arm64: dts: qcom: Update sc7180-trogdor variants from downstream
Subsystems (4)
v2 cover arm64: dts: qcom: Update sc7180-trogdor variants from downstream
The point of this series is to catch upstream up to what we have downstream in terms of sc7180-trogdor variants. Notably:
- It incorporates minor changes that snuck into the trogdor and lazor device tree files since they were posted upstream.
- It adds the "Limozeen" SKU variant of Lazor.
- It adds support the Pompom and CoachZ type trogdor boards.
This series was tested on the "for-next" Qualcomm tree at commit d242adf2067e ("Merge branch 'arm64-for-5.13' into for-next").
- The patch ("arm64: dts: qcom: sc7180: Use pdc interrupts for USB instead of GIC interrupts") [1] just because it reduced diffs and seemed ready to go.
- The patch ("arm64: dts: qcom: sc7180: Avoid glitching SPI CS at bootup on trogdor") [2] because that's an important bugfix.
With all these changes things are in pretty good shape. Looking at diffs compared to downstream w/ a few patches [3]:
- I haven't tried to resolve "sound" with upstream, instead stripping / leaving as-is any audio related nodes. Someone with more knowledge of the current state of audio needs to take a pass here.
- I haven't tried to resolve DP with upstream. It's basically not there. Someone who works on this: please help!
- We have a downstream patch to manage power for USB hubs. Without that we have to keep power on all the time for USB. Matthias is still working on trying to get an agreement for how that should work.
- Downstream we have an early version of the "sleep stats" driver landed. I believe this is in Maulik's court to re-post.
I have tested this series on "lazor", "lazor-limozeen", "pompom" and "coachz". All of them boot to the web browser with this patch series.
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/20210218145456.1.I1da01a075dd86e005152f993b2d5d82dd9686238@changeid
[3] https://chromium.googlesource.com/chromiumos/third_party/kernel/+log/refs/sandbox/dianders/210225-downstream-dts
Changes in v2:
- Add link to Acked bindings.
- Proper compatible for the "correct" panel (added -ea1 suffix).
- Rebase atop commit 7822de1a2946 ("arm64:...1 for charger temperature")
- Removed "i2c_wlc" as Stephen suggested.
- lazor => trogdor in subject
Abhishek Kumar (1):
arm64: dts: qcom: sc7180: add GO_LAZOR variant property for lazor
Alexandru M Stan (1):
arm64: dts: qcom: sc7180-trogdor: Remove fp control pins in prep for
coachz
Douglas Anderson (6):
arm64: dts: qcom: Move sc7180 MI2S config to board files and make
pulldown
arm64: dts: qcom: Prep sc7180-trogdor trackpad IRQ for new boards
arm64: dts: qcom: Unify the sc7180-trogdor panel nodes
arm64: dts: qcom: Add sc7180-lazor-limozeen skus
arm64: dts: qcom: Add sc7180-trogdor-pompom skus
arm64: dts: qcom: Add sc7180-trogdor-coachz skus
Matthias Kaehlcke (1):
arm64: dts: qcom: sc7180: Set up lazor r3+ as sc7180-lite SKUs
Stephen Boyd (3):
arm64: dts: qcom: sc7180: Update dts for DP phy inside QMP phy
arm64: dts: qcom: trogdor: Only wakeup from pen eject
arm64: dts: qcom: Disable camera clk on sc7180-trogdor devices by
default
Venkata Lakshmi Narayana Gubba (1):
arm64: dts: qcom: sc7180: Remove clock for bluetooth on Trogdor
arch/arm64/boot/dts/qcom/Makefile | 11 + .../dts/qcom/sc7180-trogdor-coachz-r1-lte.dts | 18 ++ .../dts/qcom/sc7180-trogdor-coachz-r1.dts | 154 ++++++++++ .../dts/qcom/sc7180-trogdor-coachz-r2-lte.dts | 18 ++ .../dts/qcom/sc7180-trogdor-coachz-r2.dts | 15 + .../boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 240 +++++++++++++++ .../sc7180-trogdor-lazor-limozeen-nots-r4.dts | 34 +++ .../sc7180-trogdor-lazor-limozeen-nots.dts | 26 ++ .../qcom/sc7180-trogdor-lazor-limozeen.dts | 42 +++ .../dts/qcom/sc7180-trogdor-lazor-r3-kb.dts | 5 +- .../dts/qcom/sc7180-trogdor-lazor-r3-lte.dts | 4 +- .../boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 1 + .../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 39 +-- .../dts/qcom/sc7180-trogdor-pompom-r1-lte.dts | 14 + .../dts/qcom/sc7180-trogdor-pompom-r1.dts | 26 ++ .../dts/qcom/sc7180-trogdor-pompom-r2-lte.dts | 14 + .../dts/qcom/sc7180-trogdor-pompom-r2.dts | 44 +++ .../boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 288 ++++++++++++++++++ .../arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 35 ++- arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 105 +++---- arch/arm64/boot/dts/qcom/sc7180.dtsi | 41 +-- 21 files changed, 1064 insertions(+), 110 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
Signature · 1 line
2.30.1.766.gb4fecdf3b7-goog
PATCH v2 1/13 arm64: dts: qcom: sc7180: Update dts for DP phy inside QMP phy
From: Stephen Boyd <[email protected]>
Drop the old node and add the new one in its place.
