xfs: Tests to verify inode fork extent count overflow detection
v5 cover xfs: Tests to verify inode fork extent count overflow detection
The patchset at
https://lore.kernel.org/linux-xfs/[email protected]/T/
added support for XFS to detect inode extent count overflow when performing various filesystem operations. The patchset also added new error injection tags for,
1. Reducing maximum extent count to 10.
2. Allocating only single block sized extents.
The corresponding code for xfsprogs can be obtained from
https://lore.kernel.org/linux-xfs/[email protected]/.
The patches posted along with this cover letter add tests to verify the correctness of in-kernel inode extent count overflow detection mechanism.
These patches can also be obtained from
https://github.com/chandanr/xfstests.git at branch extent-overflow-tests.
Changelog:
V4 -> V5:
1. Introduce and use new helper to extract an inode's fsxattr fields.
2. Issue syncfs() call before executing xfs_scrub.
3. Invoke syncfs before executing xfs_scrub.
4. Use _scratch_xfs_get_metadata_field() helper to obtain on-disk data structure values.
5. Declare local variables in _scratch_get_iext_count().
6. Use _reflink and _reflink_range helpers instead of using xfs_io directly.
7. Set realtime extent size to 4k with FS block size is less than 4k.
8. Mark test as "not run" when synthetically constructed realtime fs fails to mount.
9. Update copyright year.
V3 -> V4:
1. Rebase on fstests' latest master branch.
V2 -> V3:
1. Kernel's max pseudo extent count is once again set to 10. Hence change the tests back to using 10 as the maximum extent count.
2. The following tests associated with directories have been removed since directory remove and rename operations are not expected to fail (with -EFBIG error code) in low inode extent count scenarios:
- Populate source directory and mv one entry to destination directory.
- Populate a directory and remove one entry.
V1 -> V2:
1. Obtain extent count for inodes accessible through filesystem path names via "xfs_io -c 'stat' ..." command line. This gets rid of unmount/mount cycles from most of the tests.
2. Use _fill_fs() to consume free space of a filesystem.
3. Use _scratch_inject_error() helper to enable/disable error tags.
4. Use sizeof(struct xfs_dqblk) to calculate number of quotas inside one filesystem block.
5. Write once to every block of the quota inode instead of sequentially filling up each block.
6. Use _get_file_block_size() for tests involving regular files.
7. Modify tests to suit the new pseudo max extent count of 35.
8. Replace xfs_io with $XFS_IO_PROG.
9. Remove code that extended a realtime file since this takes the same path as direct I/O to a regular file.
10. For xattr, do not execute test script when block size is < 4k.
11. Add code to test if removing an xattr from a full attribute fork succeeds.
12. Add code to test if removing a file whose attribute fork is full succeeds.
13. Add code to test if removing a entry from a full directory succeeds.
14. Add code to test if removing a full directory succeeds.
15. Writing to unwritten extents: Integrate buffered and direct I/O tests into a for loop.
16. Writing to a shared extent test: Add test to check funshare operation.
17. Use _scale_fsstress_args() to scale values for "-p" and "-n" arguments for fsstress.
Chandan Babu R (13):
_check_xfs_filesystem: sync fs before running scrub common/xfs: Add a helper to get an inode fork's extent count common/xfs: Add helper to obtain fsxattr field value
xfs: Check for extent overflow when trivally adding a new extent
xfs: Check for extent overflow when growing realtime bitmap/summary
inodes
xfs: Check for extent overflow when punching a hole
xfs: Check for extent overflow when adding/removing xattrs
xfs: Check for extent overflow when adding/removing dir entries
xfs: Check for extent overflow when writing to unwritten extent
xfs: Check for extent overflow when moving extent from cow to data
fork
xfs: Check for extent overflow when remapping an extent
xfs: Check for extent overflow when swapping extents
xfs: Stress test with bmap_alloc_minlen_extent error tag enabled
common/xfs | 36 +++++++++ tests/xfs/528 | 171 +++++++++++++++++++++++++++++++++++++++++++ tests/xfs/528.out | 20 +++++ tests/xfs/529 | 124 +++++++++++++++++++++++++++++++ tests/xfs/529.out | 11 +++ tests/xfs/530 | 83 +++++++++++++++++++++ tests/xfs/530.out | 19 +++++ tests/xfs/531 | 139 +++++++++++++++++++++++++++++++++++ tests/xfs/531.out | 18 +++++ tests/xfs/532 | 182 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/532.out | 17 +++++ tests/xfs/533 | 84 +++++++++++++++++++++ tests/xfs/533.out | 11 +++ tests/xfs/534 | 104 ++++++++++++++++++++++++++ tests/xfs/534.out | 12 +++ tests/xfs/535 | 81 +++++++++++++++++++++ tests/xfs/535.out | 8 ++ tests/xfs/536 | 105 ++++++++++++++++++++++++++ tests/xfs/536.out | 13 ++++ tests/xfs/537 | 84 +++++++++++++++++++++ tests/xfs/537.out | 7 ++ tests/xfs/group | 10 +++ 22 files changed, 1339 insertions(+) create mode 100755 tests/xfs/528 create mode 100644 tests/xfs/528.out create mode 100755 tests/xfs/529 create mode 100644 tests/xfs/529.out create mode 100755 tests/xfs/530 create mode 100644 tests/xfs/530.out create mode 100755 tests/xfs/531 create mode 100644 tests/xfs/531.out create mode 100755 tests/xfs/532 create mode 100644 tests/xfs/532.out create mode 100755 tests/xfs/533 create mode 100644 tests/xfs/533.out create mode 100755 tests/xfs/534 create mode 100644 tests/xfs/534.out create mode 100755 tests/xfs/535 create mode 100644 tests/xfs/535.out create mode 100755 tests/xfs/536 create mode 100644 tests/xfs/536.out create mode 100755 tests/xfs/537 create mode 100644 tests/xfs/537.out
Signature · 1 line
2.29.2
PATCH v5 1/13 _check_xfs_filesystem: sync fs before running scrub
Tests can create a scenario in which a call to syncfs() issued at the end of the execution of the test script would return an error code. xfs_scrub internally calls syncfs() before starting the actual online consistency check operation. Since this call to syncfs() fails, xfs_scrub ends up returning without performing consistency checks on the test filesystem. This can mask a possible on-disk data structure corruption.
To fix the above stated problem, this commit invokes syncfs() prior to executing xfs_scrub.
--- common/xfs | 1 + 1 file changed, 1 insertion(+)
common/xfs +1 -0
@@ -467,6 +467,7 @@ _check_xfs_filesystem() # Run online scrub if we can. mntpt="$(_is_dev_mounted $device)" if [ -n "$mntpt" ] && _supports_xfs_scrub "$mntpt" "$device"; then + $XFS_IO_PROG -c syncfs $mntpt >> $seqres.full 2>&1 "$XFS_SCRUB_PROG" $scrubflag -v -d -n $mntpt > $tmp.scrub 2>&1 if [ $? -ne 0 ]; then _log_err "_check_xfs_filesystem: filesystem on $device failed scrub"
Signature · 1 line
2.29.2
PATCH v5 2/13 common/xfs: Add a helper to get an inode fork's extent count
In reply to Chandan Babu RThis commit adds the helper _scratch_get_iext_count() which returns an inode fork's extent count.
--- common/xfs | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
common/xfs +23 -0
@@ -914,6 +914,29 @@ _scratch_get_bmx_prefix() { return 1 } +_scratch_get_iext_count() +{ + local ino=$1 + local whichfork=$2 + local nextents=0 + local field="" + + case $whichfork in + "attr") + field=core.naextents + ;; + "data") + field=core.nextents + ;; + *) + return 1 + esac + + nextents=$(_scratch_xfs_get_metadata_field $field "inode $ino") + + echo $nextents +} + # # Ensures that we don't pass any mount options incompatible with XFS v4 #
Signature · 1 line
2.29.2
PATCH v5 3/13 common/xfs: Add helper to obtain fsxattr field value
In reply to Chandan Babu RThis commit adds a helper function to obtain the value of a particular field of an inode's fsxattr fields.
--- common/xfs | 12 ++++++++++++ 1 file changed, 12 insertions(+)
common/xfs +12 -0
@@ -194,6 +194,18 @@ _xfs_get_file_block_size() $XFS_INFO_PROG "$path" | grep realtime | sed -e 's/^.*extsz=\([0-9]*\).*$/\1/g' } +xfs_get_fsxattr() +{ + local field="$1" + local path="$2" + local value="" + + value=$($XFS_IO_PROG -c "stat" "$path" | grep "$field") + value=${value##fsxattr.${field} = } + + echo "$value" +} + # xfs_check script is planned to be deprecated. But, we want to # be able to invoke "xfs_check" behavior in xfstests in order to # maintain the current verification levels.
Signature · 1 line
2.29.2
PATCH v5 4/13 xfs: Check for extent overflow when trivally adding a new extent
In reply to Chandan Babu RThis test verifies that XFS does not cause inode fork's extent count to overflow when adding a single extent while there's no possibility of splitting an existing mapping.
