MediaTek eMMC inline encryption support
v3 cover MediaTek eMMC inline encryption support
Hello,
Mediatek eMMC hardware IP has Inline Crypto Engine (ICE), we support inline encryption now.
For Inline Crypto Engine (ICE), see:
- https://lore.kernel.org/linux-arm-msm/
[email protected]/T/
This patchset supports Mediatek eMMC inline encryption which meets the upcoming version of the eMMC specification such as v5.1 or v5.2.
Patch 1-2, add crypto property and crypto clock, patch 3, document the device tree description about crypto clock.
Please noted that there is a special way of on/off crypto hardware IP in our SoCs, the enable bit must be controlled under ARM highest security level, that means must in ARM trusted firmware(ATF).
Changed in v3:
- Removed "mmc: Mediatek: enable crypto hardware engine" patch temporarily. Needs finding a better way for enable crypto hardware IP through ATF, so remove "mmc: Mediatek: enable crypto hardware engine" patch temporarily, we could enable it in ATF directly when boot up which will be a workaround solution. Discussing about this, see: https://lore.kernel.org/linux-mmc/
YE%[email protected]/T/#t
- We will put the above mentioned patch in a single patch
Peng Zhou (3):
mmc: Mediatek: add Inline Crypto Engine support
arm64: dts: Mediatek: MT6779: add mmc node with ICE setting
dt-bingdings: mmc: Mediatek: add ICE clock
Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 6 ++++-- arch/arm64/boot/dts/mediatek/mt6779.dtsi | 14 ++++++++++++++ drivers/mmc/host/mtk-sd.c | 15 ++++++++++++++- 3 files changed, 32 insertions(+), 3 deletions(-)
PATCH RESEND v3 3/3 dt-bingdings: mmc: Mediatek: add ICE clock
From: Peng Zhou <[email protected]>
Document the binding for crypto clock of the Inline Crypto Engine (ICE) on Mediatek SoCs.
--- Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/mmc/mtk-sd.yaml +4 -2
@@ -37,7 +37,7 @@ properties: description: Should contain phandle for the clock feeding the MMC controller. minItems: 2 - maxItems: 8 + maxItems: 9 items: - description: source clock (required). - description: HCLK which used for host (required).
@@ -47,10 +47,11 @@ properties: - description: peripheral bus clock gate (required for MT8192). - description: AXI bus clock gate (required for MT8192). - description: AHB bus clock gate (required for MT8192). + - description: crypto clock used for data encrypt/decrypt (optional). clock-names: minItems: 2 - maxItems: 8 + maxItems: 9 items: - const: source - const: hclk
@@ -60,6 +61,7 @@ properties: - const: pclk_cg - const: axi_cg - const: ahb_cg + - const: crypto pinctrl-names: items:
Signature · 1 line
2.18.0