---
(no changes since v1)
arch/arm64/boot/dts/qcom/sc7180.dtsi | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)
arch/arm64/boot/dts/qcom/sc7180.dtsi +16 -7
@@ -2770,12 +2770,11 @@ usb_1_hsphy: phy@88e3000 { }; usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sc7180-qmp-usb3-phy"; + compatible = "qcom,sc7180-qmp-usb3-dp-phy"; reg = <0 0x088e9000 0 0x18c>, - <0 0x088e8000 0 0x38>; - reg-names = "reg-base", "dp_com"; + <0 0x088e8000 0 0x38>, + <0 0x088ea000 0 0x40>; status = "disabled"; - #clock-cells = <1>; #address-cells = <2>; #size-cells = <2>; ranges;
@@ -2790,7 +2789,7 @@ usb_1_qmpphy: phy-wrapper@88e9000 { <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { + usb_1_ssphy: usb3-phy@88e9200 { reg = <0 0x088e9200 0 0x128>, <0 0x088e9400 0 0x200>, <0 0x088e9c00 0 0x218>,
@@ -2803,6 +2802,16 @@ usb_1_ssphy: phy@88e9200 { clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eaa00 0 0x200>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>; + #clock-cells = <1>; + #phy-cells = <0>; + }; }; dc_noc: interconnect@9160000 {
@@ -3166,8 +3175,8 @@ dispcc: clock-controller@af00000 { <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&dsi_phy 0>, <&dsi_phy 1>, - <0>, - <0>; + <&dp_phy 0>, + <&dp_phy 1>; clock-names = "bi_tcxo", "gcc_disp_gpll0_clk_src", "dsi0_phy_pll_out_byteclk",
Signature · 1 line
2.30.1.766.gb4fecdf3b7-goog
PATCH v2 2/13 arm64: dts: qcom: Move sc7180 MI2S config to board files and make pulldown
In reply to Douglas AndersonIn general pinconf belongs in board files, not SoC files. Move it to the only current user (trogdor). Also adjust the drive strengths and pulls.
---
This should replace the patch ("Asoc: qcom: dts: Change MI2S GPIO configuration to pulldown") [1].
It can also be noted that on future SoCs we won't have the separate pinconf/pinmux nodes but we're not there yet on sc7180 [2].
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/CAD=FV=WhjvqUau_Jz9ZLFukGUxRqGJTJN+sUt=yv2Q81FRzUWQ@mail.gmail.com
(no changes since v1)
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 24 ++++++++++++++++++++ arch/arm64/boot/dts/qcom/sc7180.dtsi | 18 --------------- 2 files changed, 24 insertions(+), 18 deletions(-)
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +24 -0
@@ -877,6 +877,22 @@ pinconf { }; }; +&pri_mi2s_active { + pinconf { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&pri_mi2s_mclk_active { + pinconf { + pins = "gpio57"; + drive-strength = <2>; + bias-pull-down; + }; +}; + &qspi_cs0 { pinconf { pins = "gpio68";
@@ -1017,6 +1033,14 @@ pinconf-rx { }; }; +&sec_mi2s_active { + pinconf { + pins = "gpio49", "gpio50", "gpio51"; + drive-strength = <2>; + bias-pull-down; + }; +}; + /* PINCTRL - board-specific pinctrl */ &pm6150_gpio {
arch/arm64/boot/dts/qcom/sc7180.dtsi +0 -18
@@ -1856,12 +1856,6 @@ pinmux { pins = "gpio49", "gpio50", "gpio51"; function = "mi2s_1"; }; - - pinconf { - pins = "gpio49", "gpio50", "gpio51"; - drive-strength = <8>; - bias-pull-up; - }; }; pri_mi2s_active: pri-mi2s-active {
@@ -1869,12 +1863,6 @@ pinmux { pins = "gpio53", "gpio54", "gpio55", "gpio56"; function = "mi2s_0"; }; - - pinconf { - pins = "gpio53", "gpio54", "gpio55", "gpio56"; - drive-strength = <8>; - bias-pull-up; - }; }; pri_mi2s_mclk_active: pri-mi2s-mclk-active {
@@ -1882,12 +1870,6 @@ pinmux { pins = "gpio57"; function = "lpass_ext"; }; - - pinconf { - pins = "gpio57"; - drive-strength = <8>; - bias-pull-up; - }; }; sdc1_on: sdc1-on {
Signature · 1 line
2.30.1.766.gb4fecdf3b7-goog
Re: [PATCH v2 02/13] arm64: dts: qcom: Move sc7180 MI2S config to board files and make pulldown
Quoting Douglas Anderson (2021-03-01 13:34:26)
Quoted 11 lines
In general pinconf belongs in board files, not SoC files. Move it to the only current user (trogdor). Also adjust the drive strengths and pulls.
Cc V Sujith Kumar Reddy <[email protected]>Cc Srinivasa Rao Mandadapu <[email protected]>Cc Tzung-Bi Shih <[email protected]>Cc Judy Hsiao <[email protected]>Signed-off-by Douglas Anderson <[email protected]>Reviewed-by Matthias Kaehlcke <[email protected]>---
PATCH v2 3/13 arm64: dts: qcom: Prep sc7180-trogdor trackpad IRQ for new boards
In reply to Douglas AndersonThe trackpad interrupt got renamed and also moved to a new GPIO on newer boards. Let's do the move in the "trogdor.dtsi" file and then undo it in the two old boards.
NOTE: since none of the new boards have device trees yet, this change looks silly on its own but it will make sense after more boards are supported.
---
(no changes since v1)
.../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 14 ++++++++++++++ arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 16 ++++++++++++++++ arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 14 ++++++++------ 3 files changed, 38 insertions(+), 6 deletions(-)
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +14 -0
@@ -58,8 +58,22 @@ ap_ts: touchscreen@10 { }; }; +&trackpad { + interrupts = <58 IRQ_TYPE_EDGE_FALLING>; +}; + /* PINCTRL - modifications to sc7180-trogdor.dtsi */ +&trackpad_int_1v8_odl { + pinmux { + pins = "gpio58"; + }; + + pinconf { + pins = "gpio58"; + }; +}; + &ts_reset_l { pinconf { /* This pin is not connected on -rev0, pull up to park. */
arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +16 -0
@@ -68,6 +68,22 @@ &sdhc_2 { status = "okay"; }; +&trackpad { + interrupts = <58 IRQ_TYPE_EDGE_FALLING>; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&trackpad_int_1v8_odl { + pinmux { + pins = "gpio58"; + }; + + pinconf { + pins = "gpio58"; + }; +}; + /* PINCTRL - board-specific pinctrl */ &tlmm {
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +8 -6
@@ -644,14 +644,14 @@ ap_tp_i2c: &i2c7 { status = "okay"; clock-frequency = <400000>; - trackpad@15 { + trackpad: trackpad@15 { compatible = "elan,ekth3000"; reg = <0x15>; pinctrl-names = "default"; - pinctrl-0 = <&trackpad_int_1v8_odl>; + pinctrl-0 = <&tp_int_odl>; interrupt-parent = <&tlmm>; - interrupts = <58 IRQ_TYPE_EDGE_FALLING>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; vcc-supply = <&pp3300_fp_tp>;
@@ -1412,14 +1412,16 @@ pinconf-rx { }; }; - trackpad_int_1v8_odl: trackpad-int-1v8-odl { + /* Named trackpad_int_1v8_odl on earlier revision schematics */ + trackpad_int_1v8_odl: + tp_int_odl: tp-int-odl { pinmux { - pins = "gpio58"; + pins = "gpio0"; function = "gpio"; }; pinconf { - pins = "gpio58"; + pins = "gpio0"; /* Has external pullup */ bias-disable;
Signature · 1 line
2.30.1.766.gb4fecdf3b7-goog
Re: [PATCH v2 03/13] arm64: dts: qcom: Prep sc7180-trogdor trackpad IRQ for new boards
Quoting Douglas Anderson (2021-03-01 13:34:27)
Quoted 11 lines
The trackpad interrupt got renamed and also moved to a new GPIO on newer boards. Let's do the move in the "
trogdor.dtsi" file and then undo it in the two old boards.NOTE: since none of the new boards have device trees yet, this change looks silly on its own but it will make sense after more boards are supported.
Signed-off-by Douglas Anderson <[email protected]>Reviewed-by Matthias Kaehlcke <[email protected]>---
PATCH v2 4/13 arm64: dts: qcom: Unify the sc7180-trogdor panel nodes
In reply to Douglas AndersonLet's avoid a bit of duplication by pushing this up to the trogdor.dtsi file.
