drivers/media/pci/cx18: Fix a spelling minimze to minimize in the file cx18-firmware.c
Subsystems (2)
PATCH 1/1 drivers/media/pci/cx18: Fix a spelling minimze to minimize in the file cx18-firmware.c
s/minimze/minimize/
Signed-off-by Bhaskar Chowdhury <[email protected]>
--- drivers/media/pci/cx18/cx18-firmware.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/pci/cx18/cx18-firmware.c +1 -1
@@ -244,7 +244,7 @@ void cx18_init_power(struct cx18 *cx, int lowpwr)* an error of less than 0.13 ppm which is way, way better than any off * the shelf crystal will have for accuracy anyway. * -* Below I aim to run the PLLs' VCOs near 400 MHz to minimze errors. +* Below I aim to run the PLLs' VCOs near 400 MHz to minimize errors. * * Many thanks to Jeff Campbell and Mike Bradley for their extensive * investigation, experimentation, testing, and suggested solutions of
--
2.30.1
Quoted 4 lines · Bhaskar Chowdhury
s/minimze/minimize/
Signed-off-by Bhaskar Chowdhury <[email protected]>
I was about to Ack this one, but really, all of these tiny cx18 patches should be merged into just one patch.
Quoted 18 lines
--- drivers/media/pci/cx18/cx18-firmware.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/media/pci/cx18/cx18-firmware.c +1
-2@@ -244,7 +244,7 @@ void cx18_init_power(struct cx18 *cx, int lowpwr)* an error of less than 0.13 ppm which is way, way better than any off * the shelf crystal will have for accuracy anyway. * -* Below I aim to run the PLLs' VCOs near 400 MHz to minimze errors. +* Below I aim to run the PLLs' VCOs near 400 MHz to minimize errors. * * Many thanks to Jeff Campbell and Mike Bradley for their extensive * investigation, experimentation, testing, and suggested solutions of --
Signature · 1 line
~Randy
Quoted 9 lines · Randy Dunlap
Quoted 4 lines · Bhaskar Chowdhury
s/minimze/minimize/
Signed-off-by Bhaskar Chowdhury <[email protected]>I was about to Ack this one, but really, all of these tiny cx18 patches should be merged into just one patch.
True,I will keep that in mind, if I come across something like that in future.Thanks for the heads up!
ROFL :) Ingo , showed the way...
Quoted 23 lines
Quoted 9 lines
--- drivers/media/pci/cx18/cx18-firmware.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/media/pci/cx18/cx18-firmware.c +0
-0drivers/media/pci/cx18/cx18-firmware.c void cx18_init_power(struct cx18 *cx, int lowpwr)
Quoted 9 lines
drivers/media/pci/cx18/cx18-firmware.c +1
-2@@ -244,7 +244,7 @@ void cx18_init_power(struct cx18 *cx, int lowpwr)* an error of less than 0.13 ppm which is way, way better than any off * the shelf crystal will have for accuracy anyway. * -* Below I aim to run the PLLs' VCOs near 400 MHz to minimze errors. +* Below I aim to run the PLLs' VCOs near 400 MHz to minimize errors. * * Many thanks to Jeff Campbell and Mike Bradley for their extensive * investigation, experimentation, testing, and suggested solutions of -- --
~Randy