--- tests/xfs/528 | 171 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/528.out | 20 ++++++ tests/xfs/group | 1 + 3 files changed, 192 insertions(+) create mode 100755 tests/xfs/528 create mode 100644 tests/xfs/528.out
tests/xfs/528 new file +171 -0
@@ -0,0 +1,171 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 528 +# +# Verify that XFS does not cause inode fork's extent count to overflow when +# adding a single extent while there's no possibility of splitting an existing +# mapping. + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/quota +. ./common/inject +. ./common/populate + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +_require_scratch +_require_xfs_quota +_require_xfs_debug +_require_test_program "punch-alternating" +_require_xfs_io_command "falloc" +_require_xfs_io_error_injection "reduce_max_iextents" +_require_xfs_io_error_injection "bmap_alloc_minlen_extent" + +echo "Format and mount fs" +_scratch_mkfs_sized $((512 * 1024 * 1024)) >> $seqres.full +_scratch_mount -o uquota >> $seqres.full + +bsize=$(_get_file_block_size $SCRATCH_MNT) + +echo "* Delalloc to written extent conversion" + +testfile=$SCRATCH_MNT/testfile + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +nr_blks=$((15 * 2)) + +echo "Create fragmented file" +for i in $(seq 0 2 $((nr_blks - 1))); do + $XFS_IO_PROG -f -s -c "pwrite $((i * bsize)) $bsize" $testfile \ + >> $seqres.full 2>&1 + [[ $? != 0 ]] && break +done + +echo "Verify \$testfile's extent count" + +nextents=$(xfs_get_fsxattr nextents $testfile) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm $testfile + +echo "* Fallocate unwritten extents" + +echo "Fallocate fragmented file" +for i in $(seq 0 2 $((nr_blks - 1))); do + $XFS_IO_PROG -f -c "falloc $((i * bsize)) $bsize" $testfile \ + >> $seqres.full 2>&1 + [[ $? != 0 ]] && break +done + +echo "Verify \$testfile's extent count" + +nextents=$(xfs_get_fsxattr nextents $testfile) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm $testfile + +echo "* Directio write" + +echo "Create fragmented file via directio writes" +for i in $(seq 0 2 $((nr_blks - 1))); do + $XFS_IO_PROG -d -s -f -c "pwrite $((i * bsize)) $bsize" $testfile \ + >> $seqres.full 2>&1 + [[ $? != 0 ]] && break +done + +echo "Verify \$testfile's extent count" + +nextents=$(xfs_get_fsxattr nextents $testfile) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm $testfile + +# Check if XFS gracefully returns with an error code when we try to increase +# extent count of user quota inode beyond the pseudo max extent count limit. +echo "* Extend quota inodes" + +echo "Disable reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 0 + +echo "Consume free space" +fillerdir=$SCRATCH_MNT/fillerdir +nr_free_blks=$(stat -f -c '%f' $SCRATCH_MNT) +nr_free_blks=$((nr_free_blks * 90 / 100)) + +_fill_fs $((bsize * nr_free_blks)) $fillerdir $bsize 0 >> $seqres.full 2>&1 + +echo "Create fragmented filesystem" +for dentry in $(ls -1 $fillerdir/); do + $here/src/punch-alternating $fillerdir/$dentry >> $seqres.full +done + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +echo "Inject bmap_alloc_minlen_extent error tag" +_scratch_inject_error bmap_alloc_minlen_extent 1 + +nr_blks=20 + +# This is a rough calculation; It doesn't take block headers into +# consideration. +# gdb -batch vmlinux -ex 'print sizeof(struct xfs_dqblk)' +# $1 = 136 +nr_quotas_per_block=$((bsize / 136)) +nr_quotas=$((nr_quotas_per_block * nr_blks)) + +echo "Extend uquota file" +for i in $(seq 0 $nr_quotas_per_block $nr_quotas); do + chown $i $testfile >> $seqres.full 2>&1 + [[ $? != 0 ]] && break +done + +_scratch_unmount >> $seqres.full + +echo "Verify uquota inode's extent count" +uquotino=$(_scratch_xfs_get_metadata_field 'uquotino' 'sb 0') + +nextents=$(_scratch_get_iext_count $uquotino data || \ + _fail "Unable to obtain inode fork's extent count") +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +# success, all done +status=0 +exit
tests/xfs/528.out new file +20 -0
@@ -0,0 +1,20 @@ +QA output created by 528 +Format and mount fs +* Delalloc to written extent conversion +Inject reduce_max_iextents error tag +Create fragmented file +Verify $testfile's extent count +* Fallocate unwritten extents +Fallocate fragmented file +Verify $testfile's extent count +* Directio write +Create fragmented file via directio writes +Verify $testfile's extent count +* Extend quota inodes +Disable reduce_max_iextents error tag +Consume free space +Create fragmented filesystem +Inject reduce_max_iextents error tag +Inject bmap_alloc_minlen_extent error tag +Extend uquota file +Verify uquota inode's extent count
tests/xfs/group +1 -0
@@ -525,3 +525,4 @@ 525 auto quick mkfs 526 auto quick mkfs 527 auto quick quota +528 auto quick quota
Signature · 1 line
2.29.2
PATCH v5 7/13 xfs: Check for extent overflow when adding/removing xattrs
In reply to Chandan Babu RThis test verifies that XFS does not cause inode fork's extent count to overflow when adding/removing xattrs.
--- tests/xfs/531 | 139 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/531.out | 18 ++++++ tests/xfs/group | 1 + 3 files changed, 158 insertions(+) create mode 100755 tests/xfs/531 create mode 100644 tests/xfs/531.out
tests/xfs/531 new file +139 -0
@@ -0,0 +1,139 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 531 +# +# Verify that XFS does not cause inode fork's extent count to overflow when +# adding/removing xattrs. +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/attr +. ./common/inject +. ./common/populate + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +_require_scratch +_require_attrs +_require_xfs_debug +_require_test_program "punch-alternating" +_require_xfs_io_error_injection "reduce_max_iextents" +_require_xfs_io_error_injection "bmap_alloc_minlen_extent" + +echo "Format and mount fs" +_scratch_mkfs_sized $((1024 * 1024 * 1024)) >> $seqres.full +_scratch_mount >> $seqres.full + +bsize=$(_get_block_size $SCRATCH_MNT) + +attr_len=255 + +testfile=$SCRATCH_MNT/testfile + +echo "Consume free space" +fillerdir=$SCRATCH_MNT/fillerdir +nr_free_blks=$(stat -f -c '%f' $SCRATCH_MNT) +nr_free_blks=$((nr_free_blks * 90 / 100)) + +_fill_fs $((bsize * nr_free_blks)) $fillerdir $bsize 0 >> $seqres.full 2>&1 + +echo "Create fragmented filesystem" +for dentry in $(ls -1 $fillerdir/); do + $here/src/punch-alternating $fillerdir/$dentry >> $seqres.full +done + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +echo "Inject bmap_alloc_minlen_extent error tag" +_scratch_inject_error bmap_alloc_minlen_extent 1 + +echo "* Set xattrs" + +echo "Create \$testfile" +touch $testfile + +echo "Create xattrs" +nr_attrs=$((bsize * 20 / attr_len)) +for i in $(seq 1 $nr_attrs); do + attr="$(printf "trusted.%0247d" $i)" + $SETFATTR_PROG -n "$attr" $testfile >> $seqres.full 2>&1 + [[ $? != 0 ]] && break +done + +echo "Verify \$testfile's naextent count" + +naextents=$(xfs_get_fsxattr naextents $testfile) +if (( $naextents > 10 )); then + echo "Extent count overflow check failed: naextents = $naextents" + exit 1 +fi + +echo "Remove \$testfile" +rm $testfile + +echo "* Remove xattrs" + +echo "Create \$testfile" +touch $testfile + +echo "Disable reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 0 + +echo "Create initial xattr extents" + +naextents=0 +last="" +start=1 +nr_attrs=$((bsize / attr_len)) + +while (( $naextents < 4 )); do + end=$((start + nr_attrs - 1)) + + for i in $(seq $start $end); do + attr="$(printf "trusted.%0247d" $i)" + $SETFATTR_PROG -n $attr $testfile + done + + start=$((end + 1)) + + naextents=$(xfs_get_fsxattr naextents $testfile) +done + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +echo "Remove xattr to trigger -EFBIG" +attr="$(printf "trusted.%0247d" 1)" +$SETFATTR_PROG -x "$attr" $testfile >> $seqres.full 2>&1 +if [[ $? == 0 ]]; then + echo "Xattr removal succeeded; Should have failed " + exit 1 +fi + +rm $testfile && echo "Successfully removed \$testfile" + +# success, all done +status=0 +exit
tests/xfs/531.out new file +18 -0
@@ -0,0 +1,18 @@ +QA output created by 531 +Format and mount fs +Consume free space +Create fragmented filesystem +Inject reduce_max_iextents error tag +Inject bmap_alloc_minlen_extent error tag +* Set xattrs +Create $testfile +Create xattrs +Verify $testfile's naextent count +Remove $testfile +* Remove xattrs +Create $testfile +Disable reduce_max_iextents error tag +Create initial xattr extents +Inject reduce_max_iextents error tag +Remove xattr to trigger -EFBIG +Successfully removed $testfile
tests/xfs/group +1 -0
@@ -528,3 +528,4 @@ 528 auto quick quota 529 auto quick realtime growfs 530 auto quick punch zero insert collapse +531 auto quick attr
Signature · 1 line
2.29.2
PATCH v5 5/13 xfs: Check for extent overflow when growing realtime bitmap/summary inodes
In reply to Chandan Babu RVerify that XFS does not cause realtime bitmap/summary inode fork's extent count to overflow when growing the realtime volume associated with a filesystem.