---
(no changes since v1)
.../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 21 ++++--------------- .../arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 19 ++++------------- arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 15 +++++++++++++ 3 files changed, 23 insertions(+), 32 deletions(-)
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +4 -17
@@ -12,23 +12,6 @@ #include "sc7180-trogdor.dtsi" -/ { - panel: panel { - compatible = "boe,nv133fhm-n62"; - power-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; - - ports { - port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; - }; -}; - &ap_sar_sensor { semtech,cs0-ground; semtech,combined-sensors = <3>;
@@ -58,6 +41,10 @@ ap_ts: touchscreen@10 { }; }; +&panel { + compatible = "boe,nv133fhm-n62"; +}; + &trackpad { interrupts = <58 IRQ_TYPE_EDGE_FALLING>; };
arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +4 -15
@@ -17,21 +17,6 @@ / { model = "Google Trogdor (rev1+)"; compatible = "google,trogdor", "qcom,sc7180"; - - panel: panel { - compatible = "auo,b116xa01"; - power-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; - - ports { - port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; - }; - }; - }; }; ap_ts_pen_1v8: &i2c4 {
@@ -53,6 +38,10 @@ ap_ts: touchscreen@10 { }; }; +&panel { + compatible = "auo,b116xa01"; +}; + &pp3300_hub { /* pp3300_l7c is used to power the USB hub */ /delete-property/regulator-always-on;
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +15 -0
@@ -257,6 +257,21 @@ max98357a: audio-codec-0 { #sound-dai-cells = <0>; }; + panel: panel { + /* Compatible will be filled in per-board */ + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + ports { + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + pwmleds { compatible = "pwm-leds"; keyboard_backlight: keyboard-backlight {
Signature · 1 line
2.30.1.766.gb4fecdf3b7-goog
Re: [PATCH v2 04/13] arm64: dts: qcom: Unify the sc7180-trogdor panel nodes
Quoting Douglas Anderson (2021-03-01 13:34:28)
Quoted 6 lines
Let's avoid a bit of duplication by pushing this up to the
trogdor.dtsifile.Signed-off-by Douglas Anderson <[email protected]>Reviewed-by Matthias Kaehlcke <[email protected]>---
PATCH v2 5/13 arm64: dts: qcom: trogdor: Only wakeup from pen eject
In reply to Douglas AndersonFrom: Stephen Boyd <[email protected]>
Configure the pen to be a wakeup source only when the pen is ejected instead of both when the pen is ejected and inserted. This corresponds to wake source requirements.
---
(no changes since v1)
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +2 -0
@@ -6,6 +6,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -245,6 +246,7 @@ pen_insert: pen-insert { gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; linux,code = <SW_PEN_INSERTED>; linux,input-type = <EV_SW>; + wakeup-event-action = <EV_ACT_DEASSERTED>; wakeup-source; }; };
Signature · 1 line
2.30.1.766.gb4fecdf3b7-goog
PATCH v2 6/13 arm64: dts: qcom: Disable camera clk on sc7180-trogdor devices by default
In reply to Douglas AndersonFrom: Stephen Boyd <[email protected]>
We only want to use this clk driver on CoachZ devices. Disable it for all other Trogdor boards. NOTE: CoachZ devices aren't yet supported upstream so until it is this is just disabled for all trogdor.
---
(no changes since v1)
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +4 -0
@@ -570,6 +570,10 @@ cr50: tpm@0 { }; }; +&camcc { + status = "disabled"; +}; + &dsi0 { status = "okay"; vdda-supply = <&vdda_mipi_dsi0_1p2>;
Signature · 1 line
2.30.1.766.gb4fecdf3b7-goog
PATCH v2 7/13 arm64: dts: qcom: sc7180-trogdor: Remove fp control pins in prep for coachz
In reply to Douglas AndersonFrom: Alexandru M Stan <[email protected]>
Removed the pinctrl and pin{mux,conf} for the control pins because:
1. The only need for them is for userspace control via flash_fp_mcu
2. cros-ec doesn't know what to do with them, and even if it did, it would interfere with flash_fp_mcu at the most inopportune times
Since we're not using hogs, we rely on AP firmware to set all the control pins correctly.
