Skip to contentSkip to conversation

mmc-utils: Re-submit of the erase command addition plus remval of MMC_IOC_MULTI_CMD ifndef for erase. Re-committing the change per request by Avir.

PATCH RESEND In review [email protected] 5 participants 8 messages Apr 22, 2021 – Apr 26, 2021 MMC, SD and SDIO

lore
Share & tools
lore
#0 lore raw

PATCH RESEND v3 1/1 mmc-utils: Re-submit of the erase command addition plus remval of MMC_IOC_MULTI_CMD ifndef for erase. Re-committing the change per request by Avir.

From: Kimito Sakata <[email protected]>

---
 mmc.c      |   8 ++++
 mmc.h      |  13 +++++-
 mmc_cmds.c | 135 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 mmc_cmds.h |   1 +
 4 files changed, 156 insertions(+), 1 deletion(-)
mmc.c +8 -0
index f3d724b..eb2638b 100644
@@ -229,6 +229,14 @@ static struct Command commands[] = {
 		"Run Field Firmware Update with <image name> on <device>.\n",
 	  NULL
 	},
+	{ do_erase, -4,
+	"erase", "<type> " "<start address> " "<end address> " "<device>\n"
+		"Send Erase CMD38 with specific argument to the <device>\n\n"
+		"NOTE!: This will delete all user data in the specified region of the device\n"
+		"<type> must be: legacy | discard | secure-erase | "
+		"secure-trim1 | secure-trim2 | trim \n",
+	NULL
+	},
 	{ 0, 0, 0, 0 }
 };
 
mmc.h +12 -1
index 5754a9d..e9766d7 100644
@@ -35,7 +35,15 @@
 #define MMC_SET_WRITE_PROT	28    /* ac   [31:0] data addr   R1b */
 #define MMC_CLEAR_WRITE_PROT	29    /* ac   [31:0] data addr   R1b */
 #define MMC_SEND_WRITE_PROT_TYPE 31   /* ac   [31:0] data addr   R1  */
-
+#define MMC_ERASE_GROUP_START	35    /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE_GROUP_END	36    /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE		38    /* ac   [31] Secure request
+					      [30:16] set to 0
+					      [15] Force Garbage Collect request
+					      [14:2] set to 0
+					      [1] Discard Enable
+					      [0] Identify Write Blocks for
+					      Erase (or TRIM Enable)  R1b */
 /*
  * EXT_CSD fields
  */
@@ -62,6 +70,7 @@
 #define EXT_CSD_CACHE_SIZE_2		251
 #define EXT_CSD_CACHE_SIZE_1		250
 #define EXT_CSD_CACHE_SIZE_0		249
+#define EXT_CSD_SEC_FEATURE_SUPPORT	231
 #define EXT_CSD_BOOT_INFO		228	/* R/W */
 #define EXT_CSD_HC_ERASE_GRP_SIZE	224
 #define EXT_CSD_HC_WP_GRP_SIZE		221
@@ -190,6 +199,8 @@
 #define EXT_CSD_REV_V4_2		2
 #define EXT_CSD_REV_V4_1		1
 #define EXT_CSD_REV_V4_0		0
+#define EXT_CSD_SEC_GB_CL_EN		(1<<4)
+#define EXT_CSD_SEC_ER_EN		(1<<0)
 
 
 /* From kernel linux/mmc/core.h */
mmc_cmds.c +135 -0

141 lines not on this page · raw message

mmc_cmds.h +1 -0
index 9d3246c..8331ab2 100644
@@ -45,3 +45,4 @@ int do_ffu(int nargs, char **argv);
 int do_read_scr(int argc, char **argv);
 int do_read_cid(int argc, char **argv);
 int do_read_csd(int argc, char **argv);
+int do_erase(int nargs, char **argv);
Signature · 1 line
2.24.1 (Apple Git-126)
#1 lore raw
Quoted 4 lines

From: Kimito Sakata <[email protected]>

Hi Kimito,
Please use a proper subject and commit log body.
If you don't understand the difference between those two - please ask. Also for consistency, you might want to use your oracle mail for your Signed-off-by tag. You need to change your git configs for that.

Thanks,
Avri

Quoted 228 lines
---
 mmc.c      |   8 ++++
 mmc.h      |  13 +++++-
 mmc_cmds.c | 135
+++++++++++++++++++++++++++++++++++++++++++++++++++++
 mmc_cmds.h |   1 +
 4 files changed, 156 insertions(+), 1 deletion(-)
mmc.c +4 -0
index f3d724b..eb2638b 100644
@@ -229,6 +229,14 @@ static struct Command commands[] = {
                "Run Field Firmware Update with <image name> on <device>.\n",
          NULL
        },
+       { do_erase, -4,
+       "erase", "<type> " "<start address> " "<end address> " "<device>\n"
+               "Send Erase CMD38 with specific argument to the <device>\n\n"
+               "NOTE!: This will delete all user data in the specified region of the

device\n"

