Skip to contentSkip to conversation

kunit: make test->lock irq safe

PATCH Superseded [email protected] 5 participants 11 messages Apr 13, 2021 – Apr 15, 2021

Subsystems (5)

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/3 kunit: make test->lock irq safe

From: Vlastimil Babka <[email protected]>

The upcoming SLUB kunit test will be calling kunit_find_named_resource() from a context with disabled interrupts. That means kunit's test->lock needs to be IRQ safe to avoid potential deadlocks and lockdep splats.

This patch therefore changes the test->lock usage to spin_lock_irqsave() and spin_unlock_irqrestore().

---
 include/kunit/test.h |  5 +++--
 lib/kunit/test.c     | 18 +++++++++++-------
 2 files changed, 14 insertions(+), 9 deletions(-)
include/kunit/test.h +3 -2
index 49601c4b98b8..524d4789af22 100644
@@ -515,8 +515,9 @@ kunit_find_resource(struct kunit *test,
 		    void *match_data)
 {
 	struct kunit_resource *res, *found = NULL;
+	unsigned long flags;
 
-	spin_lock(&test->lock);
+	spin_lock_irqsave(&test->lock, flags);
 
 	list_for_each_entry_reverse(res, &test->resources, node) {
 		if (match(test, res, (void *)match_data)) {
@@ -526,7 +527,7 @@ kunit_find_resource(struct kunit *test,
 		}
 	}
 
-	spin_unlock(&test->lock);
+	spin_unlock_irqrestore(&test->lock, flags);
 
 	return found;
 }
lib/kunit/test.c +11 -7
index ec9494e914ef..2c62eeb45b82 100644
@@ -442,6 +442,7 @@ int kunit_add_resource(struct kunit *test,
 		       void *data)
 {
 	int ret = 0;
+	unsigned long flags;
 
 	res->free = free;
 	kref_init(&res->refcount);
@@ -454,10 +455,10 @@ int kunit_add_resource(struct kunit *test,
 		res->data = data;
 	}
 
-	spin_lock(&test->lock);
+	spin_lock_irqsave(&test->lock, flags);
 	list_add_tail(&res->node, &test->resources);
 	/* refcount for list is established by kref_init() */
-	spin_unlock(&test->lock);
+	spin_unlock_irqrestore(&test->lock, flags);
 
 	return ret;
 }
@@ -515,9 +516,11 @@ EXPORT_SYMBOL_GPL(kunit_alloc_and_get_resource);
 
 void kunit_remove_resource(struct kunit *test, struct kunit_resource *res)
 {
-	spin_lock(&test->lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&test->lock, flags);
 	list_del(&res->node);
-	spin_unlock(&test->lock);
+	spin_unlock_irqrestore(&test->lock, flags);
 	kunit_put_resource(res);
 }
 EXPORT_SYMBOL_GPL(kunit_remove_resource);
@@ -597,6 +600,7 @@ EXPORT_SYMBOL_GPL(kunit_kfree);
 void kunit_cleanup(struct kunit *test)
 {
 	struct kunit_resource *res;
+	unsigned long flags;
 
 	/*
 	 * test->resources is a stack - each allocation must be freed in the
@@ -608,9 +612,9 @@ void kunit_cleanup(struct kunit *test)
 	 * protect against the current node being deleted, not the next.
 	 */
 	while (true) {
-		spin_lock(&test->lock);
+		spin_lock_irqsave(&test->lock, flags);
 		if (list_empty(&test->resources)) {
-			spin_unlock(&test->lock);
+			spin_unlock_irqrestore(&test->lock, flags);
 			break;
 		}
 		res = list_last_entry(&test->resources,
@@ -621,7 +625,7 @@ void kunit_cleanup(struct kunit *test)
 		 * resource, and this can't happen if the test->lock
 		 * is held.
 		 */
-		spin_unlock(&test->lock);
+		spin_unlock_irqrestore(&test->lock, flags);
 		kunit_remove_resource(test, res);
 	}
 #if (IS_ENABLED(CONFIG_KASAN) && IS_ENABLED(CONFIG_KUNIT))
Signature · 1 line
2.31.1.272.g89b43f80a5
#1 lore raw

PATCH v4 2/3 mm/slub, kunit: add a KUnit test for SLUB debugging functionality

From: Oliver Glitta <[email protected]>

SLUB has resiliency_test() function which is hidden behind #ifdef SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody runs it. KUnit should be a proper replacement for it.

Try changing byte in redzone after allocation and changing pointer to next free node, first byte, 50th byte and redzone byte. Check if validation finds errors.

There are several differences from the original resiliency test:
Tests create own caches with known state instead of corrupting shared kmalloc caches.

The corruption of freepointer uses correct offset, the original resiliency test got broken with freepointer changes.

Scratch changing random byte test, because it does not have meaning in this form where we need deterministic results.

Add new option CONFIG_SLUB_KUNIT_TEST in Kconfig.
Because the test deliberatly modifies non-allocated objects, it depends on !KASAN which would have otherwise prevented that.

Use kunit_resource to count errors in cache and silence bug reports. Count error whenever slab_bug() or slab_fix() is called or when the count of pages is wrong.

---
Changes since v3

Use kunit_resource to silence bug reports and count errors suggested by Marco Elver.
Make the test depends on !KASAN thanks to report from the kernel test robot.

Changes since v2

Use bit operation & instead of logical && as reported by kernel test robot and Dan Carpenter

Changes since v1

Conversion from kselftest to KUnit test suggested by Marco Elver. Error silencing.
Error counting improvements.

 lib/Kconfig.debug |  12 ++++
 lib/Makefile      |   1 +
 lib/slub_kunit.c  | 150 ++++++++++++++++++++++++++++++++++++++++++++++
 mm/slab.h         |   1 +
 mm/slub.c         |  50 ++++++++++++++--
 5 files changed, 209 insertions(+), 5 deletions(-)
 create mode 100644 lib/slub_kunit.c
lib/Kconfig.debug +12 -0
index 2779c29d9981..9b8a0d754278 100644
@@ -2371,6 +2371,18 @@ config BITS_TEST
 
 	  If unsure, say N.
 
+config SLUB_KUNIT_TEST
+	tristate "KUnit test for SLUB cache error detection" if !KUNIT_ALL_TESTS
+	depends on SLUB_DEBUG && KUNIT && !KASAN
+	default KUNIT_ALL_TESTS
+	help
+	  This builds SLUB allocator unit test.
+	  Tests SLUB cache debugging functionality.
+	  For more information on KUnit and unit tests in general please refer
+	  to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+	  If unsure, say N.
+
 config TEST_UDELAY
 	tristate "udelay test driver"
 	help
lib/Makefile +1 -0
index b5307d3eec1a..1e59c6714ed8 100644
@@ -352,5 +352,6 @@ obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o
 obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o
 obj-$(CONFIG_BITS_TEST) += test_bits.o
 obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o
+obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o
 
 obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o
lib/slub_kunit.c new file +150 -0

150 lines not on this page · raw message

mm/slab.h +1 -0
index 076582f58f68..95cf42eb8396 100644
@@ -215,6 +215,7 @@ DECLARE_STATIC_KEY_TRUE(slub_debug_enabled);
 DECLARE_STATIC_KEY_FALSE(slub_debug_enabled);
 #endif
 extern void print_tracking(struct kmem_cache *s, void *object);
+long validate_slab_cache(struct kmem_cache *s);
 #else
 static inline void print_tracking(struct kmem_cache *s, void *object)
 {
mm/slub.c +45 -5

118 lines not on this page · raw message

Signature · 1 line
2.31.1.272.g89b43f80a5
Reviewed-by on v4 2/3
#2 lore raw

Re: [PATCH v4 2/3] mm/slub, kunit: add a KUnit test for SLUB debugging functionality

Quoted 17 lines · On Tue, 13 Apr 2021 at 12:07, <[email protected]> wrote:

From: Oliver Glitta <[email protected]>

SLUB has resiliency_test() function which is hidden behind #ifdef SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody runs it. KUnit should be a proper replacement for it.

Try changing byte in redzone after allocation and changing pointer to next free node, first byte, 50th byte and redzone byte. Check if validation finds errors.

There are several differences from the original resiliency test:
Tests create own caches with known state instead of corrupting shared kmalloc caches.

The corruption of freepointer uses correct offset, the original resiliency test got broken with freepointer changes.

Quoted 6 lines

Scratch changing random byte test, because it does not have meaning in this form where we need deterministic results.

Add new option CONFIG_SLUB_KUNIT_TEST in Kconfig.
Because the test deliberatly modifies non-allocated objects, it depends on !KASAN which would have otherwise prevented that.

Hmm, did the test fail with KASAN? Is it possible to skip the tests and still run a subset of tests with KASAN? It'd be nice if we could run some of these tests with KASAN as well.