Reviewed-by; Matthias Kaehlcke <[email protected]>
---
(no changes since v1)
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 45 +------------------- 1 file changed, 1 insertion(+), 44 deletions(-)
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +1 -44
@@ -810,7 +810,7 @@ cros_ec_fp: ec@0 { interrupt-parent = <&tlmm>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>, <&fpmcu_sel>; + pinctrl-0 = <&fp_to_ap_irq_l>; spi-max-frequency = <3000000>; }; };
@@ -1235,48 +1235,6 @@ pinconf { }; }; - fpmcu_boot0: fpmcu-boot0 { - pinmux { - pins = "gpio10"; - function = "gpio"; - }; - - pinconf { - pins = "gpio10"; - bias-disable; - drive-strength = <2>; - output-low; - }; - }; - - fpmcu_sel: fpmcu-sel { - pinmux { - pins = "gpio22"; - function = "gpio"; - }; - - pinconf { - pins = "gpio22"; - bias-disable; - drive-strength = <2>; - output-high; - }; - }; - - fp_rst_l: fp-rst-l { - pinmux { - pins = "gpio5"; - function = "gpio"; - }; - - pinconf { - pins = "gpio5"; - bias-disable; - drive-strength = <2>; - output-high; - }; - }; - fp_to_ap_irq_l: fp-to-ap-irq-l { pinmux { pins = "gpio4";
@@ -1292,7 +1250,6 @@ pinconf { }; }; - h1_ap_int_odl: h1-ap-int-odl { pinmux { pins = "gpio42";
Signature · 1 line
2.30.1.766.gb4fecdf3b7-goog
Re: [PATCH v2 07/13] arm64: dts: qcom: sc7180-trogdor: Remove fp control pins in prep for coachz
Quoting Douglas Anderson (2021-03-01 13:34:31)
Quoted 10 lines
From: Alexandru M Stan <[email protected]>
Removed the pinctrl and pin{mux,conf} for the control pins because:
1. The only need for them is for userspace control viaflash_fp_mcu
2. cros-ec doesn't know what to do with them, and even if it did, it would interfere withflash_fp_mcuat the most inopportune timesSince we're not using hogs, we rely on AP firmware to set all the control pins correctly.
Quoted 7 lines
Cc Stephen Boyd <[email protected]>Cc Craig Hesling <[email protected]>Signed-off-by Alexandru M Stan <[email protected]>[dianders: adjusted since coachz isn't upstream yet]Reviewed-by; Matthias Kaehlcke <[email protected]>
Signed-off-by Douglas Anderson <[email protected]>---
PATCH v2 8/13 arm64: dts: qcom: sc7180: Remove clock for bluetooth on Trogdor
In reply to Douglas AndersonFrom: Venkata Lakshmi Narayana Gubba <[email protected]>
Removed voting for RPMH_RF_CLK2 which is not required as it is getting managed by BT SoC through SW_CTRL line.
---
(no changes since v1)
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 1 - 1 file changed, 1 deletion(-)
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +0 -1
@@ -835,7 +835,6 @@ bluetooth: bluetooth { vddrf-supply = <&pp1300_l2c>; vddch0-supply = <&pp3300_l10c>; max-speed = <3200000>; - clocks = <&rpmhcc RPMH_RF_CLK2>; }; };
Signature · 1 line
2.30.1.766.gb4fecdf3b7-goog
Re: [PATCH v2 08/13] arm64: dts: qcom: sc7180: Remove clock for bluetooth on Trogdor
Quoting Douglas Anderson (2021-03-01 13:34:32)
Quoted 10 lines
From: Venkata Lakshmi Narayana Gubba <[email protected]>
Removed voting for
RPMH_RF_CLK2which is not required as it is getting managed by BT SoC throughSW_CTRLline.Cc Matthias Kaehlcke <[email protected]>Signed-off-by Venkata Lakshmi Narayana Gubba <[email protected]>Signed-off-by Douglas Anderson <[email protected]>Reviewed-by Matthias Kaehlcke <[email protected]>---
PATCH v2 9/13 arm64: dts: qcom: sc7180: add GO_LAZOR variant property for lazor
In reply to Douglas AndersonFrom: Abhishek Kumar <[email protected]>
For trogdor, in the latest board-2.bin file, new BDF with variant name GO_LAZOR has been introduced, so we need this property set, for GO_LAZOR BDF to be picked.
---
(no changes since v1)
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +4 -0
@@ -49,6 +49,10 @@ &trackpad { interrupts = <58 IRQ_TYPE_EDGE_FALLING>; }; +&wifi { + qcom,ath10k-calibration-variant = "GO_LAZOR"; +}; + /* PINCTRL - modifications to sc7180-trogdor.dtsi */ &trackpad_int_1v8_odl {
Signature · 1 line
2.30.1.766.gb4fecdf3b7-goog
Re: [PATCH v2 09/13] arm64: dts: qcom: sc7180: add GO_LAZOR variant property for lazor
Quoting Douglas Anderson (2021-03-01 13:34:33)
Quoted 6 lines
From: Abhishek Kumar <[email protected]>
For trogdor, in the latest board-2.bin file, new BDF with variant name
GO_LAZORhas been introduced, so we need this property set, forGO_LAZORBDF to be picked.
Quoted 6 lines
Cc Philip Chen <[email protected]>Signed-off-by Abhishek Kumar <[email protected]>[dianders: adjusted subject line and sort order]Signed-off-by Douglas Anderson <[email protected]>Reviewed-by Matthias Kaehlcke <[email protected]>---
PATCH v2 10/13 arm64: dts: qcom: sc7180: Set up lazor r3+ as sc7180-lite SKUs
In reply to Douglas AndersonFrom: Matthias Kaehlcke <[email protected]>
Lazor rev3 and later use the 'lite' version of the SC7180 SoC.
