Skip to contentSkip to conversation

repair: Phase 6 performance improvements

PATCH In review Dave Chinner 3 participants 18 messages Mar 19, 2021 – Mar 24, 2021

lore
Share & tools
lore
#0 lore raw

cover repair: Phase 6 performance improvements

Hi folks,

This is largely a repost of my current code so that Xiang can take over and finish it off. It applies against 5.11.0 and the performance numbers are still valid. I can't remember how much of the review comments I addressed from the first time I posted it, so the changelog is poor....

Original description:

Phase 6 is single threaded, processing a single AG at a time and a single directory inode at a time. Phase 6 if often IO latency bound despite the prefetching it does, resulting in low disk utilisation and high runtimes. The solution for this is the same as phase 3 and 4 - scan multiple AGs at once for directory inodes to process. This patch set enables phase 6 to scan multiple AGS at once, and hence requires concurrent updates of inode records as tehy can be accessed and modified by multiple scanning threads now. We also need to protect the bad inodes list from concurrent access and then we can enable concurrent processing of directories.

However, directory entry checking and reconstruction can also be CPU bound - large directories overwhelm the directory name hash structures because the algorithms have poor scalability - one is O(n
+ n^2), another is O(n^2) when the number of dirents greatly outsizes the hash table sizes. Hence we need to more than just parallelise across AGs - we need to parallelise processing within AGs so that a single large directory doesn't completely serialise processing within an AG. This is done by using bound-depth workqueues to allow inode records to be processed asynchronously as the inode records are fetched from disk.

Further, we need to fix the bad alogrithmic scalability of the in memory directory tracking structures. This is done through a combination of better structures and more appropriate dynamic size choices.

The results on a filesystem with a single 10 million entry directory containing 400MB of directory entry data is as follows:

v5.6.0 (Baseline)

       XFS_REPAIR Summary    Thu Oct 22 12:10:52 2020
Phase           Start           End             Duration
Phase 1:        10/22 12:06:41  10/22 12:06:41
Phase 2:        10/22 12:06:41  10/22 12:06:41
Phase 3:        10/22 12:06:41  10/22 12:07:00  19 seconds
Phase 4:        10/22 12:07:00  10/22 12:07:12  12 seconds
Phase 5:        10/22 12:07:12  10/22 12:07:13  1 second
Phase 6:        10/22 12:07:13  10/22 12:10:51  3 minutes, 38 seconds
Phase 7:        10/22 12:10:51  10/22 12:10:51

Total run time: 4 minutes, 10 seconds

real 4m11.151s
user 4m20.083s
sys 0m14.744s

5.9.0-rc1 + patchset:

        XFS_REPAIR Summary    Thu Oct 22 13:19:02 2020
Phase           Start           End             Duration
Phase 1:        10/22 13:18:09  10/22 13:18:09
Phase 2:        10/22 13:18:09  10/22 13:18:09
Phase 3:        10/22 13:18:09  10/22 13:18:31  22 seconds
Phase 4:        10/22 13:18:31  10/22 13:18:45  14 seconds
Phase 5:        10/22 13:18:45  10/22 13:18:45
Phase 6:        10/22 13:18:45  10/22 13:19:00  15 seconds
Phase 7:        10/22 13:19:00  10/22 13:19:00

Total run time: 51 seconds

real 0m52.375s
user 1m3.739s
sys 0m20.346s

Performance improvements on filesystems with small directories and really fast storage are, at best, modest. The big improvements are seen with either really large directories and/or relatively slow devices that are IO latency bound and can benefit from having more IO in flight at once.

Cheers,

Dave.

Version 2
- use pthread_cond_broadcast() to wakeup throttled waiters in bounded workqueues.
- other changes I didn't record when I made them so I've forgotten about them.

Dave Chinner (7):
workqueue: bound maximum queue depth
repair: Protect bad inode list with mutex
repair: protect inode chunk tree records with a mutex
repair: parallelise phase 6
repair: don't duplicate names in phase 6
repair: convert the dir byaddr hash to a radix tree
repair: scale duplicate name checking in phase 6.

 libfrog/radix-tree.c |  46 +++++
 libfrog/workqueue.c  |  42 ++++-
 libfrog/workqueue.h  |   4 +
 repair/dir2.c        |  32 ++--
 repair/incore.h      |  23 +++
 repair/incore_ino.c  |  15 ++
 repair/phase6.c      | 396 +++++++++++++++++++++----------------------
 7 files changed, 338 insertions(+), 220 deletions(-)
Signature · 1 line
2.30.1
#1 lore raw

PATCH 1/7 workqueue: bound maximum queue depth

From: Dave Chinner <[email protected]>

Existing users of workqueues have bound maximum queue depths in their external algorithms (e.g. prefetch counts). For parallelising work that doesn't have an external bound, allow workqueues to throttle incoming requests at a maximum bound. Bounded workqueues also need to distribute work over all worker threads themselves as there is no external bounding or worker function throttling provided.

Existing callers are not throttled and retain direct control of worker threads, only users of the new create interface will be throttled and concurrency managed.

---
 libfrog/workqueue.c | 42 +++++++++++++++++++++++++++++++++++++++---
 libfrog/workqueue.h |  4 ++++
 2 files changed, 43 insertions(+), 3 deletions(-)
libfrog/workqueue.c +39 -3
index fe3de4289379..97f3bf76d9b9 100644
@@ -40,13 +40,21 @@ workqueue_thread(void *arg)
 		}
 
 		/*
-		 *  Dequeue work from the head of the list.
+		 *  Dequeue work from the head of the list. If the queue was
+		 *  full then send a wakeup if we're configured to do so.
 		 */
 		assert(wq->item_count > 0);
+		if (wq->max_queued && wq->item_count == wq->max_queued)
+			pthread_cond_broadcast(&wq->queue_full);
+
 		wi = wq->next_item;
 		wq->next_item = wi->next;
 		wq->item_count--;
 
+		if (wq->max_queued && wq->next_item) {
+			/* more work, wake up another worker */
+			pthread_cond_signal(&wq->wakeup);
+		}
 		pthread_mutex_unlock(&wq->lock);
 
 		(wi->function)(wi->queue, wi->index, wi->arg);
@@ -58,10 +66,11 @@ workqueue_thread(void *arg)
 
 /* Allocate a work queue and threads.  Returns zero or negative error code. */
 int
-workqueue_create(
+workqueue_create_bound(
 	struct workqueue	*wq,
 	void			*wq_ctx,
-	unsigned int		nr_workers)
+	unsigned int		nr_workers,
+	unsigned int		max_queue)
 {
 	unsigned int		i;
 	int			err = 0;
@@ -70,12 +79,16 @@ workqueue_create(
 	err = -pthread_cond_init(&wq->wakeup, NULL);
 	if (err)
 		return err;
+	err = -pthread_cond_init(&wq->queue_full, NULL);
+	if (err)
+		goto out_wake;
 	err = -pthread_mutex_init(&wq->lock, NULL);
 	if (err)
 		goto out_cond;
 
 	wq->wq_ctx = wq_ctx;
 	wq->thread_count = nr_workers;
+	wq->max_queued = max_queue;
 	wq->threads = malloc(nr_workers * sizeof(pthread_t));
 	if (!wq->threads) {
 		err = -errno;
@@ -102,10 +115,21 @@ workqueue_create(
 out_mutex:
 	pthread_mutex_destroy(&wq->lock);
 out_cond:
+	pthread_cond_destroy(&wq->queue_full);
+out_wake:
 	pthread_cond_destroy(&wq->wakeup);
 	return err;
 }
 
+int
+workqueue_create(
+	struct workqueue	*wq,
+	void			*wq_ctx,
+	unsigned int		nr_workers)
+{
+	return workqueue_create_bound(wq, wq_ctx, nr_workers, 0);
+}
+
 /*
  * Create a work item consisting of a function and some arguments and schedule
  * the work item to be run via the thread pool.  Returns zero or a negative
@@ -140,6 +164,7 @@ workqueue_add(
 
 	/* Now queue the new work structure to the work queue. */
 	pthread_mutex_lock(&wq->lock);
+restart:
 	if (wq->next_item == NULL) {
 		assert(wq->item_count == 0);
 		ret = -pthread_cond_signal(&wq->wakeup);
@@ -150,6 +175,16 @@ workqueue_add(
 		}
 		wq->next_item = wi;
 	} else {
+		/* throttle on a full queue if configured */
+		if (wq->max_queued && wq->item_count == wq->max_queued) {
+			pthread_cond_wait(&wq->queue_full, &wq->lock);
+			/*
+			 * Queue might be empty or even still full by the time
+			 * we get the lock back, so restart the lookup so we do
+			 * the right thing with the current state of the queue.
+			 */
+			goto restart;
+		}
 		wq->last_item->next = wi;
 	}
 	wq->last_item = wi;
@@ -201,5 +236,6 @@ workqueue_destroy(
 	free(wq->threads);
 	pthread_mutex_destroy(&wq->lock);
 	pthread_cond_destroy(&wq->wakeup);
+	pthread_cond_destroy(&wq->queue_full);
 	memset(wq, 0, sizeof(*wq));
 }
libfrog/workqueue.h +4 -0
index a56d1cf14081..a9c108d0e66a 100644
@@ -31,10 +31,14 @@ struct workqueue {
 	unsigned int		thread_count;
 	bool			terminate;
 	bool			terminated;
+	int			max_queued;
+	pthread_cond_t		queue_full;
 };
 
 int workqueue_create(struct workqueue *wq, void *wq_ctx,
 		unsigned int nr_workers);
+int workqueue_create_bound(struct workqueue *wq, void *wq_ctx,
+		unsigned int nr_workers, unsigned int max_queue);
 int workqueue_add(struct workqueue *wq, workqueue_func_t fn,
 		uint32_t index, void *arg);
 int workqueue_terminate(struct workqueue *wq);
Signature · 1 line
2.30.1
#3 lore raw

PATCH 2/7 repair: Protect bad inode list with mutex

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

To enable phase 6 parallelisation, we need to protect the bad inode list from concurrent modification and/or access. Wrap it with a mutex and clean up the nasty typedefs.

---
 repair/dir2.c | 32 +++++++++++++++++++++-----------
 1 file changed, 21 insertions(+), 11 deletions(-)
repair/dir2.c +21 -11
index eabdb4f2d497..23333e59a382 100644
@@ -20,40 +20,50 @@
  * Known bad inode list.  These are seen when the leaf and node
  * block linkages are incorrect.
  */
-typedef struct dir2_bad {
+struct dir2_bad {
 	xfs_ino_t	ino;
 	struct dir2_bad	*next;
-} dir2_bad_t;
+};
 
-static dir2_bad_t *dir2_bad_list;
+static struct dir2_bad	*dir2_bad_list;
+pthread_mutex_t		dir2_bad_list_lock = PTHREAD_MUTEX_INITIALIZER;
 
 static void
 dir2_add_badlist(
 	xfs_ino_t	ino)
 {
-	dir2_bad_t	*l;
+	struct dir2_bad	*l;
 
-	if ((l = malloc(sizeof(dir2_bad_t))) == NULL) {
+	l = malloc(sizeof(*l));
+	if (!l) {
 		do_error(
 _("malloc failed (%zu bytes) dir2_add_badlist:ino %" PRIu64 "\n"),
-			sizeof(dir2_bad_t), ino);
+			sizeof(*l), ino);
 		exit(1);
 	}
+	pthread_mutex_lock(&dir2_bad_list_lock);
 	l->next = dir2_bad_list;
 	dir2_bad_list = l;
 	l->ino = ino;
+	pthread_mutex_unlock(&dir2_bad_list_lock);
 }
 
 int
 dir2_is_badino(
 	xfs_ino_t	ino)
 {
-	dir2_bad_t	*l;
+	struct dir2_bad	*l;
+	int		ret = 0;
 
-	for (l = dir2_bad_list; l; l = l->next)
-		if (l->ino == ino)
-			return 1;
-	return 0;
+	pthread_mutex_lock(&dir2_bad_list_lock);
+	for (l = dir2_bad_list; l; l = l->next) {
+		if (l->ino == ino) {
+			ret = 1;
+			break;
+		}
+	}
+	pthread_mutex_unlock(&dir2_bad_list_lock);
+	return ret;
 }
 
 /*
Signature · 1 line
2.30.1
#6 lore raw

PATCH 3/7 repair: protect inode chunk tree records with a mutex

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

Phase 6 accesses inode chunk records mostly in an isolated manner. However, when it finds a corruption in a directory or there are multiple hardlinks to an inode, there can be concurrent access to the inode chunk record to update state.

Hence the inode record itself needs a mutex. This protects all state changes within the inode chunk record, as well as inode link counts and chunk references. That allows us to process multiple chunks at once, providing concurrency within an AG as well as across AGs.

The inode chunk tree itself is not modified in the directory scanning and rebuilding part of phase 6 which we are making concurrent, hence we do not need to worry about locking for AVL tree lookups to find the inode chunk records themselves. Therefore internal locking is all we need here.

---
 repair/incore.h     | 23 +++++++++++++++++++++++
 repair/incore_ino.c | 15 +++++++++++++++
 2 files changed, 38 insertions(+)
repair/incore.h +23 -0
index 977e5dd04336..d64315fd2585 100644
@@ -281,6 +281,7 @@ typedef struct ino_tree_node  {
 		parent_list_t	*plist;		/* phases 2-5 */
 	} ino_un;
 	uint8_t			*ftypes;	/* phases 3,6 */
+	pthread_mutex_t		lock;
 } ino_tree_node_t;
 
 #define INOS_PER_IREC	(sizeof(uint64_t) * NBBY)
@@ -411,7 +412,9 @@ next_free_ino_rec(ino_tree_node_t *ino_rec)
  */
 static inline void add_inode_refchecked(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_un.ex_data->ino_processed |= IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline int is_inode_refchecked(struct ino_tree_node *irec, int offset)
@@ -437,12 +440,16 @@ static inline int is_inode_confirmed(struct ino_tree_node *irec, int offset)
  */
 static inline void set_inode_isadir(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_isa_dir |= IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline void clear_inode_isadir(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_isa_dir &= ~IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline int inode_isadir(struct ino_tree_node *irec, int offset)
@@ -455,15 +462,19 @@ static inline int inode_isadir(struct ino_tree_node *irec, int offset)
  */
 static inline void set_inode_free(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	set_inode_confirmed(irec, offset);
 	irec->ir_free |= XFS_INOBT_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 
 }
 
 static inline void set_inode_used(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	set_inode_confirmed(irec, offset);
 	irec->ir_free &= ~XFS_INOBT_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline int is_inode_free(struct ino_tree_node *irec, int offset)
@@ -476,7 +487,9 @@ static inline int is_inode_free(struct ino_tree_node *irec, int offset)
  */
 static inline void set_inode_sparse(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ir_sparse |= XFS_INOBT_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline bool is_inode_sparse(struct ino_tree_node *irec, int offset)
@@ -489,12 +502,16 @@ static inline bool is_inode_sparse(struct ino_tree_node *irec, int offset)
  */
 static inline void set_inode_was_rl(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_was_rl |= IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline void clear_inode_was_rl(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_was_rl &= ~IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline int inode_was_rl(struct ino_tree_node *irec, int offset)
@@ -507,12 +524,16 @@ static inline int inode_was_rl(struct ino_tree_node *irec, int offset)
  */
 static inline void set_inode_is_rl(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_is_rl |= IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline void clear_inode_is_rl(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_is_rl &= ~IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline int inode_is_rl(struct ino_tree_node *irec, int offset)
@@ -545,7 +566,9 @@ static inline int is_inode_reached(struct ino_tree_node *irec, int offset)
 static inline void add_inode_reached(struct ino_tree_node *irec, int offset)
 {
 	add_inode_ref(irec, offset);
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_un.ex_data->ino_reached |= IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 /*
repair/incore_ino.c +15 -0
index 82956ae93005..299e4f949e5e 100644
@@ -91,6 +91,7 @@ void add_inode_ref(struct ino_tree_node *irec, int ino_offset)
 {
 	ASSERT(irec->ino_un.ex_data != NULL);
 
+	pthread_mutex_lock(&irec->lock);
 	switch (irec->nlink_size) {
 	case sizeof(uint8_t):
 		if (irec->ino_un.ex_data->counted_nlinks.un8[ino_offset] < 0xff) {
@@ -112,6 +113,7 @@ void add_inode_ref(struct ino_tree_node *irec, int ino_offset)
 	default:
 		ASSERT(0);
 	}
+	pthread_mutex_unlock(&irec->lock);
 }
 
 void drop_inode_ref(struct ino_tree_node *irec, int ino_offset)
@@ -120,6 +122,7 @@ void drop_inode_ref(struct ino_tree_node *irec, int ino_offset)
 
 	ASSERT(irec->ino_un.ex_data != NULL);
 
+	pthread_mutex_lock(&irec->lock);
 	switch (irec->nlink_size) {
 	case sizeof(uint8_t):
 		ASSERT(irec->ino_un.ex_data->counted_nlinks.un8[ino_offset] > 0);
@@ -139,6 +142,7 @@ void drop_inode_ref(struct ino_tree_node *irec, int ino_offset)
 
 	if (refs == 0)
 		irec->ino_un.ex_data->ino_reached &= ~IREC_MASK(ino_offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 uint32_t num_inode_references(struct ino_tree_node *irec, int ino_offset)
@@ -161,6 +165,7 @@ uint32_t num_inode_references(struct ino_tree_node *irec, int ino_offset)
 void set_inode_disk_nlinks(struct ino_tree_node *irec, int ino_offset,
 		uint32_t nlinks)
 {
+	pthread_mutex_lock(&irec->lock);
 	switch (irec->nlink_size) {
 	case sizeof(uint8_t):
 		if (nlinks < 0xff) {
@@ -182,6 +187,7 @@ void set_inode_disk_nlinks(struct ino_tree_node *irec, int ino_offset,
 	default:
 		ASSERT(0);
 	}
+	pthread_mutex_unlock(&irec->lock);
 }
 
 uint32_t get_inode_disk_nlinks(struct ino_tree_node *irec, int ino_offset)
@@ -253,6 +259,7 @@ alloc_ino_node(
 	irec->nlink_size = sizeof(uint8_t);
 	irec->disk_nlinks.un8 = alloc_nlink_array(irec->nlink_size);
 	irec->ftypes = alloc_ftypes_array(mp);
+	pthread_mutex_init(&irec->lock, NULL);
 	return irec;
 }
 
@@ -294,6 +301,7 @@ free_ino_tree_node(
 	}
 
 	free(irec->ftypes);
+	pthread_mutex_destroy(&irec->lock);
 	free(irec);
 }
 
@@ -600,6 +608,7 @@ set_inode_parent(
 	uint64_t		bitmask;
 	parent_entry_t		*tmp;
 
+	pthread_mutex_lock(&irec->lock);
 	if (full_ino_ex_data)
 		ptbl = irec->ino_un.ex_data->parents;
 	else
@@ -625,6 +634,7 @@ set_inode_parent(
 #endif
 		ptbl->pentries[0] = parent;
 
+		pthread_mutex_unlock(&irec->lock);
 		return;
 	}
 
@@ -642,6 +652,7 @@ set_inode_parent(
 #endif
 		ptbl->pentries[target] = parent;
 
+		pthread_mutex_unlock(&irec->lock);
 		return;
 	}
 
@@ -682,6 +693,7 @@ set_inode_parent(
 #endif
 	ptbl->pentries[target] = parent;
 	ptbl->pmask |= (1ULL << offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 xfs_ino_t
@@ -692,6 +704,7 @@ get_inode_parent(ino_tree_node_t *irec, int offset)
 	int		i;
 	int		target;
 
+	pthread_mutex_lock(&irec->lock);
 	if (full_ino_ex_data)
 		ptbl = irec->ino_un.ex_data->parents;
 	else
@@ -709,9 +722,11 @@ get_inode_parent(ino_tree_node_t *irec, int offset)
 #ifdef DEBUG
 		ASSERT(target < ptbl->cnt);
 #endif
+		pthread_mutex_unlock(&irec->lock);
 		return(ptbl->pentries[target]);
 	}
 
+	pthread_mutex_unlock(&irec->lock);
 	return(0LL);
 }
 
Signature · 1 line
2.30.1
#8 lore raw

PATCH 4/7 repair: parallelise phase 6

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

A recent metadump provided to us caused repair to take hours in phase6. It wasn't IO bound - it was fully CPU bound the entire time. The only way to speed it up is to make phase 6 run multiple concurrent processing threads.

The obvious way to do this is to spread the concurrency across AGs, like the other phases, and while this works it is not optimal. When a processing thread hits a really large directory, it essentially sits CPU bound until that directory is processed. IF an AG has lots of large directories, we end up with a really long single threaded tail that limits concurrency.

Hence we also need to have concurrency /within/ the AG. This is realtively easy, as the inode chunk records allow for a simple concurrency mechanism within an AG. We can simply feed each chunk record to a workqueue, and we get concurrency within the AG for free. However, this allows prefetch to run way ahead of processing and this blows out the buffer cache size and can cause OOM.

However, we can use the new workqueue depth limiting to limit the number of inode chunks queued, and this then backs up the inode prefetching to it's maximum queue depth. Hence we prevent having the prefetch code queue the entire AG's inode chunks on the workqueue blowing out memory by throttling the prefetch consumer.

This takes phase 6 from taking many, many hours down to:

Phase 6: 10/30 21:12:58 10/30 21:40:48 27 minutes, 50 seconds

And burning 20-30 cpus that entire time on my test rig.

---
 repair/phase6.c | 43 +++++++++++++++++++++++++++++++++++--------
 1 file changed, 35 insertions(+), 8 deletions(-)
repair/phase6.c +35 -8
index 14464befa8b6..85abea29250a 100644
@@ -6,6 +6,7 @@
 
 #include "libxfs.h"
 #include "threads.h"
+#include "threads.h"
 #include "prefetch.h"
 #include "avl.h"
 #include "globals.h"
@@ -3105,20 +3106,45 @@ check_for_orphaned_inodes(
 }
 
 static void
-traverse_function(
+do_dir_inode(
 	struct workqueue	*wq,
-	xfs_agnumber_t 		agno,
+	xfs_agnumber_t		agno,
 	void			*arg)
 {
-	ino_tree_node_t 	*irec;
+	struct ino_tree_node	*irec = arg;
 	int			i;
+
+	for (i = 0; i < XFS_INODES_PER_CHUNK; i++)  {
+		if (inode_isadir(irec, i))
+			process_dir_inode(wq->wq_ctx, agno, irec, i);
+	}
+}
+
+static void
+traverse_function(
+	struct workqueue	*wq,
+	xfs_agnumber_t		agno,
+	void			*arg)
+{
+	struct ino_tree_node	*irec;
 	prefetch_args_t		*pf_args = arg;
+	struct workqueue	lwq;
+	struct xfs_mount	*mp = wq->wq_ctx;
+
 
 	wait_for_inode_prefetch(pf_args);
 
 	if (verbose)
 		do_log(_("        - agno = %d\n"), agno);
 
+	/*
+	 * The more AGs we have in flight at once, the fewer processing threads
+	 * per AG. This means we don't overwhelm the machine with hundreds of
+	 * threads when we start acting on lots of AGs at once. We just want
+	 * enough that we can keep multiple CPUs busy across multiple AGs.
+	 */
+	workqueue_create_bound(&lwq, mp, ag_stride, 1000);
+
 	for (irec = findfirst_inode_rec(agno); irec; irec = next_ino_rec(irec)) {
 		if (irec->ino_isa_dir == 0)
 			continue;
@@ -3126,18 +3152,19 @@ traverse_function(
 		if (pf_args) {
 			sem_post(&pf_args->ra_count);
 #ifdef XR_PF_TRACE
+			{
+			int	i;
 			sem_getvalue(&pf_args->ra_count, &i);
 			pftrace(
 		"processing inode chunk %p in AG %d (sem count = %d)",
 				irec, agno, i);
+			}
 #endif
 		}
 
-		for (i = 0; i < XFS_INODES_PER_CHUNK; i++)  {
-			if (inode_isadir(irec, i))
-				process_dir_inode(wq->wq_ctx, agno, irec, i);
-		}
+		queue_work(&lwq, do_dir_inode, agno, irec);
 	}
+	destroy_work_queue(&lwq);
 	cleanup_inode_prefetch(pf_args);
 }
 
@@ -3165,7 +3192,7 @@ static void
 traverse_ags(
 	struct xfs_mount	*mp)
 {
-	do_inode_prefetch(mp, 0, traverse_function, false, true);
+	do_inode_prefetch(mp, ag_stride, traverse_function, false, true);
 }
 
 void
Signature · 1 line
2.30.1
#9 lore raw

PATCH 5/7 repair: don't duplicate names in phase 6

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

The name hash in phase 6 is constructed by using names that point directly into the directory buffers. Hence before the buffers can be released, the constructed name hash has to duplicate all those names into meory it owns via dir_hash_dup_names().

Given that the structure that holds the name is dynamically allocated, it makes no sense to store a pointer to the name dir_hash_add() and then later have dynamically allocate the name.

Extend the name hash allocation to contain space for the name itself, and copy the name into the name hash structure in dir_hash_add(). This allows us to get rid of dir_hash_dup_names(), and the directory checking code no longer needs to hold all the directory buffers in memory until the entire directory walk is complete and the names duplicated.

---
 repair/phase6.c | 101 ++++++++++++++----------------------------------
 1 file changed, 29 insertions(+), 72 deletions(-)
repair/phase6.c +29 -72
index 85abea29250a..440b6a2982df 100644
@@ -72,7 +72,7 @@ typedef struct dir_hash_ent {
 	struct dir_hash_ent	*nextbyorder;	/* next in order added */
 	xfs_dahash_t		hashval;	/* hash value of name */
 	uint32_t		address;	/* offset of data entry */
-	xfs_ino_t 		inum;		/* inode num of entry */
+	xfs_ino_t		inum;		/* inode num of entry */
 	short			junkit;		/* name starts with / */
 	short			seen;		/* have seen leaf entry */
 	struct xfs_name		name;
@@ -80,7 +80,6 @@ typedef struct dir_hash_ent {
 
 typedef struct dir_hash_tab {
 	int			size;		/* size of hash tables */
-	int			names_duped;	/* 1 = ent names malloced */
 	dir_hash_ent_t		*first;		/* ptr to first added entry */
 	dir_hash_ent_t		*last;		/* ptr to last added entry */
 	dir_hash_ent_t		**byhash;	/* ptr to name hash buckets */
@@ -171,8 +170,6 @@ dir_hash_add(
 	short			junk;
 	struct xfs_name		xname;
 
-	ASSERT(!hashtab->names_duped);
-
 	xname.name = name;
 	xname.len = namelen;
 	xname.type = ftype;
@@ -199,7 +196,12 @@ dir_hash_add(
 		}
 	}
 
-	if ((p = malloc(sizeof(*p))) == NULL)
+	/*
+	 * Allocate enough space for the hash entry and the name in a single
+	 * allocation so we can store our own copy of the name for later use.
+	 */
+	p = calloc(1, sizeof(*p) + namelen + 1);
+	if (!p)
 		do_error(_("malloc failed in dir_hash_add (%zu bytes)\n"),
 			sizeof(*p));
 
@@ -220,7 +222,12 @@ dir_hash_add(
 	p->address = addr;
 	p->inum = inum;
 	p->seen = 0;
-	p->name = xname;
+
+	/* Set up the name in the region trailing the hash entry. */
+	memcpy(p + 1, name, namelen);
+	p->name.name = (const unsigned char *)(p + 1);
+	p->name.len = namelen;
+	p->name.type = ftype;
 
 	return !dup;
 }
@@ -287,8 +294,6 @@ dir_hash_done(
 	for (i = 0; i < hashtab->size; i++) {
 		for (p = hashtab->byaddr[i]; p; p = n) {
 			n = p->nextbyaddr;
-			if (hashtab->names_duped)
-				free((void *)p->name.name);
 			free(p);
 		}
 	}
@@ -385,27 +390,6 @@ dir_hash_see_all(
 	return j == stale ? DIR_HASH_CK_OK : DIR_HASH_CK_BADSTALE;
 }
 
-/*
- * Convert name pointers into locally allocated memory.
- * This must only be done after all the entries have been added.
- */
-static void
-dir_hash_dup_names(dir_hash_tab_t *hashtab)
-{
-	unsigned char		*name;
-	dir_hash_ent_t		*p;
-
-	if (hashtab->names_duped)
-		return;
-
-	for (p = hashtab->first; p; p = p->nextbyorder) {
-		name = malloc(p->name.len);
-		memcpy(name, p->name.name, p->name.len);
-		p->name.name = name;
-	}
-	hashtab->names_duped = 1;
-}
-
 /*
  * Given a block number in a fork, return the next valid block number (not a
  * hole).  If this is the last block number then NULLFILEOFF is returned.
@@ -1383,6 +1367,7 @@ dir2_kill_block(
 		res_failed(error);
 	libxfs_trans_ijoin(tp, ip, 0);
 	libxfs_trans_bjoin(tp, bp);
+	libxfs_trans_bhold(tp, bp);
 	memset(&args, 0, sizeof(args));
 	args.dp = ip;
 	args.trans = tp;
@@ -1414,7 +1399,7 @@ longform_dir2_entry_check_data(
 	int			*need_dot,
 	ino_tree_node_t		*current_irec,
 	int			current_ino_offset,
-	struct xfs_buf		**bpp,
+	struct xfs_buf		*bp,
 	dir_hash_tab_t		*hashtab,
 	freetab_t		**freetabp,
 	xfs_dablk_t		da_bno,
@@ -1422,7 +1407,6 @@ longform_dir2_entry_check_data(
 {
 	xfs_dir2_dataptr_t	addr;
 	xfs_dir2_leaf_entry_t	*blp;
-	struct xfs_buf		*bp;
 	xfs_dir2_block_tail_t	*btp;
 	struct xfs_dir2_data_hdr *d;
 	xfs_dir2_db_t		db;
@@ -1453,7 +1437,6 @@ longform_dir2_entry_check_data(
 	};
 
 
-	bp = *bpp;
 	d = bp->b_addr;
 	ptr = (char *)d + mp->m_dir_geo->data_entry_offset;
 	nbad = 0;
@@ -1554,10 +1537,8 @@ longform_dir2_entry_check_data(
 			dir2_kill_block(mp, ip, da_bno, bp);
 		} else {
 			do_warn(_("would junk block\n"));
-			libxfs_buf_relse(bp);
 		}
 		freetab->ents[db].v = NULLDATAOFF;
-		*bpp = NULL;
 		return;
 	}
 
@@ -2215,17 +2196,15 @@ longform_dir2_entry_check(xfs_mount_t	*mp,
 			int		ino_offset,
 			dir_hash_tab_t	*hashtab)
 {
-	struct xfs_buf		**bplist;
+	struct xfs_buf		*bp;
 	xfs_dablk_t		da_bno;
 	freetab_t		*freetab;
-	int			num_bps;
 	int			i;
 	int			isblock;
 	int			isleaf;
 	xfs_fileoff_t		next_da_bno;
 	int			seeval;
 	int			fixit = 0;
-	xfs_dir2_db_t		db;
 	struct xfs_da_args	args;
 
 	*need_dot = 1;
@@ -2242,11 +2221,6 @@ longform_dir2_entry_check(xfs_mount_t	*mp,
 		freetab->ents[i].v = NULLDATAOFF;
 		freetab->ents[i].s = 0;
 	}
-	num_bps = freetab->naents;
-	bplist = calloc(num_bps, sizeof(struct xfs_buf*));
-	if (!bplist)
-		do_error(_("calloc failed in %s (%zu bytes)\n"),
-			__func__, num_bps * sizeof(struct xfs_buf*));
 
 	/* is this a block, leaf, or node directory? */
 	args.dp = ip;
@@ -2275,28 +2249,12 @@ longform_dir2_entry_check(xfs_mount_t	*mp,
 			break;
 		}
 
-		db = xfs_dir2_da_to_db(mp->m_dir_geo, da_bno);
-		if (db >= num_bps) {
-			int last_size = num_bps;
-
-			/* more data blocks than expected */
-			num_bps = db + 1;
-			bplist = realloc(bplist, num_bps * sizeof(struct xfs_buf*));
-			if (!bplist)
-				do_error(_("realloc failed in %s (%zu bytes)\n"),
-					__func__,
-					num_bps * sizeof(struct xfs_buf*));
-			/* Initialize the new elements */
-			for (i = last_size; i < num_bps; i++)
-				bplist[i] = NULL;
-		}
-
 		if (isblock)
 			ops = &xfs_dir3_block_buf_ops;
 		else
 			ops = &xfs_dir3_data_buf_ops;
 
-		error = dir_read_buf(ip, da_bno, &bplist[db], ops, &fixit);
+		error = dir_read_buf(ip, da_bno, &bp, ops, &fixit);
 		if (error) {
 			do_warn(
 	_("can't read data block %u for directory inode %" PRIu64 " error %d\n"),
@@ -2316,21 +2274,25 @@ longform_dir2_entry_check(xfs_mount_t	*mp,
 		}
 
 		/* check v5 metadata */
-		d = bplist[db]->b_addr;
+		d = bp->b_addr;
 		if (be32_to_cpu(d->magic) == XFS_DIR3_BLOCK_MAGIC ||
 		    be32_to_cpu(d->magic) == XFS_DIR3_DATA_MAGIC) {
-			struct xfs_buf		 *bp = bplist[db];
-
 			error = check_dir3_header(mp, bp, ino);
 			if (error) {
 				fixit++;
+				if (isblock)
+					goto out_fix;
 				continue;
 			}
 		}
 
 		longform_dir2_entry_check_data(mp, ip, num_illegal, need_dot,
-				irec, ino_offset, &bplist[db], hashtab,
+				irec, ino_offset, bp, hashtab,
 				&freetab, da_bno, isblock);
+		if (isblock)
+			break;
+
+		libxfs_buf_relse(bp);
 	}
 	fixit |= (*num_illegal != 0) || dir2_is_badino(ino) || *need_dot;
 
@@ -2341,7 +2303,7 @@ longform_dir2_entry_check(xfs_mount_t	*mp,
 			xfs_dir2_block_tail_t	*btp;
 			xfs_dir2_leaf_entry_t	*blp;
 
-			block = bplist[0]->b_addr;
+			block = bp->b_addr;
 			btp = xfs_dir2_block_tail_p(mp->m_dir_geo, block);
 			blp = xfs_dir2_block_leaf_p(btp);
 			seeval = dir_hash_see_all(hashtab, blp,
@@ -2358,11 +2320,10 @@ longform_dir2_entry_check(xfs_mount_t	*mp,
 		}
 	}
 out_fix:
+	if (isblock && bp)
+		libxfs_buf_relse(bp);
+
 	if (!no_modify && (fixit || dotdot_update)) {
-		dir_hash_dup_names(hashtab);
-		for (i = 0; i < num_bps; i++)
-			if (bplist[i])
-				libxfs_buf_relse(bplist[i]);
 		longform_dir2_rebuild(mp, ino, ip, irec, ino_offset, hashtab);
 		*num_illegal = 0;
 		*need_dot = 0;
@@ -2370,12 +2331,8 @@ out_fix:
 		if (fixit || dotdot_update)
 			do_warn(
 	_("would rebuild directory inode %" PRIu64 "\n"), ino);
-		for (i = 0; i < num_bps; i++)
-			if (bplist[i])
-				libxfs_buf_relse(bplist[i]);
 	}
 
-	free(bplist);
 	free(freetab);
 }
 
Signature · 1 line
2.30.1
#10 lore raw

PATCH 6/7 repair: convert the dir byaddr hash to a radix tree

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

Phase 6 uses a hash table to track the data segment addresses of the entries it has seen in a directory. This is indexed by the offset into the data segment for the dirent, and is used to check if the entry exists, is a duplicate or has a bad hash value. The lookup operations involve walking long hash chains on large directories and they are done for every entry in the directory. This means certain operations have O(n^2) scalability (or worse!) and hence hurt on very large directories.

It is also used to determine if the directory has unseen entries, which involves a full hash traversal that is very expensive on large directories. Hence the directory checking for unseen ends up being roughly a O(n^2 + n) algorithm.

Switch the byaddr indexing to a radix tree. While a radix tree will burn more memory than the linked list, it gives us O(log n) lookup operations instead of O(n) on large directories, and use for tags gives us O(1) determination of whether all entries have been seen or not. This brings the "entry seen" algorithm scalability back to O(nlog n) and so is a major improvement for processing large directories.

Given a filesystem with 10M empty files in a single directory, we see:

5.6.0:

  97.56%  xfs_repair              [.] dir_hash_add.lto_priv.0
   0.38%  xfs_repair              [.] avl_ino_start.lto_priv.0
   0.37%  libc-2.31.so            [.] malloc
   0.34%  xfs_repair              [.] longform_dir2_entry_check_data.lto_priv.0

Phase 6: 10/22 12:07:13 10/22 12:10:51 3 minutes, 38 seconds

Patched:

  97.11%  xfs_repair          [.] dir_hash_add
   0.38%  xfs_repair          [.] longform_dir2_entry_check_data
   0.34%  libc-2.31.so        [.] __libc_calloc
   0.32%  xfs_repair          [.] avl_ino_start

Phase 6: 10/22 12:11:40 10/22 12:14:28 2 minutes, 48 seconds

So there's some improvement, but we are clearly still CPU bound due to the O(n^2) scalability of the duplicate name checking algorithm.

---
 libfrog/radix-tree.c |  46 +++++++++
 repair/phase6.c      | 222 ++++++++++++++++++++-----------------------
 2 files changed, 148 insertions(+), 120 deletions(-)
libfrog/radix-tree.c +46 -0
index c1c74876964c..261fc2487de9 100644
@@ -312,6 +312,52 @@ void *radix_tree_lookup_first(struct radix_tree_root *root, unsigned long *index
 
 #ifdef RADIX_TREE_TAGS
 
+/**
+ * radix_tree_tag_get - get a tag on a radix tree node
+ * @root:		radix tree root
+ * @index:		index key
+ * @tag:		tag index (< RADIX_TREE_MAX_TAGS)
+ *
+ * Return values:
+ *
+ *  0: tag not present or not set
+ *  1: tag set
+ *
+ * Note that the return value of this function may not be relied on, even if
+ * the RCU lock is held, unless tag modification and node deletion are excluded
+ * from concurrency.
+ */
+int radix_tree_tag_get(struct radix_tree_root *root,
+			unsigned long index, unsigned int tag)
+{
+	unsigned int height, shift;
+	struct radix_tree_node *slot;
+
+	height = root->height;
+	if (index > radix_tree_maxindex(height))
+		return 0;
+
+	shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
+	slot = root->rnode;
+
+	while (height > 0) {
+		int offset;
+
+		if (slot == NULL)
+			return 0;
+
+		offset = (index >> shift) & RADIX_TREE_MAP_MASK;
+		if (!tag_get(slot, tag, offset))
+			return 0;
+
+		slot = slot->slots[offset];
+		ASSERT(slot != NULL);
+		shift -= RADIX_TREE_MAP_SHIFT;
+		height--;
+	}
+	return 1;
+}
+
 /**
  *	radix_tree_tag_set - set a tag on a radix tree node
  *	@root:		radix tree root
repair/phase6.c +102 -120

383 lines not on this page · raw message

Signature · 1 line
2.30.1
#12 lore raw

PATCH 7/7 repair: scale duplicate name checking in phase 6.

In reply to Dave Chinner

From: Dave Chinner <[email protected]>

phase 6 on large directories is cpu bound on duplicate name checking due to the algorithm having effectively O(n^2) scalability. Hence when the duplicate name hash table size is far smaller than the number of directory entries, we end up with long hash chains that are searched linearly on every new entry that is found in the directory to do duplicate detection.

The in-memory hash table size is limited to 64k entries. Hence when we have millions of entries in a directory, duplicate entry lookups on the hash table have substantial overhead. Scale this table out to larger sizes so that we keep the chain lengths short and hence the O(n^2) scalability impact is limited because N is always small.

For a 10M entry directory consuming 400MB of directory data, the hash table now sizes at 6.4 million entries instead of ~64k - it is ~100x larger. While the hash table now consumes ~50MB of RAM, the xfs_repair footprint barely changes as it's using already consuming ~9GB of RAM at this point in time. IOWs, the incremental memory usage change is noise, but the directory checking time:

Unpatched:

  97.11%  xfs_repair          [.] dir_hash_add
   0.38%  xfs_repair          [.] longform_dir2_entry_check_data
   0.34%  libc-2.31.so        [.] __libc_calloc
   0.32%  xfs_repair          [.] avl_ino_start

Phase 6: 10/22 12:11:40 10/22 12:14:28 2 minutes, 48 seconds

Patched:

  46.74%  xfs_repair          [.] radix_tree_lookup
  32.13%  xfs_repair          [.] dir_hash_see_all
   7.70%  xfs_repair          [.] radix_tree_tag_get
   3.92%  xfs_repair          [.] dir_hash_add
   3.52%  xfs_repair          [.] radix_tree_tag_clear
   2.43%  xfs_repair          [.] crc32c_le

Phase 6: 10/22 13:11:01 10/22 13:11:18 17 seconds

has been reduced by an order of magnitude.

---
 repair/phase6.c | 30 ++++++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)
repair/phase6.c +24 -6
index a432856cca52..f72c92032009 100644
@@ -288,19 +288,37 @@ dir_hash_done(
 	free(hashtab);
 }
 
+/*
+ * Create a directory hash index structure based on the size of the directory we
+ * are about to try to repair. The size passed in is the size of the data
+ * segment of the directory in bytes, so we don't really know exactly how many
+ * entries are in it. Hence assume an entry size of around 64 bytes - that's a
+ * name length of 40+ bytes so should cover a most situations with large
+ * really directories.
+ */
 static struct dir_hash_tab *
 dir_hash_init(
 	xfs_fsize_t		size)
 {
-	struct dir_hash_tab	*hashtab;
+	struct dir_hash_tab	*hashtab = NULL;
 	int			hsize;
 
-	hsize = size / (16 * 4);
-	if (hsize > 65536)
-		hsize = 63336;
-	else if (hsize < 16)
+	hsize = size / 64;
+	if (hsize < 16)
 		hsize = 16;
-	if ((hashtab = calloc(DIR_HASH_TAB_SIZE(hsize), 1)) == NULL)
+
+	/*
+	 * Try to allocate as large a hash table as possible. Failure to
+	 * allocate isn't fatal, it will just result in slower performance as we
+	 * reduce the size of the table.
+	 */
+	while (hsize >= 16) {
+		hashtab = calloc(DIR_HASH_TAB_SIZE(hsize), 1);
+		if (hashtab)
+			break;
+		hsize /= 2;
+	}
+	if (!hashtab)
 		do_error(_("calloc failed in dir_hash_init\n"));
 	hashtab->size = hsize;
 	hashtab->byhash = (struct dir_hash_ent **)((char *)hashtab +
Signature · 1 line
2.30.1
#13 lore raw
In reply to Dave Chinner
Quoted 7 lines · Dave Chinner

Hi folks,

This is largely a repost of my current code so that Xiang can take over and finish it off. It applies against 5.11.0 and the performance numbers are still valid. I can't remember how much of the review comments I addressed from the first time I posted it, so the changelog is poor....

Yeah, I will catch what's missing (now looking the previous review), and follow up then...

Thanks,
Gao Xiang

Reviewed-by on v1 1/7
#2 lore raw

Re: [PATCH 1/7] workqueue: bound maximum queue depth

In reply to Dave Chinner
Quoted 25 lines · Dave Chinner

From: Dave Chinner <[email protected]>

Existing users of workqueues have bound maximum queue depths in their external algorithms (e.g. prefetch counts). For parallelising work that doesn't have an external bound, allow workqueues to throttle incoming requests at a maximum bound. Bounded workqueues also need to distribute work over all worker threads themselves as there is no external bounding or worker function throttling provided.

Existing callers are not throttled and retain direct control of worker threads, only users of the new create interface will be throttled and concurrency managed.

---
 libfrog/workqueue.c | 42 +++++++++++++++++++++++++++++++++++++++---
 libfrog/workqueue.h |  4 ++++
 2 files changed, 43 insertions(+), 3 deletions(-)
libfrog/workqueue.c +0 -0
index fe3de4289379..97f3bf76d9b9 100644

libfrog/workqueue.c workqueue_thread(void *arg) · line 48

Quoted 10 lines
libfrog/workqueue.c +4 -1
@@ -40,13 +40,21 @@ workqueue_thread(void *arg)
 		}
 
 		/*
-		 *  Dequeue work from the head of the list.
+		 *  Dequeue work from the head of the list. If the queue was
+		 *  full then send a wakeup if we're configured to do so.
 		 */
 		assert(wq->item_count > 0);
+		if (wq->max_queued && wq->item_count == wq->max_queued)
+			pthread_cond_broadcast(&wq->queue_full);

FWIW I'll probably end up changing this to:

	if (wq->max_queued)
			pthread_cond_signal(&wq->queue_full);

To support multiple producers whenever I get around to posting the giant scrub rewrite that is .... 272nd in line. In the meantime:

--D

Quoted 118 lines
libfrog/workqueue.c +34 -2
 		wi = wq->next_item;
 		wq->next_item = wi->next;
 		wq->item_count--;
 
+		if (wq->max_queued && wq->next_item) {
+			/* more work, wake up another worker */
+			pthread_cond_signal(&wq->wakeup);
+		}
 		pthread_mutex_unlock(&wq->lock);
 
 		(wi->function)(wi->queue, wi->index, wi->arg);
@@ -58,10 +66,11 @@ workqueue_thread(void *arg)
 
 /* Allocate a work queue and threads.  Returns zero or negative error code. */
 int
-workqueue_create(
+workqueue_create_bound(
 	struct workqueue	*wq,
 	void			*wq_ctx,
-	unsigned int		nr_workers)
+	unsigned int		nr_workers,
+	unsigned int		max_queue)
 {
 	unsigned int		i;
 	int			err = 0;
@@ -70,12 +79,16 @@ workqueue_create(
 	err = -pthread_cond_init(&wq->wakeup, NULL);
 	if (err)
 		return err;
+	err = -pthread_cond_init(&wq->queue_full, NULL);
+	if (err)
+		goto out_wake;
 	err = -pthread_mutex_init(&wq->lock, NULL);
 	if (err)
 		goto out_cond;
 
 	wq->wq_ctx = wq_ctx;
 	wq->thread_count = nr_workers;
+	wq->max_queued = max_queue;
 	wq->threads = malloc(nr_workers * sizeof(pthread_t));
 	if (!wq->threads) {
 		err = -errno;
@@ -102,10 +115,21 @@ workqueue_create(
 out_mutex:
 	pthread_mutex_destroy(&wq->lock);
 out_cond:
+	pthread_cond_destroy(&wq->queue_full);
+out_wake:
 	pthread_cond_destroy(&wq->wakeup);
 	return err;
 }
 
+int
+workqueue_create(
+	struct workqueue	*wq,
+	void			*wq_ctx,
+	unsigned int		nr_workers)
+{
+	return workqueue_create_bound(wq, wq_ctx, nr_workers, 0);
+}
+
 /*
  * Create a work item consisting of a function and some arguments and schedule
  * the work item to be run via the thread pool.  Returns zero or a negative
@@ -140,6 +164,7 @@ workqueue_add(
 
 	/* Now queue the new work structure to the work queue. */
 	pthread_mutex_lock(&wq->lock);
+restart:
 	if (wq->next_item == NULL) {
 		assert(wq->item_count == 0);
 		ret = -pthread_cond_signal(&wq->wakeup);
@@ -150,6 +175,16 @@ workqueue_add(
 		}
 		wq->next_item = wi;
 	} else {
+		/* throttle on a full queue if configured */
+		if (wq->max_queued && wq->item_count == wq->max_queued) {
+			pthread_cond_wait(&wq->queue_full, &wq->lock);
+			/*
+			 * Queue might be empty or even still full by the time
+			 * we get the lock back, so restart the lookup so we do
+			 * the right thing with the current state of the queue.
+			 */
+			goto restart;
+		}
 		wq->last_item->next = wi;
 	}
 	wq->last_item = wi;
@@ -201,5 +236,6 @@ workqueue_destroy(
 	free(wq->threads);
 	pthread_mutex_destroy(&wq->lock);
 	pthread_cond_destroy(&wq->wakeup);
+	pthread_cond_destroy(&wq->queue_full);
 	memset(wq, 0, sizeof(*wq));
 }
libfrog/workqueue.h +4 -0
index a56d1cf14081..a9c108d0e66a 100644
@@ -31,10 +31,14 @@ struct workqueue {
 	unsigned int		thread_count;
 	bool			terminate;
 	bool			terminated;
+	int			max_queued;
+	pthread_cond_t		queue_full;
 };
 
 int workqueue_create(struct workqueue *wq, void *wq_ctx,
 		unsigned int nr_workers);
+int workqueue_create_bound(struct workqueue *wq, void *wq_ctx,
+		unsigned int nr_workers, unsigned int max_queue);
 int workqueue_add(struct workqueue *wq, workqueue_func_t fn,
 		uint32_t index, void *arg);
 int workqueue_terminate(struct workqueue *wq);
Signature · 1 line
2.30.1
Reviewed-by on v1 3/7
#7 lore raw

Re: [PATCH 3/7] repair: protect inode chunk tree records with a mutex

In reply to Dave Chinner
Quoted 12 lines · Dave Chinner

From: Dave Chinner <[email protected]>

Phase 6 accesses inode chunk records mostly in an isolated manner. However, when it finds a corruption in a directory or there are multiple hardlinks to an inode, there can be concurrent access to the inode chunk record to update state.

Hence the inode record itself needs a mutex. This protects all state changes within the inode chunk record, as well as inode link counts and chunk references. That allows us to process multiple chunks at once, providing concurrency within an AG as well as across AGs.

Quoted 7 lines

The inode chunk tree itself is not modified in the directory scanning and rebuilding part of phase 6 which we are making concurrent, hence we do not need to worry about locking for AVL tree lookups to find the inode chunk records themselves. Therefore internal locking is all we need here.

Hmm, didn't I review this last time? ;)

--D

Quoted 241 lines
---
 repair/incore.h     | 23 +++++++++++++++++++++++
 repair/incore_ino.c | 15 +++++++++++++++
 2 files changed, 38 insertions(+)
repair/incore.h +23 -0
index 977e5dd04336..d64315fd2585 100644
@@ -281,6 +281,7 @@ typedef struct ino_tree_node  {
 		parent_list_t	*plist;		/* phases 2-5 */
 	} ino_un;
 	uint8_t			*ftypes;	/* phases 3,6 */
+	pthread_mutex_t		lock;
 } ino_tree_node_t;
 
 #define INOS_PER_IREC	(sizeof(uint64_t) * NBBY)
@@ -411,7 +412,9 @@ next_free_ino_rec(ino_tree_node_t *ino_rec)
  */
 static inline void add_inode_refchecked(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_un.ex_data->ino_processed |= IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline int is_inode_refchecked(struct ino_tree_node *irec, int offset)
@@ -437,12 +440,16 @@ static inline int is_inode_confirmed(struct ino_tree_node *irec, int offset)
  */
 static inline void set_inode_isadir(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_isa_dir |= IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline void clear_inode_isadir(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_isa_dir &= ~IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline int inode_isadir(struct ino_tree_node *irec, int offset)
@@ -455,15 +462,19 @@ static inline int inode_isadir(struct ino_tree_node *irec, int offset)
  */
 static inline void set_inode_free(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	set_inode_confirmed(irec, offset);
 	irec->ir_free |= XFS_INOBT_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 
 }
 
 static inline void set_inode_used(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	set_inode_confirmed(irec, offset);
 	irec->ir_free &= ~XFS_INOBT_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline int is_inode_free(struct ino_tree_node *irec, int offset)
@@ -476,7 +487,9 @@ static inline int is_inode_free(struct ino_tree_node *irec, int offset)
  */
 static inline void set_inode_sparse(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ir_sparse |= XFS_INOBT_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline bool is_inode_sparse(struct ino_tree_node *irec, int offset)
@@ -489,12 +502,16 @@ static inline bool is_inode_sparse(struct ino_tree_node *irec, int offset)
  */
 static inline void set_inode_was_rl(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_was_rl |= IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline void clear_inode_was_rl(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_was_rl &= ~IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline int inode_was_rl(struct ino_tree_node *irec, int offset)
@@ -507,12 +524,16 @@ static inline int inode_was_rl(struct ino_tree_node *irec, int offset)
  */
 static inline void set_inode_is_rl(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_is_rl |= IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline void clear_inode_is_rl(struct ino_tree_node *irec, int offset)
 {
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_is_rl &= ~IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 static inline int inode_is_rl(struct ino_tree_node *irec, int offset)
@@ -545,7 +566,9 @@ static inline int is_inode_reached(struct ino_tree_node *irec, int offset)
 static inline void add_inode_reached(struct ino_tree_node *irec, int offset)
 {
 	add_inode_ref(irec, offset);
+	pthread_mutex_lock(&irec->lock);
 	irec->ino_un.ex_data->ino_reached |= IREC_MASK(offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 /*
repair/incore_ino.c +15 -0
index 82956ae93005..299e4f949e5e 100644
@@ -91,6 +91,7 @@ void add_inode_ref(struct ino_tree_node *irec, int ino_offset)
 {
 	ASSERT(irec->ino_un.ex_data != NULL);
 
+	pthread_mutex_lock(&irec->lock);
 	switch (irec->nlink_size) {
 	case sizeof(uint8_t):
 		if (irec->ino_un.ex_data->counted_nlinks.un8[ino_offset] < 0xff) {
@@ -112,6 +113,7 @@ void add_inode_ref(struct ino_tree_node *irec, int ino_offset)
 	default:
 		ASSERT(0);
 	}
+	pthread_mutex_unlock(&irec->lock);
 }
 
 void drop_inode_ref(struct ino_tree_node *irec, int ino_offset)
@@ -120,6 +122,7 @@ void drop_inode_ref(struct ino_tree_node *irec, int ino_offset)
 
 	ASSERT(irec->ino_un.ex_data != NULL);
 
+	pthread_mutex_lock(&irec->lock);
 	switch (irec->nlink_size) {
 	case sizeof(uint8_t):
 		ASSERT(irec->ino_un.ex_data->counted_nlinks.un8[ino_offset] > 0);
@@ -139,6 +142,7 @@ void drop_inode_ref(struct ino_tree_node *irec, int ino_offset)
 
 	if (refs == 0)
 		irec->ino_un.ex_data->ino_reached &= ~IREC_MASK(ino_offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 uint32_t num_inode_references(struct ino_tree_node *irec, int ino_offset)
@@ -161,6 +165,7 @@ uint32_t num_inode_references(struct ino_tree_node *irec, int ino_offset)
 void set_inode_disk_nlinks(struct ino_tree_node *irec, int ino_offset,
 		uint32_t nlinks)
 {
+	pthread_mutex_lock(&irec->lock);
 	switch (irec->nlink_size) {
 	case sizeof(uint8_t):
 		if (nlinks < 0xff) {
@@ -182,6 +187,7 @@ void set_inode_disk_nlinks(struct ino_tree_node *irec, int ino_offset,
 	default:
 		ASSERT(0);
 	}
+	pthread_mutex_unlock(&irec->lock);
 }
 
 uint32_t get_inode_disk_nlinks(struct ino_tree_node *irec, int ino_offset)
@@ -253,6 +259,7 @@ alloc_ino_node(
 	irec->nlink_size = sizeof(uint8_t);
 	irec->disk_nlinks.un8 = alloc_nlink_array(irec->nlink_size);
 	irec->ftypes = alloc_ftypes_array(mp);
+	pthread_mutex_init(&irec->lock, NULL);
 	return irec;
 }
 
@@ -294,6 +301,7 @@ free_ino_tree_node(
 	}
 
 	free(irec->ftypes);
+	pthread_mutex_destroy(&irec->lock);
 	free(irec);
 }
 
@@ -600,6 +608,7 @@ set_inode_parent(
 	uint64_t		bitmask;
 	parent_entry_t		*tmp;
 
+	pthread_mutex_lock(&irec->lock);
 	if (full_ino_ex_data)
 		ptbl = irec->ino_un.ex_data->parents;
 	else
@@ -625,6 +634,7 @@ set_inode_parent(
 #endif
 		ptbl->pentries[0] = parent;
 
+		pthread_mutex_unlock(&irec->lock);
 		return;
 	}
 
@@ -642,6 +652,7 @@ set_inode_parent(
 #endif
 		ptbl->pentries[target] = parent;
 
+		pthread_mutex_unlock(&irec->lock);
 		return;
 	}
 
@@ -682,6 +693,7 @@ set_inode_parent(
 #endif
 	ptbl->pentries[target] = parent;
 	ptbl->pmask |= (1ULL << offset);
+	pthread_mutex_unlock(&irec->lock);
 }
 
 xfs_ino_t
@@ -692,6 +704,7 @@ get_inode_parent(ino_tree_node_t *irec, int offset)
 	int		i;
 	int		target;
 
+	pthread_mutex_lock(&irec->lock);
 	if (full_ino_ex_data)
 		ptbl = irec->ino_un.ex_data->parents;
 	else
@@ -709,9 +722,11 @@ get_inode_parent(ino_tree_node_t *irec, int offset)
 #ifdef DEBUG
 		ASSERT(target < ptbl->cnt);
 #endif
+		pthread_mutex_unlock(&irec->lock);
 		return(ptbl->pentries[target]);
 	}
 
+	pthread_mutex_unlock(&irec->lock);
 	return(0LL);
 }
 
Signature · 1 line
2.30.1
#4 lore raw

Re: [PATCH 2/7] repair: Protect bad inode list with mutex

In reply to Dave Chinner
Quoted 8 lines · Dave Chinner

From: Dave Chinner <[email protected]>

To enable phase 6 parallelisation, we need to protect the bad inode list from concurrent modification and/or access. Wrap it with a mutex and clean up the nasty typedefs.

FWIW, if you (Gao at this point, I surmise) want to dig deeper into the comment that Christoph made during the last review of this patchset, repair already /does/ have a resizing array structure in repair/slab.c.

That /would/ decrease the memory overhead of the bad inode list by 50%, though I would hope that bad inodes are a rare enough occurrence that it doesn't matter much...

--D

Quoted 73 lines
---
 repair/dir2.c | 32 +++++++++++++++++++++-----------
 1 file changed, 21 insertions(+), 11 deletions(-)
repair/dir2.c +21 -11
index eabdb4f2d497..23333e59a382 100644
@@ -20,40 +20,50 @@
  * Known bad inode list.  These are seen when the leaf and node
  * block linkages are incorrect.
  */
-typedef struct dir2_bad {
+struct dir2_bad {
 	xfs_ino_t	ino;
 	struct dir2_bad	*next;
-} dir2_bad_t;
+};
 
-static dir2_bad_t *dir2_bad_list;
+static struct dir2_bad	*dir2_bad_list;
+pthread_mutex_t		dir2_bad_list_lock = PTHREAD_MUTEX_INITIALIZER;
 
 static void
 dir2_add_badlist(
 	xfs_ino_t	ino)
 {
-	dir2_bad_t	*l;
+	struct dir2_bad	*l;
 
-	if ((l = malloc(sizeof(dir2_bad_t))) == NULL) {
+	l = malloc(sizeof(*l));
+	if (!l) {
 		do_error(
 _("malloc failed (%zu bytes) dir2_add_badlist:ino %" PRIu64 "\n"),
-			sizeof(dir2_bad_t), ino);
+			sizeof(*l), ino);
 		exit(1);
 	}
+	pthread_mutex_lock(&dir2_bad_list_lock);
 	l->next = dir2_bad_list;
 	dir2_bad_list = l;
 	l->ino = ino;
+	pthread_mutex_unlock(&dir2_bad_list_lock);
 }
 
 int
 dir2_is_badino(
 	xfs_ino_t	ino)
 {
-	dir2_bad_t	*l;
+	struct dir2_bad	*l;
+	int		ret = 0;
 
-	for (l = dir2_bad_list; l; l = l->next)
-		if (l->ino == ino)
-			return 1;
-	return 0;
+	pthread_mutex_lock(&dir2_bad_list_lock);
+	for (l = dir2_bad_list; l; l = l->next) {
+		if (l->ino == ino) {
+			ret = 1;
+			break;
+		}
+	}
+	pthread_mutex_unlock(&dir2_bad_list_lock);
+	return ret;
 }
 
 /*
Signature · 1 line
2.30.1
Reviewed-by Reviewed-by
#14 lore raw
In reply to Gao Xiang
Quoted 11 lines · Gao Xiang
Quoted 7 lines · Dave Chinner

Hi folks,

This is largely a repost of my current code so that Xiang can take over and finish it off. It applies against 5.11.0 and the performance numbers are still valid. I can't remember how much of the review comments I addressed from the first time I posted it, so the changelog is poor....

Yeah, I will catch what's missing (now looking the previous review), and follow up then...

:)

While you're revising the patches, you might as well convert:

into:

because Exchange is so awful for inline replies that I don't use that email address anymore.

--D

Quoted 3 lines

Thanks,
Gao Xiang

#5 lore raw

Re: [PATCH 2/7] repair: Protect bad inode list with mutex

In reply to Darrick J. Wong
Quoted 7 lines · Darrick J. Wong
Quoted 6 lines · Dave Chinner

From: Dave Chinner <[email protected]>

To enable phase 6 parallelisation, we need to protect the bad inode list from concurrent modification and/or access. Wrap it with a mutex and clean up the nasty typedefs.

Quoted 6 lines
Quoted 2 lines

FWIW, if you (Gao at this point, I surmise) want to dig deeper into the comment that Christoph made during the last review of this patchset, repair already /does/ have a resizing array structure in repair/slab.c.

Put it in another patchset, please.

Everyone, can we please get out of the habit of asking for extra cleanups to be done as a condition for getting a change merged just because the patchset makes a change to slightly crufty but perfectly working code?

Cleaning up this code is not necessary for this patchset to achieve it's goals or make forwards progress. Yes, the code that locking is being added to is slightly crusty, but it is not broken nor is showing up on profiles as being a performance, scalability or memory usage limiting factor. Changing the algorithm of this code is therefore unnecessary to acheive the goals of this patchset.

IOWs, put this aside this cleanup as future work on a rainy day when we have fixed all the bigger scalability problems and have nothing better to do.

"If it ain't broke, don't fix it."

Cheers,

Dave.

Signature · 2 lines
Dave Chinner
[email protected]
Reviewed-by on v1 6/7
#11 lore raw

Re: [PATCH 6/7] repair: convert the dir byaddr hash to a radix tree

In reply to Dave Chinner
Quoted 43 lines · Dave Chinner

From: Dave Chinner <[email protected]>

Phase 6 uses a hash table to track the data segment addresses of the entries it has seen in a directory. This is indexed by the offset into the data segment for the dirent, and is used to check if the entry exists, is a duplicate or has a bad hash value. The lookup operations involve walking long hash chains on large directories and they are done for every entry in the directory. This means certain operations have O(n^2) scalability (or worse!) and hence hurt on very large directories.

It is also used to determine if the directory has unseen entries, which involves a full hash traversal that is very expensive on large directories. Hence the directory checking for unseen ends up being roughly a O(n^2 + n) algorithm.

Switch the byaddr indexing to a radix tree. While a radix tree will burn more memory than the linked list, it gives us O(log n) lookup operations instead of O(n) on large directories, and use for tags gives us O(1) determination of whether all entries have been seen or not. This brings the "entry seen" algorithm scalability back to O(nlog n) and so is a major improvement for processing large directories.

Given a filesystem with 10M empty files in a single directory, we see:

5.6.0:

  97.56%  xfs_repair              [.] dir_hash_add.lto_priv.0
   0.38%  xfs_repair              [.] avl_ino_start.lto_priv.0
   0.37%  libc-2.31.so            [.] malloc
   0.34%  xfs_repair              [.] longform_dir2_entry_check_data.lto_priv.0

Phase 6: 10/22 12:07:13 10/22 12:10:51 3 minutes, 38 seconds

Patched:

  97.11%  xfs_repair          [.] dir_hash_add
   0.38%  xfs_repair          [.] longform_dir2_entry_check_data
   0.34%  libc-2.31.so        [.] __libc_calloc
   0.32%  xfs_repair          [.] avl_ino_start
Quoted 6 lines

Phase 6: 10/22 12:11:40 10/22 12:14:28 2 minutes, 48 seconds

So there's some improvement, but we are clearly still CPU bound due to the O(n^2) scalability of the duplicate name checking algorithm.

Didn't I RVB this last time?

--D

Quoted 469 lines
---
 libfrog/radix-tree.c |  46 +++++++++
 repair/phase6.c      | 222 ++++++++++++++++++++-----------------------
 2 files changed, 148 insertions(+), 120 deletions(-)
libfrog/radix-tree.c +46 -0
index c1c74876964c..261fc2487de9 100644
@@ -312,6 +312,52 @@ void *radix_tree_lookup_first(struct radix_tree_root *root, unsigned long *index
 
 #ifdef RADIX_TREE_TAGS
 
+/**
+ * radix_tree_tag_get - get a tag on a radix tree node
+ * @root:		radix tree root
+ * @index:		index key
+ * @tag:		tag index (< RADIX_TREE_MAX_TAGS)
+ *
+ * Return values:
+ *
+ *  0: tag not present or not set
+ *  1: tag set
+ *
+ * Note that the return value of this function may not be relied on, even if
+ * the RCU lock is held, unless tag modification and node deletion are excluded
+ * from concurrency.
+ */
+int radix_tree_tag_get(struct radix_tree_root *root,
+			unsigned long index, unsigned int tag)
+{
+	unsigned int height, shift;
+	struct radix_tree_node *slot;
+
+	height = root->height;
+	if (index > radix_tree_maxindex(height))
+		return 0;
+
+	shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
+	slot = root->rnode;
+
+	while (height > 0) {
+		int offset;
+
+		if (slot == NULL)
+			return 0;
+
+		offset = (index >> shift) & RADIX_TREE_MAP_MASK;
+		if (!tag_get(slot, tag, offset))
+			return 0;
+
+		slot = slot->slots[offset];
+		ASSERT(slot != NULL);
+		shift -= RADIX_TREE_MAP_SHIFT;
+		height--;
+	}
+	return 1;
+}
+
 /**
  *	radix_tree_tag_set - set a tag on a radix tree node
  *	@root:		radix tree root
repair/phase6.c +102 -120
index 440b6a2982df..a432856cca52 100644
@@ -66,8 +66,7 @@ add_dotdot_update(
  * and whether their leaf entry has been seen. Also used for name
  * duplicate checking and rebuilding step if required.
  */
-typedef struct dir_hash_ent {
-	struct dir_hash_ent	*nextbyaddr;	/* next in addr bucket */
+struct dir_hash_ent {
 	struct dir_hash_ent	*nextbyhash;	/* next in name bucket */
 	struct dir_hash_ent	*nextbyorder;	/* next in order added */
 	xfs_dahash_t		hashval;	/* hash value of name */
@@ -76,18 +75,19 @@ typedef struct dir_hash_ent {
 	short			junkit;		/* name starts with / */
 	short			seen;		/* have seen leaf entry */
 	struct xfs_name		name;
-} dir_hash_ent_t;
+};
 
-typedef struct dir_hash_tab {
+struct dir_hash_tab {
 	int			size;		/* size of hash tables */
-	dir_hash_ent_t		*first;		/* ptr to first added entry */
-	dir_hash_ent_t		*last;		/* ptr to last added entry */
-	dir_hash_ent_t		**byhash;	/* ptr to name hash buckets */
-	dir_hash_ent_t		**byaddr;	/* ptr to addr hash buckets */
-} dir_hash_tab_t;
+	struct dir_hash_ent	*first;		/* ptr to first added entry */
+	struct dir_hash_ent	*last;		/* ptr to last added entry */
+	struct dir_hash_ent	**byhash;	/* ptr to name hash buckets */
+#define HT_UNSEEN		1
+	struct radix_tree_root	byaddr;
+};
 
 #define	DIR_HASH_TAB_SIZE(n)	\
-	(sizeof(dir_hash_tab_t) + (sizeof(dir_hash_ent_t *) * (n) * 2))
+	(sizeof(struct dir_hash_tab) + (sizeof(struct dir_hash_ent *) * (n)))
 #define	DIR_HASH_FUNC(t,a)	((a) % (t)->size)
 
 /*
@@ -154,8 +154,8 @@ dir_read_buf(
  */
 static int
 dir_hash_add(
-	xfs_mount_t		*mp,
-	dir_hash_tab_t		*hashtab,
+	struct xfs_mount	*mp,
+	struct dir_hash_tab	*hashtab,
 	uint32_t		addr,
 	xfs_ino_t		inum,
 	int			namelen,
@@ -163,19 +163,18 @@ dir_hash_add(
 	uint8_t			ftype)
 {
 	xfs_dahash_t		hash = 0;
-	int			byaddr;
 	int			byhash = 0;
-	dir_hash_ent_t		*p;
+	struct dir_hash_ent	*p;
 	int			dup;
 	short			junk;
 	struct xfs_name		xname;
+	int			error;
 
 	xname.name = name;
 	xname.len = namelen;
 	xname.type = ftype;
 
 	junk = name[0] == '/';
-	byaddr = DIR_HASH_FUNC(hashtab, addr);
 	dup = 0;
 
 	if (!junk) {
@@ -205,8 +204,14 @@ dir_hash_add(
 		do_error(_("malloc failed in dir_hash_add (%zu bytes)\n"),
 			sizeof(*p));
 
-	p->nextbyaddr = hashtab->byaddr[byaddr];
-	hashtab->byaddr[byaddr] = p;
+	error = radix_tree_insert(&hashtab->byaddr, addr, p);
+	if (error == EEXIST) {
+		do_warn(_("duplicate addrs %u in directory!\n"), addr);
+		free(p);
+		return 0;
+	}
+	radix_tree_tag_set(&hashtab->byaddr, addr, HT_UNSEEN);
+
 	if (hashtab->last)
 		hashtab->last->nextbyorder = p;
 	else
@@ -232,33 +237,14 @@ dir_hash_add(
 	return !dup;
 }
 
-/*
- * checks to see if any data entries are not in the leaf blocks
- */
-static int
-dir_hash_unseen(
-	dir_hash_tab_t	*hashtab)
-{
-	int		i;
-	dir_hash_ent_t	*p;
-
-	for (i = 0; i < hashtab->size; i++) {
-		for (p = hashtab->byaddr[i]; p; p = p->nextbyaddr) {
-			if (p->seen == 0)
-				return 1;
-		}
-	}
-	return 0;
-}
-
 static int
 dir_hash_check(
-	dir_hash_tab_t	*hashtab,
-	xfs_inode_t	*ip,
-	int		seeval)
+	struct dir_hash_tab	*hashtab,
+	struct xfs_inode	*ip,
+	int			seeval)
 {
-	static char	*seevalstr[DIR_HASH_CK_TOTAL];
-	static int	done;
+	static char		*seevalstr[DIR_HASH_CK_TOTAL];
+	static int		done;
 
 	if (!done) {
 		seevalstr[DIR_HASH_CK_OK] = _("ok");
@@ -270,7 +256,8 @@ dir_hash_check(
 		done = 1;
 	}
 
-	if (seeval == DIR_HASH_CK_OK && dir_hash_unseen(hashtab))
+	if (seeval == DIR_HASH_CK_OK &&
+	    radix_tree_tagged(&hashtab->byaddr, HT_UNSEEN))
 		seeval = DIR_HASH_CK_NOLEAF;
 	if (seeval == DIR_HASH_CK_OK)
 		return 0;
@@ -285,27 +272,28 @@ dir_hash_check(
 
 static void
 dir_hash_done(
-	dir_hash_tab_t	*hashtab)
+	struct dir_hash_tab	*hashtab)
 {
-	int		i;
-	dir_hash_ent_t	*n;
-	dir_hash_ent_t	*p;
+	int			i;
+	struct dir_hash_ent	*n;
+	struct dir_hash_ent	*p;
 
 	for (i = 0; i < hashtab->size; i++) {
-		for (p = hashtab->byaddr[i]; p; p = n) {
-			n = p->nextbyaddr;
+		for (p = hashtab->byhash[i]; p; p = n) {
+			n = p->nextbyhash;
+			radix_tree_delete(&hashtab->byaddr, p->address);
 			free(p);
 		}
 	}
 	free(hashtab);
 }
 
-static dir_hash_tab_t *
+static struct dir_hash_tab *
 dir_hash_init(
-	xfs_fsize_t	size)
+	xfs_fsize_t		size)
 {
-	dir_hash_tab_t	*hashtab;
-	int		hsize;
+	struct dir_hash_tab	*hashtab;
+	int			hsize;
 
 	hsize = size / (16 * 4);
 	if (hsize > 65536)
@@ -315,51 +303,43 @@ dir_hash_init(
 	if ((hashtab = calloc(DIR_HASH_TAB_SIZE(hsize), 1)) == NULL)
 		do_error(_("calloc failed in dir_hash_init\n"));
 	hashtab->size = hsize;
-	hashtab->byhash = (dir_hash_ent_t**)((char *)hashtab +
-		sizeof(dir_hash_tab_t));
-	hashtab->byaddr = (dir_hash_ent_t**)((char *)hashtab +
-		sizeof(dir_hash_tab_t) + sizeof(dir_hash_ent_t*) * hsize);
+	hashtab->byhash = (struct dir_hash_ent **)((char *)hashtab +
+		sizeof(struct dir_hash_tab));
+	INIT_RADIX_TREE(&hashtab->byaddr, 0);
 	return hashtab;
 }
 
 static int
 dir_hash_see(
-	dir_hash_tab_t		*hashtab,
+	struct dir_hash_tab	*hashtab,
 	xfs_dahash_t		hash,
 	xfs_dir2_dataptr_t	addr)
 {
-	int			i;
-	dir_hash_ent_t		*p;
+	struct dir_hash_ent	*p;
 
-	i = DIR_HASH_FUNC(hashtab, addr);
-	for (p = hashtab->byaddr[i]; p; p = p->nextbyaddr) {
-		if (p->address != addr)
-			continue;
-		if (p->seen)
-			return DIR_HASH_CK_DUPLEAF;
-		if (p->junkit == 0 && p->hashval != hash)
-			return DIR_HASH_CK_BADHASH;
-		p->seen = 1;
-		return DIR_HASH_CK_OK;
-	}
-	return DIR_HASH_CK_NODATA;
+	p = radix_tree_lookup(&hashtab->byaddr, addr);
+	if (!p)
+		return DIR_HASH_CK_NODATA;
+	if (!radix_tree_tag_get(&hashtab->byaddr, addr, HT_UNSEEN))
+		return DIR_HASH_CK_DUPLEAF;
+	if (p->junkit == 0 && p->hashval != hash)
+		return DIR_HASH_CK_BADHASH;
+	radix_tree_tag_clear(&hashtab->byaddr, addr, HT_UNSEEN);
+	return DIR_HASH_CK_OK;
 }
 
 static void
 dir_hash_update_ftype(
-	dir_hash_tab_t		*hashtab,
+	struct dir_hash_tab	*hashtab,
 	xfs_dir2_dataptr_t	addr,
 	uint8_t			ftype)
 {
-	int			i;
-	dir_hash_ent_t		*p;
+	struct dir_hash_ent	*p;
 
-	i = DIR_HASH_FUNC(hashtab, addr);
-	for (p = hashtab->byaddr[i]; p; p = p->nextbyaddr) {
-		if (p->address != addr)
-			continue;
-		p->name.type = ftype;
-	}
+	p = radix_tree_lookup(&hashtab->byaddr, addr);
+	if (!p)
+		return;
+	p->name.type = ftype;
 }
 
 /*
@@ -368,7 +348,7 @@ dir_hash_update_ftype(
  */
 static int
 dir_hash_see_all(
-	dir_hash_tab_t		*hashtab,
+	struct dir_hash_tab	*hashtab,
 	xfs_dir2_leaf_entry_t	*ents,
 	int			count,
 	int			stale)
@@ -1222,19 +1202,19 @@ dir_binval(
 
 static void
 longform_dir2_rebuild(
-	xfs_mount_t		*mp,
+	struct xfs_mount	*mp,
 	xfs_ino_t		ino,
-	xfs_inode_t		*ip,
-	ino_tree_node_t		*irec,
+	struct xfs_inode	*ip,
+	struct ino_tree_node	*irec,
 	int			ino_offset,
-	dir_hash_tab_t		*hashtab)
+	struct dir_hash_tab	*hashtab)
 {
 	int			error;
 	int			nres;
-	xfs_trans_t		*tp;
+	struct xfs_trans	*tp;
 	xfs_fileoff_t		lastblock;
-	xfs_inode_t		pip;
-	dir_hash_ent_t		*p;
+	struct xfs_inode	pip;
+	struct dir_hash_ent	*p;
 	int			done = 0;
 
 	/*
@@ -1393,14 +1373,14 @@ _("directory shrink failed (%d)\n"), error);
  */
 static void
 longform_dir2_entry_check_data(
-	xfs_mount_t		*mp,
-	xfs_inode_t		*ip,
+	struct xfs_mount	*mp,
+	struct xfs_inode	*ip,
 	int			*num_illegal,
 	int			*need_dot,
-	ino_tree_node_t		*current_irec,
+	struct ino_tree_node	*current_irec,
 	int			current_ino_offset,
 	struct xfs_buf		*bp,
-	dir_hash_tab_t		*hashtab,
+	struct dir_hash_tab	*hashtab,
 	freetab_t		**freetabp,
 	xfs_dablk_t		da_bno,
 	int			isblock)
@@ -1927,10 +1907,10 @@ check_dir3_header(
  */
 static int
 longform_dir2_check_leaf(
-	xfs_mount_t		*mp,
-	xfs_inode_t		*ip,
-	dir_hash_tab_t		*hashtab,
-	freetab_t		*freetab)
+	struct xfs_mount	*mp,
+	struct xfs_inode	*ip,
+	struct dir_hash_tab	*hashtab,
+	struct freetab		*freetab)
 {
 	int			badtail;
 	__be16			*bestsp;
@@ -2012,10 +1992,10 @@ longform_dir2_check_leaf(
  */
 static int
 longform_dir2_check_node(
-	xfs_mount_t		*mp,
-	xfs_inode_t		*ip,
-	dir_hash_tab_t		*hashtab,
-	freetab_t		*freetab)
+	struct xfs_mount	*mp,
+	struct xfs_inode	*ip,
+	struct dir_hash_tab	*hashtab,
+	struct freetab		*freetab)
 {
 	struct xfs_buf		*bp;
 	xfs_dablk_t		da_bno;
@@ -2187,14 +2167,15 @@ longform_dir2_check_node(
  * (ie. get libxfs to do all the grunt work)
  */
 static void
-longform_dir2_entry_check(xfs_mount_t	*mp,
-			xfs_ino_t	ino,
-			xfs_inode_t	*ip,
-			int		*num_illegal,
-			int		*need_dot,
-			ino_tree_node_t	*irec,
-			int		ino_offset,
-			dir_hash_tab_t	*hashtab)
+longform_dir2_entry_check(
+	struct xfs_mount	*mp,
+	xfs_ino_t		ino,
+	struct xfs_inode	*ip,
+	int			*num_illegal,
+	int			*need_dot,
+	struct ino_tree_node	*irec,
+	int			ino_offset,
+	struct dir_hash_tab	*hashtab)
 {
 	struct xfs_buf		*bp;
 	xfs_dablk_t		da_bno;
@@ -2397,13 +2378,14 @@ shortform_dir2_junk(
 }
 
 static void
-shortform_dir2_entry_check(xfs_mount_t	*mp,
-			xfs_ino_t	ino,
-			xfs_inode_t	*ip,
-			int		*ino_dirty,
-			ino_tree_node_t	*current_irec,
-			int		current_ino_offset,
-			dir_hash_tab_t	*hashtab)
+shortform_dir2_entry_check(
+	struct xfs_mount	*mp,
+	xfs_ino_t		ino,
+	struct xfs_inode	*ip,
+	int			*ino_dirty,
+	struct ino_tree_node	*current_irec,
+	int			current_ino_offset,
+	struct dir_hash_tab	*hashtab)
 {
 	xfs_ino_t		lino;
 	xfs_ino_t		parent;
@@ -2745,15 +2727,15 @@ _("entry \"%s\" (ino %" PRIu64 ") in dir %" PRIu64 " is a duplicate name"),
  */
 static void
 process_dir_inode(
-	xfs_mount_t 		*mp,
+	struct xfs_mount	*mp,
 	xfs_agnumber_t		agno,
-	ino_tree_node_t		*irec,
+	struct ino_tree_node	*irec,
 	int			ino_offset)
 {
 	xfs_ino_t		ino;
-	xfs_inode_t		*ip;
-	xfs_trans_t		*tp;
-	dir_hash_tab_t		*hashtab;
+	struct xfs_inode	*ip;
+	struct xfs_trans	*tp;
+	struct dir_hash_tab	*hashtab;
 	int			need_dot;
 	int			dirty, num_illegal, error, nres;
 
Signature · 1 line
2.30.1
#15 lore raw
In reply to Darrick J. Wong
Quoted 17 lines · Darrick J. Wong
Quoted 11 lines · Gao Xiang
Quoted 7 lines · Dave Chinner

Hi folks,

This is largely a repost of my current code so that Xiang can take over and finish it off. It applies against 5.11.0 and the performance numbers are still valid. I can't remember how much of the review comments I addressed from the first time I posted it, so the changelog is poor....

Yeah, I will catch what's missing (now looking the previous review), and follow up then...

:)

While you're revising the patches, you might as well convert:

Quoted 8 lines

into:

because Exchange is so awful for inline replies that I don't use that email address anymore.

Yeah, I'm just starting sorting out all previous opinions and patches diff. Will update in the next version.

Thanks,
Gao Xiang

Quoted 7 lines

--D

Quoted 3 lines

Thanks,
Gao Xiang

#16 lore raw

Hi Dave and Darrick,

Quoted 22 lines · Gao Xiang
Quoted 21 lines · Darrick J. Wong
Quoted 11 lines · Gao Xiang
Quoted 7 lines · Dave Chinner

Hi folks,

This is largely a repost of my current code so that Xiang can take over and finish it off. It applies against 5.11.0 and the performance numbers are still valid. I can't remember how much of the review comments I addressed from the first time I posted it, so the changelog is poor....

Yeah, I will catch what's missing (now looking the previous review), and follow up then...

:)

While you're revising the patches, you might as well convert:

into:

Quoted 8 lines
Quoted 4 lines

because Exchange is so awful for inline replies that I don't use that email address anymore.

Yeah, I'm just starting sorting out all previous opinions and patches diff. Will update in the next version.

Sorry for bothering... After reading the previous discussion for a while, I'm fine with the trivial cleanups. Yet, it seems that there are mainly 2 remaining open discussions unsolved yet...

1 is magic number 1000,
https://lore.kernel.org/r/20201029172045.GP1061252@magnolia

while I also don't have better ideas of this (and have no idea why queue depth 1000 is optimal compared with other configurations), so it'd be better to get your thoughts about this in advance (e.g. just leave it as-is, or... plus, I don't have such test setting with such many cpus)

2 is the hash size modificiation,
https://lore.kernel.org/r/20201029162922.GM1061252@magnolia/

it seems previously hash entires are limited to 64k, and this patch relaxes such limitation, but for huge directories I'm not sure the hash table utilization but from the previous commit message it seems the extra memory usage can be ignored.

Anyway, I'm fine with just leave them as-is if agreed on these.

Thanks,
Gao Xiang

Quoted 10 lines

Thanks,
Gao Xiang

Quoted 7 lines

--D

Quoted 3 lines

Thanks,
Gao Xiang

#17 lore raw
Quoted 49 lines · Gao Xiang

Hi Dave and Darrick,

Quoted 22 lines · Gao Xiang
Quoted 21 lines · Darrick J. Wong
Quoted 11 lines · Gao Xiang
Quoted 7 lines · Dave Chinner

Hi folks,

This is largely a repost of my current code so that Xiang can take over and finish it off. It applies against 5.11.0 and the performance numbers are still valid. I can't remember how much of the review comments I addressed from the first time I posted it, so the changelog is poor....

Yeah, I will catch what's missing (now looking the previous review), and follow up then...

:)

While you're revising the patches, you might as well convert:

into:

Quoted 8 lines
Quoted 4 lines

because Exchange is so awful for inline replies that I don't use that email address anymore.

Yeah, I'm just starting sorting out all previous opinions and patches diff. Will update in the next version.

Sorry for bothering... After reading the previous discussion for a while, I'm fine with the trivial cleanups. Yet, it seems that there are mainly 2 remaining open discussions unsolved yet...

1 is magic number 1000,
https://lore.kernel.org/r/20201029172045.GP1061252@magnolia

while I also don't have better ideas of this (and have no idea why queue depth 1000 is optimal compared with other configurations), so it'd be better to get your thoughts about this in advance (e.g. just leave it as-is, or... plus, I don't have such test setting with such many cpus)

2 is the hash size modificiation,
https://lore.kernel.org/r/20201029162922.GM1061252@magnolia/

Quoted 6 lines

it seems previously hash entires are limited to 64k, and this patch relaxes such limitation, but for huge directories I'm not sure the hash table utilization but from the previous commit message it seems the extra memory usage can be ignored.

Anyway, I'm fine with just leave them as-is if agreed on these.

FWIW I didn't have any specific objections to either magic number, I simply wanted to know where they came from and why. :)

--D

Quoted 14 lines

Thanks,
Gao Xiang

Quoted 10 lines

Thanks,
Gao Xiang

Quoted 7 lines

--D

Quoted 3 lines

Thanks,
Gao Xiang