mmc.c +4 -0
+               "<type> must be: legacy | discard | secure-erase | "
+               "secure-trim1 | secure-trim2 | trim \n",
+       NULL
+       },
        { 0, 0, 0, 0 }
 };
mmc.h +12 -1
index 5754a9d..e9766d7 100644
@@ -35,7 +35,15 @@
 #define MMC_SET_WRITE_PROT     28    /* ac   [31:0] data addr   R1b */
 #define MMC_CLEAR_WRITE_PROT   29    /* ac   [31:0] data addr   R1b */
 #define MMC_SEND_WRITE_PROT_TYPE 31   /* ac   [31:0] data addr   R1  */
-
+#define MMC_ERASE_GROUP_START  35    /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE_GROUP_END    36    /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE              38    /* ac   [31] Secure request
+                                             [30:16] set to 0
+                                             [15] Force Garbage Collect request
+                                             [14:2] set to 0
+                                             [1] Discard Enable
+                                             [0] Identify Write Blocks for
+                                             Erase (or TRIM Enable)  R1b */
 /*
  * EXT_CSD fields
  */
@@ -62,6 +70,7 @@
 #define EXT_CSD_CACHE_SIZE_2           251
 #define EXT_CSD_CACHE_SIZE_1           250
 #define EXT_CSD_CACHE_SIZE_0           249
+#define EXT_CSD_SEC_FEATURE_SUPPORT    231
 #define EXT_CSD_BOOT_INFO              228     /* R/W */
 #define EXT_CSD_HC_ERASE_GRP_SIZE      224
 #define EXT_CSD_HC_WP_GRP_SIZE         221
@@ -190,6 +199,8 @@
 #define EXT_CSD_REV_V4_2               2
 #define EXT_CSD_REV_V4_1               1
 #define EXT_CSD_REV_V4_0               0
+#define EXT_CSD_SEC_GB_CL_EN           (1<<4)
+#define EXT_CSD_SEC_ER_EN              (1<<0)
 
 
 /* From kernel linux/mmc/core.h */
mmc_cmds.c +4 -0
index 6c24cea..9340e3f 100644
@@ -2514,6 +2514,141 @@ int do_cache_dis(int nargs, char **argv)
        return do_cache_ctrl(0, nargs, argv);
 }
 
+static int erase(int dev_fd, __u32 argin, __u32 start, __u32 end)
+{
+#ifndef MMC_IOC_MULTI_CMD
+       fprintf(stderr, "mmc-utils has been compiled without

MMC_IOC_MULTI_CMD"

mmc_cmds.c +18 -0
+                       " support, needed by erase.\n");
+       return -ENOTSUP;
+#else
+       int ret = 0;
+       struct mmc_ioc_multi_cmd *multi_cmd;
+
+       multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) +
+                          3 * sizeof(struct mmc_ioc_cmd));
+       if (!multi_cmd) {
+               perror("Failed to allocate memory");
+               return -ENOMEM;
+       }
+
+       multi_cmd->num_of_cmds = 3;
+       /* Set erase start address */
+       multi_cmd->cmds[0].opcode = MMC_ERASE_GROUP_START;
+       multi_cmd->cmds[0].arg = start;
+       multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |

MMC_CMD_AC;

mmc_cmds.c +6 -0
+       multi_cmd->cmds[0].write_flag = 1;
+
+       /* Set erase end address */
+       multi_cmd->cmds[1].opcode = MMC_ERASE_GROUP_END;
+       multi_cmd->cmds[1].arg = end;
+       multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |

MMC_CMD_AC;

mmc_cmds.c +7 -0
+       multi_cmd->cmds[1].write_flag = 1;
+
+       /* Send Erase Command */
+       multi_cmd->cmds[2].opcode = MMC_ERASE;
+       multi_cmd->cmds[2].arg = argin;
+       multi_cmd->cmds[2].cmd_timeout_ms = 300*255*255;
+       multi_cmd->cmds[2].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |

MMC_CMD_AC;

mmc_cmds.c +22 -0
+       multi_cmd->cmds[2].write_flag = 1;
+
+       /* send erase cmd with multi-cmd */
+       ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd);
+       if (ret)
+               perror("Erase multi-cmd ioctl");
+
+       free(multi_cmd);
+       return ret;
+#endif
+}
+
+int do_erase(int nargs, char **argv)
+{
+       int dev_fd, ret;
+       char *print_str;
+       char **eptr = NULL;
+       __u8 ext_csd[512], checkup_mask = 0;
+       __u32 arg, start, end;
+
+       if (nargs != 5) {
+               fprintf(stderr, "Usage: erase <type> <start addr> <end addr>

</path/to/mmcblkX>\n");

mmc_cmds.c +78 -0
+               exit(1);
+       }
+
+       if (strstr(argv[2], "0x") || strstr(argv[2], "0X"))
+               start = strtol(argv[2], eptr, 16);
+       else
+               start = strtol(argv[2], eptr, 10);
+
+       if (strstr(argv[3], "0x") || strstr(argv[3], "0X"))
+               end = strtol(argv[3], eptr, 16);
+       else
+               end = strtol(argv[3], eptr, 10);
+
+       if (end < start) {
+               fprintf(stderr, "erase start [0x%08x] > erase end [0x%08x]\n",
+                       start, end);
+               exit(1);
+       }
+
+       if (strcmp(argv[1], "legacy") == 0) {
+               arg = 0x00000000;
+               print_str = "Legacy Erase";
+       } else if (strcmp(argv[1], "discard") == 0) {
+               arg = 0x00000003;
+               print_str = "Discard";
+       } else if (strcmp(argv[1], "secure-erase") == 0) {
+               print_str = "Secure Erase";
+               checkup_mask = EXT_CSD_SEC_ER_EN;
+               arg = 0x80000000;
+       } else if (strcmp(argv[1], "secure-trim1") == 0) {
+               print_str = "Secure Trim Step 1";
+               checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
+               arg = 0x80000001;
+       } else if (strcmp(argv[1], "secure-trim2") == 0) {
+               print_str = "Secure Trim Step 2";
+               checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
+               arg = 0x80008000;
+       } else if (strcmp(argv[1], "trim") == 0) {
+               print_str = "Trim";
+               checkup_mask = EXT_CSD_SEC_GB_CL_EN;
+               arg = 0x00000001;
+       } else {
+               fprintf(stderr, "Unknown erase type: %s\n", argv[1]);
+               exit(1);
+       }
+
+       dev_fd = open(argv[4], O_RDWR);
+       if (dev_fd < 0) {
+               perror(argv[4]);
+               exit(1);
+       }
+
+       if (checkup_mask) {
+               ret = read_extcsd(dev_fd, ext_csd);
+               if (ret) {
+                       fprintf(stderr, "Could not read EXT_CSD from %s\n",
+                               argv[4]);
+                       goto out;
+               }
+               if ((checkup_mask & ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) !=
+                                                               checkup_mask) {
+                       fprintf(stderr, "%s is not supported in %s\n",
+                               print_str, argv[4]);
+                       ret = -ENOTSUP;
+                       goto out;
+               }
+
+       }
+       printf("Executing %s from 0x%08x to 0x%08x\n", print_str, start, end);
+
+       ret = erase(dev_fd, arg, start, end);
+out:
+       printf(" %s %s!\n\n", print_str, ret ? "Failed" : "Succeed");
+       close(dev_fd);
+       return ret;
+}
+
+
 int do_ffu(int nargs, char **argv)
 {
 #ifndef MMC_IOC_MULTI_CMD
mmc_cmds.h +1 -1
index 9d3246c..8331ab2 100644
@@ -45,3 +45,4 @@ int do_ffu(int nargs, char **argv);
 int do_read_scr(int argc, char **argv);
 int do_read_cid(int argc, char **argv);
 int do_read_csd(int argc, char **argv);
+int do_erase(int nargs, char **argv);
--