---
(no changes since v1)
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts | 5 ++++- arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts | 4 +++- arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 1 + 3 files changed, 8 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts +4 -1
@@ -5,7 +5,10 @@ * Copyright 2020 Google LLC. */ -#include "sc7180-trogdor-lazor-r3.dts" +/dts-v1/; + +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-lite.dtsi" / { model = "Google Lazor (rev3+) with KB Backlight";
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts +3 -1
@@ -5,7 +5,9 @@ * Copyright 2020 Google LLC. */ -#include "sc7180-trogdor-lazor-r3.dts" +/dts-v1/; + +#include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" / {
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts +1 -0
@@ -8,6 +8,7 @@ /dts-v1/; #include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-lite.dtsi" / { model = "Google Lazor (rev3+)";
Signature · 1 line
2.30.1.766.gb4fecdf3b7-goog
Re: [PATCH v2 10/13] arm64: dts: qcom: sc7180: Set up lazor r3+ as sc7180-lite SKUs
Quoting Douglas Anderson (2021-03-01 13:34:34)
Quoted 9 lines
From: Matthias Kaehlcke <[email protected]>
Lazor rev3 and later use the 'lite' version of the SC7180 SoC.
Cc Stephen Boyd <[email protected]>Signed-off-by Matthias Kaehlcke <[email protected]>[dianders: Adjust commit message which referred to downstream history]Signed-off-by Douglas Anderson <[email protected]>---
PATCH v2 11/13 arm64: dts: qcom: Add sc7180-lazor-limozeen skus
In reply to Douglas AndersonThis is a SKU variant of lazor. Add it. This squashes the downstream patches to support this hardware.
NOTES:
- The non-touch SKU actually has "innolux,n116bca-ea1" but that driver is still pending in simple-panel. The bindings have been Acked though [1]. Things work well enough with the "innolux,n116bge" timings for now, though.
- The wonky special dts just for "-rev4" arguably doesn't need to go upstream since they weren't widely distributed, but since a few people have them we might as well. If it ever causes problems we can delete it.
[1] https://lore.kernel.org/r/20210115144345.v2.4.I6889e21811df6adaff5c5b8a8c80fda0669ab3a5@changeid
---
Changes in v2:
- Add link to Acked bindings.
- Proper compatible for the "correct" panel (added -ea1 suffix).
arch/arm64/boot/dts/qcom/Makefile | 3 ++ .../sc7180-trogdor-lazor-limozeen-nots-r4.dts | 34 +++++++++++++++ .../sc7180-trogdor-lazor-limozeen-nots.dts | 26 ++++++++++++ .../qcom/sc7180-trogdor-lazor-limozeen.dts | 42 +++++++++++++++++++ 4 files changed, 105 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dts
arch/arm64/boot/dts/qcom/Makefile +3 -0
@@ -38,6 +38,9 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-kb.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts new file +34 -0
@@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-lazor-limozeen-nots.dts" + +/ { + model = "Google Lazor Limozeen without Touchscreen (rev4)"; + compatible = "google,lazor-rev4-sku5", "qcom,sc7180"; +}; + +/* + * rev4-sku5 was built with a different trackpad. + */ +/delete-node/&trackpad; +&ap_tp_i2c { + trackpad: trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <58 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pp3300_fp_tp>; + hid-descr-addr = <0x20>; + + wakeup-source; + }; +};
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots.dts new file +26 -0
@@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor Limozeen board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-lazor.dtsi" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor Limozeen without Touchscreen"; + compatible = "google,lazor-sku6", "google,lazor-sku5", "qcom,sc7180"; +}; + +/delete-node/&ap_ts; + +&panel { + compatible = "innolux,n116bca-ea1", "innolux,n116bge"; +}; + +&sdhc_2 { + status = "okay"; +};
arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen.dts new file +42 -0
42 lines not on this page · raw message
Signature · 1 line
2.30.1.766.gb4fecdf3b7-goog
Re: [PATCH v2 11/13] arm64: dts: qcom: Add sc7180-lazor-limozeen skus
Quoting Douglas Anderson (2021-03-01 13:34:35)
Quoted 13 lines
This is a SKU variant of lazor. Add it. This squashes the downstream patches to support this hardware.
NOTES:
- The non-touch SKU actually has "innolux,n116bca-ea1" but that driver is still pending in simple-panel. The bindings have been Acked though [1]. Things work well enough with the "innolux,n116bge" timings for now, though.
- The wonky special dts just for "-rev4" arguably doesn't need to go upstream since they weren't widely distributed, but since a few people have them we might as well. If it ever causes problems we can delete it.
