Skip to contentSkip to conversation

Introduce devm_pm_opp_* API

PATCH Superseded Dmitry Osipenko 4 participants 22 messages Mar 11, 2021 – Mar 12, 2021

Subsystems (20)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover Introduce devm_pm_opp_* API

This series adds resource-managed OPP API helpers and makes drivers to use them.

Changelog:

v2: - This is a continuation of the work that was started by Yangtao Li.
Apparently Yangtao doesn't have time to finish it, so I (Dmitry Osipenko) picked up the effort since these patches are wanted by the NVIDIA Tegra voltage-scaling series that I'm working on.

- Fixed the double put of OPP resources.

- Dropped all patches that are unrelated to OPP API. I also dropped the Tegra memory patch since it doesn't apply now and because I plan to switch all Tegra drivers soon to a common tegra-specific OPP helper that will use the resource-managed OPP API anyways.

- Squashed couple patches into a single ones since there was no good reason to separate them.

- Added acks that were given to a couple of v1 patches.

Yangtao Li (14):
opp: Add devres wrapper for dev_pm_opp_set_clkname
opp: Add devres wrapper for dev_pm_opp_set_regulators
opp: Add devres wrapper for dev_pm_opp_set_supported_hw
opp: Add devres wrapper for dev_pm_opp_of_add_table
opp: Add devres wrapper for dev_pm_opp_register_notifier
serial: qcom_geni_serial: Convert to use resource-managed OPP API
spi: spi-geni-qcom: Convert to use resource-managed OPP API
spi: spi-qcom-qspi: Convert to use resource-managed OPP API
mmc: sdhci-msm: Convert to use resource-managed OPP API drm/msm: Convert to use resource-managed OPP API drm/lima: Convert to use resource-managed OPP API drm/panfrost: Convert to use resource-managed OPP API
media: venus: Convert to use resource-managed OPP API
memory: samsung: exynos5422-dmc: Convert to use resource-managed OPP
API

 drivers/gpu/drm/lima/lima_devfreq.c           |  43 ++---
 drivers/gpu/drm/lima/lima_devfreq.h           |   2 -
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c         |   2 +-
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c         |   2 +-
 drivers/gpu/drm/msm/adreno/adreno_gpu.c       |   2 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |  24 ++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h       |   2 -
 drivers/gpu/drm/msm/dp/dp_ctrl.c              |  31 +---
 drivers/gpu/drm/msm/dp/dp_ctrl.h              |   1 -
 drivers/gpu/drm/msm/dp/dp_display.c           |   5 +-
 drivers/gpu/drm/msm/dsi/dsi_host.c            |  14 +-
 drivers/gpu/drm/panfrost/panfrost_devfreq.c   |  33 +---
 drivers/gpu/drm/panfrost/panfrost_devfreq.h   |   1 -
 .../media/platform/qcom/venus/pm_helpers.c    |  18 +--
 drivers/memory/samsung/exynos5422-dmc.c       |  13 +-
 drivers/mmc/host/sdhci-msm.c                  |  20 +--
 drivers/opp/core.c                            | 151 ++++++++++++++++++
 drivers/opp/of.c                              |  36 +++++
 drivers/spi/spi-geni-qcom.c                   |  17 +-
 drivers/spi/spi-qcom-qspi.c                   |  19 +--
 drivers/tty/serial/qcom_geni_serial.c         |  24 ++-
 include/linux/pm_opp.h                        |  34 ++++
 include/linux/qcom-geni-se.h                  |   2 -
 23 files changed, 300 insertions(+), 196 deletions(-)
Signature · 6 lines
2.29.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw

PATCH v2 1/14 opp: Add devres wrapper for dev_pm_opp_set_clkname

From: Yangtao Li <[email protected]>

Add devres wrapper for dev_pm_opp_set_clkname() to simplify drivers code.

---
 drivers/opp/core.c     | 36 ++++++++++++++++++++++++++++++++++++
 include/linux/pm_opp.h |  6 ++++++
 2 files changed, 42 insertions(+)
drivers/opp/core.c +36 -0
index 150be4c28c99..3345ab8da6b2 100644
@@ -2119,6 +2119,42 @@ void dev_pm_opp_put_clkname(struct opp_table *opp_table)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_put_clkname);
 
+static void devm_pm_opp_clkname_release(void *data)
+{
+	dev_pm_opp_put_clkname(data);
+}
+
+/**
+ * devm_pm_opp_set_clkname() - Set clk name for the device
+ * @dev: Device for which clk name is being set.
+ * @name: Clk name.
+ *
+ * In order to support OPP switching, OPP layer needs to get pointer to the
+ * clock for the device. Simple cases work fine without using this routine (i.e.
+ * by passing connection-id as NULL), but for a device with multiple clocks
+ * available, the OPP core needs to know the exact name of the clk to use.
+ *
+ * This must be called before any OPPs are initialized for the device.
+ *
+ * The opp_table structure will be freed after the device is destroyed.
+ */
+struct opp_table *devm_pm_opp_set_clkname(struct device *dev, const char *name)
+{
+	struct opp_table *opp_table;
+	int err;
+
+	opp_table = dev_pm_opp_set_clkname(dev, name);
+	if (IS_ERR(opp_table))
+		return opp_table;
+
+	err = devm_add_action_or_reset(dev, devm_pm_opp_clkname_release, opp_table);
+	if (err)
+		opp_table = ERR_PTR(err);
+
+	return opp_table;
+}
+EXPORT_SYMBOL_GPL(devm_pm_opp_set_clkname);
+
 /**
  * dev_pm_opp_register_set_opp_helper() - Register custom set OPP helper
  * @dev: Device for which the helper is getting registered.
include/linux/pm_opp.h +6 -0
index c0371efa4a0f..6fb992168f1e 100644
@@ -150,6 +150,7 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev, const char * con
 void dev_pm_opp_put_regulators(struct opp_table *opp_table);
 struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name);
 void dev_pm_opp_put_clkname(struct opp_table *opp_table);
+struct opp_table *devm_pm_opp_set_clkname(struct device *dev, const char *name);
 struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data));
 void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table);
 struct opp_table *devm_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data));
@@ -355,6 +356,11 @@ static inline struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const
 
 static inline void dev_pm_opp_put_clkname(struct opp_table *opp_table) {}
 
+static inline struct opp_table *devm_pm_opp_set_clkname(struct device *dev, const char *name)
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
+
 static inline struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char **names, struct device ***virt_devs)
 {
 	return ERR_PTR(-EOPNOTSUPP);
Signature · 6 lines
2.29.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#2 lore raw

Re: [PATCH v2 01/14] opp: Add devres wrapper for dev_pm_opp_set_clkname

Quoted 5 lines · Dmitry Osipenko
drivers/opp/core.c +5 -0
+struct opp_table *devm_pm_opp_set_clkname(struct device *dev, const char *name)
+{
+	struct opp_table *opp_table;
+	int err;
+

drivers/opp/core.c void dev_pm_opp_put_clkname(struct opp_table *opp_table) · line 2155

Quoted 10 lines
drivers/opp/core.c +10 -0
+	opp_table = dev_pm_opp_set_clkname(dev, name);
+	if (IS_ERR(opp_table))
+		return opp_table;
+
+	err = devm_add_action_or_reset(dev, devm_pm_opp_clkname_release, opp_table);
+	if (err)
+		opp_table = ERR_PTR(err);
+
+	return opp_table;
+}

I wonder if we still need to return opp_table from here, or a simple integer is fine.. The callers shouldn't be required to use the OPP table directly anymore I believe and so better simplify the return part of this and all other routines you are adding here..

If there is a user which needs the opp_table, let it use the regular non-devm variant.