--- tests/xfs/529 | 124 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/529.out | 11 ++++ tests/xfs/group | 1 + 3 files changed, 136 insertions(+) create mode 100755 tests/xfs/529 create mode 100644 tests/xfs/529.out
tests/xfs/529 new file +124 -0
@@ -0,0 +1,124 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 529 +# +# Verify that XFS does not cause bitmap/summary inode fork's extent count to +# overflow when growing an the realtime volume of the filesystem. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + _scratch_unmount >> $seqres.full 2>&1 + test -e "$rtdev" && losetup -d $rtdev >> $seqres.full 2>&1 + rm -f $tmp.* $TEST_DIR/$seq.rtvol +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/inject +. ./common/populate + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +# Note that we don't _require_realtime because we synthesize a rt volume +# below. +_require_test +_require_xfs_debug +_require_test_program "punch-alternating" +_require_xfs_io_error_injection "reduce_max_iextents" +_require_xfs_io_error_injection "bmap_alloc_minlen_extent" +_require_scratch_nocheck + +echo "* Test extending rt inodes" + +_scratch_mkfs | _filter_mkfs >> $seqres.full 2> $tmp.mkfs +. $tmp.mkfs + +echo "Create fake rt volume" +nr_bitmap_blks=25 +nr_bits=$((nr_bitmap_blks * dbsize * 8)) + +# Realtime extent size has to be atleast 4k in size. +if (( $dbsize < 4096 )); then + rtextsz=4096 +else + rtextsz=$dbsize +fi + +rtdevsz=$((nr_bits * rtextsz)) +truncate -s $rtdevsz $TEST_DIR/$seq.rtvol +rtdev=$(_create_loop_device $TEST_DIR/$seq.rtvol) + +echo "Format and mount rt volume" + +export USE_EXTERNAL=yes +export SCRATCH_RTDEV=$rtdev +_scratch_mkfs -d size=$((1024 * 1024 * 1024)) -b size=${dbsize} \ + -r size=${rtextsz},extsize=${rtextsz} >> $seqres.full +_try_scratch_mount || _notrun "Couldn't mount fs with synthetic rt volume" + +echo "Consume free space" +fillerdir=$SCRATCH_MNT/fillerdir +nr_free_blks=$(stat -f -c '%f' $SCRATCH_MNT) +nr_free_blks=$((nr_free_blks * 90 / 100)) + +_fill_fs $((dbsize * nr_free_blks)) $fillerdir $dbsize 0 >> $seqres.full 2>&1 + +echo "Create fragmented filesystem" +for dentry in $(ls -1 $fillerdir/); do + $here/src/punch-alternating $fillerdir/$dentry >> $seqres.full +done + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +echo "Inject bmap_alloc_minlen_extent error tag" +_scratch_inject_error bmap_alloc_minlen_extent 1 + +echo "Grow realtime volume" +$XFS_GROWFS_PROG -r $SCRATCH_MNT >> $seqres.full 2>&1 +if [[ $? == 0 ]]; then + echo "Growfs succeeded; should have failed." + exit 1 +fi + +_scratch_unmount >> $seqres.full + +echo "Verify rbmino's and rsumino's extent count" +for rtino in rbmino rsumino; do + ino=$(_scratch_xfs_get_metadata_field $rtino "sb 0") + echo "$rtino = $ino" >> $seqres.full + + nextents=$(_scratch_get_iext_count $ino data || \ + _fail "Unable to obtain inode fork's extent count") + if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 + fi +done + +echo "Check filesystem" +_check_xfs_filesystem $SCRATCH_DEV none $rtdev + +losetup -d $rtdev +rm -f $TEST_DIR/$seq.rtvol + +# success, all done +status=0 +exit
tests/xfs/529.out new file +11 -0
@@ -0,0 +1,11 @@ +QA output created by 529 +* Test extending rt inodes +Create fake rt volume +Format and mount rt volume +Consume free space +Create fragmented filesystem +Inject reduce_max_iextents error tag +Inject bmap_alloc_minlen_extent error tag +Grow realtime volume +Verify rbmino's and rsumino's extent count +Check filesystem
tests/xfs/group +1 -0
@@ -526,3 +526,4 @@ 526 auto quick mkfs 527 auto quick quota 528 auto quick quota +529 auto quick realtime growfs
Signature · 1 line
2.29.2
PATCH v5 6/13 xfs: Check for extent overflow when punching a hole
In reply to Chandan Babu RThis test verifies that XFS does not cause inode fork's extent count to overflow when punching out an extent.
--- tests/xfs/530 | 83 +++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/530.out | 19 +++++++++++ tests/xfs/group | 1 + 3 files changed, 103 insertions(+) create mode 100755 tests/xfs/530 create mode 100644 tests/xfs/530.out
tests/xfs/530 new file +83 -0
@@ -0,0 +1,83 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 530 +# +# Verify that XFS does not cause inode fork's extent count to overflow when +# punching out an extent. +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/inject + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +_require_scratch +_require_xfs_debug +_require_xfs_io_command "fpunch" +_require_xfs_io_command "finsert" +_require_xfs_io_command "fcollapse" +_require_xfs_io_command "fzero" +_require_xfs_io_error_injection "reduce_max_iextents" + +echo "Format and mount fs" +_scratch_mkfs >> $seqres.full +_scratch_mount >> $seqres.full + +bsize=$(_get_file_block_size $SCRATCH_MNT) +nr_blks=30 + +testfile=$SCRATCH_MNT/testfile + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +for op in fpunch finsert fcollapse fzero; do + echo "* $op regular file" + + echo "Create \$testfile" + $XFS_IO_PROG -f -s \ + -c "pwrite -b $((nr_blks * bsize)) 0 $((nr_blks * bsize))" \ + $testfile >> $seqres.full + + echo "$op alternating blocks" + for i in $(seq 1 2 $((nr_blks - 1))); do + $XFS_IO_PROG -f -c "$op $((i * bsize)) $bsize" $testfile \ + >> $seqres.full 2>&1 + [[ $? != 0 ]] && break + done + + echo "Verify \$testfile's extent count" + + nextents=$(xfs_get_fsxattr nextents $testfile) + if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 + fi + + rm $testfile +done + +# success, all done +status=0 +exit
tests/xfs/530.out new file +19 -0
@@ -0,0 +1,19 @@ +QA output created by 530 +Format and mount fs +Inject reduce_max_iextents error tag +* fpunch regular file +Create $testfile +fpunch alternating blocks +Verify $testfile's extent count +* finsert regular file +Create $testfile +finsert alternating blocks +Verify $testfile's extent count +* fcollapse regular file +Create $testfile +fcollapse alternating blocks +Verify $testfile's extent count +* fzero regular file +Create $testfile +fzero alternating blocks +Verify $testfile's extent count
tests/xfs/group +1 -0
@@ -527,3 +527,4 @@ 527 auto quick quota 528 auto quick quota 529 auto quick realtime growfs +530 auto quick punch zero insert collapse
Signature · 1 line
2.29.2
PATCH v5 8/13 xfs: Check for extent overflow when adding/removing dir entries
In reply to Chandan Babu RThis test verifies that XFS does not cause inode fork's extent count to overflow when adding/removing directory entries.
--- tests/xfs/532 | 182 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/532.out | 17 +++++ tests/xfs/group | 1 + 3 files changed, 200 insertions(+) create mode 100755 tests/xfs/532 create mode 100644 tests/xfs/532.out
tests/xfs/532 new file +182 -0
@@ -0,0 +1,182 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 532 +# +# Verify that XFS does not cause inode fork's extent count to overflow when +# adding/removing directory entries. +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/inject +. ./common/populate + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +_require_scratch +_require_xfs_debug +_require_test_program "punch-alternating" +_require_xfs_io_error_injection "reduce_max_iextents" +_require_xfs_io_error_injection "bmap_alloc_minlen_extent" + +_scratch_mkfs_sized $((1024 * 1024 * 1024)) | _filter_mkfs >> $seqres.full 2> $tmp.mkfs +. $tmp.mkfs + +# Filesystems with directory block size greater than one FSB will not be tested, +# since "7 (i.e. XFS_DA_NODE_MAXDEPTH + 1 data block + 1 free block) * 2 (fsb +# count) = 14" is greater than the pseudo max extent count limit of 10. +# Extending the pseudo max limit won't help either. Consider the case where 1 +# FSB is 1k in size and 1 dir block is 64k in size (i.e. fsb count = 64). In +# this case, the pseudo max limit has to be greater than 7 * 64 = 448 extents. +if (( $dirbsize > $dbsize )); then + _notrun "Directory block size ($dirbsize) is larger than FSB size ($dbsize)" +fi + +echo "Format and mount fs" +_scratch_mkfs_sized $((1024 * 1024 * 1024)) >> $seqres.full +_scratch_mount >> $seqres.full + +echo "Consume free space" +fillerdir=$SCRATCH_MNT/fillerdir +nr_free_blks=$(stat -f -c '%f' $SCRATCH_MNT) +nr_free_blks=$((nr_free_blks * 90 / 100)) + +_fill_fs $((dbsize * nr_free_blks)) $fillerdir $dbsize 0 >> $seqres.full 2>&1 + +echo "Create fragmented filesystem" +for dentry in $(ls -1 $fillerdir/); do + $here/src/punch-alternating $fillerdir/$dentry >> $seqres.full +done + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +echo "Inject bmap_alloc_minlen_extent error tag" +_scratch_inject_error bmap_alloc_minlen_extent 1 + +dent_len=255 + +echo "* Create directory entries" + +testdir=$SCRATCH_MNT/testdir +mkdir $testdir + +nr_dents=$((dbsize * 20 / dent_len)) +for i in $(seq 1 $nr_dents); do + dentry="$(printf "%0255d" $i)" + touch ${testdir}/$dentry >> $seqres.full 2>&1 || break +done + +echo "Verify directory's extent count" +nextents=$(xfs_get_fsxattr nextents $testdir) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm -rf $testdir + +echo "* Rename: Populate destination directory" + +dstdir=$SCRATCH_MNT/dstdir +mkdir $dstdir + +nr_dents=$((dirbsize * 20 / dent_len)) + +echo "Populate \$dstdir by moving new directory entries" +for i in $(seq 1 $nr_dents); do + dentry="$(printf "%0255d" $i)" + dentry=${SCRATCH_MNT}/${dentry} + touch $dentry || break + mv $dentry $dstdir >> $seqres.full 2>&1 || break +done + +rm $dentry + +echo "Verify \$dstdir's extent count" + +nextents=$(xfs_get_fsxattr nextents $dstdir) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm -rf $dstdir + +echo "* Create multiple hard links to a single file" + +testdir=$SCRATCH_MNT/testdir +mkdir $testdir + +testfile=$SCRATCH_MNT/testfile +touch $testfile + +nr_dents=$((dirbsize * 20 / dent_len)) + +echo "Create multiple hardlinks" +for i in $(seq 1 $nr_dents); do + dentry="$(printf "%0255d" $i)" + ln $testfile ${testdir}/${dentry} >> $seqres.full 2>&1 || break +done + +rm $testfile + +echo "Verify directory's extent count" +nextents=$(xfs_get_fsxattr nextents $testdir) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm -rf $testdir + +echo "* Create multiple symbolic links to a single file" + +testdir=$SCRATCH_MNT/testdir +mkdir $testdir + +testfile=$SCRATCH_MNT/testfile +touch $testfile + +nr_dents=$((dirbsize * 20 / dent_len)) + +echo "Create multiple symbolic links" +for i in $(seq 1 $nr_dents); do + dentry="$(printf "%0255d" $i)" + ln -s $testfile ${testdir}/${dentry} >> $seqres.full 2>&1 || break; +done + +rm $testfile + +echo "Verify directory's extent count" +nextents=$(xfs_get_fsxattr nextents $testdir) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm -rf $testdir + +# success, all done +status=0 +exit
tests/xfs/532.out new file +17 -0
@@ -0,0 +1,17 @@ +QA output created by 532 +Format and mount fs +Consume free space +Create fragmented filesystem +Inject reduce_max_iextents error tag +Inject bmap_alloc_minlen_extent error tag +* Create directory entries +Verify directory's extent count +* Rename: Populate destination directory +Populate $dstdir by moving new directory entries +Verify $dstdir's extent count +* Create multiple hard links to a single file +Create multiple hardlinks +Verify directory's extent count +* Create multiple symbolic links to a single file +Create multiple symbolic links +Verify directory's extent count
tests/xfs/group +1 -0
@@ -529,3 +529,4 @@ 529 auto quick realtime growfs 530 auto quick punch zero insert collapse 531 auto quick attr +532 auto quick dir hardlink symlink
Signature · 1 line
2.29.2
PATCH v5 9/13 xfs: Check for extent overflow when writing to unwritten extent
In reply to Chandan Babu RThis test verifies that XFS does not cause inode fork's extent count to overflow when writing to an unwritten extent.