Quoted 6 lines
[1] https://lore.kernel.org/r/20210115144345.v2.4.I6889e21811df6adaff5c5b8a8c80fda0669ab3a5@changeid
Cc Stephen Boyd <[email protected]>Signed-off-by Douglas Anderson <[email protected]>Reviewed-by Matthias Kaehlcke <[email protected]>---
PATCH v2 12/13 arm64: dts: qcom: Add sc7180-trogdor-pompom skus
In reply to Douglas AndersonThis is a trogdor variant. This is mostly a grab from the downstream tree with notable exceptions:
- I skip -rev0. This was a super early build and there's no advantage of long term support.
- In -rev1 I translate the handling of the USB hub like is done for similar boards. See the difference between the downstream and upstream 'sc7180-trogdor-lazor-r0.dts' for an example. This will need to be resolved when proper support for the USB hub is figured out upstream.
- I remove sound node since sound hasn't landed upstream yet.
- In incorporate the pending <https://crrev.com/c/2719075> for the keyboard.
---
Changes in v2:
- Rebase atop commit 7822de1a2946 ("arm64:...1 for charger temperature")
- lazor => trogdor in subject
arch/arm64/boot/dts/qcom/Makefile | 4 + .../dts/qcom/sc7180-trogdor-pompom-r1-lte.dts | 14 + .../dts/qcom/sc7180-trogdor-pompom-r1.dts | 26 ++ .../dts/qcom/sc7180-trogdor-pompom-r2-lte.dts | 14 + .../dts/qcom/sc7180-trogdor-pompom-r2.dts | 44 +++ .../boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 288 ++++++++++++++++++ 6 files changed, 390 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
arch/arm64/boot/dts/qcom/Makefile +4 -0
@@ -41,6 +41,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dts new file +14 -0
@@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-pompom-r1.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pompom (rev1) with LTE"; + compatible = "google,pompom-rev1-sku0", "qcom,sc7180"; +};
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts new file +26 -0
@@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-pompom.dtsi" + +/ { + model = "Google Pompom (rev1)"; + compatible = "google,pompom-rev1", "qcom,sc7180"; +}; + +&pp3300_hub { + /* pp3300_l7c is used to power the USB hub */ + /delete-property/regulator-always-on; + /delete-property/regulator-boot-on; +}; + +&pp3300_l7c { + regulator-always-on; + regulator-boot-on; +};
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts new file +14 -0
@@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Pompom board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-pompom-r2.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Pompom (rev2+) with LTE"; + compatible = "google,pompom-sku0", "qcom,sc7180"; +};
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts new file +44 -0
44 lines not on this page · raw message
arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi new file +288 -0
288 lines not on this page · raw message
Signature · 1 line
2.30.1.766.gb4fecdf3b7-goog
Re: [PATCH v2 12/13] arm64: dts: qcom: Add sc7180-trogdor-pompom skus
Quoting Douglas Anderson (2021-03-01 13:34:36)
Quoted 13 lines
This is a trogdor variant. This is mostly a grab from the downstream tree with notable exceptions:
- I skip -rev0. This was a super early build and there's no advantage of long term support.
- In -rev1 I translate the handling of the USB hub like is done for similar boards. See the difference between the downstream and upstream 'sc7180-trogdor-lazor-r0.dts' for an example. This will need to be resolved when proper support for the USB hub is figured out upstream.
- I remove sound node since sound hasn't landed upstream yet.
- In incorporate the pending <https://crrev.com/c/2719075> for the keyboard.
Quoted 8 lines
Cc Philip Chen <[email protected]>Cc Matthias Kaehlcke <[email protected]>Cc Stephen Boyd <[email protected]>Cc Tzung-Bi Shih <[email protected]>Cc Judy Hsiao <[email protected]>Signed-off-by Douglas Anderson <[email protected]>Reviewed-by Matthias Kaehlcke <[email protected]>---
PATCH v2 13/13 arm64: dts: qcom: Add sc7180-trogdor-coachz skus
In reply to Douglas AndersonThis is a trogdor variant. This is mostly a grab from the downstream tree with notable exceptions:
- I skip -rev0. This was a super early build and there's no advantage of long term support.
- I remove sound node since sound hasn't landed upstream yet.
---
NOTE: technically the "google,cros-ec-mkbp-proximity" binding hasn't landed upstream yet. However it has a Reviewed-by from Rob and the series in general sounds about ready to land. If necessary it can be removed / readded later.
Changes in v2:
- Removed "i2c_wlc" as Stephen suggested.
- lazor => trogdor in subject
arch/arm64/boot/dts/qcom/Makefile | 4 + .../dts/qcom/sc7180-trogdor-coachz-r1-lte.dts | 18 ++ .../dts/qcom/sc7180-trogdor-coachz-r1.dts | 154 +++++++++++ .../dts/qcom/sc7180-trogdor-coachz-r2-lte.dts | 18 ++ .../dts/qcom/sc7180-trogdor-coachz-r2.dts | 15 ++ .../boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 240 ++++++++++++++++++ 6 files changed, 449 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
arch/arm64/boot/dts/qcom/Makefile +4 -0
@@ -31,6 +31,10 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r2-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb
arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts new file +18 -0
@@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google CoachZ board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-coachz-r1.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google CoachZ (rev1) with LTE"; + compatible = "google,coachz-rev1-sku0", "qcom,sc7180"; +}; + +&cros_ec_proximity { + label = "proximity-wifi-lte"; +};
arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts new file +154 -0
154 lines not on this page · raw message
arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2-lte.dts new file +18 -0
@@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google CoachZ board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-coachz-r2.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google CoachZ (rev2+) with LTE"; + compatible = "google,coachz-sku0", "qcom,sc7180"; +}; + +&cros_ec_proximity { + label = "proximity-wifi-lte"; +};
arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r2.dts new file +15 -0
@@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google CoachZ board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-coachz.dtsi" + +/ { + model = "Google CoachZ (rev2+)"; + compatible = "google,coachz", "qcom,sc7180"; +};
arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi new file +240 -0
240 lines not on this page · raw message
Signature · 1 line
2.30.1.766.gb4fecdf3b7-goog
Re: [PATCH v2 13/13] arm64: dts: qcom: Add sc7180-trogdor-coachz skus
Quoting Douglas Anderson (2021-03-01 13:34:37)
Quoted 6 lines
This is a trogdor variant. This is mostly a grab from the downstream tree with notable exceptions:
- I skip -rev0. This was a super early build and there's no advantage of long term support.
- I remove sound node since sound hasn't landed upstream yet.
Quoted 8 lines
Cc Gwendal Grignou <[email protected]>Cc Matthias Kaehlcke <[email protected]>Cc Stephen Boyd <[email protected]>Cc Tzung-Bi Shih <[email protected]>Cc Judy Hsiao <[email protected]>Signed-off-by Douglas Anderson <[email protected]>Reviewed-by Matthias Kaehlcke <[email protected]>---
This series was applied to qcom/linux.git (refs/heads/for-next):
Hello:
This series was applied to qcom/linux.git (refs/heads/for-next):
Quoted 8 lines · On Mon, 1 Mar 2021 13:34:24 -0800 you wrote:
The point of this series is to catch upstream up to what we have downstream in terms of sc7180-trogdor variants. Notably:
- It incorporates minor changes that snuck into the trogdor and lazor device tree files since they were posted upstream.
- It adds the "Limozeen" SKU variant of Lazor.
- It adds support the Pompom and CoachZ type trogdor boards.[...]
Here is the summary with links:
- [v2,01/13] arm64: dts: qcom: sc7180: Update dts for DP phy inside QMP phy
https://git.kernel.org/qcom/c/466952306ea6 - [v2,02/13] arm64: dts: qcom: Move sc7180 MI2S config to board files and make pulldown https://git.kernel.org/qcom/c/64aefe7aaef7 - [v2,03/13] arm64: dts: qcom: Prep sc7180-trogdor trackpad IRQ for new boards https://git.kernel.org/qcom/c/e1120b906c22 - [v2,04/13] arm64: dts: qcom: Unify the sc7180-trogdor panel nodes https://git.kernel.org/qcom/c/bc6d6c2185de - [v2,05/13] arm64: dts: qcom: trogdor: Only wakeup from pen eject https://git.kernel.org/qcom/c/93d6bbdbafbf - [v2,06/13] arm64: dts: qcom: Disable camera clk on sc7180-trogdor devices by default https://git.kernel.org/qcom/c/1e7f50e04f18 - [v2,07/13] arm64: dts: qcom: sc7180-trogdor: Remove fp control pins in prep for coachz https://git.kernel.org/qcom/c/db97900a0165 - [v2,08/13] arm64: dts: qcom: sc7180: Remove clock for bluetooth on Trogdor https://git.kernel.org/qcom/c/6ba57fcce536 - [v2,09/13] arm64: dts: qcom: sc7180: add GO_LAZOR variant property for lazor https://git.kernel.org/qcom/c/42f9a4a21ecb - [v2,10/13] arm64: dts: qcom: sc7180: Set up lazor r3+ as sc7180-lite SKUs https://git.kernel.org/qcom/c/ad40a8b8ebb2 - [v2,11/13] arm64: dts: qcom: Add sc7180-lazor-limozeen skus https://git.kernel.org/qcom/c/08f08ce1932b - [v2,12/13] arm64: dts: qcom: Add sc7180-trogdor-pompom skus https://git.kernel.org/qcom/c/e218fbeb63e2 - [v2,13/13] arm64: dts: qcom: Add sc7180-trogdor-coachz skus https://git.kernel.org/qcom/c/5cc369178b3a
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html