Signature · 5 lines
viresh
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#3 lore raw

Re: [PATCH v2 01/14] opp: Add devres wrapper for dev_pm_opp_set_clkname

Quoted 14 lines · Viresh Kumar
Quoted 12 lines · Dmitry Osipenko
drivers/opp/core.c +12 -0
+struct opp_table *devm_pm_opp_set_clkname(struct device *dev, const char *name)
+{
+     struct opp_table *opp_table;
+     int err;
+
+     opp_table = dev_pm_opp_set_clkname(dev, name);
+     if (IS_ERR(opp_table))
+             return opp_table;
+
+     err = devm_add_action_or_reset(dev, devm_pm_opp_clkname_release, opp_table);
+     if (err)
+             opp_table = ERR_PTR(err);
Quoted 8 lines

drivers/opp/core.c void dev_pm_opp_put_clkname(struct opp_table *opp_table) · line 2155

Quoted 3 lines
drivers/opp/core.c +3 -0
+
+     return opp_table;
+}

I wonder if we still need to return opp_table from here, or a simple integer is fine.. The callers shouldn't be required to use the OPP table directly anymore I believe and so better simplify the return part of this and all other routines you are adding here..

Yes, please. I was thinking along the same lines, when I reviewed the mmc patch (patch9).

Quoted 3 lines

If there is a user which needs the opp_table, let it use the regular non-devm variant.

Kind regards
Uffe

#4 lore raw

Re: [PATCH v2 01/14] opp: Add devres wrapper for dev_pm_opp_set_clkname

12.03.2021 13:36, Ulf Hansson пишет:

Quoted 24 lines · Viresh Kumar
Quoted 14 lines · Dmitry Osipenko
Quoted 12 lines
drivers/opp/core.c +12 -0
+struct opp_table *devm_pm_opp_set_clkname(struct device *dev, const char *name)
+{
+     struct opp_table *opp_table;
+     int err;
+
+     opp_table = dev_pm_opp_set_clkname(dev, name);
+     if (IS_ERR(opp_table))
+             return opp_table;
+
+     err = devm_add_action_or_reset(dev, devm_pm_opp_clkname_release, opp_table);
+     if (err)
+             opp_table = ERR_PTR(err);
Quoted 8 lines

drivers/opp/core.c void dev_pm_opp_put_clkname(struct opp_table *opp_table) · line 2155

Quoted 3 lines
drivers/opp/core.c +3 -0
+
+     return opp_table;
+}

I wonder if we still need to return opp_table from here, or a simple integer is fine.. The callers shouldn't be required to use the OPP table directly anymore I believe and so better simplify the return part of this and all other routines you are adding here..

Quoted 6 lines

Yes, please. I was thinking along the same lines, when I reviewed the mmc patch (patch9).

Quoted 3 lines

If there is a user which needs the opp_table, let it use the regular non-devm variant.

Indeed, that's a very good suggestion! The opp_table isn't needed by the devm users, I'll change it in v3, thanks!
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#5 lore raw

PATCH v2 2/14 opp: Add devres wrapper for dev_pm_opp_set_regulators

In reply to Dmitry Osipenko

From: Yangtao Li <[email protected]>

Add devres wrapper for dev_pm_opp_set_regulators() to simplify drivers code.

---
 drivers/opp/core.c     | 39 +++++++++++++++++++++++++++++++++++++++
 include/linux/pm_opp.h |  8 ++++++++
 2 files changed, 47 insertions(+)
drivers/opp/core.c +39 -0
index 3345ab8da6b2..32fa2bff847b 100644
@@ -2047,6 +2047,45 @@ void dev_pm_opp_put_regulators(struct opp_table *opp_table)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulators);
 
+static void devm_pm_opp_regulators_release(void *data)
+{
+	dev_pm_opp_put_regulators(data);
+}
+
+/**
+ * devm_pm_opp_set_regulators() - Set regulator names for the device
+ * @dev: Device for which regulator name is being set.
+ * @names: Array of pointers to the names of the regulator.
+ * @count: Number of regulators.
+ *
+ * In order to support OPP switching, OPP layer needs to know the name of the
+ * device's regulators, as the core would be required to switch voltages as
+ * well.
+ *
+ * This must be called before any OPPs are initialized for the device.
+ *
+ * The opp_table structure will be freed after the device is destroyed.
+ */
+struct opp_table *devm_pm_opp_set_regulators(struct device *dev,
+					     const char * const names[],
+					     unsigned int count)
+{
+	struct opp_table *opp_table;
+	int err;
+
+	opp_table = dev_pm_opp_set_regulators(dev, names, count);
+	if (IS_ERR(opp_table))
+		return opp_table;
+
+	err = devm_add_action_or_reset(dev, devm_pm_opp_regulators_release,
+				       opp_table);
+	if (err)
+		opp_table = ERR_PTR(err);
+
+	return opp_table;
+}
+EXPORT_SYMBOL_GPL(devm_pm_opp_set_regulators);
+
 /**
  * dev_pm_opp_set_clkname() - Set clk name for the device
  * @dev: Device for which clk name is being set.
include/linux/pm_opp.h +8 -0
index 6fb992168f1e..284d23665b15 100644
@@ -148,6 +148,7 @@ struct opp_table *dev_pm_opp_set_prop_name(struct device *dev, const char *name)
 void dev_pm_opp_put_prop_name(struct opp_table *opp_table);
 struct opp_table *dev_pm_opp_set_regulators(struct device *dev, const char * const names[], unsigned int count);
 void dev_pm_opp_put_regulators(struct opp_table *opp_table);
+struct opp_table *devm_pm_opp_set_regulators(struct device *dev, const char * const names[], unsigned int count);
 struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name);
 void dev_pm_opp_put_clkname(struct opp_table *opp_table);
 struct opp_table *devm_pm_opp_set_clkname(struct device *dev, const char *name);
@@ -349,6 +350,13 @@ static inline struct opp_table *dev_pm_opp_set_regulators(struct device *dev, co
 
 static inline void dev_pm_opp_put_regulators(struct opp_table *opp_table) {}
 
+static inline struct opp_table *devm_pm_opp_set_regulators(struct device *dev,
+							   const char * const names[],
+							   unsigned int count)
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
+
 static inline struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name)
 {
 	return ERR_PTR(-EOPNOTSUPP);
Signature · 6 lines
2.29.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#6 lore raw

PATCH v2 3/14 opp: Add devres wrapper for dev_pm_opp_set_supported_hw

In reply to Dmitry Osipenko

From: Yangtao Li <[email protected]>

Add devres wrapper for dev_pm_opp_set_supported_hw() to simplify driver code.

---
 drivers/opp/core.c     | 38 ++++++++++++++++++++++++++++++++++++++
 include/linux/pm_opp.h |  8 ++++++++
 2 files changed, 46 insertions(+)
drivers/opp/core.c +38 -0
index 32fa2bff847b..f9e4ebb7aad0 100644
@@ -1857,6 +1857,44 @@ void dev_pm_opp_put_supported_hw(struct opp_table *opp_table)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_put_supported_hw);
 
