example, domains: ADSP, SSP0, SSP1, DMA0 and DMA1 are part of a single entity) rather than being a standalone one. Driver for said device may enlist DMA to transfer data during suspend or resume sequences.Quoted 5 lines
Manipulating RPM explicitly in dw's DMA request and release channel functions causes
suspend()to also invokeresume()for the exact same device. Similar situation occurs forresume()sequence. Effectively renders device dysfunctional after firstsuspend()attempt. Revert the change to address the problem.
Quoted 4 lines
I kinda had the mixed feelings about this, thanks for the report.
Acked-by Andy Shevchenko <[email protected]>Fixes tag?
Noted, sent v2 with updated tag area.
Thanks,
Czarek