2.24.1 (Apple Git-126)

#2 lore raw

+Bean

Quoted 9 lines
Quoted 3 lines

From: Kimito Sakata <[email protected]>

Hi Kimito,
Please use a proper subject and commit log body.
If you don't understand the difference between those two - please ask. Also for consistency, you might want to use your oracle mail for your Signed- off-by tag.
You need to change your git configs for that.

Also, can you refer to this patch submitted by Bean - https://www.spinics.net/lists/linux-mmc/msg63582.html
Are you co-developing this together?

Thanks,
Avri

Quoted 232 lines

Thanks,
Avri

Quoted 228 lines
---
 mmc.c      |   8 ++++
 mmc.h      |  13 +++++-
 mmc_cmds.c | 135
+++++++++++++++++++++++++++++++++++++++++++++++++++++
 mmc_cmds.h |   1 +
 4 files changed, 156 insertions(+), 1 deletion(-)
mmc.c +4 -0
index f3d724b..eb2638b 100644
@@ -229,6 +229,14 @@ static struct Command commands[] = {
                "Run Field Firmware Update with <image name> on <device>.\n",
          NULL
        },
+       { do_erase, -4,
+       "erase", "<type> " "<start address> " "<end address> " "<device>\n"
+               "Send Erase CMD38 with specific argument to the <device>\n\n"
+               "NOTE!: This will delete all user data in the specified region of the

device\n"

mmc.c +4 -0
+               "<type> must be: legacy | discard | secure-erase | "
+               "secure-trim1 | secure-trim2 | trim \n",
+       NULL
+       },
        { 0, 0, 0, 0 }
 };
mmc.h +12 -1
index 5754a9d..e9766d7 100644
@@ -35,7 +35,15 @@
 #define MMC_SET_WRITE_PROT     28    /* ac   [31:0] data addr   R1b */
 #define MMC_CLEAR_WRITE_PROT   29    /* ac   [31:0] data addr   R1b */
 #define MMC_SEND_WRITE_PROT_TYPE 31   /* ac   [31:0] data addr   R1  */
-
+#define MMC_ERASE_GROUP_START  35    /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE_GROUP_END    36    /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE              38    /* ac   [31] Secure request
+                                             [30:16] set to 0
+                                             [15] Force Garbage Collect request
+                                             [14:2] set to 0
+                                             [1] Discard Enable
+                                             [0] Identify Write Blocks for
+                                             Erase (or TRIM Enable)  R1b */
 /*
  * EXT_CSD fields
  */
@@ -62,6 +70,7 @@
 #define EXT_CSD_CACHE_SIZE_2           251
 #define EXT_CSD_CACHE_SIZE_1           250
 #define EXT_CSD_CACHE_SIZE_0           249
+#define EXT_CSD_SEC_FEATURE_SUPPORT    231
 #define EXT_CSD_BOOT_INFO              228     /* R/W */
 #define EXT_CSD_HC_ERASE_GRP_SIZE      224
 #define EXT_CSD_HC_WP_GRP_SIZE         221
@@ -190,6 +199,8 @@
 #define EXT_CSD_REV_V4_2               2
 #define EXT_CSD_REV_V4_1               1
 #define EXT_CSD_REV_V4_0               0
+#define EXT_CSD_SEC_GB_CL_EN           (1<<4)
+#define EXT_CSD_SEC_ER_EN              (1<<0)
 
 
 /* From kernel linux/mmc/core.h */
mmc_cmds.c +4 -0
index 6c24cea..9340e3f 100644
@@ -2514,6 +2514,141 @@ int do_cache_dis(int nargs, char **argv)
        return do_cache_ctrl(0, nargs, argv);
 }
 
+static int erase(int dev_fd, __u32 argin, __u32 start, __u32 end)
+{
+#ifndef MMC_IOC_MULTI_CMD
+       fprintf(stderr, "mmc-utils has been compiled without

MMC_IOC_MULTI_CMD"

mmc_cmds.c +18 -0
+                       " support, needed by erase.\n");
+       return -ENOTSUP;
+#else
+       int ret = 0;
+       struct mmc_ioc_multi_cmd *multi_cmd;
+
+       multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) +
+                          3 * sizeof(struct mmc_ioc_cmd));
+       if (!multi_cmd) {
+               perror("Failed to allocate memory");
+               return -ENOMEM;
+       }
+
+       multi_cmd->num_of_cmds = 3;
+       /* Set erase start address */
+       multi_cmd->cmds[0].opcode = MMC_ERASE_GROUP_START;
+       multi_cmd->cmds[0].arg = start;
+       multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |

MMC_CMD_AC;

mmc_cmds.c +6 -0
+       multi_cmd->cmds[0].write_flag = 1;
+
+       /* Set erase end address */
+       multi_cmd->cmds[1].opcode = MMC_ERASE_GROUP_END;
+       multi_cmd->cmds[1].arg = end;
+       multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |

MMC_CMD_AC;

mmc_cmds.c +7 -0
+       multi_cmd->cmds[1].write_flag = 1;
+
+       /* Send Erase Command */
+       multi_cmd->cmds[2].opcode = MMC_ERASE;
+       multi_cmd->cmds[2].arg = argin;
+       multi_cmd->cmds[2].cmd_timeout_ms = 300*255*255;
+       multi_cmd->cmds[2].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |

MMC_CMD_AC;

mmc_cmds.c +22 -0
+       multi_cmd->cmds[2].write_flag = 1;
+
+       /* send erase cmd with multi-cmd */
+       ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd);
+       if (ret)
+               perror("Erase multi-cmd ioctl");
+
+       free(multi_cmd);
+       return ret;
+#endif
+}
+
+int do_erase(int nargs, char **argv)
+{
+       int dev_fd, ret;
+       char *print_str;
+       char **eptr = NULL;
+       __u8 ext_csd[512], checkup_mask = 0;
+       __u32 arg, start, end;
+
+       if (nargs != 5) {
+               fprintf(stderr, "Usage: erase <type> <start addr> <end addr>

</path/to/mmcblkX>\n");

mmc_cmds.c +78 -0
+               exit(1);
+       }
+
+       if (strstr(argv[2], "0x") || strstr(argv[2], "0X"))
+               start = strtol(argv[2], eptr, 16);
+       else
+               start = strtol(argv[2], eptr, 10);
+
+       if (strstr(argv[3], "0x") || strstr(argv[3], "0X"))
+               end = strtol(argv[3], eptr, 16);
+       else
+               end = strtol(argv[3], eptr, 10);
+
+       if (end < start) {
+               fprintf(stderr, "erase start [0x%08x] > erase end [0x%08x]\n",
+                       start, end);
+               exit(1);
+       }
+
+       if (strcmp(argv[1], "legacy") == 0) {
+               arg = 0x00000000;
+               print_str = "Legacy Erase";
+       } else if (strcmp(argv[1], "discard") == 0) {
+               arg = 0x00000003;
+               print_str = "Discard";
+       } else if (strcmp(argv[1], "secure-erase") == 0) {
+               print_str = "Secure Erase";
+               checkup_mask = EXT_CSD_SEC_ER_EN;
+               arg = 0x80000000;
+       } else if (strcmp(argv[1], "secure-trim1") == 0) {
+               print_str = "Secure Trim Step 1";
+               checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
+               arg = 0x80000001;
+       } else if (strcmp(argv[1], "secure-trim2") == 0) {
+               print_str = "Secure Trim Step 2";
+               checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
+               arg = 0x80008000;
+       } else if (strcmp(argv[1], "trim") == 0) {
+               print_str = "Trim";
+               checkup_mask = EXT_CSD_SEC_GB_CL_EN;
+               arg = 0x00000001;
+       } else {
+               fprintf(stderr, "Unknown erase type: %s\n", argv[1]);
+               exit(1);
+       }
+
+       dev_fd = open(argv[4], O_RDWR);
+       if (dev_fd < 0) {
+               perror(argv[4]);
+               exit(1);
+       }
+
+       if (checkup_mask) {
+               ret = read_extcsd(dev_fd, ext_csd);
+               if (ret) {
+                       fprintf(stderr, "Could not read EXT_CSD from %s\n",
+                               argv[4]);
+                       goto out;
+               }
+               if ((checkup_mask & ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) !=
+                                                               checkup_mask) {
+                       fprintf(stderr, "%s is not supported in %s\n",
+                               print_str, argv[4]);
+                       ret = -ENOTSUP;
+                       goto out;
+               }
+
+       }
+       printf("Executing %s from 0x%08x to 0x%08x\n", print_str, start, end);
+
+       ret = erase(dev_fd, arg, start, end);
+out:
+       printf(" %s %s!\n\n", print_str, ret ? "Failed" : "Succeed");
+       close(dev_fd);
+       return ret;
+}
+
+
 int do_ffu(int nargs, char **argv)
 {
 #ifndef MMC_IOC_MULTI_CMD
mmc_cmds.h +1 -1
index 9d3246c..8331ab2 100644
@@ -45,3 +45,4 @@ int do_ffu(int nargs, char **argv);
 int do_read_scr(int argc, char **argv);
 int do_read_cid(int argc, char **argv);
 int do_read_csd(int argc, char **argv);
+int do_erase(int nargs, char **argv);
--

2.24.1 (Apple Git-126)

#7 lore raw

Re: [External] : RE: [PATCH RESEND v3] mmc-utils: Re-submit of the erase command addition plus remval of MMC_IOC_MULTI_CMD ifndef for erase. Re-committing the change per request by Avir.

In reply to Avri Altman
Quoted 6 lines · Avri Altman
Quoted 3 lines

From: Kimito Sakata <[email protected]>

Hi Kimito,
Please use a proper subject and commit log body.
If you don't understand the difference between those two - please ask.

I don't. I would appreciate an explanation. New to submitting changes via git.

Quoted 2 lines

Also for consistency, you might want to use your oracle mail for your Signed-off-by tag. You need to change your git configs for that.

I tried all kinds of firewall settings and no go via my work network. Is why I ended up using my personal gmail smtp. Is that a problem?

Thanks
Kimito

Quoted 232 lines

Thanks,
Avri

Quoted 228 lines
---
  mmc.c      |   8 ++++
  mmc.h      |  13 +++++-
  mmc_cmds.c | 135
+++++++++++++++++++++++++++++++++++++++++++++++++++++
  mmc_cmds.h |   1 +
  4 files changed, 156 insertions(+), 1 deletion(-)
mmc.c +4 -0
index f3d724b..eb2638b 100644
@@ -229,6 +229,14 @@ static struct Command commands[] = {
                 "Run Field Firmware Update with <image name> on <device>.\n",
           NULL
         },
+       { do_erase, -4,
+       "erase", "<type> " "<start address> " "<end address> " "<device>\n"
+               "Send Erase CMD38 with specific argument to the <device>\n\n"
+               "NOTE!: This will delete all user data in the specified region of the

device\n"

mmc.c +4 -0
+               "<type> must be: legacy | discard | secure-erase | "
+               "secure-trim1 | secure-trim2 | trim \n",
+       NULL
+       },
         { 0, 0, 0, 0 }
  };
mmc.h +12 -1
index 5754a9d..e9766d7 100644
@@ -35,7 +35,15 @@
  #define MMC_SET_WRITE_PROT     28    /* ac   [31:0] data addr   R1b */
  #define MMC_CLEAR_WRITE_PROT   29    /* ac   [31:0] data addr   R1b */
  #define MMC_SEND_WRITE_PROT_TYPE 31   /* ac   [31:0] data addr   R1  */
-
+#define MMC_ERASE_GROUP_START  35    /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE_GROUP_END    36    /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE              38    /* ac   [31] Secure request
+                                             [30:16] set to 0
+                                             [15] Force Garbage Collect request
+                                             [14:2] set to 0
+                                             [1] Discard Enable
+                                             [0] Identify Write Blocks for
+                                             Erase (or TRIM Enable)  R1b */
  /*
   * EXT_CSD fields
   */
@@ -62,6 +70,7 @@
  #define EXT_CSD_CACHE_SIZE_2           251
  #define EXT_CSD_CACHE_SIZE_1           250
  #define EXT_CSD_CACHE_SIZE_0           249
+#define EXT_CSD_SEC_FEATURE_SUPPORT    231
  #define EXT_CSD_BOOT_INFO              228     /* R/W */
  #define EXT_CSD_HC_ERASE_GRP_SIZE      224
  #define EXT_CSD_HC_WP_GRP_SIZE         221
@@ -190,6 +199,8 @@
  #define EXT_CSD_REV_V4_2               2
  #define EXT_CSD_REV_V4_1               1
  #define EXT_CSD_REV_V4_0               0
+#define EXT_CSD_SEC_GB_CL_EN           (1<<4)
+#define EXT_CSD_SEC_ER_EN              (1<<0)
 
 
  /* From kernel linux/mmc/core.h */
mmc_cmds.c +4 -0
index 6c24cea..9340e3f 100644
@@ -2514,6 +2514,141 @@ int do_cache_dis(int nargs, char **argv)
         return do_cache_ctrl(0, nargs, argv);
  }
 
+static int erase(int dev_fd, __u32 argin, __u32 start, __u32 end)
+{
+#ifndef MMC_IOC_MULTI_CMD
+       fprintf(stderr, "mmc-utils has been compiled without

MMC_IOC_MULTI_CMD"

mmc_cmds.c +18 -0
+                       " support, needed by erase.\n");
+       return -ENOTSUP;
+#else
+       int ret = 0;
+       struct mmc_ioc_multi_cmd *multi_cmd;
+
+       multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) +
+                          3 * sizeof(struct mmc_ioc_cmd));
+       if (!multi_cmd) {
+               perror("Failed to allocate memory");
+               return -ENOMEM;
+       }
+
+       multi_cmd->num_of_cmds = 3;
+       /* Set erase start address */
+       multi_cmd->cmds[0].opcode = MMC_ERASE_GROUP_START;
+       multi_cmd->cmds[0].arg = start;
+       multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |

MMC_CMD_AC;

mmc_cmds.c +6 -0
+       multi_cmd->cmds[0].write_flag = 1;
+
+       /* Set erase end address */
+       multi_cmd->cmds[1].opcode = MMC_ERASE_GROUP_END;
+       multi_cmd->cmds[1].arg = end;
+       multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |

MMC_CMD_AC;

mmc_cmds.c +7 -0
+       multi_cmd->cmds[1].write_flag = 1;
+
+       /* Send Erase Command */
+       multi_cmd->cmds[2].opcode = MMC_ERASE;
+       multi_cmd->cmds[2].arg = argin;
+       multi_cmd->cmds[2].cmd_timeout_ms = 300*255*255;
+       multi_cmd->cmds[2].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |

MMC_CMD_AC;

mmc_cmds.c +22 -0
+       multi_cmd->cmds[2].write_flag = 1;
+
+       /* send erase cmd with multi-cmd */
+       ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd);
+       if (ret)
+               perror("Erase multi-cmd ioctl");
+
+       free(multi_cmd);
+       return ret;
+#endif
+}
+
+int do_erase(int nargs, char **argv)
+{
+       int dev_fd, ret;
+       char *print_str;
+       char **eptr = NULL;
+       __u8 ext_csd[512], checkup_mask = 0;
+       __u32 arg, start, end;
+
+       if (nargs != 5) {
+               fprintf(stderr, "Usage: erase <type> <start addr> <end addr>

