cpufreq:s5pv210:Fix typo issue
Subsystems (2)
PATCH 1/1 cpufreq:s5pv210:Fix typo issue
change 'freqency' to 'frequency' change 'accoriding' to 'according' change 'untile' to 'until' change 'souce' to 'source' change 'divier' to 'divider'
Signed-off-by Xiaofeng Cao <[email protected]>
--- drivers/cpufreq/s5pv210-cpufreq.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/cpufreq/s5pv210-cpufreq.c +5 -5
@@ -91,7 +91,7 @@ static DEFINE_MUTEX(set_freq_lock);/* Use 800MHz when entering sleep mode */ #define SLEEP_FREQ (800 * 1000) -/* Tracks if cpu freqency can be updated anymore */ +/* Tracks if cpu frequency can be updated anymore */ static bool no_cpufreq_access;/*
@@ -190,7 +190,7 @@ static u32 clkdiv_val[5][11] = {/* * This function set DRAM refresh counter -* accoriding to operating frequency of DRAM +* according to operating frequency of DRAM * ch: DMC port number 0 or 1 * freq: Operating frequency of DRAM(KHz) */
@@ -378,7 +378,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)/* * 6. Turn on APLL * 6-1. Set PMS values -* 6-2. Wait untile the PLL is locked +* 6-2. Wait until the PLL is locked */ if (index ==L0 )writel_relaxed (APLL_VAL_1000 ,S5P_APLL_CON );
@@ -390,7 +390,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) }while (!(reg & (0x1 <<29 )));/* -* 7. Change souce clock from SCLKMPLL(667Mhz) +* 7. Change source clock from SCLKMPLL(667Mhz) * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX * (667/4=166)->(200/4=50)Mhz */
@@ -439,7 +439,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) }/* -* L4 level need to change memory bus speed, hence onedram clock divier +* L4 level need to change memory bus speed, hence onedram clock divider * and memory refresh parameter should be changed */ if (bus_speed_changing) {
Signature · 1 line
2.25.1
Krzysztof Kozlowski
maintainerQuoted 11 lines · Xiaofeng Cao
change 'freqency' to 'frequency' change 'accoriding' to 'according' change 'untile' to 'until' change 'souce' to 'source' change 'divier' to 'divider'
Signed-off-by Xiaofeng Cao <[email protected]>--- drivers/cpufreq/s5pv210-cpufreq.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
Thanks, but already fixed here:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
Best regards,
Krzysztof