+static void devm_pm_opp_supported_hw_release(void *data)
+{
+	dev_pm_opp_put_supported_hw(data);
+}
+
+/**
+ * devm_pm_opp_set_supported_hw() - Set supported platforms
+ * @dev: Device for which supported-hw has to be set.
+ * @versions: Array of hierarchy of versions to match.
+ * @count: Number of elements in the array.
+ *
+ * This is required only for the V2 bindings, and it enables a platform to
+ * specify the hierarchy of versions it supports. OPP layer will then enable
+ * OPPs, which are available for those versions, based on its 'opp-supported-hw'
+ * property.
+ *
+ * The opp_table structure will be freed after the device is destroyed.
+ */
+struct opp_table *devm_pm_opp_set_supported_hw(struct device *dev,
+					       const u32 *versions,
+					       unsigned int count)
+{
+	struct opp_table *opp_table;
+	int err;
+
+	opp_table = dev_pm_opp_set_supported_hw(dev, versions, count);
+	if (IS_ERR(opp_table))
+		return opp_table;
+
+	err = devm_add_action_or_reset(dev, devm_pm_opp_supported_hw_release,
+				       opp_table);
+	if (err)
+		opp_table = ERR_PTR(err);
+
+	return opp_table;
+}
+EXPORT_SYMBOL_GPL(devm_pm_opp_set_supported_hw);
+
 /**
  * dev_pm_opp_set_prop_name() - Set prop-extn name
  * @dev: Device for which the prop-name has to be set.
include/linux/pm_opp.h +8 -0
index 284d23665b15..e68c3c29301e 100644
@@ -144,6 +144,7 @@ int dev_pm_opp_unregister_notifier(struct device *dev, struct notifier_block *nb
 
 struct opp_table *dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions, unsigned int count);
 void dev_pm_opp_put_supported_hw(struct opp_table *opp_table);
+struct opp_table *devm_pm_opp_set_supported_hw(struct device *dev, const u32 *versions, unsigned int count);
 struct opp_table *dev_pm_opp_set_prop_name(struct device *dev, const char *name);
 void dev_pm_opp_put_prop_name(struct opp_table *opp_table);
 struct opp_table *dev_pm_opp_set_regulators(struct device *dev, const char * const names[], unsigned int count);
@@ -321,6 +322,13 @@ static inline struct opp_table *dev_pm_opp_set_supported_hw(struct device *dev,
 
 static inline void dev_pm_opp_put_supported_hw(struct opp_table *opp_table) {}
 
+static inline struct opp_table *devm_pm_opp_set_supported_hw(struct device *dev,
+							     const u32 *versions,
+							     unsigned int count)
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
+
 static inline struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev,
 			int (*set_opp)(struct dev_pm_set_opp_data *data))
 {
Signature · 6 lines
2.29.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#7 lore raw

PATCH v2 4/14 opp: Add devres wrapper for dev_pm_opp_of_add_table

In reply to Dmitry Osipenko

From: Yangtao Li <[email protected]>

Add devres wrapper for dev_pm_opp_of_add_table() to simplify driver code.

---
 drivers/opp/of.c       | 36 ++++++++++++++++++++++++++++++++++++
 include/linux/pm_opp.h |  6 ++++++
 2 files changed, 42 insertions(+)
drivers/opp/of.c +36 -0
index f480c10e6314..c582a9ca397b 100644
@@ -1104,6 +1104,42 @@ static int _of_add_table_indexed(struct device *dev, int index, bool getclk)
 	return ret;
 }
 
+static void devm_pm_opp_of_table_release(void *data)
+{
+	dev_pm_opp_of_remove_table(data);
+}
+
+/**
+ * devm_pm_opp_of_add_table() - Initialize opp table from device tree
+ * @dev:	device pointer used to lookup OPP table.
+ *
+ * Register the initial OPP table with the OPP library for given device.
+ *
+ * The opp_table structure will be freed after the device is destroyed.
+ *
+ * Return:
+ * 0		On success OR
+ *		Duplicate OPPs (both freq and volt are same) and opp->available
+ * -EEXIST	Freq are same and volt are different OR
+ *		Duplicate OPPs (both freq and volt are same) and !opp->available
+ * -ENOMEM	Memory allocation failure
+ * -ENODEV	when 'operating-points' property is not found or is invalid data
+ *		in device node.
+ * -ENODATA	when empty 'operating-points' property is found
+ * -EINVAL	when invalid entries are found in opp-v2 table
+ */
+int devm_pm_opp_of_add_table(struct device *dev)
+{
+	int ret;
+
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, devm_pm_opp_of_table_release, dev);
+}
+EXPORT_SYMBOL_GPL(devm_pm_opp_of_add_table);
+
 /**
  * dev_pm_opp_of_add_table() - Initialize opp table from device tree
  * @dev:	device pointer used to lookup OPP table.
include/linux/pm_opp.h +6 -0
index e68c3c29301e..2f5dc123c1a0 100644
@@ -441,6 +441,7 @@ int dev_pm_opp_of_add_table(struct device *dev);
 int dev_pm_opp_of_add_table_indexed(struct device *dev, int index);
 int dev_pm_opp_of_add_table_noclk(struct device *dev, int index);
 void dev_pm_opp_of_remove_table(struct device *dev);
+int devm_pm_opp_of_add_table(struct device *dev);
 int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask);
 void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask);
 int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask);
@@ -473,6 +474,11 @@ static inline void dev_pm_opp_of_remove_table(struct device *dev)
 {
 }
 
+static inline int devm_pm_opp_of_add_table(struct device *dev)
+{
+	return -EOPNOTSUPP;
+}
+
 static inline int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask)
 {
 	return -EOPNOTSUPP;
Signature · 6 lines
2.29.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#8 lore raw

PATCH v2 5/14 opp: Add devres wrapper for dev_pm_opp_register_notifier

In reply to Dmitry Osipenko

From: Yangtao Li <[email protected]>

Add devres wrapper for dev_pm_opp_register_notifier() to simplify driver code.

---
 drivers/opp/core.c     | 38 ++++++++++++++++++++++++++++++++++++++
 include/linux/pm_opp.h |  6 ++++++
 2 files changed, 44 insertions(+)
drivers/opp/core.c +38 -0
index f9e4ebb7aad0..509b2e052f3c 100644
@@ -2899,6 +2899,44 @@ int dev_pm_opp_unregister_notifier(struct device *dev,
 }
 EXPORT_SYMBOL(dev_pm_opp_unregister_notifier);
 
+static void devm_pm_opp_notifier_release(struct device *dev, void *res)
+{
+	struct notifier_block *nb = *(struct notifier_block **)res;
+
+	WARN_ON(dev_pm_opp_unregister_notifier(dev, nb));
+}
+
+/**
+ * devm_pm_opp_register_notifier() - Register OPP notifier for the device
+ * @dev:	Device for which notifier needs to be registered
+ * @nb:		Notifier block to be registered
+ *
+ * Return: 0 on success or a negative error value.
+ *
+ * The notifier will be unregistered after the device is destroyed.
+ */
+int devm_pm_opp_register_notifier(struct device *dev, struct notifier_block *nb)
+{
+	struct notifier_block **ptr;
+	int ret;
+
+	ptr = devres_alloc(devm_pm_opp_notifier_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	ret = dev_pm_opp_register_notifier(dev, nb);
+	if (ret) {
+		devres_free(ptr);
+		return ret;
+	}
+
+	*ptr = nb;
+	devres_add(dev, ptr);
+
+	return 0;
+}
+EXPORT_SYMBOL(devm_pm_opp_register_notifier);
+
 /**
  * dev_pm_opp_remove_table() - Free all OPPs associated with the device
  * @dev:	device pointer used to lookup OPP table.
include/linux/pm_opp.h +6 -0
index 2f5dc123c1a0..7088997491b2 100644
@@ -141,6 +141,7 @@ int dev_pm_opp_disable(struct device *dev, unsigned long freq);
 
 int dev_pm_opp_register_notifier(struct device *dev, struct notifier_block *nb);
 int dev_pm_opp_unregister_notifier(struct device *dev, struct notifier_block *nb);
+int devm_pm_opp_register_notifier(struct device *dev, struct notifier_block *nb);
 
 struct opp_table *dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions, unsigned int count);
 void dev_pm_opp_put_supported_hw(struct opp_table *opp_table);
@@ -313,6 +314,11 @@ static inline int dev_pm_opp_unregister_notifier(struct device *dev, struct noti
 	return -EOPNOTSUPP;
 }
 
+static inline int devm_pm_opp_register_notifier(struct device *dev, struct notifier_block *nb)
+{
+	return -EOPNOTSUPP;
+}
+
 static inline struct opp_table *dev_pm_opp_set_supported_hw(struct device *dev,
 							    const u32 *versions,
 							    unsigned int count)
Signature · 6 lines
2.29.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#9 lore raw

Re: [PATCH v2 05/14] opp: Add devres wrapper for dev_pm_opp_register_notifier

Quoted 11 lines · Dmitry Osipenko

From: Yangtao Li <[email protected]>

Add devres wrapper for dev_pm_opp_register_notifier() to simplify driver code.