</path/to/mmcblkX>\n");

mmc_cmds.c +78 -0
+               exit(1);
+       }
+
+       if (strstr(argv[2], "0x") || strstr(argv[2], "0X"))
+               start = strtol(argv[2], eptr, 16);
+       else
+               start = strtol(argv[2], eptr, 10);
+
+       if (strstr(argv[3], "0x") || strstr(argv[3], "0X"))
+               end = strtol(argv[3], eptr, 16);
+       else
+               end = strtol(argv[3], eptr, 10);
+
+       if (end < start) {
+               fprintf(stderr, "erase start [0x%08x] > erase end [0x%08x]\n",
+                       start, end);
+               exit(1);
+       }
+
+       if (strcmp(argv[1], "legacy") == 0) {
+               arg = 0x00000000;
+               print_str = "Legacy Erase";
+       } else if (strcmp(argv[1], "discard") == 0) {
+               arg = 0x00000003;
+               print_str = "Discard";
+       } else if (strcmp(argv[1], "secure-erase") == 0) {
+               print_str = "Secure Erase";
+               checkup_mask = EXT_CSD_SEC_ER_EN;
+               arg = 0x80000000;
+       } else if (strcmp(argv[1], "secure-trim1") == 0) {
+               print_str = "Secure Trim Step 1";
+               checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
+               arg = 0x80000001;
+       } else if (strcmp(argv[1], "secure-trim2") == 0) {
+               print_str = "Secure Trim Step 2";
+               checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
+               arg = 0x80008000;
+       } else if (strcmp(argv[1], "trim") == 0) {
+               print_str = "Trim";
+               checkup_mask = EXT_CSD_SEC_GB_CL_EN;
+               arg = 0x00000001;
+       } else {
+               fprintf(stderr, "Unknown erase type: %s\n", argv[1]);
+               exit(1);
+       }
+
+       dev_fd = open(argv[4], O_RDWR);
+       if (dev_fd < 0) {
+               perror(argv[4]);
+               exit(1);
+       }
+
+       if (checkup_mask) {
+               ret = read_extcsd(dev_fd, ext_csd);
+               if (ret) {
+                       fprintf(stderr, "Could not read EXT_CSD from %s\n",
+                               argv[4]);
+                       goto out;
+               }
+               if ((checkup_mask & ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) !=
+                                                               checkup_mask) {
+                       fprintf(stderr, "%s is not supported in %s\n",
+                               print_str, argv[4]);
+                       ret = -ENOTSUP;
+                       goto out;
+               }
+
+       }
+       printf("Executing %s from 0x%08x to 0x%08x\n", print_str, start, end);
+
+       ret = erase(dev_fd, arg, start, end);
+out:
+       printf(" %s %s!\n\n", print_str, ret ? "Failed" : "Succeed");
+       close(dev_fd);
+       return ret;
+}
+
+
  int do_ffu(int nargs, char **argv)
  {
  #ifndef MMC_IOC_MULTI_CMD
mmc_cmds.h +1 -1
index 9d3246c..8331ab2 100644
@@ -45,3 +45,4 @@ int do_ffu(int nargs, char **argv);
  int do_read_scr(int argc, char **argv);
  int do_read_cid(int argc, char **argv);
  int do_read_csd(int argc, char **argv);
+int do_erase(int nargs, char **argv);
--

2.24.1 (Apple Git-126)

#3 lore raw

Re: [External] : RE: [PATCH RESEND v3] mmc-utils: Re-submit of the erase command addition plus remval of MMC_IOC_MULTI_CMD ifndef for erase. Re-committing the change per request by Avir.

In reply to Avri Altman

Its basically the same changes. Bean was coaching me on how to send the changes.
The only difference between Bean's submit and my last one is Ulf requested me to make a change in my changes to remove the MMC_IOC_MULTI_CMD #ifndef segments.

Thanks
Kimito

Quoted 248 lines · Avri Altman

+Bean

Quoted 9 lines
Quoted 3 lines

From: Kimito Sakata <[email protected]>

Hi Kimito,
Please use a proper subject and commit log body.
If you don't understand the difference between those two - please ask. Also for consistency, you might want to use your oracle mail for your Signed- off-by tag.
You need to change your git configs for that.

Also, can you refer to this patch submitted by Bean - https://urldefense.com/v3/__https://www.spinics.net/lists/linux-mmc/msg63582.html__;!!GqivPVa7Brio!PTrg4lGpraGQnZjmxPdNPivVE4IYFevBm1M6vu3_hfHR8REY7LwkcZ3WiZc3MhF21tM$
Are you co-developing this together?

Thanks,
Avri

Quoted 231 lines

Thanks,
Avri

Quoted 228 lines
---
  mmc.c      |   8 ++++
  mmc.h      |  13 +++++-
  mmc_cmds.c | 135
+++++++++++++++++++++++++++++++++++++++++++++++++++++
  mmc_cmds.h |   1 +
  4 files changed, 156 insertions(+), 1 deletion(-)
mmc.c +4 -0
index f3d724b..eb2638b 100644
@@ -229,6 +229,14 @@ static struct Command commands[] = {
                 "Run Field Firmware Update with <image name> on <device>.\n",
           NULL
         },
+       { do_erase, -4,
+       "erase", "<type> " "<start address> " "<end address> " "<device>\n"
+               "Send Erase CMD38 with specific argument to the <device>\n\n"
+               "NOTE!: This will delete all user data in the specified region of the

