mtd: core: add nvmem-cells compatible to parse mtd as nvmem cells
Subsystems (2)
PATCH v3 1/2 mtd: core: add nvmem-cells compatible to parse mtd as nvmem cells
Partitions that contains the nvmem-cells compatible will register their direct subonodes as nvmem cells and the node will be treated as a nvmem provider.
---
Depends on [PATCH] mtd: parsers: ofpart: limit parsing of deprecated DT syntax
--- drivers/mtd/mtdcore.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/mtd/mtdcore.c +2 -1
@@ -531,6 +531,7 @@ static int mtd_nvmem_reg_read(void *priv, unsigned int offset,static int mtd_nvmem_add (struct mtd_info *mtd) { +struct device_node *node =mtd_get_of_node (mtd);struct nvmem_config config = {}; config.id =-1 ;
@@ -543,7 +544,7 @@ static int mtd_nvmem_add(struct mtd_info *mtd) config.stride =1 ; config.read_only = true; config.root_only = true; - config.no_of_node = true; + config.no_of_node = !of_device_is_compatible (node,"nvmem-cells" ); config.priv = mtd; mtd->nvmem =nvmem_register (&config);
Signature · 1 line
2.30.0
PATCH v3 2/2 dt-bindings: mtd: Document use of nvmem-cells compatible
Document nvmem-cells compatible used to treat mtd partitions as a nvmem provider.
--- .../bindings/mtd/partitions/nvmem-cells.yaml | 105 ++++++++++++++++++ 1 file changed, 105 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml
Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml new file +105 -0
@@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/nvmem-cells.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nvmem cells + +description: | + This binding can be used to treat the specific partition as a nvmem provider. + Each direct subnodes represents the nvmem cells and won't be parsed as fixed-partitions. + Fixed-partitions bindings described in fixed-partitions.yaml apply to the nvmem provider node. + +maintainers: + - Ansuel Smith <[email protected]> + +properties: + compatible: + const: nvmem-cells + + "#address-cells": true + + "#size-cells": true + + reg: + description: partition offset and size within the flash + maxItems: 1 + +required: + - compatible + - "#address-cells" + - "#size-cells" + - reg + +additionalProperties: true + +examples: + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* ... */ + + }; + art: art@1200000 { + compatible = "nvmem-cells"; + reg = <0x1200000 0x0140000>; + label = "art"; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_gmac1: macaddr_gmac1@0 { + reg = <0x0 0x6>; + }; + + macaddr_gmac2: macaddr_gmac2@6 { + reg = <0x6 0x6>; + }; + + pre_cal_24g: pre_cal_24g@1000 { + reg = <0x1000 0x2f20>; + }; + + pre_cal_5g: pre_cal_5g@5000{ + reg = <0x5000 0x2f20>; + }; + }; + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x000000 0x100000>; + read-only; + }; + + firmware@100000 { + compatible = "brcm,trx"; + label = "firmware"; + reg = <0x100000 0xe00000>; + }; + + calibration@f00000 { + compatible = "nvmem-cells"; + label = "calibration"; + reg = <0xf00000 0x100000>; + ranges = <0 0xf00000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + + wifi0@0 { + reg = <0x000000 0x080000>; + }; + + wifi1@80000 { + reg = <0x080000 0x080000>; + }; + }; + };
Signature · 1 line
2.30.0
Rob Herring
maintainerRe: [PATCH v3 2/2] dt-bindings: mtd: Document use of nvmem-cells compatible
Quoted 21 lines · Ansuel Smith
Document nvmem-cells compatible used to treat mtd partitions as a nvmem provider.
Signed-off-by Ansuel Smith <[email protected]>--- .../bindings/mtd/partitions/nvmem-cells.yaml | 105 ++++++++++++++++++ 1 file changed, 105 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yamlDocumentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml new file +6
-0@@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/nvmem-cells.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# +
Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml line 16
Quoted 10 lines
Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml new file +10
-0+title: Nvmem cells + +description: | + This binding can be used to treat the specific partition as a nvmem provider. + Each direct subnodes represents the nvmem cells and won't be parsed as fixed-partitions. + Fixed-partitions bindings described in fixed-partitions.yaml apply to the nvmem provider node. + +maintainers: + - Ansuel Smith <[email protected]> +
I think this should reference nvmem.yaml. We can drop the $nodename restrictions in it.
Quoted 92 lines
Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml new file +89
-0+properties: + compatible: + const: nvmem-cells + + "#address-cells": true + + "#size-cells": true + + reg: + description: partition offset and size within the flash + maxItems: 1 + +required: + - compatible + - "#address-cells" + - "#size-cells" + - reg + +additionalProperties: true + +examples: + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* ... */ + + }; + art: art@1200000 { + compatible = "nvmem-cells"; + reg = <0x1200000 0x0140000>; + label = "art"; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_gmac1: macaddr_gmac1@0 { + reg = <0x0 0x6>; + }; + + macaddr_gmac2: macaddr_gmac2@6 { + reg = <0x6 0x6>; + }; + + pre_cal_24g: pre_cal_24g@1000 { + reg = <0x1000 0x2f20>; + }; + + pre_cal_5g: pre_cal_5g@5000{ + reg = <0x5000 0x2f20>; + }; + }; + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x000000 0x100000>; + read-only; + }; + + firmware@100000 { + compatible = "brcm,trx"; + label = "firmware"; + reg = <0x100000 0xe00000>; + }; + + calibration@f00000 { + compatible = "nvmem-cells"; + label = "calibration"; + reg = <0xf00000 0x100000>; + ranges = <0 0xf00000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + + wifi0@0 { + reg = <0x000000 0x080000>; + }; + + wifi1@80000 { + reg = <0x080000 0x080000>; + }; + }; + };Signature · 1 line
2.30.0