---
 drivers/opp/core.c     | 38 ++++++++++++++++++++++++++++++++++++++
 include/linux/pm_opp.h |  6 ++++++
 2 files changed, 44 insertions(+)

As I said in the previous version, I am not sure if we need this patch at all. This has only one user.

Signature · 5 lines
viresh
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#10 lore raw

Re: [PATCH v2 05/14] opp: Add devres wrapper for dev_pm_opp_register_notifier

12.03.2021 08:26, Viresh Kumar пишет:

Quoted 13 lines · Dmitry Osipenko
Quoted 11 lines

From: Yangtao Li <[email protected]>

Add devres wrapper for dev_pm_opp_register_notifier() to simplify driver code.

---
 drivers/opp/core.c     | 38 ++++++++++++++++++++++++++++++++++++++
 include/linux/pm_opp.h |  6 ++++++
 2 files changed, 44 insertions(+)
Quoted 3 lines

As I said in the previous version, I am not sure if we need this patch at all. This has only one user.

I'll drop this patch in v3, thanks.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#11 lore raw

PATCH v2 6/14 serial: qcom_geni_serial: Convert to use resource-managed OPP API

In reply to Dmitry Osipenko

From: Yangtao Li <[email protected]>

Use resource-managed OPP API to simplify code.

---
 drivers/tty/serial/qcom_geni_serial.c | 24 +++++++++---------------
 1 file changed, 9 insertions(+), 15 deletions(-)
drivers/tty/serial/qcom_geni_serial.c +9 -15
index 291649f02821..7c6e029fdb2a 100644
@@ -1352,6 +1352,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	int irq;
 	bool console = false;
 	struct uart_driver *drv;
+	struct opp_table *opp_table;
 
 	if (of_device_is_compatible(pdev->dev.of_node, "qcom,geni-debug-uart"))
 		console = true;
@@ -1433,14 +1434,14 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	if (of_property_read_bool(pdev->dev.of_node, "cts-rts-swap"))
 		port->cts_rts_swap = true;
 
-	port->se.opp_table = dev_pm_opp_set_clkname(&pdev->dev, "se");
-	if (IS_ERR(port->se.opp_table))
-		return PTR_ERR(port->se.opp_table);
+	opp_table = devm_pm_opp_set_clkname(&pdev->dev, "se");
+	if (IS_ERR(opp_table))
+		return PTR_ERR(opp_table);
 	/* OPP table is optional */
-	ret = dev_pm_opp_of_add_table(&pdev->dev);
+	ret = devm_pm_opp_of_add_table(&pdev->dev);
 	if (ret && ret != -ENODEV) {
 		dev_err(&pdev->dev, "invalid OPP table in device tree\n");
-		goto put_clkname;
+		return ret;
 	}
 
 	port->private_data.drv = drv;
@@ -1450,7 +1451,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 
 	ret = uart_add_one_port(drv, uport);
 	if (ret)
-		goto err;
+		return ret;
 
 	irq_set_status_flags(uport->irq, IRQ_NOAUTOEN);
 	ret = devm_request_irq(uport->dev, uport->irq, qcom_geni_serial_isr,
@@ -1458,7 +1459,7 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(uport->dev, "Failed to get IRQ ret %d\n", ret);
 		uart_remove_one_port(drv, uport);
-		goto err;
+		return ret;
 	}
 
 	/*
@@ -1475,16 +1476,11 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 		if (ret) {
 			device_init_wakeup(&pdev->dev, false);
 			uart_remove_one_port(drv, uport);
-			goto err;
+			return ret;
 		}
 	}
 
 	return 0;
-err:
-	dev_pm_opp_of_remove_table(&pdev->dev);
-put_clkname:
-	dev_pm_opp_put_clkname(port->se.opp_table);
-	return ret;
 }
 
 static int qcom_geni_serial_remove(struct platform_device *pdev)
@@ -1492,8 +1488,6 @@ static int qcom_geni_serial_remove(struct platform_device *pdev)
 	struct qcom_geni_serial_port *port = platform_get_drvdata(pdev);
 	struct uart_driver *drv = port->private_data.drv;
 
-	dev_pm_opp_of_remove_table(&pdev->dev);
-	dev_pm_opp_put_clkname(port->se.opp_table);
 	dev_pm_clear_wake_irq(&pdev->dev);
 	device_init_wakeup(&pdev->dev, false);
 	uart_remove_one_port(drv, &port->uport);
Signature · 6 lines
2.29.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#12 lore raw

PATCH v2 7/14 spi: spi-geni-qcom: Convert to use resource-managed OPP API

In reply to Dmitry Osipenko

From: Yangtao Li <[email protected]>

Use resource-managed OPP API to simplify code.

---
 drivers/spi/spi-geni-qcom.c  | 17 +++++++----------
 include/linux/qcom-geni-se.h |  2 --
 2 files changed, 7 insertions(+), 12 deletions(-)
drivers/spi/spi-geni-qcom.c +7 -10
index 881f645661cc..20cc29ea198b 100644
@@ -666,6 +666,7 @@ static int spi_geni_probe(struct platform_device *pdev)
 	void __iomem *base;
 	struct clk *clk;
 	struct device *dev = &pdev->dev;
+	struct opp_table *opp_table;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
@@ -691,14 +692,15 @@ static int spi_geni_probe(struct platform_device *pdev)
 	mas->se.wrapper = dev_get_drvdata(dev->parent);
 	mas->se.base = base;
 	mas->se.clk = clk;
-	mas->se.opp_table = dev_pm_opp_set_clkname(&pdev->dev, "se");
-	if (IS_ERR(mas->se.opp_table))
-		return PTR_ERR(mas->se.opp_table);
+
+	opp_table = devm_pm_opp_set_clkname(&pdev->dev, "se");
+	if (IS_ERR(opp_table))
+		return PTR_ERR(opp_table);
 	/* OPP table is optional */
-	ret = dev_pm_opp_of_add_table(&pdev->dev);
+	ret = devm_pm_opp_of_add_table(&pdev->dev);
 	if (ret && ret != -ENODEV) {
 		dev_err(&pdev->dev, "invalid OPP table in device tree\n");
-		goto put_clkname;
+		return ret;
 	}
 
 	spi->bus_num = -1;
@@ -750,9 +752,6 @@ static int spi_geni_probe(struct platform_device *pdev)
 	free_irq(mas->irq, spi);
 spi_geni_probe_runtime_disable:
 	pm_runtime_disable(dev);
-	dev_pm_opp_of_remove_table(&pdev->dev);
-put_clkname:
-	dev_pm_opp_put_clkname(mas->se.opp_table);
 	return ret;
 }
 
@@ -766,8 +765,6 @@ static int spi_geni_remove(struct platform_device *pdev)
 
 	free_irq(mas->irq, spi);
 	pm_runtime_disable(&pdev->dev);
-	dev_pm_opp_of_remove_table(&pdev->dev);
-	dev_pm_opp_put_clkname(mas->se.opp_table);
 	return 0;
 }
 
include/linux/qcom-geni-se.h +0 -2
index ec2ad4b0fe14..cddef864a760 100644
@@ -47,7 +47,6 @@ struct geni_icc_path {
  * @num_clk_levels:	Number of valid clock levels in clk_perf_tbl
  * @clk_perf_tbl:	Table of clock frequency input to serial engine clock
  * @icc_paths:		Array of ICC paths for SE
- * @opp_table:		Pointer to the OPP table
  */
 struct geni_se {
 	void __iomem *base;
@@ -57,7 +56,6 @@ struct geni_se {
 	unsigned int num_clk_levels;
 	unsigned long *clk_perf_tbl;
 	struct geni_icc_path icc_paths[3];
-	struct opp_table *opp_table;
 };
 
 /* Common SE registers */
Signature · 6 lines
2.29.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#14 lore raw

Re: [PATCH v2 07/14] spi: spi-geni-qcom: Convert to use resource-managed OPP API

11.03.2021 22:44, Mark Brown пишет:

Quoted 6 lines · Dmitry Osipenko
Quoted 2 lines

Typo there.