Quoted 5 lines

Use kunit_resource to count errors in cache and silence bug reports. Count error whenever slab_bug() or slab_fix() is called or when the count of pages is wrong.

Thanks, this all looks good to me. But perhaps do test what works with KASAN, to see if you need the !KASAN constraint for all cases.

Quoted 175 lines

---
Changes since v3

Use kunit_resource to silence bug reports and count errors suggested by Marco Elver.
Make the test depends on !KASAN thanks to report from the kernel test robot.

Changes since v2

Use bit operation & instead of logical && as reported by kernel test robot and Dan Carpenter

Changes since v1

Conversion from kselftest to KUnit test suggested by Marco Elver. Error silencing.
Error counting improvements.

 lib/Kconfig.debug |  12 ++++
 lib/Makefile      |   1 +
 lib/slub_kunit.c  | 150 ++++++++++++++++++++++++++++++++++++++++++++++
 mm/slab.h         |   1 +
 mm/slub.c         |  50 ++++++++++++++--
 5 files changed, 209 insertions(+), 5 deletions(-)
 create mode 100644 lib/slub_kunit.c
lib/Kconfig.debug +12 -0
index 2779c29d9981..9b8a0d754278 100644
@@ -2371,6 +2371,18 @@ config BITS_TEST
 
          If unsure, say N.
 
+config SLUB_KUNIT_TEST
+       tristate "KUnit test for SLUB cache error detection" if !KUNIT_ALL_TESTS
+       depends on SLUB_DEBUG && KUNIT && !KASAN
+       default KUNIT_ALL_TESTS
+       help
+         This builds SLUB allocator unit test.
+         Tests SLUB cache debugging functionality.
+         For more information on KUnit and unit tests in general please refer
+         to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+         If unsure, say N.
+
 config TEST_UDELAY
        tristate "udelay test driver"
        help
lib/Makefile +1 -0
index b5307d3eec1a..1e59c6714ed8 100644
@@ -352,5 +352,6 @@ obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o
 obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o
 obj-$(CONFIG_BITS_TEST) += test_bits.o
 obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o
+obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o
 
 obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o
lib/slub_kunit.c new file +110 -0
new file mode 100644
index 000000000000..cb9ae9f7e8a6
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <kunit/test.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include "../mm/slab.h"
+
+static struct kunit_resource resource;
+static int slab_errors;
+
+static void test_clobber_zone(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_RZ_alloc", 64, 0,
+                               SLAB_RED_ZONE, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       p[64] = 0x12;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+       kmem_cache_free(s, p);
+       kmem_cache_destroy(s);
+}
+
+static void test_next_pointer(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_next_ptr_free", 64, 0,
+                               SLAB_POISON, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+       unsigned long tmp;
+       unsigned long *ptr_addr;
+
+       kmem_cache_free(s, p);
+
+       ptr_addr = (unsigned long *)(p + s->offset);
+       tmp = *ptr_addr;
+       p[s->offset] = 0x12;
+
+       /*
+        * Expecting three errors.
+        * One for the corrupted freechain and the other one for the wrong
+        * count of objects in use. The third error is fixing broken cache.
+        */
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 3, slab_errors);
+
+       /*
+        * Try to repair corrupted freepointer.
+        * Still expecting two errors. The first for the wrong count
+        * of objects in use.
+        * The second error is for fixing broken cache.
+        */
+       *ptr_addr = tmp;
+       slab_errors = 0;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+       /*
+        * Previous validation repaired the count of objects in use.
+        * Now expecting no error.
+        */
+       slab_errors = 0;
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 0, slab_errors);
+
+       kmem_cache_destroy(s);
+}
+
+static void test_first_word(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_1th_word_free", 64, 0,
+                               SLAB_POISON, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       kmem_cache_free(s, p);
+       *p = 0x78;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+       kmem_cache_destroy(s);
+}
+
+static void test_clobber_50th_byte(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_50th_word_free", 64, 0,
+                               SLAB_POISON, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       kmem_cache_free(s, p);
+       p[50] = 0x9a;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+       kmem_cache_destroy(s);
+}
+
+static void test_clobber_redzone_free(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_RZ_free", 64, 0,
+                               SLAB_RED_ZONE, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       kmem_cache_free(s, p);
+       p[64] = 0xab;
+
+       validate_slab_cache(s);

lib/slub_kunit.c line 120

Quoted 10 lines
lib/slub_kunit.c new file +10 -0
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+       kmem_cache_destroy(s);
+}
+
+static int test_init(struct kunit *test)
+{
+       slab_errors = 0;
+
+       /* FIXME: remove when CONFIG_KASAN requirement is dropped. */
+       current->kunit_test = test;

Note, the patch "kunit: support failure from dynamic analysis tools" is already in -next. It's probably safe to leave this, and send a follow-up patch later once that kunit patch is in mainline.

Quoted 175 lines
lib/slub_kunit.c new file +29 -0
+       kunit_add_named_resource(test, NULL, NULL, &resource,
+                                       "slab_errors", &slab_errors);
+       return 0;
+}
+
+static void test_exit(struct kunit *test)
+{
+       /* FIXME: remove when CONFIG_KASAN requirement is dropped. */
+       current->kunit_test = NULL;
+}
+
+static struct kunit_case test_cases[] = {
+       KUNIT_CASE(test_clobber_zone),
+       KUNIT_CASE(test_next_pointer),
+       KUNIT_CASE(test_first_word),
+       KUNIT_CASE(test_clobber_50th_byte),
+       KUNIT_CASE(test_clobber_redzone_free),
+       {}
+};
+
+static struct kunit_suite test_suite = {
+       .name = "slub_test",
+       .init = test_init,
+       .exit = test_exit,
+       .test_cases = test_cases,
+};
+kunit_test_suite(test_suite);
+
+MODULE_LICENSE("GPL");
mm/slab.h +1 -0
index 076582f58f68..95cf42eb8396 100644
@@ -215,6 +215,7 @@ DECLARE_STATIC_KEY_TRUE(slub_debug_enabled);
 DECLARE_STATIC_KEY_FALSE(slub_debug_enabled);
 #endif
 extern void print_tracking(struct kmem_cache *s, void *object);
+long validate_slab_cache(struct kmem_cache *s);
 #else
 static inline void print_tracking(struct kmem_cache *s, void *object)
 {
mm/slub.c +45 -6
index 3021ce9bf1b3..d7df8841d90a 100644
@@ -35,6 +35,7 @@
 #include <linux/prefetch.h>
 #include <linux/memcontrol.h>
 #include <linux/random.h>
+#include <kunit/test.h>
 
 #include <trace/events/kmem.h>
 
@@ -447,6 +448,26 @@ static inline bool cmpxchg_double_slab(struct kmem_cache *s, struct page *page,
 static unsigned long object_map[BITS_TO_LONGS(MAX_OBJS_PER_PAGE)];
 static DEFINE_SPINLOCK(object_map_lock);
 
+#if IS_ENABLED(CONFIG_KUNIT)
+static bool slab_add_kunit_errors(void)
+{
+       struct kunit_resource *resource;
+
+       if (likely(!current->kunit_test))
+               return false;
+
+       resource = kunit_find_named_resource(current->kunit_test, "slab_errors");
+       if (!resource)
+               return false;
+
+       (*(int *)resource->data)++;
+       kunit_put_resource(resource);
+       return true;
+}
+#else
+static inline bool slab_add_kunit_errors(void) { return false; }
+#endif
+
 /*
  * Determine a map of object in use on a page.
  *
@@ -676,6 +697,9 @@ static void slab_fix(struct kmem_cache *s, char *fmt, ...)
        struct va_format vaf;
        va_list args;
 
+       if (slab_add_kunit_errors())
+               return;
+
        va_start(args, fmt);
        vaf.fmt = fmt;
        vaf.va = &args;
@@ -739,6 +763,9 @@ static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p)
 void object_err(struct kmem_cache *s, struct page *page,
                        u8 *object, char *reason)
 {
+       if (slab_add_kunit_errors())
+               return;
+
        slab_bug(s, "%s", reason);
        print_trailer(s, page, object);
 }
@@ -749,6 +776,9 @@ static __printf(3, 4) void slab_err(struct kmem_cache *s, struct page *page,
        va_list args;
        char buf[100];
 
+       if (slab_add_kunit_errors())
+               return;
+
        va_start(args, fmt);
        vsnprintf(buf, sizeof(buf), fmt, args);
        va_end(args);
@@ -798,12 +828,16 @@ static int check_bytes_and_report(struct kmem_cache *s, struct page *page,
        while (end > fault && end[-1] == value)
                end--;
 
+       if (slab_add_kunit_errors())
+               goto skip_bug_print;
+
        slab_bug(s, "%s overwritten", what);
        pr_err("INFO: 0x%p-0x%p @offset=%tu. First byte 0x%x instead of 0x%x\n",
-                                       fault, end - 1, fault - addr,
-                                       fault[0], value);
+                               fault, end - 1, fault - addr,
+                               fault[0], value);
        print_trailer(s, page, object);
 
+skip_bug_print:
        restore_bytes(s, what, value, fault, end);
        return 0;
 }
@@ -4650,9 +4684,11 @@ static int validate_slab_node(struct kmem_cache *s,
                validate_slab(s, page);
                count++;
        }
-       if (count != n->nr_partial)
+       if (count != n->nr_partial) {
                pr_err("SLUB %s: %ld partial slabs counted but counter=%ld\n",
                       s->name, count, n->nr_partial);
+               slab_add_kunit_errors();
+       }
 
        if (!(s->flags & SLAB_STORE_USER))
                goto out;
@@ -4661,16 +4697,18 @@ static int validate_slab_node(struct kmem_cache *s,
                validate_slab(s, page);
                count++;
        }
-       if (count != atomic_long_read(&n->nr_slabs))
+       if (count != atomic_long_read(&n->nr_slabs)) {
                pr_err("SLUB: %s %ld slabs counted but counter=%ld\n",
                       s->name, count, atomic_long_read(&n->nr_slabs));
+               slab_add_kunit_errors();
+       }
 
 out:
        spin_unlock_irqrestore(&n->list_lock, flags);
        return count;
 }
 
-static long validate_slab_cache(struct kmem_cache *s)
+long validate_slab_cache(struct kmem_cache *s)
 {
        int node;
        unsigned long count = 0;
@@ -4682,6 +4720,8 @@ static long validate_slab_cache(struct kmem_cache *s)
 
        return count;
 }
+EXPORT_SYMBOL(validate_slab_cache);
+
 /*
  * Generate lists of code addresses where slabcache objects are allocated
  * and freed.
--

2.31.1.272.g89b43f80a5

#3 lore raw

Re: [PATCH v4 2/3] mm/slub, kunit: add a KUnit test for SLUB debugging functionality

ut 13. 4. 2021 o 15:54 Marco Elver <[email protected]> napísal(a):

Quoted 30 lines · On Tue, 13 Apr 2021 at 12:07, <[email protected]> wrote:
Quoted 17 lines

From: Oliver Glitta <[email protected]>

SLUB has resiliency_test() function which is hidden behind #ifdef SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody runs it. KUnit should be a proper replacement for it.

Try changing byte in redzone after allocation and changing pointer to next free node, first byte, 50th byte and redzone byte. Check if validation finds errors.

There are several differences from the original resiliency test:
Tests create own caches with known state instead of corrupting shared kmalloc caches.

The corruption of freepointer uses correct offset, the original resiliency test got broken with freepointer changes.

Quoted 6 lines

Scratch changing random byte test, because it does not have meaning in this form where we need deterministic results.

Add new option CONFIG_SLUB_KUNIT_TEST in Kconfig.
Because the test deliberatly modifies non-allocated objects, it depends on !KASAN which would have otherwise prevented that.

Hmm, did the test fail with KASAN? Is it possible to skip the tests and still run a subset of tests with KASAN? It'd be nice if we could run some of these tests with KASAN as well.

Quoted 8 lines
Quoted 5 lines

Use kunit_resource to count errors in cache and silence bug reports. Count error whenever slab_bug() or slab_fix() is called or when the count of pages is wrong.

Thank you.

Quoted 2 lines

Thanks, this all looks good to me. But perhaps do test what works with KASAN, to see if you need the !KASAN constraint for all cases.

I tried to run tests with KASAN functionality disabled with function kasan_disable_current() and three of the tests failed with wrong errors counts.
So I add the !KASAN constraint for all tests, because the merge window is coming, we want to know if this version is stable and without other mistakes.
We will take a closer look at that in the follow-up patch.

Quoted 366 lines
Quoted 176 lines

---
Changes since v3

Use kunit_resource to silence bug reports and count errors suggested by Marco Elver.
Make the test depends on !KASAN thanks to report from the kernel test robot.

Changes since v2

Use bit operation & instead of logical && as reported by kernel test robot and Dan Carpenter

Changes since v1

Conversion from kselftest to KUnit test suggested by Marco Elver. Error silencing.
Error counting improvements.

 lib/Kconfig.debug |  12 ++++
 lib/Makefile      |   1 +
 lib/slub_kunit.c  | 150 ++++++++++++++++++++++++++++++++++++++++++++++
 mm/slab.h         |   1 +
 mm/slub.c         |  50 ++++++++++++++--
 5 files changed, 209 insertions(+), 5 deletions(-)
 create mode 100644 lib/slub_kunit.c
lib/Kconfig.debug +12 -0
index 2779c29d9981..9b8a0d754278 100644
@@ -2371,6 +2371,18 @@ config BITS_TEST
 
          If unsure, say N.
 
+config SLUB_KUNIT_TEST
+       tristate "KUnit test for SLUB cache error detection" if !KUNIT_ALL_TESTS
+       depends on SLUB_DEBUG && KUNIT && !KASAN
+       default KUNIT_ALL_TESTS
+       help
+         This builds SLUB allocator unit test.
+         Tests SLUB cache debugging functionality.
+         For more information on KUnit and unit tests in general please refer
+         to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+         If unsure, say N.
+
 config TEST_UDELAY
        tristate "udelay test driver"
        help
lib/Makefile +1 -0
index b5307d3eec1a..1e59c6714ed8 100644
@@ -352,5 +352,6 @@ obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o
 obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o
 obj-$(CONFIG_BITS_TEST) += test_bits.o
 obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o
+obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o
 
 obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o
lib/slub_kunit.c new file +110 -0
new file mode 100644
index 000000000000..cb9ae9f7e8a6
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <kunit/test.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include "../mm/slab.h"
+
+static struct kunit_resource resource;
+static int slab_errors;
+
+static void test_clobber_zone(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_RZ_alloc", 64, 0,
+                               SLAB_RED_ZONE, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       p[64] = 0x12;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+       kmem_cache_free(s, p);
+       kmem_cache_destroy(s);
+}
+
+static void test_next_pointer(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_next_ptr_free", 64, 0,
+                               SLAB_POISON, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+       unsigned long tmp;
+       unsigned long *ptr_addr;
+
+       kmem_cache_free(s, p);
+
+       ptr_addr = (unsigned long *)(p + s->offset);
+       tmp = *ptr_addr;
+       p[s->offset] = 0x12;
+
+       /*
+        * Expecting three errors.
+        * One for the corrupted freechain and the other one for the wrong
+        * count of objects in use. The third error is fixing broken cache.
+        */
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 3, slab_errors);
+
+       /*
+        * Try to repair corrupted freepointer.
+        * Still expecting two errors. The first for the wrong count
+        * of objects in use.
+        * The second error is for fixing broken cache.
+        */
+       *ptr_addr = tmp;
+       slab_errors = 0;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+       /*
+        * Previous validation repaired the count of objects in use.
+        * Now expecting no error.
+        */
+       slab_errors = 0;
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 0, slab_errors);
+
+       kmem_cache_destroy(s);
+}
+
+static void test_first_word(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_1th_word_free", 64, 0,
+                               SLAB_POISON, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       kmem_cache_free(s, p);
+       *p = 0x78;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+       kmem_cache_destroy(s);
+}
+
+static void test_clobber_50th_byte(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_50th_word_free", 64, 0,
+                               SLAB_POISON, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       kmem_cache_free(s, p);
+       p[50] = 0x9a;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+       kmem_cache_destroy(s);
+}
+
+static void test_clobber_redzone_free(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_RZ_free", 64, 0,
+                               SLAB_RED_ZONE, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       kmem_cache_free(s, p);
+       p[64] = 0xab;
+
+       validate_slab_cache(s);

lib/slub_kunit.c line 120

Quoted 10 lines
lib/slub_kunit.c new file +10 -0
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+       kmem_cache_destroy(s);
+}
+
+static int test_init(struct kunit *test)
+{
+       slab_errors = 0;
+
+       /* FIXME: remove when CONFIG_KASAN requirement is dropped. */
+       current->kunit_test = test;

Note, the patch "kunit: support failure from dynamic analysis tools" is already in -next. It's probably safe to leave this, and send a follow-up patch later once that kunit patch is in mainline.

Quoted 175 lines
lib/slub_kunit.c new file +29 -0
+       kunit_add_named_resource(test, NULL, NULL, &resource,
+                                       "slab_errors", &slab_errors);
+       return 0;
+}
+
+static void test_exit(struct kunit *test)
+{
+       /* FIXME: remove when CONFIG_KASAN requirement is dropped. */
+       current->kunit_test = NULL;
+}
+
+static struct kunit_case test_cases[] = {
+       KUNIT_CASE(test_clobber_zone),
+       KUNIT_CASE(test_next_pointer),
+       KUNIT_CASE(test_first_word),
+       KUNIT_CASE(test_clobber_50th_byte),
+       KUNIT_CASE(test_clobber_redzone_free),
+       {}
+};
+
+static struct kunit_suite test_suite = {
+       .name = "slub_test",
+       .init = test_init,
+       .exit = test_exit,
+       .test_cases = test_cases,
+};
+kunit_test_suite(test_suite);
+
+MODULE_LICENSE("GPL");
mm/slab.h +1 -0
index 076582f58f68..95cf42eb8396 100644
@@ -215,6 +215,7 @@ DECLARE_STATIC_KEY_TRUE(slub_debug_enabled);
 DECLARE_STATIC_KEY_FALSE(slub_debug_enabled);
 #endif
 extern void print_tracking(struct kmem_cache *s, void *object);
+long validate_slab_cache(struct kmem_cache *s);
 #else
 static inline void print_tracking(struct kmem_cache *s, void *object)
 {
mm/slub.c +45 -6
index 3021ce9bf1b3..d7df8841d90a 100644
@@ -35,6 +35,7 @@
 #include <linux/prefetch.h>
 #include <linux/memcontrol.h>
 #include <linux/random.h>
+#include <kunit/test.h>
 
 #include <trace/events/kmem.h>
 
@@ -447,6 +448,26 @@ static inline bool cmpxchg_double_slab(struct kmem_cache *s, struct page *page,
 static unsigned long object_map[BITS_TO_LONGS(MAX_OBJS_PER_PAGE)];
 static DEFINE_SPINLOCK(object_map_lock);
 
+#if IS_ENABLED(CONFIG_KUNIT)
+static bool slab_add_kunit_errors(void)
+{
+       struct kunit_resource *resource;
+
+       if (likely(!current->kunit_test))
+               return false;
+
+       resource = kunit_find_named_resource(current->kunit_test, "slab_errors");
+       if (!resource)
+               return false;
+
+       (*(int *)resource->data)++;
+       kunit_put_resource(resource);
+       return true;
+}
+#else
+static inline bool slab_add_kunit_errors(void) { return false; }
+#endif
+
 /*
  * Determine a map of object in use on a page.
  *
@@ -676,6 +697,9 @@ static void slab_fix(struct kmem_cache *s, char *fmt, ...)
        struct va_format vaf;
        va_list args;
 
+       if (slab_add_kunit_errors())
+               return;
+
        va_start(args, fmt);
        vaf.fmt = fmt;
        vaf.va = &args;
@@ -739,6 +763,9 @@ static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p)
 void object_err(struct kmem_cache *s, struct page *page,
                        u8 *object, char *reason)
 {
+       if (slab_add_kunit_errors())
+               return;
+
        slab_bug(s, "%s", reason);
        print_trailer(s, page, object);
 }
@@ -749,6 +776,9 @@ static __printf(3, 4) void slab_err(struct kmem_cache *s, struct page *page,
        va_list args;
        char buf[100];
 
+       if (slab_add_kunit_errors())
+               return;
+
        va_start(args, fmt);
        vsnprintf(buf, sizeof(buf), fmt, args);
        va_end(args);
@@ -798,12 +828,16 @@ static int check_bytes_and_report(struct kmem_cache *s, struct page *page,
        while (end > fault && end[-1] == value)
                end--;
 
+       if (slab_add_kunit_errors())
+               goto skip_bug_print;
+
        slab_bug(s, "%s overwritten", what);
        pr_err("INFO: 0x%p-0x%p @offset=%tu. First byte 0x%x instead of 0x%x\n",
-                                       fault, end - 1, fault - addr,
-                                       fault[0], value);
+                               fault, end - 1, fault - addr,
+                               fault[0], value);
        print_trailer(s, page, object);
 
+skip_bug_print:
        restore_bytes(s, what, value, fault, end);
        return 0;
 }
@@ -4650,9 +4684,11 @@ static int validate_slab_node(struct kmem_cache *s,
                validate_slab(s, page);
                count++;
        }
-       if (count != n->nr_partial)
+       if (count != n->nr_partial) {
                pr_err("SLUB %s: %ld partial slabs counted but counter=%ld\n",
                       s->name, count, n->nr_partial);
+               slab_add_kunit_errors();
+       }
 
        if (!(s->flags & SLAB_STORE_USER))
                goto out;
@@ -4661,16 +4697,18 @@ static int validate_slab_node(struct kmem_cache *s,
                validate_slab(s, page);
                count++;
        }
-       if (count != atomic_long_read(&n->nr_slabs))
+       if (count != atomic_long_read(&n->nr_slabs)) {
                pr_err("SLUB: %s %ld slabs counted but counter=%ld\n",
                       s->name, count, atomic_long_read(&n->nr_slabs));
+               slab_add_kunit_errors();
+       }
 
 out:
        spin_unlock_irqrestore(&n->list_lock, flags);
        return count;
 }
 
-static long validate_slab_cache(struct kmem_cache *s)
+long validate_slab_cache(struct kmem_cache *s)
 {
        int node;
        unsigned long count = 0;
@@ -4682,6 +4720,8 @@ static long validate_slab_cache(struct kmem_cache *s)
 
        return count;
 }
+EXPORT_SYMBOL(validate_slab_cache);
+
 /*
  * Generate lists of code addresses where slabcache objects are allocated
  * and freed.
--

2.31.1.272.g89b43f80a5

#4 lore raw

Re: [PATCH v4 2/3] mm/slub, kunit: add a KUnit test for SLUB debugging functionality

Quoted 45 lines · Oliver Glitta

ut 13. 4. 2021 o 15:54 Marco Elver <[email protected]> napísal(a):

Quoted 30 lines · On Tue, 13 Apr 2021 at 12:07, <[email protected]> wrote:
Quoted 17 lines

From: Oliver Glitta <[email protected]>

SLUB has resiliency_test() function which is hidden behind #ifdef SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody runs it. KUnit should be a proper replacement for it.

Try changing byte in redzone after allocation and changing pointer to next free node, first byte, 50th byte and redzone byte. Check if validation finds errors.

There are several differences from the original resiliency test:
Tests create own caches with known state instead of corrupting shared kmalloc caches.

The corruption of freepointer uses correct offset, the original resiliency test got broken with freepointer changes.

Quoted 6 lines

Scratch changing random byte test, because it does not have meaning in this form where we need deterministic results.

Add new option CONFIG_SLUB_KUNIT_TEST in Kconfig.
Because the test deliberatly modifies non-allocated objects, it depends on !KASAN which would have otherwise prevented that.

Hmm, did the test fail with KASAN? Is it possible to skip the tests and still run a subset of tests with KASAN? It'd be nice if we could run some of these tests with KASAN as well.

Quoted 8 lines
Quoted 5 lines

Use kunit_resource to count errors in cache and silence bug reports. Count error whenever slab_bug() or slab_fix() is called or when the count of pages is wrong.

Thank you.

Quoted 2 lines

Thanks, this all looks good to me. But perhaps do test what works with KASAN, to see if you need the !KASAN constraint for all cases.

Quoted 7 lines

I tried to run tests with KASAN functionality disabled with function kasan_disable_current() and three of the tests failed with wrong errors counts.
So I add the !KASAN constraint for all tests, because the merge window is coming, we want to know if this version is stable and without other mistakes.
We will take a closer look at that in the follow-up patch.

Agreed. In this context, KASAN is essentially a different implementation of the same checks that SLUB_DEBUG offers (and also does other checks) and we excercise these SLUB_DEBUG checks by deliberately causing the corruption that they detect
- so instead, KASAN detects it, as it should. I assume that once somebody opts for a full KASAN kernel build, they don't need the SLUB_DEBUG functionality at that point, as KASAN is more extensive (On the other hand SLUB_DEBUG kernels can be (and are) shipped as production distro kernels where specific targetted debugging can be enabled to help find bugs in production with minimal disruption). So trying to make both cooperate can work only to some extent and for now we've chosen the safer way.

#5 lore raw

Re: [PATCH v4 2/3] mm/slub, kunit: add a KUnit test for SLUB debugging functionality

Quoted 55 lines · Vlastimil Babka
Quoted 45 lines · Oliver Glitta

ut 13. 4. 2021 o 15:54 Marco Elver <[email protected]> napísal(a):

Quoted 30 lines · On Tue, 13 Apr 2021 at 12:07, <[email protected]> wrote:
Quoted 17 lines

From: Oliver Glitta <[email protected]>

SLUB has resiliency_test() function which is hidden behind #ifdef SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody runs it. KUnit should be a proper replacement for it.

Try changing byte in redzone after allocation and changing pointer to next free node, first byte, 50th byte and redzone byte. Check if validation finds errors.

There are several differences from the original resiliency test:
Tests create own caches with known state instead of corrupting shared kmalloc caches.

The corruption of freepointer uses correct offset, the original resiliency test got broken with freepointer changes.

Quoted 6 lines

Scratch changing random byte test, because it does not have meaning in this form where we need deterministic results.

Add new option CONFIG_SLUB_KUNIT_TEST in Kconfig.
Because the test deliberatly modifies non-allocated objects, it depends on !KASAN which would have otherwise prevented that.

Hmm, did the test fail with KASAN? Is it possible to skip the tests and still run a subset of tests with KASAN? It'd be nice if we could run some of these tests with KASAN as well.

Quoted 8 lines
Quoted 5 lines

Use kunit_resource to count errors in cache and silence bug reports. Count error whenever slab_bug() or slab_fix() is called or when the count of pages is wrong.

Thank you.

Quoted 2 lines

Thanks, this all looks good to me. But perhaps do test what works with KASAN, to see if you need the !KASAN constraint for all cases.

Quoted 7 lines

I tried to run tests with KASAN functionality disabled with function kasan_disable_current() and three of the tests failed with wrong errors counts.
So I add the !KASAN constraint for all tests, because the merge window is coming, we want to know if this version is stable and without other mistakes.
We will take a closer look at that in the follow-up patch.

Quoted 10 lines

Agreed. In this context, KASAN is essentially a different implementation of the same checks that SLUB_DEBUG offers (and also does other checks) and we excercise these SLUB_DEBUG checks by deliberately causing the corruption that they detect
- so instead, KASAN detects it, as it should. I assume that once somebody opts for a full KASAN kernel build, they don't need the SLUB_DEBUG functionality at that point, as KASAN is more extensive (On the other hand SLUB_DEBUG kernels can be (and are) shipped as production distro kernels where specific targetted debugging can be enabled to help find bugs in production with minimal disruption). So trying to make both cooperate can work only to some extent and for now we've chosen the safer way.

Sounds reasonable. In any case, I'm fine with this version to land and my Reviewed-by above remains valid. :-)

Thanks,
-- Marco

Acked-by on v4 2/3
#6 lore raw

Re: [PATCH v4 2/3] mm/slub, kunit: add a KUnit test for SLUB debugging functionality

In reply to [email protected]
Quoted 15 lines · On Tue, Apr 13, 2021 at 3:07 AM <[email protected]> wrote:

From: Oliver Glitta <[email protected]>

SLUB has resiliency_test() function which is hidden behind #ifdef SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody runs it. KUnit should be a proper replacement for it.

Try changing byte in redzone after allocation and changing pointer to next free node, first byte, 50th byte and redzone byte. Check if validation finds errors.

There are several differences from the original resiliency test:
Tests create own caches with known state instead of corrupting shared kmalloc caches.

Quoted 8 lines

The corruption of freepointer uses correct offset, the original resiliency test got broken with freepointer changes.

Scratch changing random byte test, because it does not have meaning in this form where we need deterministic results.

Add new option CONFIG_SLUB_KUNIT_TEST in Kconfig.
Because the test deliberatly modifies non-allocated objects, it depends on

nit: *deliberately

Quoted 7 lines

!KASAN which would have otherwise prevented that.

Use kunit_resource to count errors in cache and silence bug reports. Count error whenever slab_bug() or slab_fix() is called or when the count of pages is wrong.

Looks good to me!
My one minor suggestion: perhaps let's log a summary of the error or the func name in slab_add_kunit_errors().

Quoted 79 lines

---
Changes since v3

Use kunit_resource to silence bug reports and count errors suggested by Marco Elver.
Make the test depends on !KASAN thanks to report from the kernel test robot.

Changes since v2

Use bit operation & instead of logical && as reported by kernel test robot and Dan Carpenter

Changes since v1

Conversion from kselftest to KUnit test suggested by Marco Elver. Error silencing.
Error counting improvements.

 lib/Kconfig.debug |  12 ++++
 lib/Makefile      |   1 +
 lib/slub_kunit.c  | 150 ++++++++++++++++++++++++++++++++++++++++++++++
 mm/slab.h         |   1 +
 mm/slub.c         |  50 ++++++++++++++--
 5 files changed, 209 insertions(+), 5 deletions(-)
 create mode 100644 lib/slub_kunit.c
lib/Kconfig.debug +12 -0
index 2779c29d9981..9b8a0d754278 100644
@@ -2371,6 +2371,18 @@ config BITS_TEST
 
          If unsure, say N.
 
+config SLUB_KUNIT_TEST
+       tristate "KUnit test for SLUB cache error detection" if !KUNIT_ALL_TESTS
+       depends on SLUB_DEBUG && KUNIT && !KASAN
+       default KUNIT_ALL_TESTS
+       help
+         This builds SLUB allocator unit test.
+         Tests SLUB cache debugging functionality.
+         For more information on KUnit and unit tests in general please refer
+         to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+         If unsure, say N.
+
 config TEST_UDELAY
        tristate "udelay test driver"
        help
lib/Makefile +1 -0
index b5307d3eec1a..1e59c6714ed8 100644
@@ -352,5 +352,6 @@ obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o
 obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o
 obj-$(CONFIG_BITS_TEST) += test_bits.o
 obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o
+obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o
 
 obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o
lib/slub_kunit.c new file +14 -0
new file mode 100644
index 000000000000..cb9ae9f7e8a6
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <kunit/test.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include "../mm/slab.h"
+
+static struct kunit_resource resource;
+static int slab_errors;
+
+static void test_clobber_zone(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_RZ_alloc", 64, 0,

lib/slub_kunit.c line 24

Quoted 10 lines
lib/slub_kunit.c new file +10 -0
+                               SLAB_RED_ZONE, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       p[64] = 0x12;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+       kmem_cache_free(s, p);
+       kmem_cache_destroy(s);

Might not be worth doing for now:
I see kmem_cache_destroy() has a if (err) { pr_err(...); dump_stack(); } call. Does it make sense to cause that to fail the test?

I see it's defined in mm/slab_common.c, so we might not want to touch that in this patch.

Quoted 6 lines
lib/slub_kunit.c new file +6 -0
+}
+
+static void test_next_pointer(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_next_ptr_free", 64, 0,
+                               SLAB_POISON, NULL);

lib/slub_kunit.c line 40

Quoted 10 lines
lib/slub_kunit.c new file +10 -0
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+       unsigned long tmp;
+       unsigned long *ptr_addr;
+
+       kmem_cache_free(s, p);
+
+       ptr_addr = (unsigned long *)(p + s->offset);
+       tmp = *ptr_addr;
+       p[s->offset] = 0x12;
+

I really like this test!
I think it'll be a good example to point to wrt handle mutating state in tests (clear comments, using whitespace to break up steps, setting up clear EXPECT calls, etc.)

Quoted 172 lines
lib/slub_kunit.c new file +110 -0
+       /*
+        * Expecting three errors.
+        * One for the corrupted freechain and the other one for the wrong
+        * count of objects in use. The third error is fixing broken cache.
+        */
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 3, slab_errors);
+
+       /*
+        * Try to repair corrupted freepointer.
+        * Still expecting two errors. The first for the wrong count
+        * of objects in use.
+        * The second error is for fixing broken cache.
+        */
+       *ptr_addr = tmp;
+       slab_errors = 0;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+       /*
+        * Previous validation repaired the count of objects in use.
+        * Now expecting no error.
+        */
+       slab_errors = 0;
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 0, slab_errors);
+
+       kmem_cache_destroy(s);
+}
+
+static void test_first_word(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_1th_word_free", 64, 0,
+                               SLAB_POISON, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       kmem_cache_free(s, p);
+       *p = 0x78;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+       kmem_cache_destroy(s);
+}
+
+static void test_clobber_50th_byte(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_50th_word_free", 64, 0,
+                               SLAB_POISON, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       kmem_cache_free(s, p);
+       p[50] = 0x9a;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+       kmem_cache_destroy(s);
+}
+
+static void test_clobber_redzone_free(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_RZ_free", 64, 0,
+                               SLAB_RED_ZONE, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       kmem_cache_free(s, p);
+       p[64] = 0xab;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+       kmem_cache_destroy(s);
+}
+
+static int test_init(struct kunit *test)
+{
+       slab_errors = 0;
+
+       /* FIXME: remove when CONFIG_KASAN requirement is dropped. */
+       current->kunit_test = test;
+
+       kunit_add_named_resource(test, NULL, NULL, &resource,
+                                       "slab_errors", &slab_errors);
+       return 0;
+}
+
+static void test_exit(struct kunit *test)
+{
+       /* FIXME: remove when CONFIG_KASAN requirement is dropped. */
+       current->kunit_test = NULL;
+}
+
+static struct kunit_case test_cases[] = {
+       KUNIT_CASE(test_clobber_zone),
+       KUNIT_CASE(test_next_pointer),
+       KUNIT_CASE(test_first_word),
+       KUNIT_CASE(test_clobber_50th_byte),
+       KUNIT_CASE(test_clobber_redzone_free),
+       {}
+};
+
+static struct kunit_suite test_suite = {
+       .name = "slub_test",
+       .init = test_init,
+       .exit = test_exit,
+       .test_cases = test_cases,
+};
+kunit_test_suite(test_suite);
+
+MODULE_LICENSE("GPL");
mm/slab.h +1 -0
index 076582f58f68..95cf42eb8396 100644
@@ -215,6 +215,7 @@ DECLARE_STATIC_KEY_TRUE(slub_debug_enabled);
 DECLARE_STATIC_KEY_FALSE(slub_debug_enabled);
 #endif
 extern void print_tracking(struct kmem_cache *s, void *object);
+long validate_slab_cache(struct kmem_cache *s);
 #else
 static inline void print_tracking(struct kmem_cache *s, void *object)
 {
mm/slub.c +24 -0
index 3021ce9bf1b3..d7df8841d90a 100644
@@ -35,6 +35,7 @@
 #include <linux/prefetch.h>
 #include <linux/memcontrol.h>
 #include <linux/random.h>
+#include <kunit/test.h>
 
 #include <trace/events/kmem.h>
 
@@ -447,6 +448,26 @@ static inline bool cmpxchg_double_slab(struct kmem_cache *s, struct page *page,
 static unsigned long object_map[BITS_TO_LONGS(MAX_OBJS_PER_PAGE)];
 static DEFINE_SPINLOCK(object_map_lock);
 
+#if IS_ENABLED(CONFIG_KUNIT)
+static bool slab_add_kunit_errors(void)
+{
+       struct kunit_resource *resource;
+
+       if (likely(!current->kunit_test))
+               return false;
+
+       resource = kunit_find_named_resource(current->kunit_test, "slab_errors");
+       if (!resource)
+               return false;
+
+       (*(int *)resource->data)++;
+       kunit_put_resource(resource);
+       return true;
+}
+#else
+static inline bool slab_add_kunit_errors(void) { return false; }
+#endif
+
 /*
  * Determine a map of object in use on a page.
  *
@@ -676,6 +697,9 @@ static void slab_fix(struct kmem_cache *s, char *fmt, ...)
        struct va_format vaf;
        va_list args;
 
+       if (slab_add_kunit_errors())
+               return;
+
        va_start(args, fmt);
        vaf.fmt = fmt;
        vaf.va = &args;

mm/slub.c static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p) · line 769

Quoted 7 lines
mm/slub.c +3 -0
@@ -739,6 +763,9 @@ static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p)
 void object_err(struct kmem_cache *s, struct page *page,
                        u8 *object, char *reason)
 {
+       if (slab_add_kunit_errors())
+               return;
+
        slab_bug(s, "%s", reason);

Would it be a good idea for us to log the error text in slab_add_kunit_errors()? Otherwise we could end up with getting the same error count but from an unexpected set of code paths.

Boils down to using this macro
kunit_info(current->kunit_test, "%s", reason);

Perhaps we could get away with just duplicating (a subset of) what we'd pass into slab_bug(), i.e.
if (slab_add_kunit_errors("%s", reason)) return;
if (slab_add_kunit_errors("%s overwritten", what) return;
If the string we're printing is too annoying to duplicate, can get away with just using __func__ as well.

Or a more messy alternative would be to add some #if'd code in slab_bug(), but I don't know if that's as good of an idea.

Quoted 77 lines
mm/slub.c +18 -6
        print_trailer(s, page, object);
 }
@@ -749,6 +776,9 @@ static __printf(3, 4) void slab_err(struct kmem_cache *s, struct page *page,
        va_list args;
        char buf[100];
 
+       if (slab_add_kunit_errors())
+               return;
+
        va_start(args, fmt);
        vsnprintf(buf, sizeof(buf), fmt, args);
        va_end(args);
@@ -798,12 +828,16 @@ static int check_bytes_and_report(struct kmem_cache *s, struct page *page,
        while (end > fault && end[-1] == value)
                end--;
 
+       if (slab_add_kunit_errors())
+               goto skip_bug_print;
+
        slab_bug(s, "%s overwritten", what);
        pr_err("INFO: 0x%p-0x%p @offset=%tu. First byte 0x%x instead of 0x%x\n",
-                                       fault, end - 1, fault - addr,
-                                       fault[0], value);
+                               fault, end - 1, fault - addr,
+                               fault[0], value);
        print_trailer(s, page, object);
 
+skip_bug_print:
        restore_bytes(s, what, value, fault, end);
        return 0;
 }
@@ -4650,9 +4684,11 @@ static int validate_slab_node(struct kmem_cache *s,
                validate_slab(s, page);
                count++;
        }
-       if (count != n->nr_partial)
+       if (count != n->nr_partial) {
                pr_err("SLUB %s: %ld partial slabs counted but counter=%ld\n",
                       s->name, count, n->nr_partial);
+               slab_add_kunit_errors();
+       }
 
        if (!(s->flags & SLAB_STORE_USER))
                goto out;
@@ -4661,16 +4697,18 @@ static int validate_slab_node(struct kmem_cache *s,
                validate_slab(s, page);
                count++;
        }
-       if (count != atomic_long_read(&n->nr_slabs))
+       if (count != atomic_long_read(&n->nr_slabs)) {
                pr_err("SLUB: %s %ld slabs counted but counter=%ld\n",
                       s->name, count, atomic_long_read(&n->nr_slabs));
+               slab_add_kunit_errors();
+       }
 
 out:
        spin_unlock_irqrestore(&n->list_lock, flags);
        return count;
 }
 
-static long validate_slab_cache(struct kmem_cache *s)
+long validate_slab_cache(struct kmem_cache *s)
 {
        int node;
        unsigned long count = 0;
@@ -4682,6 +4720,8 @@ static long validate_slab_cache(struct kmem_cache *s)
 
        return count;
 }
+EXPORT_SYMBOL(validate_slab_cache);
+
 /*
  * Generate lists of code addresses where slabcache objects are allocated
  * and freed.
--

2.31.1.272.g89b43f80a5

#7 lore raw

Re: [PATCH v4 2/3] mm/slub, kunit: add a KUnit test for SLUB debugging functionality

ut 13. 4. 2021 o 23:33 Daniel Latypov <[email protected]> napísal(a):

Quoted 30 lines · On Tue, Apr 13, 2021 at 3:07 AM <[email protected]> wrote:
Quoted 15 lines

From: Oliver Glitta <[email protected]>

SLUB has resiliency_test() function which is hidden behind #ifdef SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody runs it. KUnit should be a proper replacement for it.

Try changing byte in redzone after allocation and changing pointer to next free node, first byte, 50th byte and redzone byte. Check if validation finds errors.

There are several differences from the original resiliency test:
Tests create own caches with known state instead of corrupting shared kmalloc caches.

Quoted 8 lines

The corruption of freepointer uses correct offset, the original resiliency test got broken with freepointer changes.

Scratch changing random byte test, because it does not have meaning in this form where we need deterministic results.

Add new option CONFIG_SLUB_KUNIT_TEST in Kconfig.
Because the test deliberatly modifies non-allocated objects, it depends on

nit: *deliberately

Quoted 2 lines

!KASAN which would have otherwise prevented that.

Quoted 8 lines
Quoted 5 lines

Use kunit_resource to count errors in cache and silence bug reports. Count error whenever slab_bug() or slab_fix() is called or when the count of pages is wrong.

Thank you.

Quoted 4 lines

Looks good to me!
My one minor suggestion: perhaps let's log a summary of the error or the func name in slab_add_kunit_errors().

That is a good suggestion, but now we want to know if this version is stable. We will take a look at that in the follow-up patch.

Quoted 393 lines
Quoted 79 lines

---
Changes since v3

Use kunit_resource to silence bug reports and count errors suggested by Marco Elver.
Make the test depends on !KASAN thanks to report from the kernel test robot.

Changes since v2

Use bit operation & instead of logical && as reported by kernel test robot and Dan Carpenter

Changes since v1

Conversion from kselftest to KUnit test suggested by Marco Elver. Error silencing.
Error counting improvements.

 lib/Kconfig.debug |  12 ++++
 lib/Makefile      |   1 +
 lib/slub_kunit.c  | 150 ++++++++++++++++++++++++++++++++++++++++++++++
 mm/slab.h         |   1 +
 mm/slub.c         |  50 ++++++++++++++--
 5 files changed, 209 insertions(+), 5 deletions(-)
 create mode 100644 lib/slub_kunit.c
lib/Kconfig.debug +12 -0
index 2779c29d9981..9b8a0d754278 100644
@@ -2371,6 +2371,18 @@ config BITS_TEST
 
          If unsure, say N.
 
+config SLUB_KUNIT_TEST
+       tristate "KUnit test for SLUB cache error detection" if !KUNIT_ALL_TESTS
+       depends on SLUB_DEBUG && KUNIT && !KASAN
+       default KUNIT_ALL_TESTS
+       help
+         This builds SLUB allocator unit test.
+         Tests SLUB cache debugging functionality.
+         For more information on KUnit and unit tests in general please refer
+         to the KUnit documentation in Documentation/dev-tools/kunit/.
+
+         If unsure, say N.
+
 config TEST_UDELAY
        tristate "udelay test driver"
        help
lib/Makefile +1 -0
index b5307d3eec1a..1e59c6714ed8 100644
@@ -352,5 +352,6 @@ obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o
 obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o
 obj-$(CONFIG_BITS_TEST) += test_bits.o
 obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o
+obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o
 
 obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o
lib/slub_kunit.c new file +14 -0
new file mode 100644
index 000000000000..cb9ae9f7e8a6
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <kunit/test.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include "../mm/slab.h"
+
+static struct kunit_resource resource;
+static int slab_errors;
+
+static void test_clobber_zone(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_RZ_alloc", 64, 0,

lib/slub_kunit.c line 24

Quoted 10 lines
lib/slub_kunit.c new file +10 -0
+                               SLAB_RED_ZONE, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       p[64] = 0x12;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+       kmem_cache_free(s, p);
+       kmem_cache_destroy(s);

Might not be worth doing for now:
I see kmem_cache_destroy() has a if (err) { pr_err(...); dump_stack(); } call. Does it make sense to cause that to fail the test?

I see it's defined in mm/slab_common.c, so we might not want to touch that in this patch.

Quoted 6 lines
lib/slub_kunit.c new file +6 -0
+}
+
+static void test_next_pointer(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_next_ptr_free", 64, 0,
+                               SLAB_POISON, NULL);

lib/slub_kunit.c line 40

Quoted 10 lines
lib/slub_kunit.c new file +10 -0
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+       unsigned long tmp;
+       unsigned long *ptr_addr;
+
+       kmem_cache_free(s, p);
+
+       ptr_addr = (unsigned long *)(p + s->offset);
+       tmp = *ptr_addr;
+       p[s->offset] = 0x12;
+

I really like this test!
I think it'll be a good example to point to wrt handle mutating state in tests (clear comments, using whitespace to break up steps, setting up clear EXPECT calls, etc.)

Quoted 172 lines
lib/slub_kunit.c new file +110 -0
+       /*
+        * Expecting three errors.
+        * One for the corrupted freechain and the other one for the wrong
+        * count of objects in use. The third error is fixing broken cache.
+        */
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 3, slab_errors);
+
+       /*
+        * Try to repair corrupted freepointer.
+        * Still expecting two errors. The first for the wrong count
+        * of objects in use.
+        * The second error is for fixing broken cache.
+        */
+       *ptr_addr = tmp;
+       slab_errors = 0;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+       /*
+        * Previous validation repaired the count of objects in use.
+        * Now expecting no error.
+        */
+       slab_errors = 0;
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 0, slab_errors);
+
+       kmem_cache_destroy(s);
+}
+
+static void test_first_word(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_1th_word_free", 64, 0,
+                               SLAB_POISON, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       kmem_cache_free(s, p);
+       *p = 0x78;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+
+       kmem_cache_destroy(s);
+}
+
+static void test_clobber_50th_byte(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_50th_word_free", 64, 0,
+                               SLAB_POISON, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       kmem_cache_free(s, p);
+       p[50] = 0x9a;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+       kmem_cache_destroy(s);
+}
+
+static void test_clobber_redzone_free(struct kunit *test)
+{
+       struct kmem_cache *s = kmem_cache_create("TestSlub_RZ_free", 64, 0,
+                               SLAB_RED_ZONE, NULL);
+       u8 *p = kmem_cache_alloc(s, GFP_KERNEL);
+
+       kmem_cache_free(s, p);
+       p[64] = 0xab;
+
+       validate_slab_cache(s);
+       KUNIT_EXPECT_EQ(test, 2, slab_errors);
+       kmem_cache_destroy(s);
+}
+
+static int test_init(struct kunit *test)
+{
+       slab_errors = 0;
+
+       /* FIXME: remove when CONFIG_KASAN requirement is dropped. */
+       current->kunit_test = test;
+
+       kunit_add_named_resource(test, NULL, NULL, &resource,
+                                       "slab_errors", &slab_errors);
+       return 0;
+}
+
+static void test_exit(struct kunit *test)
+{
+       /* FIXME: remove when CONFIG_KASAN requirement is dropped. */
+       current->kunit_test = NULL;
+}
+
+static struct kunit_case test_cases[] = {
+       KUNIT_CASE(test_clobber_zone),
+       KUNIT_CASE(test_next_pointer),
+       KUNIT_CASE(test_first_word),
+       KUNIT_CASE(test_clobber_50th_byte),
+       KUNIT_CASE(test_clobber_redzone_free),
+       {}
+};
+
+static struct kunit_suite test_suite = {
+       .name = "slub_test",
+       .init = test_init,
+       .exit = test_exit,
+       .test_cases = test_cases,
+};
+kunit_test_suite(test_suite);
+
+MODULE_LICENSE("GPL");
mm/slab.h +1 -0
index 076582f58f68..95cf42eb8396 100644
@@ -215,6 +215,7 @@ DECLARE_STATIC_KEY_TRUE(slub_debug_enabled);
 DECLARE_STATIC_KEY_FALSE(slub_debug_enabled);
 #endif
 extern void print_tracking(struct kmem_cache *s, void *object);
+long validate_slab_cache(struct kmem_cache *s);
 #else
 static inline void print_tracking(struct kmem_cache *s, void *object)
 {
mm/slub.c +24 -0
index 3021ce9bf1b3..d7df8841d90a 100644
@@ -35,6 +35,7 @@
 #include <linux/prefetch.h>
 #include <linux/memcontrol.h>
 #include <linux/random.h>
+#include <kunit/test.h>
 
 #include <trace/events/kmem.h>
 
@@ -447,6 +448,26 @@ static inline bool cmpxchg_double_slab(struct kmem_cache *s, struct page *page,
 static unsigned long object_map[BITS_TO_LONGS(MAX_OBJS_PER_PAGE)];
 static DEFINE_SPINLOCK(object_map_lock);
 
+#if IS_ENABLED(CONFIG_KUNIT)
+static bool slab_add_kunit_errors(void)
+{
+       struct kunit_resource *resource;
+
+       if (likely(!current->kunit_test))
+               return false;
+
+       resource = kunit_find_named_resource(current->kunit_test, "slab_errors");
+       if (!resource)
+               return false;
+
+       (*(int *)resource->data)++;
+       kunit_put_resource(resource);
+       return true;
+}
+#else
+static inline bool slab_add_kunit_errors(void) { return false; }
+#endif
+
 /*
  * Determine a map of object in use on a page.
  *
@@ -676,6 +697,9 @@ static void slab_fix(struct kmem_cache *s, char *fmt, ...)
        struct va_format vaf;
        va_list args;
 
+       if (slab_add_kunit_errors())
+               return;
+
        va_start(args, fmt);
        vaf.fmt = fmt;
        vaf.va = &args;

mm/slub.c static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p) · line 769

Quoted 7 lines
mm/slub.c +3 -0
@@ -739,6 +763,9 @@ static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p)
 void object_err(struct kmem_cache *s, struct page *page,
                        u8 *object, char *reason)
 {
+       if (slab_add_kunit_errors())
+               return;
+
        slab_bug(s, "%s", reason);

Would it be a good idea for us to log the error text in slab_add_kunit_errors()? Otherwise we could end up with getting the same error count but from an unexpected set of code paths.

Boils down to using this macro
kunit_info(current->kunit_test, "%s", reason);

Perhaps we could get away with just duplicating (a subset of) what we'd pass into slab_bug(), i.e.
if (slab_add_kunit_errors("%s", reason)) return;
if (slab_add_kunit_errors("%s overwritten", what) return;
If the string we're printing is too annoying to duplicate, can get away with just using __func__ as well.

Or a more messy alternative would be to add some #if'd code in slab_bug(), but I don't know if that's as good of an idea.

Quoted 77 lines
mm/slub.c +18 -6
        print_trailer(s, page, object);
 }
@@ -749,6 +776,9 @@ static __printf(3, 4) void slab_err(struct kmem_cache *s, struct page *page,
        va_list args;
        char buf[100];
 
+       if (slab_add_kunit_errors())
+               return;
+
        va_start(args, fmt);
        vsnprintf(buf, sizeof(buf), fmt, args);
        va_end(args);
@@ -798,12 +828,16 @@ static int check_bytes_and_report(struct kmem_cache *s, struct page *page,
        while (end > fault && end[-1] == value)
                end--;
 
+       if (slab_add_kunit_errors())
+               goto skip_bug_print;
+
        slab_bug(s, "%s overwritten", what);
        pr_err("INFO: 0x%p-0x%p @offset=%tu. First byte 0x%x instead of 0x%x\n",
-                                       fault, end - 1, fault - addr,
-                                       fault[0], value);
+                               fault, end - 1, fault - addr,
+                               fault[0], value);
        print_trailer(s, page, object);
 
+skip_bug_print:
        restore_bytes(s, what, value, fault, end);
        return 0;
 }
@@ -4650,9 +4684,11 @@ static int validate_slab_node(struct kmem_cache *s,
                validate_slab(s, page);
                count++;
        }
-       if (count != n->nr_partial)
+       if (count != n->nr_partial) {
                pr_err("SLUB %s: %ld partial slabs counted but counter=%ld\n",
                       s->name, count, n->nr_partial);
+               slab_add_kunit_errors();
+       }
 
        if (!(s->flags & SLAB_STORE_USER))
                goto out;
@@ -4661,16 +4697,18 @@ static int validate_slab_node(struct kmem_cache *s,
                validate_slab(s, page);
                count++;
        }
-       if (count != atomic_long_read(&n->nr_slabs))
+       if (count != atomic_long_read(&n->nr_slabs)) {
                pr_err("SLUB: %s %ld slabs counted but counter=%ld\n",
                       s->name, count, atomic_long_read(&n->nr_slabs));
+               slab_add_kunit_errors();
+       }
 
 out:
        spin_unlock_irqrestore(&n->list_lock, flags);
        return count;
 }
 
-static long validate_slab_cache(struct kmem_cache *s)
+long validate_slab_cache(struct kmem_cache *s)
 {
        int node;
        unsigned long count = 0;
@@ -4682,6 +4720,8 @@ static long validate_slab_cache(struct kmem_cache *s)
 
        return count;
 }
+EXPORT_SYMBOL(validate_slab_cache);
+
 /*
  * Generate lists of code addresses where slabcache objects are allocated
  * and freed.
--

2.31.1.272.g89b43f80a5

Acked-by on v4 2/3
#8 lore raw

Re: [PATCH v4 2/3] mm/slub, kunit: add a KUnit test for SLUB debugging functionality

In reply to [email protected]
Quoted 24 lines · On 4/13/21 12:07 PM, [email protected] wrote:

From: Oliver Glitta <[email protected]>

SLUB has resiliency_test() function which is hidden behind #ifdef SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody runs it. KUnit should be a proper replacement for it.

Try changing byte in redzone after allocation and changing pointer to next free node, first byte, 50th byte and redzone byte. Check if validation finds errors.

There are several differences from the original resiliency test:
Tests create own caches with known state instead of corrupting shared kmalloc caches.

The corruption of freepointer uses correct offset, the original resiliency test got broken with freepointer changes.

Scratch changing random byte test, because it does not have meaning in this form where we need deterministic results.

Add new option CONFIG_SLUB_KUNIT_TEST in Kconfig.
Because the test deliberatly modifies non-allocated objects, it depends on !KASAN which would have otherwise prevented that.

Quoted 5 lines

Use kunit_resource to count errors in cache and silence bug reports. Count error whenever slab_bug() or slab_fix() is called or when the count of pages is wrong.

(again with a disclaimer that I'm the advisor of Oliver's student project)

#9 lore raw

PATCH v4 3/3 slub: remove resiliency_test() function

In reply to [email protected]

From: Oliver Glitta <[email protected]>

Function resiliency_test() is hidden behind #ifdef SLUB_RESILIENCY_TEST that is not part of Kconfig, so nobody runs it.

This function is replaced with KUnit test for SLUB added by the previous patch "selftests: add a KUnit test for SLUB debugging functionality".

---
 mm/slub.c | 64 -------------------------------------------------------
 1 file changed, 64 deletions(-)
mm/slub.c +0 -64
index d7df8841d90a..c65e2c471a13 100644
@@ -154,9 +154,6 @@ static inline bool kmem_cache_has_cpu_partial(struct kmem_cache *s)
  * - Variable sizing of the per node arrays
  */
 
-/* Enable to test recovery from slab corruption on boot */
-#undef SLUB_RESILIENCY_TEST
-
 /* Enable to log cmpxchg failures */
 #undef SLUB_DEBUG_CMPXCHG
 
@@ -4939,66 +4936,6 @@ static int list_locations(struct kmem_cache *s, char *buf,
 }
 #endif	/* CONFIG_SLUB_DEBUG */
 
-#ifdef SLUB_RESILIENCY_TEST
-static void __init resiliency_test(void)
-{
-	u8 *p;
-	int type = KMALLOC_NORMAL;
-
-	BUILD_BUG_ON(KMALLOC_MIN_SIZE > 16 || KMALLOC_SHIFT_HIGH < 10);
-
-	pr_err("SLUB resiliency testing\n");
-	pr_err("-----------------------\n");
-	pr_err("A. Corruption after allocation\n");
-
-	p = kzalloc(16, GFP_KERNEL);
-	p[16] = 0x12;
-	pr_err("\n1. kmalloc-16: Clobber Redzone/next pointer 0x12->0x%p\n\n",
-	       p + 16);
-
-	validate_slab_cache(kmalloc_caches[type][4]);
-
-	/* Hmmm... The next two are dangerous */
-	p = kzalloc(32, GFP_KERNEL);
-	p[32 + sizeof(void *)] = 0x34;
-	pr_err("\n2. kmalloc-32: Clobber next pointer/next slab 0x34 -> -0x%p\n",
-	       p);
-	pr_err("If allocated object is overwritten then not detectable\n\n");
-
-	validate_slab_cache(kmalloc_caches[type][5]);
-	p = kzalloc(64, GFP_KERNEL);
-	p += 64 + (get_cycles() & 0xff) * sizeof(void *);
-	*p = 0x56;
-	pr_err("\n3. kmalloc-64: corrupting random byte 0x56->0x%p\n",
-	       p);
-	pr_err("If allocated object is overwritten then not detectable\n\n");
-	validate_slab_cache(kmalloc_caches[type][6]);
-
-	pr_err("\nB. Corruption after free\n");
-	p = kzalloc(128, GFP_KERNEL);
-	kfree(p);
-	*p = 0x78;
-	pr_err("1. kmalloc-128: Clobber first word 0x78->0x%p\n\n", p);
-	validate_slab_cache(kmalloc_caches[type][7]);
-
-	p = kzalloc(256, GFP_KERNEL);
-	kfree(p);
-	p[50] = 0x9a;
-	pr_err("\n2. kmalloc-256: Clobber 50th byte 0x9a->0x%p\n\n", p);
-	validate_slab_cache(kmalloc_caches[type][8]);
-
-	p = kzalloc(512, GFP_KERNEL);
-	kfree(p);
-	p[512] = 0xab;
-	pr_err("\n3. kmalloc-512: Clobber redzone 0xab->0x%p\n\n", p);
-	validate_slab_cache(kmalloc_caches[type][9]);
-}
-#else
-#ifdef CONFIG_SYSFS
-static void resiliency_test(void) {};
-#endif
-#endif	/* SLUB_RESILIENCY_TEST */
-
 #ifdef CONFIG_SYSFS
 enum slab_stat_type {
 	SL_ALL,			/* All slabs */
@@ -5847,7 +5784,6 @@ static int __init slab_sysfs_init(void)
 	}
 
 	mutex_unlock(&slab_mutex);
-	resiliency_test();
 	return 0;
 }
 
Signature · 1 line
2.31.1.272.g89b43f80a5
Reviewed-by on v4 1/3
#10 lore raw
In reply to [email protected]
Quoted 7 lines · On Tue, Apr 13, 2021 at 3:07 AM <[email protected]> wrote:

From: Vlastimil Babka <[email protected]>

The upcoming SLUB kunit test will be calling kunit_find_named_resource() from a context with disabled interrupts. That means kunit's test->lock needs to be IRQ safe to avoid potential deadlocks and lockdep splats.

Quoted 5 lines

This patch therefore changes the test->lock usage to spin_lock_irqsave() and spin_unlock_irqrestore().

Thanks!