--- tests/xfs/533 | 84 +++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/533.out | 11 +++++++ tests/xfs/group | 1 + 3 files changed, 96 insertions(+) create mode 100755 tests/xfs/533 create mode 100644 tests/xfs/533.out
tests/xfs/533 new file +84 -0
@@ -0,0 +1,84 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 533 +# +# Verify that XFS does not cause inode fork's extent count to overflow when +# writing to an unwritten extent. +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/inject + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +_require_scratch +_require_xfs_debug +_require_xfs_io_command "falloc" +_require_xfs_io_error_injection "reduce_max_iextents" + +echo "Format and mount fs" +_scratch_mkfs_sized $((1024 * 1024 * 1024)) >> $seqres.full +_scratch_mount >> $seqres.full + +bsize=$(_get_file_block_size $SCRATCH_MNT) + +testfile=${SCRATCH_MNT}/testfile + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +nr_blks=15 + +for io in Buffered Direct; do + echo "* $io write to unwritten extent" + + echo "Fallocate $nr_blks blocks" + $XFS_IO_PROG -f -c "falloc 0 $((nr_blks * bsize))" $testfile >> $seqres.full + + if [[ $io == "Buffered" ]]; then + xfs_io_flag="" + else + xfs_io_flag="-d" + fi + + echo "$io write to every other block of fallocated space" + for i in $(seq 1 2 $((nr_blks - 1))); do + $XFS_IO_PROG -f -s $xfs_io_flag -c "pwrite $((i * bsize)) $bsize" \ + $testfile >> $seqres.full 2>&1 + [[ $? != 0 ]] && break + done + + echo "Verify \$testfile's extent count" + nextents=$(xfs_get_fsxattr nextents $testfile) + if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 + fi + + rm $testfile +done + +# success, all done +status=0 +exit
tests/xfs/533.out new file +11 -0
@@ -0,0 +1,11 @@ +QA output created by 533 +Format and mount fs +Inject reduce_max_iextents error tag +* Buffered write to unwritten extent +Fallocate 15 blocks +Buffered write to every other block of fallocated space +Verify $testfile's extent count +* Direct write to unwritten extent +Fallocate 15 blocks +Direct write to every other block of fallocated space +Verify $testfile's extent count
tests/xfs/group +1 -0
@@ -530,3 +530,4 @@ 530 auto quick punch zero insert collapse 531 auto quick attr 532 auto quick dir hardlink symlink +533 auto quick
Signature · 1 line
2.29.2
PATCH v5 10/13 xfs: Check for extent overflow when moving extent from cow to data fork
In reply to Chandan Babu RThis test verifies that XFS does not cause inode fork's extent count to overflow when writing to/funshare-ing a shared extent.
--- tests/xfs/534 | 104 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/534.out | 12 ++++++ tests/xfs/group | 1 + 3 files changed, 117 insertions(+) create mode 100755 tests/xfs/534 create mode 100644 tests/xfs/534.out
tests/xfs/534 new file +104 -0
@@ -0,0 +1,104 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 534 +# +# Verify that XFS does not cause inode fork's extent count to overflow when +# writing to a shared extent. +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/inject + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +_require_scratch +_require_scratch_reflink +_require_xfs_debug +_require_xfs_io_command "reflink" +_require_xfs_io_command "funshare" +_require_xfs_io_error_injection "reduce_max_iextents" + +echo "Format and mount fs" +_scratch_mkfs_sized $((512 * 1024 * 1024)) >> $seqres.full +_scratch_mount >> $seqres.full + +bsize=$(_get_block_size $SCRATCH_MNT) + +nr_blks=15 + +srcfile=${SCRATCH_MNT}/srcfile +dstfile=${SCRATCH_MNT}/dstfile + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +echo "Create a \$srcfile having an extent of length $nr_blks blocks" +$XFS_IO_PROG -f -c "pwrite -b $((nr_blks * bsize)) 0 $((nr_blks * bsize))" \ + -c fsync $srcfile >> $seqres.full + +echo "* Write to shared extent" + +echo "Share the extent with \$dstfile" +_reflink $srcfile $dstfile >> $seqres.full + +echo "Buffered write to every other block of \$dstfile's shared extent" +for i in $(seq 1 2 $((nr_blks - 1))); do + $XFS_IO_PROG -f -s -c "pwrite $((i * bsize)) $bsize" $dstfile \ + >> $seqres.full 2>&1 + [[ $? != 0 ]] && break +done + +echo "Verify \$dstfile's extent count" +nextents=$(xfs_get_fsxattr nextents $dstfile) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm $dstfile + +echo "* Funshare shared extent" + +echo "Share the extent with \$dstfile" +_reflink $srcfile $dstfile >> $seqres.full + +echo "Funshare every other block of \$dstfile's shared extent" +for i in $(seq 1 2 $((nr_blks - 1))); do + $XFS_IO_PROG -f -s -c "funshare $((i * bsize)) $bsize" $dstfile \ + >> $seqres.full 2>&1 + [[ $? != 0 ]] && break +done + +echo "Verify \$dstfile's extent count" +nextents=$(xfs_get_fsxattr nextents $dstfile) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +# success, all done +status=0 +exit +
tests/xfs/534.out new file +12 -0
@@ -0,0 +1,12 @@ +QA output created by 534 +Format and mount fs +Inject reduce_max_iextents error tag +Create a $srcfile having an extent of length 15 blocks +* Write to shared extent +Share the extent with $dstfile +Buffered write to every other block of $dstfile's shared extent +Verify $dstfile's extent count +* Funshare shared extent +Share the extent with $dstfile +Funshare every other block of $dstfile's shared extent +Verify $dstfile's extent count
tests/xfs/group +1 -0
@@ -531,3 +531,4 @@ 531 auto quick attr 532 auto quick dir hardlink symlink 533 auto quick +534 auto quick reflink
Signature · 1 line
2.29.2
PATCH v5 11/13 xfs: Check for extent overflow when remapping an extent
In reply to Chandan Babu RThis test verifies that XFS does not cause inode fork's extent count to overflow when remapping extents from one file's inode fork to another.