Good catch! Although, that should be a patchwork fault since it auto-added acks when I downloaded v1 patches and I haven't changed them. I'll fix it in v3 or, if there won't be anything else to improve, then maybe Viresh could fix it up while applying patches.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#15 lore raw

PATCH v2 8/14 spi: spi-qcom-qspi: Convert to use resource-managed OPP API

In reply to Dmitry Osipenko

From: Yangtao Li <[email protected]>

Use resource-managed OPP API to simplify code.

---
 drivers/spi/spi-qcom-qspi.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)
drivers/spi/spi-qcom-qspi.c +6 -13
index 1dbcc410cd35..f14801dd5120 100644
@@ -142,7 +142,6 @@ struct qcom_qspi {
 	struct clk_bulk_data *clks;
 	struct qspi_xfer xfer;
 	struct icc_path *icc_path_cpu_to_qspi;
-	struct opp_table *opp_table;
 	unsigned long last_speed;
 	/* Lock to protect data accessed by IRQs */
 	spinlock_t lock;
@@ -459,6 +458,7 @@ static int qcom_qspi_probe(struct platform_device *pdev)
 	struct device *dev;
 	struct spi_master *master;
 	struct qcom_qspi *ctrl;
+	struct opp_table *opp_table;
 
 	dev = &pdev->dev;
 
@@ -530,14 +530,14 @@ static int qcom_qspi_probe(struct platform_device *pdev)
 	master->handle_err = qcom_qspi_handle_err;
 	master->auto_runtime_pm = true;
 
-	ctrl->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "core");
-	if (IS_ERR(ctrl->opp_table))
-		return PTR_ERR(ctrl->opp_table);
+	opp_table = devm_pm_opp_set_clkname(&pdev->dev, "core");
+	if (IS_ERR(opp_table))
+		return PTR_ERR(opp_table);
 	/* OPP table is optional */
-	ret = dev_pm_opp_of_add_table(&pdev->dev);
+	ret = devm_pm_opp_of_add_table(&pdev->dev);
 	if (ret && ret != -ENODEV) {
 		dev_err(&pdev->dev, "invalid OPP table in device tree\n");
-		goto exit_probe_put_clkname;
+		return ret;
 	}
 
 	pm_runtime_use_autosuspend(dev);
@@ -549,10 +549,6 @@ static int qcom_qspi_probe(struct platform_device *pdev)
 		return 0;
 
 	pm_runtime_disable(dev);
-	dev_pm_opp_of_remove_table(&pdev->dev);
-
-exit_probe_put_clkname:
-	dev_pm_opp_put_clkname(ctrl->opp_table);
 
 	return ret;
 }
@@ -560,14 +556,11 @@ static int qcom_qspi_probe(struct platform_device *pdev)
 static int qcom_qspi_remove(struct platform_device *pdev)
 {
 	struct spi_master *master = platform_get_drvdata(pdev);
-	struct qcom_qspi *ctrl = spi_master_get_devdata(master);
 
 	/* Unregister _before_ disabling pm_runtime() so we stop transfers */
 	spi_unregister_master(master);
 
 	pm_runtime_disable(&pdev->dev);
-	dev_pm_opp_of_remove_table(&pdev->dev);
-	dev_pm_opp_put_clkname(ctrl->opp_table);
 
 	return 0;
 }
Signature · 6 lines
2.29.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#16 lore raw

PATCH v2 9/14 mmc: sdhci-msm: Convert to use resource-managed OPP API

In reply to Dmitry Osipenko

From: Yangtao Li <[email protected]>

Use resource-managed OPP API to simplify code.

---
 drivers/mmc/host/sdhci-msm.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)
drivers/mmc/host/sdhci-msm.c +7 -13
index 5e1da4df096f..af3f7bd764e8 100644
@@ -264,7 +264,6 @@ struct sdhci_msm_host {
 	struct clk_bulk_data bulk_clks[5];
 	unsigned long clk_rate;
 	struct mmc_host *mmc;
-	struct opp_table *opp_table;
 	bool use_14lpp_dll_reset;
 	bool tuning_done;
 	bool calibration_done;
@@ -2483,6 +2482,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 	const struct sdhci_msm_offset *msm_offset;
 	const struct sdhci_msm_variant_info *var_info;
 	struct device_node *node = pdev->dev.of_node;
+	struct opp_table *opp_table;
 
 	host = sdhci_pltfm_init(pdev, &sdhci_msm_pdata, sizeof(*msm_host));
 	if (IS_ERR(host))
@@ -2551,17 +2551,17 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 	if (ret)
 		goto bus_clk_disable;
 
-	msm_host->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "core");
-	if (IS_ERR(msm_host->opp_table)) {
-		ret = PTR_ERR(msm_host->opp_table);
+	opp_table = devm_pm_opp_set_clkname(&pdev->dev, "core");
+	if (IS_ERR(opp_table)) {
+		ret = PTR_ERR(opp_table);
 		goto bus_clk_disable;
 	}
 
 	/* OPP table is optional */
-	ret = dev_pm_opp_of_add_table(&pdev->dev);
+	ret = devm_pm_opp_of_add_table(&pdev->dev);
 	if (ret && ret != -ENODEV) {
 		dev_err(&pdev->dev, "Invalid OPP table in Device tree\n");
-		goto opp_put_clkname;
+		goto bus_clk_disable;
 	}
 
 	/* Vote for maximum clock rate for maximum performance */
@@ -2587,7 +2587,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 	ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks),
 				      msm_host->bulk_clks);
 	if (ret)
-		goto opp_cleanup;
+		goto bus_clk_disable;
 
 	/*
 	 * xo clock is needed for FLL feature of cm_dll.
@@ -2732,10 +2732,6 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 clk_disable:
 	clk_bulk_disable_unprepare(ARRAY_SIZE(msm_host->bulk_clks),
 				   msm_host->bulk_clks);
-opp_cleanup:
-	dev_pm_opp_of_remove_table(&pdev->dev);
-opp_put_clkname:
-	dev_pm_opp_put_clkname(msm_host->opp_table);
 bus_clk_disable:
 	if (!IS_ERR(msm_host->bus_clk))
 		clk_disable_unprepare(msm_host->bus_clk);
@@ -2754,8 +2750,6 @@ static int sdhci_msm_remove(struct platform_device *pdev)
 
 	sdhci_remove_host(host, dead);
 
-	dev_pm_opp_of_remove_table(&pdev->dev);
-	dev_pm_opp_put_clkname(msm_host->opp_table);
 	pm_runtime_get_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
Signature · 6 lines
2.29.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#17 lore raw

PATCH v2 10/14 drm/msm: Convert to use resource-managed OPP API

In reply to Dmitry Osipenko

From: Yangtao Li <[email protected]>

Use resource-managed OPP API to simplify code.

