Rectify spelling

Change  'stanalone'      to  'standalone'
Change  'mesaurement'    to  'measurement'
Change  'nonvilatile'    to  'nonvolatile'
Change  'unical'         to  'unique'
Change  'unaccesable'    to  'unaccessible'
Change  'correcpondent'  to  'correspond'

Signed-off-by Xiaofeng Cao <[email protected]>

---

 drivers/power/supply/max1721x_battery.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

drivers/power/supply/max1721x_battery.c +7 -7

index 1b1a36f8e929..473e53cd2801 100644
@@ -1,6 +1,6 @@
 /*
  * 1-Wire implementation for Maxim Semiconductor
- * MAX7211/MAX17215 stanalone fuel gauge chip
+ * MAX7211/MAX17215 standalone fuel gauge chip
  *
  * Copyright (C) 2017 Radioavionica Corporation
  * Author: Alex A. Mihaylov <[email protected]>

@@ -28,7 +28,7 @@
 /* Number of valid register addresses in W1 mode */
 #define MAX1721X_MAX_REG_NR	0x1EF
 
-/* Factory settings (nonvilatile registers) (W1 specific) */
+/* Factory settings (nonvolatile registers) (W1 specific) */
 #define MAX1721X_REG_NRSENSE	0x1CF	/* RSense in 10^-5 Ohm */
 /* Strings */
 #define MAX1721X_REG_MFG_STR	0x1CC

@@ -105,7 +105,7 @@ static inline int max172xx_temperature_to_ps(unsigned int reg)
 /*
  * Calculating current registers resolution:
  *
- * RSense stored in 10^-5 Ohm, so mesaurment voltage must be
+ * RSense stored in 10^-5 Ohm, so measurement voltage must be
  * in 10^-11 Volts for get current in uA.
  * 16 bit current reg fullscale +/-51.2mV is 102400 uV.
  * So: 102400 / 65535 * 10^5 = 156252

@@ -137,7 +137,7 @@ static int max1721x_battery_get_property(struct power_supply *psy,
 		/*
 		 * POWER_SUPPLY_PROP_PRESENT will always readable via
 		 * sysfs interface. Value return 0 if battery not
-		 * present or unaccesable via W1.
+		 * present or unaccessible via W1.
 		 */
 		val->intval =
 			regmap_read(info->regmap, MAX172XX_REG_STATUS,

@@ -334,9 +334,9 @@ static int devm_w1_max1721x_add_device(struct w1_slave *sl)
 
 	/*
 	 * power_supply class battery name translated from W1 slave device
-	 * unical ID (look like 26-0123456789AB) to "max1721x-0123456789AB\0"
-	 * so, 26 (device family) correcpondent to max1721x devices.
-	 * Device name still unical for any numbers connected devices.
+	 * unique ID (look like 26-0123456789AB) to "max1721x-0123456789AB\0"
+	 * so, 26 (device family) correspond to max1721x devices.
+	 * Device name still unique for any number of connected devices.
 	 */
 	snprintf(info->name, sizeof(info->name),
 		"max1721x-%012X", (unsigned int)sl->reg_num.id);

Signature · 1 line

2.25.1