--- tests/xfs/535 | 81 +++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/535.out | 8 +++++ tests/xfs/group | 1 + 3 files changed, 90 insertions(+) create mode 100755 tests/xfs/535 create mode 100644 tests/xfs/535.out
tests/xfs/535 new file +81 -0
@@ -0,0 +1,81 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 535 +# +# Verify that XFS does not cause inode fork's extent count to overflow when +# remapping extents from one file's inode fork to another. +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/inject + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +_require_scratch +_require_scratch_reflink +_require_xfs_debug +_require_xfs_io_command "reflink" +_require_xfs_io_error_injection "reduce_max_iextents" + +echo "* Reflink remap extents" + +echo "Format and mount fs" +_scratch_mkfs >> $seqres.full +_scratch_mount >> $seqres.full + +bsize=$(_get_block_size $SCRATCH_MNT) + +srcfile=${SCRATCH_MNT}/srcfile +dstfile=${SCRATCH_MNT}/dstfile + +nr_blks=15 + +echo "Create \$srcfile having an extent of length $nr_blks blocks" +$XFS_IO_PROG -f -c "pwrite -b $((nr_blks * bsize)) 0 $((nr_blks * bsize))" \ + -c fsync $srcfile >> $seqres.full + +echo "Create \$dstfile having an extent of length $nr_blks blocks" +$XFS_IO_PROG -f -c "pwrite -b $((nr_blks * bsize)) 0 $((nr_blks * bsize))" \ + -c fsync $dstfile >> $seqres.full + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +echo "Reflink every other block from \$srcfile into \$dstfile" +for i in $(seq 1 2 $((nr_blks - 1))); do + _reflink_range $srcfile $((i * bsize)) $dstfile $((i * bsize)) $bsize \ + >> $seqres.full 2>&1 +done + +echo "Verify \$dstfile's extent count" +nextents=$(xfs_get_fsxattr nextents $dstfile) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +# success, all done +status=0 +exit
tests/xfs/535.out new file +8 -0
@@ -0,0 +1,8 @@ +QA output created by 535 +* Reflink remap extents +Format and mount fs +Create $srcfile having an extent of length 15 blocks +Create $dstfile having an extent of length 15 blocks +Inject reduce_max_iextents error tag +Reflink every other block from $srcfile into $dstfile +Verify $dstfile's extent count
tests/xfs/group +1 -0
@@ -532,3 +532,4 @@ 532 auto quick dir hardlink symlink 533 auto quick 534 auto quick reflink +535 auto quick reflink
Signature · 1 line
2.29.2
PATCH v5 12/13 xfs: Check for extent overflow when swapping extents
In reply to Chandan Babu RThis test verifies that XFS does not cause inode fork's extent count to overflow when swapping forks across two files.
--- tests/xfs/536 | 105 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/536.out | 13 ++++++ tests/xfs/group | 1 + 3 files changed, 119 insertions(+) create mode 100755 tests/xfs/536 create mode 100644 tests/xfs/536.out
tests/xfs/536 new file +105 -0
@@ -0,0 +1,105 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 536 +# +# Verify that XFS does not cause inode fork's extent count to overflow when +# swapping forks between files +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/inject + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +_require_scratch +_require_xfs_debug +_require_xfs_scratch_rmapbt +_require_xfs_io_command "fcollapse" +_require_xfs_io_command "swapext" +_require_xfs_io_error_injection "reduce_max_iextents" + +echo "* Swap extent forks" + +echo "Format and mount fs" +_scratch_mkfs >> $seqres.full +_scratch_mount >> $seqres.full + +bsize=$(_get_block_size $SCRATCH_MNT) + +srcfile=${SCRATCH_MNT}/srcfile +donorfile=${SCRATCH_MNT}/donorfile + +echo "Create \$donorfile having an extent of length 67 blocks" +$XFS_IO_PROG -f -s -c "pwrite -b $((17 * bsize)) 0 $((17 * bsize))" $donorfile \ + >> $seqres.full + +# After the for loop the donor file will have the following extent layout +# | 0-4 | 5 | 6 | 7 | 8 | 9 | 10 | +echo "Fragment \$donorfile" +for i in $(seq 5 10); do + start_offset=$((i * bsize)) + $XFS_IO_PROG -f -c "fcollapse $start_offset $bsize" $donorfile >> $seqres.full +done + +echo "Create \$srcfile having an extent of length 18 blocks" +$XFS_IO_PROG -f -s -c "pwrite -b $((18 * bsize)) 0 $((18 * bsize))" $srcfile \ + >> $seqres.full + +echo "Fragment \$srcfile" +# After the for loop the src file will have the following extent layout +# | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7-10 | +for i in $(seq 1 7); do + start_offset=$((i * bsize)) + $XFS_IO_PROG -f -c "fcollapse $start_offset $bsize" $srcfile >> $seqres.full +done + +echo "Collect \$donorfile's extent count" +donor_nr_exts=$(xfs_get_fsxattr nextents $donorfile) + +echo "Collect \$srcfile's extent count" +src_nr_exts=$(xfs_get_fsxattr nextents $srcfile) + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +echo "Swap \$srcfile's and \$donorfile's extent forks" +$XFS_IO_PROG -f -c "swapext $donorfile" $srcfile >> $seqres.full 2>&1 + +echo "Check for \$donorfile's extent count overflow" +nextents=$(xfs_get_fsxattr nextents $donorfile) + +if (( $nextents == $src_nr_exts )); then + echo "\$donorfile: Extent count overflow check failed" +fi + +echo "Check for \$srcfile's extent count overflow" +nextents=$(xfs_get_fsxattr nextents $srcfile) + +if (( $nextents == $donor_nr_exts )); then + echo "\$srcfile: Extent count overflow check failed" +fi + +# success, all done +status=0 +exit
tests/xfs/536.out new file +13 -0
@@ -0,0 +1,13 @@ +QA output created by 536 +* Swap extent forks +Format and mount fs +Create $donorfile having an extent of length 67 blocks +Fragment $donorfile +Create $srcfile having an extent of length 18 blocks +Fragment $srcfile +Collect $donorfile's extent count +Collect $srcfile's extent count +Inject reduce_max_iextents error tag +Swap $srcfile's and $donorfile's extent forks +Check for $donorfile's extent count overflow +Check for $srcfile's extent count overflow
tests/xfs/group +1 -0
@@ -533,3 +533,4 @@ 533 auto quick 534 auto quick reflink 535 auto quick reflink +536 auto quick
Signature · 1 line
2.29.2
PATCH v5 13/13 xfs: Stress test with bmap_alloc_minlen_extent error tag enabled
In reply to Chandan Babu RThis commit adds a stress test that executes fsstress with bmap_alloc_minlen_extent error tag enabled.
--- tests/xfs/537 | 84 +++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/537.out | 7 ++++ tests/xfs/group | 1 + 3 files changed, 92 insertions(+) create mode 100755 tests/xfs/537 create mode 100644 tests/xfs/537.out
tests/xfs/537 new file +84 -0
@@ -0,0 +1,84 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 537 +# +# Execute fsstress with bmap_alloc_minlen_extent error tag enabled. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/inject +. ./common/populate + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +_require_scratch +_require_xfs_debug +_require_test_program "punch-alternating" +_require_xfs_io_error_injection "bmap_alloc_minlen_extent" + +echo "Format and mount fs" +_scratch_mkfs_sized $((1024 * 1024 * 1024)) >> $seqres.full +_scratch_mount >> $seqres.full + +bsize=$(_get_file_block_size $SCRATCH_MNT) + +echo "Consume free space" +fillerdir=$SCRATCH_MNT/fillerdir +nr_free_blks=$(stat -f -c '%f' $SCRATCH_MNT) +nr_free_blks=$((nr_free_blks * 90 / 100)) + +_fill_fs $((bsize * nr_free_blks)) $fillerdir $bsize 0 >> $seqres.full 2>&1 + +echo "Create fragmented filesystem" +for dentry in $(ls -1 $fillerdir/); do + $here/src/punch-alternating $fillerdir/$dentry >> $seqres.full +done + +echo "Inject bmap_alloc_minlen_extent error tag" +_scratch_inject_error bmap_alloc_minlen_extent 1 + +echo "Scale fsstress args" +args=$(_scale_fsstress_args -p $((LOAD_FACTOR * 75)) -n $((TIME_FACTOR * 1000))) + +echo "Execute fsstress in background" +$FSSTRESS_PROG -d $SCRATCH_MNT $args \ + -f bulkstat=0 \ + -f bulkstat1=0 \ + -f fiemap=0 \ + -f getattr=0 \ + -f getdents=0 \ + -f getfattr=0 \ + -f listfattr=0 \ + -f mread=0 \ + -f read=0 \ + -f readlink=0 \ + -f readv=0 \ + -f stat=0 \ + -f aread=0 \ + -f dread=0 > /dev/null 2>&1 + +# success, all done +status=0 +exit
tests/xfs/537.out new file +7 -0
@@ -0,0 +1,7 @@ +QA output created by 537 +Format and mount fs +Consume free space +Create fragmented filesystem +Inject bmap_alloc_minlen_extent error tag +Scale fsstress args +Execute fsstress in background
tests/xfs/group +1 -0
@@ -534,3 +534,4 @@ 534 auto quick reflink 535 auto quick reflink 536 auto quick +537 auto stress
Signature · 1 line
2.29.2
Re: [PATCH V5 01/13] _check_xfs_filesystem: sync fs before running scrub
In reply to Chandan Babu RQuoted 6 lines · Chandan Babu R
Tests can create a scenario in which a call to
syncfs()issued at the end of the execution of the test script would return an error code.xfs_scrubinternally callssyncfs()before starting the actual online consistency check operation. Since this call tosyncfs()fails,xfs_scrubends up returning without performing consistency checks on the test filesystem. This can mask a possible on-disk data structure corruption.
This explanation for why we're calling syncfs before invoking scrub ought to be captured in a comment preceeding the syncfs call.