---
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c   |  2 +-
 drivers/gpu/drm/msm/adreno/a6xx_gmu.c   |  2 +-
 drivers/gpu/drm/msm/adreno/adreno_gpu.c |  2 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 24 +++++++------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h |  2 --
 drivers/gpu/drm/msm/dp/dp_ctrl.c        | 31 ++++++-------------------
 drivers/gpu/drm/msm/dp/dp_ctrl.h        |  1 -
 drivers/gpu/drm/msm/dp/dp_display.c     |  5 +---
 drivers/gpu/drm/msm/dsi/dsi_host.c      | 14 ++++-------
 9 files changed, 25 insertions(+), 58 deletions(-)
drivers/gpu/drm/msm/adreno/a5xx_gpu.c +1 -1
index 7e553d3efeb2..caf747ba8d5b 100644
@@ -1705,7 +1705,7 @@ static void check_speed_bin(struct device *dev)
 		nvmem_cell_put(cell);
 	}
 
-	dev_pm_opp_set_supported_hw(dev, &val, 1);
+	devm_pm_opp_set_supported_hw(dev, &val, 1);
 }
 
 struct msm_gpu *a5xx_gpu_init(struct drm_device *dev)
drivers/gpu/drm/msm/adreno/a6xx_gmu.c +1 -1
index 91cf46f84025..232940b41720 100644
@@ -1340,7 +1340,7 @@ static int a6xx_gmu_pwrlevels_probe(struct a6xx_gmu *gmu)
 	 * The GMU handles its own frequency switching so build a list of
 	 * available frequencies to send during initialization
 	 */
-	ret = dev_pm_opp_of_add_table(gmu->dev);
+	ret = devm_pm_opp_of_add_table(gmu->dev);
 	if (ret) {
 		DRM_DEV_ERROR(gmu->dev, "Unable to set the OPP table for the GMU\n");
 		return ret;
drivers/gpu/drm/msm/adreno/adreno_gpu.c +1 -1
index 0f184c3dd9d9..dfd3cac50f7f 100644
@@ -841,7 +841,7 @@ static void adreno_get_pwrlevels(struct device *dev,
 	if (!of_find_property(dev->of_node, "operating-points-v2", NULL))
 		ret = adreno_get_legacy_pwrlevels(dev);
 	else {
-		ret = dev_pm_opp_of_add_table(dev);
+		ret = devm_pm_opp_of_add_table(dev);
 		if (ret)
 			DRM_DEV_ERROR(dev, "Unable to set the OPP table\n");
 	}
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +9 -15
index 5a8e3e1fc48c..8344a3314133 100644
@@ -1082,27 +1082,28 @@ static int dpu_bind(struct device *dev, struct device *master, void *data)
 	struct msm_drm_private *priv = ddev->dev_private;
 	struct dpu_kms *dpu_kms;
 	struct dss_module_power *mp;
+	struct opp_table *opp_table;
 	int ret = 0;
 
 	dpu_kms = devm_kzalloc(&pdev->dev, sizeof(*dpu_kms), GFP_KERNEL);
 	if (!dpu_kms)
 		return -ENOMEM;
 
-	dpu_kms->opp_table = dev_pm_opp_set_clkname(dev, "core");
-	if (IS_ERR(dpu_kms->opp_table))
-		return PTR_ERR(dpu_kms->opp_table);
+	opp_table = devm_pm_opp_set_clkname(dev, "core");
+	if (IS_ERR(opp_table))
+		return PTR_ERR(opp_table);
 	/* OPP table is optional */
-	ret = dev_pm_opp_of_add_table(dev);
+	ret = devm_pm_opp_of_add_table(dev);
 	if (ret && ret != -ENODEV) {
 		dev_err(dev, "invalid OPP table in device tree\n");
-		goto put_clkname;
+		return ret;
 	}
 
 	mp = &dpu_kms->mp;
 	ret = msm_dss_parse_clock(pdev, mp);
 	if (ret) {
 		DPU_ERROR("failed to parse clocks, ret=%d\n", ret);
-		goto err;
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, dpu_kms);
@@ -1110,7 +1111,7 @@ static int dpu_bind(struct device *dev, struct device *master, void *data)
 	ret = msm_kms_init(&dpu_kms->base, &kms_funcs);
 	if (ret) {
 		DPU_ERROR("failed to init kms, ret=%d\n", ret);
-		goto err;
+		return ret;
 	}
 	dpu_kms->dev = ddev;
 	dpu_kms->pdev = pdev;
@@ -1119,11 +1120,7 @@ static int dpu_bind(struct device *dev, struct device *master, void *data)
 	dpu_kms->rpm_enabled = true;
 
 	priv->kms = &dpu_kms->base;
-	return ret;
-err:
-	dev_pm_opp_of_remove_table(dev);
-put_clkname:
-	dev_pm_opp_put_clkname(dpu_kms->opp_table);
+
 	return ret;
 }
 
@@ -1139,9 +1136,6 @@ static void dpu_unbind(struct device *dev, struct device *master, void *data)
 
 	if (dpu_kms->rpm_enabled)
 		pm_runtime_disable(&pdev->dev);
-
-	dev_pm_opp_of_remove_table(dev);
-	dev_pm_opp_put_clkname(dpu_kms->opp_table);
 }
 
 static const struct component_ops dpu_ops = {
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h +0 -2
index d6717d6672f7..1483995a94d9 100644
@@ -130,8 +130,6 @@ struct dpu_kms {
 	struct platform_device *pdev;
 	bool rpm_enabled;
 
-	struct opp_table *opp_table;
-
 	struct dss_module_power mp;
 
 	/* reference count bandwidth requests, so we know when we can
drivers/gpu/drm/msm/dp/dp_ctrl.c +7 -24
index 1390f3547fde..b186bd8d43ab 100644
@@ -77,8 +77,6 @@ struct dp_ctrl_private {
 	struct dp_parser *parser;
 	struct dp_catalog *catalog;
 
-	struct opp_table *opp_table;
-
 	struct completion idle_comp;
 	struct completion video_comp;
 };
@@ -1872,6 +1870,7 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
 			struct dp_parser *parser)
 {
 	struct dp_ctrl_private *ctrl;
+	struct opp_table *opp_table;
 	int ret;
 
 	if (!dev || !panel || !aux ||
@@ -1886,20 +1885,17 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
 		return ERR_PTR(-ENOMEM);
 	}
 
-	ctrl->opp_table = dev_pm_opp_set_clkname(dev, "ctrl_link");
-	if (IS_ERR(ctrl->opp_table)) {
+	opp_table = devm_pm_opp_set_clkname(dev, "ctrl_link");
+	if (IS_ERR(opp_table)) {
 		dev_err(dev, "invalid DP OPP table in device tree\n");
-		/* caller do PTR_ERR(ctrl->opp_table) */
-		return (struct dp_ctrl *)ctrl->opp_table;
+		/* caller do PTR_ERR(opp_table) */
+		return (struct dp_ctrl *)opp_table;
 	}
 
 	/* OPP table is optional */
-	ret = dev_pm_opp_of_add_table(dev);
-	if (ret) {
+	ret = devm_pm_opp_of_add_table(dev);
+	if (ret)
 		dev_err(dev, "failed to add DP OPP table\n");
-		dev_pm_opp_put_clkname(ctrl->opp_table);
-		ctrl->opp_table = NULL;
-	}
 
 	init_completion(&ctrl->idle_comp);
 	init_completion(&ctrl->video_comp);
@@ -1915,16 +1911,3 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
 
 	return &ctrl->dp_ctrl;
 }
-
-void dp_ctrl_put(struct dp_ctrl *dp_ctrl)
-{
-	struct dp_ctrl_private *ctrl;
-
-	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
-
-	if (ctrl->opp_table) {
-		dev_pm_opp_of_remove_table(ctrl->dev);
-		dev_pm_opp_put_clkname(ctrl->opp_table);
-		ctrl->opp_table = NULL;
-	}
-}
drivers/gpu/drm/msm/dp/dp_ctrl.h +0 -1
index a836bd358447..a6f6fa2c2aef 100644
@@ -31,6 +31,5 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
 			struct dp_panel *panel,	struct drm_dp_aux *aux,
 			struct dp_power *power, struct dp_catalog *catalog,
 			struct dp_parser *parser);
-void dp_ctrl_put(struct dp_ctrl *dp_ctrl);
 
 #endif /* _DP_CTRL_H_ */
drivers/gpu/drm/msm/dp/dp_display.c +1 -4
index 5a39da6e1eaf..6dde09c0c52e 100644
@@ -720,7 +720,6 @@ static int dp_irq_hpd_handle(struct dp_display_private *dp, u32 data)
 static void dp_display_deinit_sub_modules(struct dp_display_private *dp)
 {
 	dp_debug_put(dp->debug);
-	dp_ctrl_put(dp->ctrl);
 	dp_panel_put(dp->panel);
 	dp_aux_put(dp->aux);
 	dp_audio_put(dp->audio);
@@ -814,13 +813,11 @@ static int dp_init_sub_modules(struct dp_display_private *dp)
 		rc = PTR_ERR(dp->audio);
 		pr_err("failed to initialize audio, rc = %d\n", rc);
 		dp->audio = NULL;
-		goto error_audio;
+		goto error_ctrl;
 	}
 
 	return rc;
 
-error_audio:
-	dp_ctrl_put(dp->ctrl);
 error_ctrl:
 	dp_panel_put(dp->panel);
 error_link:
drivers/gpu/drm/msm/dsi/dsi_host.c +5 -9
index ab281cba0f08..6bfc4baddde3 100644
@@ -113,8 +113,6 @@ struct msm_dsi_host {
 	struct clk *pixel_clk_src;
 	struct clk *byte_intf_clk;
 
-	struct opp_table *opp_table;
-
 	u32 byte_clk_rate;
 	u32 pixel_clk_rate;
 	u32 esc_clk_rate;
@@ -1822,6 +1820,7 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 {
 	struct msm_dsi_host *msm_host = NULL;
 	struct platform_device *pdev = msm_dsi->pdev;
+	struct opp_table *opp_table;
 	int ret;
 
 	msm_host = devm_kzalloc(&pdev->dev, sizeof(*msm_host), GFP_KERNEL);
@@ -1886,14 +1885,13 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 		goto fail;
 	}
 
-	msm_host->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "byte");
-	if (IS_ERR(msm_host->opp_table))
-		return PTR_ERR(msm_host->opp_table);
+	opp_table = devm_pm_opp_set_clkname(&pdev->dev, "byte");
+	if (IS_ERR(opp_table))
+		return PTR_ERR(opp_table);
 	/* OPP table is optional */
-	ret = dev_pm_opp_of_add_table(&pdev->dev);
+	ret = devm_pm_opp_of_add_table(&pdev->dev);
 	if (ret && ret != -ENODEV) {
 		dev_err(&pdev->dev, "invalid OPP table in device tree\n");
-		dev_pm_opp_put_clkname(msm_host->opp_table);
 		return ret;
 	}
 
@@ -1932,8 +1930,6 @@ void msm_dsi_host_destroy(struct mipi_dsi_host *host)
 	mutex_destroy(&msm_host->cmd_mutex);
 	mutex_destroy(&msm_host->dev_mutex);
 
-	dev_pm_opp_of_remove_table(&msm_host->pdev->dev);
-	dev_pm_opp_put_clkname(msm_host->opp_table);
 	pm_runtime_disable(&msm_host->pdev->dev);
 }
 
Signature · 6 lines
2.29.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#18 lore raw

PATCH v2 11/14 drm/lima: Convert to use resource-managed OPP API

In reply to Dmitry Osipenko

From: Yangtao Li <[email protected]>

Use resource-managed OPP API to simplify code.

---
 drivers/gpu/drm/lima/lima_devfreq.c | 43 ++++++++---------------------
 drivers/gpu/drm/lima/lima_devfreq.h |  2 --
 2 files changed, 11 insertions(+), 34 deletions(-)
drivers/gpu/drm/lima/lima_devfreq.c +11 -32
index 5686ad4aaf7c..e3ccaf269892 100644
@@ -99,13 +99,6 @@ void lima_devfreq_fini(struct lima_device *ldev)
 		devm_devfreq_remove_device(ldev->dev, devfreq->devfreq);
 		devfreq->devfreq = NULL;
 	}
-
-	dev_pm_opp_of_remove_table(ldev->dev);
-
-	dev_pm_opp_put_regulators(devfreq->regulators_opp_table);
-	dev_pm_opp_put_clkname(devfreq->clkname_opp_table);
-	devfreq->regulators_opp_table = NULL;
-	devfreq->clkname_opp_table = NULL;
 }
 
 int lima_devfreq_init(struct lima_device *ldev)
@@ -125,40 +118,31 @@ int lima_devfreq_init(struct lima_device *ldev)
 
 	spin_lock_init(&ldevfreq->lock);
 
-	opp_table = dev_pm_opp_set_clkname(dev, "core");
-	if (IS_ERR(opp_table)) {
-		ret = PTR_ERR(opp_table);
-		goto err_fini;
-	}
-
-	ldevfreq->clkname_opp_table = opp_table;
+	opp_table = devm_pm_opp_set_clkname(dev, "core");
+	if (IS_ERR(opp_table))
+		return PTR_ERR(opp_table);
 
-	opp_table = dev_pm_opp_set_regulators(dev,
-					      (const char *[]){ "mali" },
-					      1);
+	opp_table = devm_pm_opp_set_regulators(dev, (const char *[]){ "mali" },
+					       1);
 	if (IS_ERR(opp_table)) {
 		ret = PTR_ERR(opp_table);
 
 		/* Continue if the optional regulator is missing */
 		if (ret != -ENODEV)
-			goto err_fini;
-	} else {
-		ldevfreq->regulators_opp_table = opp_table;
+			return ret;
 	}
 
-	ret = dev_pm_opp_of_add_table(dev);
+	ret = devm_pm_opp_of_add_table(dev);
 	if (ret)
-		goto err_fini;
+		return ret;
 
 	lima_devfreq_reset(ldevfreq);
 
 	cur_freq = clk_get_rate(ldev->clk_gpu);
 
 	opp = devfreq_recommended_opp(dev, &cur_freq, 0);
-	if (IS_ERR(opp)) {
-		ret = PTR_ERR(opp);
-		goto err_fini;
-	}
+	if (IS_ERR(opp))
+		return PTR_ERR(opp);
 
 	lima_devfreq_profile.initial_freq = cur_freq;
 	dev_pm_opp_put(opp);
@@ -167,8 +151,7 @@ int lima_devfreq_init(struct lima_device *ldev)
 					  DEVFREQ_GOV_SIMPLE_ONDEMAND, NULL);
 	if (IS_ERR(devfreq)) {
 		dev_err(dev, "Couldn't initialize GPU devfreq\n");
-		ret = PTR_ERR(devfreq);
-		goto err_fini;
+		return PTR_ERR(devfreq);
 	}
 
 	ldevfreq->devfreq = devfreq;
@@ -180,10 +163,6 @@ int lima_devfreq_init(struct lima_device *ldev)
 		ldevfreq->cooling = cooling;
 
 	return 0;
-
-err_fini:
-	lima_devfreq_fini(ldev);
-	return ret;
 }
 
 void lima_devfreq_record_busy(struct lima_devfreq *devfreq)
drivers/gpu/drm/lima/lima_devfreq.h +0 -2
index 2d9b3008ce77..c3bcae76ca07 100644
@@ -15,8 +15,6 @@ struct lima_device;
 
 struct lima_devfreq {
 	struct devfreq *devfreq;
-	struct opp_table *clkname_opp_table;
-	struct opp_table *regulators_opp_table;
 	struct thermal_cooling_device *cooling;
 
 	ktime_t busy_time;
Signature · 6 lines
2.29.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#19 lore raw

PATCH v2 12/14 drm/panfrost: Convert to use resource-managed OPP API

In reply to Dmitry Osipenko

From: Yangtao Li <[email protected]>

Use resource-managed OPP API to simplify code.