device\n"

mmc.c +4 -0
+               "<type> must be: legacy | discard | secure-erase | "
+               "secure-trim1 | secure-trim2 | trim \n",
+       NULL
+       },
         { 0, 0, 0, 0 }
  };
mmc.h +12 -1
index 5754a9d..e9766d7 100644
@@ -35,7 +35,15 @@
  #define MMC_SET_WRITE_PROT     28    /* ac   [31:0] data addr   R1b */
  #define MMC_CLEAR_WRITE_PROT   29    /* ac   [31:0] data addr   R1b */
  #define MMC_SEND_WRITE_PROT_TYPE 31   /* ac   [31:0] data addr   R1  */
-
+#define MMC_ERASE_GROUP_START  35    /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE_GROUP_END    36    /* ac   [31:0] data addr   R1  */
+#define MMC_ERASE              38    /* ac   [31] Secure request
+                                             [30:16] set to 0
+                                             [15] Force Garbage Collect request
+                                             [14:2] set to 0
+                                             [1] Discard Enable
+                                             [0] Identify Write Blocks for
+                                             Erase (or TRIM Enable)  R1b */
  /*
   * EXT_CSD fields
   */
@@ -62,6 +70,7 @@
  #define EXT_CSD_CACHE_SIZE_2           251
  #define EXT_CSD_CACHE_SIZE_1           250
  #define EXT_CSD_CACHE_SIZE_0           249
+#define EXT_CSD_SEC_FEATURE_SUPPORT    231
  #define EXT_CSD_BOOT_INFO              228     /* R/W */
  #define EXT_CSD_HC_ERASE_GRP_SIZE      224
  #define EXT_CSD_HC_WP_GRP_SIZE         221
@@ -190,6 +199,8 @@
  #define EXT_CSD_REV_V4_2               2
  #define EXT_CSD_REV_V4_1               1
  #define EXT_CSD_REV_V4_0               0
+#define EXT_CSD_SEC_GB_CL_EN           (1<<4)
+#define EXT_CSD_SEC_ER_EN              (1<<0)
 
 
  /* From kernel linux/mmc/core.h */
mmc_cmds.c +4 -0
index 6c24cea..9340e3f 100644
@@ -2514,6 +2514,141 @@ int do_cache_dis(int nargs, char **argv)
         return do_cache_ctrl(0, nargs, argv);
  }
 
+static int erase(int dev_fd, __u32 argin, __u32 start, __u32 end)
+{
+#ifndef MMC_IOC_MULTI_CMD
+       fprintf(stderr, "mmc-utils has been compiled without

MMC_IOC_MULTI_CMD"

mmc_cmds.c +18 -0
+                       " support, needed by erase.\n");
+       return -ENOTSUP;
+#else
+       int ret = 0;
+       struct mmc_ioc_multi_cmd *multi_cmd;
+
+       multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) +
+                          3 * sizeof(struct mmc_ioc_cmd));
+       if (!multi_cmd) {
+               perror("Failed to allocate memory");
+               return -ENOMEM;
+       }
+
+       multi_cmd->num_of_cmds = 3;
+       /* Set erase start address */
+       multi_cmd->cmds[0].opcode = MMC_ERASE_GROUP_START;
+       multi_cmd->cmds[0].arg = start;
+       multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |

MMC_CMD_AC;

mmc_cmds.c +6 -0
+       multi_cmd->cmds[0].write_flag = 1;
+
+       /* Set erase end address */
+       multi_cmd->cmds[1].opcode = MMC_ERASE_GROUP_END;
+       multi_cmd->cmds[1].arg = end;
+       multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |

MMC_CMD_AC;

mmc_cmds.c +7 -0
+       multi_cmd->cmds[1].write_flag = 1;
+
+       /* Send Erase Command */
+       multi_cmd->cmds[2].opcode = MMC_ERASE;
+       multi_cmd->cmds[2].arg = argin;
+       multi_cmd->cmds[2].cmd_timeout_ms = 300*255*255;
+       multi_cmd->cmds[2].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |

MMC_CMD_AC;

mmc_cmds.c +22 -0
+       multi_cmd->cmds[2].write_flag = 1;
+
+       /* send erase cmd with multi-cmd */
+       ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd);
+       if (ret)
+               perror("Erase multi-cmd ioctl");
+
+       free(multi_cmd);
+       return ret;
+#endif
+}
+
+int do_erase(int nargs, char **argv)
+{
+       int dev_fd, ret;
+       char *print_str;
+       char **eptr = NULL;
+       __u8 ext_csd[512], checkup_mask = 0;
+       __u32 arg, start, end;
+
+       if (nargs != 5) {
+               fprintf(stderr, "Usage: erase <type> <start addr> <end addr>

</path/to/mmcblkX>\n");

mmc_cmds.c +78 -0
+               exit(1);
+       }
+
+       if (strstr(argv[2], "0x") || strstr(argv[2], "0X"))
+               start = strtol(argv[2], eptr, 16);
+       else
+               start = strtol(argv[2], eptr, 10);
+
+       if (strstr(argv[3], "0x") || strstr(argv[3], "0X"))
+               end = strtol(argv[3], eptr, 16);
+       else
+               end = strtol(argv[3], eptr, 10);
+
+       if (end < start) {
+               fprintf(stderr, "erase start [0x%08x] > erase end [0x%08x]\n",
+                       start, end);
+               exit(1);
+       }
+
+       if (strcmp(argv[1], "legacy") == 0) {
+               arg = 0x00000000;
+               print_str = "Legacy Erase";
+       } else if (strcmp(argv[1], "discard") == 0) {
+               arg = 0x00000003;
+               print_str = "Discard";
+       } else if (strcmp(argv[1], "secure-erase") == 0) {
+               print_str = "Secure Erase";
+               checkup_mask = EXT_CSD_SEC_ER_EN;
+               arg = 0x80000000;
+       } else if (strcmp(argv[1], "secure-trim1") == 0) {
+               print_str = "Secure Trim Step 1";
+               checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
+               arg = 0x80000001;
+       } else if (strcmp(argv[1], "secure-trim2") == 0) {
+               print_str = "Secure Trim Step 2";
+               checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
+               arg = 0x80008000;
+       } else if (strcmp(argv[1], "trim") == 0) {
+               print_str = "Trim";
+               checkup_mask = EXT_CSD_SEC_GB_CL_EN;
+               arg = 0x00000001;
+       } else {
+               fprintf(stderr, "Unknown erase type: %s\n", argv[1]);
+               exit(1);
+       }
+
+       dev_fd = open(argv[4], O_RDWR);
+       if (dev_fd < 0) {
+               perror(argv[4]);
+               exit(1);
+       }
+
+       if (checkup_mask) {
+               ret = read_extcsd(dev_fd, ext_csd);
+               if (ret) {
+                       fprintf(stderr, "Could not read EXT_CSD from %s\n",
+                               argv[4]);
+                       goto out;
+               }
+               if ((checkup_mask & ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) !=
+                                                               checkup_mask) {
+                       fprintf(stderr, "%s is not supported in %s\n",
+                               print_str, argv[4]);
+                       ret = -ENOTSUP;
+                       goto out;
+               }
+
+       }
+       printf("Executing %s from 0x%08x to 0x%08x\n", print_str, start, end);
+
+       ret = erase(dev_fd, arg, start, end);
+out:
+       printf(" %s %s!\n\n", print_str, ret ? "Failed" : "Succeed");
+       close(dev_fd);
+       return ret;
+}
+
+
  int do_ffu(int nargs, char **argv)
  {
  #ifndef MMC_IOC_MULTI_CMD
mmc_cmds.h +1 -1
index 9d3246c..8331ab2 100644
@@ -45,3 +45,4 @@ int do_ffu(int nargs, char **argv);
  int do_read_scr(int argc, char **argv);
  int do_read_cid(int argc, char **argv);
  int do_read_csd(int argc, char **argv);
+int do_erase(int nargs, char **argv);
--

2.24.1 (Apple Git-126)

#6 lore raw
In reply to Avri Altman
Quoted 14 lines · Avri Altman

+Bean

Quoted 4 lines
Quoted 4 lines

From: Kimito Sakata <[email protected]>

Signed-off-by: Kimito Sakata <
[email protected]>

Quoted 8 lines

Hi Kimito,
Please use a proper subject and commit log body.
If you don't understand the difference between those two - please ask.
Also for consistency, you might want to use your oracle mail for your Signed-
off-by tag.
You need to change your git configs for that.

Quoted 10 lines

Also, can you refer to this patch submitted by Bean -
https://www.spinics.net/lists/linux-mmc/msg63582.html
Are you co-developing this together?

Thanks,
Avri

Quoted 2 lines

Thanks,
Avri

Kimito,
If you need my support as before. ping me.

Bean

#4 lore raw

Re: [External] : RE: [PATCH RESEND v3] mmc-utils: Re-submit of the erase command addition plus remval of MMC_IOC_MULTI_CMD ifndef for erase. Re-committing the change per request by Avir.

In reply to [email protected]
Quoted 9 lines · On Fri, 2021-04-23 at 08:27 -0600, [email protected] wrote:

Its basically the same changes. Bean was coaching me on how to send the

changes.

The only difference between Bean's submit and my last one is Ulf

requested me to make a change in my changes to remove the

Quoted 7 lines

MMC_IOC_MULTI_CMD #ifndef segments.

Thanks

Kimito

Kimito,

I just saw your last email. we need to re-submit this patch because the format is not correct. If you need me to resubmit it on behalf of you. let me know.

Bean

#5 lore raw

RE: [EXT] Re: [External] : RE: [PATCH RESEND v3] mmc-utils: Re-submit of the erase command addition plus remval of MMC_IOC_MULTI_CMD ifndef for erase. Re-committing the change per request by Avir.

Micron Confidential

Bean,

If you could help with this it would be appreciated!

Thanks,

Raj Kamdar

Micron Confidential

-----Original Message-----
From: Bean Huo <[email protected]>
Sent: Monday, April 26, 2021 2:41 AM
To: [email protected]; Avri Altman <[email protected]>; [email protected]; Bean Huo (beanhuo) <[email protected]>; [email protected]; Raj Kamdar (rkamdar) <[email protected]>; [email protected]; [email protected]
Cc: [email protected]; [email protected]; Kimito Sakata <[email protected]>
Subject: [EXT] Re: [External] : RE: [PATCH RESEND v3] mmc-utils: Re-submit of the erase command addition plus remval of MMC_IOC_MULTI_CMD ifndef for erase. Re-committing the change per request by Avir.

CAUTION: EXTERNAL EMAIL. Do not click links or open attachments unless you recognize the sender and were expecting this message.

Quoted 9 lines · On Fri, 2021-04-23 at 08:27 -0600, [email protected] wrote:

Its basically the same changes. Bean was coaching me on how to send the

changes.

The only difference between Bean's submit and my last one is Ulf

requested me to make a change in my changes to remove the

Quoted 7 lines

MMC_IOC_MULTI_CMD #ifndef segments.

Thanks

Kimito

Kimito,

I just saw your last email. we need to re-submit this patch because the format is not correct. If you need me to resubmit it on behalf of you. let me know.

Bean