--D
Quoted 24 lines
To fix the above stated problem, this commit invokes
syncfs()prior to executingxfs_scrub.Suggested-by Darrick J. Wong <[email protected]>Signed-off-by Chandan Babu R <[email protected]>--- common/xfs | 1 + 1 file changed, 1 insertion(+)common/xfs +1
-0@@ -467,6 +467,7 @@ _check_xfs_filesystem() # Run online scrub if we can. mntpt="$(_is_dev_mounted $device)" if [ -n "$mntpt" ] && _supports_xfs_scrub "$mntpt" "$device"; then + $XFS_IO_PROG -c syncfs $mntpt >> $seqres.full 2>&1 "$XFS_SCRUB_PROG" $scrubflag -v -d -n $mntpt > $tmp.scrub 2>&1 if [ $? -ne 0 ]; then _log_err "_check_xfs_filesystem: filesystem on $device failed scrub"Signature · 1 line
2.29.2
Re: [PATCH V5 02/13] common/xfs: Add a helper to get an inode fork's extent count
In reply to Chandan Babu RQuoted 27 lines · Chandan Babu R
This commit adds the helper
_scratch_get_iext_count()which returns an inode fork's extent count.Signed-off-by Chandan Babu R <[email protected]>--- common/xfs | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)common/xfs +11
-0@@ -914,6 +914,29 @@ _scratch_get_bmx_prefix() { return 1 } +_scratch_get_iext_count() +{ + local ino=$1 + local whichfork=$2 + local nextents=0 + local field="" + + case $whichfork in + "attr") + field=core.naextents + ;;
common/xfs _scratch_get_bmx_prefix() { · line 937
Quoted 10 lines
common/xfs +10
-0+ "data") + field=core.nextents + ;; + *) + return 1 + esac + + nextents=$(_scratch_xfs_get_metadata_field $field "inode $ino") + + echo $nextents
Any reason why you capture the contents into a variable and then echo the variable a line later? You could omit all that and just end with the get_metadata_field call.
--D
Quoted 8 lines
common/xfs +2
-0+} + # # Ensures that we don't pass any mount options incompatible with XFS v4 #Signature · 1 line
2.29.2
Re: [PATCH V5 03/13] common/xfs: Add helper to obtain fsxattr field value
In reply to Chandan Babu RQuoted 13 lines · Chandan Babu R
This commit adds a helper function to obtain the value of a particular field of an inode's fsxattr fields.
Signed-off-by Chandan Babu R <[email protected]>--- common/xfs | 12 ++++++++++++ 1 file changed, 12 insertions(+)common/xfs +0
-0
common/xfs _xfs_get_file_block_size() · line 197
Quoted 4 lines
common/xfs +1
-0@@ -194,6 +194,18 @@ _xfs_get_file_block_size() $XFS_INFO_PROG "$path" | grep realtime | sed -e 's/^.*extsz=\([0-9]*\).*$/\1/g' } +xfs_get_fsxattr()
Shared helpers always begin with an underscore, e.g. _xfs_get_fsxattr()
common/xfs _xfs_get_file_block_size() · line 206
Quoted 9 lines
common/xfs +9
-0+{ + local field="$1" + local path="$2" + local value="" + + value=$($XFS_IO_PROG -c "stat" "$path" | grep "$field") + value=${value##fsxattr.${field} = } + + echo "$value"
This could be streamlined to:
local value=$($XFS_IO_PROG -c "stat" "$path" | grep "$field")
echo "${value##fsxattr.${field} = }"Right?
--D
Quoted 8 lines
common/xfs +2
-0+} + # xfs_check script is planned to be deprecated. But, we want to # be able to invoke "xfs_check" behavior in xfstests in order to # maintain the current verification levels.Signature · 1 line
2.29.2
Re: [PATCH V5 04/13] xfs: Check for extent overflow when trivally adding a new extent
In reply to Chandan Babu RQuoted 5 lines · Chandan Babu R
This test verifies that XFS does not cause inode fork's extent count to overflow when adding a single extent while there's no possibility of splitting an existing mapping.
Signed-off-by Chandan Babu R <[email protected]>
Looks ok,
--D
Quoted 223 lines
--- tests/xfs/528 | 171 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/528.out | 20 ++++++ tests/xfs/group | 1 + 3 files changed, 192 insertions(+) create mode 100755 tests/xfs/528 create mode 100644 tests/xfs/528.outtests/xfs/528 new file +171
-0@@ -0,0 +1,171 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 528 +# +# Verify that XFS does not cause inode fork's extent count to overflow when +# adding a single extent while there's no possibility of splitting an existing +# mapping. + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/quota +. ./common/inject +. ./common/populate + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +_require_scratch +_require_xfs_quota +_require_xfs_debug +_require_test_program "punch-alternating" +_require_xfs_io_command "falloc" +_require_xfs_io_error_injection "reduce_max_iextents" +_require_xfs_io_error_injection "bmap_alloc_minlen_extent" + +echo "Format and mount fs" +_scratch_mkfs_sized $((512 * 1024 * 1024)) >> $seqres.full +_scratch_mount -o uquota >> $seqres.full + +bsize=$(_get_file_block_size $SCRATCH_MNT) + +echo "* Delalloc to written extent conversion" + +testfile=$SCRATCH_MNT/testfile + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +nr_blks=$((15 * 2)) + +echo "Create fragmented file" +for i in $(seq 0 2 $((nr_blks - 1))); do + $XFS_IO_PROG -f -s -c "pwrite $((i * bsize)) $bsize" $testfile \ + >> $seqres.full 2>&1 + [[ $? != 0 ]] && break +done + +echo "Verify \$testfile's extent count" + +nextents=$(xfs_get_fsxattr nextents $testfile) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm $testfile + +echo "* Fallocate unwritten extents" + +echo "Fallocate fragmented file" +for i in $(seq 0 2 $((nr_blks - 1))); do + $XFS_IO_PROG -f -c "falloc $((i * bsize)) $bsize" $testfile \ + >> $seqres.full 2>&1 + [[ $? != 0 ]] && break +done + +echo "Verify \$testfile's extent count" + +nextents=$(xfs_get_fsxattr nextents $testfile) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm $testfile + +echo "* Directio write" + +echo "Create fragmented file via directio writes" +for i in $(seq 0 2 $((nr_blks - 1))); do + $XFS_IO_PROG -d -s -f -c "pwrite $((i * bsize)) $bsize" $testfile \ + >> $seqres.full 2>&1 + [[ $? != 0 ]] && break +done + +echo "Verify \$testfile's extent count" + +nextents=$(xfs_get_fsxattr nextents $testfile) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm $testfile + +# Check if XFS gracefully returns with an error code when we try to increase +# extent count of user quota inode beyond the pseudo max extent count limit. +echo "* Extend quota inodes" + +echo "Disable reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 0 + +echo "Consume free space" +fillerdir=$SCRATCH_MNT/fillerdir +nr_free_blks=$(stat -f -c '%f' $SCRATCH_MNT) +nr_free_blks=$((nr_free_blks * 90 / 100)) + +_fill_fs $((bsize * nr_free_blks)) $fillerdir $bsize 0 >> $seqres.full 2>&1 + +echo "Create fragmented filesystem" +for dentry in $(ls -1 $fillerdir/); do + $here/src/punch-alternating $fillerdir/$dentry >> $seqres.full +done + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +echo "Inject bmap_alloc_minlen_extent error tag" +_scratch_inject_error bmap_alloc_minlen_extent 1 + +nr_blks=20 + +# This is a rough calculation; It doesn't take block headers into +# consideration. +# gdb -batch vmlinux -ex 'print sizeof(struct xfs_dqblk)' +# $1 = 136 +nr_quotas_per_block=$((bsize / 136)) +nr_quotas=$((nr_quotas_per_block * nr_blks)) + +echo "Extend uquota file" +for i in $(seq 0 $nr_quotas_per_block $nr_quotas); do + chown $i $testfile >> $seqres.full 2>&1 + [[ $? != 0 ]] && break +done + +_scratch_unmount >> $seqres.full + +echo "Verify uquota inode's extent count" +uquotino=$(_scratch_xfs_get_metadata_field 'uquotino' 'sb 0') + +nextents=$(_scratch_get_iext_count $uquotino data || \ + _fail "Unable to obtain inode fork's extent count") +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +# success, all done +status=0 +exittests/xfs/528.out new file +20
-0@@ -0,0 +1,20 @@ +QA output created by 528 +Format and mount fs +* Delalloc to written extent conversion +Inject reduce_max_iextents error tag +Create fragmented file +Verify $testfile's extent count +* Fallocate unwritten extents +Fallocate fragmented file +Verify $testfile's extent count +* Directio write +Create fragmented file via directio writes +Verify $testfile's extent count +* Extend quota inodes +Disable reduce_max_iextents error tag +Consume free space +Create fragmented filesystem +Inject reduce_max_iextents error tag +Inject bmap_alloc_minlen_extent error tag +Extend uquota file +Verify uquota inode's extent counttests/xfs/group +1
-0@@ -525,3 +525,4 @@ 525 auto quick mkfs 526 auto quick mkfs 527 auto quick quota +528 auto quick quotaSignature · 1 line
2.29.2
Re: [PATCH V5 05/13] xfs: Check for extent overflow when growing realtime bitmap/summary inodes
In reply to Chandan Babu RQuoted 5 lines · Chandan Babu R
Verify that XFS does not cause realtime bitmap/summary inode fork's extent count to overflow when growing the realtime volume associated with a filesystem.
Signed-off-by Chandan Babu R <[email protected]>
Looks good to me,
--D
Quoted 167 lines
--- tests/xfs/529 | 124 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/529.out | 11 ++++ tests/xfs/group | 1 + 3 files changed, 136 insertions(+) create mode 100755 tests/xfs/529 create mode 100644 tests/xfs/529.outtests/xfs/529 new file +124
-0@@ -0,0 +1,124 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 529 +# +# Verify that XFS does not cause bitmap/summary inode fork's extent count to +# overflow when growing an the realtime volume of the filesystem. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + _scratch_unmount >> $seqres.full 2>&1 + test -e "$rtdev" && losetup -d $rtdev >> $seqres.full 2>&1 + rm -f $tmp.* $TEST_DIR/$seq.rtvol +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/inject +. ./common/populate + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +# Note that we don't _require_realtime because we synthesize a rt volume +# below. +_require_test +_require_xfs_debug +_require_test_program "punch-alternating" +_require_xfs_io_error_injection "reduce_max_iextents" +_require_xfs_io_error_injection "bmap_alloc_minlen_extent" +_require_scratch_nocheck + +echo "* Test extending rt inodes" + +_scratch_mkfs | _filter_mkfs >> $seqres.full 2> $tmp.mkfs +. $tmp.mkfs + +echo "Create fake rt volume" +nr_bitmap_blks=25 +nr_bits=$((nr_bitmap_blks * dbsize * 8)) + +# Realtime extent size has to be atleast 4k in size. +if (( $dbsize < 4096 )); then + rtextsz=4096 +else + rtextsz=$dbsize +fi + +rtdevsz=$((nr_bits * rtextsz)) +truncate -s $rtdevsz $TEST_DIR/$seq.rtvol +rtdev=$(_create_loop_device $TEST_DIR/$seq.rtvol) + +echo "Format and mount rt volume" + +export USE_EXTERNAL=yes +export SCRATCH_RTDEV=$rtdev +_scratch_mkfs -d size=$((1024 * 1024 * 1024)) -b size=${dbsize} \ + -r size=${rtextsz},extsize=${rtextsz} >> $seqres.full +_try_scratch_mount || _notrun "Couldn't mount fs with synthetic rt volume" + +echo "Consume free space" +fillerdir=$SCRATCH_MNT/fillerdir +nr_free_blks=$(stat -f -c '%f' $SCRATCH_MNT) +nr_free_blks=$((nr_free_blks * 90 / 100)) + +_fill_fs $((dbsize * nr_free_blks)) $fillerdir $dbsize 0 >> $seqres.full 2>&1 + +echo "Create fragmented filesystem" +for dentry in $(ls -1 $fillerdir/); do + $here/src/punch-alternating $fillerdir/$dentry >> $seqres.full +done + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +echo "Inject bmap_alloc_minlen_extent error tag" +_scratch_inject_error bmap_alloc_minlen_extent 1 + +echo "Grow realtime volume" +$XFS_GROWFS_PROG -r $SCRATCH_MNT >> $seqres.full 2>&1 +if [[ $? == 0 ]]; then + echo "Growfs succeeded; should have failed." + exit 1 +fi + +_scratch_unmount >> $seqres.full + +echo "Verify rbmino's and rsumino's extent count" +for rtino in rbmino rsumino; do + ino=$(_scratch_xfs_get_metadata_field $rtino "sb 0") + echo "$rtino = $ino" >> $seqres.full + + nextents=$(_scratch_get_iext_count $ino data || \ + _fail "Unable to obtain inode fork's extent count") + if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 + fi +done + +echo "Check filesystem" +_check_xfs_filesystem $SCRATCH_DEV none $rtdev + +losetup -d $rtdev +rm -f $TEST_DIR/$seq.rtvol + +# success, all done +status=0 +exittests/xfs/529.out new file +11
-0@@ -0,0 +1,11 @@ +QA output created by 529 +* Test extending rt inodes +Create fake rt volume +Format and mount rt volume +Consume free space +Create fragmented filesystem +Inject reduce_max_iextents error tag +Inject bmap_alloc_minlen_extent error tag +Grow realtime volume +Verify rbmino's and rsumino's extent count +Check filesystemtests/xfs/group +1
-0@@ -526,3 +526,4 @@ 526 auto quick mkfs 527 auto quick quota 528 auto quick quota +529 auto quick realtime growfsSignature · 1 line
2.29.2
Re: [PATCH V5 08/13] xfs: Check for extent overflow when adding/removing dir entries
In reply to Chandan Babu RQuoted 4 lines · Chandan Babu R
This test verifies that XFS does not cause inode fork's extent count to overflow when adding/removing directory entries.
Signed-off-by Chandan Babu R <[email protected]>
Looks reasonable,
--D
Quoted 231 lines
--- tests/xfs/532 | 182 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/532.out | 17 +++++ tests/xfs/group | 1 + 3 files changed, 200 insertions(+) create mode 100755 tests/xfs/532 create mode 100644 tests/xfs/532.outtests/xfs/532 new file +182
-0@@ -0,0 +1,182 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 532 +# +# Verify that XFS does not cause inode fork's extent count to overflow when +# adding/removing directory entries. +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/inject +. ./common/populate + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +_require_scratch +_require_xfs_debug +_require_test_program "punch-alternating" +_require_xfs_io_error_injection "reduce_max_iextents" +_require_xfs_io_error_injection "bmap_alloc_minlen_extent" + +_scratch_mkfs_sized $((1024 * 1024 * 1024)) | _filter_mkfs >> $seqres.full 2> $tmp.mkfs +. $tmp.mkfs + +# Filesystems with directory block size greater than one FSB will not be tested, +# since "7 (i.e. XFS_DA_NODE_MAXDEPTH + 1 data block + 1 free block) * 2 (fsb +# count) = 14" is greater than the pseudo max extent count limit of 10. +# Extending the pseudo max limit won't help either. Consider the case where 1 +# FSB is 1k in size and 1 dir block is 64k in size (i.e. fsb count = 64). In +# this case, the pseudo max limit has to be greater than 7 * 64 = 448 extents. +if (( $dirbsize > $dbsize )); then + _notrun "Directory block size ($dirbsize) is larger than FSB size ($dbsize)" +fi + +echo "Format and mount fs" +_scratch_mkfs_sized $((1024 * 1024 * 1024)) >> $seqres.full +_scratch_mount >> $seqres.full + +echo "Consume free space" +fillerdir=$SCRATCH_MNT/fillerdir +nr_free_blks=$(stat -f -c '%f' $SCRATCH_MNT) +nr_free_blks=$((nr_free_blks * 90 / 100)) + +_fill_fs $((dbsize * nr_free_blks)) $fillerdir $dbsize 0 >> $seqres.full 2>&1 + +echo "Create fragmented filesystem" +for dentry in $(ls -1 $fillerdir/); do + $here/src/punch-alternating $fillerdir/$dentry >> $seqres.full +done + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +echo "Inject bmap_alloc_minlen_extent error tag" +_scratch_inject_error bmap_alloc_minlen_extent 1 + +dent_len=255 + +echo "* Create directory entries" + +testdir=$SCRATCH_MNT/testdir +mkdir $testdir + +nr_dents=$((dbsize * 20 / dent_len)) +for i in $(seq 1 $nr_dents); do + dentry="$(printf "%0255d" $i)" + touch ${testdir}/$dentry >> $seqres.full 2>&1 || break +done + +echo "Verify directory's extent count" +nextents=$(xfs_get_fsxattr nextents $testdir) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm -rf $testdir + +echo "* Rename: Populate destination directory" + +dstdir=$SCRATCH_MNT/dstdir +mkdir $dstdir + +nr_dents=$((dirbsize * 20 / dent_len)) + +echo "Populate \$dstdir by moving new directory entries" +for i in $(seq 1 $nr_dents); do + dentry="$(printf "%0255d" $i)" + dentry=${SCRATCH_MNT}/${dentry} + touch $dentry || break + mv $dentry $dstdir >> $seqres.full 2>&1 || break +done + +rm $dentry + +echo "Verify \$dstdir's extent count" + +nextents=$(xfs_get_fsxattr nextents $dstdir) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm -rf $dstdir + +echo "* Create multiple hard links to a single file" + +testdir=$SCRATCH_MNT/testdir +mkdir $testdir + +testfile=$SCRATCH_MNT/testfile +touch $testfile + +nr_dents=$((dirbsize * 20 / dent_len)) + +echo "Create multiple hardlinks" +for i in $(seq 1 $nr_dents); do + dentry="$(printf "%0255d" $i)" + ln $testfile ${testdir}/${dentry} >> $seqres.full 2>&1 || break +done + +rm $testfile + +echo "Verify directory's extent count" +nextents=$(xfs_get_fsxattr nextents $testdir) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm -rf $testdir + +echo "* Create multiple symbolic links to a single file" + +testdir=$SCRATCH_MNT/testdir +mkdir $testdir + +testfile=$SCRATCH_MNT/testfile +touch $testfile + +nr_dents=$((dirbsize * 20 / dent_len)) + +echo "Create multiple symbolic links" +for i in $(seq 1 $nr_dents); do + dentry="$(printf "%0255d" $i)" + ln -s $testfile ${testdir}/${dentry} >> $seqres.full 2>&1 || break; +done + +rm $testfile + +echo "Verify directory's extent count" +nextents=$(xfs_get_fsxattr nextents $testdir) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm -rf $testdir + +# success, all done +status=0 +exittests/xfs/532.out new file +17
-0@@ -0,0 +1,17 @@ +QA output created by 532 +Format and mount fs +Consume free space +Create fragmented filesystem +Inject reduce_max_iextents error tag +Inject bmap_alloc_minlen_extent error tag +* Create directory entries +Verify directory's extent count +* Rename: Populate destination directory +Populate $dstdir by moving new directory entries +Verify $dstdir's extent count +* Create multiple hard links to a single file +Create multiple hardlinks +Verify directory's extent count +* Create multiple symbolic links to a single file +Create multiple symbolic links +Verify directory's extent counttests/xfs/group +1
-0@@ -529,3 +529,4 @@ 529 auto quick realtime growfs 530 auto quick punch zero insert collapse 531 auto quick attr +532 auto quick dir hardlink symlinkSignature · 1 line
2.29.2
Re: [PATCH V5 09/13] xfs: Check for extent overflow when writing to unwritten extent
In reply to Chandan Babu RQuoted 5 lines · Chandan Babu R
This test verifies that XFS does not cause inode fork's extent count to overflow when writing to an unwritten extent.
Signed-off-by Chandan Babu R <[email protected]>---
Looks fine to me now,
--D
Quoted 126 lines
tests/xfs/533 | 84 +++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/533.out | 11 +++++++ tests/xfs/group | 1 + 3 files changed, 96 insertions(+) create mode 100755 tests/xfs/533 create mode 100644 tests/xfs/533.outtests/xfs/533 new file +84
-0@@ -0,0 +1,84 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 533 +# +# Verify that XFS does not cause inode fork's extent count to overflow when +# writing to an unwritten extent. +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/inject + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +_require_scratch +_require_xfs_debug +_require_xfs_io_command "falloc" +_require_xfs_io_error_injection "reduce_max_iextents" + +echo "Format and mount fs" +_scratch_mkfs_sized $((1024 * 1024 * 1024)) >> $seqres.full +_scratch_mount >> $seqres.full + +bsize=$(_get_file_block_size $SCRATCH_MNT) + +testfile=${SCRATCH_MNT}/testfile + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +nr_blks=15 + +for io in Buffered Direct; do + echo "* $io write to unwritten extent" + + echo "Fallocate $nr_blks blocks" + $XFS_IO_PROG -f -c "falloc 0 $((nr_blks * bsize))" $testfile >> $seqres.full + + if [[ $io == "Buffered" ]]; then + xfs_io_flag="" + else + xfs_io_flag="-d" + fi + + echo "$io write to every other block of fallocated space" + for i in $(seq 1 2 $((nr_blks - 1))); do + $XFS_IO_PROG -f -s $xfs_io_flag -c "pwrite $((i * bsize)) $bsize" \ + $testfile >> $seqres.full 2>&1 + [[ $? != 0 ]] && break + done + + echo "Verify \$testfile's extent count" + nextents=$(xfs_get_fsxattr nextents $testfile) + if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 + fi + + rm $testfile +done + +# success, all done +status=0 +exittests/xfs/533.out new file +11
-0@@ -0,0 +1,11 @@ +QA output created by 533 +Format and mount fs +Inject reduce_max_iextents error tag +* Buffered write to unwritten extent +Fallocate 15 blocks +Buffered write to every other block of fallocated space +Verify $testfile's extent count +* Direct write to unwritten extent +Fallocate 15 blocks +Direct write to every other block of fallocated space +Verify $testfile's extent counttests/xfs/group +1
-0@@ -530,3 +530,4 @@ 530 auto quick punch zero insert collapse 531 auto quick attr 532 auto quick dir hardlink symlink +533 auto quickSignature · 1 line
2.29.2
Re: [PATCH V5 10/13] xfs: Check for extent overflow when moving extent from cow to data fork
In reply to Chandan Babu RQuoted 4 lines · Chandan Babu R
This test verifies that XFS does not cause inode fork's extent count to overflow when writing to/funshare-ing a shared extent.
Signed-off-by Chandan Babu R <[email protected]>
Looks fine,
--D
Quoted 148 lines
--- tests/xfs/534 | 104 ++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/534.out | 12 ++++++ tests/xfs/group | 1 + 3 files changed, 117 insertions(+) create mode 100755 tests/xfs/534 create mode 100644 tests/xfs/534.outtests/xfs/534 new file +104
-0@@ -0,0 +1,104 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 534 +# +# Verify that XFS does not cause inode fork's extent count to overflow when +# writing to a shared extent. +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/inject + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +_require_scratch +_require_scratch_reflink +_require_xfs_debug +_require_xfs_io_command "reflink" +_require_xfs_io_command "funshare" +_require_xfs_io_error_injection "reduce_max_iextents" + +echo "Format and mount fs" +_scratch_mkfs_sized $((512 * 1024 * 1024)) >> $seqres.full +_scratch_mount >> $seqres.full + +bsize=$(_get_block_size $SCRATCH_MNT) + +nr_blks=15 + +srcfile=${SCRATCH_MNT}/srcfile +dstfile=${SCRATCH_MNT}/dstfile + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +echo "Create a \$srcfile having an extent of length $nr_blks blocks" +$XFS_IO_PROG -f -c "pwrite -b $((nr_blks * bsize)) 0 $((nr_blks * bsize))" \ + -c fsync $srcfile >> $seqres.full + +echo "* Write to shared extent" + +echo "Share the extent with \$dstfile" +_reflink $srcfile $dstfile >> $seqres.full + +echo "Buffered write to every other block of \$dstfile's shared extent" +for i in $(seq 1 2 $((nr_blks - 1))); do + $XFS_IO_PROG -f -s -c "pwrite $((i * bsize)) $bsize" $dstfile \ + >> $seqres.full 2>&1 + [[ $? != 0 ]] && break +done + +echo "Verify \$dstfile's extent count" +nextents=$(xfs_get_fsxattr nextents $dstfile) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +rm $dstfile + +echo "* Funshare shared extent" + +echo "Share the extent with \$dstfile" +_reflink $srcfile $dstfile >> $seqres.full + +echo "Funshare every other block of \$dstfile's shared extent" +for i in $(seq 1 2 $((nr_blks - 1))); do + $XFS_IO_PROG -f -s -c "funshare $((i * bsize)) $bsize" $dstfile \ + >> $seqres.full 2>&1 + [[ $? != 0 ]] && break +done + +echo "Verify \$dstfile's extent count" +nextents=$(xfs_get_fsxattr nextents $dstfile) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +# success, all done +status=0 +exit +tests/xfs/534.out new file +12
-0@@ -0,0 +1,12 @@ +QA output created by 534 +Format and mount fs +Inject reduce_max_iextents error tag +Create a $srcfile having an extent of length 15 blocks +* Write to shared extent +Share the extent with $dstfile +Buffered write to every other block of $dstfile's shared extent +Verify $dstfile's extent count +* Funshare shared extent +Share the extent with $dstfile +Funshare every other block of $dstfile's shared extent +Verify $dstfile's extent counttests/xfs/group +1
-0@@ -531,3 +531,4 @@ 531 auto quick attr 532 auto quick dir hardlink symlink 533 auto quick +534 auto quick reflinkSignature · 1 line
2.29.2
Re: [PATCH V5 11/13] xfs: Check for extent overflow when remapping an extent
In reply to Chandan Babu RQuoted 4 lines · Chandan Babu R
This test verifies that XFS does not cause inode fork's extent count to overflow when remapping extents from one file's inode fork to another.
Signed-off-by Chandan Babu R <[email protected]>
Seems sensible,
--D
Quoted 121 lines
--- tests/xfs/535 | 81 +++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/535.out | 8 +++++ tests/xfs/group | 1 + 3 files changed, 90 insertions(+) create mode 100755 tests/xfs/535 create mode 100644 tests/xfs/535.outtests/xfs/535 new file +81
-0@@ -0,0 +1,81 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2021 Chandan Babu R. All Rights Reserved. +# +# FS QA Test 535 +# +# Verify that XFS does not cause inode fork's extent count to overflow when +# remapping extents from one file's inode fork to another. +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/inject + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here + +_supported_fs xfs +_require_scratch +_require_scratch_reflink +_require_xfs_debug +_require_xfs_io_command "reflink" +_require_xfs_io_error_injection "reduce_max_iextents" + +echo "* Reflink remap extents" + +echo "Format and mount fs" +_scratch_mkfs >> $seqres.full +_scratch_mount >> $seqres.full + +bsize=$(_get_block_size $SCRATCH_MNT) + +srcfile=${SCRATCH_MNT}/srcfile +dstfile=${SCRATCH_MNT}/dstfile + +nr_blks=15 + +echo "Create \$srcfile having an extent of length $nr_blks blocks" +$XFS_IO_PROG -f -c "pwrite -b $((nr_blks * bsize)) 0 $((nr_blks * bsize))" \ + -c fsync $srcfile >> $seqres.full + +echo "Create \$dstfile having an extent of length $nr_blks blocks" +$XFS_IO_PROG -f -c "pwrite -b $((nr_blks * bsize)) 0 $((nr_blks * bsize))" \ + -c fsync $dstfile >> $seqres.full + +echo "Inject reduce_max_iextents error tag" +_scratch_inject_error reduce_max_iextents 1 + +echo "Reflink every other block from \$srcfile into \$dstfile" +for i in $(seq 1 2 $((nr_blks - 1))); do + _reflink_range $srcfile $((i * bsize)) $dstfile $((i * bsize)) $bsize \ + >> $seqres.full 2>&1 +done + +echo "Verify \$dstfile's extent count" +nextents=$(xfs_get_fsxattr nextents $dstfile) +if (( $nextents > 10 )); then + echo "Extent count overflow check failed: nextents = $nextents" + exit 1 +fi + +# success, all done +status=0 +exittests/xfs/535.out new file +8
-0@@ -0,0 +1,8 @@ +QA output created by 535 +* Reflink remap extents +Format and mount fs +Create $srcfile having an extent of length 15 blocks +Create $dstfile having an extent of length 15 blocks +Inject reduce_max_iextents error tag +Reflink every other block from $srcfile into $dstfile +Verify $dstfile's extent counttests/xfs/group +1
-0@@ -532,3 +532,4 @@ 532 auto quick dir hardlink symlink 533 auto quick 534 auto quick reflink +535 auto quick reflinkSignature · 1 line
2.29.2