---
 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 33 +++++----------------
 drivers/gpu/drm/panfrost/panfrost_devfreq.h |  1 -
 2 files changed, 8 insertions(+), 26 deletions(-)
drivers/gpu/drm/panfrost/panfrost_devfreq.c +8 -25
index 56b3f5935703..eeb50c55c472 100644
@@ -93,25 +93,23 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	struct thermal_cooling_device *cooling;
 	struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq;
 
-	opp_table = dev_pm_opp_set_regulators(dev, pfdev->comp->supply_names,
-					      pfdev->comp->num_supplies);
+	opp_table = devm_pm_opp_set_regulators(dev, pfdev->comp->supply_names,
+					       pfdev->comp->num_supplies);
 	if (IS_ERR(opp_table)) {
 		ret = PTR_ERR(opp_table);
 		/* Continue if the optional regulator is missing */
 		if (ret != -ENODEV) {
 			DRM_DEV_ERROR(dev, "Couldn't set OPP regulators\n");
-			goto err_fini;
+			return ret;
 		}
-	} else {
-		pfdevfreq->regulators_opp_table = opp_table;
 	}
 
-	ret = dev_pm_opp_of_add_table(dev);
+	ret = devm_pm_opp_of_add_table(dev);
 	if (ret) {
 		/* Optional, continue without devfreq */
 		if (ret == -ENODEV)
 			ret = 0;
-		goto err_fini;
+		return ret;
 	}
 	pfdevfreq->opp_of_table_added = true;
 
@@ -122,10 +120,8 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	cur_freq = clk_get_rate(pfdev->clock);
 
 	opp = devfreq_recommended_opp(dev, &cur_freq, 0);
-	if (IS_ERR(opp)) {
-		ret = PTR_ERR(opp);
-		goto err_fini;
-	}
+	if (IS_ERR(opp))
+		return PTR_ERR(opp);
 
 	panfrost_devfreq_profile.initial_freq = cur_freq;
 	dev_pm_opp_put(opp);
@@ -134,8 +130,7 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 					  DEVFREQ_GOV_SIMPLE_ONDEMAND, NULL);
 	if (IS_ERR(devfreq)) {
 		DRM_DEV_ERROR(dev, "Couldn't initialize GPU devfreq\n");
-		ret = PTR_ERR(devfreq);
-		goto err_fini;
+		return PTR_ERR(devfreq);
 	}
 	pfdevfreq->devfreq = devfreq;
 
@@ -146,10 +141,6 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 		pfdevfreq->cooling = cooling;
 
 	return 0;
-
-err_fini:
-	panfrost_devfreq_fini(pfdev);
-	return ret;
 }
 
 void panfrost_devfreq_fini(struct panfrost_device *pfdev)
@@ -160,14 +151,6 @@ void panfrost_devfreq_fini(struct panfrost_device *pfdev)
 		devfreq_cooling_unregister(pfdevfreq->cooling);
 		pfdevfreq->cooling = NULL;
 	}
-
-	if (pfdevfreq->opp_of_table_added) {
-		dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
-		pfdevfreq->opp_of_table_added = false;
-	}
-
-	dev_pm_opp_put_regulators(pfdevfreq->regulators_opp_table);
-	pfdevfreq->regulators_opp_table = NULL;
 }
 
 void panfrost_devfreq_resume(struct panfrost_device *pfdev)
drivers/gpu/drm/panfrost/panfrost_devfreq.h +0 -1
index db6ea48e21f9..a51854cc8c06 100644
@@ -15,7 +15,6 @@ struct panfrost_device;
 
 struct panfrost_devfreq {
 	struct devfreq *devfreq;
-	struct opp_table *regulators_opp_table;
 	struct thermal_cooling_device *cooling;
 	bool opp_of_table_added;
 
Signature · 6 lines
2.29.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#20 lore raw

PATCH v2 13/14 media: venus: Convert to use resource-managed OPP API

In reply to Dmitry Osipenko

From: Yangtao Li <[email protected]>

Use resource-managed OPP API to simplify code.

---
 drivers/media/platform/qcom/venus/pm_helpers.c | 18 +++---------------
 1 file changed, 3 insertions(+), 15 deletions(-)
drivers/media/platform/qcom/venus/pm_helpers.c +3 -15
index 43c4e3d9e281..14fa27f26a7d 100644
@@ -860,45 +860,33 @@ static int core_get_v4(struct device *dev)
 	if (legacy_binding)
 		return 0;
 
-	core->opp_table = dev_pm_opp_set_clkname(dev, "core");
+	core->opp_table = devm_pm_opp_set_clkname(dev, "core");
 	if (IS_ERR(core->opp_table))
 		return PTR_ERR(core->opp_table);
 
 	if (core->res->opp_pmdomain) {
-		ret = dev_pm_opp_of_add_table(dev);
+		ret = devm_pm_opp_of_add_table(dev);
 		if (!ret) {
 			core->has_opp_table = true;
 		} else if (ret != -ENODEV) {
 			dev_err(dev, "invalid OPP table in device tree\n");
-			dev_pm_opp_put_clkname(core->opp_table);
 			return ret;
 		}
 	}
 
 	ret = vcodec_domains_get(dev);
-	if (ret) {
-		if (core->has_opp_table)
-			dev_pm_opp_of_remove_table(dev);
-		dev_pm_opp_put_clkname(core->opp_table);
+	if (ret)
 		return ret;
-	}
 
 	return 0;
 }
 
 static void core_put_v4(struct device *dev)
 {
-	struct venus_core *core = dev_get_drvdata(dev);
-
 	if (legacy_binding)
 		return;
 
 	vcodec_domains_put(dev);
-
-	if (core->has_opp_table)
-		dev_pm_opp_of_remove_table(dev);
-	dev_pm_opp_put_clkname(core->opp_table);
-
 }
 
 static int core_power_v4(struct device *dev, int on)
Signature · 6 lines
2.29.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#21 lore raw

PATCH v2 14/14 memory: samsung: exynos5422-dmc: Convert to use resource-managed OPP API

In reply to Dmitry Osipenko

From: Yangtao Li <[email protected]>

Use resource-managed API to simplify code.

---
 drivers/memory/samsung/exynos5422-dmc.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)
drivers/memory/samsung/exynos5422-dmc.c +3 -10
index 1dabb509dec3..56f6e65d40cd 100644
@@ -343,7 +343,7 @@ static int exynos5_init_freq_table(struct exynos5_dmc *dmc,
 	int idx;
 	unsigned long freq;
 
-	ret = dev_pm_opp_of_add_table(dmc->dev);
+	ret = devm_pm_opp_of_add_table(dmc->dev);
 	if (ret < 0) {
 		dev_err(dmc->dev, "Failed to get OPP table\n");
 		return ret;
@@ -354,7 +354,7 @@ static int exynos5_init_freq_table(struct exynos5_dmc *dmc,
 	dmc->opp = devm_kmalloc_array(dmc->dev, dmc->opp_count,
 				      sizeof(struct dmc_opp_table), GFP_KERNEL);
 	if (!dmc->opp)
-		goto err_opp;
+		return -ENOMEM;
 
 	idx = dmc->opp_count - 1;
 	for (i = 0, freq = ULONG_MAX; i < dmc->opp_count; i++, freq--) {
@@ -362,7 +362,7 @@ static int exynos5_init_freq_table(struct exynos5_dmc *dmc,
 
 		opp = dev_pm_opp_find_freq_floor(dmc->dev, &freq);
 		if (IS_ERR(opp))
-			goto err_opp;
+			return PTR_ERR(opp);
 
 		dmc->opp[idx - i].freq_hz = freq;
 		dmc->opp[idx - i].volt_uv = dev_pm_opp_get_voltage(opp);
@@ -371,11 +371,6 @@ static int exynos5_init_freq_table(struct exynos5_dmc *dmc,
 	}
 
 	return 0;
-
-err_opp:
-	dev_pm_opp_of_remove_table(dmc->dev);
-
-	return -EINVAL;
 }
 
 /**
@@ -1567,8 +1562,6 @@ static int exynos5_dmc_remove(struct platform_device *pdev)
 	clk_disable_unprepare(dmc->mout_bpll);
 	clk_disable_unprepare(dmc->fout_bpll);
 
-	dev_pm_opp_remove_table(dmc->dev);
-
 	return 0;
 }
 
Signature · 6 lines
2.29.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel