iommu/amd: Fix iommu remap panic while amd_iommu is set to disable
Subsystems (3)
PATCH 1/1 iommu/amd: Fix iommu remap panic while amd_iommu is set to disable
While amd_iommu is set to disable in cmd line, it will free the iommu resources. Then the pages of rlookup table is freed as well. If that, we have to check rlookup table in irq_remapping_select(), otherwise, it will trigger a kernel panic below.
[ 2.245855] BUG: kernel NULL pointer dereference, address: 0000000000000500 [ 2.252861] #PF: supervisor read access in kernel mode [ 2.258053] #PF: error_code(0x0000) - not-present page [ 2.263247] PGD 0 P4D 0 [ 2.265844] Oops: 0000 [#1] SMP NOPTI [ 2.269570] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.11.0-custom #1 [ 2.276150] Hardware name: AMD Chachani-VN/Chachani-VN, BIOS VCH162755N.FD 03/04/2021 [ 2.284085] RIP: 0010:irq_remapping_select+0x5c/0xb0 [ 2.289107] Code: 4b 0c 48 3d 70 7c c8 8f 75 0d eb 35 48 8b 00 48 3d 70 7c c8 8f 74 2a 0f b6 50 10 39 d1 75 ed 0f b7 40 12 48 8b 15 f4 8a 3b 02 <48> 8b 14 c2 48 85 d2 74 0e b8 01 00 00 00 4c 3b a2 90 04 00 00 74 [ 2.307999] RSP: 0000:ffffffff8f403d40 EFLAGS: 00010246 [ 2.313285] RAX: 00000000000000a0 RBX: ffffffff8f403d98 RCX: 0000000000000021 [ 2.320471] RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff8cbb4006118a [ 2.327658] RBP: ffffffff8f403d50 R08: 0000000000000021 R09: 0000000000000002 [ 2.334838] R10: 000000000000000a R11: f000000000000000 R12: ffff8cbb401bfe40 [ 2.342022] R13: 0000000000000000 R14: ffff8cbb401be900 R15: 0000000000000000 [ 2.349210] FS: 0000000000000000(0000) GS:ffff8cbd73e00000(0000) knlGS:0000000000000000 [ 2.357399] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.363198] CR2: 0000000000000500 CR3: 00000002dae0a000 CR4: 00000000000406b0 [ 2.370382] Call Trace: [ 2.372897] irq_find_matching_fwspec+0x48/0xd0 [ 2.377489] mp_irqdomain_create+0x7c/0x180 [ 2.381736] ? __raw_callee_save___native_queued_spin_unlock+0x15/0x23 [ 2.388320] setup_IO_APIC+0x81/0x875 [ 2.392048] ? clear_IO_APIC_pin+0xd6/0x130 [ 2.396294] ? clear_IO_APIC+0x39/0x60 [ 2.400103] apic_intr_mode_init+0x107/0x10a [ 2.404432] x86_late_time_init+0x24/0x35 [ 2.408507] start_kernel+0x509/0x5c7 [ 2.412230] x86_64_start_reservations+0x24/0x26 [ 2.416911] x86_64_start_kernel+0x75/0x79 [ 2.421068] secondary_startup_64_no_verify+0xb0/0xbb
--- drivers/iommu/amd/iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iommu/amd/iommu.c +1 -1
@@ -3862,7 +3862,7 @@ static int irq_remapping_select(struct irq_domain *d, struct irq_fwspec *fwspec,else if (x86_fwspec_is_hpet (fwspec)) devid =get_hpet_devid (fwspec->param[0 ]); -if (devid <0 ) +if (devid <0 || !amd_iommu_rlookup_table)return 0 ; iommu = amd_iommu_rlookup_table[devid];
Signature · 6 lines
2.25.1 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
Hi Huang,
drivers/iommu/amd/iommu.c static int irq_remapping_select(struct irq_domain *d, struct irq_fwspec *fwspec, · line 3866
Quoted 11 lines · Huang Rui
drivers/iommu/amd/iommu.c +1
-1@@ -3862,7 +3862,7 @@ static int irq_remapping_select(struct irq_domain *d, struct irq_fwspec *fwspec,else if (x86_fwspec_is_hpet (fwspec)) devid =get_hpet_devid (fwspec->param[0 ]); -if (devid <0 ) +if (devid <0 || !amd_iommu_rlookup_table)return 0 ;
The problem is deeper than this fix suggests. I prepared other fixes for this particular problem. Please find them here:
https://git.kernel.org/pub/scm/linux/kernel/git/joro/linux.git/log/?h=iommu-fixes
Regards,
Joerg
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Quoted 11 lines · Joerg Roedel
Hi Huang,
Quoted 8 lines · Huang Rui
drivers/iommu/amd/iommu.c +0
-0@@ -3862,7 +3862,7 @@ static int irq_remapping_select(struct irq_domain *d, struct irq_fwspec *fwspec,else if (x86_fwspec_is_hpet (fwspec)) devid =get_hpet_devid (fwspec->param[0 ]);
Quoted 7 lines
drivers/iommu/amd/iommu.c static int irq_remapping_select(struct irq_domain *d, struct irq_fwspec *fwspec, · line 3866
Quoted 3 lines
drivers/iommu/amd/iommu.c +1
-1-if (devid <0 ) +if (devid <0 || !amd_iommu_rlookup_table)return 0 ;The problem is deeper than this fix suggests. I prepared other fixes for this particular problem. Please find them here:
Thanks for the comments. Could you please elaborate this?
Do you mean while amd_iommu=off, we won't prepare the IVRS, and even needn't get all ACPI talbes. Because they are never be used and the next state will always goes into IOMMU_CMDLINE_DISABLED, am I right?
Thanks,
Ray
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Quoted 5 lines · Huang Rui
Thanks for the comments. Could you please elaborate this?
Do you mean while amd_iommu=off, we won't prepare the IVRS, and even needn't get all ACPI talbes. Because they are never be used and the next state will always goes into
IOMMU_CMDLINE_DISABLED, am I right?
The first problem was that amd_iommu_irq_remap is never set back to false when irq-remapping initialization fails in amd_iommu_prepare().
But there are other problems, like that even when the IOMMU is set to disabled on the command line with amd_iommu=off, the code still sets up all IOMMUs and registers IRQ domains for them.
Later the code checks wheter the IOMMU should stay disabled and tears everything down, except for the IRQ domains, which stay in the global list.
The APIs do not really support tearing down IRQ domains well, so its not so easy to add this to the tear-down path. Now that the IRQ domains stay in the list, the ACPI code will come along later and calls the ->select() call-back for every IRQ domain, which gets execution to irq_remapping_select(), depite IOMMU being disabled and amd_iommu_rlookup_table already de-allocated. But since amd_iommu_irq_remap is still true the NULL pointer is dereferenced, causing the crash.
When the IRQ domains would not be around, this would also not happen. So my patches also change the initializtion to not do all the setup work when amd_iommu=off was passed on the command line.
Regards,
Joerg
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Quoted 7 lines · Joerg Roedel
Quoted 5 lines · Huang Rui
Thanks for the comments. Could you please elaborate this?
Do you mean while amd_iommu=off, we won't prepare the IVRS, and even needn't get all ACPI talbes. Because they are never be used and the next state will always goes into
IOMMU_CMDLINE_DISABLED, am I right?
Quoted 7 lines
The first problem was that
amd_iommu_irq_remapis never set back to false when irq-remapping initialization fails inamd_iommu_prepare().But there are other problems, like that even when the IOMMU is set to disabled on the command line with amd_iommu=off, the code still sets up all IOMMUs and registers IRQ domains for them.
Yes, that was the problem I found in my side. No very clear about the orignal intention. But if you said this is a problem, that makes sense...
Quoted 4 lines
Later the code checks wheter the IOMMU should stay disabled and tears everything down, except for the IRQ domains, which stay in the global list.
Quoted 8 lines
The APIs do not really support tearing down IRQ domains well, so its not so easy to add this to the tear-down path. Now that the IRQ domains stay in the list, the ACPI code will come along later and calls the ->select() call-back for every IRQ domain, which gets execution to
irq_remapping_select(), depite IOMMU being disabled andamd_iommu_rlookup_tablealready de-allocated. But sinceamd_iommu_irq_remapis still true the NULL pointer is dereferenced, causing the crash.
OK. We found some memleaks here before as well. It looks cause by iommu data buffer initialization and not be cleared. And yes, if setup iommu here, it actually causes many issues.
unreferenced object 0xffff888332047500 (size 224):
comm "swapper/0", pid 0, jiffies 4294892296 (age 362.192s) hex dump (first 32 bytes):
b0 22 03 00 00 00 00 00 00 00 00 40 00 00 00 00 .".........@....
06 00 00 00 00 00 00 00 00 20 00 00 00 20 00 00 ......... ... ..
backtrace:
[<000000008f162024>] kmem_cache_alloc+0x145/0x440
[<00000000420093ba>] kmem_cache_create_usercopy+0x127/0x2c0
[<00000000f5ed7ff0>] kmem_cache_create+0x16/0x20
[<000000004c1e4f47>] iommu_go_to_state+0x8e4/0x165d
[<00000000a191b705>] amd_iommu_prepare+0x1a/0x2f
[<00000000afe5b97e>] irq_remapping_prepare+0x35/0x6d
[<00000000209f36b5>] enable_IR_x2apic+0x2b/0x1ae
[<00000000b64491b5>] default_setup_apic_routing+0x16/0x65
[<00000000e89c64a1>] apic_intr_mode_init+0x81/0x10a
[<00000000eaa14bf6>] x86_late_time_init+0x24/0x35
[<00000000e291fc71>] start_kernel+0x509/0x5c7
[<0000000099930dfe>] x86_64_start_reservations+0x24/0x26
[<00000000b369765d>] x86_64_start_kernel+0x75/0x79
[<000000004f411919>] secondary_startup_64_no_verify+0xb0/0xbbQuoted 5 lines
When the IRQ domains would not be around, this would also not happen. So my patches also change the initializtion to not do all the setup work when amd_iommu=off was passed on the command line.
Thanks for the fix and explaination. :-)
Best Regards,
Ray
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu